Customer with Overlapping IPs talking to DC

Hi,
There is a scenario in which MPLS customers with overlapping IP addresses would like to access a shared resource in the Data Center. How this could be possible in MPLS?
Best Regards,
Shahzad.

[email protected] Guys for your responses.The issue is with the return traffic of customer having overlapping IP addresses.Does anyone have a reference to design and configuration document which would cover this requirement, may be using NAT?Cheers,Ahmed Shahzad Think green - keep it on the screen.This e-mail and any attachment is for authorised use by the intended recipient(s) only. It may contain proprietary material, confidential information and/or be subject to legal privilege. It should not be copied, disclosed to, retained or used by, any other party. If you are not an intended recipient then please promptly delete this e-mail and any attachment and all copies and inform the sender. Thank you.
NAT is the usual solution for this. NAT can be done on your PE or on an external device (such as a firewall) that interconnects MPLS domain with the shared services infrastructure. Following white paper on NAT with MPLS will provide you with enough information on how to do VRF-aware NAT:
http://www.cisco.com/en/US/partner/tech/tk648/tk361/technologies_white_paper09186a0080b40929.shtml
Atif

Similar Messages

OnMouseClicked event with overlapping custom nodes

I'm having a bit of an issue with overlapping nodes.
Essentially what I have are rectangular shaped custom nodes which, when an onMouseEntered event occurs, has an extended set of icons that fade in that are located on the above top right portion of the node. If I may use ASCII to illustrate :)
X
[ MyCustomNode ]
+(Blank spaces don't work too well so let's pretend the X is sitting on top of the node on the upper left corner)+
The X is an icon that simply deletes the node.
The problem occurs when the nodes are overlapping (i.e. one above the other, where the X icon is overlapping with the node above it). When I click on the X, the onMouseClicked event fires for the node above.
I've tried mucking around with disabling the node and using toFront() and toBack() as well, but no luck.
Now that I think about it (I'm sure this is related), I've noticed issues with text/labels interfering with the "click-ability" of an object that it is overlapping. Since the text generally occupies little pixels in terms of the width of the actual text, it just seems to only sometimes interfere with onMouseClicked events - if you click on the right spot that is. If you disable the node, do the pixels the text/label occupy become "dead"? as in that space cannot be used to initiate the onMouseClicked event of an object behind the text? Make sense?
Any ideas?

I've put up a picture for your reference: [http://imagebin.ca/view/Lj9C7q.html]
How it works is that each node can be clicked on, thus increasing its opacity to 1.0. Once "selected" there is a mouse enter/exit event for that particular node which allows the X icon to fade in/out to delete the node.
What's happening is that if you click on the X of the selected node, the node directly above (1432-1481) is being selected, although the deletion of the original node works fine.
Also the onMouseEnter event is firing for the "1432-1481" node if you hover over the X. As you can tell in the screenshot, the opacity is increased if you hover over an unselected node. You can see that the "1432-1481" is slightly brighter than the other nodes above it. Obviously the cursor is missing from the screenshot but it should make sense.

I have been a customer with Verizon, since 1996. Recently, my husband has been added onto my account. We have both been experience drop calls. My husband contact Tech support for over 2 weeks. We were pretty upset to be paying a lot of money for a service

I have been a customer with Verizon, since 1996. Recently, my husband has been added onto my account. We have both been experience drop calls. My husband contact Tech support for over 2 weeks. We were pretty upset to be paying a lot of money for a service that didn't work. Verizon advised us that would upgrade both of our phones (to see if that solved the problem). Ok...this is where Verizon has forgotten customer service rules. He order 2 phone...one for himself, one for me. 1st the wrong address on the package..Fedex couldn't deliver...2nd...missing condo number Fedex couldn't deliver again...(2nd call to Verizon)...3rd package was finally deliver with 1 phone...missing my phone. Contacted verizon rep...reorder my phone again..but sorry we cannot give the same price as quoted on 21April...even though...its our mistake...Ok...Ok..what a surprise..but we can do this...after 65 minutes...found a price that was a little bit more...fine...just order the phone....I reordered phone on 28April...on the April 29...no email..so I can Verizon for the 4times in a few days..sorry your order was delay due to our Fraud dept. OK...talked to fraud dept...ok..account is good..will release phone and ship. OK...Next day, no email with deliver confimation. Contact Verizon 5 times now...sorry..your order was cancelled...YES...cancelled again...2nd time now...but we can reorder...OK...sorry but we cannot honor that price that was quoted..really...agent messed up...again...but we can do this for you....I don't understand...your mistake...ALL the times...
Strange ...how my order gets cancelled twice by Verizon's mistake....yet you cannot honor prices that your agents quoted!!!
I didn't reorder the phone....I cannot in good faith same with a company that does not stand behind their own mistakes...and worse...they make the poor customer pay for it...
I will not be renewing my contact...its time to Cricket Wirless...which my sister-in-law loves for half the cost....

I hope that you aren't complaining about dropped calls INSIDE your condo because no amount of switching or upgrading devices will solve that.
VZW will not guarantee service inside of any structure. There are just too many factors. If the problem is inside then you might want to look at one of the following:
1.) Network Extender (may cause issues for others in a condo or apartment style setting)
2.) A Google Voice Number (Free with a Gmail email address), downloading Google Hangouts Dialer and forwarding your calls to the GVN so that you can make and receive calls over Wi-Fi.

Verizon Residential billed surcharges to his customer with his tricks

Verizon Residential billed surcharges to his customer with the tricks from verizon online bill pay system. I submitted several bill pay payments online for last month's bill, totally
about $48-$49. I indeed found the online bill pay system showed negative balance in "account balance" after I
paid several times. However, Verizon did not do with all the submit and only $43.66 was paid. Then Verizon
told me there is $3.90 balance was forwarded to this month and charged me $7 additional fee. The trick is,
verizon told that you paid full in the beginning but finally he discarded some payments and said that I still
own balance and surcharge me. This is not the first time Verzion did this. From last year there is at least
three times. In the past I talked with customer service to request waive the $7 surcharge fee. But this time
the customer service refuse. Since he refuse to waive the surcharge fee, I'd say either verizon play the
tricks to charge the customer additional fee, or at least his online bill pay system has important problem:
does not show correct balance to customer after customer paid some part of balance first. You know he told me
I paid fully then later he told me I did not. For this kind of late payment, the fault is not on customer, it
should be on Verizon himself. So I think Verizon should not charge addition fee in this case

Your issue has been escalated to a Verizon agent. Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases".
There you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions.

Overlapping IPs

Hi Guys,
we have different services that are connected to our CEs through MPLS network.
PEs are connected to CEs using multiple EBGP peering on different subinterfaces (one for each service)..
Now let's assume that there are overlapping IPs used on different VRFs (which is fine inside the MPLS network) but those IPs will be terminated to the CEs.
to give an example: let's say that CEs advertise network 172.16.10.0/25 for service (A) that is part of VRF (A).
and then they also advertise network 172.16.10.0/29 for service (B) that is part of VRF (B).
How would other CEs route traffic? will they be able to send traffic back to both VRFs or they will prefer the more specific subset and send all traffic back to VRF B ?
Thanks,

Hi,
Thats an interesting one.
If the LAN side of the CE's maintained the VRF separation then of course, you would expect no problems with that.
if the CE's have a GRT for LAN side and if those two prefixes were leaked into that GRT, then I guess GRT would end up with the two routes from different sources, the longest prefix rule would mean that anything falling into the /29 would still go via vrf B and everything else would go via vrf A.
so it would mean that legitimate traffic for 172.16.10.0/29 meant for destinations on VRF A would instead be sent via VRF B, while legitimate traffic for the 172.16.10.0/29 for destinations on VRF B would always get there ok. Basically, the longest prefix routing rule would come into play and break /29 for VRF A.
I think the same would go for a non VRF aware CE which is receiving the two prefixes from upstream PE's.
Cheers

Set Up Airport Extreme with Static IPs and DHCP same time

I have Verizon Fios to my Business with 5 Static IP Address. One of them must be assigned to the Airport Extreme Base Station. I have 5 iMacs needing internet connection of which 2 need to use a static ip,( Filemaker Server and my Mac OS X Web Server). I also use 2 iPhones with a custom App accessing that FileMaker Server via the internet too. I want to set up my Airport Extreme Base Station to have those 2 iMacs connected with static ips , which must NEVER CHANGE, via an ethernet cable and all the rest wireless with WiFi. Do to the size of my building I also want another Airport Extreme or Express to just expand the range from the Base Station for the wireless connections only. Looking at the Airport Internet Settings I only see 3 options for Connection Sharing, "Share A Public IP Address", "Distribute a range of IP addresses", "Off (Bridge Mode)". I'm thinking I need to give 1 IP Address to the Base Station, 2 ip addresses to my servers, then 1 ip address to share for my wireless DHCP connections. The additional Airport set to Off(Bridge Mode) to expand the base station. Please advise on how I would set up that base station to do this.

With respect to expanding the base stations range, in the Base stations Wireless Settings I would click to select "Allow this network to be extendeded". Then what settings would I need in the Additional Airport?
Note: Both AirPorts would have to be 802.11n models in order for this to work. The additional AirPort would need to be configured to extend the Extreme. (ref: AirPort Utility > Manual Setup > AirPort > Wireless > Wireless Mode = Extend a wireless network)
Would that NEED to be connected to the base station via ethernet cable or will it pick up the base station wirelessly?
Using the "extend" feature is intended to expand the wireless range of an AirPort with another wirelessly. You would not need to connect them by Ethernet. In this configuration, the additional AirPort would be in bridge mode and will pass through the IP information from the other base station's DHCP service.

PTMW problem with overlapping availability

Hi everyone,
I found a problem, in the PTMW, and I'd like to get a confirmation, that this is SAP error, and cannot be handled on the customer side with e.g. customizing, or BAdI.
The case is:
The employee gets the doubled amount if there is availability and overtime in the same time with overlapping days.
Example:
The normal Work schedule for the EE is from 8:00-17:00
There is an availability from 20:00 - 08:00 (end at the next day)
There is an overtime on the next day 10 hours
This means the EE works
00:00-08:00 - Availability                       8 hours
08:00-17:00 - Normal work schedule    9 hours
Overtime                                               10 hours
Summary                                               27 hours
The problem is that 27 > 24 But the PTMW lets me to save everything, but this is an error because the maximum number of hours is 24 in a day
I checked the PTMW, but for me it seems, this is a SAP error, and I can't customize the PTMW to handle this situation..
Does anyone know a customizing, or anything, where I can set the PTMW to handle correctly this situation?

JInternalFrames must be in a JDesktopPane.

Error while posting Customer with Multiple sales areas using DEBMAS05.

Dear experts,
We are generating IDOCS vis SAP DS for posting Customer master. The message type used is DEBMAS and basic type is DEBMAS05. we have a requirement to create 1 customer with multiple sales areas. However, we are ending up with a strange error: "Fill all required fields SAPMF02D 0111 ADDR1_DATA-NAME1". Despite the IDOC going into status 51, the customer gets created and the 1st sales area too. the 2nd sales area however is not created! The IDOC data definitely contains Name1, otherwise the customer would not have been created in the first place.
As the error message is related to the Address data, I also explored upon exploring this erorr further on the lines of Central Address management where in the ADRMAS and DEBMAS have to be passed together(IDOC Serialiization). OSS Note (384462) provides further details about this. One Important point from the note is:
"As you have to specify the logical name of the sending system among other things, SAP is not able to make any default settings in the standard systems. When you use the serialization groups delivered as a standard by SAP, the address objects are imported before the master objects.Thus the sequence address data before master objects must only be adhered to if one of the following points applies to your application:
Such fields are set as required entry fields that are only provided by the BAS in the Customizing of the customer or vendor master.
For your customers, contact persons exist to which a private address or a different business address is assigned.".
This is not the case in our situation, as we do not have required entry fields in customizing that are only provided by the BAS, so the error is all the more confusing and I am not too sure what the cause is.
If someone have experienced the same issue before and have found a solution to it, kindly help out.

I have found the cause and solution to this problem.
This error ”Fill all required fields SAPMF02D 0111 ADDR1_DATA-NAME1” and other similar errors like “Fill all required fields SAPMF02D 0111 ADDR1_DATA-SORT1“ which occurrs during the IDOC posting when there are more than one sales area or company code occurs when the customer number range is set up for Internal numbering. This means, that the number gets generated only at the time of save and upon debugging the IDOC, we found out that after creating the customer and the first sales area/company code record, the segment E1KNA1M is cleared completely! This is the reason, it throws an error which points to a mandatory KNA1 field as missing. (Like NAME1, SORT1 etc.)
This was resolved by splitting the IDOC into 2.
The solution is to First post only the KNA1 segment and create the customer.
In the second step, pass the IDOC with all other segments along with E1KNA1M, but pass only KUNNR in E1KNA1M and the rest of the fields in E1KNA1M as “/”: you would have got the KUNNR after the first step.
Important note: This requirement to split the IDOCs does not occur when the customer number is known upfront. (Meaning cases where the customer number is externally generated) I also tested this and created a customer with external numbering and I was able to post more than 1 sales area with the same IDOC.
I noticed multiple threads with the same issue, but none of it had a concrete answer. I hope this information will be useful for anyone facing similar problems.
Cheers
Venkat

Site-to-ste VPN with overlapped subnet.

Hi Friends
I have to set up site to site VPN with overlapped network ASA 5540 and checkpoint what is the best parctice to achive tis goal
Thanks in advance

It has to be configured on both sides.
X and Y are unused networks in this example: Site A has to hide 172.16.1.0/24 behind X when communicating to Y, site B has to hide 172.16.1.0/24 behind Y when communicating to X. The users in site A have to use Y as a destination, users in site B have to use X as destination. To make it usable for the users you should include the destinations in the DNS so that they never need the destination-IP.
On the ASA you describe the communication 172.16.1.0/24 -> Y with an access-list and add that ACL to your static-command. You find an example here:
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00808c9950.shtml
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni

Creation of customer with contact person detials using BAPI

Hi,
What is the standard BAPI for creating customer. I need to create the customer with contact person
details, what BAPI i can use for this, i was trying with 'BAPI_CUSTOMER_CREATEFROMDATA1' by populating structure personal data and copy reference data.. but it is giving some problem like currency is not entered..... can any one send me the sample code with this BAPI. Any help will be highly appreciated.
Thanks a lot in advance.

Hi,
What is the standard BAPI for creating customer. I need to create the customer with contact person
details, what BAPI i can use for this, i was trying with 'BAPI_CUSTOMER_CREATEFROMDATA1' by populating structure personal data and copy reference data.. but it is giving some problem like currency is not entered..... can any one send me the sample code with this BAPI. Any help will be highly appreciated.
Thanks a lot in advance.

Price determ. for a Customer with different ship to parties within

Dear all,
I will try to explain our need with an example.
We received a requirement from our sales department who wants to manage a sales price of a specific item which is dependent from a fixed quantity in case the order is placed for a customer with different destinations (different ship to parties).
The example is as below:
Sales Price for Customer and Material A is 50u20AC per pieces for a scale of 10 pz.
The condition type ZPR0 used is a copy of standard PPR0 and it has the following characteristics:
calculation type Q Quantity
scales basis C quantity basis and scale formula "0".
We receive an order by our Customer for 10 pz and for two destinations:
5 pz directed to the location MMM
5 pz directed to the location BBB
The customer is asking us to apply this price because the pre-requisit is satisfied but how can we determine automatically in the same order if the material A is present in several order items?
We create an order with two sales order items and in each one we specify the destination in the partner roles. How can we set the condition type in order to redetermine the exact price considering the total quantity of material whitin the same order?
I hope you can help me
thanks in advance
Andrea

Hi
Your question is not fully clear to me. But what I guess you are looking for a discount which will be applicable to only one order and not for the other orders even if those orders contain the same material.
If I am correct, than yoy can do it by setting the condition Update. Suppose, you want to give Customer-material specific discount,i.e. condition type K005. Activate the "condition update" check box in the condition type detail screen first.
Then, in VK31 ,create a condition record for K005 & save it.Go to the change mode (vk32) of the cond. record and now enter " 1 " in the " No.of orders" coulmn & save it.
Now if you will create an order, this discount will be applicable only for the first one order only and next order onwards it will be deactivated automatically.
Similarly,You can set it also in terms of quantity,if the condition is calculated based on quantity ,by putting the quantiy (up to what quantity you want it to be effective) in the "Max. condition base value" column.
Regards
Pradyumna
Edited by: pradyumna patel on Jun 24, 2008 11:28 AM

How to credit customer with special gl indicator

Dear all,
I want to credit customer with special GL indicator H for security deposits from customer. i am using T-code F-02 and using key 19 to credit it but it dose not allow me to credit the customer with special gl indicator.
plz help me?
Regards
Ahmed
Moderator: Please, avoid asking basic questions

Hi,
In down payment how you will debit the salaries.
Only vendor is debited with special gl and Bank is credited.
so are you making the advance payment with the request or directly making the down payment in f-48.
is 7 special GL indicator that you defined, as Standard is A.
Never change the standard transaction types of down payment.
Standard SAP will not allow to Park the payments.
Regards,
Padma
Edited by: Padma J on Jul 17, 2009 1:23 PM
Edited by: Padma J on Jul 17, 2009 1:26 PM

Error -200431, DAQmx Create Channel (AI-Voltage-Custom with Excitation).vi

Where is "DAQmx Create Channel (AI-Voltage-Custom with Excitation).vi" gone?
I tried to use this VI for force measurement with a NI PXI-4472. It responds with Error -200431, ... You Have Requested: More:Voltage:Custom with Excitation, You Can Select: Voltage, Sound Pressure:Microphone, ...
It seems for me to be an internal error of this VI, LabView Version is 8.6.1
Solved!
Go to Solution.

Hi T.Knox,
error -200431 is a measurement type error:
"Error -200431 occurred at an unidentified location. Possible reason(s):
Measurements: Selected physical channel does not support the measurement type required by the virtual channel you are
creating. Create a channel of a measurement type that is supported by the physical channel, or select a physical channel
that supports the measurement type."
The PXI-4472 (8 Inputs, 24-Bit Dynamic Signal Acquisition module for sound and vibration measurement) is the wrong device
for force measurement.
I also searched our website and found some helpful links:
http://zone.ni.com/devzone/cda/tut/p/id/3602#toc2
The PXI-4472 (http://sine.ni.com/nips/cds/view/p/lang/en/nid/5031) isn't listed as supported device for force measurement
there!
I hope this information helps you!
Regards
Suse
Certified LabVIEW Developer (CLD)

Credit block the customer with no transactions

I have a requirement i.e Credit Block the customer with no transaction for past 6 months
how can this be achieved

Hi
You need to decide first which transaction to consider i.e past six month sale order, delivery, billing etc.
If you want to consider the billing document for the sales history check - then take the help of ABAPer & write a logic in below user exit , while creating a sale order system should check if any bililng doc exist within last six month, if yes, there should not be a block if no, then set a block.
LVKMPFZ1: USER_CREDIT_CHECK1
To activate this block, go to OVA8, tick user1.
thanks

Customer with the payment card or credit card details

Hi All,
Good morning,
Can some one tell me how to pull or extract any customer with the credit card or payment details.
I need to have any customer with the above details. pls help..
regards,
Chandu

Hi, what T-Code did you use for this?
Thanks!

Customer with Overlapping IPs talking to DC

Similar Messages

Maybe you are looking for