Customisation of SAP Program
I am trying to customise standard SAP program SAPM07DR.
While I can copy it to a Z* Program, I am unable to create a Transaction code because the screens do not exist in the copied program.
How can I create the Transction code OR how can I copy the screens so that I am able to run the new Z* Program.
Well, I copied everything for the SAP program (SAPM07DR). If you do an SE80, for the program you dont find any screens. As such the program that I copied also does not have the screens on the listing.
But if you run the SAP program thorugh Tcode MB03, you will find that the first screen is 460.
Similar Messages
-
Fetching of multiple files from Application Server into SAP Program
Hi All,
I have a issue related <b>Fetching of multiple files from Application Server into SAP Program</b>.
Actual issue is as below.
In the <b>selection screen</b> of <b>my program</b> i will give <b>Application Server Path</b> as :
<b>/PW/DATA/SAP/D1S/PP/DOWN/eppi0720*</b>
Then the based on above input it should pick up all the files that are matching <b>eppi0720*</b> criteria.
Suppose if i am having <b>5</b> files with above scenario, i have to fetch all those <b>5</b> files at a time and place in my SAP Program.
All those 5 file's data should come into SAP at a time.
Can anybody tell me how can we solve above issue.
If any body has come across same issue please provide me with solution.
Thanks in advance.
Thanks & Regards,
Rayeez.If you want to get around the authorization check, you can do something like this.
report zrich_0001 .
parameters: p_path type epsf-epsdirnam
default '/usr/sap/TST/SYS/global'.
parameters: p_file type epsf-epsfilnam default 'CO*'.
start-of-selection.
perform get_file_list.
* FORM get_file_list *
form get_file_list.
types: name_of_dir(1024) type c,
name_of_file(260) type c,
name_of_path(1285) type c.
data: begin of file_list occurs 100,
dirname type name_of_dir, " name of directory. (possibly
" truncated.)
name type name_of_file, " name of entry. (possibly
" truncated.)
type(10) type c, " type of entry.
len(8) type p, " length in bytes.
owner(8) type c, " owner of the entry.
mtime(6) type p, " last modification date, seconds since 1970
mode(9) type c, " like "rwx-r-x--x": protection mode.
useable(1) type c,
subrc(4) type c,
errno(3) type c,
errmsg(40) type c,
mod_date type d,
mod_time(8) type c, " hh:mm:ss
seen(1) type c,
changed(1) type c,
end of file_list.
data: begin of file,
dirname type name_of_dir, " name of directory. (possibly
" truncated.)
name type name_of_file, " name of entry. (possibly
" truncated.)
type(10) type c, " type of entry.
len(8) type p, " length in bytes.
owner(8) type c, " owner of the entry.
mtime(6) type p, " last modification date, seconds since 1970
mode(9) type c, " like "rwx-r-x--x": protection mode.
useable(1) type c,
subrc(4) type c,
errno(3) type c,
errmsg(40) type c,
mod_date type d,
mod_time(8) type c, " hh:mm:ss
seen(1) type c,
changed(1) type c,
end of file.
call 'C_DIR_READ_FINISH' " just to be sure
id 'ERRNO' field file_list-errno
id 'ERRMSG' field file_list-errmsg.
call 'C_DIR_READ_START' id 'DIR' field p_path
id 'FILE' field p_file
id 'ERRNO' field file-errno
id 'ERRMSG' field file-errmsg.
if sy-subrc <> 0.
sy-subrc = 4.
exit.
endif.
* Read the file list and add to internal table.
do.
clear file.
call 'C_DIR_READ_NEXT'
id 'TYPE' field file-type
id 'NAME' field file-name
id 'LEN' field file-len
id 'OWNER' field file-owner
id 'MTIME' field file-mtime
id 'MODE' field file-mode
id 'ERRNO' field file-errno
id 'ERRMSG' field file-errmsg.
if sy-subrc = 1.
exit.
endif.
append file to file_list.
enddo.
* Write out the file list
loop at file_list.
write:/ file_list-name.
endloop.
endform.
Regards,
Rich Heilman -
Need to start a program in Oracle System (External) from sap program
Hi guys,
I need to start a program in another oracle based system from sap program by writing native sql statements.
Does anyone have idea how to do this.
Rgds,
RamHi,
Here is another sample for procedures.Kindly reward points by clicking the star on the left of reply,if it is useful.
Code Sample for writing a procedure with input and output parameters
REPORT zzz_jaytest.
* Getting the regno and total as input parameters
PARAMETERS : p_regno(10) TYPE c DEFAULT 'R1000',
p_total TYPE i.
data : v_total type i.
* In this procedure, we are updating the total of a regno given as input.
* Here two parameters used in the procedure are input parameters.
* We are updating the record of regno entered in selection screen and
* adding the total entered to the already existing total. We have to give semicolon
* for the statement inside procedure.
exec sql.
CREATE or replace PROCEDURE PROC1 ( p_regno in char, p_total in number )
IS
BEGIN
UPDATE stu_det SET total = total + p_total where regno = p_regno;
END;
endexec.
* This is the code to execute the procedure for update.
* While executing the procedure, the parameter variable should be
* preceded with colon :
EXEC SQL.
EXECUTE PROCEDURE PROC1 ( in :p_regno, in :p_total )
ENDEXEC.
* In this procedure, we are selecting the details for the regno entered
* as input. Here p_regno is input parameter and v_total is used as output
* parameter. So that we can use the retrieved value of v_total in our
* ABAP program
exec sql.
CREATE or replace PROCEDURE PROC2 (p_regno in char, v_total out char)
IS
BEGIN
select total into v_total from stu_det
where regno = p_regno;
END;
endexec.
* This is the code to execute second procedure.
EXEC SQL.
EXECUTE PROCEDURE PROC2 ( in :p_regno, out :v_total )
ENDEXEC.
write : / 'Total of ', p_regno, ' is ', v_total. -
Loading records from .csv file to SAP table via SAP Program
Hi,
I have a .csv file with 132,869 records and I am trying to load it to an SAP table with a customized SAP program.
After executing the program, only 99,999 records are being loaded into the table.
Is there some setting to define how many records can be loaded into a table? Or what else could be the problem?
Pls advice.
Thanks!!!hi Arun ,
A datasource need a extract structure to fetch data .It is nothing but a temp table to hold data.
First you need to create atable in SE11 with fields coming from CSV file.
Then you need to write a report program to read you CSV file and populate your table in BW .
Then you can create a datasource on top of this table .
After that replicate and load data at PSA and use to upper flow.
Regards,
Jaya Tiwari -
How to find out Which SAP programs are affecting Which Z programs?
Do we have a program/tool that can tell us the following:
How to find out Which SAP programs are affecting Which Z programs in the entire development server?
We have a list of SAP programs and a list of custom u2018zu2019 programs, which ones impact each other? I know we have a u201Cwhere usedu201D functionality, however that is at the object by object level.
We need are looking for something a little larger u2013
thanks in advance
VishnuDo we have a program/tool that can tell us the following:
How to find out Which SAP programs are affecting Which Z programs in the entire development server?
We have a list of SAP programs and a list of custom u2018zu2019 programs, which ones impact each other? I know we have a u201Cwhere usedu201D functionality, however that is at the object by object level.
We need are looking for something a little larger u2013
thanks in advance
Vishnu -
Z search field in standard sap program
Hi,
I would like to ask if Z search field can be created in the standard SAP program.
Basically I need modify the search field used when searching for Business area in creation of asset master data (tr. AS01).
It shows the list of table tgsbt. But I would like to exclude by default some rows of the table and also would like to sort it in different way (by text).
Is that possible, if so, could anyone give me a hint how to do that?
Many thanks,
HonzaHi Jan,
Please go thorugh the below link.
http://wiki.sdn.sap.com/wiki/display/Snippets/ImplementingSearchHelp+Exits -
How to uncomment code in Standard SAP Programs
Hi Experts,
how to uncomment entire code of standard SAP programs which is commented .
Standard SAP Program is fully commented,i have to uncomment it ,to work it as normal.
i saw that some lines * / * like this are there in the commented code .
what is the way to un comment this ?
Thanks in advance,
Regards,
HituWell, if it is commented by your company - This doesnt ask for access key but if it is commented by SAP and you want to uncomment, you need access key.
You can ask basis guys to get access key for the object. you need to provide the program name and other information.
Other information: - go to the GOTO on application tool bar and select object direct entry.... you need to provide the full object key.
To uncomment the code - select the lines and right click - uncomment . This can only be done in editable mode. -
Getting run time errors while executing the copied SAP programs
Hi folks,
i want to copy an sap program.after coping i need to change some coding there.then i have to create a new transaction for that.
i am just copying the sap program RQEEAL10(transaction-QA32) to Z_RQEEAL10. it has 4 include programs.i am copying them to z programs like
RQ00MF10 copied to z_RQ00MF10
RQALVF14 copied to z_RQALVF14
RQALVF16 copied to z_RQALVF16
RQALVTOP copied to z_RQALVTOP.
now i am executing that program Z_RQEEAL10.but i am getting run time errors as given below.
<b>runtime error---</b>
The termination occurred in the ABAP program "Z_RQEEAL10" in
"SELECT_FIELDS_MANIP2_F16".
The main program was "Z_RQEEAL10 ".
The termination occurred in line 257 of the source code of the (Include)
program "RQALVF16"
of the source code of program "RQALVF16" (when calling the editor 2570).
--Error in ABAP statement when processing an internal table.
--When changing or deleting one or more lines of the internal table
"\PROGRAM=Z_RQEEAL10\DATA=SELECT_FIELDS" or when inserting in the table
"\PROGRAM=Z_RQEEAL10\DATA=SELECT_FIELDS", 0 was used as
the line index. An index less than or equal to zero is not
allowed.
The error can occur when using the following options:
1. "INDEX idx" for specifying the line number in the table
"\PROGRAM=Z_RQEEAL10\DATA=SELECT_FIELDS"
where you want to change, insert or delete.
2. "FROM idx" for specifying the start index when deleting a line
area from or inserting a line area into the table
"\PROGRAM=Z_RQEEAL10\DATA=SELECT_FIELDS".
3. "TO idx" for specifying the end index when deleting a line
area from or inserting a line area into the table
"\PROGRAM=Z_RQEEAL10\DATA=SELECT_FIELDS".
When the program terminated, the table had 2 lines.
these r the runtime errors what i am getting.where is the problem?i have activated all interface & includes.plz advice.
Thanks & regardsHi Madhu,
I will give you one more check point where you have to give your concentration while copying the standard programs....
Call Customer-Function (Function Exists) if any in the Program when copied will not get executed. Instead you need to call the FM Directly.
one more is also here
You are likely to have some problems with the text-elements and translation that may have been maintained for the original report.
~~Guduri -
How to call a Standard SAP Program in Zprogram.
Hi,
how to call a SAP Standard program in SAP Program?
Do we have to use any funtion module and pass paramters?
I want to call a Standard SAP prg in to my prgram? can anyone explain me or give the piece of code to call standard prg.
Thanks & RegardsAgain, ABAP related questions should be asked in the ABAP forum.
To answer you question, if the standard program is a report program, you can use the SUBMIT statement and pass parameters using the WITH Extention.
Submit <report>
with p_fld = 'X'
and return.
Please make sure to award points for helpful answers and mark your posts as solved when solved completely. Thanks.
Regards,
RIch Heilman -
How to change standard SAP program SAPLFSKB to add custom fields...?
Hi Gurus,
I have to change the standard SAP program SAPLFSKB screen 100 to add custom fields...i looked into OSS notes and there is a note: 174413 that provides steps to add custom fields...but when i try to do this it doesnt let me do it...it says that request cannot be changed....do i have to use modification agent...if that is the case then how shud i proceed with this....so please provide me some inputs....
your help will be appreciated...
Any inputs for me....
cheers:sam
Message was edited by:
Sam williamstry going into edit->enhancement operations->create. this will allow up to add your customized field.
-
How to change the field length in standard sap program.
Hi All,
How to change the field length in standard sap program.
Urgent
Example:
Text1 type c length 75,
To change :
Text1 type c length 150,
Point will be rewarded..
Thank you,
Vikram.CIf the only solution is to change the sap standard program, simply change the program, it will prompt for an access key. This key can be retrieved in the SAP support portal (service.sap.com) at keys and requests, sccr keys, register object.
Sometimes these actions are outsourced to a competence center, so maybe youre not entitled to do this, in any case ask a resident senior developer for support.
regards, Rob -
How to use a function key on keyboard for executing a non SAP program
Hello Gurus.
My client want to run a non SAP program selecting the specific function key on keyboard during the entering data on SAP.
i knew that it is possible to execute a non sap program after adding special program each by SAP program. but, it is huge jobs.
client wants to run a non sap program wherever he is on SAP program. Is it possible ?Hi,
1. Create a ".exe" file for the .NET application.
2. Create a PF-STATUS and assign the Function Code for the desired Function Key in the SAP program.
3. In the USER COMMAND code inside program, when the respective function code is triggered, write the below code with the path to the .NET exe file.
CALL METHOD cl_gui_frontend_services=>execute
EXPORTING
document = '.NET exe file path'
EXCEPTIONS
OTHERS = 1. -
We are in the process of upgrading our SAP from 4.6c to 6.0 and I am looking for a document or white paper that summarizes changes to Standard SAP Programs, Tables/Fields, Function Modules etc.. from what used to be in SAP 4.6c to what it is in SAP 6.0. I am not sure if such a comprehensive document exists or is posted in the forum.
Any help or information in this regard will be highly appreciated.
Thanks
ramHi Ram,
<< We are in the process of doing our technical upgrade from SAP 4.6c to 6.0. I am looking for a white paper or documentation listing the changes made to the standard SAP Programs, Tables, Fields, Function Modules etc. from Rel. 4.6c to 6.0. >>
Do you want to know what custom changes were done to SAP standard objects in your system or do you want to know what changes SAP did from 4.6c to ECC6.0.
There is no white paper or documentation to find out custom changes made to SAP standard objects. but there were many tools in the market to find out and tell what changes were done to sap standard objects in your system.
Your question seems ambiguous please clear it.
Thanks,
Kiran. -
Standard SAP program name for the data extraction
Please tell me the stadard SAP program for the data extraction for Material, Vendor and Customer.
you might want to explore tx. SXDA.
-
User Exit that will allow the SAP program to create DN, but not create IDO
Hi all,
The requirement is when we select 1 PO in VL10g transaction and click the u201CBackgroundu201D button, the user exit will allow the SAP program to create Delivery Number, but not create IDOC for the Delivery Number to send it to warehouse system. Also the created Delivery Number must be in changeable mode in ECC system .I need to find any exit to make the DN table field LIKP-VLSTK not to be u201CBu201D (distributed). The B will make DN not changeable in ECC system which is hard coded value in standard program. so the DN should be changeable.
Please suggest me the User Exit name which serves my purpose.
Thanks in advance
Latha.Welcome to SCN!
Here is some code that will allow you to find exits and BADIS on your own:
[Code To Find BAdi|https://wiki.sdn.sap.com/wiki/display/ABAP/CodeToFind+BAdi]
Rob
Maybe you are looking for
-
Linked Office 2013 Home and Business to incrorrect Microsoft account.
Hi Guys, I was installing Office 2013 Home and Business for a customer and I accidentally linked the Office product key to my own personal Microsoft account. How can I transfer this to the customers correct Microsoft account? Thanks Aled
-
My computer crashed. how do i restore my content from my phone back to my computer
how do i restore my content from my phone to my itunes on a new computer
-
I am trying to download an album for my kids onto my old (3G) iphone. All other songs/albums work fine. This one says it can't be read. Thanks for your help.
-
Cannot create an OracleConnection programmatically with C#
Using Visual Studio 2008 and C# on a Windows VISTA SP1 development machine. I have installed the latest InstantClient and the additional SQLPlus files on the dev machine then followed install instructions to the best of my knowledge. I am working on
-
Facetime HD not working in Windows 8.1
Hello ! I'm trying to use the webcam of my Macbook Pro 15 (Mid 2012) under Windows 8.1 64 via Bootcamp. Whatever software I'll use will give me a gray picture. The little green dot is there, and when I go in the camera settings under Skype, I can see