Customize FBA page using SharePoint Designer (possible?)

Hello everyone, I've been searching everywhere and can't seem to find a solution :(
I'm trying to customize this page
And just add a text on it. Is there a way to do it in SP Designer ? All I've been getting on searches is do in in VS.
Thanks in advance
AJ MCTS: SP 2010 Configuration MCSA: Windows 7 If you find this post useful kindly please mark it as an answer :) TY

You don't actually customize this page, instead you create a new one and deploy it as a SharePoint Solution. This is why Visual Studio is required.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Similar Messages

Create Custom Application Page using SharePoint designer

Hi All,
I have a task to create the Custom Application page using SharePoint designer.Can any one help me how can I do this.Can any one help me how can I achieve this
Samar

Hi Samar,
By application page do you mean writing C# code from SP designer? If so as far as I know you can't write C# code from designer, you have to use Visual Studio for it.
But if you only want an aspx page with some JS code you can create one from "all files" in designer. you will see files menü on ribbon from where you can create aspx page.
Best regards,
Mustafa Yılmaz
Best Regards, Mustafa Yılmaz MCITP, MCPD | www.mustafa-yilmaz.org | www.sharepointciyiz.biz

Insert webpart zone in tabs in webpart page using sharepoint designer 2010

Hi All,
I am facing a problem , its looks very easy but i couldn't found any clue about this.
i have created a webpart page, after this i have enable to view quick launch in this webpart page. then i have create a some tabs with reference to this site
https://jqueryui.com/tabs/. but the problem is when i go to view my page in browser it take same height which is same as quick launch height. and in my diff scenario i have created tab using content editor web part then its working fine. but
i need to create web part zone in these tabs that why i m not able to do this using content editor. so i am using designer only.
i guess i am writing content in wrong content place holder or etc. please help me ...i have already lost my 2 days for this.
FYI, please find the code which i used in webpart page using share point desinger.
<asp:Content ContentPlaceHolderId="PlaceHolderPageTitle" runat="server">
<SharePoint:ListItemProperty Property="BaseName" maxlength="40" runat="server"/>
</asp:Content>
<asp:Content ContentPlaceHolderId="PlaceHolderPageTitleInTitleArea" runat="server">
<WebPartPages:WebPartZone runat="server" title="loc:TitleBar" id="TitleBar" AllowLayoutChange="false" AllowPersonalization="false"><ZoneTemplate>
<WebPartPages:TitleBarWebPart runat="server" AllowEdit="True" AllowConnect="True" ConnectionID="00000000-0000-0000-0000-000000000000" Title="Web Part Page Title Bar" IsIncluded="True" Dir="Default"
IsVisible="True" AllowMinimize="False" ExportControlledProperties="True" ZoneID="TitleBar" ID="g_14e08bcc_e32c_4759_80dc_34e124e6212f" HeaderTitle="abc1" AllowClose="False" FrameState="Normal"
ExportMode="All" AllowRemove="False" AllowHide="True" SuppressWebPartChrome="False" DetailLink="" ChromeType="None" HelpLink="" MissingAssembly="Cannot import this Web Part." PartImageSmall=""
HelpMode="Modeless" FrameType="None" AllowZoneChange="True" PartOrder="2" Description="" PartImageLarge="" IsIncludedFilter="" __MarkupType="vsattributemarkup" __WebPartId="{14E08BCC-E32C-4759-80DC-34E124E6212F}"
WebPart="true" Height="" Width=""></WebPartPages:TitleBarWebPart>
</ZoneTemplate></WebPartPages:WebPartZone>
</asp:Content>
<asp:Content ContentPlaceHolderId="PlaceHolderTitleAreaClass" runat="server">
<style type="text/css">
Div.ms-titleareaframe {
height: 100%;
.ms-pagetitleareaframe table {
background: none;
</style>
</asp:Content>
<asp:Content ContentPlaceHolderId="PlaceHolderAdditionalPageHead" runat="server">
<meta name="GENERATOR" content="Microsoft SharePoint" />
<meta name="ProgId" content="SharePoint.WebPartPage.Document" />
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<meta name="CollaborationServer" content="SharePoint Team Web Site" />
<script type="text/javascript">
// <![CDATA[
var navBarHelpOverrideKey = "WSSEndUser";
// ]]>
</script>
<%--<SharePoint:UIVersionedContent ID="WebPartPageHideQLStyles" UIVersion="4" runat="server">
<ContentTemplate>
<style type="text/css">
body #s4-leftpanel {
display:none;
.s4-ca {
margin-
</style>
</ContentTemplate>
</SharePoint:UIVersionedContent>--%></asp:Content>
<asp:Content ContentPlaceHolderId="PlaceHolderSearchArea" runat="server">
<SharePoint:DelegateControl runat="server"
ControlId="SmallSearchInputBox"/>
</asp:Content>
<asp:Content ContentPlaceHolderId="PlaceHolderLeftActions" runat="server">
</asp:Content>
<asp:Content ContentPlaceHolderId="PlaceHolderPageDescription" runat="server">
<SharePoint:ProjectProperty Property="Description" runat="server"/>
</asp:Content>
<asp:Content ContentPlaceHolderId="PlaceHolderBodyRightMargin" runat="server">
<div height="100%" class="ms-pagemargin"><img src="/_layouts/images/blank.gif" width="10" height="1" alt="" /></div>
</asp:Content>
<%--<asp:Content ContentPlaceHolderId="PlaceHolderPageImage" runat="server"></asp:Content>
<asp:Content ContentPlaceHolderId="PlaceHolderNavSpacer" runat="server"></asp:Content>--%>
<%--<asp:Content ContentPlaceHolderId="PlaceHolderLeftNavBar" runat="server"></asp:Content>--%>
<asp:Content ContentPlaceHolderId="PlaceHolderMain" runat="server">
<html lang="en">
<head>
<meta name="WebPartPageExpansion" content="full" />
<meta charset="utf-8">
<title>jQuery UI Tabs - Default functionality</title>
<link rel="stylesheet" href="http://code.jquery.com/ui/1.10.3/themes/smoothness/jquery-ui.css">
<script src="http://code.jquery.com/jquery-1.9.1.js"></script>
<script src="http://code.jquery.com/ui/1.10.3/jquery-ui.js"></script>
<link rel="stylesheet" href="/resources/demos/style.css"><script>
$(function() {
$( "#tabs" ).tabs();
</script></head><body><div id="tabs">
<ul>
<li><a href="#tabs-1">Bangalore 1</a></li>
<li><a href="#tabs-2">Bangalore 2</a></li>
<li><a href="#tabs-3">Bangalore</a></li>
<li><a href="#tabs-4">Chennai 4</a></li>
</ul>
<table cellpadding="4" cellspacing="0" border="0" width="100%">
<tr>
<td><div id="tabs-1"> <%--id="_invisibleIfEmpty" name="_invisibleIfEmpty" valign="top" width="100%"> --%><WebPartPages:WebPartZone id="g_6958510ECBD74ABD8AA9F8E26B747B27"
runat="server" title="Zone 13"><ZoneTemplate></ZoneTemplate></WebPartPages:WebPartZone><WebPartPages:WebPartZone id="g_FA3DDD09582A4C589559877B7169340D" runat="server" title="Zone 14"><ZoneTemplate></ZoneTemplate></WebPartPages:WebPartZone></div></td>
</tr>
<tr><td><div id="tabs-2">
<WebPartPages:WebPartZone id="g_73928F4B9F484EE392EBCBA7D5ACF9FE" runat="server" title="Zone 1"><ZoneTemplate></ZoneTemplate></WebPartPages:WebPartZone>
<WebPartPages:WebPartZone id="g_77B2328C81874FFB8034559174B450BF" runat="server" title="Zone 12"><ZoneTemplate></ZoneTemplate></WebPartPages:WebPartZone>
</div></td></tr>
Please help..if u need any other detail i ll provide you.. plz check the image after doing this the tabs take full range as quick launch.
Thanks
Vivek Singh Tomar

You do not need to work on visual studio, you can create page layout form web and sharepoint designer. Page layouts are only available on publishing sites, you can modify page layout using sharepoint designer, add your required html and web part zones.
Check below few links for reference:
http://msdn.microsoft.com/en-us/library/gg430141(v=office.14).aspx#bk_custompagelayout
http://www.mssharepointtips.com/tip.asp?id=1125
http://blogs.technet.com/b/tothesharepoint/archive/2013/04/10/stage-7-upload-page-layouts-and-create-new-pages-in-a-publishing-site.aspx
http://msdn.microsoft.com/en-us/library/gg430141(v=office.14).aspx#bk_custompagelayout
Page layouts creation and editing is almost same in MOSS 2007, SharePoint 2010 and SharePoint 2013. If you are creating page layout using web then you can easily modify it using SharePoint designer.
Adnan Amin MCT, SharePoint Architect | If you find this post useful kindly please mark it as an answer :)

How to add js files to sharepoint page using sharepoint designer

how to add js files to sharepoint page using sharepoint designer

Upload the files to your site collection into the site assets library or into the style library, depending on perference.
Then you can include the JS files either in the master page, page tempalte or using web parts.

Add js files to sharepoint page using sharepoint designer

Hi
My self Arun Darly
I want to call my custm.js file on click event of my share point designer page
I placed my "custm.js" in " /_layouts/1033/JS/project/custom.js" and given the reference in the master page as like below
<script type="text/javascript" src="/_layouts/1033/JS/project/custom.js"></script>
but on click event I am not getting the Function() which was i written in the custm.js file
so please help me if any one know how to call that custm.js file to lode the function
Thanks in advance.
Arun Darly

Thanks
Geetanjali Arora for replying me
I tried to call the .js file by using button click event but I am not getting the method and I checked my Custm.js file is not loaded so I placed script in aspx page then only
I am getting that function .
But I want to call my custm.js file on click event of button
Thanks in advance.
Arun Darly

Issue with inserting edit item form using sharepoint designer 2013

Hi,
I inserted an edit form of a custom list in a site page using sharepoint designer-2013. But it is giving error "no item exists".
I am using default ListItemId Parameter with ID query string and I passed the query string parameter to that page. But still the result is same. But if I give any default value, page is displaying fine for that specific item although I dont pass any querystring
to the page URL.
Can you please guide me?
Thanks in advance.
Regards,
Chaitanya

Hi,
From your description, I know you get issue when you add “edit form” of custom list to a page.
I tried to reproduce your issue, and if I added “edit form” to page without “Advanced Mode”.
I add “edit form” to page with steps below:
Right click the page, click “Edit File in Advanced Mode”.
Find source with keywords [ContentPlaceHolderId="PlaceHolderMain"].
Choose INSERT tab in the Ribbon.
Click “Edit Item Form”, and choose the custom list that you want to add.
Save file, and go to the page.
The screenshot below is my result:
Best Regards,
Vincent Han
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Customize Approval Form to add custom fields using SharePoint Designer

Hi,
i have a created a Custom approval workflow using SharePoint Designer 2010. This is two steps approval WF, All i did put the variable "CancelonRejection" Value "Yes" and one Approval action with 2 different users as Serial. Right now
Status, Requested by, Consolidated comments and comment fields are available on the approval form. Now i want to add some fields with radio buttons on Approval Form, so that 1st approver can select those radio/check box. Once 1st approver will approved this
then display all the values on 2nd approver approval from or send email to 2nd approver along with all the information from 1st approver.
Thanks in advanced!

Hi,
According to your post, my understanding is that you wanted to customize Approval Form to add custom fields using SharePoint Designer.
In the SharePoint Designer, you can customize the task form.
Here is a great article for your reference:
Creating Custom Workflow Task Approval Forms with SharePoint Designer 2010
However, every task can only have one task form.
That is to say, the two approvors will have the same task form.
As a workaround, I recommend to customzie the task form using InfoPath.
You can create different view for the approvors.
You need to add form load rules to swich views based on the approvors.
More information:
Using Multiple Views in Customized List Forms
Add, delete, and switch views (pages) in a form - InfoPath
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Can we customize any other expect SharePoint Sites using Sharepoint Designer

Hi All,
Can we customize any other expect SharePoint Sites using Sharepoint Designer?
Thanks in Advance!

As Hemmendra, the tool is specifically designed for SharePoint. Both this and another tool derive from an older utility called FrontPage, which was an early Web Authoring product, before the age of standards and the like.
The other product that evolved into a paid development tool but is now free is one called Expression Web. This can do more web specific stuff and may be of use for you. It was made a free product a year ago though and can be found here.
http://www.microsoft.com/en-gb/download/details.aspx?id=36179
What else were you looking to achieve?
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

Can we have approve/reject action button in email sent using SharePoint designer or do we need to custom code it?

Hello,
for particular item approval, when user receives an email, can email contain button of approve/reject or if user just replies to that mail using one word "Approve/Reject", so that item value should get updated in list and also get approved.
Is it possible using SharePoint designer workflow or custom code workflow or Nintex workflow?
Please guide.
Thanking you in advance.
Regards,
Jayashri

Follow these steps:
You can create custom page with code to approve/reject item.
Then you should pass item id (and other information if needed) in a query string.
In a workflow you can generate a link to the created page and add it to email body.
When a user will receive email, he/she will click on the button (link), then new tab with created page will be opened, where your custom code will approve an item.
[custom.development]

Cannot edit pages in SharePoint Designer 2007 "The Server could not complete your request...

Hi All,
We are using SharePoint Designer 2007.When we try to open any page in designer we get following error,
"The Server could not complete your request. Contact your Internet Service Provider or Web server administrator to make sure that the server has the FrontPage Server Extensions or SharePoint Services installed"
If I click on Details button then I get the following message
"Object moved. Object moved to here."
Anyone experienced anything like this before?
Also when I try to edit sites when browsing on IE and than clicking on "Page" and "Edit in SPD2007" it's always
opening login.aspx site in SPD and that is the only one I can edit.
Kindly, please help me on this issue.

Hello,
I have found one link for same issue, you might want to try it out:
http://voices.yahoo.com/sharepoint-designer-error-server-could-not-complete-7419812.html
Have you modified the custom provider in config file? Also see this link if this is the case for your second issue:
http://support.sharepointsolutions.com/entries/131560-Role-Manager-feature-has-not-been-enabled
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

How to edit an existing page in SharePoint designer and add custom javascript

When I edit an existing page in SharePoint Designer to add JavaScript and save, I get a dialog with message
"Content in the embedded form field may be changed by the server to remove unsafe content. Do you want to reload you page to see the results of the save?"
When I click OK it reverts my change. How do I add custom JavaScript to the page?

Try not to push your changes through SharePoint Designer (SPD).
We had severe problems with SPD saving page layouts in SharePoint, so you may use SPD to edit the page but not save it.
To save it, check it out from browser, upload and overwrite then publish it.
THosE wHo doN'T apPreCiATe LiFe, DOn't DeSerVe iT

Cannot see the Previous Versions using SharePoint Designer 2013 - Versions cannot be accessed at this time.

I was trying to view the Version History of a page from the SharePoint Designer 2013, I got the following error. "Versions cannot be accessed at this time, because the server is busy. Please try again later.
Whereas I can able to access the version history through browser, the issue only occurs in SharePoint Designer.
Thanks
Ramkumar

Hi Ramkumar,
I understand that when you use SharePoint designer 2013 to check previous version of a page, it will pop up the error window. This is a known issue and here are two feasible workaround:
1.Use SharePoint designer 2010 to connect SharePoint 2013 site.
2.In SharePoint Designer 2013, use the Versions pane in the Page Summary view to access detailed version information of a file. You can access the Page Summary view by:
a. (Left) Clicking on a filename in the Site Pages list.
b. Select a file Site Pages list by clicking anywhere in the row (except the filename) and then clicking on “Page Settings” in the Site Pages.
c. Restore the required version.
Thanks for the understanding and support.
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Edit webpart properties using sharepoint designer workflow

Hi Guys,
I am not sure if there is any way to Edit properties of Excel Web Access WebPart using SharePoint Designer Workflow. I want to change workbook source of a web part on specific date.
I don't have environment to write custom code.
Thanks, Nilesh

Hi,
Per my knowledge, we can't achieve your requirement using SharePoint Designer Workflow.
We have to use custom code to achieve it. The following articles for your reference:
How to: Work with Web Parts on a Page Using JavaScript
http://msdn.microsoft.com/en-us/library/office/hh185010(v=office.14).aspx
Programmatically Update the SharePoint Web Part Properties on the List Forms
http://nikpatel.net/2010/11/04/programmatically-update-the-sharepoint-web-part-properties-on-site-pages/
ExcelWebRenderer class
http://msdn.microsoft.com/en-us/library/microsoft.office.excel.webui.excelwebrenderer(v=office.15).aspx
Best Regards
Dennis Guo
TechNet Community Support

Leave Request Workflow using SharePoint Designer

Hi Support,
Can you give me a link or specific procedure on how to make leave request using sharepoint designer connected to sharepoint foundation 2013. This is my first time to make it, s there's something doubt in my mind. Please help me as soon as possible.
Thanks
Best Regards,
Bishelp :)

Hi Bishelp,
Besides the article which cool_anurag suggested, Here is a video about Leave request Workflow please check whether it is helpful:
https://www.youtube.com/watch?v=9IYI8xHpBPE
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

Workflow created using sharepoint designer 2013 is not getting started and the initiator is Anonymous.

Hi All,
I have created a Site and List Workflow using SharePoint designer 2013, its a simple list workflow with one stage init on creating an item.
When i verified the status of workflow its showing as initiator = Anonymous and Internal Status - Not started. Please a screen shot below
Looking forward for your help.
Thanks in Advance.
Sunitha

Below is the solution.
Solution:.
check
list in workflow manager server :
1. Check https://[wfms]:12290 or http://[wfms]:12291 if they are responding 2. Check
”WorkflowMgmtPool” is started 3. Following services are running
Workflow Manager Backend
Service Bus Message Broker
Service Bus Gateway
Windows Fabric Host Service (FabricHostSvc)
4. Get workflow farm information , workflow database by Start Workflow
Manager PowerShell get-WFfarm 5. Check if the Workflow Manager farm running(workflow service backend and front end should be rennin) by Start Workflow Manager
PowerShell get-WFfarmStatus
6. Check oAut in accessible by http:// [wfms]:12291/$SYSTEM/$Metadata/json/1
7. Restart the WorkflowServiceBackend service
net stop WorkflowServiceBackend
net start WorkflowServiceBackend
Reference Link
http://blogs.msdn.com/b/laleh/archive/2014/09/03/sharepoint-2013-workflow-troublehsooting.aspx
Thanks all.
Sunitha

Customize FBA page using SharePoint Designer (possible?)

Similar Messages

Maybe you are looking for