Customize Font in Pivot Table OBIEE 10g

Hi All,
I have the Pivot table like this:
Item                Value
A                     1
B                     2
C                     3
Total A-C         6
D                     1
E                     2
F                     3
Total D-F          6
How to bold the Total A-C and its value?My version is OBIEE 10g
Thank you before
Regards
JOE

Hi Joe
In 10g
1st change the View from Compound Layout to "Tabular View"
2nd.. as you told the A-C total is needed, in the tabular view at Answers......navigate to that field/column & find Sigma (Summation Symbol) ..
3rd, by clicking on it..you will get the Totals in Bold Letters
Please mark Correct if this helps you
Regards

Similar Messages

Hiding columns in pivot table OBIEE 11g

Hi experts,
I am trying to create a pivot table with individual values in columns but I also need to display a grand total as values but also as percentage and as cumulative percentage.
I duplicated the measure once in the measure area, and selected display data as percentage of column, and another time using display cumulative and percentage of column.
The result is fine, but all the elements are displayed as column for the percentage and for the cumulative. Or, I only need the Grand Total Percentage and Cumulative, but I don't need all the columns for Percentage and cumulative.
I have tried to find out a way to customize the XML but nothing good.
Is there a way to display only the grand total for percentage and cumulative without having to display all the individual columns?
Any help highly appreciated.
Regards

If I get your question correctly.. You are trying to present the grand total towards the end of the Pivot and OBIEE is displaying the totals of all the sections and then the Grand Total.
Try not to use the grand total of the sections but create a new pivot view and just display the grand total in that view.
So you will have your normal sections and then another pivot view just for the grand total.
As far as I know, there is no option to hide the individual section totals.

Calculated item in pivot table - OBIEE 11g

Hi,
I need to display only the calculated items in my pivot table and I want to hide the other members. I am using OBIEE 11.1.1.5.0.
Is it possible to have different selection steps for different views.
Please help.
Thanks,
Prabhu S.

Hi Dhar,
Thanks for your answer. I want to use section wise display in pivot table and need to show only the calculated members in the sections.
I need to hide other values of the particular section column.
Thanks,
Prabhu S.

Bordering options in pivot table Obiee

Hi,
I have a requirement in OBIEE pivot table where I have to put borders across columns for the pivoted data.
For Pivoted data as below I want bold borders for the area a-b,c-d and e so that we can differentiate between them. This doesn't seem to be possible in criteria section as the data is being pivoted from results section and the below structure would appear only there.
A
B
C
D
E
17,573
915
1,638
15,200
9,033
22,877
572
3,280
19,466
11,898
45,400
2,883
5,092
37,704
17,435
23,225
2,130
5,339
16,125
8,753
Any help is greatly appreciated.
Thanks.

Hi Sreeni,
Thanks for the reply. but that would apply borders for all the columns..right? I want to group one or more columns with a similar border and it should include both the Measures column and the Measure labels column.

Creating Compound lay out with two different pivot tables OBIEE 11g?

Hello,
I am trying to add two different pivot tables in one compound lay out and add a view selector to it, so that i can choose one at a time. Please advice how can i do this.
Thanks

First of all, the expression is "please advise" not "please advice." I thought I'd mention it because I see it so much in the forum. :) (Freebie.)
Okay, on the surface, your question seems so basic that it makes me wonder what you mean. If you are absolutely brand-new to OBIEE than consult the manual:
http://download.oracle.com/docs/cd/E14571_01/bi.1111/e10544/creatingviews.htm#BACCBCBA
If you are stuck on a particular step, then describe the problem in detail.

Formatting pivot tables (obiee 11g)

Hi, I'm trying to find good ways to format pivot table results in 11g. Can someone help answer the following questions? Note that I'm putting the "measures" label into the row position, which allows me to format measures differently from each other.
1. I'd like to put blank rows into the output to space the report. I tried creating a dummy "spacer" measure and then setting display:none in the CSS style. However, this leaves an ugly blank spot that has a gray color in the output. Is there an easier way just to add blank spaces between rows?
2. The default grid lines on all pivot tables are really dark. If you're a Stephen Few afficianado, they really interfere with reading the numbers. Is there a simple way to default pivots to have less obvious grid lines?
3. Is there a way to turn off the "word wrap = TRUE" for everything? I've tried setting default number formats for all items to have word wrap turned off...I don't know who would EVER want minus signs wrapping around in numbers...despite this, any new metric I create ALWAYS seems to have stupid word wrapping turned on. If anything, I'd like the default to be off for all items.
Thank you very much!
Scott

please try the code
#EFF0F4
Regards,
Akansh

Calculated column in a pivot in obiee 10g

Hello all ,
Please share your thoughts on the below requirement :
I have 3 measure columns in a pivot table (in measures)- A,B,C .
against region dimension (in rows) and one month dimension (in measure lable ).
the data's are populating as below :
....... jan .......Feb
A B C ....... A B C
region --- >10 5 5 .........2 5 10
Now , i want one calculated column (D) , just after these three months values of A,B,C .
the calculation would be :
D =((A of Jan * B of Jan) + (A of Feb * B of Feb)) / (C of Jan + C of Feb)
Let me know , if further explanation needed .

Try to use Table view first to get the expected results by tweaking the below post
Re: Second row data - First row data of other column?
Will response if I get any better approach.

How to get Pivot table in 10g ?

Hi,
I have a table with data like this
Exe_Name Deal_name Contract_No
Mark ALF Ent C1001
Sam ALF Ent C1002
Mimie D&B Prod C1003
phoen ALF Ent C1004
Mark ALF Ent C1005
Mark D&B Prod C1006
Roger BlueBus Ent c3005
I have to get an output as follows
Exe Name ALF Ent D&B Prod BlueBus Ent RozHold ....... Pi Ent
Mark 103 4 5 33
Sam 23 15 33 53 24
Mimie 3 44 13 22 1
I work with Both Oracle 9i and 10g .I know that Oracle 11 has Something called PIVOT. I tried with Decode but it was
not feasible since my executives are almost 50 in numbers and dealer vary between 90 to 130
I need to use the query in Forms as well as Reports
Is there any possible way of getting this ?
Thanking you
With Warm Regards
ssr

hi,
This is table structure with data ,
Executive name, Dealer Name and contract Number created by executive for the Dealer
Exe_Name Deal_name Contract_No
Mark ALF Ent C1001
Sam ALF Ent C1002
Mimie D&B Prod C1003
phoen ALF Ent C1004
Mark ALF Ent C1005
Mark D&B Prod C1006
Roger BlueBus Ent c3005
The Following is the required Output
The top Row has the Dealer Name
and First col has the Executive Name . For every Executive we have to list the count of Contracts for each and every Dealer.
Exe Name ALF Ent D&B Prod BlueBus Ent RozHold ....... Pi Ent
Mark 103 4 5 33
Sam 23 15 33 53 24
Mimie 3 44 13 22 1
as i told in my first post, Decode is not exactly working out as there are many dealers .
Can any one pull me out ?
With Warm Regards
ssr

Exclude the value 0 records in the pivot view obiee 10g

HI,
I have a requirement.,i have report circuit and outage time by month in a pivot view.If one circuit have a '0' outage time in all months then i want to exclude the record from the display.Is there anyway to display the data like this....
thanks,
prassu

circuit   April may jun
   1          0   0     10
   2         0     0     0
   3         0     4    1
my question is for circuit 2 all months we have outage 0.so i want to exclude the record , if we select Quarter 2.
And exclude 3 if we select April....etc

Adding a single table without a logical join to another table (OBIEE 10g)

Sometimes I want to just display a single table without a logical join to another table in the repository. However, everytime I move it to the Business Model and Mapping layer and perform a Global Consistency Check, it tells me that it needs a logical join and I am forced to create another table to join to it. Thus creating a dimension-fact relationship. There are times I don't need this relationship and just want to display some data. Is there anyway to get around this?
Thanks in advance!

Yes,You have to create a join.You cannot take single table to BMM layer.You can create an alias of the table.Join this alias and base table through any common column and take both tables to BMM and desired table to presentation layer.
Another way is to create a view in physcial layer.Write a select statement like
Select primary_key from Table
Where primary_key is primary key of base table.Join this view ith base table and repeat the steps defined for Alias.
Regards,
Sandeep

Customization of filter view in obiee 10g

Hi,
I have a report with chart view and filter view.
We have some implicit filters in the report(static filters).
Is it possible to hide the static filers and display only the selected prompt values(explicit filters/dynamic filters) in the filter view.
Thanks in advance.
Sankat.

Hi,
I dont know if this idea works for your requirement.
Try to have a dummy condition validate the static and the dynamic filters in the reports.
For example-
column_name less than 0
and static filters
OR
column_name greater than 1
and dynamic filters
Hope this helped/ answered
Regards
MuRam

Pivot table logic....

Hi All -
I need to create a pivot table on the following data :
Country : List of country names in one column
Cases : Case #'s of the cases which were raised for individual countries
Open Date: Date when the case was raised
Closed Date: Date when a particular case is closed
Query : we need to show the open and closed cases for a particular country on the basis of month...
Row of the pivot should be Country... In the column we need to have the month name and under it we need to have the count of open cases and count of closed cases...
could you please help me out in this?
The following is the view of the pivot table for example:
_____________________ January__________________________February_____________
Country Name______open Cases__Closed Cases_________open Cases____ closed Cases
Thanks!
Edited by: user8021111 on Dec 8, 2011 5:05 PM

user8021111 wrote:
Hi All -
I need to create a pivot table on the following data :
Country : List of country names in one column
Cases : Case #'s of the cases which were raised for individual countries
Open Date: Date when the case was raised
Closed Date: Date when a particular case is closed
Query : we need to show the open and closed cases for a particular country on the basis of month...
Row of the pivot should be Country... In the column we need to have the month name and under it we need to have the count of open cases and count of closed cases...
could you please help me out in this?
The following is the view of the pivot table for example:
_____________________ January__________________________February_____________
Country Name______open Cases__Closed Cases_________open Cases____ closed Cases
Thanks!
Edited by: user8021111 on Dec 8, 2011 5:05 PMDo this:
Assumption: You have a processing date column, I'lll call "Full Date" that is the date column you will use to track the "counts" of open and closed cases. The assumption is that in your database, this date column contains the "end of month" processing date for each month (e.g., 10/31/2011, 11/30/2011, 12/31/2011, etc.)
1) In the Rows section of your pivot table, put the Country column.
2) In Criteria mode, click on the fx button of the "Full Date" column and enter this
MONTH("Full Date")
This will give you the "month." Put this column in the Columns section of your pivot table.
3) In Criteria mode, click on the fx button of the Open Date column and enter COUNT(Open_Date_column). Put this column in the Measures section of your pivot table.
4) Do the same as step 3) for the Closed Date column.
So by putting the MONTH("Full Date") column in your Columns section of the pivot table, OBIEE will break out the Open Date and Closed Date counts by each month. That's how you do it.

Calculated Percentage Columns in Pivot Table loose formating in Excel

I have a simple report built using pivot table ( OBIEE 11.1.1.5.0)
1 Metric and 1 dimension using pivot table. and I duplicated the metric column and change it to % column.(Show data as % of column). SO far so good. Below is the snapshot
http://tinypic.com/r/2s14xa9/7
Now i download the report in excel and all the % values are messed up . Below is how it looks
http://tinypic.com/r/bede90/7
I tried messing with data formats etc..nothing works.. I cannot add a custom column format to the metric column since it will impact the derived % column.
Is this a bug ?Any pointers ..
Thanks

Hi,
Follow up this SR:
SR 3-5060435331: Calculated Percentage Columns in Pivot Table loose formating in Excel
Workaround: (not sure may be give a try)
also give a try like below one then try to download it may work.
In that % column -->add the below statement in the Custom CSS section of the column properties:
mso-number-format:"\@"
Refer snapshot here:
http://i53.tinypic.com/a09kqv.jpg
This will treat the data in the column as text while downloading to excel, hence retaining any leading or trailing spaces.
Thanks
Deva

OBIEE 10g dropping pivot table rows in Compound Layout

I have a report with 8 pivot table views in the compound layout. In one of the pivot table views, two of the rows do not appear when viewing it in the compound layout. It also doesn't show most (but not all) of the metric values in the 4th metric column in the compound layout. However if you edit this view you will see all the rows and all the values. Furthermore, if you remove the second pivot table from the compound layout, the first pivot table displays everything correctly. No other pivot table removal has this effect. There is no obvious reason why two rows should be dropped from the view only in the compound layout. They don't appear to have anything in common but different from all the others. I can also remove the other 6 pivot table views and this all still happens. I've completely rebuilt the report and it still happens.
This is 10.1.3.4.1.
Interestingly, in the environment where this is happening, <ReportAggregateEnabled>false</ReportAggregateEnabled> is set in the instanceconfig.ini. If I move the report (copy the XML) to another environment with this set to TRUE, these problems go away, though it's not terribly clear why. Unfortunately it's not as simple as setting this variable to TRUE because the entire production environment is already running with it set to FALSE and switching this will likely cause other problems.
Any thoughts? Thank you.

All the additive metrics have an explicit SUM on them in the Criteria section. The metrics in the Criteria section that are of the form metric1/metric2 are set to DEFAULT.
In pivot table 1 and 2, the aggregation rule on the metrics are all DEFAULT and report-based totals are checked for all (if I uncheck I get a group-by error).
The two pivot tables are using two different sets of metrics (technically one is using metric1 and the other is using metric1*(-1) to reverse the sign).
I really suspect there is a weird aggregation bug here that the ReportAggregateEnabled setting seems to resolve. I'm hoping to switch that to TRUE in the env. where this is not working and see if it fixes it.
Thanks for the suggestion.

Change the default font in OBIEE 10g

Hi all,
I need to change a few things in the default design of my OBIEE 10g, namely:
Font and Font Size from all views (Tables, Pivot Tables, graphs…)
Alignment of text. Numbers should be aligned to the write and text to the left
I tried to change the font and font size in the view.css file but that’s not working.
Can anyone tell me where/how I can change this?
Thanks in advance

Do change in common.css file
~ http://cool-bi.com

Customize Font in Pivot Table OBIEE 10g

Similar Messages

Maybe you are looking for