Customize the load of the incidents choice menus.

Hi.
Im looking a way for customize the load of the incidents choice menus (Support Group, Impact, Urgency...) immediate (ON CLICK).
Ej1: Select a classification category for the incident and load the support group associated to this category immediate or filter only the support groups associated to the classification category immediate . (ON EVENT CLICK IN
THE CHOICE MENU classification category)
Ej2: Select a support group and filter only the users to asign (Assign to...) from this support group.
What tool i can use?
What is the most easy way?
Thanks.

Ok. The idea is not to use pop-ups. I want to filter only the support group for printers in the "dropdown-combobox" - "Support Group" when i select "printers"classification category for example.
Its possible? Why you say that is hard to develop in #C ? ?
Im reading that you wrote this
i don't want to understate what you're taking on here.
Custom controls are HARD development. this is not the fluffy "configuration" that you get editing XML and doing powershell. These
are the real deal.
you're going to need more then a small amount of C# and .Net knowledge, and you're going to have to know enough of the SDK to pull your "options" class back to populate this list. ISTRONGLY recommend
you get someone familiar with C#, XAML and the SCSM SDK to architect this.
:S AAAAAAAAA!!

Similar Messages

Just purchased the latest ipod nano. Running itunes 11.1.3(8). Why will the music not load? Under devices the 'syn' choice can't be selected and instead only have 'transfer purchases from ipod' What to do?

Just purchased the latest ipod nano. Running itunes 11.1.3(8). Why will the music not load? Under devices the 'sync' choice can't be selected and instead only have 'transfer purchases from ipod' What to do?

Just purchased the latest ipod nano. Running itunes 11.1.3(8). Why will the music not load? Under devices the 'sync' choice can't be selected and instead only have 'transfer purchases from ipod' What to do?

TS3274 When viewing pick lists from different web sites my iPad2 selects the first choice on the list and loads it without allowing me to pick my option; is there a way to change this default?

When viewing pick lists from different web sites my iPad 2 (safari) selects the first choice on the list and loads it without allowing me to pick my option; is there a way to change this default?

With your playhead over the clip in the timeline and that V track's 'track selector' as the only one active...hit the 'f' key.
This will load the original clip into the viewer at the matching point of the frame in the timeline.
K

How to customize the error messages in web analysis reports

Does anyone know how to customize the error messages that web analysis shows ,
I want to customize the below error message with a custom error message
"Document does not exist or no authorization to open document.Error occurred while loading document"
Does anyone know how to do this ?

Rajesh,
you may want to check these links
How to the Change the Application Stopped Message
How to Change the Dispatcher Running, No Server Connected Message
http://help.sap.com/saphelp_nw70/helpdata/en/65/18fc3f9ec4e669e10000000a155106/frameset.htm
Thanks
Bala Duvvuri

Can I turn off the onscreen popup MENUs in safari 6.0.5? (mountain lion

Not popup windows or popup ads. I'm referring to the system popup menus that appear mid-screen when using Safari. The menus appear to be contextual, and will have choices, such as "go back." I have to tap somewhere on the screen to get it to go away. Frankly, I'm not even sure what tackpad gesture I am doing to cause them to pop up. I only want to use the regular tool bar menu and I find the popup menus disruptive and annoying. I have not been able to find a preference that relates to them. Can I get rid of these things? Thanks for your help...
Jen

I tried that, but there are no settings in there regarding the pop up onscreen menus. It seems to happen in other apps, though less frequently than Safari. Maybe it is an OS thing? However, I could not find any applicable preference...

Windows 8, set default application for example adobe reader, customize the start screen

I have two questions, Im going to deploy Windows 8 to our company, but have 2 big issues.
1) I need to customize the start screen, but cant find anywhere in the gpo´s? How can I do this without sysprepping etc (deploying with SCCM2012 SP1)
2) I need to set the default programs for adobe reader, mspaint etc, how can I do this? It doesnt work with the GPP and folder options, anyone have done this?
Thanks in advance

Hi,
Thanks for posting your question in the forum. First of all, if you want to deploy customized Windows 8 Start Screen for domain users, I suggest we could refer to the following similar threads
and article.
Group Policy for Windows 8 Start
http://social.technet.microsoft.com/Forums/en-us/winserver8gen/thread/13a13c25-a1b2-4665-ab67-a2f9bc3b9bba
GPO Management for Windows 8 Start Screen?
http://social.technet.microsoft.com/Forums/en-US/W8ITProPreRel/thread/2d4bdcc6-3733-470e-939f-8b6eb0ef4492/
Windows 8 Start Screen Customization with MDT
http://blogs.technet.com/b/deploymentguys/archive/2012/10/26/start-screen-customization-with-mdt.aspx
Regarding the second question, since you want to set the default programs via Group Policy but it didn’t work. Would you please let me know how did you configure the setting? Please refer to
the following steps to configure the GPO setting.
To create a new Open With preference item
Open the
Group Policy Management Console. Right-click the Group Policy object (GPO) that should contain the new preference item, and then click
Edit.
In the console tree under
User Configuration, expand the Preferences folder, and then expand the
Control Panel Settings folder.
Right-click the
Folder Options node, point to New, and select
Open With.
In the
New Open With Properties dialog box, select an Action for Group Policy to perform.
Enter Open With settings for Group Policy to configure or remove.
Click the
Common tab, configure any options, and then type your comments in the
Description box.
Click
OK. The new preference item appears in the details pane.
For details, please refer to the following article.
Configure an Open With Item
http://technet.microsoft.com/en-us/library/cc732272.aspx
In addition, I suggest we could collect the following information to narrow down the cause of the issue.
GPMC.log
==================
a. On domain controller, click Start ->Run, type GPMC.MSC, it will load the GPMC console.
b. Right click on "Group Policy Result" and choose wizard to generate a report for the problematic computer and user account (please place appropriately). (Choose computer and select
the proper user in the wizard)
c. Right click
the resulting group policy result and click the "Save Report…" => save report to save the report to a HTML file.
Hope this helps.
Best Regards,
Andy Qi
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback
on our support quality, please send your feedback here.
Andy Qi
TechNet Community Support

Any way to customize the headerClick event of an Accordion control

Hi,
Is there any way to control the transition of the accordion
headers. I want a confirm message to appear when a header in an
accordion control is clicked and if the user selects Yes then only
the accordion should open the clicked header portion else the
previous header portion should remain open.
I tried to override the headerClick event and its event
Handler but both are declared as private in the Accordion class
also the event.preventDefault doesnot function. Is there any way to
customize the header click event handling?
I am working on Flex version 2.0.1.
Thanks and Regards,
Paromita

But, as said before, sharing the same session shouldn't give any problems at all. Which problems are you occurring? If you have problems with that they shares the same session, then you are apparently storing values in the session scope while they belongs in the request scope.
Hi,
Thanks a lot for your comment.
But if I change the backing bean to session scope, the same problem exists.
And i need to set the userID to session for future reference.
the scenario is like this,
1. I am loading the JSF application in iFrame of a .NET page and the user can invoke multiple instance of the same .Net page in different browser at a time.
2. After loading the JSF application, the server will establish session with the browser and at that time the same session is sharing by the windows.
3. From the JSF page i am again invoking a popup window for a wizard and this popup window will be in the same session with the parent window. So whe we invoke the popup window from the any other JSF page, it will also share the same session although the userid is different
I have tested and the same session cookies are shared among the pages. So we need someway to manage the creation of session. By writting a servletResponseWrapper and overridding the addCookie method will have any effect?
Or can you please suggest some other alternatives?
Regards,
Sudheesh

How to customize the landing page of Power BI application in a Office 365 Site?

Hi,
While we navigate to the Power BI application by clicking the icon from the Site Contents of a Office 365 site, everything is loaded in it.
But we would like to customize / edit the page, so that all users will see the contents we put in.
We are SCA / having Full Control on the site but we have limited options in the Power BI application.
Please provide pointers on how to Edit / Customize the application.
Thanks,
Thanan.

It looks as of now Power BI application on Office 365 doesn't supports any customization.
Thanks,
Sagar K
(Blog: http://datamazik.blogspot.in/)

I'm trying to do a mail merge but cannot customize the merge target

I'm trying to merge a fields from a Numbers document into a Pages document to create a customized form letter. I have been able to customize the merge field name so that I can create a Company merge field in Inspector Link's merge table, and while I can do that, I cannot customize the target field. Target fields seem to be limited to First Name, Last Name, Address, City, Prov, PC (as they are shown in my Numbers document), even though I do have a column entitled Company. For some reason, when I customize Company as a merge field, what shows up in the target field in the merge link table is "First Name", and there is no option to select anything else from the drop down menu other that what I have noted above.
Help ... please. Desperate!!! And slowly going crazy!!!
Thanks. Using OSX Lion, '09 Pages 4.1 and '09 Numbers 2.1

Hello Peter,
I'm not sure what you mean by "Have you ensured your Numbers table has this exactly (U&lc) in the header?", but this is what I have done.
This is how my column titles look in Numbers, i.e., Company is one column title, First Name is another, etc.:
Company
First Name
Last Name
Address
City
Province
PC
This is how my merge fields look in my Pages document when trying to set up the merge fields:
First Name Last Name
Company
Address
City, Province PC
Here's a screen shot of Inspector Link - Merge looks like:
I cannot for the life of me figure out what the heck I'm doing wrong ... if in fact I am doing something wrong. Oh yes, when I click on the arrows in the target name column, the only choices available in the drop down menu are:
First name
Last Name
Street
City
Province
PC
Company
Now, if you, or anyone else, can figure that out, I'd really appreciate it.

How do I customize the toolbar if I've removed the "view" tab from the toolbar?

I was trying to customize my toolbar while working in excel and accidentally removed all of the tabs along the top toolbar (File, Edit, View, etc). I can't figure out how to put them back as all of the help threads begin with "go to the View tab".

Hi, ryanfromtorrance.
I think I'm understanding what you did.
You will need to start in the Excel menu bar at the very top of your screen. The one with the  in the far left corner. Find the View menu there. It should be three over from the  icon.
Click View > Customize Toolbars and Menus...
When the Customize Toolbars and Menus window opens, click the Toolbars and Menus tab, then make sure the checkbox next to Standard is checked.
That should return the display of your toolbar when you close that customize window.
I hope this is helpful.

Is there a way to customize the toolbar/ruler in TextEdit? i.e. add buttons

I've become so annoyed by various aspects and quirks of MicrosoftWord that I'm trying to wean myself off it and migrate over to TextEdit as a simpler, faster and more stable day-to-day default word processing program.
In TextEdit's "Rich Text" mode, with the ruler/toolbar showing, there are only a few standard drop-down menus and buttons: Styles, Paragraph-align, Spacing and Lists. Is there a way to add new buttons or drop-down menus to this default selection? One of the few nice things about MSWord is that one could customize the toolbar. I'd expecially like to add simpler font-formatting buttons like "Strikethru" and font-sizes to TextEdit. I realize these things can be accessed via the "Fonts" floating window (command-T), but that's a whole extra keystroke and having to reach across the screen.
I presume there isn't a way to add these custom formatting buttons, but I just wanted to make sure.

You might like to try Bean, as a neat and simple WP - I'm a fan.
http://www.bean-osx.com/Bean.html

Can I customize the Spell Checker?

I am new to Pages coming from Office...
In Office, I can customize the Spell Checker to do many things. It will let me have it "auto-correct" any misspellings I commonly make... like if I type "dont" it will automatically change it to "don't".
Does the Mac let you customize the spell checker?

Neighborhood Office wrote:
In Office, I can customize the Spell Checker to do many things. It will let me have it "auto-correct" any misspellings I commonly make... like if I type "dont" it will automatically change it to "don't".
Does the Mac let you customize the spell checker?
Launch Pages.
Go to the Pages menu then:
Preferences > Auto-correction
Check the Symbol and text substitution checkbox, then check any substitutions you want made and uncheck any you don't want Pages to do for you. You can add other errors you commonly make and their corrections using the + button below the list.
Auto - Correction is discussed on page 113 of the Pages '09 User Guide, a pdf document that you can download using the link in Pages's Help menu. Searchable, generally well written, and loaded with excellent information, it's highly recommended for anyone new to Pages.
Regards,
Barry

How to customize the Uncommitted data warning popup message

Hi,
As per this link https://cn.forums.oracle.com/forums/thread.jspa?threadID=2381421 we can customize the session time out warning message by adding the below lines of code.
+<af:document id="d1">+
+<af:resource type="javascript">+
function myload(evt)
+{+
AdfDhtmlLookAndFeel._TRANSLATIONS['af_document.POST_SESSION_TIMEOUT_MSG']='Time is over...';
+}+
+</af:resource>+
+<af:clientListener method="myload" type="load"/>+
+...+
+</af:document>+
For modifying the uncommitted data warning message which resource string is required instead of 'af_document.POST_SESSION_TIMEOUT_MSG'
Thanks,
-Gaurav

Hi,
see the red message in http://docs.oracle.com/cd/E28389_01/apirefs.1111/e12046/oracle/adfinternal/view/js/laf/dhtml/rich/AdfDhtmlLookAndFeel.html ? AdfDhtmlLookAndFeel is an internal implementation class that should not be used in custom code.
Frank

How to customize the cell date format

Trying out the trial version of Numbers....
I would like to customize the cell date format. The inspector gives you several choices for date formats but I would like something different and wish to customize my own - just like in Excel.
I don't see a way to do this. Are we limited to only those date formats provided by Numbers?
Is there some other way to do this?

I found a way to do this, but not in Numbers. Note that it is probably not for those who are squeamish about editing configuration files, and could probably break something if done incorrectly:
1. Right click on the Numbers application icon and choose "Show Package Contents".
2. Type "date" into the spotlight window and click on the DateTimeFormats folder or drill down to Contents/Frameworks/SFUtility.framework/Versions/A/Resources/DateTimeFormats.
3. Right click on en_US.plist or your language's plist file and click Duplicate to make a backup. (Just rename the backup if you damage something).
4. Open en_US.plist or your language's plist file with a property list editor. I use Property List Editor from the Apple Developer Tools, but I think Pref Setter is also easy to use.
5. Open AcceptedDateFormats and check if your desired format is there. If not, add a string key with the desired format.
6. Open DisplayedDateFormats and add a string key in the format you want it displayed.
7. Save the plist file.
8. Restart Numbers.
9. Your desired date format should appear in the list of formatting choices.
If you're opening up plist files and editing them, I'm hoping the date format conventions are familiar. If not, cross reference them to the list of already coded date formats in the date format inspector to get the hang of it.

JSF - Tomcat security...what is the best choice for a high activity site

JSF - Tomcat security...what is the best choice for a high activity site
The JDBCRealm is not multithreaded so what are options for high activity site??
I would like to have Apache as front end doing load balancing, Tomcat as server and JSF.
All ideals and suggestions please.
Thanks
Phil

One more question.
Since Tomcat has this setup.
create table users (
user_name varchar(15) not null primary key,
user_pass varchar(15) not null
create table user_roles (
user_name varchar(15) not null,
role_name varchar(15) not null,
primary key (user_name, role_name)
It seems like a huge pain to keep a user with every role. What happens when you have 500,000 users???
Also, the authentications on every page....would it be easier to login once and setup a session bean check that on with the page header ??
Thanks
Phil

Customize the load of the incidents choice menus.

Similar Messages

Maybe you are looking for