Customized Reports through Stored Procedure

Dear All,
Will the SAP Policy allows in creating the Stored Procedure to design a crystal report
within the SAP Company Database.
Thanks,
Uma

Dear Uma,
Based on official SAP B1 supporting policy, no Stored Procedure is allowed other than SP_TN.
However, Crystal Report will only read database, it should not be a problem in theory. I hope there is an exception to the strict rule.
Thanks,
Gordon

Similar Messages

  • How to generate a report from stored procedure

    I would like to generate a report from stored procedure.
    I used to work on sql server. this can be done as easy as put a select statement at the end of stored procedure.
    The resule can be displayed on the development IDE, like sql developer or consume by Java JDBC client.
    is there equivalent way to do this in Oracle stored procedure?

    Hi,
    What type of report you are looking..for.. ??
    As you said that "I used to work on sql server. this can be done as easy as put a select statement at the end of stored procedure. "
    When you execute it will return the result set and you will display directly on the FrontEnd.. Is my Understanding is correct Up to here.
    See, In oracle you have call some custom stored procedures as you did in SQL Sever, but you have return the Results Sets, with help of Out put paramter, Either Cursors or Varrays..
    or Else you can generate the Html reports based on your requirement, HTML can be used in the stored procedures of Oracle which will generate for your, you need to code it.
    I could not able get the relevant link for your reference.
    I will get back to you on this.
    - Pavan Kumar N

  • Run report in stored procedure

    Could anybody help me to run the report in stored procedure? I
    created a report in the way below:
    start report builder-> build report manually->(object Navigator)-
    program unitcreated a pachage spec and body
    When I go to the live viewer, it asked to create a layout, but
    the it asks a sql statement if I go layout model.
    Is there any way to run this report or I did something wrong?
    Also, how to run a stored procedure from the database, please
    provide as many details as you can since I am new to report.
    Any help will be greatly appeciated

    hello,
    i am not quite sure if i understand you correctly, but in oracle
    reports you do not create a report using PLSQL packages.
    you define a datamodel and then create a layout. the best way is
    if you run through the wizard to create a first version fo the
    report.
    regards,
    the oracle reports team --pw                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Crystal Reports 2008 Stored Procedure and Parameters from LOVs

    Quite simple report using stored procedure as data source. When editing some of the parameters we get this error when clicking OK to close "This stored procedure parameter can only accept multiple values. Please ensure that Allow Multiple Values is true."
    As we all know stored procedure parameters do not access multiple values at all, so this message is very hard to debug. The report does work if we set the 'Allow Multiple Values' to true, but only when using exactly one value for the parameter. We have tried verify database and other things, but cannot find any way around this issue.
    All ideas are appreciated as this is stopping us from utilizing the dynamic parameters.
    Thanks, Stig

    We managed to work around the issue by creating a new stored procedure. First we used the same parameter names and changed the data source to the new stored procedure. After renaming the parameter with the issue the problem then was resolved.
    Note that another parameter that was earlier affected by this issue in the way that it could not be edited and saved due to the same error message now also works fine. This even if this parameter has not changed names.
    Quite a complex situation to debug this. Maybe if the source of the error message is found in the code we could help testing.
    Stig

  • How to retrive data through stored procedure in mysql from remote machine?

    Hello everybody,
    I am having problem in accessing data of mysql through stored procedure. It works fine if I use "jdbc:mysql://localhost:3306/[database name]" instead of "jdbc:mysql://[IP address]:3306/[database name]". The connection is fine for both, but when stored procedure is called the system stops at "stmt.execute();" line in java file while debuging. In case of localhost there is no any problem. The code for connecting procedure is:
    stmt = dbConn.prepareCall("{? = call testing()}"); stmt.registerOutParameter(1, Types.VARCHAR); stmt.execute();
    I have to connect java application running in Windows to the mysql database running in remote machine(RHEL 5).
    I am using "mysql-connector-java-5.1.5-bin.jar", jdk 1.5.0 and remote database Mysql version : 5.0.22.
    There is no exception and application hangs at stmt.execute();
    Can anybody help me with this problem?
    Thank you.

    I got it. its about connection...

  • Sending Long Raw Data to Oracle database through Stored  Procedure

    Hi,
    I am trying to push data to Oracle 9i database through Stored Procedure via thin driver. It is going smoothly upto 29411 bytes. But it is not accepting for 53843 bytes and giving following error :
    java.sql.SQLException: Data size bigger than max size for this type: 53843
    Is it thin driver limitation? Can I solve it by using OCI driver? Or is there any other approach?
    I tried creating connection pool in weblogic 7.0 through OCI driver. But I am not able to configure it. Is there any special way of configuration.
    Quick response will be greatly appreciated.
    Thanks
    Sanjiv

    It happens to me. But I am using CMP of Weblogic 7. If you write your own jdbc code, the following link may be helpful.
    http://otn.oracle.com/sample_code/tech/java/codesnippet/xmldb/HowToLoadLargeXML.html

  • Passing parameters to sub report's stored procedure

    I'm attempting to pass values from the main report to a linked sub report's stored procedure, but I haven't been successful yet.
    I know how to filter the parameters on the return set of the stored procedure, using parameters from the main report. However, I would like the stored procedure executed for each record of the main report, using those values passed.

    I was getting "missing parameter values" trying to send parameters to a stored procedure in the subreport.  Turns out there is a hot fix for my issue.  Not sure if it matches what you're trying to do; you need to give more information on what you've already tried.
    I was using CR XI, and also CR for VS 2005. The problem seems to be fixed with CR VS2005 SP1, for Visual Studio CR.
    Look up under Business Objects Downloads: Crystal Reports > .NET > Hot Fixes
    Files:
    CRRedist2005_x86.msi
    crvs05sp1.exe
    Then open the report again, and re-save it.
    This has fixed the problem for me.
    Good luck!

  • Return a parameter through stored procedures

    Hello Experts
    I want to return parameter through stored procedures so as to ensure that the application has been executed properly.
    My source message format is
    <StatementName5>
    <storedProcedureName action=u201D EXECUTEu201D>
      <table>Summarize_prc</table>
    <empid  [isInput=u201Dtrueu201D] [isOutput=true] type=SQLDatatype>val1</empid>
    </storedProcedureName > 
    </StatementName5>
    Do i need to put some extra parameters for return values from the stored procedures?
    What would be the response message format to return the parameters from stored procedure.
    Thanks
    Sabyasachi

    Hi,
    If you wants to read the return values from stored procedure, the scanario should be designed as Sync.
    The format looks like thsi
    <Message Type Name>
          <STATEMENTNAME_response>
                      <Field1> </Field1>
       </STATEMENTNAME_response>
    </Message Type Name>

  • Problem while running the report from stored procedure

    Hi,
    I using stored procedure to generate my report.
    my stored procedure's code looks like this.
    CREATE OR REPLACE PROCEDURE PROJECTOVERVIEWREPORT1(query in VARCHAR2)
    IS
    myPlist SRW_PARAMLIST;
    myIdent SRW.Job_Ident;
    myStatus SRW.Status_Record;
    BEGIN
    srw.start_Debugging;
    myPlist := SRW_PARAMLIST(SRW_PARAMETER('',''));
    srw.add_parameter(myPlist,'GATEWAY','http://localhost:8888/reports/rwservlet');
    srw.add_parameter(myPlist,'SERVER','rep_kalyan1');
    srw.add_parameter(myPlist,'REPORT','BillFormat.RDF');
    srw.add_parameter(myPlist,'USERID','atl3_dev_jul04/atl3_dev_jul04@mgi');
    srw.add_parameter(myPlist,'destype','file');
    srw.add_parameter(myPlist,'desformat','pdf');
    srw.add_parameter(myPlist,'documentnumber','17181');
    srw.add_parameter(myPlist,'papertype','N');
    srw.add_parameter(myPlist,'desname','c:\temp\17181.pdf');
    myIdent := srw.run_report(myPlist);
    myStatus := srw.report_status(myIdent);
    srw.stop_Debugging;
    EXCEPTION
    WHEN NO_DATA_FOUND THEN
    NULL;
    WHEN OTHERS THEN
    NULL;
    END PROJECTOVERVIEWREPORT1;
    Iam running the oc4j instance and the report server in my local machine.
    when i have typed http://localhost:8888/reports/rwservlet
    Iam able to see the help page.
    My rdf file is placed in OralceHome/reports/integ folder.
    Iam executing my stored procedure it is returning some error.
    Iam doing any thing wrong.
    Do i need to modify anything.
    Is the place of rdf file correct.
    plz help me solving the above problem.
    --Kalyan                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    This is the error message iam getting..
    any idea????
    * WELCOME TO EVENT-BASED-REPORTING API *
    * API-Version : 9i *
    * (C) Oracle Corporation, 2000 *
    * Debugging turned ON *************************************
    *** Length of Paramlist : 1
    OK : Parameter added : GATEWAY=http://localhost:8888/reports/rwservlet
    *** Length of Paramlist : 2
    OK : Parameter added : SERVER=rep_kalyan1
    *** Length of Paramlist : 3
    OK : Parameter added : REPORT=BillFormat.RDF
    *** Length of Paramlist : 4
    OK : Parameter added : USERID=atl3_dev_jul04/atl3_dev_jul04@mgi
    *** Length of Paramlist : 5
    OK : Parameter added : DESTYPE=file
    *** Length of Paramlist : 6
    OK : Parameter added : DESFORMAT=pdf
    *** Length of Paramlist : 7
    OK : Parameter added : DOCUMENTNUMBER=17181
    *** Length of Paramlist : 8
    OK : Parameter added : PAPERTYPE=N
    *** Length of Paramlist : 9
    OK : Parameter added : DESNAME=c:\temp\17181.pdf
    Starting run_report: building url
    *** Building URL (RUN_REPORT)
    OK : URL built : http://localhost:8888/reports/rwservlet?SERVER=rep%5Fkalyan1&REPORT=BillFormat%2ERDF&USERID=atl3%5Fdev%5Fjul04%2Fatl3%5Fdev%5Fjul04%40mgi&DESTYPE=file&DESFORMAT=pdf&DOCUMENTNUMBER=17181&PAPERTYPE=N&DESNAME=c%3A%5Ctemp%5C17181%2Epdf&statu
    *** Submitting HTTP Request
    *** using URL :http://localhost:8888/reports/rwservlet?SERVER=rep%5Fkalyan1&REPORT=BillFormat%2ERDF&USERID=atl3%5Fdev%5Fjul04%2Fatl3%5Fdev%5Fjul04%40mgi&DESTYPE=file&DESFORMAT=pdf&DOCUMENTNUMBER=17181&PAPERTYPE=N&DESNAME=c%3A%5Ctemp%5C17181%2Epdf&statusf
    ERROR : HTTP request failed

  • Error when linking report to stored procedure defined with one input parm

    Error when linking report to stored procedure defined with one input parameter
    The report will work ok, when the parameter is removed from the stpred procedure
    An unhandled win32 exception occurred in crw32.exe[4480]
    Stored Proc (sql server 2005)
    USE [Allegro]
    GO
    /****** Object:  StoredProcedure [dbo].[SP_Test]    Script Date: 07/08/2009 10:42:14 ******/
    SET ANSI_NULLS ON
    GO
    SET QUOTED_IDENTIFIER ON
    GO
    ALTER procedure [dbo].[SP_Test](@valuationmode VARCHAR(55)) as
    Begin
    select
         valuation,
         valuationtime,
         valuationmode
    from valuation
    where valuationmode = @valuationmode;
    End;

    This is an example of a stored procedure that is trying to be linked to a new report as the only datasource.
    If I remove the parameter I can create a report, however this will return all of the results of thw query to the report, rather than the desired results. If I add the parameter on the Crystal Report, the stored procedure then has to return all of the results to Crystal and then perform the filtering of records. By using a parameter in the stored procedure, you should be able to do all of the filtering as part of the query on the databse server, making this more efficient.

  • Why Dynamic Parameter is not working, when i create report using stored procedure ?

    Post Author: Shashi Kant
    CA Forum: General
    Hi all
    Why Dynamic Parameter is not working, when i create report XI using stored procedure ?
    Only i shaw those parameters which i used in my stored procedure, the parameter which i create dynamic using stored procedure
    is not shown to me when i referesh the report for viewing the results.
    I have used the same procedure which i mention below but can not seen the last screen which is shown in this .
    ============================================================================================
    1. Select View > Field Explorer2. Right-click on Parameter Fields and select New from the right-click menu.3. Enter u201CCustomer Nameu201D as the name for your parameter4. Under u201CList of Valuesu201D select u201CDynamicu201D5. Under the Value column, click where is says u201Cclick here to add itemu201D and select Customer Name from the drop-down list. The dialog shown now look like the one shown below in Figure 1. Click OK to return to your report design.
    Dynamic Parameter Setup6. Next, select Report > Select Expert, select the Customer Name field and click OK.7. Using the drop-down list beside select u201CIs Equal Tou201D and using the drop-down list, select your parameter field (it should be the first field). 8. Click OK to return to your report design and see the parameter dialog.The parameter dialog will appear and show you a dynamic list of values that is updated each time your run your report. It couldnu2019t be easier! In our next tutorial, we will be looking at how to use this feature to create cascading parameter fields, where the values are filtered by the preceding selection.
    Dynamic Parameters in Action
    My question is that whether dynamic parameter is working with storedprocedure or not.
    When i added one table and try to fetch records using dyanmic prameters. after that i am not be able to find the dynamic parameter option when i referesh my report.
    One more thing when i try the static parameter for my report, the option i see when i referesh the screen.
    Please reply soon , it's urgent
    Regards
    shashi kant

    Hi Kishore,
    I have tested the issue step by step by following you description, while the first issue works well in my local environment. Based on my research, this can be caused by the lookup expression or it indeed return Male value based on the logic. If you use the
    expression below, it will indeed only return the Male record. So please try to double-check the record in the two datasets and the expression in your environment:
    =lookup(first(Fields!ProgramID.Value,"DataSet1"),Fields!ProgramID.Value,Fields!Gender.Value,"DataSet2")
    As to the second issue, please try to use the following expression:
    =Count(Lookup(fields!ProgramID.value,fields!ProgramID.value,fields!Gender.value,"DataSet2"))
    Besides, if this issue still exist, in order to trouble shoot this issue more efficiently, could you please post both the .rdl  file with all the size properties to us by the following E-mail address?  It is benefit for us to do further analysis.
    E-mail: [email protected]
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Crystal Report and stored procedure calls

    Hi,
    1.   I am trying to access a Stored Procedure through Crystal Reports 2008. I have 3 Parameters in it and now I need the 2 Parameters from the stored Procedure to be given by User and the 3rd Parameter should be passed from the backend code. Please help me with the setps that would help me do this.
    2.I also have another Stored procedure where I have 3 parameters and in addition to that I should provide two other parameters for user to enter. Now the total number of parameters will be 5 Parameters. Can any one let me know how to implement all these parameters.
    3. In another Storedprocedure I have two Parameters which are discrete and multi select and both of them are cascaded. How do I implement those.
    Thanks
    Pradeep

    Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly:
    http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551

  • Error when executing DBMS_ERRLOG through Stored Procedures...

    Hi,
    We have TWO schemas like IDWH_ODS and IDWH_ERR running on Oracle 10g Rel.2.
    The schema IDWH_ERR has direct SELECT privilege on all the base tables in IDWH_ODS schema. (As Pl/sql doesn't support ROLE, we have granted direct SELECT on each of the tables)
    IDWH_ODS schema has tables like ACCOUNT & CUSTOMER, for which I need to create DML Error logging tables in IDWH_ERR schema.
    I have one procedure 'Cr_Errlog_Tabs' in IDWH_ERR schema which gets all tables in IDWH_ODS and creates Error logging table in IDWH_ERR schema using DBMS_ERRLOG package. My problem starts here,
    When I execute the DBMS_ERRLOG package in IDWH_ERR through SQL*Plus LIKE,
    > exec DBMS_ERRLOG.CREATE_ERROR_LOG('idwh_ods.ACCOUNT','ERR$_ACCOUNT','idwh_err');
    it's creating the error log table 'ERR$_ACCOUNT' in IDWH_ERR schema.
    (...the same will be working when execute through Anonymous plsql block)
    BUT, when i execute the DBMS_ERRLOG package with same parameters through the stored Procedure 'Cr_Errlog_Tabs', it throws the following error...
    ORA-01031: insufficient privileges
    Please let me know how the solution at the earliest.

    WHY DO YOU FEEL YOU HAVE TO START A NEW THREAD FOR YOUR PROBLEM!?
    Insufficient priv error when executing DBMS_ERRLOG through PLSQL

  • Error when executing DBMS_ERRLOG pkg through Stored Procedures...

    Hi,
    We have TWO schemas like IDWH_ODS and IDWH_ERR running on Oracle 10g Rel.2.
    The schema IDWH_ERR has direct SELECT privilege on all the base tables in IDWH_ODS schema. (As Pl/sql doesn't support ROLE, we have granted direct SELECT on each of the tables)
    IDWH_ODS schema has tables like ACCOUNT & CUSTOMER, for which I need to create DML Error logging tables in IDWH_ERR schema.
    I have one procedure 'Cr_Errlog_Tabs' in IDWH_ERR schema which gets all tables in IDWH_ODS and creates Error logging table in IDWH_ERR schema using DBMS_ERRLOG package. My problem starts here,
    When I execute the DBMS_ERRLOG package in IDWH_ERR through SQL*Plus LIKE,
    > exec DBMS_ERRLOG.CREATE_ERROR_LOG('idwh_ods.ACCOUNT','ERR$_ACCOUNT','idwh_err');
    it's creating the error log table 'ERR$_ACCOUNT' in IDWH_ERR schema.
    (...the same will be working when execute through Anonymous plsql block)
    BUT, when i execute the DBMS_ERRLOG package with same parameters through the stored Procedure 'Cr_Errlog_Tabs',
    it throws the following error...
    ORA-01031: insufficient privileges
    Please let me know the solution at the earliest.
    Thanks.
    -Saravanan

    duplicate post
    Insufficient privilege error when executing DBMS_ERRLOG through PLSQL

  • Crystal Reports - Using Stored Procedure with c#

    Post Author: cathalmckenna
    CA Forum: Data Connectivity and SQL
    Hey
    I've got some c# code that sets a reports data source.
    Its works when connecting to a data source that is a Table, however when the datasource is a Stored Procedure the following error is generated.
    The table 'PNL_STATUS_REPORT' could not be found.Error in File C:\DOCUME1\mckennac\LOCALS1\Temp\temp_9b3cb2f4-7e37-4e34-bd18-af7b06c85139 {ACBDC2D4-A275-4CAA-B3C0-E3C92F615007}.rpt:The table could not be found.
    The problem is when setting table.Location. I've tried prefixing this with the package name that the stored proc is in, but no luck. If I set the table Location to the package name, I get no error, but the report returns no results.
    Any ideas why this doesnt work, is there a different way to handle stored procs??
                 ConnectionInfo connInfo = new ConnectionInfo();            connInfo.DatabaseName = dbName;            connInfo.ServerName = serverName;            connInfo.UserID = userName;            connInfo.Password = password;                        foreach (Table table in report.Database.Tables)            {                TableLogOnInfo logOnInfo = table.LogOnInfo;                string&#91;&#93; locations = table.Location.Split('.');                string unqualifiedLocation = locations&#91;locations.Length - 1&#93;;                logOnInfo.ConnectionInfo = connInfo;                table.ApplyLogOnInfo(logOnInfo);                table.Location = unqualifiedLocation;            }
    thanks
    Cathal

    Post Author: ianbennett
    CA Forum: Data Connectivity and SQL
    I too am having the same problem.  I have found that when the user has a fast connection it works OK but when they use a "slow" link it does not seem to passs the logon information through before trying to generate the report.

Maybe you are looking for