Customizing GUI for B2C in E-Commerce 5.0

I was wondering if anybody knew of any documentation about customizing the GUI of E-Commerce 5.0 B2C. I found documentation that has that in the title, yet it contains information about the older Internet Sales (ISA) and its Frame Sets and not the current use of divs. If anyone has any documentation it would be much appreciated!
thanks,
Paul Zippel

Seeing the document good. But, a little reading of the document is better and that will help too - ha ha.
Pages 53-67 specifically talk about the UI design and the UI examples are listed in the "Examples and Tutorials"
For details see:
<li> Chapter Extensions Limited to the UI Layer in the Development and Extension Guide: EComemrce
5.0 Examples and Tutorials (see [1] in chapter References on page 3) with examples for extension.
Well if you want a primer on [UI Design with Tiles and Struts|http://www.javaworld.com/javaworld/jw-01-2002/jw-0104-tilestrut.html], then check the link.
Cheers,
Easwar Ram
http://www.parxlns.com

Similar Messages

Customer GUI for PR

Dear Gurus,
I need to add a field char 10 for interface doc no in EBAN and also need to display this field to the PR screen.
This is because the need to distinguish this PR is used from the interface system
Is there any ways I can used other that adding fields to EBAN and customised the PR screen?
Also I need to adopt this field to PO when they create it?
Please advise.

HI,
Check for exit which will be called just before 'SAVE' & in that exit writet logic to check whether Cusomar data is filled or nor & POP UP a message saying 'Fill Customar Dtaa Forst & then Save'.

Can we design a custom GUI for Displaying KM docs

Hi all,
The task is to secure the documents published in KM and accessible (read&write)to a limited group,the proposal is to display the docs in a new GUI which lacks options like, "save as , print,copy,paste," and i should also be able to disable certain Keyboard strokes like "printscreen,ctrl+C" etc.
Request you all to tell me the possiblity of such GUI design else kindly suggest me any other alternative like role based splitting....etc...
Many thanks in advance
SantoshKumar Adapa

Hi Santosh,
you may fulfill your requirement from these links
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/504e31fc-f46f-2910-98b4-dd94478c22f8]
see the link "customization Change the layout, context menus as per your choice!" from the below link
[https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/u/251732004]
hope this helps you
vv

Custom workflow for manual merch projects

Hi,
Having issues in configuring custom workflow.
In ATG10.0.3 created a custom workflow(editCommerceAssets.wdl) & configured with catalog import job (importing thru spreadsheet & creating a Merch project).This works successfully.
I am trying to configure this custom workflow for manually created projects in BCC.
In the following files I tried replacing commonWorkflow.wdl to editCommerceAssets.wdl.
<localconfig>\atg\commerce\web\assetmanager\taskConfiguration.xml
<localconfig>\atg\commerce\web\workflowActivities.xml
But getting this error in pub console:
10:13:23,195 WARN [ActivityManager] The workflow activity with ID /Common/commonWorkflow.wdl has been registered multiple times for the same workflow. Please verify your workflow
configuration as this is not allowed.
10:14:40,453 ERROR [ApplicationManager] There is no application configured with ID '/Common/commonWorkflow.wdl'.
Any recommendations?
Thanks!
Mani
Edited by: user11263665 on Oct 17, 2012 9:38 AM

It is possible that the workflow has already been registered in db before you modified workflowActivities.xml.Did you try cleaning up workflow tables and restart the server??
epub_workflow_info, epub_coll_workflow, epub_ind_wf,epub_wf_server_id tables
Make sure there is only one entry for each workflow in epub_workflow_info. If there are multiple entries, then it may be coming from 2 different places and you need to disable one of them. Whenever you create custom work flow, copy the existing workflow and modify it and give it a different name. If you are importing programmatically, you really dont need to configure it in taskConfiguraiton.xml ( as it corresponds to settings related to which item-descriptors, tabs, security in BCC gui).
-karthik

Creation of custom Transaction for confirm goods in SRM

Hi Experts
i need to create a custom transaction same as standard one for confirm goods/servics in SRM portal.
In sap GUI, the transaction is BBPCF03
Can you please suggest any good sources where i can learn to Custome Tcodes for my requirement
Thanks in advance
Edited by: kittu reddy on Nov 19, 2008 7:27 AM

Hi Hussaini,
Here are the steps.
1> Customization needs to be completed in SPRO. Logistics Execution -> Mobile Data entry section. Also compare entries with LM01 for understanding.
2> In the 'Define menu management', you can create dynamic menus. For Menu or transaction type, if you enter "1", a menu appears; if you enter "2", a transaction appears. Custom transactions can be created and assigned here.
Once that is done, when you execute LM01 you will see your custom transactions come up. Make sure that these are created keeping in mind the RF device screen size and limitations.
Regards,
Anand.

Some comments on Adobe 'Custom Panels for XMP File Info' document

In developing a couple of Photoshop/Bridge custom metadata panels for cataloguing my photo collection, I noticed one or two things that look like possible errors in the above document. These comments relate to the version of the document dated April 2005.
P10, description of 'cat_container_edit_text' widget type: surely this should also list custom variable 'container_type', which is needed to specify whether the metadata array is a bag, seq or whatever.
P25, details of 'cat_container_edit_text': same comment applies.
P8 et seq: the requirements for use of the 'name' variable appear contradictory. The summary descriptions of various widgets such as 'edit_text' contain the statement that 'You must provide name, xmp_namespace and xmp_path values for this widget to supply a dynamic
value', but the description of 'name' on P16 says that it 'Applies only to fixed-text widgets. Do not use this variable to change the value or text of the widget at run time.'
Regards
Adrian

Joe, here is the Adobe link that I could not find yesterday when I put up the link to the (suspect) archive site:
http://partners.adobe.com/public/developer/xmp/sdk/topic_cust_file_info_panels.html
I have not looked into these panels for years and I am not sure what has changed in CS4.
Yes, the free software mentioned previously was limited in the amount of fields, however correct me if I am wrong - the output was just XMP text data and one could simply open it in a text editor and copy/paste/edit extra fields and resave, as the limitation was with the GUI frontend and not with XMP.
Obviously the computer reading the file needs the custom info panel installed to see the panel in it's full glory, otherwise the metadata is "hidden" away in one of the other metadata listings (I can't remember where). I also had problems picking up the custom metadata when searching via catalogue applications that could read other common metadata such as IPTC.
It was a bit of a mixed bag if I recall, showing promise however it was not really ready for the average user to use.
Anyway, it sounds as if my very limited knowlege on this area is being exhausted...
While on the topic, some other links that may help:
http://www.idealliance.org/industry_resources/branding_media_and_color/digital_image_submi ssion_criteria/metadata_fields
http://www.idealliance.org/industry_resources/branding_media_and_color/digital_image_submi ssion_criteria/resource_center/xmp_custom_panel
http://www.disc-info.org/resources/xmp.zip (perhaps you look at the source code for ideas)
http://www.iptc.org/IPTC4XMP/
http://www.controlledvocabulary.com/forum.html
http://www.controlledvocabulary.com/imagedatabases/mtworkaround.html
http://metadatamanifesto.blogspot.com/
iView Media Pro software also had a custom panel for Photoshop that may also give you ideas.
Regards,
Stephen Marsh

Report painter report in portal - Excel output in SAP GUI for HTML

Dear sirs,
I need your expertize. I would like to let my users display (Excel in place)/ save the result of my report painter reports into MS Excel. I have found notes 499262 a 314568, but didn´t understand the message (or there is no message:)). Does that mean I cannot use Excel in place together with Report painter and SAP GUI for HTML?
Second question: is there a place (user exit in generated code? I don´t even know what I am looking for) to get the data provided by the report painter engine and send the retrieved data to some custom function (to be able to call the Adobe form, to save it as a text file or any option how to manipulate the resulting data...?).
thank you for your time and effort,
regards Otto

Hi Otto,
You can send print the report to the spool and then use RSTXPDFT4 program to convert this spool to PDF file. Alternatively, you can export the spool to spreadsheet or ASCII file via SP01 transaction.
Additinally, I'm not aware of unability to use Excel output with SAP GUI interface.
Regards,
Eli

B2C ISA / E-Commerce 5.0 - Display the Productmenu recursively / hierarchic

Hello. Is there any possibility or parameter, that the Productmenu will alway display the parentcategories, when someone clicks on a subcategory. Currently it looks like that:
Products
- parent1
- parent2
- parent3
when a user clicks on parent1 the menu changes:
Products
- parent1
- - child1
- - child2
- - child3
- - child4
But it should look like that:
Products
- parent1
- - child1
- - child2
- - child3
- - child4
- parent2
- parent3
Anyone knows a solution? That would be great!

Hello Thomas,
We did something very simlar to this. We actually had the requirement to expand all the parents to start with.
See this thread for hints.
Re: B2C ISA / E-Commerce: Displaying products from subcategories
Easwar Ram
http://www.parxlns.com

Change standard SAP GUI for HTML theme to portal theme

Dear Experts,
I have created transaction code for SAP GUI HTML for a custom report program developed in SE38.
We have created a URL iView in Websphere enterprise portal. The Transaction executing well and there are no issues.
But the SAP GUI HTML uses SAP Standard theme. I wanted to change the input field background color which is similar to our portal theme.
Please let me know , how to change the theme of the standard SAP GUI for HTML.
Thanks in advance.
any solution will be greatly appreciated.
Best regards,
Prabhu

Hi Sushil,
Could you please elaborate in detail with steps.
Thanks for your help .. Greatly appreciated...
Best regards,
Prabhu

Custom panels for File Info.

Hi, everydoby.
This is my first post to this group and I wanted to say hello to everybody. Hello !!!
While doing some reading on Adobe's site I came across an application named Configurator 1.0. This application allows users to develop custom panels for Photoshop and it seems to design custom menus for the interface. I am interested in finding out if it can be used to design custom File Info panels for Photoshop. In case it can't is there another application that can do it and has a GUI that makes it easy to use and simple for someone with little programming experience ?
Thank you,
Joe

Hello, Michael.
I think you are right.
I've looked at the Adobe's website for information on how to build these panels and it seems far more complicated then it should be. Unfortunately Adobe doesn't seem to get that most users are NOT programmers. The information is complex and extensive, far more than it should be for someone who just wants to add a little amount of customization to his/her applications.
My idea was to find a simple GUI application that would allow the average user (myself) to create custom panels for the File Info menu option but one such application doesn't seem to be available. The options are to either immerse myself in the time-consuming, technically-demanding documentation available in the company's website or give up the project entirely.
Thanks again for your help.
Joe Caldwell.

Problem in creating include program for customer exit for BC425_01

Hi,
I want to write a customer exit for transaction BC425_01. For identifying the include program for exit , i go to System->Status.There I double click on the program name(GUI).Then I perform a 'FIND' in main program for 'customer-function' keyword. I get 3 search results with "CALL CUSTOMER-FUNCTION '001' " , "CALL CUSTOMER-FUNCTION '002' " , "CALL CUSTOMER-FUNCTION '003' ".
Now i double click on CALL CUSTOMER-FUNCTION '001' and i am taken to the code of program where this function is called in MODULE cust_check INPUT. I double click on CALL CUSTOMER-FUNCTION '001' and then I am taken to the function module code which contains a single statement 'INCLUDE ZXBC425G01U01 .' .
Now I double click on this include program so that I can write my own code. But when i double click on it , a message displayed 'Program names ZX.. are reserved for includes of exit function groups'. Hence I am not able to creates this include program and write my coding.
Kindly Help
THANKS

Hi Amber,
Then you click enter button.It is asking to create object with that include name ZXBC425G01U01 in a pop-up.You should select YES option.It will ask package . Give the package name and save.Then include program is created and allowed you to write your own code.
Thanks,
Prasad GVK.

SAP GUI for Windows

I am trying to have SAP UWL Tasks open in the SAP GUI for Windows instead of the SAP GUI for HTML. I have created new folders "Customization"->"Universal Worklist" and created delta linked copies of all the iViews found in "Portal Users"->"Standard Portal Users"->"Universal Worklist".
Then I went to the System Administration->System Configuration->Universal Worklist & Workflow-> Universal Worklist-Administration->Optional Universal Worklist Service Configuration and changed the "Path to the UWL iViews to the pcd location of the new folder (portal_content/com.myl.custom/com.myl.uwl).
Then I opened the UWL - Launch SAP Transaction iView (my delta linked copy) and changed the SAP GUI Type to "SAP GUI for Windows".
I thought this was all I needed to do but when I open an SAP task from the UWL it opens the same as it did before - I see no difference at all. Any help is appriciated and rewarded.
Edited by: TA on Oct 1, 2008 6:03 PM
I just noticed that the XML content for the configuration has the SAPIACLauncher as the handler instead of the SAPTransactionLauncher...
So Now I have created a new configuration with each transaction is set similar to this:
<ItemType name="uwl.task.webflow.TS20000194.RS4" connector="WebFlowConnector" defaultView="webflowView" defaultAction="launchSAPAction" executionMode="pessimistic">
      <ItemTypeCriteria systemId="RS4" externalType="TS20000194" connector="WebFlowConnector"/>
      <Actions>
        <Action name="launchSAPAction" userDecision="no" handler="SAPTransactionLauncher">
          <Properties>
          <Property name="GuiType" value="WinGUI"/>
          </Properties>
          <Descriptions default=""/>
        </Action>
      </Actions>
    </ItemType>
However - when I open an SAP task from the UWL it opens the same as it did before - I see no difference at all. Any help is appriciated and rewarded.

TA,
try to clear cache under
System Administration->System Configuration->Universal Worklist & Workflow-> Universal Worklist-Administration->Cache Administration Page
Thanks
Bala Duvvuri

SAP GUI for windows and HTML

Hello,
We have problem running a custom program, when it was integrated as Transactional iView with SAP GUI Type as SAP GUI for HTML.
But, the same program is running fine with SAP GUI Type as SAP GUI for Windows.
Is there any possibility to make some modifications to properties and make the SAP GUI for HTML working.
Thank you.

Hi,
We have a custom ABAP program, where we we can upload data through an excel file.
The xls file can be uploaded from local drive.
So, we have created a Transactional iView with SAP GUI Type as SAP GUI for HTML.
When we try to run the program with an excel file, we are receiving an error message - "Empty input file or input file not found"
Then we have created a Transactional iView with SAP GUI Type as SAP GUI for windows and was successful in uploading the xls file.
Just want to understand, if there is any possibility to make some modifications to properties and make the SAP GUI for HTML working.
Thanks in Advance.

ALV GRID and Integrated ITS 7 (SAP GUI for HTML) - dissapears on reload

Hi All,
We have a custom report that uses an ALV grid to display information to the user. Within this grid, there are fields that are display only and fields that are editable. Also, the grid is wider than the screen's width. It works fine in ECC. It also worked fine when we were using ITS 6.4.
We have recently upgraded to ITS 7. Now when we run the report using a Transaction iView (in EP 7) or the Webgui service (SAP GUI for HTML), if a field that is editable has focus when an event is triggered that reloads the grid, the screen becomes blank. So, you can click the Save button and the screen goes blank, also, there are date fields in the grid and if you choose a new date, the grid reloads and the screen becomes blank.
We have found that when the screen is blank, you can use the "Page Up" button on your keyboard and the last few columns of the grid will appear. As if the entire grid has moved off-screen to the left.
If you click onto a non-editable field and refresh or save, the grid returns to its normal state.
We are on Basis Patch level 15.
Does anyone have any ideas on how to fix this?
Also, does anyone know of a standard SAP transaction we can call from the Webgui that would have a similar setup...with an ALV grid containing editable and non-editable fields? We would like to rule out any errors in the report itself. Since it worked before we upgraded and it works fine in ECC. This would be a really big help too.
Thank you so much!
-Kevin

Hi,
Thanks Raymond, I have seen Note 314568. I could not get the second link to work but I have looked at just about every Note in reference to Integrated ITS 7 and Tables or ALV Grids and there are very many, so it would appear that SAP has had a hard time with implementing this control, but I have not seen any instance that matches the problem we are having.
Unfortunately, SAP will not investigate this unless we can provide a standard Transaction that exhibits the same behavior.
If anyone knows of a standard SAP Transaction that displays an ALV Grid that is wider than the screen (requiring a horizontal scroll bar) and with editable and non-editable fields, that would be fantastic. If we can test against that, then we would know for sure if this is a problem with ITS / SAP GUI for HTML, or if there is an issue with this specific report.
Thanks!
-Kevin

Customer gui components needed?

I require to build a program with which allows the user to add representations of objects onto the main GUI by adding a seperate square for each object. each square should be capable of being moved, resized, deleted as well as have text displayed in it, and another object associated with it (but I'm currently just dealing with the GUI side of things). Each square will also need to be connected to others by means of an arrow from one square to another. Any suggestions as to where to start as there does not seem to be any appropriate widgets provided by java for this and I am having trouble finding stuff on the net about it. Will creating my own custom GUI components be the best option? If so any tips on how to do this?
Regards

Hello Ravi,
Create a Variable for 0CALMONTH, and use this code,
' Declare this in the top
data : v_startmon(6) type n,
v_endmon(6) type n,
' Include this in the case statement
when 'VarName'.
' Step 2 will execute after the user Input
if i_step = 2.
v_year = sy-datum(4).
v_mon = sy-datum+4(2) - 1.
' If the month is Jan
IF v_mon = '00'.
CONCATENATE v_year '01' INTO v_startmon.
CONCATENATE v_year '01' INTO v_endmon.
ELSE.
CONCATENATE v_year '01' INTO v_startmon.
CONCATENATE v_year v_mon INTO v_endmon.
EndIF.
clear l_s_range.
l_s_range-low = v_startmon.
l_s_range-high = v_endmon.
l_s_range-sign = 'I'.
l_s_range-opt = 'BT'.
append l_s_range to e_t_range.
Endif.
Please see this for
[User Exits in SAP BW|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/23f2f094-0501-0010-b29b-c5605dbdaa45]
[User Exit Examples|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6378ef94-0501-0010-19a5-972687ddc9ef]
Also see this
[Dependencies for Variables of Type Customer Exit |http://help.sap.com/saphelp_nw04/helpdata/en/1d/ca10d858c2e949ba4a152c44f8128a/content.htm]
Thanks
Chandran
Edited by: Chandran Ganesan on Mar 17, 2008 1:57 PM

Customizing GUI for B2C in E-Commerce 5.0

Similar Messages

Maybe you are looking for