Customizing 'My Workflow Assignments' page

Hi All,
Is there an easy way to add/remove columns from the ‘My Workflow Assignments’ page?
The requirement is to customize this page similarly to the search results templates.
Thanks,
Tal.

You'll need a custom component for that. If you need to allow end users to change which columns, it will take a bunch of work to create the interface, the mechanism to store the columns (I'd recommend using the user topics/personalization capabilities), and the code to finally make it display the right columns. If you just want to set it to be the same for all users you can start by looking at the workflow_in_queue_table include and modifying the appropriate resources that it references when it builds the display in your own custom component.
If you don't want to create your own component, we have this capability in our Workflow Solution Set product. As an administrator, all you have to do is drag around the columns you want to display in our custom interface. You can find more information about the rest of Workflow Solution Set on our website. [http://www.fishbowlsolutions.com/StellentSolutions/StellentComponents/WorkflowSolutionSet/fs_workflowsolset_webcopy?WT.mc_id=L_Oracle_Software_tjo|http://www.fishbowlsolutions.com/StellentSolutions/StellentComponents/WorkflowSolutionSet/fs_workflowsolset_webcopy?WT.mc_id=L_Oracle_Software_tjo]
Hope that helps,
Tim

Similar Messages

How to create publishing custom approval workflow will assign approvers.

Hi All,
I am new in sharepoint development.
I have a page library where we add artical page with different department
I want to create publishing custom approval workflow will assign approvers based on what department is selected for display. The departments pull from the Other list. On that list each department is assigned an approval group. That approval
group is what should be used for approving the item.
need send to mail with based on selected department approval group
thanks in advance.

Ok, what you're asking for is something that people do all the time, but you say you are new to sharepoint development... So...
Here's how you would do it in SPD:
http://blog.symprogress.com/2011/03/sharepoint-2010-dynamic-approvers-for-oob-approval-workflow/
and here's how you can do it in visual studio:
http://www.mpspartners.com/2011/10/SharePoint2010ApprovalWorkflowDynamicApprovers/
Either way should work, it just depends on your comfort level inside the dev environment.
ieDaddy
Blog: http://iedaddy.com
Twit: @iedaddy

Assigning List Fields in a Custom Reusable Workflow

I am creating a custom Reusable Workflow and associating it with a Task List (base list) as well as another assigned Task List (associated).
I would like to assign the result of the "Assigned To" column to a "Workflow Variable" so that I can use this value for other Workflow operations as well.
However, I am having a hard time understanding how to perform lookups and assignments from lists in a Reusable Workflow. In List-based workflows, I know that I can simply use "Current Item" and that seems to address most needs, but I have
no idea how to tackle this functionality in an SharePoint 2013 Reusable Workflow.
I have attached a screenshot of value assignment from SharePoint Designer for your review. The result of this value assignment needs to be assigned to a workflow variable.
In my test workflow, the assignment of the field from the list never occurs (it is not logged in my Workflow History List), so I am sure something is wrong with the way I am using it.
Any direction and advice on how to accomplish this is greatly appreciated.
Thanks.

Hi,
According to your post, my understanding is that you wanted to know how to use the lookup and assignment from the reusable workflow.
We could not get the “Assigned To” column in the reusable workflow.
As when we select the current item or current list, there is no “Assigned to” column in the reusable workflow.
We can only get the value when the user assigned by the workflow not assigned by the UI.
If you wanted to get the “Assigned To”, you can use the list workflow to achieve it.
I created a simple reusable workflow using a “Assign a task” action, we can get the assigned user as the below lookup, you can have a look at it.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Jason Guo
TechNet Community Support

Workflow Status page - web part unable to load

Has anyone seen "the web part was unable to load" in the workflow status page? Only some users are seeing this error but it's not consistent. What we noticed is that this error occurs only after transitioning from our Select to Manage Phase in
our workflow. The same user that received the error could see the Workflow Status PDP correctly in the previous phases and stages too... So the issue doesn't appear to be permissions related. Anyone have any ideas?

Hi,
Try to update web from following after migration you need to perform below for web part
$Web = get-SPWeb $Web.AllProperties | Format-Table
$Web.AllProperties[“PWAURL”]=””
$Web.Update()
$Web = get-SPWeb
$Web.AllProperties | Format-Table
$Web.AllProperties[“PWAURL”]=””
$Web.Update()
also from you last reply i understood that after removing custom field which are having graphical indicator and look up PDP is working as expected. It means look up and graphical indicator is creating issues.
For Custom field which are having look up field if no value will be selected then it may give error its a expected behavior. It means you need to fill values in those custom field else you will face issue.
For Graphical Indicator issue: Go through below links
http://social.microsoft.com/Forums/en-US/6cdfc2bf-1df7-4b26-a60f-220364093bda/pdp-webpart-and-graphical-indicators?forum=project2010custprog
http://social.technet.microsoft.com/Forums/projectserver/en-US/75b8f6af-0060-4870-a50d-45d44b58cf5f/indicators-on-pwa-not-displaying-project-server-2010-dec-cu
Hope it will help. Please let me know the out come.
kirtesh

Custom Datalink and Assignments

Hello,
I have my own implementation off a DataLink connecting to a database.
But I am also using assigments can I also use my own datalink for assignments, and how do I do that. I need something with a URI
Thanks,
Jelle

The porting-guide in SDK CS4 has a table on InDesign URI, page 13. I'm no expert on custom links, but Assignments are a collection of exported items to InCopy, which results in an XML file + a folder with the individually stored exported stories / images. So if you want your link in the assignment you must also provide an interpretation in InCopy - at least.
Reading Programming Guide SDK CS3, it states on page 749: "An assignment consists of a number of assigned stories, each either a text story (kAssignedStoryBoss) or an image story (kAssignedImageBoss)", which does indicates that it is not possible to add your CustomLinks to Assignments. But page 754 indicate that it might be possible, as it relies heavily on DataLink facilities. I think, you should talk to Adobe about this.

UCCE CAD Workflow Assignments

I'm looking for a good method for auditing UCCE CAD workflow assignments. Currently, I have to open up the CAD Desktop Administrator and view every single agent to verify that they are assigned to the correct workflow group. Has anyone come up with a method for exporting this from CAD?

Yes, it's a problem when you have lots of agents you need to check. At one customer we have over 600 agents configured with 20 or so workflows (one per country) and it's a real pain to check.
I use the free LDAP browser from Jarek Gawor (version 2.8.2) and make an anonymous connection to the CAD LDAP like so:
Then export the appropriate part as a text file. Examine the text file with a decent editor or "grep" and check your assignments. Easy peasy.
Regards,
Geoff

How to set up Application specific custom ogoff (sign-off) page.

Hi,
I'm using OracleAS 10.1.2.2
Note 333638.1 shows us how do make a custom SSO login page to be application specific. This works.
Now, I want to do a custom SSO logout (sign-out) page. Using the redirect method described does not seem to work. Please note that in our version 10.1.2.2, there is no default logout.jsp page in the /sso/jsp directory. To deploy a custom logout page, I would need to update the WWSS_LS_CONFIGURATION_INFO$ view.
I was able to test a custom SSO logout.jsp page sucessfully. However, when I tried using a redirect_logout.jsp to make it application, it no longer works.
Does anyone know or have any idea on how to deploy an application specific logout page? (i.e. only specific applications uses the custom logout page, otherwise go to the default one).
Thanks.
- Kevin

Well,
There are 5 choices to choose from on the page. In the description of the choices at the bottom of the page there are 7, and the two additional choices talk about having to first have registered the site with SSO. So...I'm interpreting that as meaning that other 2 possible choices would be displayed if the site is registered with SSO. That, plus the fact that the page which describes how to add the site to SSO seems to think that the SSO choices are displayed in the wizard.
So, no, there's no "exact launguage" that says what the reason is for the choices not being displayed. Can you point me to some exact language that tells me how to get those choices displayed?

Creating Custom Bullets & Lists in Pages 5.0

I cannot figure out how to create a custom numbered list in Pages 5.0. I had custom LISTS on my 4.3 Docs that did not migrate to 5.0. How do I create duplicate LIST STYLE in 5.0?
Thank you for your help.

On the format menu on the right side, there is the font section, alignment section, spacing section, and bullets & lists section. Next to the bullets & lists section is a drop-down menu of preset lists. At the top-right of this menu is a plus sign. Clicking on this will allow you to create a new list in that menu and title it. From there, you will have to manually create your custom list change the type of bullets (numbers, roman numerals, letters, etc.) -- you might need to click on the disclosure triangle to the left of the bullets & lists title to see this part. When you finish with your custom list, there will be an asterik next to the title of the list, and if you click on that title, the drop-down menu will open up again and you can hit "Update" next to your list name. This should save the style for that custom list. Here is the most important part: When you have finished making this list, make sure you save the document as a template and select that template if you ever want to use that list. I have found that a custom list in a document (saved or deleted) that is not made into a template does not carry over into other documents. Setting up this custom list may take a while, but hopefully it will work and make things easier. I hope this makes sense, and let me know if you cannot understand something. Hopefully this picture will help too.

Fbl5n: The printer provides me only one customer items for each page...

Hi all,
launching t.code FBL5N, and printing the repost list, the printer provides me only one customer items for each page...
I'd like obtaining more customer items for each page...
What to do?
Thanks

Hi Umberto..
Thats how the standard report works..
To meet your requirement, you would probably need to look at another standard report.
In case you need further clarification, please feel free to write to me..
Good Luck!
Lucid-Mind...

Fbl5n report showing pritn output for a new customer on a new page

Hello All,
In fbl5n when i execute for all the customers and give print command its printing every new customer on a new page but i want to print the data continously.
Pls let me knw how to avoid this?
Sunny

Hi Sunny,
you're case is quite common, because SAP displays the customer data in a standard layout, putting a page break after every customer and company code.
In order to avoid this, you may change the grouping criteria. For that,
1. be sure that you have not clicked on the header of any column in the list
2. click on button "sort ascending"
3. here you'll see that fields "company code" and "account" have an asterisk on column NG (new group). This means that, for every change in these fields, SAP will insert a page break
4. remove these asterisks
5. (optional) save this layout for further launchings of the report
I hope this helps. Best regards,
Alvaro

How can I get my custom PS workflows to run correctly when I Retry them after a failure?

I have some custom PowerShell workflows in place that monitor for status changes to various work items and add Action Log entries as required. As an example one of these workflows monitors for newly created Service Requests and creates an Action Log entry
of the type "Record Opened" (script below).
param ( [string]$SRIDInput )
function Using-Culture
[CmdletBinding()]
Param([Parameter(Mandatory = $true, HelpMessage = 'The culture (language) to run the script in.')]
[ValidateNotNull()]
[System.Globalization.CultureInfo]
$Culture,
[Parameter(Mandatory = $true, HelpMessage = 'The scriptblock or wrapped script to run.')]
[ValidateNotNull()]
[ScriptBlock]
$Script
$OldCulture = [System.Threading.Thread]::CurrentThread.CurrentCulture
$OldUICulture = [System.Threading.Thread]::CurrentThread.CurrentUICulture
try
[System.Threading.Thread]::CurrentThread.CurrentCulture = $culture
[System.Threading.Thread]::CurrentThread.CurrentUICulture = $culture
Invoke-Command $script
finally
[System.Threading.Thread]::CurrentThread.CurrentCulture = $OldCulture
[System.Threading.Thread]::CurrentThread.CurrentUICulture = $OldUICulture
try {
if (!(Get-Module SMlets)){Import-Module smlets -Force -ErrorAction Stop}
$Server = "#######"
$EnteredDate = (Get-Date).ToUniversalTime()
$NewGUID = ([guid]::NewGuid()).ToString()
$ServiceRequest = Get-SCSMObject -Class (Get-SCSMClass -Name System.WorkItem.ServiceRequest$ -ComputerName $Server -ErrorAction Stop) -Filter "DisplayName -like '*$SRIDInput*'" -ComputerName $Server -ErrorAction Stop
$SRTitle = $ServiceRequest.Title
$Projection = @{__CLASS = "System.WorkItem.ServiceRequest";
__SEED = $ServiceRequest;
ActionLog = @{__CLASS = "System.WorkItem.TroubleTicket.ActionLog";
__OBJECT = @{Id = $NewGUID; EnteredBy = "Workflow"; EnteredDate = $EnteredDate; ActionType = "System.WorkItem.ActionLogEnum.RecordOpened"; Title = "Record Opened - Notify Users"; Description = $SRTitle;}
Using-Culture "en-US" {
New-SCSMObjectProjection -Type MYOB.WorkItem.TypeProjections.HasActionLog -Projection $Projection -ComputerName $Server -ErrorAction Stop
} catch {
($_ | ConvertTo-XML).Save("D:\WorkflowLogs\$SRIDInput-RecordOpened-Exception.xml")
throw $_
We currently are experiencing the bug (#5) noted
here which prompted me to take a look at re-running any failed workflows to continue other tasks.
The problem is though that hitting Retry for the workflow doesn't actually submit the workflow request correctly. As far as I can tell it
is running again (it pops in a new entry in the Workflow status list), but no changes are made to the Action Log and nothing is associated with the Work Item.
I think what is happening is the $SRIDInput variable is not populated on the Retry or perhaps has odd data, which would let the script run but not actually do anything (the filter would return no results), I'm going to add a step into the
script to check if $SRIDInput is empty and fail if that's the case, I'll also write the variable to a log file before anything else happens, that should tell me pretty quick.
I wanted to know if anyone else has had trouble using Retry on custom PS workflows? Any tips? Anything obvious I am missing?
Update: After writing this I'm not sure it would actually fail silently with no valid input as theoretically the New-SCSMObjectProjection cmdlet wouldn't have anything to apply to, I'll update the script anyway and see what happens.

What does the error details show? Retrying a workflow that fails rarely works the second time around.
http://codebeaver.blogspot.dk/

Add a custom button on notification page and open a oaf page after button

Hi All,
My Requirement is add a custom button on notification page and after button click with take some parameter from notification page like supplier_id and org_id then open a new oaf page and show supplier credit and debit balance but problem is that button is only enable to a ap invoices notification not for other type of notification.
how to take approach/action i don't know.
it is possible through OAF personalization/customization or it is part of work flow customization.
Navigation path - payable->worklist->open notification and Type of notification also there
Type should be matched with AP_Invoices type notification then custom button enable.
Please Let me know is it possible or not. If possible how to achieve this. ...................................it's argent...plz help me
Edited by: 815572 on Nov 25, 2010 1:15 AM

Hi Irk,
My notification came in given below format (in table) but my custom button only enable for Contract Approval Type not for others..........i hv attach a button on notification page (subject-Contract 21969-R17......)
From Type Subject Sent
Taylor, Phillip Contract Approval Contract 21969 - R17-AUG-07 06:19:27 has been approved by Taylor, Phillip 22-Aug-2007
Taylor, Phillip OKS Contract Process Contract 21975 - R17-AUG-07 06:22:18 for AT&T Universal Card (52,500.00 USD) has been published online 19-Aug-2007
Taylor, Phillip OKS Contract Process Contract 21969 - R17-AUG-07 06:19:27 for AT&T Universal Card (15,000.00 USD) has been published online 19-Aug-2007
If I just put a button SHOW BALANCE just like notification button APPROVE, REJECT, REASSIGN but this button shows all types of notification and my req. is this button show only for Contract Approval type notification. how to handled this issuesss ?
if extend the co of notification page then how to handle TYPE value from worklist page ....please write proper code if u hv any idea...........
Thanks,

Adding custom stamps to many pages in white space.

Is there any way to add a custom stamp to every page of a PDF book and having it placed into the white space on the document? I have found a script that will do every thing except for the 'white space' part of my query, so I don't think I will have much luck.
Watermarks will probably not work in this instance, the stamp needs to be noticible but not in the way, and the watermark will encouter the same placement problem (as it is preferable if the stamp/watermark is not getting the in way of the drawing pdf's content).
Any help will be appreciated, just let me know if you need more clarification.

The question is what do you mean by "white space"? Is it always the same area on the page (like a 2" margin), or is it a different location for each page, where there happens to be no text or images? The former is possible, the latter only partially, and is very difficult to implement with a script.

Setting a Custom Scope in a Page

Greetings again
i am trying to set a custom scope for my pages, i am following the example 6.3.2 Setting Scope in a Page - Create New Task Flow in the Oracle® Fusion Middleware
Developer's Guide for Oracle WebCenter 11g Release 1 (11.1.1) E10148-06.
i have a managed bean whose class name is AdministratorPagView and has a method called getScopeName() that returns a String. My adfc-config.xml archive looks like this
adfc-config xmlns="http://xmlns.oracle.com/adf/controller" version="1.2">
<managed-bean id="__3">
<managed-bean-name id="__1">adminPagView</managed-bean-name>
<managed-bean-class id="__2">view.AdministratorPagView</managed-bean-class>
<managed-bean-scope id="__4">request</managed-bean-scope>
</managed-bean>
</adfc-config>
then in my page definition archive called AdministratorPagPageDef.xml that corresponds to the JSPX where the create page task flow, there is a parameter for that task flow like this:
<parameters>
<parameter id="oracle_webcenter_page_createpage_scopename"
value="${adminPagView.scopeName}"/>
</parameters>
so i try creating a page and when i finish creating it the getPateTreeITerator does not show me anything and looking into the WL Server floders for the mds, i just found a scope.xml file in a path structure like this one
DefaultDomain/webcenter/mds-integServerRepos/<my_app_name>/oracle/webcenter/framework/scope/scopedMD/<custom_scope_name>/scope.xml, but the new folder that reference to a new scope is not being created
is there something i am missing?
Edited by: Luis_muxhaxho_betancourth on 24/06/2010 08:46
Edited by: Luis_muxhaxho_betancourth on 24-jun-2010 18:54

the pages are being placed in a diferent folder from the one used when defaultScope is set, how can i make those pages visible in the page tree for my user ?

Can we modify the standard AOL Message with custom Message in Seeded Page?

Hi,
I have a requirement to change AOL Message with custom Message in Seeded Page.
In a seeded OAF page when a user clicks on a submit button a standard AOL Processing Message is populated.
I Need to change the Standard Message and call Custom Message.
Did controller extension and found that both the messages are populating.
called the code after super and tried to call before super also.
Did any one face this issue and resolved it. Kindly provide the solution.
Regards
Chaitanya

Hi Gyan,
I have tried by extending a sample custom controller.
Below is the code of TestCO calling create message
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
    super.processFormRequest(pageContext, webBean);
      OAApplicationModule am = pageContext.getApplicationModule(webBean);
      if (pageContext.getParameter("Test") != null)
          OAException confirmMessage = new OAException("AK", "FWK_TBX_T_EMP_CREATE_CONFIRM",    null,
          OAException.CONFIRMATION, null);
          pageContext.putDialogMessage(confirmMessage);
}Then I extending the TestCO to XXTestCO and it is calling Update Message
    public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
      super.processFormRequest(pageContext, webBean);
        OAApplicationModule am = pageContext.getApplicationModule(webBean);
        if (pageContext.getParameter("Test") != null)
            OAException confirmMessage = new OAException("AK", "FWK_TBX_T_EMP_UPDATE_CONFIRM",    null,
            OAException.CONFIRMATION, null);
            pageContext.putDialogMessage(confirmMessage);
    }got below Confirmation
Confirmation
Employee &EMP_NAME with the number &EMP_NUMBER has been created.
Employee (&EMP_NAME) has been updated.
Tried below approach also calling the message before super class
    public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
        OAApplicationModule am = pageContext.getApplicationModule(webBean);
        if (pageContext.getParameter("Test") != null)
            OAException confirmMessage = new OAException("AK", "FWK_TBX_T_EMP_UPDATE_CONFIRM",    null,
            OAException.CONFIRMATION, null);
            pageContext.putDialogMessage(confirmMessage);
      super.processFormRequest(pageContext, webBean);
    }got below Confirmation
Confirmation
Employee (&EMP_NAME) has been updated.
Employee &EMP_NAME with the number &EMP_NUMBER has been created.
My requirement is to print only the message which I have kept in Extended controller i.e. Update message
Regards,
chaitanya

Customizing 'My Workflow Assignments' page

Similar Messages

Maybe you are looking for