CX_SY_FILE_OPEN_MODE - short dump on production but not in Dev and Test
Hello,
I'm getting the follwoing short dump in production when I run the program which writes the data to application server. I have open data set and close data set. Same program when I in development and test I do not get any short dump. Can any know what could be cause for this.
CX_SY_FILE_OPEN_MODE
Copy paste of error analysis from ST22 short dump -
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_FILE_OPEN_MODE', was not
caught in
procedure "DATA_UPLOAD_APP_SERVER" "(FORM)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
When accessing the file "/bw/FTPOUT/BPR/OTHER/test.csv", the system recognized
that this file is
not open. Therefore, the file cannot be accessed.
The file could not be OPENed in your production system for a variety of reasons - no authorization, file doesn't exist etc. You should have check sy-subrc right after OPEN DATASET and if not zero, yous should not TRANSFER or READ the file and instead you should have given a message with sy-msgid and sy-msgno which would give you the reason. The dump here is simply saying that OPEN is unsuccessful, so any subsequent READ or TRANSFER would throw runtime dump, if done after an unsuccessful OPEN.
Similar Messages
-
ZReport getting dump in Production but not in Quality and development
Hi,
There isa Zreport which displays daily stock in PP module.
It is getting dump in Production not in quality and development.
Since four days it is getting dump. Before that it is fine.
Please any one guide How to resolve.
Advance Thanks.Runtime Error SAPSQL_IN_ITAB_ILLEGAL_OPTION
Occurred on 29.08.2007 at 08:50:13
<u>Invalid value in OPTION field of value table for IN itab operator.</u>
What happened?
<b>Error in ABAP application program.</b>
The current ABAP program "ZPPRDR417" had to be terminated because o
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and admin
termination messages, especially those beyond their normal deletio
date.
<b>Error analysis</b>
The current ABAP/4 program attempted to execute an ABAP/4 Open SQL
statement in which the WHERE condition contains an IN itab operator
The IN itab operator is used with internal tables which
have the following structure:
SIGN(1) OPTION(2) LOW LIKE db_field HIGH LIKE db_field
The OPTION column should contain only one of the following values:
"EQ LE GE CP BT NE LT GT NP NB"
The value " " is not allowed here.
<b>How to correct the error</b>
Use only one of the permitted values in the OPTION column.
Information on where terminated
The termination occurred in the ABAP program "ZPPRDR417" in "WIP_STOCK_REP
The main program was "ZPPRDR417 ".
The termination occurred in line 330 of the source code of the (Include)
program "ZPPRDR417_FORM"
of the source code of program "ZPPRDR417_FORM" (when calling the editor 33
Source code extract
Caution: Program has changed
Caution: At time of termination, Active source code no longer available
003000 ? r_bwart-low = '106'.
003010 ? append r_bwart.
003020 ?
003030 ? r_bwart-low = '124'.
003040 ? append r_bwart.
003050 ?
003060 ? r_bwart-low = '125'.
003070 ? append r_bwart.
003080 ?
003090 ? select matnr
003100 ? werks
003110 ? into table i_marc
003120 ? from marc
003130 ? where ( matnr LIKE 'BILC%'
003140 ? OR matnr LIKE 'LGN%'
003150 ? OR matnr LIKE 'BRN%'
003160 ? OR matnr LIKE 'EBB%' )
003170 ? AND matnr NE 'BRN_DECLASSE'
003180 ? AND matnr NE 'BRN_SAF'
003190 ? and werks in r_werks.
003200 ?
003210 ? r_material-sign = 'I'.
003220 ? r_material-option = 'EQ'.
003230 ?
003240 ? loop at i_marc into wa_marc.
003250 ? r_material-low = wa_marc-matnr.
003260 ? append r_material.
003270 ? endloop.
003280 ? clear r_material.
003290 ?
> ? if not i_matdoc is initial.
003310 ? select MBLNR
003320 ? MJAHR
003330 ? ZEILE
003340 ? BWART
003350 ? MATNR
003360 ? WERKS
003370 ? SHKZG
003380 ? MENGE
003390 ? UMWRK
003400 ? into table i_mseg_qty
003410 ? from mseg
003420 ? for all entries in i_matdoc
003430 ? where MBLNR eq i_matdoc-MBLNR
003440 ? and MJAHR eq i_matdoc-MJAHR
003450 ? and BWART in r_bwart
003460 ? and matnr in r_material
003470 ? and werks in r_werks.
003480 ?
003490 ? sort i_mseg_qty by matnr. -
IPod shows up in system profiler but not in /dev and disk utility
Hi,
I have a Problem with my iPod. It works perfectly when I connect it to other macs.
Though on my mac it appears only in the system profiler, but not in itunes, /dev or diskutilities. Other USB devices are working correctly.
I already reseted my ipod but this doesn't solve the problem. Neither did the update of the iPod firmware.
Does somebody know this Problem? What can I try to solve it?
Thanks.
About my iPod:
It's an iPod Touch, system Profiler is telling:
Version: 0.01
Bus Power (mA): 500
Speed: Up to 480 Mb/sec
Manufacturer: Apple Inc.
Product ID: 0x1293
Serial Number:
Vendor ID: 0x05ac (Apple Computer, Inc.)
iTunes says:
serial number: 910952nua75j
Running the system 4.2.1
About my Mac:
It's a MacBook Pro, 2,16 GHz Intel Core 2 Duo, running 10.4.11I'm pretty upset. It seems that the only solution to this problem is to buy some new mac products!
I have Applications on my computer that will not work on a new system and I don't want to update my system + all expensive apps just because my ipod refuse to downgrade.
I used to be a mac fan and I still like it, but this kind of "tricks" are unacceptable. I bought an ipod because I didn't want to spend time on fixing some stupid problems and now I already spent weeks trying to make my expensive ipod work on my mac (and all this because of a stupid firmware problem). I am now really disapointed.
So if anyone should have an idea on if it's possible to downgrade my ipod (or other solution?) in order to make it work again with my system, please post it here. Thanks. -
List view threshold showing error on Production but not on Dev
I have a library on Production containing 6000 items.
There is a web part which displays items from that library (all on one page) and it is showing error because the items exceeded 5000 limit.
The same web part on Dev is not showing error when I display 6000 records from that list on a single page.
List view threshold is set to 5000 on both Production and Dev.
Why both servers are showing different behaviors? Is there some other setting other than List view threshold different on Production than Dev?
Where do I look?Hi Frank,
The number of items in a folder needs to be less or equal to the list view threshold.
If a list/library has 4000 items and a folder with 3000 items, both the folder view and the root folder view will
work for a list view threshold of 5000. However, if the folder or root folder grows to have more than 5000 items,
it will stop displaying items in the default view.
The easiest and quickest solution is to change the list view threshold for the period you migrate the site, then change it back to default. To do this follow the steps:
go to your SP2013 Farm's Central Administration
go to the "Manage Web Applications" under the "Application
Management" section
select the "Web Application" where you migrate the site
click the "General Settings" dropdown and select "Resources
Throttling"
change the "List View Threshold" to 12000 if your library has 11000 pages
migrate your site from SP2010 to SP2013
change the "List View Threshold" back to 5000.
SharePoint 2013 works the same as 2010 in terms of list view threshold: you can use folders and/orviews filtered on indexed columns to
access items in a list/library with more than 5000 of items.
When you try to add/delete an entire list/library that has more than 5000 items, then the operation fails. The solutions here are:
see what I've said at point 2. above
enable the "Daily Time Window for Large Queries" option located in the same place as the "List View Threshold".
This enables you to get around the "List View Threshold" during the time window you set, which could be sometime at 23:00 when nobody accesses SharePoint, for example. You can migrate your site during that time window.
Indul Hassan
Microsoft Community Contributor
http://www.indulhassan.com
You Snooze.. You Lose !! -
I was transferred to the US appstore site by following a link. The product was not available there and I was told to go back to the UK site. But how???
Change App Store
1. Tap "Settings"
2. Tap "iTunes & App Stores"
3. Tap on your Apple ID
4.Tap "View Apple ID"
5. Enter your user name and password.
6. Tap "Country/Region."
7. Tap "Change Country/Region"
8. Select the region where you are located.
9. Tap "Done".
Note: If the change doesn't take effect, sign out of account and sign in again. -
how to remove 1797 emails. stuck in inbox. but not showing anymore - and i have the same problem wit the sent. please help
This is a user supported frum, so making threats really doesn't help, besides which it's not like any of us can really make a dent in Toshiba's bottom line despite how many people we think we can influence. Unless those people were standing in line to buy a Toshiba product cash in hand, and you pulled them out, it really doesn't add up for them.
At this point it would probably be better for you to use the 800 number. Have all your e-mails ready to forward, if needed, to whoever you end up talking to. Don;t let them off the hook. An hour on the phone is much better than weeks passing e-mails through a support site. Also contest the charge with your bank or credit card. -
QUESTION.
Hallo , my question is ;whenever I delete a photo and restore it through Time machine and Western digital external hard drive , I am able to restore the photo but not the titles and descriptions . Western Digital inform me that it isn't their external hard drive problem and suggest that it is an Apple software problem ?
I am using a Macbook 4.1 , with Mac OSX 10.5.8 . I photo 7.1.5 , last modifie4d 01/05/2010 -universal . Should I be upgrading Iphoto ?
I hope that someone is able to help in this matter , as i have to restore 12000 photos !
Thanking you in anticipation.
Alan from WigtonHallo Kieth ,
I am not quite ready to restore the full iphoto library , as I have days of work re - imputting titles,descriptions and enhancement . I hope that your suggestion works , as I use my Macbook basically to work with digital photography. Through time , I will need to delete my library to recover more disc space and I would hate to have to spend more time re - imputting titles and descriptions all over again .
Thanks for your interest and advice.
regards - Alan -
hello my name is kirstie, i updated to firmware 4.2.1 .....my iphone 3g stays on the apple logo for about 4 minutes then flashes white and goes back to the apple screen, it repeats untill battery is flat, every now and then im lucky enough to get it to turn on but not very often and then it freezes and repeats the same problem?? (if i turn the phone off my pressing the two buttons it wont keep rebooting, its only when i leave it after turning it on)
I have reset the phone, full firmware restore, even downgraded back from firmware 4.2.1 to .3.1.3 official by using dfu mode and still doesnt fix.
(i correctly got out of dfu mode after the downgrade)
i can enter dfu mode and recovery, and update through itunes with no problem, but it doesnt fix the problem,
i have searched and found no answer to this problem, every option availible to try that i know of i have tried and failed. i dont care about preserving my content i just want a fix. i have a good understanding how to operate software on a computer and shouldnt be too confused by any advice given, so plz even if the answer is very complex i wish to try anything, please help me to get my iphone working.Anyone have any suggestions? or is everyone else just as clueless as me !
-
I changed my User ID it changed on my phone but not on iCloud and it wont let me change my apple ID to my new ID how do I fix this?
To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use. When you delete the existing account you will get an option to keep the iCloud data on your device.
Before deleting the account, save any photo stream photos that you want to keep to your camera roll. -
I can airprint from my macbook and imac but not my iphone and ipad, whats wrong?
I can airprint from my macbook and imac but not my iphone and ipad, whats wrong?
I'm aware that all printers are not airprint enabled but since i can print form my imac that should not be a problem right?Hey Fredrik68,
I would double check and see if you meet all the requirements for AirPrint here, including the printer model:
AirPrint Basics
http://support.apple.com/kb/HT4356
Have a good one,
Delgadoh -
i have music on my phone but not in itunes and i cant get it off my phone .I dont know how it got there , but i suspect it came from icloud.
if it doesnt match that means your iPhone is not provisioned for the carrier you are trying to use. Your iPhone would need to be unlocked in order to use on other carriers. You will need to contact your carrier to see if this iPhone is unlocked py providing them the IMEI. If the iPhone is not unlocked you will need to contact the carrier that the iPhone is locked to to see if they will unlock the device to use on another carrier.
-
Printing from web pages is excruciatingly slow since downloading most recent upgrades of Firefox Mozilla. I have a desktop iMac, OS 10.6.8, and an HP officejet printer 4500 G510n. The printer works fine with the Safari Browser and with woodprocessed files, but not with Firefox and web pages. Help please! It used to print fast with earlier versions of Firefox.
Hello and welcome to the Apple Discussions Forum.
I have hardly any experience with HP printers but since your posting has not been replied to yet I thought I'd offer some assistance.
With the printer status and ink levels working, it shows that you have a connection to the printer. So I would look at the issue being with the protocol being used for the print queue on the Mac.
Since you have XP and Vista working, I would check the printer queue configuration on either box. In XP, go to the Properties and select Ports. Click the Configure Port tab to view the connection. If you are using RAW, then this is known as HP Jetdirect-Socket on OS X. So if you are not sure what protocol was used before I would create another printer queue, this time selecting IP > HP Jetdirect-Socket. Then enter your IP address and select the K5400dn from the Print Using menu.
If this still fails to print then please reply. There may be limitations with adding the HP driver this way that I am not aware of. There may also be other driver options you can look at, such as HPIJS. If Greg Sahli reads this posting he has expert knowledge on this matter and will be able to offer some guidance.
PaHu -
Short dump GETWA_NOT_ASSIGNED field symbol not been assigned
Hi Gurus,
I am calling a RFC BAPI_PBSRVAPS_CHANGEKEYFIGVAL2 from R/3 sytem to SCM 5.0.
Acutally this FM BAPI_PBSRVAPS_CHANGEKEYFIGVAL2 not available in R/3 system.
So i am using scm destination and calling above FM directly from R/3 but i am getting the short dump
in SCM system as GETWA_NOT_ASSIGNED field symbol not been assigned.
Can you pls check and advise.
Best Regards,
Radhakrishna.Hi Radhakrishna,
It looks like you have a discrepancy in the planning area with respect to keyfigure. Some thing like the key figure description is not synchronized between live cache and db.
I suggest you log onto your SCM system, run the program /SAPAPO/TS_LCM_CONS_CHECK on your planning area with correct error option.
Please let me know if this works. -
Short dump in Production system !!!
Hi Experts,
We have getting a short dump for all actions in Production system. Suppose if we use se38 and tried to press display it shows a short dump error. Despite when we tried to use tcodes or using LSMW or try to execute a program or like this all type of actions its throws a short dump error. Dont know what is the reason behind that since the short dump is not the defined the reason for the dumb. Have any of you experts got this type of experience?. Pls give your ideas. Thanks in advance.Hello Kavi,
Contact your basis team. SNAP is a table which holds all ABAP dump. It looks like SNAP table is full and cannot accomodate new entries.
In any production enviornment, the SNAP entires will be deleted regularly and only dumps for the last 8 days will be available
Check if any job(SM36 or table tbtcp) is running for this program RSSNAPDL in your production system.
Thanks -
Short dump on production server
ABAP runtime errors GETWA_NOT_ASSIGNED
Occurred on 28.12.2007 at 11:16:11
>> Short dump has not been completely stored. It is too big.
Field symbol has not yet been assigned.
What happened?
The current ABAP/4 program "SAPLCEI0 " had to be terminated because
one of the statements could not be executed.
This is probably due to an error in the ABAP/4 program.
What can you do?
Note the actions and input that caused the error.
Inform your SAP system administrator.
You can print out this message by choosing "Print". Transaction ST22
allows you to display and manage termination messages, including keeping
them beyond their normal deletion date.
Error analysis
You attempted to access an unassigned field symbol
(data segment 2941).
This error occurs:
- if you address a typed field symbol before it has been set with
ASSIGN or
- if you address a field symbol that has been reset with UNASSIGN
or pointed to a local field that no longer exists, or
- if you address a field symbol that pointed to a line of an internal
table that has now been deleted, or
- if you address a global function interface partameter, even
though the relevant function module is not active,
i.e. it is not in the list of active calls. You can get the list
of active calls from the this short dump.
How to correct the error
If the error occurred in a non-modified SAP program, you may be
able to find a solution in the SAP note system.
If you have access to the note system yourself, use the following
search criteria:
"GETWA_NOT_ASSIGNED"
"SAPLCEI0 " or "LCEI0U29 "
"CEI0_DDB_HAS_VALUES_INTERNAL"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "46C"
Application server....... "SAPCLUN"
Network address.......... "172.18.112.20"
Operating system......... "Windows NT"
Release.................. "5.2"
Hardware type............ "16x Intel 80158"
Database server.......... "DBCLUN"
Database type............ "MSSQL"
Database name............ "PRD"
Database owner........... "dbo"
Character set............ "English_United State"
SAP kernel............... "46D"
Created on............... "Apr 9 2006 21:37:58"
Created in............... "NT 4.0 1381 Service Pack 6 x86 MS VC++ 12.00"
Database version......... "SQL_Server_7.00 "
Patch level.............. "2225"
Patch text............... " "
Supported environment....
Database................. "MSSQL 6.5.213 or higher, MSSQL 7.0.1 or higher"
SAP database version..... "46D"
Operating system......... "Windows NT 4.0, Windows NT 5.0, Windows NT 5.1,
Windows NT 5.2, , System build information:,
, LCHN : "
User, transaction...
Client.............. 400
User................ "QPBASIC"
Language key........ "E"
Transaction......... "QA02 "
Program............. "SAPLCEI0 "
Screen.............. "SAPLQPL1 0200"
Screen line......... 34
Information on where termination occurred
The termination occurred in the ABAP/4 program "SAPLCEI0 " in
"CEI0_DDB_HAS_VALUES_INTERNAL".
The main program was "SAPLQPL1 ".
The termination occurred in line 49
of the source code of program "LCEI0U29 " (when calling the editor 490).
Source code extract
000190 *" EXCEPTIONS
000200 *" NOT_FOUND
000210 *"----
000220
000230 DATA:
000240 ls_charac TYPE api_char,
000250 lt_charac TYPE STANDARD TABLE OF api_char,
000260 ls_vali TYPE api_vali.
000270
000280 DATA: ls_mi TYPE ts_mi,
000290 ls_wi TYPE ts_wi,
000300 ls_icv TYPE ts_value,
000310 ls_defval TYPE ts_defval,
000320 ls_inco_val TYPE ts_inco_val,
000330 ls_char_list TYPE ts_char_list,
000340 lv_subrc TYPE sy-subrc,
000350 lv_kntype TYPE cukntype.
000360
000370 data: ls_vallist TYPE ddb_c04, "676840
000380 lt_vallist TYPE STANDARD TABLE OF ddb_c04, "676840
000390 ls_restrict type ddb_c03, "699141
000400 lt_restrict type STANDARD TABLE OF ddb_c03, "699141
000410 lv_rflag type c. "676840
000420
000430 *----
000440 REFRESH exp_values.
000450
000460 DESCRIBE TABLE imp_characteristics LINES sy-tfill.
000470 IF sy-tfill EQ 0.
000480 LOOP AT
INTO ls_char_list.
000500 ls_charac-atinn = ls_char_list-atinn.
000510 APPEND ls_charac TO lt_charac.
000520 ENDLOOP.
000530 ELSE.
000540 lt_charac = imp_characteristics[].
000550 ENDIF.
000560
000570 LOOP AT lt_charac
000580 INTO ls_charac.
000590 IF ls_charac-atnam NE space.
000600 * input: name
000610 PERFORM read_mi_with_atnam
000620 USING
000630 ls_charac-atnam
000640 CHANGING
000650 lv_subrc
000660 ls_mi.
000670 ELSE.
000680 * input: atinn
Contents of system fields
SY field contents..................... SY field contents.....................
SY-SUBRC 0 SY-INDEX 0
SY-TABIX 0 SY-DBCNT 1
SY-FDPOS 1 SY-LSIND 0
SY-PAGNO 0 SY-LINNO 1
SY-COLNO 1
Chosen variables
Name.......................... Contents.1........2........3....+....4
PROP_BITMAP 310
3000
6100
ALLOWED_VALUES
2
0
PROP_WIDTH 300
2000
C100
ASSIGNED_VALUES X
5
8
TOP_WINDOW 33
2000
1000
ASSIGNED_VALUES_API_DI
2
0
PROP_INDEX 350
5000
E100
DEFAULT_VALUES
2
0
DYNPRO_9 19
1000
3000
DEFAULT_VALUES_API_DN
2
0
DYNPRO_8 18
1000
2000
DEFAULT_VALUES_API_ST
2
0
DYNPRO_7 17
1000
1000
DOCUMENT_INFO
2
0
PROP_SOUND 340
5000
4100
FIRST_ASSIGNED_VALUE
2
0
PROP_TEXT 330
4000
A100
INCONSISTENT_VALUES
2
0
LANGUAGE E
4
5
SY-LANGU E
4
5
PROP_BITMAP_STYLE 320
4000
0100
VALID_VALUES
2
0
PROP_FONT_SIZE 380
7000
C100
EXP_VALUES[] #########################À##°###########
0000000000000000000000000C00B00000000000
00000000000000000000000040000A0000000000
... + 40 ################ÿÿÿÿ####################
0000000000000000FFFF00000000000000000000
1000000000001000FFFF81007000430000000000
... + 80 ################################
00000000000000000000000000008000
00000000000000000000000000004100
PROP_ITEM 370
7000
2100
IMP_CHARACTERISTICS[] #########################À##############
0000000000000000000000000C00800000000000
00000000000000000000000040000A0000000000
... + 40 ################ÿÿÿÿI###################
1000000000000000FFFF40000000000000000000
0000000000000000FFFF90002000430000000000
... + 80 ################################
00000000000000000000000000008000
00000000000000000000000000005100
SCREEN-ACTIVE 0
3
0
SY-XPROG SAPCNVE
5454454222222222222222222222222222222222
3103E65000000000000000000000000000000000
TVS_EDITLABELS 6
0000
6000
SY-TFILL 0
0000
0000
INCL_PRICE 0000
3333
0000
LS_CHAR_LIST 00000000000000000000
3333333333333333333322222222222
0000000000000000000000000000000
RSJOBINFO 00000000
2222222222222222222222222222222233333333
0000000000000000000000000000000000000000
... + 40 000000
3333332222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 80 ####
0000
0000
SYST ########################################
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
... + 40 ####################################I###
0000000000000000000000000000000000004000
1000100010000000100000000000000000009000
... + 80 ########################################
0000000000000000100000000000000000000000
0000000000000000E00000000000000000000000
... + 120 ####################################p###
00000000
0000000
LT_CHARAC Table[initial]
0000FFFD
0000FFFF
LS_CHARAC 0000000000
3333333333222222222222222222222222222222
0000000000000000000000000000000000000000
... + 40
222222222222222222222222222222222
000000000000000000000000000000000
SPACE
2
0
Active calls / events
No.... Type........ Name..........................
Programm
Include Line
1 FUNCTION CEI0_DDB_HAS_VALUES_INTERNAL
SAPLCEI0
LCEI0U29 49
2 FUNCTION QMCF_CONFIGURATION_READ
SAPLQMCF
LQMCFU02 61
3 FUNCTION QMCF_SPECIFICATION_CONFIG_READ
SAPLQMCF
LQMCFU01 60
4 FUNCTION QPAP_PLAN_READ
SAPLQPAP
LQPAPU02 297
5 FUNCTION QEEV_TABLES_GENERATE
SAPLQEEV
LQEEVU01 118
6 FORM MERKMALSSAETZE_ANLEGEN
SAPLQPL1
LQPL1F12 85
7 FORM ST_RECHNE_571
SAPLQPL1
LQPL1F1L 26
8 FORM OK_PROBENBERECHNUNG
SAPLQPL1
LQPL1F1W 23
9 FORM FCODE_BEARBEITEN
SAPLV00F
LV00FF0F 97
10 FUNCTION SCREEN_SEQUENCE_CONTROL
SAPLV00F
LV00FU02 46
11 FORM FCODE
SAPLQPL1
LQPL1F2D 61
12 MODULE (PAI) FCODE
SAPLQPL1
LQPL1I0P 11
Internal notes
The termination occurred in the function "getwa_abswa" of the SAP
Basis System, specifically in line 1003 of the module
"//bas/46D/src/krn/runt/abgetwa.c#20".
The internal operation just processed is "LOOP".
The internal session was started at 20071228111310.
Active calls in SAP kernel
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Callstack without Exception:
App : disp+work.EXE (pid=500)
When : 12/28/2007 11:16:13.65
Threads : 2
Computer Name : ELEPRDCI
User Name : prdadm
Number of Processors: 16
Processor Type: x86 Family 15 Model 4 Stepping 8
Windows Version : 5.2 Current Build: 3790
Stack Dump for Thread Id a5c
eax=00000000 ebx=000003a8 ecx=00000e58 edx=00000000 esi=000003a8 edi=00000000
eip=7c82ed54 esp=03138cc4 ebp=03138d34 iopl=0 nv up ei ng nz ac po cy
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000297
function : KiFastSystemCallRet
7c82ed54 c3 ret
7c82ed55 8da42400000000 lea esp,[esp] ss:03138cc4=7c822124
7c82ed5c 8d642400 lea esp,[esp] ss:40cd7cc3=????????
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
03138d34 77e6ba12 000003a8 0001d4c0 00000000 03138d6c ntdll!KiFastSystemCallRet
03138d48 00baaa71 000003a8 0001d4c0 77bf1d88 00000002 kernel32!WaitForSingleObject
03138d6c 004d113b 004d10fc 77bf1d88 77bf1d88 77bf1d88 disp+work!
04b5ffb8 77e66063 00215740 00000000 00000000 00215740 MSVCRT!endthreadex
04b5ffec 00000000 77bcb4bc 00215740 00000000 00000000 kernel32!GetModuleFileNameA
List of ABAP programs affected
Type
Program
Gen. date time
LoadSize
Prg
SAPLQPL1
17.09.2006 09:35:11
479232
Prg
SAPMSSYD
14.08.2000 15:39:21
16384
Prg
SAPFSYSCALLS
21.12.1999 19:32:31
7168
Prg
CL_EXITHANDLER================
18.12.2004 13:14:45
13312
Prg
CL_ABAP_TYPEDESCR=============
04.01.2000 19:06:00
17408
Prg
CL_ABAP_ELEMDESCR=============
04.01.2000 19:06:00
13312
Prg
CL_ABAP_DATADESCR=============
04.01.2000 19:06:00
11264
Prg
CL_ABAP_REFDESCR==============
04.01.2000 19:06:00
14336
Prg
CL_ABAP_STRUCTDESCR===========
04.01.2000 19:06:00
16384
Prg
CL_ABAP_COMPLEXDESCR==========
04.01.2000 19:06:00
11264
Prg
CL_ABAP_TABLEDESCR============
04.01.2000 19:06:00
16384
Prg
CL_ABAP_CLASSDESCR============
04.01.2000 19:06:00
23552
Prg
CL_ABAP_OBJECTDESCR===========
04.01.2000 19:06:00
28672
Prg
CL_ABAP_INTFDESCR=============
04.01.2000 19:06:00
21504
Prg
IF_EX_INSPECTIONLOT_UPDATE====
13.07.2002 00:12:42
5120
Typ
SXS_INTER
30.11.1998 15:55:16
1024
Prg
SAPLSEXV
17.09.2006 08:50:01
155648
Prg
SAPLSXCH
18.12.2004 13:22:27
80896
Typ
V_EXT_ACT
14.10.1999 22:16:55
2048
Prg
CL_EX_INSPECTIONLOT_UPDATE====
13.07.2002 00:12:42
26624
Prg
SAPLV00F
08.03.2001 10:01:57
68608
Typ
T185E
15.07.1997 16:57:08
2048
Typ
T185F
14.08.1997 21:32:52
2048
Typ
T185
16.08.2000 11:43:40
3072
Typ
T185V
10.11.1999 17:45:26
4096
Typ
TQ01
14.02.1998 14:07:17
2048
Prg
SAPLSTXD
17.09.2006 08:53:44
406528
Prg
SAPCNVE
04.01.2000 19:06:37
7168
Prg
SAPLLANG
04.01.2000 19:06:49
9216
Prg
SAPLV01Z
17.09.2006 09:34:42
210944
Prg
SAPLCLFM
17.09.2006 09:34:56
688128
Prg
SAPLCUOB
17.09.2006 09:18:21
34816
Prg
SAPLCLSE
13.02.2005 06:50:14
177152
Prg
SAPLCTMS
17.09.2006 09:34:59
942080
Prg
SAPLCTCV
17.09.2006 09:27:23
192512
Prg
SAPLCTCF
12.02.2005 20:42:31
24576
Prg
SAPLV01P
17.09.2006 09:34:42
166912
Prg
SAPLMFAW
18.12.2004 14:02:28
51200
Typ
TFAWY
29.07.1998 19:48:52
2048
Typ
TFAWL
29.07.1998 19:48:49
2048
Typ
TFAWX
29.07.1998 19:48:51
2048
Typ
TFAW
29.07.1998 19:48:45
2048
Prg
RDDFIE00
04.01.2000 19:06:11
19456
Prg
SAPLQAST
13.02.2005 07:23:55
28672
Prg
SAPLBSVA
17.09.2006 09:02:09
270336
Prg
SAPLQSTA
20.01.2000 10:08:08
26624
Typ
TQ01A
29.07.1998 19:56:34
2048
Prg
SAPLOMCV
04.01.2000 19:06:50
14336
Typ
TMCNV
24.02.1999 03:33:25
2048
Prg
SAPLSCNT
15.11.2001 05:19:20
28672
Prg
SAPLSVSM
15.11.2001 05:19:20
25600
Prg
SAPLSGUI
15.11.2001 05:19:20
33792
Prg
SAPLSTTM
17.09.2006 08:49:52
83968
Prg
SAPLSBDC
17.09.2006 08:46:17
66560
Prg
CL_DATAPROVIDER===============
15.11.2001 05:19:18
50176
Typ
OBJ_RECORD
14.02.1998 08:30:43
2048
Prg
SAPLSTUP
17.09.2006 08:46:10
96256
Prg
SAPLCNDP
17.09.2006 08:53:21
201728
Prg
SAPFGUICNTL
18.12.2004 11:31:41
20480
Prg
SAPLOLEA
12.07.2002 21:39:11
81920
Prg
SAPLSFES
17.09.2006 08:53:22
164864
Prg
SAPLGRFC
12.07.2002 21:39:11
16384
Prg
SAPSHDTV
18.12.2004 12:16:52
36864
Typ
SHDSTU
14.12.1998 23:15:34
1024
Typ
SHDSTCIU
14.12.1998 23:15:34
1024
Prg
CL_GUI_PROPS_CONSUMER=========
18.12.2004 11:27:30
26624
Prg
CL_DYNAMIC_GUI_EXTENSIONS=====
11.02.2000 14:36:06
55296
Prg
CL_GUI_DATAMANAGER============
18.12.2004 11:34:01
82944
Prg
/1BCDWBEN/SAPLQEN0000
13.07.2002 02:11:40
51200
Prg
SAPLSENA
04.01.2000 19:06:53
28672
Prg
SAPLQELA
17.09.2006 09:27:48
415744
Typ
QALS
13.07.2002 00:12:42
27648
Prg
SAPLQAUT
13.02.2005 01:25:27
177152
Prg
SAPLSWUG
17.09.2006 08:53:33
264192
Typ
SWOTOBJID
04.05.1995 15:20:52
2048
Typ
SWHACTOR
04.04.1995 16:18:07
1024
Prg
CL_GOS_MANAGER================
17.09.2006 08:53:30
24576
Prg
CL_GOS_VIEW_MANAGER===========
21.12.1999 19:23:29
29696
Typ
SGOS_MVOBJ
01.12.1999 08:16:05
2048
Prg
SAPLSUU1
17.09.2006 08:53:37
183296
Typ
USR02
15.11.2001 05:09:06
5120
Typ
USREFUS
18.12.2004 11:18:28
1024
Prg
SAPLTHFB
17.09.2006 08:53:29
270336
Typ
BORIDENT
28.08.1997 08:38:50
1024
Prg
CL_GOS_TOOLBOX_MODEL==========
17.09.2006 08:53:30
39936
Typ
SGOS_MODL
08.02.2000 16:42:30
3072
Prg
SAPLBDLS
14.08.2000 15:20:53
13312
Typ
T000
11.09.1997 10:17:18
3072
Prg
CL_GOS_PUBLICATION============
17.09.2006 08:53:30
24576
Prg
CL_GUI_OBJECT=================
15.11.2001 05:19:18
187392
Prg
CL_GUI_CFW====================
18.12.2004 13:28:20
195584
Typ
TOLE
29.07.1998 19:56:01
2048
Prg
SAPLSGOSHIST
17.09.2006 08:53:33
56320
Prg
SAPFSGOS
08.11.2003 23:57:36
13312
Typ
SGOSHIST
14.10.1999 22:09:01
2048
Prg
SAPLURFC
04.01.2000 19:08:13
14336
Prg
CL_GOS_STARTER================
09.12.1999 13:49:28
21504
Prg
CL_GUI_CONTROL================
08.11.2003 23:57:31
117760
Prg
CL_GUI_TOOLBAR================
15.11.2001 05:19:18
72704
Prg
CL_GUI_GOS_CONTAINER==========
01.02.2000 10:16:37
38912
Typ
CFW_LINK
01.12.1999 12:16:48
2048
Prg
CL_GUI_CONTAINER==============
15.11.2001 05:19:18
58368
Prg
SAPLCNTH
08.11.2003 23:56:48
26624
Prg
SAPLSCONTROLINFO
04.01.2000 19:06:52
13312
Prg
SAPLSCONTROLSTATUSCHECK
04.01.2000 19:06:52
10240
Typ
USR05
09.07.1997 23:46:52
1024
Typ
CNTLWARN
25.01.1999 13:09:44
2048
Prg
SAPLICON
17.09.2006 08:39:01
25600
Prg
%_CICON
14.08.2000 15:39:36
55296
Typ
JSTO
27.08.1994 20:32:55
2048
Typ
JEST
27.08.1994 20:32:50
2048
Prg
SAPLAIEV
15.11.2001 05:18:17
14336
Prg
CL_OS_TRANSACTION_END_NOTIFIER
18.12.2004 13:21:30
8192
Typ
LFA1
13.07.2002 01:08:16
12288
Prg
SAPLCPDB
17.09.2006 09:17:36
113664
Typ
PLKO
15.01.1999 22:26:42
9216
Prg
SAPLCCPR
17.09.2006 09:09:14
231424
Typ
TCC08
17.03.1999 16:30:21
4096
Typ
AEEF
13.02.2005 06:49:14
3072
Typ
TCC10
23.04.1998 14:45:07
2048
Typ
TCCET
28.08.1997 09:33:24
1024
Typ
TCCEP
20.08.1998 11:28:15
2048
Typ
TCCER
10.11.1998 05:49:03
2048
Typ
TCCETT
14.02.1998 12:45:20
1024
Typ
TCCEPT
14.02.1998 12:45:07
1024
Typ
TCCERT
17.03.1999 16:24:38
2048
Typ
TCCS01
27.08.1999 18:28:00
1024
Prg
SAPLCCHO
17.09.2006 09:18:17
55296
Prg
SAPLCPTA
17.09.2006 09:09:03
122880
Prg
SAPLCQTA
17.09.2006 09:34:41
88064
Typ
TQ33
10.07.1997 00:12:25
2048
Typ
TQ30
15.04.1998 00:38:23
3072
Typ
TQ30T
14.02.1998 14:11:06
2048
Prg
SAPLCV141
17.09.2006 09:18:22
86016
Typ
DRAD
01.12.1999 15:17:34
3072
Prg
SAPLBSVT
16.08.2000 11:43:43
18432
Prg
SAPLSMSG
18.12.2004 13:27:29
108544
Typ
TJ05
30.11.1993 16:45:10
1024
Typ
TJ01
01.03.1999 13:50:12
4096
Typ
TJ07
30.11.1993 16:45:13
1024
Typ
TJ06
30.11.1993 16:45:11
1024
Typ
TJ03
16.08.2000 11:43:42
2048
Prg
SAPFGUICNTL_CFW
15.11.2001 05:19:19
17408
Prg
CL_GUI_DOCKING_CONTAINER======
15.11.2001 05:19:18
50176
Prg
SAPLQBCK
17.09.2006 09:27:37
106496
Typ
QINF
09.12.1999 19:04:48
5120
Typ
MTQSS
23.04.1998 14:51:52
4096
Prg
SAPLMAQM
17.09.2006 09:35:30
61440
Typ
T001W
18.11.1998 16:27:15
1024
Typ
T001K
01.02.2000 14:56:09
3072
Prg
SAPLMG21
17.09.2006 09:34:30
159744
Typ
MARA
17.09.2006 09:17:34
15360
Prg
SAPLMG22
17.09.2006 09:17:36
115712
Typ
MARC
04.01.2000 18:04:45
23552
Typ
RMQEA
13.08.1997 12:52:02
9216
Typ
TJ02
27.03.1996 18:28:28
1024
Typ
TJ02T
14.02.1998 13:40:18
2048
Typ
TJ04
30.11.1993 16:45:08
2048
Prg
SAPLKDIC
04.01.2000 19:06:48
17408
Prg
SAPLSDTO
04.01.2000 19:06:52
25600
Typ
DD07T
12.05.1997 16:45:51
2048
Prg
SAPLCSCE
04.01.2000 19:06:44
8192
Typ
T024E
10.12.1998 18:01:35
2048
Prg
SAPLSCVU
17.09.2006 08:50:02
59392
Typ
T006A
28.08.1997 09:04:18
2048
Typ
OLE_PA
04.04.1995 16:02:19
2048
Typ
ARFCRDATA
12.07.2002 21:39:11
3072
Typ
SWCBCONT
14.02.1998 10:14:45
2048
Typ
OLE_VERBS
04.04.1995 16:02:20
1024
Prg
SAPLSDSD
17.09.2006 08:53:36
437248
Typ
DDSHIFACE
20.08.1998 10:51:59
2048
Typ
DFIES
15.01.1999 16:49:52
6144
Typ
DDSHFPROP
20.08.1998 10:51:57
2048
Typ
DDSHSELOPT
20.08.1998 10:52:01
2048
Prg
SAPLSDNT
18.12.2004 12:05:44
188416
Prg
SAPLSDIF
18.12.2004 13:03:59
256000
Typ
T006
29.07.1998 19:25:31
3072
Prg
SAPLSCV0
17.09.2006 08:50:22
99328
Typ
TCA01
10.03.1999 18:31:19
5120
Typ
TCA02
14.02.1998 12:40:44
2048
Typ
TCA35
06.07.1998 20:51:04
2048
Typ
QMAT
27.08.1999 18:14:19
5120
Typ
TQ32
10.07.1997 00:12:23
2048
Prg
SAPLXQPL
17.09.2006 09:30:13
28672
Typ
TCA44
29.07.1998 19:44:06
2048
Prg
SAPLQPAP
17.09.2006 09:30:13
295936
Prg
SAPMSSY0
17.09.2006 08:53:44
69632
Prg
SAPLSNR3
17.09.2006 08:53:36
48128
Typ
TNRO
18.12.2004 13:02:43
4096
Prg
SAPLQEEV
17.09.2006 09:27:48
216064
Typ
QAPP
15.04.1998 00:12:33
7168
Typ
TQSS
20.01.2000 10:08:08
3072
Prg
SAPLQMCF
17.09.2006 09:34:35
46080
Prg
SAPLCEI0
03.12.2006 09:44:54
1121280
Prg
SAPLCUEV
13.07.2002 02:21:41
11264
Typ
IBINCOM
01.06.1999 11:56:27
2048
Typ
IBINCONF
01.06.1999 11:56:27
2048
Typ
IBSTCONF
01.06.1999 11:56:28
1024
Prg
IF_EX_CEI0_INVLD_POSSIBLE=====
12.02.2005 20:53:18
4096
Prg
CL_EX_CEI0_INVLD_POSSIBLE=====
12.02.2005 20:52:40
10240
Prg
CL_EXIT_MASTER================
01.02.2000 09:29:10
10240
Typ
V_EXT_IMP
14.10.1999 22:16:55
2048
Prg
SAPLCUCB
17.09.2006 09:34:59
199680
Typ
TCUIBSPECIAL
15.11.2001 05:31:05
1024
Prg
CL_CBASE======================
13.02.2005 07:14:09
95232
Typ
T371G
29.04.1998 10:42:48
1024
Prg
SAPLIBCO
13.02.2005 05:49:04
305152
Prg
SAPLIBXX
13.07.2002 02:21:41
12288
Prg
SAPLIBIBF
13.02.2005 06:58:29
177152
Prg
SAPLIBINF
13.02.2005 06:58:30
452608
Prg
CL_IBASE_STRUC================
13.07.2002 02:21:39
141312
Prg
CL_IBASE_STRUC_BUF============
13.02.2005 01:44:37
120832
Prg
CL_IBASE_STRUC_STAT===========
13.07.2002 02:21:39
9216
Prg
CL_IBASE_STRUC_BUF_IBSTREF====
13.02.2005 01:44:37
61440
Typ
IBINVAL
14.05.1998 22:39:25
2048
Prg
SAPLIBCU
13.07.2002 02:21:41
14336
Prg
SAPLIBCUT
13.07.2002 02:21:41
14336
Typ
T371B
14.05.1998 22:58:43
1024
Prg
CL_IBASE_SERVICE==============
13.07.2002 02:21:39
17408
Prg
CL_IBASE_T371D_BUF============
13.07.2002 02:21:39
15360
Typ
T371D
27.08.1999 18:19:44
2048
Prg
CL_IBASE_R3_MATERIAL==========
17.09.2006 09:33:39
99328
Typ
MAKT
28.08.1997 08:52:19
2048
Typ
ICON
03.01.1996 15:34:02
3072
Prg
IF_EX_CM_BADI_VERSION=========
12.07.2002 23:55:25
4096
Prg
CL_EX_CM_BADI_VERSION=========
12.07.2002 23:54:25
11264
Prg
CL_DEF_IM_CM_BADI_VERSION=====
12.07.2002 23:54:24
8192
Prg
SAPLASTAT_TRIG
18.12.2004 12:15:52
12288
Typ
ASTAT_TYP2
10.11.1998 05:35:18
1024
Typ
ASTAT_TYP1
30.11.1998 15:54:16
1024
Prg
IF_CM_BASELINE================
13.02.2005 06:50:14
40960
Prg
IF_IBASE_IBOF_TREE_OBJECT=====
13.02.2005 05:59:51
10240
Prg
IF_IBASE_INSTALL==============
13.07.2002 02:21:40
4096
Prg
IF_IBASE_MATERIAL=============
13.07.2002 02:21:40
4096
Prg
IF_IBASE_OBJECT===============
13.07.2002 02:21:40
5120
Prg
SAPLBOMA
01.02.2000 14:54:24
13312Hi Sanjay,
This dump generally occurs when there are inconsistencies between the name of the fields in the fieldcatalog and the names of the fields in the internal table. Please post ur code.(Assuming that this dump has occured in a Z* program)
Edited by: Rajesh on Dec 29, 2007 2:40 PM
Maybe you are looking for
-
How do I use a push button digital trigger with my 6034E DAQ board?
I am only a Lab View toddler. I am currently using a push button, wired to PFIO/TRIG1 and DGND, with a anolog trigger. However noise is causing my program to be triggered. I was told that a digital trigger would help to reduce the random triggering.
-
My iphone 4s voice dictiation for text messages is not consistently working. I've had the phone since Thanksgiving and it always worked perfectly, but the last few weeks it's been hit or miss. Sometimes it works, sometimes it doesn't. Anyone else hav
-
Down payment for Stock Vendors
Hi, I need to create a down payment for stock vendors, If I create an invoicing plan but then I get this error saying "Invoicing plan not possible in case of GR-based invoice verification". My scenario is that do make down payments to Stock vendors b
-
Using EWS to work with mail items from a range derived from Get-Date
I am attempting to write a powershell script that uses EWS to move items from the prior month and create a folder named after that month to hold those items. I am finding that the search filter only likes the format if you use .NET system.DateTime a
-
Time Machine Exclude Items Not Working
So I just started using TM, or rather trying to use it. I have a pretty big HD to backup, and since 200GB of it is just a copy of one large folder on a server I wish to exclude it from backup. So I go into Time Machine and click the "Options" button,