Cxlib-5-0.dll error resurfacing on client machine

Hi All,
The below error is shown in one of a client machine after resolving it earlier sometime back.
As per solution given in the below thread it was carried out on that client machine few months back and got resolved.
But the same error has resurfaced again on that machine:
There has been no formatting done on that machine again nor client was uninstalled and re-installed. Could there be any reason for this issue?
A solution is available via the SAP (Crystal Reports) website -scn.sap.com/thread/3203841
Solution for 64 bit machines:
Copy C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win64_x64\cxlib-5-0.dll and cxlibw-5-0.dll
to
C:\windows\system32 and C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\cxlib-5-0.dll and cxlibw-5-0.dll to C:\windows\syswow64
Solution for 32 bit machines:
Copy C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\cxlib-5-0.dll and cxlibw-5-0.dll
to
C:\windows\system32
Regards,
Bharath

Hi,
It is an application error. Please check SAP note:
1836086 - The program can´t start because cxlib-5-0.dll is missing from your computer
Upgrade to 8.82 PL12 to fix this issue.
Thanks & Regards,
Nagarajan

Similar Messages

  • .dll access problem in client machine

    In my application we were used applet that applet loading .dll. that .dll we were used for device driver(used for foot switch controller) and we devolped web based application.This application working properly in server machine but not working in client machine
    the error is java.lang.UnSatisfiedLinkError :no .dll in java.libray.path
    now my question is ,i need to put .dll file in client side also jre library also? if i put into client jre lib it works
    is it need to copy .dll file to client side or its enough in server side

    Hi,
    You may check these threads:
    Internal Error (-1002)
    whats the solution for Internal error (-1003) occured [Message 131-183]
    Thanks,
    Gordon

  • Server 2008 R2 Terminal Server c0000005 and c0000006 errors with KERNELBASE.dll error in RDP sessions.

    We installed a new Server 2008 R2 server this spring. It is configured as a Terminal Server with 16 Wyse t10 thin clients connecting with RDP. We are a small resort so we run Springer Miller Host and SpaSoft. Ever since moving from PCs to the thin clients
    and TS we have been seeing SpaSoft randomly crash with KERNELBASE.dll errors and also a lot of c0000005 and c0000006 errors. Springer Miller support says its a Microsoft Networking issue so no help there. The company we worked with to install this has no clue
    so I hope to reach out to this community to solve this. I can also open support case with Microsoft Support but I am not sure if they will be of any help. Here are some examples of the errors:
    "Event 1000
    Faulting application name: SpaWin.exe, version: 3.4.0.0, time stamp: 0x2a425e19
    Faulting module name: KERNELBASE.dll, version: 6.1.7601.18409, time stamp: 0x53159a86
    Exception code: 0x0eedfade
    Fault offset: 0x0000c42d
    Faulting process id: 0x3718
    Faulting application start time: 0x01cf9ac7922487e9
    Faulting application path: \\spasoft\spaapps\TermServ\SpaWin.exe
    Faulting module path: C:\Windows\syswow64\KERNELBASE.dll
    Report Id: cfdcf9a9-06ba-11e4-a5af-000c298d9aa5"
    Also:
    "Faulting application name: VH.EXE, version: 18.80.430.0, time stamp: 0x3f73b447
    Faulting module name: VFP8R.DLL, version: 8.0.0.3117, time stamp: 0x3f73c232
    Exception code: 0xc0000006
    Fault offset: 0x0001d598
    Faulting process id: 0x2bc8
    Faulting application start time: 0x01cf99297ee1742f
    Faulting application path: J:\HOSTPLUS\fxp32\VH.EXE
    Faulting module path: J:\HOSTPLUS\fxp32\VFP8R.DLL
    Report Id: 5fbc65c4-055c-11e4-a5af-000c298d9aa5"
    And:
    "Faulting application name: SpaWin.exe, version: 3.4.0.0, time stamp: 0x2a425e19
    Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
    Exception code: 0xc0000005
    Fault offset: 0x00000000
    Faulting process id: 0x2aa0
    Faulting application start time: 0x01cf988e6770e619
    Faulting application path: \\spasoft\spaapps\TermServ\SpaWin.exe
    Faulting module path: unknown
    Report Id: 01029179-04b9-11e4-a5af-000c298d9aa5"
    There are no network specific errors in any of the logs. I am thinking that SpaSoft needs to be run as an administrator but I am not sure how to do that in this environment. We have disabled DEP for all but essential Windows processes. All of the firewall
    and AV has been completely disabled, and still getting these errors. Is there a way to run these applications as admin without the user actually being an admin? Should I go ahead and open a Microsoft support case? Thanks

    Hi,
    Thank you for posting in Windows Server Forum.
    Explanation
    The indicated program stopped unexpectedly. The message contains details on which program and module stopped. A matching event with Event ID 1001 might also appear in the event log. This matching event displays information about the specific error that occurred.
    User Action
    If an error report was generated for this error, you might be able to obtain more information about the error by sending the report to Microsoft for analysis.
    Yeah, you can open a support case with Microsoft as they will help and guide you for proper solution. You can go through
    this source article.
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • Dboraslib.dll - Error 126 : "The specified module could not be found."

    Hi,
    After installation XI 3.0 and adapters, the dispatcher(dispwork.exe) is failing to start in a ABAPJ2EE system (web AS 6.40).
    The dev_disp trace file shows the following error:
    Please do help to resolve this problem.
    trc file: "dev_disp", trc level: 1, release: "640"
    Mon Aug 09 12:14:43 2004
    kernel runs with dp version 124000(ext=101000) (@(#) DPLIB-INT-VERSION-124000-UC)
    length of sys_adm_ext is 524 bytes
    ERROR => DlLoadLib: LoadLibrary(dboraslib.dll) Error 126 [dlnt.c       237]
            Error 126 = "The specified module could not be found."
    systemid   560 (PC with Windows NT)
    relno      6400
    patchlevel 0
    patchno    1
    intno      0
    make:      multithreaded, Unicode
    pid        2908
    ***LOG Q00=> DpSapEnvInit, DPStart (00 2908) [dpxxdisp.c   1093]
         shared lib "dw_xml.dll" version 1 successfully loaded
         shared lib "dw_xtc.dll" version 1 successfully loaded
         shared lib "dw_stl.dll" version 1 successfully loaded
         shared lib "dw_gui.dll" version 1 successfully loaded
    Mon Aug 09 12:14:48 2004
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  3878]
    MtxInit: -2 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: JAVA is not active
    DpShMCreate: sizeof(wp_adm)          10528     (1316)
    DpShMCreate: sizeof(tm_adm)          2506872     (12472)
    DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    DpShMCreate: sizeof(comm_adm)          290000     (580)
    DpShMCreate: sizeof(vmc_adm)          0     (372)
    DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 06440040, size: 2919328)
    DpShMCreate: allocated sys_adm at 06440040
    DpShMCreate: allocated wp_adm at 06441B58
    DpShMCreate: allocated tm_adm_list at 06444478
    DpShMCreate: allocated tm_adm at 064444A0
    DpShMCreate: allocated wp_ca_adm at 066A8518
    DpShMCreate: allocated appc_ca_adm at 066AE2D8
    DpShMCreate: allocated comm_adm_list at 066B0218
    DpShMCreate: allocated comm_adm at 066B0230
    DpShMCreate: allocated vmc_adm_list at 066F6F00
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 066F6F28
    DpShMCreate: allocated wall_adm at 066F6F30
    MBUF state OFF
    Mon Aug 09 12:14:49 2004
    EmInit: MmSetImplementation( 2 ).
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation std
    <EsNT> Memory Reset enabled as NT default
    <EsNT> EsIUnamFileMapInit: Initialize the memory 614 MB
    <ES> 613 blocks reserved for free list.
    ES initialized.
    Mon Aug 09 12:14:52 2004
    J2EE server info
      start = TRUE
      state = STARTED
      pid = 3216
      argv[0] = C:\usr\sap\SXI\DVEBMGS00/j2ee/os_libs/jcontrol.exe
      argv[1] = C:\usr\sap\SXI\DVEBMGS00/j2ee/os_libs/jcontrol.exe
      argv[2] = pf=C:\usr\sap\SXI\SYS\profile\SXI_DVEBMGS00_cgnlpt036
      argv[3] = -DSAPSTART=1
      argv[4] = -DCONNECT_PORT=1352
      argv[5] = -DLISTEN_PORT=1353
      argv[6] = -DSAPSYSTEM=00
      argv[7] = -DSAPSYSTEMNAME=SXI
      argv[8] = -DSAPMYNAME=cgnlpt036_SXI_00
      argv[9] = -DSAPPROFILE=C:\usr\sap\SXI\SYS\profile\SXI_DVEBMGS00_cgnlpt036
      argv[10] = -DFRFC_FALLBACK=ON
      argv[11] = -DFRFC_FALLBACK_HOST=localhost
      start_lazy = 0
      start_control = SAP J2EE startup framework
    DpJ2eeStart: j2ee state = STARTED
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 2.0 2.0 3.1.1) [dpxxdisp.c   1455]
    ***LOG Q0K=> DpMsAttach, mscon ( cgnlpt036) [dpxxdisp.c   9701]
    Mon Aug 09 12:14:54 2004
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 6400, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1025]
    DpMsgAdmin: Set patchno for this platform to 1
    Release check o.K.
    Mon Aug 09 12:15:33 2004
    ERROR => W0 (pid 3224) died [dpxxdisp.c   12152]
    ERROR => W1 (pid 3232) died [dpxxdisp.c   12152]
    my types changed after wp death/restart 0xbf --> 0xbe
    ERROR => W2 (pid 3240) died [dpxxdisp.c   12152]
    my types changed after wp death/restart 0xbe --> 0xbc
    ERROR => W3 (pid 3248) died [dpxxdisp.c   12152]
    my types changed after wp death/restart 0xbc --> 0xb8
    ERROR => W4 (pid 3256) died [dpxxdisp.c   12152]
    ERROR => W5 (pid 3264) died [dpxxdisp.c   12152]
    my types changed after wp death/restart 0xb8 --> 0xb0
    ERROR => W6 (pid 3272) died [dpxxdisp.c   12152]
    my types changed after wp death/restart 0xb0 --> 0xa0
    ERROR => W7 (pid 3280) died [dpxxdisp.c   12152]
    my types changed after wp death/restart 0xa0 --> 0x80
    DP_FATAL_ERROR => DpWPCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    killing W0-3224 (SIGUSR2)
    ERROR => DpWpKill(3224, SIGUSR2) failed [dpxxtool.c   2464]
    killing W1-3232 (SIGUSR2)
    ERROR => DpWpKill(3232, SIGUSR2) failed [dpxxtool.c   2464]
    killing W2-3240 (SIGUSR2)
    ERROR => DpWpKill(3240, SIGUSR2) failed [dpxxtool.c   2464]
    killing W3-3248 (SIGUSR2)
    ERROR => DpWpKill(3248, SIGUSR2) failed [dpxxtool.c   2464]
    killing W4-3256 (SIGUSR2)
    ERROR => DpWpKill(3256, SIGUSR2) failed [dpxxtool.c   2464]
    killing W5-3264 (SIGUSR2)
    ERROR => DpWpKill(3264, SIGUSR2) failed [dpxxtool.c   2464]
    killing W6-3272 (SIGUSR2)
    ERROR => DpWpKill(3272, SIGUSR2) failed [dpxxtool.c   2464]
    killing W7-3280 (SIGUSR2)
    ERROR => DpWpKill(3280, SIGUSR2) failed [dpxxtool.c   2464]
    NiWait: sleep (10000 msecs) ...
    NiISelect: timeout 10000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:43 2004
    NiISelect: TIMEOUT occured (10000 ms)
    dump system status
    Workprocess Table (long)               Mon Aug 09 06:45:43 2004
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program  Cl  User         Action                    Table
    0 DIA     3224 Ended         no      1   0             0                                                             
    1 DIA     3232 Ended         no      1   0             0                                                             
    2 UPD     3240 Ended         no      1   0             0                                                             
    3 ENQ     3248 Ended         no      1   0             0                                                             
    4 BTC     3256 Ended         no      1   0             0                                                             
    5 BTC     3264 Ended         no      1   0             0                                                             
    6 SPO     3272 Ended         no      1   0             0                                                             
    7 UP2     3280 Ended         no      1   0             0                                                             
    Dispatcher Queue Statistics               Mon Aug 09 06:45:43 2004
    ===========================
    --------++++--
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++--
    +
    NOWP
    0
    3
    2000
    10
    10
    --------++++--
    +
    DIA
    5
    5
    2000
    5
    0
    --------++++--
    +
    UPD
    0
    0
    2000
    0
    0
    --------++++--
    +
    ENQ
    0
    0
    2000
    0
    0
    --------++++--
    +
    BTC
    0
    0
    2000
    0
    0
    --------++++--
    +
    SPO
    0
    0
    2000
    0
    0
    --------++++--
    +
    UP2
    0
    0
    2000
    0
    0
    --------++++--
    +
    max_rq_id          13
    wake_evt_udp_now     0
    wake events           total     9,  udp     6 ( 66%),  shm     3 ( 33%)
    since last update     total     9,  udp     6 ( 66%),  shm     3 ( 33%)
    Dump of tm_adm structure:               Mon Aug 09 06:45:43 2004
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    Workprocess Comm. Area Blocks               Mon Aug 09 06:45:43 2004
    =============================
    Slots: 300, Used: 1, Max: 0
    --------++--
    +
    id
    owner
    pid
    eyecatcher
    --------++--
    +
    0
    DISPATCHER
    -1
    WPCAAD000
    NiWait: sleep (5000 msecs) ...
    NiISelect: timeout 5000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:48 2004
    NiISelect: TIMEOUT occured (5000 ms)
    Shutdown server ...
    DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3216)
    killing process (3216) (SOFT_KILL)
    DpIJ2eeShutdown: j2ee state = SHUTDOWN
    NiSelClear: removed hdl 3 from selectset
    DpDelSocketInfo: del info for socket 3 (type=7)
    NiBufClose: clear extensions for hdl 3
    NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
    NiICloseHandle: shutdown and close hdl 3 / socket 456
    NiSelClear: removed hdl 4 from selectset
    DpDelSocketInfo: del info for socket 4 (type=9)
    NiBufClose: clear extensions for hdl 4
    NiBufSetStat: bufstat of hdl 4 changed from OK to OFF
    NiICloseHandle: shutdown and close hdl 4 / socket 448
    DpModState: buffer in state MBUF_PREPARED
    NiBufSend starting
    NiIWrite: write 110, 1 packs, MESG_IO, hdl 5, data complete
    MsINiWrite: sent 110 bytes
    MsIModState: change state to SHUTDOWN
    DpModState: change server state from STARTING to SHUTDOWN
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    Stop work processes...
    Stop gateway
    killing process (3172) (SOFT_KILL)
    Stop icman
    killing process (3196) (SOFT_KILL)
    Terminate gui connections
    [DpProcDied] Process lives  (PID:3172  HANDLE:472)
    waiting for termination of gateway
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:49 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process died  (PID:3172  HANDLE:472)
    [DpProcDied] Process died  (PID:3196  HANDLE:464)
    DpHalt: cancel all lcom connections
    MPI CancelAll 2 -> 0
    MPI DeleteAll 2 -> 0
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:50 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:51 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:52 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:53 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:54 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:56 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:57 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:58 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:15:59 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:16:00 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:16:01 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:16:02 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:16:03 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:16:04 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:16:05 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process lives  (PID:3216  HANDLE:440)
    waiting for termination of J2EE server
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=489
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Aug 09 12:16:06 2004
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process died  (PID:3216  HANDLE:440)
    NiIMyHostName: hostname = 'cgnlpt036'
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
    DpConvertRequest: net size = 163 bytes
    NiBufSend starting
    NiIWrite: write 562, 1 packs, MESG_IO, hdl 5, data complete
    MsINiWrite: sent 562 bytes
    send msg (len 110+452) to name          -, type 4, key -
    detach from message server
    ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   9927]
    NiBufSend starting
    NiIWrite: write 110, 1 packs, MESG_IO, hdl 5, data complete
    MsINiWrite: sent 110 bytes
    MsIDetach: send logout to msg_server
    MsIDetach: call exit function
    DpMsShutdownHook called
    NiSelClear: removed hdl 5 from selectset
    MBUF state OFF
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
    LOCK WP ca_blk 1
    make DISP owner of wp_ca_blk 1
    DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
    MBUF component DOWN
    NiBufClose: clear extensions for hdl 5
    NiBufSetStat: bufstat of hdl 5 changed from OK to OFF
    NiICloseHandle: shutdown and close hdl 5 / socket 368
    MsIDetach: detach MS-system
    EsCleanup ....
    ***LOG Q05=> DpHalt, DPStop ( 2908) [dpxxdisp.c   8460]
    Good Bye .....

    Hi,
    Thanks for the reply.
    dboraslib.dll is properly installed - I checked the registry and physical location of the file.
    The problem was : Environment variable "Path" not being set properly for the "oracle jre".
    Solution:
    After setting the path, the dispatcher started to run properly without any problems.
    Path=<Drive>\oracle\ora92\bin;<Drive>\Program files\Oracle\jre\1.3.1\bin; <Drive>\Program files\Oracle\jre\1.1.8\bin
    FYI - We are using WIN2K with SP4 and oracle DB 9.2
    Regards,
    Sridhar

  • How to install and register CrystalDecisions.ReportAppServer.Controllers.dll on client machine

    Hi All,
    I have a windows application developed in visual studio 2010 and i have installed Crystal Report CRforVS_13_4 in my development machine. now when i install and try to run the crystal report i gives me below error :
    System.Runtime.InteropServices.COMException (0x80040154): Class not registered - ICRReportPrinterPageRange   at CrystalDecisions.ReportAppServer.Controllers.ISCRPrintReportOptions.AddPrinterPageRange(Int32 rangeStart, Int32 rangeEnd)   at TestApplicationClient.Reporting.PrintReport(String PrinterName, Int32 Copies)   at TestApplicationClient.frmReport.CreateReport()
    i also installed Crystal Report runtime at client side, but the error is still there, and i am also unable to find rystalDecisions.ReportAppServer.Controllers.dll at client machine at "C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet"
    please help me in solving this issue.

    PLEASE search first, lots of info and posts on how to deploy CR runtime.
    Don

  • ATMLIB.dll error on opening a complex PDF

    I have designed several forms with Javascript code sections for auto-date completion etc.
    In the last 2-3 weeks I cannot open any of them on my development machine.
    Here is a screenshot of the error message.
    http://i.imgur.com/LejE4oO.jpg
    The program then freezes and has to be shut down.
    The error says "not designed to run on Windows". That does not make sense to me.
    I am running Windows 7 Ultimate 64-BIT.
    I have done the following:
    1) Uninstalled ACROBAT X PRO
          Rebooted
          Used Adobe's clean tool
    2) Reinstalled
    ERROR still exists
    1) Uninstalled ACROBAT X
    2) Installed every Acrobat X update up to the latest version in correct sequence
    3) Reboot
    ERROR still exists
    I have now gotten to the point where my workflow has come to a complete halt. I take my work to another compute (client) that has Acrobat Reader and the "complex" files open just fine.
    Its just my dev machine that is FUBAR.
    I have been through like 10 reinstalls with no success.
    My only solution now may be to ditch Adobe and seek a third party PDF creation and editing tool for work which is far from ideal.
    I am NOT reinstalling Windows 7 because I am in no mood to have to reinstall every piece of software plus risk breaking my VB.net coding tools.
    Has anyone seen an ATMLIB.dll error on opening complex documents?
    This is not AMTLIB.dll (I don't know what that is) but ATMLIB.dll.
    ATM appears to stand for Adobe Type Manager but I cannot seem to figure out why this has occured.

    I was able to fix this, and I posted about it on another forum post here
    I had this issue ("Bad Image: C:\Windows\system32\ATMLIB.dll is either not designed to run on Windows or it contains an error") with Adobe Reader X (10.1.12). I tried repairing, and then tried uninstalling and upgrading to Adobe Reader XI (11.0.9), but still had the same trouble. I compared the atmlib.dll files in both directories and noticed that the file in C:\Windows\SysWOW64 did not appear to have any file meta data (giving the appearance that it was corrupted), whereas the file in C:\Windows\system32 reflected a file version 5.1.2.238 and product version "5.1 Build 238". Now, it appears based on being installed to "C:\Program Files (x86)" that the version of Adobe Reader I was using was 32-bit. So, this tells me that while the error references the C:\Windows\system32 file path, it is likely actually the file in C:\Windows\SysWOW64 that is the problem (Windows-on-Windows emulation for 32-bit applications, 32-bit libraries actually reside in C:\Windows\SysWOW64, not C:\Windows\system32). I found the same file in C:\Windows\SysWOW64 with the same product and file version on another 64-bit Windows 7 workstation, and simply copied it to C:\Windows\SysWOW64 on the affected workstation, and that resolved the issue.
    NOTE: To overwrite the file, I had to change file ownership to Administrators security group, otherwise it was immutable.

  • SQResus.dll Error when adding a DSN

    Have Oracle 8.i client installed on Windows NT 4.0 server and get the SQResus.dll error and the posts a 1114 Error. Any help would be great.

    Have Oracle 8.i client installed on Windows NT 4.0 server and get the SQResus.dll error and the posts a 1114 Error. Any help would be great.

  • ERROR = DlLoadLib: LoadLibrary(dbsdbslib.dll) Error 126

    Hi All,
    I'm facing a problem while starting ABAP NW sneak preview system. disp+work.exe is stopped. when I see the trace log. it says the following. Please help.
    trc file: "dev_disp", trc level: 1, release: "700"
    Fri Jan 26 07:31:37 2007
    ERROR => DlLoadLib: LoadLibrary(dbsdbslib.dll) Error 126 [dlnt.c       237]
            Error 126 = "The specified module could not be found."
    sysno      00
    sid        NSP
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    68
    intno      20050900
    make:      multithreaded, ASCII, optimized
    pid        1784
    kernel runs with dp version 216(ext=109) (@(#) DPLIB-INT-VERSION-216)
    length of sys_adm_ext is 360 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (00 1784) [dpxxdisp.c   1237]
         shared lib "dw_xml.dll" version 68 successfully loaded
         shared lib "dw_xtc.dll" version 68 successfully loaded
         shared lib "dw_stl.dll" version 68 successfully loaded
         shared lib "dw_gui.dll" version 68 successfully loaded
         shared lib "dw_mdm.dll" version 68 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3900
    Fri Jan 26 07:31:42 2007
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5272]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >VIJESH_NSP_00                           <
    DpShMCreate: sizeof(wp_adm)          6160     (880)
    DpShMCreate: sizeof(tm_adm)          3397704     (16904)
    DpShMCreate: sizeof(wp_ca_adm)          1200     (60)
    DpShMCreate: sizeof(appc_ca_adm)     1200     (60)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
    DpShMCreate: sizeof(comm_adm)          528048     (1048)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1196)
    DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 058D0040, size: 3997896)
    DpShMCreate: allocated sys_adm at 058D0040
    DpShMCreate: allocated wp_adm at 058D19F0
    DpShMCreate: allocated tm_adm_list at 058D3200
    DpShMCreate: allocated tm_adm at 058D3230
    DpShMCreate: allocated wp_ca_adm at 05C10A78
    DpShMCreate: allocated appc_ca_adm at 05C10F28
    DpShMCreate: allocated comm_adm at 05C113D8
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 05C92288
    DpShMCreate: allocated gw_adm at 05C922C8
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 05C922F8
    DpShMCreate: allocated wall_adm at 05C92300
    MBUF state OFF
    Fri Jan 26 07:31:43 2007
    ERROR => ztta/cua_area is 180000. [sapinit.c    963]
    ERROR => ztta/cua_area adjusted to 250000. [sapinit.c    967]
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation flat
    <EsNT> Memory Reset disabled as NT default
    <ES> 127 blocks reserved for free list.
    ES initialized.
    rdisp/http_min_wait_dia_wp : 1 -> 1

    Hi,
    I am facing the same problem. The netweaver 2004s installation was successful without any problems. But the dispatcher stopps with the same error message as you had. Could you resolve the problem?
    Thanks for your response in advance.
    Shahram

  • Query Notification fail with unhandled exception (orageneric11.dll) error

    Please help
    trying to run "Continuous Query Notification Example" from
    http://docs.oracle.com/cd/B28359_01/appdev.111/b28395/oci10new.htm
    (after some modifications example launchs and begin "waiting for Notifications")
    then i make changes in oracle table "test_table" which "myCallback" listens.
    After commit changes in table programm get notify about this changes and call function "myCallback"
    Then myCallback call function "processQueryChanges" which
    fail programm with exception in debug:
    "unhandled exception in mytest.exe (orageneric11.dll): 0x0000005 Access Violation"
    void processQueryChanges(....)
    for (i=0; i < num_queries; i++)
    //!!!!!fail in this string!!!!!
    checker(errhp, OCICollGetElem(envhp,
    errhp, (OCIColl *) query_changes,
    i, &exist, &query_descp, &elemind));
    I found version of the decision
    but it doesn't work
    decision text:
    To resolve this Oracle issue add the following entry to your SQLNET.ORA file.
    # This file is actually generated by netca. But if customers choose to
    # install "Software Only", this file wont exist and without the native
    # authentication, they will not be able to connect to the database on NT.
    SQLNET.AUTHENTICATION_SERVICES = (NTS)
    DIAG_ADR_ENABLED=OFF
    DIAG_SIGHANDLER_ENABLED=FALSE
    DIAG_DDE_ENABLED=FALSE
    visual studio 6.0 sp6, oracle client 11.1.0
    Edited by: 958639 on 12.09.2012 6:00

    Hi Efstratios,
    Yes, I have imported all the transports and all of they are success. I am able to use SAP authentication and able to create connection and retrive all InfoCubes and Quries also.  Error is only when i select the query to create universe.
    As i understand from the erros shown is , in the server some graphis card or driver is missing.
    Moreever, I am looking for loging into the Desinger using SAP authentication from Client machine.  For SAP authentication, i should install Integration Kit in client machine.( corect me if i am wrong ). To install Integration KiT , it is asking Crystol report server in desktop before integration kit.
    Does it require ?
    Regards,
    Suresh

  • Oraclient9i.dll error in multi threaded delphi server application

    I created a multi threaded server application in delphi using oracle9i and indy server components. When I run my application, I am getting an error "oraclient9i.dll" error when executing my SQL statements. I have check communication between my server application and the client application without using oracle and its working fine, its only when I started executing SQL statements when I got this error.
    Can anybody help me with this problem or point me to the right direction on how to resolve this issue.
    thanks

    > I have tried what you suggested. I have created a
    seperate TOracleSession on each thread that I create
    on the OnConnect event however I am having Problems
    using the oraclesession created on the OnExecute
    event. Somehow it is still executing the SQL that I
    have created on the main form where I first opened an
    oraclesession component created on the main form.
    It sounds then like the TOracleSession object in the thread is a copy of the one in the main thread/form.
    > Do you think that It would work if I create an
    instance of the TOracleDatasets and TOracleQuery on
    the OnExecute event and also at the same time create
    my TOracleSession on this event and continue
    processing the data receive from the client server.
    I've never used the Indy components for threading. The default TThread class worked just fine for me.
    What I used to do is define the session and database objects as privates in my new thread class (let's call it TThreadSQL) - which was subclassed from TThread.
    The constructor of this new TThreadSQL class did the following (writing here purely from memory - have not done Delphi for some time now): constructor TThreadSQL.Create( TNSalias, username, password : string );
    // constructor is called with the Oracle session connection details
    begin
      inherited Create; // call the parent class constructor
      CreateOracleSession; // call own private method to create an Oracle connection
    end;
    The CreateOracleSession method would then:
    - create a BDE Session (TSession) object
    - create a BDE Database (TDatabase) object, using the BDE Oracle native driver and an Oracle TNS alias plus username and password for connection
    The destructor would close the connection. The Execute method which is used to fire up the thread, would use a TQuery object (or whatever) to execute a SQL using it owns connection.

  • OLESVR32.DLL Error

    Hi,
    We are using inhouse developed package (forms 5 and DB 9i). For the past one week we are getting the following error when we open the package. OLESVR32.DLL Error... When we accept ok, then we are able to login the package. Previously it used to come in some clients systems. Now all the clients are facing this problem. I dont know whether this is a database problem or not.. My OS is Windows 2000 Server.
    Can anyone help me ?

    Duplicate thread
    OLESVR32.DLL Error
    Though I don't have much informaton about forms but It appears that the said file is corrupted or may be some virus has infected this specific file.
    Aman....

  • Error while opening a report in FRstudio client machine.

    Hi,I'm getting below error while opening a report in FRstudio client machine. please help me if any of you resolved this issue earlier.
    client laptop: 64bit windows7
    hyperion version: 11.1.2.2
    error msg:
    "HARSnapin Initialize() Error -2147467259 - ; nested exception is:
         java.rmi.UnmarshalException: error unmarshalling return; nested exception is:
         java.io.InvalidClassException: com.hyperion.reporting.graphics.GridObject; local class incompatible: stream classdesc serialVersionUID = 5432192847655595077, local class serialVersionUID = -5245705824007679661"
    thanks

    I've seen umarshalling error when there is a difference between the client and server version. Is there a patch applied? I would recommend to uninstall the existing one and install if from Workspace. (this will ensure that you've the correct client version)
    Regards
    Celvin
    http://www.orahyplabs.com

  • Previewing Data in EAS Console on client machine throws an error.

    When I preview data in EAS console(version 11.1.1.4) on a client workstation I get a "Cannot sign on to domain. Error initializing the ORB.java.io.FileNotFoundException: domain.db (Access is denied)" error. Now if I Use the URL for Admin Console on the same client machine am able to preview the data fine. Also when I preview data on the client installed on the server am able to preview data fine. Just that when I use the Admin console client installed on a workstation I get that error. Any suggestions?
    Thanks,
    Ted.
    Edited by: Teddd on Mar 26, 2013 2:51 PM

    Ok I am using 11.1.1.4 EAS console. When I kick off the EAS console installed on the client machine I have observed the javaw.exe process which kicks off. And when I right click and do "open file location" on it it takes me to the E:\Hyperion\common\JRE\Sun\1.5.0\bin\javaw.exe which tells me it is using the java version which came with the product. But I still am having issues like expanding outlines(not issues, I just cant expand the outline dimensions to view members) and previewing data. On the other hand when I come through the URL the javaw.exe which kicks off is in the folder "C:\Program Files\JavaSoft\jre\1.6.0_11\bin\javaw.exe" which tells me it is using the java installed on the client workstation. And this 1.6 version one works just fine without any issues whatsoever. So in my case it is the supported version which is not working and the not supported one works without any issues. Please suggest guys, this is driving me nuts and I have no idea why our developers donot want to use the URL and want to use only the console installed on their machines. Even with a workaround available there should be a reason as to why it is happening and why it is not working.
    Thanks,
    Ted.
    Edited by: Teddd on Mar 28, 2013 3:20 PM

  • Guide to overcome hal.dll error - disk error & other errors.

    Okay to start off with - guide for installing bootcamp.
    DISCLAIMER:
    I take no responsibility at all - whatsoever for any damage the following steps cause to anything. If you follow this guide and then are annoyed at me in any way - don't be - you followed these steps knowing they could be dangerous to your hard drive / computer / sanity / etc. That said - good luck & these steps should work for everyone.
    requirements: XP SP2 CD & a copy of parallels would be useful. Also a non-apple usb keyboard for step 1 if the apple one doesn't work during xp bootup.
    1. First try the usual bootcamp assistant method. Insert the xp disk, in the setup make sure you format the drive to NTFS (not quick). If you don't get this option - skip to step 3.
    2. Reboot and hopefully everything will go without a hitch. If it doesn't and you get a hal.dll error or any other kind of error go on to the next step.
    3. Boot up mac os x. Install parallels desktop.
    4. Insert your windows xp sp2 cd.
    5. Create a new virtual machine using a virtual hard drive saved in your documents folder somewhere.
    6. Configure it so that the bootcamp drive is added as an extra secondary drive in the virtual machine. (Little plus button down at the bottom).
    7. Install XP onto the virtual machine - don't activate or anything, just get to the desktop stage as fast as possible.
    8. Parallels will have already asked for your password to dismount the boot camp drive.
    9. Double click my computer in the virtual machine, then hold down ctrl+shift and click on the BOOTCAMP partition in the my computer window.
    10. Click format.
    11. Select NTFS as file format, check enable compression - do not check quick format.
    12. Wait till its finished and then power down the virtual machine.
    ------- The following steps are taken from http://communities.vmware.com/thread/114529 and were written by MandarMS from the vmware forums. I have edited the guide a little - (you'll see where). Thanks and all credit to MandarMS.----
    13. (James: Close parallels)
    14. Quit all applications in Host Mac OS X
    15. Open Terminal utility from Macintosh HD : Applications : Utilities folder.
    16. Key-in the following command
    $ sudo fdisk /dev/rdisk0
    17. Preferably take the screenshot of the output or Note down the output (for restoring MBR).
    18. Key-in the following command
    $ sudo fdisk -e /dev/rdisk0
    setpid 3
    Choose 07 (as the partition type)
    write
    Y
    Restart your Mac System
    (James: EDIT - BELOW IS AN EXAMPLE OF THE OUTPUT OF THE PROGRAM IF YOU ARE UNSURE OF WHAT TO TYPE IN WHERE - This confused me at first but really helped in the end - James)
    For more details please check the example shown below:
    $ sudo fdisk -e /dev/rdisk0 (this will help to change the MBR)
    $ fdisk: could not open MBR file /usr/standalone/i386/boot0: No such file or directory
    Enter 'help' for information
    fdisk: 1> setpid 3 (Enter “setpid 3” press enter key)
    Starting Ending
    #: id cyl hd sec - cyl hd sec start - size
    *3: 0B 1023 254 63 - 1023 254 63 1127792680 - 337356448 Win95 FAT32L
    Partition id ('0' to disable) 0 - FF: [C] (? for help) 07 (Enter 07 Partition table)
    fdisk:*1> write (enter “write” press enter key, This will change the MBR)
    Device could not be accessed exclusively.
    A reboot will be needed for changes to take effect. OK? [n] Y (Press Y to modify changes)
    Writing MBR at offset 0.
    $ fdisk: 1> exit (enter “exit”, press enter key)
    19. Restart your Mac System
    ------ Back to me again.
    20. Welcome back - your drives have just been fixed. Reboot again and insert the windows xp sp2 cd. Hold down option at startup and boot from the cd.
    21. Go through the setup again - this time don't do anything to the drives when it asks you to format.
    22. wait...
    23. It'll reboot......
    24. It'll install..... if it doesn't - skip to step 26
    25. Welcome to windows, install your drivers and reboot a couple more times. You're good.
    26. (it didn't work... you got the hal.dll error or something similar) Boot up mac os x again and launch parallels.
    27. Start up the virtual machine - open up BOOTCAMP in my computer.
    28. Click view - folder options
    29. View types > make sure you can see hidden files and folders, view system files and etc.
    30. Right click boot.ini and click properties
    31. Uncheck read-only.
    32. Click okay - open boot.ini in notepad.
    33. If you're on a mac with 2 partitions: 1 mac hd, 1 bootcamp, delete everything in the boot.ini file and copy and paste the following into it:
    \[boot loader]
    timeout=30
    default=multi(0)disk(0)rdisk(0)partition(3)\WINDOWS
    \[operating systems]
    multi(0)disk(0)rdisk(0)partition(3)\WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect
    Obviously change the name to suit. Save it and reboot - you should be good to go now.

    Hi. Your bootcamp drive should be drive C. It shouldn't matter what drive letter it is really, you make the virtual machine disk as a virtual disk saved in your documents folder and hook it in to use your physical bootcamp drive.
    Ensure you've typed in the correct command and correct password. Press enter after you type in the password. You won't see it as you type it in, and you may need to wait some time afterwards before you'll see the next prompt. Leave it 2 minutes.
    Sorry I've been abroad.. hope you have it worked out by now anyway mate.

  • NI 5660 Driver DLL Errors when using Teststand 2010 and LabVIEW Run-Time Engine 2010

    This problem seems similar to the post "Resource not found error in executable on developmen​t machine." but I didn't want to repost under that thread because I only happened upon it by chance and none of my searches brought me there... so I made a more descriptive Subject.
    I am working on a system that uses a PXI Chassis with a NI 5600 Downconverter and a NI 5620 high speed digitizer, among other PXI Cards. 
    I inherited working code written in LabVIEW 2010, running with the LabVIEW Run-Time Engine 2010.  The code was using a custom executive and my task was to rewrite the test using TestStand 2010.  I reused the majority of the old code.  The old code used NI-5660 to control the 5600 and 5620.  When I run my sequence using the LV Development System and TestStand, it runs without any issues.  When I change the adapter over to LabVIEW Run-Time Engine 2010, all of my NI5660 VIs become broken due to DLL issues.  It warns that the nipxi5600u​.dll was not initialized correctly.  Many of the errors are associated with the NI Tuner and NI Scope. After this LabVIEW will crash randomly, and the seqeunce will not work in TestStand even when back with the LV Development Adapter.  The only way to recover after this is to restart the computer - TestStand automatically reverts back to the development system, the VIs are no longer broken and the sequence works again. 
    I have all of my VIs associated with a project. After reading a little bit about DLLs and TestStand, I found all of the DLLs in the dependencies section of my project and added them to my TestStand workspace.  I also used Dependency Walker to track down the problems with the nipxi5600u​.dll, the 2 DLL files that it said were not found already existed in the same folder as the original DLL (C:\Windows\System32).  I have also performed a Mass Compile to make sure everything was running in LV 2010.  If I skip the steps involving the 5660, my entire sequence runs fine. 
    The previous code was running with the LabVIEW Run-Time Engine without any issues.  Is there just a step I am missing?  Has anyone seen anything like this before?  I can send screenshots of errors to provide more detail if necessary. 

    I have tried some more things and still can't get it to work.  I have added the VIs mentioned in the Notes On Creating Modulation Executables KB both to the TestStand workspace and the LabVIEW project holding all of my VIs.  This did not change the results. 
    When I try to run my sequence, The first error I get is shown in Error 1445.bmp.  This happens when I try to use the NI 5660 initialize.vi.  If I click ignore, the next error I see is shown in Error -20551.bmp.  When I try to open the VI to look at it, I get the 2 DLL errors shown in Error loading nipxi5600u.bmp and Error loading nidaq32.bmp.  When I close TestStand, I get the error LabVIEW Fatal Error.bmp. 
    Attachments:
    Error1445.JPG ‏164 KB
    Error -20551.JPG ‏174 KB
    Error loading nipxi5600u.JPG ‏9 KB

Maybe you are looking for

  • How do I move my iTunes Library to an external drive and retain everything?

    I'm sure this is a common [stupid] question, but I couldn't find a clear answer and I want to be sure I'm doing it correctly. To clarify; I want to move/relocate my iTunes Library folder to an external drive (FW800 two-disk RAID1) to free up my syste

  • Form save problem - lose data after first save

    Hi, I have used Reader Extensions to permit Adobe Reader to fill in and save a form but find that after one save the rights are lost. Can you tell me what limits rights? Are there features of a form that may result in the rights being removed after a

  • Session not working

    An user if logged-in one machine will not be allowed to logged-in in another machine during that period of time. I tried using session but fails, as session is for a particular one only. What should i use? PLease help.

  • How to delete a client

    Hi, I have a client 004, and SAP* and PASS is not working or i dont remmber the password. Now we need to delete it. Please tell me how to delete a client by logedon through another client (003). Thanks Usman Rana

  • Post Installation and development

    Hi , The basis guys have told me PI ghas got installed. As PI consultant can u tell me what I should be checking?..Also what will be the first s/w component i should import from SLD?... Thank You in Advance