Cyber Intelligence Sharing and Protection Act

Whether or not you may approve: House and Senate are deciding on YOUR phone and computes PRIVACY.
See: Cyber Intelligence Sharing and Protection Act - Its always innocuous at first then PUFF! All gone.
Do you want some agent scrutinizing your **bleep** snapsots only to find yourself in jail?
A US Empire is coming if you do not voice opposition to tyranny now. Afterward you'll only wish you had spokne up when you had the chance. Verizon agreed to the program. Tell Verizon NO - you do not agree. Find another service if they bow to the whim and will that best suits them.

I've recently read that BT allegedly colluded with ACS:Law in the form of assisting in the drafting of the court submission for the IP addresses it received. To me, this shows little more that utter contempt for those innocent customers who would eventually be accused of copyright infringement.
I also read that BT were to be financially compensated for this, showing complicity in effectively strong-arming suspected file sharers with bullyboy tactics, regardless of whether they were or not... I'm utterly appalled.
My view is generally "don't believe anything you read"
I also read (wikipedia) that the company in question is a one-person solicitor company, and their solicitor is being investigated for the third time by the Solicitors Disciplinary Tribunal. I don't think that BT with millions of customers would collude with any company in the way you say, as they have better things to do and have more to lose by losing customers than any financial compensation you mention by a small firm..
Also, the bbc article clearly mentioned that the information was only given for customers for whom a court order was presented ordering them to do so, not willy-nilly because they asked nicely. How the company got the p2p info in the first place and what happened at the court I dont know, but I cannot expect BT , or any other ISP, not to give the information when someone has a court order..

Similar Messages

What is the best malwear detection and protection for use on a Mac?

What is the best malwear detection and protection for use on a Mac?

Mac users often ask whether they should install "anti-virus" software. The answer usually given on ASC is "no." The answer is right, but it may give the wrong impression that there is no threat from what are loosely called "viruses." There is a threat, and you need to educate yourself about it.
1. This is a comment on what you should—and should not—do to protect yourself from malicious software ("malware") that circulates on the Internet and gets onto a computer as an unintended consequence of the user's actions. It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the computer, or who has been able to log in to it remotely. That threat is in a different category, and there's no easy way to defend against it.
The comment is long because the issue is complex. The key points are in sections 5, 6, and 10.
OS X now implements three layers of built-in protection specifically against malware, not counting runtime protections such as execute disable, sandboxing, system library randomization, and address space layout randomization that may also guard against other kinds of exploits.
2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files, and to block insecure web plugins. This feature is transparent to the user. Internally Apple calls it "XProtect."
The malware recognition database used by XProtect is automatically updated; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
The following caveats apply to XProtect:
☞ It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets.
☞ It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
As new versions of OS X are released, it's not clear whether Apple will indefinitely continue to maintain the XProtect database of older versions such as 10.6. The security of obsolete system versions may eventually be degraded. Security updates to the code of obsolete systems will stop being released at some point, and that may leave them open to other kinds of attack besides malware.
3. Starting with OS X 10.7.5, there has been a second layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't necessarily been tested by Apple, but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. That may not mean much if the developer lives in a country with a weak legal system (see below.)
Gatekeeper doesn't depend on a database of known malware. It has, however, the same limitations as XProtect, and in addition the following:
☞ It can easily be disabled or overridden by the user.
☞ A malware attacker could get control of a code-signing certificate under false pretenses, or could simply ignore the consequences of distributing codesigned malware.
☞ An App Store developer could find a way to bypass Apple's oversight, or the oversight could fail due to human error.
Apple has so far failed to revoke the codesigning certificates of some known abusers, thereby diluting the value of Gatekeeper and the Developer ID program. These failures don't involve App Store products, however.
For the reasons given, App Store products, and—to a lesser extent—other applications recognized by Gatekeeper as signed, are safer than others, but they can't be considered absolutely safe. "Sandboxed" applications may prompt for access to private data, such as your contacts, or for access to the network. Think before granting that access. Sandbox security is based on user input. Never click through any request for authorization without thinking.
4. Starting with OS X 10.8.3, a third layer of protection has been added: a "Malware Removal Tool" (MRT). MRT runs automatically in the background when you update the OS. It checks for, and removes, malware that may have evaded the other protections via a Java exploit (see below.) MRT also runs when you install or update the Apple-supplied Java runtime (but not the Oracle runtime.) Like XProtect, MRT is effective against known threats, but not against unknown ones. It notifies you if it finds malware, but otherwise there's no user interface to MRT.
5. The built-in security features of OS X reduce the risk of malware attack, but they are not, and never will be, complete protection. Malware is foremost a problem of human behavior, and no technological fix alone is going to solve it. Trusting software to protect you will only make you more vulnerable.
The best defense is always going to be your own intelligence. With the possible exception of Java exploits, all known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "Trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore amounts to a battle of wits between you and Internet criminals. If you're better informed than they think you are, you'll win. That means, in practice, that you always stay within a safe harbor of computing practices. How do you know when you're leaving the safe harbor? Below are some warning signs of danger.
Software from an untrustworthy source
☞ Software of any kind is distributed via BitTorrent, or Usenet, or on a website that also distributes pirated music or movies.
☞ Software with a corporate brand, such as Adobe Flash Player, doesn't come directly from the developer’s website. Do not trust an alert from any website to update Flash, or your browser, or any other software.
☞ Rogue websites such as Softonic, Soft32, and CNET Download distribute free applications that have been packaged in a superfluous "installer."
☞ The software is advertised by means of spam or intrusive web ads. Any ad, on any site, that includes a direct link to a download should be ignored.
Software that is plainly illegal or does something illegal
☞ High-priced commercial software such as Photoshop is "cracked" or "free."
☞ An application helps you to infringe copyright, for instance by circumventing the copy protection on commercial software, or saving streamed media for reuse without permission. All "YouTube downloaders" are in this category, though not all are necessarily malicious.
Conditional or unsolicited offers from strangers
☞ A telephone caller or a web page tells you that you have a “virus” and offers to help you remove it. (Some reputable websites did legitimately warn visitors who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
☞ A web site offers free content such as video or music, but to use it you must install a “codec,” “plug-in,” "player," "downloader," "extractor," or “certificate” that comes from that same site, or an unknown one.
☞ You win a prize in a contest you never entered.
☞ Someone on a message board such as this one is eager to help you, but only if you download an application of his choosing.
☞ A "FREE WI-FI !!!" network advertises itself in a public place such as an airport, but is not provided by the management.
☞ Anything online that you would expect to pay for is "free."
Unexpected events
☞ A file is downloaded automatically when you visit a web page, with no other action on your part. Delete any such file without opening it.
☞ You open what you think is a document and get an alert that it's "an application downloaded from the Internet." Click Cancel and delete the file. Even if you don't get the alert, you should still delete any file that isn't what you expected it to be.
☞ An application does something you don't expect, such as asking for permission to access your contacts, your location, or the Internet for no obvious reason.
☞ Software is attached to email that you didn't request, even if it comes (or seems to come) from someone you trust.
I don't say that leaving the safe harbor just once will necessarily result in disaster, but making a habit of it will weaken your defenses against malware attack. Any of the above scenarios should, at the very least, make you uncomfortable.
6. Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was always a bad idea, and Java's developers have proven themselves incapable of implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style virus affecting OS X. Merely loading a page with malicious Java content could be harmful.
Fortunately, client-side Java on the Web is obsolete and mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice. Forget about playing games or other non-essential uses of Java.
Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it—not JavaScript—in your browsers.
Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a task on a specific site, enable Java only for that site in Safari. Never enable Java for a public website that carries third-party advertising. Use it only on well-known, login-protected, secure websites without ads. In Safari 6 or later, you'll see a lock icon in the left side of the address bar when visiting a secure site.
Stay within the safe harbor, and you’ll be as safe from malware as you can practically be. The rest of this comment concerns what you should not do to protect yourself.
7. Never install any commercial "anti-virus" (AV) or "Internet security" products for the Mac, as they are all worse than useless. If you need to be able to detect Windows malware in your files, use one of the free security apps in the Mac App Store—nothing else.
Why shouldn't you use commercial AV products?
☞ To recognize malware, the software depends on a database of known threats, which is always at least a day out of date. This technique is a proven failure, as a major AV software vendor has admitted. Most attacks are "zero-day"—that is, previously unknown. Recognition-based AV does not defend against such attacks, and the enterprise IT industry is coming to the realization that traditional AV software is worthless.
☞ Its design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere. In order to meet that nonexistent threat, commercial AV software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
☞ By modifying the operating system, the software may also create weaknesses that could be exploited by malware attackers.
☞ Most importantly, a false sense of security is dangerous.
8. An AV product from the App Store, such as "ClamXav," has the same drawback as the commercial suites of being always out of date, but it does not inject low-level code into the operating system. That doesn't mean it's entirely harmless. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so will corrupt the Mail database. The messages should be deleted from within the Mail application.
An AV app is not needed, and cannot be relied upon, for protection against OS X malware. It's useful, if at all, only for detecting Windows malware, and even for that use it's not really effective, because new Windows malware is emerging much faster than OS X malware.
Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else. A malicious attachment in email is usually easy to recognize by the name alone. An actual example:
London Terror Moovie.avi [124 spaces] Checked By Norton Antivirus.exe
You don't need software to tell you that's a Windows trojan. Software may be able to tell you which trojan it is, but who cares? In practice, there's no reason to use recognition software unless an organizational policy requires it. Windows malware is so widespread that you should assume it's in every email attachment until proven otherwise. Nevertheless, ClamXav or a similar product from the App Store may serve a purpose if it satisfies an ill-informed network administrator who says you must run some kind of AV application. It's free and it won't handicap the system.
The ClamXav developer won't try to "upsell" you to a paid version of the product. Other developers may do that. Don't be upsold. For one thing, you should not pay to protect Windows users from the consequences of their choice of computing platform. For another, a paid upgrade from a free app will probably have all the disadvantages mentioned in section 7.
9. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use in the Sharing preference pane. All are disabled by default.
10. As a Mac user, you don't have to live in fear that your computer may be infected every time you install software, read email, or visit a web page. But neither can you assume that you will always be safe from exploitation, no matter what you do. Navigating the Internet is like walking the streets of a big city. It's as safe or as dangerous as you choose to make it. The greatest harm done by security software is precisely its selling point: it makes people feel safe. They may then feel safe enough to take risks from which the software doesn't protect them. Nothing can lessen the need for safe computing practices.

How do I set up file sharing and keep my Firewall on?

When I turned my Firewall on, I lost the ability to share files and screens on my LAN. When I looked at the advanced settings, I saw that File Sharing, Screen Sharing and Web Sharing were already set to Allow incoming connections but other, related, services, AppleFileServer, httpd, kdc, netbiosd, and screensharingd were set to block incoming connections. I reset the latter to allow incoming connections but was still unable to access my computer from another. Once I turned off the Firewall, I was able to access file sharing and screensharing from another computer on my LAN.
I have a firewall built into my external router so I have some protection but I still feel uncomfortable with the Firewall on my computer turned off.
When my firewall is on even with setting up to allow incoming connections, there are lots of console messages like:
1/8/12 3:00:00.882 PM Firewall: Deny netbiosd data in from 192.168.1.2:51619 to port 137 proto=17
They go away as soon as I turn off the firewall.
I did not find the Apple technical article "Set firewall access for services and applications" at http://docs.info.apple.com/article.html?path=Mac/10.7/en/mh18503.html useful at all.
Any ideas as to what is wrong?

I normally have a Firewall enabled. I recently had to do an erase and install of Lion, followed by a one-by-one re-install of all of my software. One of the first things I did was to set up all of my System Preferences the way I like them; Turning the Firewall on was one of them. Later I noticed it was off and turned it on again. I had already set up sharing and was surprised to see the problem when I turned it back on.
As to why do I think it needs to be on. It is another part of my security layer.

Family sharing and child's id

i want to set up Apple id's for my children under family sharing.I only have a debit card which is used for my own I'd. Is it possible to use this for family sharing?

Hi Cobo127,
To create Apple IDs for your children under Family Sharing, you would need a credit card for verification, at least for the initial setup:
Create an Apple ID for your child
Before you begin, make sure that you're using a credit card as your iTunes Store and App Store payment method. To comply with child online privacy protection laws, you will use the CVV or security code from a valid credit card as part of providing your parental consent. If the card on file is a debit card or another payment method, you’ll be asked to provide a credit card before you can continue. After you create the child's Apple ID, you can change your payment method back to a debit card.
Family Sharing and Apple IDs for kids - Apple Support
Regards,
- Brenden

XP pro file sharing and guest password - how to enable guest password?

Hi,
I want to share files between two Windows XP pro computers. I would also like that these shares can only be accessed with a password.
Here's a description of my setup:
I have two laptops: over 1 yo Fujitsu-Siemens (FS) running on Windows XP pro (finnish) and a brand new Thinkpad T61 (TP) running on Windows XP pro (english). Both of theses computers have guest account enabled and these accounts have also been password protected. FS's guest account is called "vieras" because of the language settings and TP's guest account is of course just "guest". Guest account passwords have been enabled using "net user <user name> *".
I've disabled simple file sharing on both computers, set shared folder permission to only contain these users: TP - "Guest (TP\Guest)" and FS - "Vieras (FS\Vieras)". Both computers have F-secure on them so I've made firewall rules which enable following services both ways to a specific IP: Ping / ICMP echo request and reply ; Windows file sharing and network printers ; Windows network browsing ; ICMP / Internet Control Message Protocol. I've also enabled these services on Windows firewall.
These computers can connect to each other either via Wi-Fi access point (b-mode) or directly using an ad-hoc Wi-Fi configuration (g-mode). Obviously the latter is used for more bandwidth hungry file transfers. Also, sometimes a cross-over Ethernet cable is used as well for even faster file transfers.
Everything on my setup works just fine except just one thing. I connect to a shared resource by running the computer's IP address. When I connect from TP to FS it prompts for username and password. FS accepts both english and finnish names for the guest account provided that the password is correct. But here's the problem... When connecting from FS to TP _no password or username prompt appears_. If I browse TP's shared folder sessions (under My Computer -> manage) I can see that FS is logged on as "vieras" i.e. FS's guest account.
Since I enabled FS's network shares over a year a go I can't remember everything I did to make it work. Every relevant configuration on TP and FS seem to be identical (e.g. "Security settings -> local policies -> security options -> Accounts: limit local account use of blank passwords to console logon only -> enabled") but still TP accepts connections without password prompt.
I've tried to get TP's password prompts enabled for a while now without any success. I did a lot of searching on the subject but I could only find instructions on how to disable guest account password prompts for network shares.
Has anyone had similar experiences or does anyone know what I should try out next? Thanks...
Solved!
Go to Solution.

Success!
I solved my problem by changing guest account passwords. I tried to keep things simple by using the same guest password on both computers. This however allowed FS to log on to TP without guest password for some unknown reason. My logic would tell me that having the same guest password would allow both computers to log in without password but this wasn't obviously the case. I guess Windows has its own logic that I can't figure out or this issue had something to do with different language setups. Anyhow my shares work now like I want them to work.

Family Sharing and family calendar ???

I've read that the Family Sharing feature in iOS 8 offers a family calendar. Looking for some guidance on how it works pls.
We have four family members in our household, and each person has their own separate iCloud ID: [email protected], [email protected], [email protected] and [email protected] This allows each of us to have a separate email address, separate 5GB of storage, etc. I have set up Family Sharing on all our devices. I am the Family Organizer (in Apple terminology).
In addition to the separate calendar that each of us has with our individual iCloud ID's, my understanding is that we also can have a family calendar that all four of us can share. I guess this would be a 5th calendar in our case: our four individual calendars plus the family calendar. But I do not know how to set up the family calendar. And once set up, I do not know how to specify that an entry should go on the family calendar versus going on my individual calendar.
Advice welcome.

Hi pomme4moi,
Thanks for visiting Apple Support Communities.
When you set up Family Sharing and added your family members, this should have created a shared iCloud calendar called Family that the other four iCloud accounts can use.
Family Sharing creates a family calendar where everyone can view, add, or change events and appointments, and they can also get an alert when something changes. And anyone can use the Reminders app to send time or location reminders to the family. So when it’s picture day, pizza night, or just a trip to the beach, everyone’s in the know.
From:
Family Sharing
You can add an event to the Family calendar by adding the event as normal:
Add an event. Tap , then fill in the event details.
From:
Calendar at a glance - iPhone
From the add an event screen, swipe down and tap Calendar, then choose Family to add the event you're creating to the shared family calendar.
Best Regards,
Jeremy

Few basic questions about sharing and other stuff..

Hi there!
First of all I know where are "101" pages, but they are not giving detail information.
1.I know there are some folders where I can put files, web-sites and other in order to enable sharing.
What do I have to do to enable other users (from internet to)
- view my webpage when they enter my IP address in browser
- to access files which I want them to be able to acces (with user and password required)? I know there is sth like sharing, and windows sharing, but I give access to my all user folder, do I have to create new accounts on my mac?
2. It's kind of small problem, but can I run apps in finder using only keyboard (enter causes rename action)
3. Why doesn't safari keep addresses I used in addres field after few days?
The most important question is 1.
Will be gratefull for help.
Thanks
Adam Mscisz

1. Start Personal Web Sharing from the Sharing pane of System Preferences; if you have a router between your computer and the Internet, ports 80 and 443 need to be forwarded to your computer. You can set this up from the router's configuration page, which is accessible by finding the router address in the Network pane of System Preferences and putting it into a web browser. See this article for instructions on how to password protect your shared files.
2. You can use the Command and O keyboard shortcut to open the selected item in the Finder.
3. The default setting in Safari is to keep the history for 7 days. You can use the method posted by ptejad in this article to extend the time Safari remembers the history for. The method at the top of the linked page won't work in Tiger.
(14218)

Data Protection Act

Hi All,
I have tried to get my customer Information that is held by HP as per section 7 (1) of the Data Protection Act.
HP has said it is aganist company policy to do so.
Has anyone else had simular issue.
Many thanks
Daniel

Thank you for visiting the HP Support Forum. This is a peer to peer community for customers to connect and share solutions on their HP consumer products. If you have direct feedback for HP about their products or services, please use the link below.
http://welcome.hp.com/country/us/en/wwcontact_us.html
If you have other questions and concerns, please feel free to send me a private message
Wendy M - HP Support Forums Moderator
Click the Kudos star as a way to say "thank you" for helpful posts.
Be sure to come back and click the 'Accept as Solution' button on the post that solved your issue - it may help someone else.
Rules of Participation

Why won't Home Sharing play Protected AAC files on iOS 7?

The Details
iTunes 11.1.3 on an Early 2009 iMac running 10.8.5
Two iPhone Fives running iOS 7.04
iPad 2 running 7.04
iPad running iOS 5.1.1
When sharing my iTunes library from my iMac, protected AAC files will not play on my iOS devices running iOS 7.0.4, however they will play on my wife's old iPad running iOS 5.1.1. Also, I've noticed that music purchased from the iTunes store comes or came in two different flavors, purchased AAC files and Protected AAC files. So, while my devices running 7.0.4 won't play protected AAC files, all of my devices will play purchased AAC files.
I don't know if it matters, but all four of the devices are using my Apple ID in Settings > Music > Home Sharing, and one of the iPhones and the old iPad are used by my wife and in Settings > iCloud > is a different ID for her iCloud Account.
What gives?
Thank you
Cloudhr

The protected AAC files WILL play on her iPad running iOS 5.1.1. They WON'T play on any of our iOS devices running iOS 7.0.4. All the files were imported into my iTunes library using the same Apple ID. There is only one iTunes account which uses my Apple ID and credit card info. All of our devices sync to my iTunes library in my administarator account on my my iMac.
Thank you
Cloudhr

Best Practises for File Sharing and Print Server on Windows Server 2012

Is it better to have File Sharing and Print Server installed on the same Windows 2012 Server ?
Or, they should be installed on 2 different Windows Servers ?
Hussien Sherief

It will work just fine to combine them.
But most people would recommend keeping functionality separate... if the budget allows. That whole "single point of failure" concept. If that server dies, you've lost both of those functions.

I turned on home sharing, and it doesn't show up in my library. I tried switching it off and it still won't show up. I know other itunes are open and they don't show up in my itunes. What do I need to do? I have the newest version of itunes

I have the latest version of itunes. I turned on the home sharing, and it asked for my ID and everything and it said it loaded. Then I went to open another library up and I don't know if the library is available to me. How do I get to the other library from my computer? I'm using the same home sharing username and password, but i don't see it. The other library has the latest version as well.

If you click View, Show Sidebar you will see the other libraries under Shared in the left hand column. Click on the Library you want and you can expand it to select Music, Movies etc. Select whatever items you want and click import if you want to move them to your Library.
You will have to have all computers authorised with the relevant Apple ID's
Store > Authorise this computer...
This is separate from the Home Sharing username and password and is to allow playing of DRM Movies, TV shows etc from the other computer.
If both Computers use the same apple id this step is not required.

Family sharing. i have set my wife up on family sharing and each time we try to download a book or an app, we are requested that i update the payment details. I have done this and we still cannot share.. what do i do or how do i update the payment

family sharing. i have set my wife up on family sharing and each time we try to download a book or an app, we are requested that i update the payment details. I have done this and we still cannot share.. what do i do or how do i update the payment details to enable my wife to download

Drrhythm2 wrote:
What's the best solution for this? I
Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer.

I want to change the sharing and permissions of a large number of photos. How can I do this in bulk rather than one at a time?

I want to change the sharing and permissions of a large number of photos. How can I do this in bulk rather than one at a time?

Does this involve iPhoto in some way?

Family sharing and iTunes Allowances

My daughter is on family sharing so that she can access music she purchased on my account before she had her own account AND I have created an iTunes allowance for her for new purchases to limit her spending on her account. Should her new purchases come FIRST from her allowance instead of my card? So far all her purchases are being charged to my card. Her allowance does show up on her account, so I know her account has been properly credited with the funds. Is there a better way to give her access to previously purchased music/apps on my account (without giving her access to my credit card)? Thanks for any help you can offer.

Hi yosemitedoran,
Welcome to the Support Communities! If I'm understanding your question ... your daughter has two different Apple ID's? If so, she can't use iTunes Allowances on the Apple ID she is using for Family Sharing.
Start or join a family group using Family Sharing - Apple Support
http://support.apple.com/en-us/HT201088
Start a family group
One adult in the family—the family organizer—can set up Family Sharing for the group. When you set up Family Sharing, you'll be asked to confirm that you agree to pay for purchases initiated by the family members you invite and that you have a valid payment method on file. Valid payment methods for setting up Family Sharing include credit cards and debit cards.
Set up and manage iTunes Allowance - Apple Support
http://support.apple.com/en-is/HT201676
If you use Family Sharing and Ask to Buy is enabled for your account, you can't buy iTunes Allowances.
For the Apple ID that is not part of Family Sharing, this is a possible option:
Set up your Apple ID for iCloud and iTunes - Apple Support
http://support.apple.com/en-us/HT204053
I have purchased music, apps, or books with multiple Apple IDs. How can I get all of this content onto my iOS device?
First, copy all of your purchased content so that it's on the same Mac or PC with iTunes. This computer should be the one you sync your device with.
iTunes for Mac: How to copy purchases between computers
iTunes for Windows: How to copy purchases between computers
Next, authorize your computer to play content with each Apple ID in iTunes. After your computer is authorized for all of your content, it can be synced to your iPhone, iPad, or iPod touch.
I hope this information helps ....
- Judy

Family sharing and iTunes credit

hi all,
my partner has set up family sharing and I have joined it. I understand that one credit card is used for all members (although I think this somewhat daft). My problem is that I only ever really use iTunes vouchers. I have just trie to purchase a film and it is telling me the family sharing organiser needs to authorise my purchases for the joint payment method. Firstly I don't want to use the joint payment method, my iTunes credit covers the cost and secondly I don't want to have to wait for someone to accept something every time I want to make a purchase, but I do want to share my puchases. Is there any way around this and when she accepts it is it going to use my store credit?
thank you for your comments.

This is my account info for iTunes & AppStore:
This is the payment info in iCloud Family Sharing settings:
Obviously I was able to change the payment info in iTunes/App Store. What do I have to do to make that carry over to iCloud?

Cyber Intelligence Sharing and Protection Act

Similar Messages

Maybe you are looking for