D30, 4223-62U, Win7x64, RAID10, No drives found
New D30, downloaded RAID drivers for Intel C600. Pressing F6 to install drivers during Windows Ult x64 install and driver "Intel C600 Series Chipset SATA Raid" installs but windows displays "No drives were found".
I've tried changing the BIOS to use SATA RAID and SATA AHCP but to no avail. Raid array is bootable. I'm stumped. I've used Lenovo's drivers and Intel drivers with no luck. I updated the BIOS, too. Any ideas what to try?
There are 4 500GB HDD I want to raid 1+0.
Thanks.
Solved!
Go to Solution.
Where are your HDDs connected....SCU ports (blue) or AHCI ports (red/orange)?
I'm going to assume it's SCU. If so, all RAID configs on SCU must be set up using the SCU oprom (accessed by hitting CTRL+I during POST when prompted). Changing the "SATA mode" setting in BIOS setup will only affect the AHCI ports and will have zero effect on the SCU ports.
Once you set up the RAID in the oprom, then it's just a matter of providing the correct driver for windows during setup to get it to recognize the RAID array.
Similar Messages
-
I've just ordered a d30 4223 xb1 from the outlet. I currently have an s20, but wanted to upgrade to the d30 because I wanted the larger case with room for more hard drives.
As with my s20, I bought it because it was cheap, and plan on swapping out the cpu and adding memory and a RAID controller to suit my needs. I want to install the fastest single processor I can afford. Is this unit compatible with the e5-1600 series or do I need to upgrade to a 2600 series? I prefer a faster clock speed over processor cores for my applications.
Also, will I need to upgrade the CPU fan if I go to a higher wattage cpu as I did on the s20? Current processor is e5-2609.
Thank you for any advice you can provide,It is possible to run E5-16XX (v1 Sandy Bridge) CPUs in your 4223 D30. Just keep in mind that because there is no 2nd QPI link in those processors, the 2nd CPU socket and it's memory slots will essentially be dead.
Your current fansink should work just fine on any of the E5-16XX CPUs as long as you stay at 135W TDP or below. Moving to 150W TDP CPUs would require different fansinks. As far as I know, all of the E5-16XX CPUs are 135W or below, so you should be OK. -
No suitable driver found error while connecting to remote IBM DB2 database.
While trying to connect to IBM DB2 database on a remote location, though the connection was successful from 'Application Resources', following trace could be recovered while performing 'Run' from 'AppModule':
ERROR:
(oracle.jbo.DMLException) JBO-26061: Error while opening JDBC connection.
----- Level 1: Detail 0 -----
(java.sql.SQLException) No suitable driver found for jdbc:as400://XX.XXX.XX.XXX;naming=system;libraries=TEST;translate binary=true;prompt=false
[891] (oracle.adf.model.bc4j.DataControlFactoryImpl.SyncMode = Immediate
[892] Creating a new pool resource
[893] BC4JDeployPlatform: LOCAL
[894] Propertymanager: skipping reload of file and system based properties
[895] {{ begin Loading BC4J properties
[896] -----------------------------------------------------------
[897] BC4J Property jbo.default.language='en' -->(MetaObjectManager) from System Default
[898] BC4J Property jbo.default.country='US' -->(MetaObjectManager) from System Default
[899] Skipping empty Property jbo.default.locale.variant from System Default
[900] BC4J Property DeployPlatform='LOCAL' -->(SessionImpl) from Client Environment
[901] Skipping empty Property ConnectionMode from System Default
[902] Skipping empty Property HostName from System Default
[903] Skipping empty Property ConnectionPort from System Default
[904] BC4J Property jbo.locking.mode='optimistic' -->(MetaObjectManager) from Client Environment
[905] BC4J Property jbo.txn.disconnect_level='0' -->(SessionImpl) from System Default
[906] Skipping empty Property ApplicationPath from System Default
[907] BC4J Property AppModuleJndiName='model.AppModule' -->(SessionImpl) from Client Environment
[908] Skipping empty Property java.naming.security.principal from System Default
[909] Skipping empty Property java.naming.security.credentials from System Default
[910] Skipping empty Property jbo.user.principal from System Default
[911] BC4J Property jbo.simulate.remote='false' -->(SessionImpl) from System Default
[912] BC4J Property jbo.security.context='oracle.security.jazn' -->(MetaObjectManager) from System Default
[913] Skipping empty Property jbo.object.marshaller from System Default
[914] BC4J Property jbo.use.pers.coll='false' -->(SessionImpl) from System Default
[915] BC4J Property jbo.pers.max.rows.per.node='70' -->(SessionImpl) from System Default
[916] BC4J Property jbo.pers.max.active.nodes='30' -->(SessionImpl) from System Default
[917] BC4J Property jbo.validation.threshold='10' -->(SessionImpl) from System Default
[918] BC4J Property jbo.sparse.array.threshold='20' -->(SessionImpl) from System Default
[919] Skipping empty Property jbo.pcoll.mgr from System Default
[920] BC4J Property jbo.txn_table_name='PS_TXN' -->(SessionImpl) from System Default
[921] BC4J Property jbo.txn_seq_name='PS_TXN_seq' -->(SessionImpl) from System Default
[922] BC4J Property jbo.txn_seq_inc='50' -->(SessionImpl) from System Default
[923] BC4J Property jbo.control_table_name='PCOLL_CONTROL' -->(MetaObjectManager) from System Default
[924] BC4J Property jbo.stringmanager.factory.class='use_default' -->(SessionImpl) from System Default
[925] BC4J Property jbo.domain.date.suppress_zero_time='true' -->(MetaObjectManager) from System Default
[926] BC4J Property jbo.domain.bind_sql_date='true' -->(MetaObjectManager) from System Default
[927] BC4J Property jbo.domain.string.as.bytes.for.raw='false' -->(MetaObjectManager) from System Default
[928] BC4J Property jbo.fetch.mode='AS.NEEDED' -->(MetaObjectManager) from System Default
[929] BC4J Property jbo.323.compatible='false' -->(MetaObjectManager) from System Default
[930] BC4J Property jbo.903.compatible='false' -->(MetaObjectManager) from System Default
[931] Skipping empty Property JBODynamicObjectsPackage from System Default
[932] BC4J Property MetaObjectContextFactory='oracle.jbo.mom.xml.DefaultMomContextFactory' -->(MetaObjectManager) from System Default
[933] BC4J Property jbo.load.components.lazily='false' -->(MetaObjectManager) from System Default
[934] BC4J Property MetaObjectContext='oracle.jbo.mom.xml.XMLContextImpl' -->(MetaObjectManager) from System Default
[935] BC4J Property java.naming.factory.initial='oracle.jbo.common.JboInitialContextFactory' -->(SessionImpl) from Client Environment
[936] BC4J Property IsLazyLoadingTrue='true' -->(MetaObjectManager) from Client Environment
[937] BC4J Property oracle.jbo.usemds='true' -->(MetaObjectManager) from System Default
[938] BC4J Property oracle.adfm.usemds='true' -->(MetaObjectManager) from System Default
[939] BC4J Property ActivateSharedDataHandle='false' -->(MetaObjectManager) from System Default
[940] Skipping empty Property HandleName from System Default
[941] Skipping empty Property Factory-Substitution-List from System Default
[942] BC4J Property jbo.project='model.Model' -->(Configuration) from Client Environment
[943] BC4J Property jbo.max.cursors='50' -->(MetaObjectManager) from System Default
[944] WARNING: Property jbo.dofailoverset to null
[945] Skipping empty Property jbo.dofailover from null
[946] WARNING: Property jbo.envinfoproviderset to null
[947] Skipping empty Property jbo.envinfoprovider from null
[948] Skipping empty Property jbo.rowid_am_conn_name from System Default
[949] Skipping empty Property jbo.rowid_am_datasource_name from System Default
[950] WARNING: Property jbo.ampool.writecookietoclientset to null
[951] Skipping empty Property jbo.ampool.writecookietoclient from null
[952] WARNING: Property jbo.doconnectionpoolingset to null
[953] Skipping empty Property jbo.doconnectionpooling from null
[954] WARNING: Property jbo.recyclethresholdset to null
[955] Skipping empty Property jbo.recyclethreshold from null
[956] WARNING: Property jbo.ampool.dynamicjdbccredentialsset to null
[957] Skipping empty Property jbo.ampool.dynamicjdbccredentials from null
[958] BC4J Property jbo.ampool.resetnontransactionalstate='true' -->(SessionImpl) from System Default
[959] BC4J Property jbo.ampool.sessioncookiefactoryclass='oracle.jbo.common.ampool.DefaultSessionCookieFactory' -->(Configuration) from Client Environment
[960] WARNING: Property jbo.ampool.connectionstrategyclassset to null
[961] Skipping empty Property jbo.ampool.connectionstrategyclass from null
[962] WARNING: Property jbo.ampool.maxpoolsizeset to null
[963] Skipping empty Property jbo.ampool.maxpoolsize from null
[964] BC4J Property jbo.ampool.initpoolsize='0' -->(Configuration) from Client Environment
[965] WARNING: Property jbo.ampool.monitorsleepintervalset to null
[966] Skipping empty Property jbo.ampool.monitorsleepinterval from null
[967] WARNING: Property jbo.ampool.minavailablesizeset to null
[968] Skipping empty Property jbo.ampool.minavailablesize from null
[969] WARNING: Property jbo.ampool.maxavailablesizeset to null
[970] Skipping empty Property jbo.ampool.maxavailablesize from null
[971] WARNING: Property jbo.ampool.maxinactiveageset to null
[972] Skipping empty Property jbo.ampool.maxinactiveage from null
[973] WARNING: Property jbo.ampool.timetoliveset to null
[974] Skipping empty Property jbo.ampool.timetolive from null
[975] WARNING: Property jbo.ampool.doampoolingset to null
[976] Skipping empty Property jbo.ampool.doampooling from null
[977] WARNING: Property jbo.ampool.issupportspassivationset to null
[978] Skipping empty Property jbo.ampool.issupportspassivation from null
[979] BC4J Property jbo.ampool.isuseexclusive='true' -->(SessionImpl) from System Default
[980] BC4J Property jbo.passivationstore='null' -->(SessionImpl) from System Default
[981] BC4J Property jbo.saveforlater='false' -->(SessionImpl) from System Default
[982] BC4J Property jbo.snapshotstore.undo='persistent' -->(SessionImpl) from System Default
[983] BC4J Property jbo.maxpassivationstacksize='10' -->(SessionImpl) from System Default
[984] BC4J Property jbo.txn.handleafterpostexc='false' -->(SessionImpl) from System Default
[985] BC4J Property jbo.connectfailover='true' -->(SessionImpl) from System Default
[986] BC4J Property jbo.datasource_naming_factory='oracle.jbo.server.DataSourceContextFactory' -->(MetaObjectManager) from System Default
[987] WARNING: Property jbo.maxpoolcookieageset to null
[988] Skipping empty Property jbo.maxpoolcookieage from null
[989] WARNING: Property PoolClassNameset to null
[990] Skipping empty Property PoolClassName from null
[991] BC4J Property jbo.maxpoolsize='4096' -->(MetaObjectManager) from System Default
[992] BC4J Property jbo.initpoolsize='0' -->(MetaObjectManager) from System Default
[993] BC4J Property jbo.poolrequesttimeout='30000' -->(MetaObjectManager) from System Default
[994] BC4J Property jbo.poolmonitorsleepinterval='600000' -->(MetaObjectManager) from System Default
[995] BC4J Property jbo.poolminavailablesize='5' -->(MetaObjectManager) from System Default
[996] BC4J Property jbo.poolmaxavailablesize='25' -->(MetaObjectManager) from System Default
[997] BC4J Property jbo.poolmaxinactiveage='600000' -->(MetaObjectManager) from System Default
[998] BC4J Property jbo.pooltimetolive='-1' -->(MetaObjectManager) from System Default
[999] BC4J Property jbo.qcpool.monitorsleepinterval='1800000' -->(SessionImpl) from System Default
[1000] BC4J Property jbo.qcpool.maxinactiveage='900000' -->(SessionImpl) from System Default
[1001] BC4J Property jbo.qcpool.maxweight='-1' -->(SessionImpl) from System Default
[1002] BC4J Property RELEASE_MODE='Stateful' -->(MetaObjectManager) from System Default
[1003] BC4J Property jbo.assoc.consistent='true' -->(MetaObjectManager) from System Default
[1004] BC4J Property jbo.viewlink.consistent='DEFAULT' -->(MetaObjectManager) from System Default
[1005] BC4J Property jbo.finder.range.size='DEFAULT' -->(MetaObjectManager) from System Default
[1006] BC4J Property jbo.passivation.TrackInsert='true' -->(MetaObjectManager) from System Default
[1007] Skipping empty Property jbo.ViewCriteriaAdapter from System Default
[1008] BC4J Property jbo.SQLBuilder='DB2' -->(MetaObjectManager) from Client Environment
[1009] BC4J Property jbo.ConnectionPoolManager='oracle.jbo.server.ConnectionPoolManagerImpl' -->(MetaObjectManager) from System Default
[1010] BC4J Property jbo.TypeMapEntries='OracleApps' -->(MetaObjectManager) from Client Environment
[1011] Skipping empty Property jbo.sql92.JdbcDriverClass from System Default
[1012] BC4J Property jbo.sql92.LockTrailer='FOR UPDATE' -->(MetaObjectManager) from System Default
[1013] BC4J Property jbo.jdbc.trace='false' -->(MetaObjectManager) from System Default
[1014] BC4J Property jbo.abstract.base.check='true' -->(MetaObjectManager) from System Default
[1015] BC4J Property jbo.assoc.where.early.set='false' -->(MetaObjectManager) from System Default
[1016] BC4J Property jbo.use.findbykey.for.assoc='true' -->(MetaObjectManager) from System Default
[1017] BC4J Property jbo.sql92.DbTimeQuery='select sysdate from dual' -->(MetaObjectManager) from System Default
[1018] BC4J Property oracle.jbo.defineColumnLength='skipDefines' -->(MetaObjectManager) from System Default
[1019] BC4J Property jbo.jdbc_bytes_conversion='jdbc' -->(MetaObjectManager) from System Default
[1020] Skipping empty Property jbo.tmpdir from System Default
[1021] Skipping empty Property jbo.server.internal_connection from System Default
[1022] BC4J Property SessionClass='oracle.jbo.server.SessionImpl' -->(SessionImpl) from System Default
[1023] Skipping empty Property TransactionFactory from System Default
[1024] Skipping empty Property jbo.def.mgr.listener from System Default
[1025] Skipping empty Property jbo.use.global.sub.map from System Default
[1026] BC4J Property jbo.debugoutput='console' -->(Diagnostic) from System Property
[1027] BC4J Property jbo.debug.prefix='DBG: ' -->(Diagnostic) from /oracle/jbo/common/Diagnostic.properties resource
[1028] BC4J Property jbo.logging.show.timing='false' -->(Diagnostic) from /oracle/jbo/common/Diagnostic.properties resource
[1029] BC4J Property jbo.logging.show.function='false' -->(Diagnostic) from /oracle/jbo/common/Diagnostic.properties resource
[1030] BC4J Property jbo.logging.show.level='false' -->(Diagnostic) from /oracle/jbo/common/Diagnostic.properties resource
[1031] BC4J Property jbo.logging.show.linecount='true' -->(Diagnostic) from /oracle/jbo/common/Diagnostic.properties resource
[1032] BC4J Property jbo.logging.trace.threshold='6' -->(Diagnostic) from /oracle/jbo/common/Diagnostic.properties resource
[1033] BC4J Property jbo.jdbc.driver.verbose='false' -->(Diagnostic) from System Default
[1034] Skipping empty Property oracle.home from System Default
[1035] Skipping empty Property oc4j.name from System Default
[1036] Skipping empty Property jbo.shared.txn from System Default
[1037] BC4J Property oracle.adfm.useSharedTransactionForFrame='true' -->(MetaObjectManager) from System Default
[1038] BC4J Property oracle.adfm.joinNewFrameTransaction='false' -->(MetaObjectManager) from System Default
[1039] BC4J Property jbo.ejb.txntimeout='1830' -->(SessionImpl) from System Default
[1040] BC4J Property jbo.ejb.txntype='global' -->(SessionImpl) from System Default
[1041] BC4J Property jbo.ejb.txn.disconnect_on_completion='false' -->(SessionImpl) from System Default
[1042] BC4J Property jbo.ejb.useampool='false' -->(SessionImpl) from Client Environment
[1043] Skipping empty Property oracle.jbo.schema from System Default
[1044] BC4J Property jbo.xml.validation='false' -->(MetaObjectManager) from System Default
[1045] BC4J Property ord.RetrievePath='ordDeliverMedia' -->(MetaObjectManager) from System Default
[1046] BC4J Property ord.HttpMaxMemory='102400' -->(MetaObjectManager) from System Default
[1047] Skipping empty Property ord.HttpTempDir from System Default
[1048] BC4J Property ord.wmp.classid='clsid:22D6F312-B0F6-11D0-94AB-0080C74C7E95' -->(MetaObjectManager) from System Default
[1049] BC4J Property ord.qp.classid='clsid:02BF25D5-8C17-4B23-BC80-D3488ABDDC6B' -->(MetaObjectManager) from System Default
[1050] BC4J Property ord.rp.classid='clsid:CFCDAA03-8BE4-11cf-B84B-0020AFBBCCFA' -->(MetaObjectManager) from System Default
[1051] BC4J Property ord.wmp.codebase='http://activex.microsoft.com/activex/controls/mplayer/en/nsmp2inf.cab#Version=5,1,52,701' -->(MetaObjectManager) from System Default
[1052] BC4J Property ord.qp.codebase='http://www.apple.com/qtactivex/qtplugin.cab' -->(MetaObjectManager) from System Default
[1053] Skipping empty Property ord.rp.codebase from System Default
[1054] BC4J Property ord.wmp.plugins.page='http://www.microsoft.com/isapi/redir.dll?prd=windows&sbp=mediaplayer&ar=Media&sba=Plugin&' -->(MetaObjectManager) from System Default
[1055] BC4J Property ord.qp.plugins.page='http://www.apple.com/quicktime/download/' -->(MetaObjectManager) from System Default
[1056] BC4J Property ord.rp.plugins.page='http://www.real.com/player/' -->(MetaObjectManager) from System Default
[1057] BC4J Property jbo.security.enforce='None' -->(SessionImpl) from System Default
[1058] BC4J Property jbo.security.loginmodule='oracle.security.jazn.oc4j.JAZNUserManager' -->(SessionImpl) from System Default
[1059] Skipping empty Property jbo.security.config from System Default
[1060] BC4J Property jbo.server.useNullDbTransaction='false' -->(SessionImpl) from System Default
[1061] BC4J Property jbo.domain.reopenblobstream='false' -->(MetaObjectManager) from System Default
[1062] BC4J Property jbo.server.retainAssocAccessor='false' -->(SessionImpl) from System Default
[1063] BC4J Property jbo.groovy.debug='false' -->(MetaObjectManager) from System Default
[1064] BC4J Property jbo.busevent.suspendpublication='false' -->(SessionImpl) from System Default
[1065] BC4J Property oracle.adfm.DefaultEventPolicy='NONE' -->(MetaObjectManager) from System Default
[1066] BC4J Property oracle.adfm.useRootFrameOnly='false' -->(MetaObjectManager) from System Default
[1067] Copying unknown Client property (user='TESTER') to session
[1068] Copying unknown Client property (FullProxyInterfaceName='model.common.AppModule') to session
[1069] Copying unknown Client property (jbo.applicationmoduleclassname='model.AppModule') to session
[1070] Copying unknown Client property (jbo.jdbc.username='TESTER') to session
[1071] Copying unknown Client property (BC4JConfigName='AppModuleLocal') to session
[1072] Copying unknown Client property (DsPasswd='workout') to session
[1073] Copying unknown Client property (JDBCName='ConnectTo146') to session
[1074] Copying unknown Client property (DsUserName='TESTER') to session
[1075] Copying unknown Client property (name='137E06086E5') to session
[1076] Copying unknown Client property (ApplicationName='model.AppModule') to session
[1077] Copying unknown Client property (LastUsedConfiguration='AppModuleLocal') to session
[1078] Copying unknown Client property (password='*****') to session
[1079] Copying unknown Client property (JDBCDataSource='java:comp/env/jdbc/ConnectTo146DS') to session
[1080] Copying unknown Client property (jbo.jdbc.connectstring='jdbc:as400:/;naming=system;libraries=QTEMP XAN4CDXA XAN4CDEM;translate binary=true;prompt=false') to session
[1081] Copying unknown Client property (DBconnection='jdbc:as400://;naming=system;libraries=QTEMP XAN4CDXA XAN4CDEM;translate binary=true;prompt=false') to session
[1082] Copying unknown Client property (jbo.jdbc.password='*****') to session
[1083] }} finished loading BC4J properties
[1084] -----------------------------------------------------------
[1085] Connected to Oracle JBO Server - Version: 11.1.2.61.83
[1086] mPCollUsePMgr is false
[1087] ViewObjectImpl.mDefaultMaxRowsPerNode is 70
[1088] ViewObjectImpl.mDefaultMaxActiveNodes is 30
[1089] Default locking mode changed to: optimistic
[1090] Created root application module: 'model.AppModule'
[1091] Locale is: 'en_US'
[1092] ApplicationPoolImpl.resourceStateChanged wasn't release related. No notify invoked.
[1093] Trying connection: DataSource='oracle.jbo.server.ConnectionPoolDataSource@191d9ad'...
[1094] Using the oracle.jbo.server.ConnectionPoolDataSource to acquire a connection...
[1095] Creating a new pool resource
[1096] Trying connection/3: url='jdbc:as400:/*****' user='TESTER' password='*****' ...
[1097] DBTransactionImpl.initTransaction: Login failed
[1098] java.sql.SQLException: No suitable driver found for jdbc:as400:;naming=system;libraries=QTEMP XAN4CDXA XAN4CDEM;translate binary=true;prompt=false
at java.sql.DriverManager.getConnection(DriverManager.java:602)
at java.sql.DriverManager.getConnection(DriverManager.java:185)
at oracle.jbo.server.URLConnectionHelper.getConnection(URLConnectionHelper.java:187)
at oracle.jbo.server.URLConnectionHelper.getConnectionFromDriver(URLConnectionHelper.java:50)
at oracle.jbo.server.ConnectionPool.createConnection(ConnectionPool.java:195)
at oracle.jbo.server.ConnectionPool.instantiateResource(ConnectionPool.java:166)
at oracle.jbo.pool.ResourcePool.createResource(ResourcePool.java:580)
at oracle.jbo.pool.ResourcePool.useResource(ResourcePool.java:313)
at oracle.jbo.server.ConnectionPool.getConnectionInternal(ConnectionPool.java:102)
at oracle.jbo.server.ConnectionPool.getConnection(ConnectionPool.java:66)
at oracle.jbo.server.ConnectionPoolManagerImpl.getConnection(ConnectionPoolManagerImpl.java:52)
at oracle.jbo.server.URLConnectionHelper.getConnection(URLConnectionHelper.java:172)
at oracle.jbo.server.URLConnectionHelper.getConnection(URLConnectionHelper.java:45)
at oracle.jbo.server.ConnectionPoolDataSource.getConnection(ConnectionPoolDataSource.java:72)
at oracle.jbo.server.DBTransactionImpl.establishNewConnection(DBTransactionImpl.java:964)
at oracle.jbo.server.DBTransactionImpl.initTransaction(DBTransactionImpl.java:1147)
at oracle.jbo.server.DBTransactionImpl.initTxn(DBTransactionImpl.java:6838)
at oracle.jbo.server.DBTransactionImpl2.connectToDataSource(DBTransactionImpl2.java:298)
at oracle.jbo.server.DBTransactionImpl2.connectToDataSource(DBTransactionImpl2.java:329)
at oracle.jbo.common.ampool.DefaultConnectionStrategy.connect(DefaultConnectionStrategy.java:203)
at oracle.jbo.server.ApplicationPoolMessageHandler.doPoolConnect(ApplicationPoolMessageHandler.java:600)
at oracle.jbo.server.ApplicationPoolMessageHandler.doPoolMessage(ApplicationPoolMessageHandler.java:417)
at oracle.jbo.server.ApplicationModuleImpl.doPoolMessage(ApplicationModuleImpl.java:9021)
at oracle.jbo.common.ampool.ApplicationPoolImpl.sendPoolMessage(ApplicationPoolImpl.java:4606)
at oracle.jbo.common.ampool.ApplicationPoolImpl.prepareApplicationModule(ApplicationPoolImpl.java:2536)
at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:2346)
at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:3245)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:571)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:504)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:499)
at oracle.adf.model.bc4j.DCJboDataControl.initializeApplicationModule(DCJboDataControl.java:517)
at oracle.adf.model.bc4j.DCJboDataControl.getApplicationModule(DCJboDataControl.java:867)
at oracle.jbo.jbotester.binding.TesterBinding.getConnectionInfo(TesterBinding.java:222)
at oracle.jbo.jbotester.MainFrame.initializeDataControl(MainFrame.java:945)
at oracle.jbo.jbotester.MainFrame.loadConfiguration(MainFrame.java:646)
at oracle.jbo.jbotester.MainFrame.processArgs(MainFrame.java:612)
at oracle.jbo.jbotester.MainFrame.main(MainFrame.java:446)
[1099] A dead application module instance was detected
[1100] The application module instance was removed from the pool
[1101] ApplicationPoolImpl.resourceStateChanged wasn't release related. No notify invoked.
[1102] Resetting AM=AppModule
[1103] An exception occured during checkout.
[1104] oracle.jbo.DMLException: JBO-26061: Error while opening JDBC connection.
at oracle.jbo.server.ConnectionPool.createConnection(ConnectionPool.java:207)
at oracle.jbo.server.ConnectionPool.instantiateResource(ConnectionPool.java:166)
at oracle.jbo.pool.ResourcePool.createResource(ResourcePool.java:580)
at oracle.jbo.pool.ResourcePool.useResource(ResourcePool.java:313)
at oracle.jbo.server.ConnectionPool.getConnectionInternal(ConnectionPool.java:102)
at oracle.jbo.server.ConnectionPool.getConnection(ConnectionPool.java:66)
at oracle.jbo.server.ConnectionPoolManagerImpl.getConnection(ConnectionPoolManagerImpl.java:52)
at oracle.jbo.server.URLConnectionHelper.getConnection(URLConnectionHelper.java:172)
at oracle.jbo.server.URLConnectionHelper.getConnection(URLConnectionHelper.java:45)
at oracle.jbo.server.ConnectionPoolDataSource.getConnection(ConnectionPoolDataSource.java:72)
at oracle.jbo.server.DBTransactionImpl.establishNewConnection(DBTransactionImpl.java:964)
at oracle.jbo.server.DBTransactionImpl.initTransaction(DBTransactionImpl.java:1147)
at oracle.jbo.server.DBTransactionImpl.initTxn(DBTransactionImpl.java:6838)
at oracle.jbo.server.DBTransactionImpl2.connectToDataSource(DBTransactionImpl2.java:298)
at oracle.jbo.server.DBTransactionImpl2.connectToDataSource(DBTransactionImpl2.java:329)
at oracle.jbo.common.ampool.DefaultConnectionStrategy.connect(DefaultConnectionStrategy.java:203)
at oracle.jbo.server.ApplicationPoolMessageHandler.doPoolConnect(ApplicationPoolMessageHandler.java:600)
at oracle.jbo.server.ApplicationPoolMessageHandler.doPoolMessage(ApplicationPoolMessageHandler.java:417)
at oracle.jbo.server.ApplicationModuleImpl.doPoolMessage(ApplicationModuleImpl.java:9021)
at oracle.jbo.common.ampool.ApplicationPoolImpl.sendPoolMessage(ApplicationPoolImpl.java:4606)
at oracle.jbo.common.ampool.ApplicationPoolImpl.prepareApplicationModule(ApplicationPoolImpl.java:2536)
at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:2346)
at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:3245)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:571)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:504)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:499)
at oracle.adf.model.bc4j.DCJboDataControl.initializeApplicationModule(DCJboDataControl.java:517)
at oracle.adf.model.bc4j.DCJboDataControl.getApplicationModule(DCJboDataControl.java:867)
at oracle.jbo.jbotester.binding.TesterBinding.getConnectionInfo(TesterBinding.java:222)
at oracle.jbo.jbotester.MainFrame.initializeDataControl(MainFrame.java:945)
at oracle.jbo.jbotester.MainFrame.loadConfiguration(MainFrame.java:646)
at oracle.jbo.jbotester.MainFrame.processArgs(MainFrame.java:612)
at oracle.jbo.jbotester.MainFrame.main(MainFrame.java:446)
Caused by: java.sql.SQLException: No suitable driver found for jdbc:as400://naming=system;libraries=QTEMP XAN4CDXA XAN4CDEM;translate binary=true;prompt=false
at java.sql.DriverManager.getConnection(DriverManager.java:602)
at java.sql.DriverManager.getConnection(DriverManager.java:185)
at oracle.jbo.server.URLConnectionHelper.getConnection(URLConnectionHelper.java:187)
at oracle.jbo.server.URLConnectionHelper.getConnectionFromDriver(URLConnectionHelper.java:50)
at oracle.jbo.server.ConnectionPool.createConnection(ConnectionPool.java:195)
... 32 more
[1105] JUErrorHandlerDlg.reportException(oracle.jbo.jbotester.ErrorHandler$ExceptionWrapper)
[1106] UIMessageBundle (language base) being initialized
Jun 12, 2012 4:38:26 PM oracle.jbo.jbotester.MainFrame exit
INFO: BC4J Tester exit code(-3)
Process exited with exit code -3.When you use DB2 SQL flavor, the ADF BC use the oracle.jbo.server.DB2SQLBuilderImpl class as an SQLBuilder. This class determines the JDBC driver class name as follows:
1) If the JBO configuration parameter jbo.sql92.JdbcDriverClass in not empty, then the JDBC driver class name is taken from there;
2) If the jbo.sql92JdbcDriverClass parameter is empty, then:
<ul><li>If the JDBC URL starts with "jdbc:db2://", then com.ibm.db2.jcc.DB2Driver
<li>If the JDBC URL starts with "jdbc:oracle:db2", then com.oracle.ias.jdbc.db2.DB2Driver
<li>If the JDBC URL starts with "jdbc:datadirect:db2", then com.ddtek.jdbc.db2.DB2Driver
<li>Otherwise, COM.ibm.db2.jdbc.app.DB2Driver</ul>
(Have a look at the source of the method DB2SQLBuilderImpl.getJDBCDriverClassName(String url) for more details).
It is seen from the log in your first post that the parameter jbo.sql92.JdbcDriverClass is empty. As far as your JDBC URL starts with neither of the prefixes specified above (e.g. your URL starts with "jdbc:as400://"), then you should specify the necessary JDBC driver class in the JBO configuration parameter jbo.sql92.JdbcDriverClass. (You can specify it in the AM configuration parameters or in adf-config.xml).
Dimitar -
IMovieHD, "No disc burning drive found" and "The movie could not be sent.."
First post in these subject forums. I am posting the same problem in iDVD and iMovieHD which were from iLife'05, but I won't post there.
I loaded iLife'05 and also managed to get iDVD5 loaded although the packaging indicated that I needed to have a 733mhz G4 or faster processor and I have a Prismo Powerbook, 500 mhz and it was successful or maybe not.
Then I opened iDVD, I got this Error message..."The application iDVD could not be opened because the required hardware could not be found"...which makes sense as I have an external Lacie (CD-R,-RW, DVD-R,-RAM,-RW,R,+RW,R DL) burner that I bought about a year ago that my wife also uses on her G4 tower.......... and I did not have it connected. So I connected it and when I opened iDVD again and it still reads: "The application iDVD could not be opened because the required hardware could not be found." Shut down and reboot, no difference.
This probably does not have any bearing on the issue but in the System Profiler for "Disk Burning" there is a parameter "Burn Support" which is "Yes (Unsupported)", should this be "Yes (supported)"?
Question #1: Does iDVD5 only work with an Apple "superdrive" or does it work with other third party "DVD burners" ?
So I used iMovieHD from iLife'05 to create a project of an old family vacation (from an old 8mm Sony Handycam) and wanted to create a DVD, for archive reasons and to view on TV with a DVD player, but I could not do anything because of different errors now in iMovieHD.
File > Share...(a window opens and I choose iDVD and then click the "share" button) and this error comes up:
The movie could not be sent to iDVD, because of an unknown error.
"Please make sure that iDVD is properly installed, that your project disk has write permission, and that you have enough disk space. (Error 0)"
Next I tried: File > Burn Project to Disc......and this error comes up.
No Disc Burning Drive Found
"If you have an apple-supported disc burner, please check your connections and try again."
The project file is 5.89GB and I have 57.97GB free on the hard drive so I don't think that space on the hard drive is an issue.
Question #2: Is the issue of not being able to create a DVD from iMovieHD related to the iDVD issue although the error messages in iMovieHD and iDVD are different?
Question #3: How are Video DVD's from the Hollywood Studios able to make DVD's longer than 2 hours?
Thanks all for your help in advance. JohnOne more addition to this post, I opened DVD Player and got this error "There was an initialization error. A valid DVD drive could not be found (-70012)
Maybe this will help give someone a clue. -
Hey,
I've been searching this forum for a problem like mine (and I've found a few that are "like" mine, but none that are exactly the same or that will solve my problem).
First, any information that might be relevant (I really have no idea how much of this is relevant, I am brand new to this):
I'm using Eclipse and Apache Tomcat 6.0.14.
I'm trying to set up a JSP page that shows a query from an Access database. I'm working from an example, and I've followed the example to the letter, but it doesn't seem to work for me.
I have set up a "System DSN" ODBC and linked it to the proper .mdb file (I don't know that I'm using the proper terminology, but what I'm talking about is going to Control Panel > Administrative Tools > Data Sources (ODBC) > System DSN tab under Windows XP).
This is what my context.xml (in my WebContent\META-INF directory) looks like:
<?xml version="1.0" encoding="UTF-8"?>
<Context>
<Resource name="jdbc-odbc/ExampleDB" auth="Container"
type="javax.sql.DataSource"
driverClassName="sun.jdbc.odbc.JdbcOdbcDriver"
url="jdbc:odbc:exampleDSN"
removeAbandoned="true"
removeAbandonedTimeout = "20"
maxActive="8" />
</Context> "exampleDSN" is the name of the DSN I set up, and as I understand it, the value of the "name" attribute can be whatever I want, as long as it's referenced correctly in my JSP file.
Here is the content of my JSP file:
<?xml version="1.0" encoding="ISO-8859-1" ?>
<%@ taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c" %>
<%@ taglib uri="http://java.sun.com/jsp/jstl/sql" prefix="sql" %>
<sql:setDataSource dataSource="jdbc-odbc/ExampleDB"/>
<%@ page language="java" contentType="text/html; charset=ISO-8859-1"
pageEncoding="ISO-8859-1"%>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1" />
<title>Insert title here</title>
</head>
<body>
<sql:query var="qry_LoanID">
SELECT LoanID FROM Loan
</sql:query>
</body>
</html>I understand that this won't actually display anything as I have it now, but I'm just trying to get this tiny JSP file to work correctly. That said, here is the error information I am given:
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: An exception occurred processing JSP page /cust_login.jsp at line 17
14: <title>Insert title here</title>
15: </head>
16: <body>
17: <sql:query var="qry_LoanID">
18: SELECT LoanID FROM Loan
19: </sql:query>
20:
Stacktrace:
org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:524)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:417)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
root cause
javax.servlet.ServletException: javax.servlet.jsp.JspException: Unable to get connection, DataSource invalid: "java.sql.SQLException: No suitable driver found for jdbc-odbc/ExampleDB"
org.apache.jasper.runtime.PageContextImpl.doHandlePageException(PageContextImpl.java:850)
org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:779)
org.apache.jsp.cust_005flogin_jsp._jspService(cust_005flogin_jsp.java:91)
org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:393)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
root cause
javax.servlet.jsp.JspException: Unable to get connection, DataSource invalid: "java.sql.SQLException: No suitable driver found for jdbc-odbc/ExampleDB"
org.apache.taglibs.standard.tag.common.sql.QueryTagSupport.getConnection(QueryTagSupport.java:276)
org.apache.taglibs.standard.tag.common.sql.QueryTagSupport.doStartTag(QueryTagSupport.java:159)
org.apache.jsp.cust_005flogin_jsp._jspx_meth_sql_005fquery_005f0(cust_005flogin_jsp.java:129)
org.apache.jsp.cust_005flogin_jsp._jspService(cust_005flogin_jsp.java:78)
org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:393)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
note The full stack trace of the root cause is available in the Apache Tomcat/6.0.14 logs.
Apache Tomcat/6.0.14I hope this is enough information to get some help with my problem. I can't think of any other information I need to include, and I may have included too much already.
Any help with this problem would be greatly appreciated.You probably don't have the Resource defined in your web.xml. Try adding that.
% -
No Bootable Drive Found, I HAVE UNIQUE SITUATION
Hello everyone, I would really appreciate some help!
I have a MacBook Pro and I've been trying to download Window 7 on it. Basically, I finally got a bootable flashdrive with Windows 7 on it. I have two actually. One made by Bootcamp, (Someone on youtube showed that altering info.plist on Bootcamp makes Bootcamp format ISO on USB) and one made by a Microsoft program from a different computer WITH windows 7 on it. Now, after formatting however, and after the disk partitions itself, the computer restarts and it says No Bootable Drive Found, Insert Bootable Drive and press any key, or something like that. I RESTARTED WHILE PRESSING ALT-OPTION and the only two things coming up are the Mac OS X , and the recovery. Now, the person with the video has the same model computer as mine and it worked for him, SO PLEASE Don't comment by saying it's impossible. Does someone know the problem? I'm sure the USB is bootable.iTheoGamer wrote:
I have the exact same problem!When i alt click there is only Recovery disk and Mac Os x.The system cant detect the usb or ?Please help us.
How do you know you have the "exact same problem"? The original poster did not tell us his model and year Macbook Pro, neither did you. So you may or may not have the same problem. If your Macbook Pro came with an internal optical drive, you must use that to install Windows. Until you know for sure that you have the "exact same problem", start your own thread and provide more details. -
Install windows 7 to s110, no CD/DVD driver found
I just bought Lenovo Ideapad S110 netbook. It already has MeeGoo OS installed but I want to install Windows 7 32 bit. So I made a bootable usb using Windows 7 USB DVD Download Tool and tried to install Windows 7 using my usb. However I have an error "No CD/DVD driver found" I have tried all three usb slots but there still is that problem. All three slots are USB 2.0. Can anyone please help me with it?
Solved!
Go to Solution.Hello and welcom,
That error message can also mean that there is a problem with your original Win 7 ISO or the way the USB flash drive was prepared or the copy to USB. Or perhaps a defective or incompatible USB flash drive. If it is a downloaded ISO, try the download again.
The way I usually make bootable Win 7 installer is this: use DISKPART to prep the drive - list, select, clean, partition, format NTFS, set active. Use 7zip to copy the contents of a downloaded ISO to the flash drive. If you're using a DVD, just copy the contents. In either case use an SP1 DVD.
Maybe you've already tried this.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество -
"no drive found" installing w 8.1 on SSD on Flex 2 15
Dears, I've been going crazy for 1 week, trying and trying everything to make a clean installation of Windows 8.1 64bit on an SSD I bought for my Flex 2 15. I've read thousands of pages of forums, changed 3 different SSDs, but nothing was successfull!(Crucial MX100, Crucial BX100, ADATA SP920SS) every time, during the W8.1 Setup Wizard, it displays "No hard drive found" when I have to choose in which drive to install the OS. My Lenovo Flex 2 15 came with Windows 8.1 pre-installed on a WD hard disk. Please help me.
solved this issue just......changing the SSD I bought a Samsung 840 EVO and it works correctly. Tried Crucial M550 (listed as compatible on Crucial website), Crucial MX1100, ADATA, but nothing with Samsung no issues.
-
Not able to send Email in SOA Suite 12c,getting No matching driver found for delivery type = EMAIL
Hi All,
I am getting following Errror whlie Sending Testing Mail from Human Workflow .
No matching driver found for delivery type = EMAIL
I followed all the steps mentioned in blogs.
Steps that I followed--
1,Downloaded Gmail and Imap Certificate.
2.Imported in Keystore
3.Create a Email driver properties.
ThanDid you resolve this? I am running into the same problem. Not sure if it a configuration issue or an issue with 12c (go figure). I have tried both a blank sender address list and explicitly putting the target address in. Notification mode is set to email. I am using the Notification Test under Human Workflow/Notification Managent. Where else could it be trying to match the driver to EMAIL?
exception.type: ERROR
exception.severity: 2
exception.name: Error status received from UMS.
exception.description: Status detail :
Status type : DELIVERY_TO_DRIVER:FAILURE,
Status Content : No matching driver found for delivery type = EMAIL,
Addressed to : EMAIL:[email protected],
UMS Driver : null,
UMS Message Id : dcb01e3ec0a8456856fe8a439e6ecf3f,
Gateway message Id : null,
Status Received at : Mon Jan 12 00:49:27 EST 2015.
exception.fix: Check status details and fix the underlying reason, which caused error.
> -
Error:No Suitable Driver found for sybase
Jdev 11.1.1.4, ADF BC and ADF Faces
Problem:
Created ADF BC module using Sybase Database connection. While running the module its giving
“No Suitable Driver found”.
Process we have followed:
1) Created a Sybase Database connection in Resource palate. (jar added in classpath jconn2.jar & jTDS2.jar).
Note: Sybase connection is successful :)
2) Use this connection in New ADFBC Appmodule.
3) In Implementation class we are trying to call a Sybase procedure.
4) Then Running the Appmodule using “Run” button.
Approach we have tried after getting the error:
1) Copy jconn2.jar & jTDS2.jar in BC4j/jlib – It ‘s not working.
Any suggestion will be helpful. Thanks in advance.
~AbhijitYou have to configure the SQL flavor and Sybase JDBC driver class in the AM configuration properties:
<tt>jbo.SQLBuilder=SQL92
jbo.sql92.JdbcDriverClass=com.sybase.jdbc2.jdbc.SybDriver</tt>
(The JDBC driver class may be <tt>com.sybase.jdbc3.jdbc.SybDriver</tt> depending on your Sybase ASE version).
You may have to set the AM's property <tt>jbo.sql92.LockTrailer</tt> as well.
Alternatively, you may set the SQL flavor, JDBC driver class and the lock trailer in adf-config.xml. If you are setting these values in adf-config.xml, then you may have to choose "Custom" SQL flavor.
Dimitar -
My iMac decided to stop working after 2 years. I would only get a white screen when powering on. I tried reinstalling the install disk. When asked what drive to install on, no destination drive found. I installed a new hard drive as all indications pointed to a failed hard drive. Still no destination drive found. Does anyone have any idea what the problem might be, or should I just throw this in the circular file.
Sounds like you either have a bad SATA cable, maybe a bad SATA power cable to the HDD, or the logic board's SATA port has crapped out.
The first option is pretty cheap. Just buy a long SATA cable with a right angle connector, and string the new one. If that doesn't fix the problem, the next possibility means replacing some of the PSU cables, maybe even the PSU itself. Not terribly expensive, but extremely annoying, and much harder to find those cables compared to a long SATA cable. If it's the final possibility, part the thing out on eBay or something.
Also, it's LOW-PROFILE circular filing cabinet! -
Database Error "no suitable driver found..." (WIS 10901)
Hello,
have a ZCM 11.2.1 with Primarys (SLES 11 SP1) and external MS-SQL-Database (Win Server 2008 R2).
Month ago, we aditionally setup a Reportingserver in ZCM 11.1 and all worked fine. Made the "ZENworks11SP2_ReportingSP4 patch" and it was OK too. Now, after a few weeks, i wanted to make a report again and get this error when a report is in process:
No suitable driver found for jdbc:sqlserver://zcmdb:1433;DatabaseName=zenworks. (WIS 10901).
In the meanwhile (between last successfully generated report and now, we updated Servers to 11.2 and 11.2.1).
What can i do to troubleshoot this?Schukar,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/ -
When attempting to seliect a File History drive, this message comes up "No usuable drives found, although there is a 1TB external drive connected with four volumes.
Hi Doug,
Make sure the file history and its dependencies service(DCOM Server Process Launcher
and RPC Endpoint Mapper) startup type is "Automatic" and work fine.
Then select another network location or another local disk drive and turn on File history to see if it could work.
If I could work fine, it indicates the file history feature in your computer is without problem. The root should be your location keep a history of your files problem.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Re: Tecra M2 - Vista cannot be installed - No drives found
When I try to install Vista I get the message - "No drives found". What can I do?
I am 68 and not very computer minded .
The fitting of hard drive and memory were fairly easy HELP!!!!!!!!!Respect!!! You are 68 and you are still working with computers!!!
I know many older people who dont know how a computer works and would give up
Anyway. I will try to help you as good as I can
According to the error message the Vista cannot see the HDD Am I right?
Are you able to install the Windows XP OS using the Toshiba recovery CD???
In such case we could check if the HDD is not faulty.
Nevertheless you also try to access the BIOS and could check if the HDD was recognized and listed in BIOS.
To access the BIOS you have to press the ESC while powering up the notebook. -
EJB - no suitable driver found for oracle jdbc driver
this is the exception i got when i run the client:
java.rmi.RemoteException: nested exception is: java.sql.SQLException: No suitable driver; nested exception is:
java.sql.SQLException: No suitable driver
java.sql.SQLException: No suitable driver
at java.sql.DriverManager.getConnection(DriverManager.java:537)
at java.sql.DriverManager.getConnection(DriverManager.java:177)
at com.sun.enterprise.resource.JdbcUrlAllocator.createResource(JdbcUrlAllocator.java:45)
at com.sun.enterprise.resource.PoolManagerImpl.getResourceFromPool(PoolManagerImpl.java:177)
at com.sun.enterprise.resource.JdbcXAConnection.<init>(JdbcXAConnection.java:56)
at com.sun.enterprise.resource.Jdbc10XaAllocator.createResource(Jdbc10XaAllocator.java:66)
at com.sun.enterprise.resource.PoolManagerImpl.getResourceFromPool(PoolManagerImpl.java:177)
at com.sun.enterprise.resource.PoolManagerImpl.getResource(PoolManagerImpl.java:126)
at com.sun.enterprise.resource.JdbcDataSource.internalGetConnection(JdbcDataSource.java:137)
at com.sun.enterprise.resource.JdbcDataSource.getConnection(JdbcDataSource.java:74)
at bmp.TaxEJB.ejbCreate(TaxEJB.java:34)
at bmp.TaxEJB_RemoteHomeImpl.create(TaxEJB_RemoteHomeImpl.java:32)
at bmp._TaxEJB_RemoteHomeImpl_Tie._invoke(Unknown Source)
at com.sun.corba.ee.internal.POA.GenericPOAServerSC.dispatchToServant(GenericPOAServerSC.java:520)
at com.sun.corba.ee.internal.POA.GenericPOAServerSC.internalDispatch(GenericPOAServerSC.java:210)
at com.sun.corba.ee.internal.POA.GenericPOAServerSC.dispatch(GenericPOAServerSC.java:112)
at com.sun.corba.ee.internal.iiop.ORB.process(ORB.java:255)
at com.sun.corba.ee.internal.iiop.RequestProcessor.process(RequestProcessor.java:84)
at com.sun.corba.ee.internal.orbutil.ThreadPool$PooledThread.run(ThreadPool.java:99)
this is the implementation file (TaxEJB):
package bmp;
import java.sql.*;
import javax.sql.*;
import javax.naming.*;
import java.util.*;
import javax.ejb.*;
public class TaxEJB implements EntityBean {
private String stateCode;
private float taxRate;
private EntityContext ctx;
private DataSource ds;
private String dbName = "jdbc/Oracle";
private Connection con;
public void setTaxRate(float taxRate) {
this.taxRate = taxRate;
public float getTaxRate() {
return this.taxRate;
public String ejbCreate(String stateCode, float taxRate)
throws CreateException {
if (stateCode == null) {
throw new CreateException("The State Code is required.");
try {
String sqlStmt = "INSERT INTO TaxTable VALUES ( ? , ? )";
con = ds.getConnection();
PreparedStatement stmt = con.prepareStatement(sqlStmt);
stmt.setString(1, stateCode);
stmt.setFloat(2, taxRate);
stmt.executeUpdate();
stmt.close();
} catch (SQLException sqle) {
throw new EJBException(sqle);
} finally {
try {
if (con != null) {
con.close();
} catch (SQLException sqle) {}
this.stateCode = stateCode;
this.taxRate = taxRate;
return stateCode;
public void ejbPostCreate(String stateCode, float taxRate) {}
public void setEntityContext(EntityContext context) {
this.ctx = context;
try {
InitialContext initial = new InitialContext();
ds = (DataSource)initial.lookup(dbName);
} catch (NamingException ne) {
throw new EJBException(ne);
public void unsetEntityContext() {
ctx = null;
public void ejbActivate() {
stateCode = (String)ctx.getPrimaryKey();
public void ejbPassivate() {
stateCode = null;
public void ejbLoad() {
try {
String sqlStmt = "SELECT stateCode, taxRate FROM TaxTable " +
"WHERE stateCode = ? ";
con = ds.getConnection();
PreparedStatement stmt = con.prepareStatement(sqlStmt);
stmt.setString(1, stateCode);
ResultSet rs = stmt.executeQuery();
if (rs.next()) {
this.taxRate = rs.getFloat("taxRate");
stmt.close();
} else {
stmt.close();
throw new NoSuchEntityException("State Code: " + stateCode);
} catch (SQLException sqle) {
throw new EJBException(sqle);
} finally {
try {
if (con != null) {
con.close();
} catch (SQLException sqle) {}
public void ejbStore() {
try {
String sqlStmt = "UPDATE TaxTable SET "
+ "taxRate = ? " + "WHERE stateCode = ?";
con = ds.getConnection();
PreparedStatement stmt = con.prepareStatement(sqlStmt);
stmt.setFloat(1, taxRate);
stmt.setString(2, stateCode);
if (stmt.executeUpdate() != 1) {
throw new EJBException("Object state could not be saved");
stmt.close();
} catch (SQLException sqle) {
throw new EJBException(sqle);
} finally {
try {
if (con != null) {
con.close();
} catch (SQLException sqle) {}
public void ejbRemove() {
try {
String sqlStmt = "DELETE FROM TaxTable WHERE stateCode = ? ";
con = ds.getConnection();
PreparedStatement stmt = con.prepareStatement(sqlStmt);
stmt.setString(1, stateCode);
stmt.executeUpdate();
stmt.close();
} catch (SQLException sqle) {
throw new EJBException(sqle);
} finally {
try {
if (con != null) {
con.close();
} catch (SQLException sqle) {}
public String ejbFindByPrimaryKey(String primaryKey)
throws FinderException {
try {
String sqlStmt = "SELECT stateCode "
+ "FROM TaxTable WHERE stateCode = ? ";
con = ds.getConnection();
PreparedStatement stmt = con.prepareStatement(sqlStmt);
stmt.setString(1, primaryKey);
ResultSet rs = stmt.executeQuery();
if (!rs.next()) {
throw new ObjectNotFoundException();
rs.close();
stmt.close();
return primaryKey;
} catch (SQLException sqle) {
throw new EJBException(sqle);
} finally {
try {
if (con != null) {
con.close();
} catch (SQLException sqle) {}
public Collection ejbFindInRange(float lowerLimit, float upperLimit)
throws FinderException {
try {
String sqlStmt = "SELECT stateCode from TaxTable "
+ "WHERE taxRate BETWEEN ? AND ?";
con = ds.getConnection();
PreparedStatement stmt = con.prepareStatement(sqlStmt);
stmt.setFloat(1, lowerLimit);
stmt.setFloat(2, upperLimit);
ResultSet rs = stmt.executeQuery();
ArrayList list = new ArrayList();
while (rs.next()) {
String id = rs.getString(1);
list.add(id);
stmt.close();
return list;
} catch (SQLException sqle) {
throw new EJBException(sqle);
} finally {
try {
if (con != null) {
con.close();
} catch (SQLException sqle) {}
this is the setting in resource.properties:
jdbcDataSource.5.name=jdbc/Oracle
jdbcDataSource.5.url=jdbc\:oracle\:thin\:@nicole\:1521\:NICOLE
jdbcDriver.1.name=oracle.jdbc.driver.OracleDriver
this is my classpath setting:
%J2EE_HOME%\lib\j2ee.jar;%J2EE_HOME%\lib\system\cloudscape.jar;%J2EE_HOME%\lib\system\cloudutil.jar;%J2EE_HOME%\lib\cloudscape\RmiJdbc.jar;%J2EE_HOME%\lib\system\classes12.jar;.
since i already declare classpath for oracle JDBC Driver (classes12.jar), why the program still can't found the oracle.jdbc.driver.OracleDriver? please help. thanks.Hi,
I m trying to connect ORACLE9i using JSP.But i encounter the error java.sql.SQlException no suitable driver found.My code is as follows.
<html>
<head><title>oracle</title></head>
<body>
<%@ page language="java"%>
<%@ page import="java.sql.*" %>
<%
String eid=new String();
String en=new String();
try
try{
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
catch(ClassNotFoundException cnfe)
out.println("Failed to load Jdbc Odbc driver");
try{
Connection con = DriverManager.getConnection("jdbc:oracle:thin@localhost:1521:ORACLE9I","scott","tiger");
Statement ps = con.createStatement();
try{
ResultSet rs = ps.executeQuery("select * from empDetails");
while(rs.next())
out.println(rs.getString(1));
out.println(rs.getString(2));
rs.close();
}catch(SQLException se)
out.println(se);
ps.close();
con.close();
catch(Exception e)
out.println(e);
catch (Exception e){
out.println(e);
%>
</body></html>
Pls anyone give me a solution.Its really urgent.
Maybe you are looking for
-
Z68 WIN 7 will not boot after setting drive BIOS from IDE to SATA
MSI Z68MA-ED55 (B3) Motherboard Windows 7 Ultimate 64 bit OS SATA III Solid State Drive with greater than 500 MB/s throughput After installing WIN7 and all my Applications programs I noticed in the BIOS that the driver for the SSD did not properly se
-
ADF/JSF page loads when any command button is clicked
Hello All, I am lost in the ADF/JSF page flow (using Jdev 10.1.3). Following are the tags (in order) in my page; (WHEN THIS PAGE LOADS, IT GOES TO THE DATABASE TO GET VALUES (for the drop down lists that will appear on the page); THIS SHOULD HAPPEN J
-
Navigating to another component based on business role
Hello Experts, I have a hyperlink created for Lead No to navigate to Lead Overview page from my Z component. How do I restrict this navigation based on business role? Thanks in advance, Regards, Surekha.
-
Ruler Doesn't allow me to choose a "place" that's not a point on the ruler.
Hi, I'm having an issue, I'm new to illustrator. I'm busy with an Image, now i could use trace, but learning how to use the illustrator tools etc. The Question is, i have placed a Guide Line on the art-board ruler, its not on a point on the ruler (5c
-
Unable to select "repair disk"
My system is running slow. I am able to verify permissions and verify disk but I'm not able to select "repair disk".