DAC add to w_day_d dimension

Well it seems time is running out on the date dimensions.
The max day is on 12/30/2010, so how to extend the dates to 2015 on all date dimensions using DAC?
thanks for the help!1

By default most of the SIL jobs for populating the Day dimension are not run in the incremental apart from the update job which takes the data form W_DAY_D itself (this is how it is 7.9.5 not sure if it behaves diff in 7.9.6)
The best option and probably the easiest one would be to insert it manually.
* Remember you should not trunacte and reload just this table as it would screw up the wids and your warehouse ;)

Similar Messages

How to add a new dimension in ASO cube without losing all data

Hi,
I have an ASO cube with 18 dimensions and I want to add a new one (regular). When I add this new dimension it asked me that the all data has to cleared before the restructure can take place. If I click yes then I would lose all data regardless of the fact if I have a level0 export or not. Because when I tried to reload the export back into the cube it gave me an error cause all the dimensions were not present in the export. Does anyone know how would I be able to accomplish this task?
Thanks
fikes

You can try this work around solution.
1) Export Lev0 data
2) Clear the cube
3) Add new dimension Regular.
4) Add a default member Reg00 in the new dimension and save.
5) Open the Lev0 data in a text editor, Insert "Reg00" in the begining of the file and Enter.
6) Lev0 file will have first record "Reg00" and the remaining export file will be from the second record.
7) Load the modified file with out rule file.
You can verify that all your history data will be loaded w.r.to the Reg00 of the New dimension Regular.

Multi-provider can't add one time dimension

I have created one multi-provider, saved. I can't activiate it, so I try to add one time dimension characterstic,. for example :
Calendar Year/Month
I right click the "Time" dimension, only I can change description. the " insert" menuitem is greyed out. so how to add one time characterstic?

thanks.
during activiation of multi-provider, another error below:
Assignments for InfoObject 0VALUE_LC have not yet been maintained -> Long text
Message no. R7645
Diagnosis
The MultiProvider definition contains an InfoObject that has not been assigned to the relevant InfoProviders.
Procedure
Choose Identification and highlight the assignment for InfoObject 0VALUE_LC, or remove the InfoObject from the MultiProvider.
but I can't find "identification" , where is it?
Edited by: Splinter on Nov 3, 2011 9:08 AM

Error VLD-0370 add a new dimension to a cube

Hello together!
I have a little Problem with my OWB 11.2.0.3 on a new machine. We run OWB 11.2.0.3 on different machines, but on our new machine I have a little problem with ROLAP -Dimensions. I imported my Rolap Dimensions an Cubes from a other machine, all works fine (validate, deploy) but when I genereate a new ROLAP - Dimension the wizzard, vallidation ok, and add it to the cube. I get VLD-0370 error.
VLD-0370: Für Cube CUB_MEMBER_TRANSACTION_R, Dimension TEST_DIM ist die Referenz nicht an Spalten einer Tabelle oder aktualisierbaren View gebunden.
Eine Cube-Dimensionsreferenz muss an Spalten einer Tabelle oder einer aktualisierbaren View gebunden werden.
It must be something like this:
VLD-0370:For CUB_MEMBER_TRANSACTION_R Cube, Dimension TEST_DIM the reference is not bound to columns in a table or updatable view.
A cube dimension reference must be bound to columns of a table or updatable view.
I cannot create a new dimension ans add it to the cube on the new machine. Don't know why. All locations are fine.
A problem is, I don't find a list or something like that for the VLD-xxxx with hints what to to like the ORA-xxxx.
Thanks a lot from Berlin
Michael

Hi Michael,
The cube has a table related, you have added the dimension to the cube, but the table needs a new column with a foreign key to the table-dimension. When you are modifying an existing cube this is not automatic, you have to add the column and foreign key manually.
Regards
ANA GH

Add member to dimension in the outline

 I found a problam when i update a dimension using script MaxL and excecute in essmsh I Wrote script as follow : spool on to 'c:\hyperion\log.txt'; login $1 $2 ; alter system load application 'Bank'; alter application 'Bank' load database 'Finance'; import database 'Bank'.'Financial' dimensions connect as 'sa'identified by 'sa' using rules_file 'Dim_Year' on error append to'c:\Hyperion.err'; spool off; exit; But when I run using bat file, I found an error in my log.txt asfollow : OK/INFO - 1053012 - Object [A] is locked by user [ADMIN]. ERROR - 1241101 - Unexpected Essbase error 1054036. OK/INFO - 1053013 - Object [A] unlocked by user [ADMIN]. Help me Please!!, Regards, Wahyu 

Wayhu the MAXL you posted spelled the database name differently in its two appearances. When you loaded the database, it was Bank.Finance, when you did the dimbuild you were loading to Bank.Financial. One of these is either wrong or spelled wrong for the purpose. I've never tried to use a 9 character database name like "Financial." In teh past, operating system and Hyperion limited us to 8 character names, so I've stayed with the short names out of long-established habits. The lock and unlock messages are normal, they will show up even when things work well. (The OK/INFO flag suggest that they are just process monitors and not problems.) The "ERROR - 1241101 - Unexpected Essbase error 1054036." is not in the error database that I have. One of my continual problems is not having a reasonable, annotated error listing. Neither error number shows up in the KnowledgeBase either. Here's how I would write the code: import database 'Bank','Finance' dimensions connect as 'sa' identified by 'sa' using server rules_file 'Dim_Year' on error write to 'c:\Hyperion.err'; You need to specify server in the rules file definition. If you use local, you will need a file path. I'd recommend using the write rather than append to error file and name an error file for the process. Then you can check to see if the error file exists if you want to monitor progress or problems. The other problem might be related to database connection. Make certain that all of the servers and clients that may run the code have the same ODBC connection setup and name. This includes the system running your EAS server as well. Hope that this helps.

Add members to dimension

Hello,
I want to give a user access to input members in some dimensions but I don't want to give him access to admin panel. How can I organize it? Is it possible?
Regards,
Veronika.

Hi,
One more suggestion would be to have a file, proceess or lookup table where users can submit the new members and then you can create a dimension using SSIS process.
We have done this many times, You can also automate this process.
Hope this helps.
Sam

Easy way to add doc dimensions to slug area?

Does anyone know of an automated way to add the documents dimensions to the slug area? I've tried searching around but haven't found any results more recent than 2009. I'm using CS4.
Thanks,
Mel

Sure,
http://www.flexer.info/2008/02/07/very-first-flex-preloader-customization/
Johnny
Please rate answers.

Add a dimension in an ASO app. Loading problem

Hi guys.
I have an ASO application and I need to add a scenario dimension. this new dimension will have 2 members real, forecast. Currently I have 6 different dimensions, and i need to export all current database info and reload it with the intersenction with the member real of the new dimension.
The problem consists in that i cant get an export file with column format, since essbase doesn't alllow it for aggregate databases, so i can't just aggregate one column to a rule file for solving the problem. The ASO default database export puts continuously all dim member names intersections and the asssociated data, separated by comma, and so on, so i can't use a rule file to treat the essbase native export file, as far i know.
I thought that with a report script with all dimensions in rows will help me, since it's the way to get all intersections and data in columns, but the problem is after a while, the admin services stops the report generation stating that there isn't enough cache memory in the app, since the database is too big. I increased from 32k to even 2056k the cache size, and the problem still continues, so I really accept any suggestion in order to solve the problem.
I broke the report in just smaller reports, by years, and by accounts, letting the other dims in level 0, and with just one account member and 1 year, the report tooks about 3 hours to generate it, and there would be be about 60 reports similar with similar times, so it's not an economical and effective solition..
I wonder if there anyway that you know thaat can help us.
Thanks in advance four your comments.

Thanks Glenn for you answer.... I got another idea using part of your solution. Did an export of the current cube, create another ASO cube with similar outine, but added the new dimension and memebers real and forecast, modified the export file adding on the first line the word "real" of the new member, and loaded the modified export in the new cube.... and worked!!
Thanks to all

Add a dimension - Problems with journal

Hi,
We need to add to a dimension to an existing application that has journal defined.
We have done the following steps:
1) We add and assign the new dimension to the application succesfully.
2) We try to create within the journal wizard, the new journal template adding the new dimension and we receive the following error "The system cannot create journal template".
We wanted to know, if is posible to generate manually the template or what is the best practice to add a new dimension in an application that has journals.
Thanks in advance.
Regards,
Juan

Hi,
try one of these:
Solution1:
This error will occur if the query files folder is missing from each of the
problem applications. To resolve, simply copy the query file folder or
create one under each application and run through the journal wizard again.
Solution 2:
Reason:That issue may arise if native Excel is configured to open less than three
sheets by default on the client machine used to build the template.
Solution:
You can modify the Excel settings:
- In Excel 2003, select Tools, Options and click General in the Options
dialog box. Then change the setting for "Sheets in new workbook".
- In Excel 2007, click on the Office button and then on the Excel Options
button. In the Popular tab, "When creating new workbooks", please change
the "Include this many sheets" setting.
If it is different than 3, please set it back to 3 and test to build your
journal template again.
Solution 3:
Reason:The journal template couldn`t be created if the application
have more than 7 dimensions which are set for secure.
Soln: recommend setting dimension for secure as less than 7.
thnks.

Deploying app.view in BPMA does not add dimensions/members to application

Hello,
I've searched the forum for a solution to this problem, but I couldn't find any.
Problem:
I'm working on Hyperion Planning 9.3.1.0.66, EPMA version is 9.3.1.0.0.73, Workspace version is 9.3.1.0.0.248. I've created a classic application that was later upgraded. Now, I need to make some changes to dimensions (add some generic dimensions) and add some members to an existing dimension. Everthing is set in workspace and added to the application view. Validation of the application view is successful, so is the deployment (both create outline and refresh outline were tested, in all combinations), however when I open the application, or verify the outline in Essbase, there is no changes in the outline (no new dimensions/dimension members added, etc.)
Does anyone know the reason for such application behaviour?
Is there any solution/fix to solve the problem?
Best regards
Marcin Stawny

Hi,
I would definitely recommend patching EPMA and Planning to the latest patches, many issues have been addressed with EPMA and it is should always be the first steps if you have issues.
You can download the following patches from Metalink3
8211868 - System 9 Release 9.3.1.1.10 Service Fix
7305465 - EPMA 9.3.1.1.5 Service Fix
7272558 - EPMA 9.3.1.1.4 Service Fix
7209507 - EPMA 9.3.1.1.3 Service Fix
7161248 - EPMA 9.3.1.1.2 Service Fix
7227802 - EPMA 9.3.1.1 Service Pack
7110941 - EPMA 9.3.1.1.1 Service Fix
They include readmes instructing on how to patch.
This maybe related to your issue which was fixed in patch 9.3.1.1.6
7117173 - You cannot incrementally deploy Oracle’s Enterprise Performance Management Architect (EPMA) applications to Planning.
Cheers
John
http://john-goodwin.blogspot.com/

Unable to add Dimension thru Javascript

I am connected to an Essbase cube thru IR. I am trying to change the selected Toplabels and Sidelabels thru Javascript. I have a dimension called FY_Period. The structure of FY_period is
FY_Period
-----Q1
---------Jan
---------Feb
---------Mar
-----Q2
---------Apr
---------May
-So on ....
I am writing the following script in Dashboard
Documents["*****.bqy"].Sections["Query"].TopLabels.Add("Gen3,FY_Period"); This DID NOT WORK
Then I wrote
Documents["*****.bqy"].Sections["Query"].TopLabels.Add("Jan"); This DID NOT WORK either.
How do I specify the member name dynamically ?
Any help will be appreciated.
Thanks
Debasish

First Thanks Wayne for your sugegstions and help.
I found part of the solution. I was using the Add methos only. I found I need to add the Dimension name first then I could use the Add for the dimension to add members. I had different impression reading the help file.
Documents["***********.bqy"].Sections["Query2"].Columns.Add("FY_Period");
Documents["***********.bqy"].Sections["Query2"].Columns["FY_Period"].Add("Q2.Apr",bqOLAPSelectorMember,false);
But now the issue is I have both Dimension FY_Period and member Apr is selected in the query statement. I do not need the FY_Period. All I need is the "Apr" member. I am not able to delect the FY_Period programmatically.

Planning Unit add extra dimension

Hi,
In Planning unit along with Scenario, Version and Entity can we have one extra dimension? I have another custom dimension named Department with security and want to have workflow against both Entity and Department. I am using EPM 11.1.2. If possible where can I define that.
Thanks for any help.
Dev

If you edit your planning unit hierarchy there should be an option to add a secondary dimension so you should be able to add department.
Cheers
John
http://john-goodwin.blogspot.com/

How to add a new view in Factsheet to collect data from R3

Hi Experts,
I need to add a new view in Account Factsheet called 'Open Delivery data'
which will collect the delivery data from R3 system.
As I know we have two Function Modules (at CRM) 'CRMT_ERP_FACT_SHEET_RETRIEVE'
(at R3) 'CRM_CCKPT_EXPORTSUMMARY'
All We need to do is create view which calls the data from R3 Via these modules.
How should I proceed.
Is this relevent steps :-
http://wiki.sdn.sap.com/wiki/display/CRM/Howtodisplayaz-tableinanassignmentblock
Regards,
Ram

Hi Sandeep,
To add a new currency in Metadata, just add in Currencies dimension, and to add in Data form-just send the script what you are using as of now for rest of the currencies, or follow the same steps as specified above. or just add the script A#CLORATE.w#Periodic.C2#XYZ in rows of your data form (where XYZ- is the new currency).
To add a new location in FDM login to FDM web client- click on Metadata--> locations and select the Controls review location where you want to add the data load location, right click and add the new location.

Adding a New Dimension to a CUBE

Hello
Being in new at Oracle OLAP...
If I need to add a new dimension, SHOULD I RECREATE the cube entirely again??
Is not there any other way??
Regards

Each cell in a cube is referenced by a dimension. Think of it as pointers to cells in a multi-dimensional array.
So when you add or remove a dimension, what should happen to all those cells.
In a way you are breaking the cube.
Since cube data is loaded from a table, you can always re-load your cube after adding or removing a dimension.
Dimensions are not added/removed frequently, once the design is finalized. You may add a new hierarchy to existing dimensions, which is done more frequently compared to adding a dimension. After adding a new hierarchy, you just have to re-aggregate cube data and not re-load from relational source.
Cubes are created for reporting, and can be deleted/recreated or truncated - monthly, quarterly or yearly - for various reasons.
Your source transactional detailed data should be in one (or more) fact tables and should never be deleted.
Is there any "operational" concern in a Production environment, because of which you are asking this question?
One trick could be: to create the new cube (with more dimensions or less dimensions than the original cube) and then COPY DATA from original cube into that new cube.
But it may take the same amount of time as re-loading the new cube from the relational source.

How to Add a new Currency in HFM Data form and grid (Rates)

Hi Gurus,
Am very new to this forum.
Can someone explain me how to add a new currency to the existing data for or grid in the Workspace.
Regards,
Vinod

Hi Sandeep,
To add a new currency in Metadata, just add in Currencies dimension, and to add in Data form-just send the script what you are using as of now for rest of the currencies, or follow the same steps as specified above. or just add the script A#CLORATE.w#Periodic.C2#XYZ in rows of your data form (where XYZ- is the new currency).
To add a new location in FDM login to FDM web client- click on Metadata--> locations and select the Controls review location where you want to add the data load location, right click and add the new location.

DAC add to w_day_d dimension

Similar Messages

Maybe you are looking for