DAC Error: Connecting to integration service
Hi all,
I have followed all the steps as per the install guide. I went through the forum too but still have the below error. Able to connect to Repository successfully. But error while connecting to Integration service.
Failure connecting to "_______"
=====STD output=====
The command Pingserver is deprecated. Please use command [pingservice] in future.
Warning: Lost server connection
Error: Cannot connect to Integration service[host:portno]
======Error Output=====
There is one small change in the config.bat file. in the set JAVA_HOME Instead of using the path "C:\Program Files\Java\jdk1.5.0_07" I have used "C:\orahome\10gR3_2\jdk" since it has no spaces.
I am not sure if there is any problem with this path since the DAC server and client are running properly.
Also, when I run
C:\Documents and Settings\Administrator>pmcmd pingservice -s HostName:6001
it gives error:
Informatica(r) PMCMD, version [8.1.1], build [600.0831], Windows 3
Copyright (c) Informatica Corporation 1994 - 2006
All Rights Reserved.
Invoked at Wed Aug 11 14:17:05 2010
WARNING: Lost server connection.
ERROR: Cannot connect to Integration Service [HostName:6001].
Completed at Wed Aug 11 14:17:46 2010
In environment variables - I have added Informatica bin paths and have also added INFA_DOMAINS_FILE.
I have read about the 2 EBFs for informatica to be extracted. Do I need them? I am using OBIApps 7.9.5 and Informatica 8.1.1.
Am not sure what is wrong now.
Any help is greatly appreciated.
Thanks.
Edited by: user522729 on Aug 11, 2010 2:42 AM
The integration service was running on a different port. Used the correct port and it was working.
Edited by: user522729 on Aug 16, 2010 4:40 AM
Similar Messages
-
Error while integarting the DAC with the Informatica Integration services
Hi Experts,
I am setting up the BI APPS. I am following the documentation provided by oracle. Everything went on smoothly but when when I am trying to integrate the DAC with the Integration service created in informatica it is giving me the following error:
Informatica(r) PMCMD, version [8.6.0 HotFix4], build [272.1017], Windows 32-bit
Copyright (c) Informatica Corporation 1994 - 2008
All Rights Reserved.
Invoked at Mon Jun 01 14:10:47 2009
[DOM_10033] [DOM_10033] Service [10.136.51.183] does not exist in domain [Domain_ZZDAP2FLM951].
ERROR: Cannot connect to Integration Service [10.136.51.183].
Completed at Mon Jun 01 14:10:48 2009
=====================================
ERROR OUTPUT
=====================================
Important Obeservation: When I am trying to connect the repository service from DAC it is connecting successfully.
Can anyone please provide me the solution for this. It is really urgent.
Thanks in advance.
SatyabratHere is what you need to do... there are some gaps in the documentation for 7.9.6 with infa 8.6:
1) In infa 8.6 there is no repository and informatica server, instead you have repository service and integration service
2) make sure you note down the name of the repository service and integration service when you do the post install of the informatica install
3) when you try to register Infa repository in DAC, make sure you use the (hostname/services) as the name of the infa integration service,
and in repostory name use the name of the repository service and not Oracle_BI_DW_base....
if you still have errors upload or email ([email protected]) the DAC config screens -
BIAPPS 7.9.5.1 Failure connecting to integration service
Business Intelligence 10.1.3.4.1
Biapps version 7.9.5.1
Informática Powercenter 8.1.1
After completing the installation according to the manual we have copied the hibernate libraries in DAC directory:
http://download.oracle.com/docs/cd/E10783_01/doc/bi.79/e10742/anyinstadmwininstall.htm#i1105233
And also copied the Emergency Bug Files in Informatica:
Informatica Session Completing Successfully, but Still in Running Status
We have tried with Informática Powercenter 8.1.1 without Service Pack, and also applying the SP5, but we are getting the same error in DAC while making the Test Connection in both cases:
"Failure connecting to "integracion_informa"
STD OUTPUT
Informatica(r) PMCD, version [8.1.1 SP5], build [135.0129], Windows 32-bit
Copyright (c) Informatica Corporation 1994 - 2008
All Righst reserved
Invoked at Fri Apr 16 13:29:52 2010
The command: [pingserver] is deprecated. Please use the commando [pingservice] in the future.
WARNING: Lost server connection.
ERROR: Cannot connect to Integration Service [integracion_informa:4006]
Completed at Fri Apr 16 13:29:52 2010
ERROR OUTPUT"
cmd window:
"16-abr-2010 13:29:52 com.siebel.analytics.etl.client.util.DataVerification giveWarning
INFO: Unknown verification type!
16-abr-2010 13:29:52 com.siebel.analytics.etl.client.data.dataobject.UpdatableDataObject createUpdate
INFO: 0 calls to database avoided
DAC Command Line Utility Invocation"
There´s no other information about the error. Test connection for repository is correct.
We have done the installation many times, restarted the computer, restarted informatica services, restarted DAC server, verified in the Powercenter Admin Console that both (integration and repository) services are up...
Days ago, we have succesfully installed Biapps 7.9.6.1 and loaded PeopleSoft 9.0 data, but now we are trying to load PeopleSoft 8.8 and we are obligued to uses Biapps 7.9.5.1, because 7.9.6.1 have no connection with PeopleSoft 8.8.
Thanks in advance.
Edited by: user11179355 on 19-abr-2010 1:46We have upgraded this repository to connect to it using DAC version 10.1.3.4.1 and we noticed that in Setup-Informatica Servers all the fields except Domain, had the values we entered using the previous version of DAC. This makes sense, because in the previous version of DAC (Biapps 7.9.5.1) you cannot enter the domain name.
If we try to connect to it without filling this field we get the same blank error. But if we fill it with the correct domain name the test ends succesfully. So if we could put the domain name in DAC Biapps 7.9.5.1 we might make it work.
Is there any place where you can put the domain name value in this version?
Does anyone know the table where this value is stored? -
We have SSIS installed on a machine that is not part of a cluster but it is accessible by the cluster.
Our job we have running on the cluster is failing with the following error:
Error: 2014-01-31 09:14:37.52 Code: 0xC000F427 Source: SCR - DP1 Connections
Description: To run a SSIS package outside of SQL Server Data Tools you must install SCR - DP1 Connections of Integration Services or higher. End Error
Any advice or information on how to resolve this would be great.
Many Thanks.Hi NessaBella,
Integration Services service is not a cluster-aware service, and does not support failover from one cluster node to another. Therefore, in a clustered environment, Integration Services should be installed and started as a stand-alone service on each node
in the cluster.
Based on the error message, it seems that SSIS is not installed on the cluster node on which the job was running. Although SSIS is installed on a machine that is not part of the cluster and can be accessed by each cluster node, the SSIS service installed
on a remote server cannot be used a cluster node. So, please install the shared feature SQL Server Integration Services on each cluster node. Besides, if certain packages need to run in 32-bit mode in certain jobs and the SQL Server installed is 64-bit version,
you also need to install BIDS/SSDT on the cluster node to get the 32-bit runtime of SSIS.
References:
Integration Services (SSIS) in a Cluster
Loading and Running a Remote Package Programmatically
Regards,
Mike Yin
TechNet Community Support -
DOM_10079 error while starting integration services of Informatica 9.0
Hi Team,
We are getting error DOM_10079 while starting integration services of Informatica and integartion services not started . Repository service is running fine.
Thanks in Advance ,
Prashant SalveThis info is not sufficient to tell the reason.
Check your domain logs in admin console and see the error messages. Post your domain logs
Make sure integration services is connected with repository and also the code page -
Informatica work flow not connecting to integration service
Hi I am OBIEE admin, i am having the following error when i am trying to run workflow manually.
Informatica work flow not connectied to integration service,
Pls help me asapDo this:
Open Workflow manager or If it is already opened...then disconnect all the folders...
1. Click on the folder you want to connect
2. Go to 'Service' tab and select "Assign Integration Service"
3. This will open "Assign Integration Service" window from where you can choose the Integration Service and can assign the workflows or all workflows. Click "Assign" button to assign the selected Integration Service.
Now connect to the folder and you can run the workflows.
Hope this helps and please mark if it does. :) -
So I got this new app 3 months ago called Black ops call of duty : zombies. And I LOVE it!! But every time I try to join an online game, wether it be map vote, single map, 2-4 players, restarting my phone... What happens is it takes me to the gamecenter connect page, where it connects me with another player, but after a few seconds, it takes me into the multiplayer lobby, and then pulls up a message saying "connecting to online services" and it does that for a minute before saying "error joining room" and makes me quit the online game, leaving the other person kicked off the server because the other person (me) left or was kicked, I do NOT want to jailbreak my iPhone for this problem, and I am very experienced with iPhones and other electronics, both apple and Microsoft, if there is anyone who knows how I can fix this problem WITHOUT jail breaking my phone or paying money.. (Maybe ill pay money, it depends...) then Please tell me! It has done this to me EVERYTIME for the past 3 months, and still does... So please help!
I don't think it's an issue on the phone. you may need to contact the app developer. Make sure that the app you are using is not associated on your game center account.
-
IS Error Member load terminated with error in Essbase Integration Services
Hi all,
Please help!
When i am trying to build the outline of a cube using Essbase Integration Services 9 it gives me the following error:
IS Error Member load terminated with error
Any replies - appreciated.
Thanks in advance.
Avishek Sarkar.Hi Avishek,
Can you please post the EIS log contenets when error is coming? Also what are the options are you selecting when loading members?
Atul K, -
Dear all,
I have Cisco Indentity Services Engine, that connected to Active Directory. When I test connection detailed,
the result is error, said:
Test Connection Results
This dialog shows the detailed logs for the operation for: idsv0018.
Status: FAILED: Global Catalog port status error.
Can anyone help?
I believe, because this error, I can't search group of AD, at Cisco ISE.
FYI: the connection from Cisco ISE to AD, joined with successful result.
Thanks,
JerriIt's clears that when ISE tries to find the GC using the _gc._tcp. DNS query. It doesn't find that information on the Domain controller. The GC information is missing on the DC.
gc._tcp.DnsForestName
Allows a client to locate a Global Catalog (gc) server for this domain.
Jatin Katyal
- Do rate helpful posts - -
Help, error connection Cisco Identity Services Engine with AD.
Dear all,
I have Cisco Indentity Services Engine, that connected to Active Directory. When I test connection detailed,
the result is error, said:
Test Connection Results
This dialog shows the detailed logs for the operation for: idsv0018.
Status: FAILED: Global Catalog port status error.
Can anyone help?
I believe, because this error, I can't search group of AD, at Cisco ISE.
FYI: the connection from Cisco ISE to AD, joined with successful result.
Thanks,
JerriHello Jerri,
Please follow these steps:
1. Make sure that ISE can connect to the Global Catalog (by Default it is Domain Controller) on the following ports (see table below)
2. Check Windows Event Viewer > System Events on your Domain Controller and locate any errors / warning. Note down Event ID
3. If there are any errors, other client computers in your AD domain are likely to experience problems locating User groups, Printers etc.
4. If the above steps are confirmed, then you need to fix .msdcs.ad-domain.xyz and the records, on your primary DNS (Master Domain Controller by default)
5. To fix those records, you may refer to the following link for more guidance on how to do it. Or your Windows AD Administrator should fix it
How DNS Support for Active Directory Works
http://technet.microsoft.com/en-us/library/cc759550
Otherwise let me know about the detail on Event IDs you notice in your Windows Event Viewer
Service Name
UDP
TCP
LDAP
3268 (global catalog)
LDAP
3269 (global catalog Secure Sockets Layer [SSL])
LDAP
389
389
LDAP
636 (SSL)
RPC/REPL
135 (endpoint mapper)
Kerberos
88
88
DNS
53
53
SMB over IP
445
445 -
Can't remote connect to Integration Services 2008 r2 with 2012 Management Studio
I am getting a Connect to Server error "Class not registered" followed by the trying to connect to 2005 information. It is not a named instance. I don't get the error when connecting with Management Studio 2008. Any ideas. Everything else is
all set up properly..Can you try this workaround and see if it works?
http://www.ssistalk.com/2012/03/21/connecting-to-a-pre-sql-2012-ssis-instance-with-sql-2012-ssms/
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
Register Integration service in DAC.
Hi all,
I am getting this message while trying to register the Informatica Integration Service in DAC. On the other hand the repository server registration is succcesful in DAC. I have the INFA_DOMAINS_FILE,INFA_HOME environmnet variables set already and the INTEGRATION and REPOSITORY services are up and running. I have added the Informatica/server/bin path to the PATH variables too.
I have entered the relational connection in workflow manager and assigned the integration services to workflows also. I have checked the port, Integration service seems t to be running on 4006 port. Can any one help please..
Failure connecting to "INFORMATICA_DW_SERVER"!
=====================================
STD OUTPUT
=====================================
Informatica(r) PMCMD, version [8.6.1 HotFix6], build [319.0622], LINUX 64-bit
Copyright (c) Informatica Corporation 1994 - 2009
All Rights Reserved.
Invoked at Thu Dec 17 18:12:44 2009
The command: [pingserver] is deprecated. Please use the command [pingservice] in the future.
WARNING: Lost server connection.
ERROR: Cannot connect to Integration Service [Integration:4006].
Completed at Thu Dec 17 18:12:44 2009
=====================================
ERROR OUTPUT
=====================================hello any news about the solution to this issue?? I would appreciate sharing the solution just in case it has been resolved.
Regards to you all.. -
ETL Failure - Integration Service Error
Hi all,
Wondering if anyone has seen this error before.
ETL failed with this error message:
ERROR: Workflow custom workflow has not run on this Integration
Service before.
Nothing has changed with this workflow which has been running without error. We only have one integration service.
Thanks for reading.2013-07-12 04:10:06.14 INFORMATICA TASK:ABC_Custom_SIL:ABC_SIL_Special_Programs:(Source
: FULL Target : FULL) has started.
ANOMALY INFO::: Error while executing : INFORMATICA TASK:ABC_Custom_SIL:ABC_SIL_Special_Programs:(Source
: FULL Target : FULL)
MESSAGE:::
Irrecoverable Error
Error while contacting Informatica server for getting workflow status for ABC_SIL_Special_Programs
Error Code = 3:An error occurred in starting or running or stopping the
workflow or task.
Pmcmd output :
=====================================
STD OUTPUT
=====================================
Informatica(r) PMCMD, version [9.1.0 HotFix2], build [357.0902], LINUX 64-bit
Copyright (c) Informatica Corporation 1994 - 2011
All Rights Reserved.
Invoked at Fri Jul 12 04:10:28 2013
Connected to Integration Service: [INT_PROD].
ERROR: Workflow [ABC_SIL_Special_Programs] has not run on this Integration
Service before.
Disconnecting from Integration Service
Completed at Fri Jul 12 04:10:29 2013
=====================================
ERROR OUTPUT
=====================================
Re-Queue to attempt to run again or attach to running workflow
if Execution Plan is still running or re-submit Execution Plan to execute the
workflow.
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.IrrecoverableException
com.siebel.analytics.etl.etltask.InformaticaTask.doExecute(InformaticaTask.java:183)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:411)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:307)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:214)
com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:586)
com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
java.lang.Thread.run(Thread.java:662)
(Number of retries : 1)
pmcmd startworkflow -sv INT_PROD -d Domain_lx-xxxxx-p02p -u Administrator -p
**** -f ABC_Custom_SIL -paramfile
/opt/hrinfo/informatica/powercenter9.1/server/infa_shared/SrcFiles//DataWarehouse.DataWarehouse.ABC_Custom_SIL.ABC_SIL_Special_Programs.txt
ABC_SIL_Special_Programs
2013-07-12 04:10:29.207 INFORMATICA TASK:ABC_Custom_SIL:ABC_SIL_Special_Programs:(Source
: FULL Target : FULL) has finished execution with Failed status. -
Unable to connect to Informatica Service
Hello all,
I installed the 'new' OBIEE Suite with OBI 10.1.3.3.3, OBI Apps 7.9.5 and Informatica powercenter 8.1.1 and I am facing following problem.
When I configure the connections to the informatica server in the DAC client and I test the connection, I am able to succesfully connect to the informatica repository but I fail to connect to the informatica server.
I added the path to pmcmd and pmrep to the Windows Path environment variable and I added a new variable INFA_DOMAINS_FILE which is pointed to the file which contains a description of the available domains.
I just get following error: Cannot connect to integration Service.
Can anyone please help me out?
Thank youHi All,
I am stuck with the same problem, even i have changed the port of Informatica Server in DAC client to 6006 .
Still i am unable to connect the Informatica Server using DAC client
I have checked the PMREP and PMCMD using window prompt which are working fine.
Can any one kindly reply on this.
Thanks
Saurabh -
SSIS 2005 - Unable to access MSDB on Integration Services
Hi all
I have a little problem with my IS Server.
I am using IS 9.0.1399 (SSIS 2005).
I have one instance for databases.
I am able to connect to Integration Services just with the Servername (no Instance Name) and I see the folders in there.
When I try to open the MSDB Folder (under "Stored Packages") I get the following exeption:
"Login timeout expired
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
SQL Network Interfaces: Connection string is not valid [87]."
Any ideas??
Thanks for any comment!!
Best regards
Jacky Barbier
Regards, Jacky Please 'Mark as Answer' if my post answers your question and 'Vote as Helpful' if it helps you.It may be this
http://sqlserversolutions.blogspot.ae/2011/04/cant-expand-msdb-in-integration.html
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page
Maybe you are looking for
-
I was wondering if any knows why all my programs, escpecially my internet programs(Safari&Internet Explorer) are now always "unexpectedly quit". Just recently it has been happening, and when I try to go into my yahoo email account when im in Safari,
-
My i phone 4 keeps loosing its connection with my Toyota Camry bluethoth does anyone know what I can do about that?
-
DG4MSQL: Multiple instances not working (only single instance)?
Hi I've been successfully using DG4MSQL for months to extract data from a local SQL Server 2005 instance to our 10g Ent 10.2.0.3 instance. Today I was asked to add two more SQL server DB links on separate servers running the same version of SQL Serve
-
Please help me with this code. Newbie here!
Hi all, Below is a sample from the project that I am doing now. Would someone be so kind as to tell me how come the internal frame doesn't appear and the compiler keeps returning an error pointing to "setContentPane(mainDeskTop);"? Thanks in advance.
-
Hi there, we are trying to use Supersession in the ERP Sales Order. We already have done all the customizing steps mentioned in the SAP Help (http://help.sap.com/erp2005_ehp_04/helpdata/en/fc/a62238b497a552e10000009b38f842/frameset.htm). It works now