Register Integration service in DAC.

Hi all,
I am getting this message while trying to register the Informatica Integration Service in DAC. On the other hand the repository server registration is succcesful in DAC. I have the INFA_DOMAINS_FILE,INFA_HOME environmnet variables set already and the INTEGRATION and REPOSITORY services are up and running. I have added the Informatica/server/bin path to the PATH variables too.
I have entered the relational connection in workflow manager and assigned the integration services to workflows also. I have checked the port, Integration service seems t to be running on 4006 port. Can any one help please..
Failure connecting to "INFORMATICA_DW_SERVER"!
=====================================
STD OUTPUT
=====================================
Informatica(r) PMCMD, version [8.6.1 HotFix6], build [319.0622], LINUX 64-bit
Copyright (c) Informatica Corporation 1994 - 2009
All Rights Reserved.
Invoked at Thu Dec 17 18:12:44 2009
The command: [pingserver] is deprecated. Please use the command [pingservice] in the future.
WARNING: Lost server connection.
ERROR: Cannot connect to Integration Service [Integration:4006].
Completed at Thu Dec 17 18:12:44 2009
=====================================
ERROR OUTPUT
=====================================

hello any news about the solution to this issue?? I would appreciate sharing the solution just in case it has been resolved.
Regards to you all..

Similar Messages

Problem in starting Integration service with DAC 11g

Hi friends,
Im @ the step of registering integration service and the repository service in DAC 11g. I can start the Repository service well in DAC, but facing issue in starting integration service with DAC, while trying to test connection im getting a message like
Failure connecting to BIA_IS!
Im not sure the reason to this problem in DAC. I have also setted the necessary environment variables like INFA_HOME and INFA_DOMAINS_FILE referring the domains.infa file like
INFA_DOMAINS_FILE = C:\Informatica\9.1.0\domains.infa
Also checked with the dac_env file which has the below contents
REM -----------------------------------------------------
REM
REM ENVIRONMENT VARIABLES THAT YOU MAY NEED TO SET FOR
REM PROPER INFORMATICA 8.x or 9.x HANDSHAKE.
REM
REM INFORMATICA_SERVER_LOCATION denotes installation of
REM Informatica components. Example:
REM C:\Informatica\PowerCenter9.1
REM
REM DOMAINS.INFA_FILE_LOCATION denotes the location
REM (including name) of domains.infa file
REM
REM Please make sure to set correct values for variables
REM mentioned above
REM
REM -----------------------------------------------------
set INFORMATICA_SERVER_LOCATION="C:\Informatica\9.1.0"
set DOMAINS_INFA_FILE_LOCATION=C:\Informatica\9.1.0\domains.infa
set INFA_CMD_STYLE=8
set PATH=C:\Informatica\9.1.0\server\bin;%PATH%
set INFA_DOMAINS_FILE=%DOMAINS_INFA_FILE_LOCATION%
What could be the problem and where to check with the logfile related to the integration service failure in DAC.
Thanks in advance.
Regards,
Saro

Hi guys,
The issue is sorted out. The below are the two precautions to be considered.
*) Make sure of INFA_HOME/Server/bin exist @ the end in the PATH variable.
*) For each and every change in the PATH variable, it is better to restart the services(both infa and DAC) then and there for the changes to take effect.
Regards,
Saro

Registering Informatica service in DAC client Fails

Hi
we are configuring BI-application with Oracle11.5.10.
we are successful in installing all the components.
But we are stuck in registering Informatica service in DAC client (section 4.12.2 in install guide)
we gave the setting details as below
Name -->PowercentreBIREPO_Integration_service (this is our informatica integration service name )
Type -->Informatica
ServerHostname--> <IP Address>
ServerPort--> 4006
Login ---> Administrator
Password ---> <pwd>
Maximum session -->default 10
Repository Name -->Oracle_BI_DW_Base
Inactive
when we tested the connection we get "failure connection to Integration service name " STD output error Output
Also in the Dac Client we can see the DAC serve Status icon not in green Color, DAC server is in Idle mode only
please let us know how to resolve it..
thanks in advance
regards
RK

Hi,
I have a similar problem.
I am configuring the DAC Server Communication with Informatica PowerCenter, I have configured the the Imformatica connection (the test works). The Repository connection does not work.
These are the settings:
Name =Repository Service
Type =Repository
Server Hostname= myserver
Server Port =6001
Login = Administrator
P/W =Administrator
Max Sessions =10
Repository Name =Oracle_BI_BW_Base
I have set the path variable to:
C:\Informatica\PowerCenter8.1.1\server\bin;C:\Informatica\PowerCenter8.1.1\client\bin
This is the error:
=====================================
STD OUTPUT
=====================================
Informatica(r) PMREP, version [8.1.1 SP4], build [43.0817], Windows 32-bit
Copyright (c) Informatica Corporation 1994 - 2007
All Rights Reserved.
This Software may be protected by U.S. Patent Numbers 6,208,990; 6,044,374; 6,014,670; 6,032,158; 5,794,246; 6,339,775 and other U.S. Patents Pending.
Invoked at Wed Jan 28 10:01:14 2009
[01/28/2009 10:01:14-[REP_12164] Domain-related error: [[DOM_10033] [DOM_10033] Service [Oracle_BI_BW_Base] does not exist in domain [Domain_ws2003]. [FAULT_PCSFCONFIGEXCEPTION]].]
[Failed to connect to repository service [Oracle_BI_BW_Base].]
An error occurred while accessing the repository[Failed to connect to repository service [Oracle_BI_BW_Base].]
[01/28/2009 10:01:14-[REP_55102] Failed to connect to repository service [Oracle_BI_BW_Base].]
Repository connection failed.
Failed to execute connect.
Completed at Wed Jan 28 10:01:14 2009
=====================================
ERROR OUTPUT
=====================================
EXCEPTION CLASS::: com.siebel.analytics.etl.infa.interaction.PmrepConnectException
com.siebel.analytics.etl.infa.interaction.PmrepInvoker.pmrep(PmrepInvoker.java:93)
com.siebel.etl.gui.data.StaticDatabaseCalls.testRepositoryServer(StaticDatabaseCalls.java:946)
com.siebel.etl.gui.data.StaticDatabaseCalls.testInformaticaServer(StaticDatabaseCalls.java:881)
com.siebel.etl.net.ExecutionPlan.getInformaticaStatus(ExecutionPlan.java:261)
com.siebel.etl.net.ClientMessageDispatcher$WorkerThread.mBeanRequestInformaticaStatus(ClientMessageDispatcher.java:403)
com.siebel.etl.net.ClientMessageDispatcher$WorkerThread.consoleMessage(ClientMessageDispatcher.java:220)
com.siebel.etl.net.ClientMessageDispatcher$WorkerThread.run(ClientMessageDispatcher.java:140)

Unable to register Informatica Integration Service & Repository on DAC

hi Gurus:
I´m not able to register the Informatica services on DAC. The services are running and I also created a Custom Property on the Integration Services to set the server port to 4006, I created the Administrator user on the Informatica Administrator Console, but nothing has worked.
My OBIEE Apps version is 7.9.6.3 and Informatica is 9.0.1 hotfix 2.
Thanks

Check these
For Type=Informatica
Service--> Give Integration service name
Server Port: 6007 as per my config
Domain-->Doamin_<hostname>
Repository Name-> as per your config
For Type=Repository
Hostname-><hostname>
Server Port : 6005 as per my config
Domain-->Doamin_<hostname>
Repository Name-> as per your config
The host and port number can get from file \Informatica\9.0.1\domains.infa
there is a possibility for work with same ports as I mentioned
Make sure your dac and informatica servers are up and running
Mark if helps

Error while integarting the DAC with the Informatica Integration services

Hi Experts,
I am setting up the BI APPS. I am following the documentation provided by oracle. Everything went on smoothly but when when I am trying to integrate the DAC with the Integration service created in informatica it is giving me the following error:
Informatica(r) PMCMD, version [8.6.0 HotFix4], build [272.1017], Windows 32-bit
Copyright (c) Informatica Corporation 1994 - 2008
All Rights Reserved.
Invoked at Mon Jun 01 14:10:47 2009
[DOM_10033] [DOM_10033] Service [10.136.51.183] does not exist in domain [Domain_ZZDAP2FLM951].
ERROR: Cannot connect to Integration Service [10.136.51.183].
Completed at Mon Jun 01 14:10:48 2009
=====================================
ERROR OUTPUT
=====================================
Important Obeservation: When I am trying to connect the repository service from DAC it is connecting successfully.
Can anyone please provide me the solution for this. It is really urgent.
Thanks in advance.
Satyabrat

Here is what you need to do... there are some gaps in the documentation for 7.9.6 with infa 8.6:
1) In infa 8.6 there is no repository and informatica server, instead you have repository service and integration service
2) make sure you note down the name of the repository service and integration service when you do the post install of the informatica install
3) when you try to register Infa repository in DAC, make sure you use the (hostname/services) as the name of the infa integration service,
and in repostory name use the name of the repository service and not Oracle_BI_DW_base....
if you still have errors upload or email ([email protected]) the DAC config screens

DAC Error: Connecting to integration service

Hi all,
I have followed all the steps as per the install guide. I went through the forum too but still have the below error. Able to connect to Repository successfully. But error while connecting to Integration service.
Failure connecting to "_______"
=====STD output=====
The command Pingserver is deprecated. Please use command [pingservice] in future.
Warning: Lost server connection
Error: Cannot connect to Integration service[host:portno]
======Error Output=====
There is one small change in the config.bat file. in the set JAVA_HOME Instead of using the path "C:\Program Files\Java\jdk1.5.0_07" I have used "C:\orahome\10gR3_2\jdk" since it has no spaces.
I am not sure if there is any problem with this path since the DAC server and client are running properly.
Also, when I run
C:\Documents and Settings\Administrator>pmcmd pingservice -s HostName:6001
it gives error:
Informatica(r) PMCMD, version [8.1.1], build [600.0831], Windows 3
Copyright (c) Informatica Corporation 1994 - 2006
All Rights Reserved.
Invoked at Wed Aug 11 14:17:05 2010
WARNING: Lost server connection.
ERROR: Cannot connect to Integration Service [HostName:6001].
Completed at Wed Aug 11 14:17:46 2010
In environment variables - I have added Informatica bin paths and have also added INFA_DOMAINS_FILE.
I have read about the 2 EBFs for informatica to be extracted. Do I need them? I am using OBIApps 7.9.5 and Informatica 8.1.1.
Am not sure what is wrong now.
Any help is greatly appreciated.
Thanks.
Edited by: user522729 on Aug 11, 2010 2:42 AM

The integration service was running on a different port. Used the correct port and it was working.
Edited by: user522729 on Aug 16, 2010 4:40 AM

BIA 7.9.6.1 Unable to connect to Informatica services from DAC

Hi All,
As a learning exercise, I have installed the following on a single Windows XP machine (Am aware that Windows XP is not supported for Informatica Service install - but currently have access to only this machine)
- OBIA 7.9.6.1
- Informatica 8.6.1 client & services with hotfix 6
- DAC client & server
I have created the Repository and Integration services in Informatica PowerCenter and are running in normal mode
I have configured the DAC as per installation document. I am now trying to configure the DAC Integration Settings for informatica.
I am unable to register an Integration service or a repository service and get the following errors,
On testing the Integration Service registration
Failure connecting to "INFORMATICA_DW_SERVER"!
And in the log file I find
SEVERE Thu Nov 12 11:43:54 WST 2009
ANOMALY INFO::: Error while pinging informatica server using command pmcmd pingservice -sv int_service -d Domain_ASG596138
MESSAGE:::log\ping.log (The system cannot find the file specified)
EXCEPTION CLASS::: java.io.FileNotFoundException
java.io.FileInputStream.open(Native Method)
java.io.FileInputStream.<init>(FileInputStream.java:106)
java.io.FileInputStream.<init>(FileInputStream.java:66)
com.siebel.etl.functional.ReadFileToBuffer.readFileToBuffer(ReadFileToBuffer.java:39)
com.siebel.etl.gui.data.StaticDatabaseCalls.testServer(StaticDatabaseCalls.java:917)
com.siebel.etl.gui.data.StaticDatabaseCalls.testInformaticaServer(StaticDatabaseCalls.java:887)
com.siebel.etl.net.ExecutionPlan.getInformaticaStatus(ExecutionPlan.java:275)
com.siebel.etl.net.ClientMessageDispatcher$WorkerThread.mBeanRequestInformaticaStatus(ClientMessageDispatcher.java:433)
com.siebel.etl.net.ClientMessageDispatcher$WorkerThread.consoleMessage(ClientMessageDispatcher.java:224)
com.siebel.etl.net.ClientMessageDispatcher$WorkerThread.run(ClientMessageDispatcher.java:144)
On testing the Repository Service registration
Failure connecting to "INFORMATICA_REP_SERVER"!
ANOMALY INFO::: Error while pinging informatica repository server
MESSAGE:::C:\orahome\10gR3_2\bifoundation\dac\log\pmrepConnect.log (The system cannot find the file specified)
EXCEPTION CLASS::: java.io.FileNotFoundException
java.io.FileInputStream.open(Native Method)
java.io.FileInputStream.<init>(FileInputStream.java:106)
java.io.FileInputStream.<init>(FileInputStream.java:66)
com.siebel.etl.functional.ReadFileToBuffer.readFileToBuffer(ReadFileToBuffer.java:39)
com.siebel.analytics.etl.infa.interaction.PmrepInvoker.pmrep(PmrepInvoker.java:100)
com.siebel.etl.gui.data.StaticDatabaseCalls.testRepositoryServer(StaticDatabaseCalls.java:959)
com.siebel.etl.gui.data.StaticDatabaseCalls.testInformaticaServer(StaticDatabaseCalls.java:890)
com.siebel.etl.net.ExecutionPlan.getInformaticaStatus(ExecutionPlan.java:275)
com.siebel.etl.net.ClientMessageDispatcher$WorkerThread.mBeanRequestInformaticaStatus(ClientMessageDispatcher.java:433)
com.siebel.etl.net.ClientMessageDispatcher$WorkerThread.consoleMessage(ClientMessageDispatcher.java:224)
com.siebel.etl.net.ClientMessageDispatcher$WorkerThread.run(ClientMessageDispatcher.java:144)
Could anyone please suggest what could be the cause of these errors. Any pointers to how to debug this will also be great. Please note I am totally new to Informatica and OBIA.
Many Thanks,
Kiran

HI All,
I fixed the first part of the issue. Now I am able to connect top the Integration Service. I created system environment variable INFA_DOMAINS_FILE and included the BIN path in PATH variable.
However unable to connect to the Informatica Repository service. I am getting the follwoing error
Failure connecting to "INFORMATICA_REP_SERVER"!
ANOMALY INFO::: Error while connecting to informatica repository server
MESSAGE:::
pmrep Connect Error
=====================================
STD OUTPUT
=====================================
Informatica(r) PMREP, version [8.6.1], build [183.1218], Windows 32-bit
Copyright (c) Informatica Corporation 1994 - 2008
All Rights Reserved.
This Software may be protected by U.S. Patent Numbers 6,208,990; 6,044,374; 6,014,670; 6,032,158; 5,794,246; 6,339,775; 6,850,947; 6,895,471; 7,254,590 and other U.S. Patents Pending.
Invoked at Thu Nov 12 12:59:16 2009
[11/12/2009 12:59:25-[REP_12164] Domain-related error: [[PCSF_46008] Cannot connect to gateway to look up service [repo_service]. [FAULT_PCSFTIMEOUTEXCEPTION]].]
[11/12/2009 13:00:26-[REP_55115] Still trying to connect to the Repository Service [repo_service]. The remaining resilience time is 110 seconds.]
[11/12/2009 13:00:35-[REP_12164] Domain-related error: [[PCSF_46008] Cannot connect to gateway to look up service [repo_service]. [FAULT_PCSFTIMEOUTEXCEPTION]].]
[11/12/2009 13:01:37-[REP_55115] Still trying to connect to the Repository Service [repo_service]. The remaining resilience time is 39 seconds.]
[11/12/2009 13:01:46-[REP_12164] Domain-related error: [[PCSF_46008] Cannot connect to gateway to look up service [repo_service]. [FAULT_PCSFTIMEOUTEXCEPTION]].]
[11/12/2009 13:02:21-[REP_55112] Unable to connect to the Repository Service [repo_service] since the resilience time is up.]
[Failed to connect to repository service [repo_service].]
An error occurred while accessing the repository[Failed to connect to repository service [repo_service].]
[11/12/2009 13:02:21-[REP_55102] Failed to connect to repository service [repo_service].]
Repository connection failed.
Failed to execute connect.
Completed at Thu Nov 12 13:02:21 2009
=====================================
ERROR OUTPUT
=====================================
EXCEPTION CLASS::: com.siebel.analytics.etl.infa.interaction.PmrepConnectException
com.siebel.analytics.etl.infa.interaction.PmrepInvoker.pmrep(PmrepInvoker.java:102)
com.siebel.etl.gui.data.StaticDatabaseCalls.testRepositoryServer(StaticDatabaseCalls.java:959)
com.siebel.etl.gui.data.StaticDatabaseCalls.testInformaticaServer(StaticDatabaseCalls.java:890)
com.siebel.etl.net.ExecutionPlan.getInformaticaStatus(ExecutionPlan.java:275)
com.siebel.etl.net.ClientMessageDispatcher$WorkerThread.mBeanRequestInformaticaStatus(ClientMessageDispatcher.java:433)
com.siebel.etl.net.ClientMessageDispatcher$WorkerThread.consoleMessage(ClientMessageDispatcher.java:224)
com.siebel.etl.net.ClientMessageDispatcher$WorkerThread.run(ClientMessageDispatcher.java:144)
Please help.
Thanks,
Kiran

Improper Install of Hyper-V 2012 R2 Integration Services on 2008 R2 VMs

I have two VMs that have one or more missing/broken services after upgrading to Integration Services 6.3.9600.16384. On one VM the Hyper-V Remote Desktop Virtualization Service is missing and the Hyper-V Data Exchange Service won't start. The
other VM was missing the Hyper-V Remote Desktop Virtualization Service. I was able to create that service by restoring registry entries from another VM with working integration services and re-registering the DLLs from the driver, but the service won't
start. Both services that won't start return the error "1083: The executable program that this service is configured to run in does not implement the service". I also tried an Offline
Install of Integration Services, but that didn't fix anything. Since I am running 2008 R2, there is no uninstall available (I did modify the powershell script from the abve link to uninstall, but it didn't work). I have been un-successful in
finding a way to trick/force the installer to install again over top of itself.

Hi Gregg,
Thank you for posting in Windows Server Forum.
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thank you for your understanding and support.
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

J2Se receiver File adapter-HTTP 503 no listener registered for service

Hi,
We are using J2Se file adapter for one the interfaces and the logs of the J2se adapter engine has shown the following error-
Error: com.sap.aii.messaging.net.TransportException: HTTP 503 no listener registered for service /file/example_outbound
     at com.sap.aii.messaging.net.HTTPRequest.run(ServerHttpImpl.java:416)
I checked with the J2SE File/FTP receiver adapter configuration given at help.sap and found the following the following info related to the error-
Specifications for addressing by the Integration Engine
○       XI.httpPort=<port_no>
<port_no>specifies the HTTP server port that receives the messages from the Integration Engine.
○       XI.httpService=<service>
<service> describes the service part of the address where the Integration Engine must send its messages.
These specifications are mandatory.
If, for example, you have specified XI.httpPort=1234 and XI.httpService=/file/Receiver, the end point address of the file/FTP adapter in the Integration Engine must be specified as follows:
http://<fileadapterhost>:1234/file/Receiver
The end point address must be extended as follows for the Integration Engine in Release 1.0:
http://<fileadapterhost>:1234/file/Receiver?action=execute&pipelineid=Receiver
If the Integration Engine message is sent to a non-specified adapter service, the system displays the following error message:
*No registered listener for <Service> found*
The system displays the same message if the adapter is initialized, but has not been started (status STOPPED or INITIALIZED).
Where I need to check this Integration engine address specifications. I have't found any of the above code in the adapter configuration which we are using presently.The interface is running successfully before but thrown this error now.
Please reply me if some one has faced similar issue and get it resolved.

Hi
How was this issue resolved? I have the same problem.
I only have two receivers - the deafult j2se file receiver and my newly created one which used the default as a template. The ports and service's are different.
I've even tried deleting my custom receive adapter and using only the default one but i still get that error.

I need a Microsoft document that says "sqlservr.exe" can register setspn (Service Principal Name)

On all of my SQL Server instances, I can find SQL server error logs that have the same 3 entries below, so while I already know it can, I need a Microsoft document that says "sqlservr.exe" can so I can convince the network guys to grant the service
account for SQL "Write servicePrincipalName: Allow" in AD.
63 2014-06-26 20:24:02.980 Server The SQL Server Network Interface library could not register the Service Principal Name (SPN) [ MSSQLSvc/DFW-MSSQLDW.PathologyPartners.intranet:1433
] for the SQL Server service. Windows return code: 0x2098, state: 20. Failure to register a SPN might cause integrated authentication to use NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication
is required by authentication policies and if the SPN has not been manually registered.
61 2014-06-26 20:24:02.970 Server The SQL Server Network Interface library could not register the Service Principal Name (SPN) [ MSSQLSvc/DFW-MSSQLDW.PathologyPartners.intranet:DW
] for the SQL Server service. Windows return code: 0x2098, state: 20. Failure to register a SPN might cause integrated authentication to use NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication
is required by authentication policies and if the SPN has not been manually registered.
38 2014-06-26 20:24:02.840 Server SQL Server is attempting to register a Service Principal Name (SPN) for the SQL Server service. Kerberos authentication will not
be possible until a SPN is registered for the SQL Server service. This is an informational message. No user action is required.
Duane Lawrence

Refer the below article
http://blogs.msdn.com/b/psssql/archive/2010/03/09/what-spn-do-i-use-and-how-does-it-get-there.aspx
Automatic SPN Registration
When an instance of the SQL Server Database Engine starts, SQL Server tries to register the SPN for the SQL Server service. When the instance is stopped, SQL Server tries to unregister the SPN. For a TCP/IP connection the SPN is registered in the format MSSQLSvc/<FQDN>:<tcpport>.Both
named instances and the default instance are registered as MSSQLSvc, relying on the <tcpport> value to differentiate the instances.
--Prashanth

SQL Server 2005 Dev Integration Services Fail

I've got VS2005 v.8.0.50727.867 (vsvista.050727-8600) on my 64bit Windows 7 box. I am trying to install SQL Server 2005 Integration Services on this Win7 box so I can load and edit the Win XP SSIS projects that I had on my XP box. So far I've
not been able to successfully install the Integration Services with a failed permission on the SQL**DTD.msi file.....I've copied this file locally and tried to run it and it would start but then would give permission error.
Is there an inherent incompatibility running SSIS projects in SQL Server 2005 on a 64bit Win 7 box? Worked great on my XP box.
I've been "upgrading" the SSIS projects to VS2008 since I was able to get SSIS installed. Any ideas what I need to do to get this beast to work?
TIA
Harry

Thanks Alberto
Microsoft SQL Server 2005 9.00.1399.06
==============================
OS Version      : Professional Service Pack 1 (Build 7601)
Time            : Mon Aug 25 09:31:30 2014
DT0315 : Microsoft Internet Information Services (IIS) is either not installed or is disabled. IIS is required by some SQL Server features. Without IIS, some SQL Server features will not be available for installation. To install all SQL Server features,
install IIS from Add or Remove Programs in Control Panel or enable the IIS service through the Control Panel if it is already installed, and then run SQL Server Setup again. For a list of features that depend on IIS, see Features Supported by Editions of SQL
Server in Books Online.
DT0315 : Failed to find the ASP.Net Version Registration with Microsoft Internet Information Services (IIS).
Machine         : DT0315
Product         : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.1399.06
Install         : Successful
Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_SQLSupport_1.log
Machine         : DT0315
Product         : Microsoft Office 2003 Web Components
Product Version : 11.0.6558.0
Install         : Successful
Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_OWC11_1.log
Machine         : DT0315
Product         : Microsoft SQL Server 2005 Backward compatibility
Product Version : 8.05.1054
Install         : Successful
Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_BackwardsCompat_1.log
Machine         : DT0315
Product         : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.1399.06
Install         : Successful
Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_SQLSupport_2.log
Machine         : DT0315
Product         : Microsoft SQL Server Native Client
Product Version : 9.00.5000.00
Install         : Successful
Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_SQLNCLI_1.log
Machine         : DT0315
Product         : Microsoft Office 2003 Web Components
Product Version : 11.0.6558.0
Install         : Successful
Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_OWC11_2.log
Machine         : DT0315
Product         : Microsoft SQL Server 2005 Backward compatibility
Product Version : 8.05.1054
Install         : Successful
Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_BackwardsCompat_2.log
Machine         : DT0315
Product         : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.1399.06
Install         : Successful
Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_SQLSupport_3.log
Machine         : DT0315
Product         : Microsoft SQL Server Native Client
Product Version : 9.00.5000.00
Install         : Successful
Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_SQLNCLI_2.log
Machine         : DT0315
Product         : Microsoft Office 2003 Web Components
Product Version : 11.0.6558.0
Install         : Successful
Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_OWC11_3.log
Machine         : DT0315
Product         : Microsoft SQL Server 2005 Backward compatibility
Product Version : 8.05.1054
Install         : Successful
Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_BackwardsCompat_3.log
Machine         : DT0315
Product         : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.1399.06
Install         : Successful
Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_SQLSupport_4.log
Machine         : DT0315
Product         : Microsoft SQL Server Native Client
Product Version : 9.00.5000.00
Install         : Successful
Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_SQLNCLI_3.log
Machine         : DT0315
Product         : Microsoft Office 2003 Web Components
Product Version : 11.0.6558.0
Install         : Successful
Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_OWC11_4.log
Machine         : DT0315
Product         : Microsoft VSS Writer for SQL Server 2012
Product Version : 11.0.2100.60
Install         : Successful
Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_SqlWriter_1.log
Machine         : DT0315
Product         : Microsoft SQL Server 2005 Backward compatibility
Product Version : 8.05.1054
Install         : Successful
Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_BackwardsCompat_4.log
Machine         : DT0315
Product         : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.1399.06
Install         : Successful
Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_SQLSupport_5.log
Machine         : DT0315
Product         : Microsoft SQL Server Native Client
Product Version : 9.00.5000.00
Install         : Successful
Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_SQLNCLI_4.log
Machine         : DT0315
Product         : Microsoft Office 2003 Web Components
Product Version : 11.0.6558.0
Install         : Successful
Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_OWC11_5.log
Machine         : DT0315
Product         : Microsoft SQL Server 2005 Books Online (English)
Product Version : 9.00.1399.06
Install         : Successful
Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_BOL_1.log
Machine         : DT0315
Product         : Microsoft SQL Server 2005 Backward compatibility
Product Version : 8.05.1054
Install         : Successful
Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_BackwardsCompat_5.log
Machine         : DT0315
Product         : Integration Services
Error           : Failed to install and configure assemblies C:\Program Files\Microsoft SQL Server\90\DTS\Tasks\Microsoft.SqlServer.MSMQTask.dll in the COM+ catalog. Error: -2146233087
Error message: Unknown error 0x80131501
Error description: One or more of the components being installed are already registered as 32 bit components in the target application. You must install the 64 bit versions of the components being installed in a different COM+ application, or delete the existing
32 bit versions of the components being installed from the target COM+ application prior to attempting install of the 64 bit versions. COM+ applications cannot contain bit neutral components.
Machine         : DT0315
Product         : Microsoft SQL Server 2005 Integration Services (64-bit)
Product Version : 9.00.1399.06
Install         : Failed
Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_DTS.log
Last Action     : InstallFinalize
Error String    : Failed to install and configure assemblies C:\Program Files\Microsoft SQL Server\90\DTS\Tasks\Microsoft.SqlServer.MSMQTask.dll in the COM+ catalog. Error: -2146233087
Error message: Unknown error 0x80131501
Error description: One or more of the components being installed are already registered as 32 bit components in the target application. You must install the 64 bit versions of the components being installed in a different COM+ application, or delete the existing
32 bit versions of the components being installed from the target COM+ application prior to attempting install of the 64 bit versions. COM+ applications cannot contain bit neutral components.
Error Number    : 29549
Machine         : DT0315
Product         : SQLXML4
Product Version : 9.00.1399.06
Install         : Successful
Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_SQLXML4_1.log
Machine         : DT0315
Product         : Microsoft SQL Server 2005 (64-bit)
Product Version : 9.00.1399.06
Install         : Successful
Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_SQL.log
Machine         : DT0315
Product         : SQLXML4
Product Version : 9.00.1399.06
Install         : Successful
Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_SQLXML4_2.log
Machine         : DT0315
Product         : Microsoft SQL Server 2005 Analysis Services (64-bit)
Product Version : 9.00.1399.06
Install         : Successful
Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_AS.log
Machine         : DT0315
Product         : Microsoft SQL Server 2005 Notification Services (64-bit)
Product Version : 9.00.1399.06
Install         : Successful
Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_NS.log
Machine         : DT0315
Product         : Microsoft SQL Server 2005 Tools (64-bit)
Product Version : 9.00.1399.06
Install         : Successful
Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_Tools.log
SQL Server Setup failed. For more information, review the Setup log file in %ProgramFiles%\Microsoft SQL Server\90\Setup Bootstrap\LOG\Summary.txt.

TFS get latest with Integration Services project causes changes to dtproj file

Does anyone know how to stop this behaviour? Get latest should not cause changes to be made to a file so far as I know.
Also, when viewing the differences TFS says the files are identical...
...And, undo pending changes just results in the same changes being made once they're undone.

Hi Dev4,
Sorry for bringing you any inconvenience on waiting a long time for Microsoft assistance. Unfortunately your thread did not reach into our support queue until yesterday. I would like to check with you when you renewed or registered your subscription account.
We can see it only after you registered or renewed your subscription account.
For this issue, based on our analysis, it is mostly related to TFS. I have involved TFS engineers for a further look at this issue. Below is from their support:
As far as I know the Get Latest operation synchronizes your workspace with the latest version on the TFS server.
Please consider the following scenario, for example if one of your team members makes some changes to the Integration Services project and then submits these changes to the TFS server, however if you do not get that changed Integration Services project
to your local machine, the dtproj file on your local machine is different from that on the TFS server. At this time, when you get do the Get Latest Version operation in the Source Explorer, the dtproj file on your local machine will be “overwritten”
by the server version. So it seems that your local dtproj file is changed.
If you want to undo the Get Latest Version operation, you can just use the Get Specific Version operation in the Source Explorer to get your appropriate version of the dtproj file.
Hope this helps,
If you have questions about TFS in future, please post them in http://social.msdn.microsoft.com/forums/en-US/tfsversioncontrol/threads/ to
get quick support.
Regards,
Jerry
TechNet Subscriber Support in forum
If you have any feedback on our support, please contact
[email protected]

VS2008 unable to load Integration Services package document after creation

Upon creating a new IS project in Visual Studio 2008, I get this error message in a tabbed window:
"Microsoft Visual Studio is unable to load this document: To design Integration Services packages in BI Development Studio, IS has to be installed by one of these editions of SQL Server 2008: Standard, Enterprise, Developer, or Evaluation. To install IS, run SQL Server setup and select Integration Services."
But I do have IS installed. I have two databases, one from the free Express Advanced edition and one from Developer edition. SQL 2008 setup (Developer edition) shows IS installed as a shared component. I installed the Express edition before later installing the Developer edition and had no problems. What needs to be done here? Help, and thanks for any help!
I experienced this problem while running and following a video tutorial "Creating a Basic Package," from this MSDN site:
http://msdn.microsoft.com/en-us/library/cc952921.aspx
If it helps, I have .NET 3.5 SP1 installed.

Most likely its MSXML, which is the most common one to get damaged since it supports multiple side-by-side install and uninstalls, but doesn't repair itself during SQL reinstall.
Try this:
1. Manually re-register the MSXML6 Dlls on the system where you are experiencing the problem by executing the following commands at a command prompt (you need to run these
commands from an Administrative Command prompt on the newer operating systems.)
On a 32-bit machine:
regsvr32 %windir%\system32\msxml6.dll
regsvr32 %windir%\system32\msxml3.dll
On a 64-bit system, reregister both the 32-bit and 64-bit Dlls:
regsvr32 %windir%\system32\msxml6.dll
regsvr32 %windir%\system32\msxml3.dll
regsvr32 %windir%\SysWOW64\msxml3.dll
regsvr32 %windir%\SysWOW64\msxml6.dll
2. Restart the failing application. For example, if BIDS is experiencing the error, close BIDS and start it again. Test the application in the same way which generated the error noted in the symptoms section.
3. If you are still experiencing the problem after Step 2, you may need to reinstall MSXML6 and then run Windows Update to ensure that the MSXML dlls are patched with the latest security updates. You can download MSXML6 from the following location:
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=993c0bcf-3bcf-4009-be21-27e85e1857b1&displaylang=en
4. If that doesn't so it, you can run process monitor and see which COM class id in the registry, which dll, or which GAC Native Image or Assembly is out of wack.
Download Process Monitor tool,
and run it to monitor with filter process name = devenv.exe
and examine the logs of the tool to see if registry keys are reported as NAME NOT FOUND or ACCESS DENIED.
On another thread, they COM was out of wack:
http://social.msdn.microsoft.com/Forums/en-US/sqlintegrationservices/thread/52b10adf-1c8b-4f30-918c-b199ce50155b
regsvr32 oleaut32.dll
regsvr32 actxprxy.dll
Thanks, Jason
Didn't get enough help here? Submit a case with the Microsoft Customer Support team for deeper investigation - http://support.microsoft.com/select/default.aspx?target=assistance

Error launching Integration Services Project in BIDS

A user has reported the following issue. Not sure how to help him:"Error launching Integration Services Project in BIDS Error launching Integration Services Project in BIDS I am receiving the error below when I try to create an integration services project in BIDS. I have tried manually registering the DTS.dll which is the only solution
I have been able to find in ~30mins of Google searching, to no avail."The application log shows a single warning:Visual Studio VsTemplate event ID 1One or more templates do not match any installed project packages.
Anyone seen this before?
This topic first appeared in the Spiceworks Community

Hi Anhlovevietnam,
According to the error message, it seems that the Analysis Services account lack permission to access ‘QLTICKET’. By default, the default account for AS services has only public permission to few databases. If you haven't change the AS services account,
or haven't grant the permission for this account, then you cannot deploy the AS project to server.
So in your scenario, ensure the service "SQL Server Analysis Services" is running with a proper Log On As user. This user should have administrator permission on Analysis Services and the proper permissions on the database engine. To avoid this issue, you
can grant the SELECT permission for the default account for AS services to data source DB. Or you can change the services account to this domain user who has the corresponding to the data source DB.
http://jetreportskb.host4kb.com/article/AA-00238
Regards,
Charlie Liao
Charlie Liao
TechNet Community Support

BIAPPS 7.9.5.1 Failure connecting to integration service

Business Intelligence 10.1.3.4.1
Biapps version 7.9.5.1
Informática Powercenter 8.1.1
After completing the installation according to the manual we have copied the hibernate libraries in DAC directory:
http://download.oracle.com/docs/cd/E10783_01/doc/bi.79/e10742/anyinstadmwininstall.htm#i1105233
And also copied the Emergency Bug Files in Informatica:
Informatica Session Completing Successfully, but Still in Running Status
We have tried with Informática Powercenter 8.1.1 without Service Pack, and also applying the SP5, but we are getting the same error in DAC while making the Test Connection in both cases:
"Failure connecting to "integracion_informa"
STD OUTPUT
Informatica(r) PMCD, version [8.1.1 SP5], build [135.0129], Windows 32-bit
Copyright (c) Informatica Corporation 1994 - 2008
All Righst reserved
Invoked at Fri Apr 16 13:29:52 2010
The command: [pingserver] is deprecated. Please use the commando [pingservice] in the future.
WARNING: Lost server connection.
ERROR: Cannot connect to Integration Service [integracion_informa:4006]
Completed at Fri Apr 16 13:29:52 2010
ERROR OUTPUT"
cmd window:
"16-abr-2010 13:29:52 com.siebel.analytics.etl.client.util.DataVerification giveWarning
INFO: Unknown verification type!
16-abr-2010 13:29:52 com.siebel.analytics.etl.client.data.dataobject.UpdatableDataObject createUpdate
INFO: 0 calls to database avoided
DAC Command Line Utility Invocation"
There´s no other information about the error. Test connection for repository is correct.
We have done the installation many times, restarted the computer, restarted informatica services, restarted DAC server, verified in the Powercenter Admin Console that both (integration and repository) services are up...
Days ago, we have succesfully installed Biapps 7.9.6.1 and loaded PeopleSoft 9.0 data, but now we are trying to load PeopleSoft 8.8 and we are obligued to uses Biapps 7.9.5.1, because 7.9.6.1 have no connection with PeopleSoft 8.8.
Thanks in advance.
Edited by: user11179355 on 19-abr-2010 1:46

We have upgraded this repository to connect to it using DAC version 10.1.3.4.1 and we noticed that in Setup-Informatica Servers all the fields except Domain, had the values we entered using the previous version of DAC. This makes sense, because in the previous version of DAC (Biapps 7.9.5.1) you cannot enter the domain name.
If we try to connect to it without filling this field we get the same blank error. But if we fill it with the correct domain name the test ends succesfully. So if we could put the domain name in DAC Biapps 7.9.5.1 we might make it work.
Is there any place where you can put the domain name value in this version?
Does anyone know the table where this value is stored?

Register Integration service in DAC.

Similar Messages

Maybe you are looking for