Daemon not running

I am trying to run OEM and it is failing to start do to the daemon not running. On the http://localhost:5500/em login page it says the database might be shutdown and has a startup and recovery button. I clicked on startup, even though I know the database is up. I put in the login credentials and it fails with an IO error.
Can anyone help me?

Hi
I can tell you about the Windows Environment. These steps may solve your problem.
Check and perform the following.
1. DBSNMP and SYSMAN accounts are NOT LOCKED.
2. OS user responsible for starting services is a member of ORA_DBA group.
3. OS user is a member of LOGON AS BATCH JOB in Local Security Policy.
4. In Host Credentials provide the OS user name in the following way
DOMAIN_NAME\username.
5. Verify Listener is running and appropriate entries exists in TNSNAMES.ora file.
Hope it helps.
Rgds
Adnan

Similar Messages

FAIL: process hdbdaemon HDB Daemon not running - HANA

Hello guys,
I'm not being able to start a SAP HANA instance. Here's the output of the HDB start command:
I've already check the free space on the files systems as you can see here:
I can't figure out what is happening. Any suggestions?
Regards.

The startup error is somewhat misleading as Serge commented above:-
> FAIL: process hdbdaemon HDB Daemon not running
In a recent HEC HANA DB startup error scenario, the clue was this message in the startup.log file in the trace directory:-
> Unable to change to Directory /usr/sap/<SID>/HDB<nn>/vh<cid><sid>db01/trace
It turned out that the profile was edited with the incorrect instance number <nn>. After correcting this error, HANA DB started up successfully.

Process hdbdaemon HDB Daemon not running

Hi.
I was working on Hana Studio, i wanted to do a recovery, so Hana Studio stopped the instance, so i click on cancel the recovery and when i went to start again the instance it showed me this Error:
So i went to Linux Server (hanab1) to start manually HDB, and again showed me the same error:
So what can i do to fix this without doing a reinstallation of HANA???...I hope you can help so i can continue working on my client schemas.

Hi Miller,
See if the below note is usefull.
A procedure is implemented in the SAP HANA database that, after a failed recovery, prevents the database that is inconsistent as a result from starting. During this, the system writes the state transitions to the topology tree of a name server during a recovery, and deletes these if the recovery is successful. If the recovery is not completed successfully, relevant entries remain in the topology tree as a result. This causes the database start to terminate.
However, due to an error in the implementation of revision 23, entries of this type were permanently written to the topology tree for failed database backups. Therefore, these entries also prevent a subsequent restart or upgrade of the SAP HANA database.
1678038 - Restarting SAP HANA database fails
Regards,
Pavan Gunda

EM Daemon is not running.

Today when I started my laptop (XP SP2 with Oracle 10gR2, used as stand alone just for practice) I tried as usual to start the listener and called the EM DB console. I do this operation everyday and today I noticed from the console that everything was down, listener and connection to instance. This never happened so I started thinking of what I might have changed last time and the only operation I did was creating 2 directory objects 1 for data dumps and one for the relative logs from the command output. I used expdp from command line to export a table and this worked fine. Nothing else.
Today not only the console is not working but sqlplus gives as output:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
What I found is that when running
emctl status dbconsole
the output says : EM Daemon is not running.
I checked the windows services and all needed processes seemed to be running.
Despite I tried to restart the DBconsole process nothing changed.
Then restarted the OracleService<SID> process and checked again with
emctl status dbconsole.
Again it goes "EM Daemon is not running". But if I try to restart it tells me that the agent is already running.
I thought nothing had been fixed, instead surprisingly everything was now working fine, console and sqlplus.
Any idea of what might have happened? And ... is it regular that I still see the message EM Daemon is not running even if everything seems to be up and running ?
I then restarted my laptop and had exactly same experience - nothing was up despite the OracleService<SID> process was started in the services panel as well as the listener and the dbconsole agent.
Again, the situation was fixed by restarting the OracleService<SID> process although the output of emctl status dbconsole shows "EM Daemon is not running ".
This has happened overnight, and as said the only operations I did were those 2 basic creations of directories objects and dump of a user table. Until yesterday I never needed to manually restart the OracleService<SID> process.
Please let me know if you would like to see any logs or have the precise commands I ran.
Thanks,
Enrico

Thanks Madrid - it is weird because my laptop is isolated on may desk, and does not connect to any network since one month back. I have always been working with the loopback adapter that I configured months back following the indication on the Oracle site. So I configured it with 192.168.5.5 and always called the em console via my hostname and port, and the hostname is locally mapped to the above IP in the hosts file.
Coming to your advise, I noticed that EM configured with my localhost as the host name. In example, in the homepage the listener looks like LISTENER_"pasticci-116b1b" being "pasticci-116b1b" my hostname.
But above all - what I can't understand is what happened between yesterday and today to have triggered this kind of problems, since before shutting down yesterday I only did those apparently harmless operations...
Enrico

How do i find out if the server admin daemon is running

Hi All,
I've got an OS X server that for some reason ( probably due to me pratting around) has decided not to have a working server admin prog. I can fire up the client program and point it at any of the IP addresses that the server is looking at and then you get an error message basically saying that the server admin daemon is not contactable.
So ...
1). How can i find out if the back end daemon is running
2). what port(s) does it listen on
3). How can I turn on some logging to see what's happening when I run serve admin
4). Any other tips as to how to find out why its not working
Rgds
Alex

You should post this in one of the forums in the Mac OS X Server v10.5 Leopard category. You'll get better response there.

Tomcat server is not running automatically

Hi BO experts,
I have installed SAP Business Objects XI 3.1 in my system and noticed that Tomcat server is not running in Central Configuration Manager where the status is "Stopped". If I start manually also it's not starting (In properties, the startup type is - Automatic).
So I went this path "E:\Program Files\Business Objects\Tomcat55\bin" and double clicked "startup.bat" then I am able to login into Infoview. Could please someone explain that is there any possible way to run Tomcat automatally so that i do not need to start up manually every time?
Thanks in advance!!

I'm assuming that whoever installed the Apex Listener installed it under the Apache Tomcat application server. This isn't officially supported by Oracle, but it does work. You start Tomcat by executing "startup.bat" in its bin directory on Windows or "startup.sh" on Linux or other Unix-like OSes. In Windows, it will keep running as long as the command window is open (but you can minimize it) or I believe there is a way to set it up as a service - I'm not a Windows guru. In *nix, you can add an ampersand to the command to keep it running in background, or set it up to run as a daemon.
Altogether, you probably need someone to learn more about how to run Tomcat if the person who set it up for you is no longer available. There is plenty of information on-line - just use Google or Bing.

Java Applets do not run when UAC is enabled on Windows 7

HI,
I'm deploying Java 6.0_26-b03+ on Windows 7 and experiencing following problem:
Java applets do not run as standard domain users in Internet Explorer 9 on Windows 7 when UAC is enabled (i.E. http://www.java.com/de/download/installed.jsp). When logged on as Administrator or start IE9 as Administrator java applets do run.
If I diable UAC an log on as normal user then applets do run. Applets then still run if UAC is re-enabled again. It seems that UAC needs to be disabled for the Java Plug-In to register something in user context (assumption). If this registration happended Java applets do run also for standard Windows 7 users if UAC is enabled.
Since we're planning a corporate Windows 7 rollout (>800PCs) we cannot do this manually on every computer. Ther must be any solution for this problem.
Does anybody have the same problem and has already found a solution?
This is the content of the error log file generated when a standard domain user tries to run http://www.java.com/de/download/installed.jsp
+#+
+# A fatal error has been detected by the Java Runtime Environment:+
+#+
+# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x776677b2, pid=1320, tid=2380+
+#+
+# JRE version: 6.0_26-b03+
+# Java VM: Java HotSpot(TM) Client VM (20.1-b02 mixed mode, sharing windows-x86 )+
+# Problematic frame:+
+# C [ntdll.dll+0x477b2]+
+#+
+# If you would like to submit a bug report, please visit:+
+# http://java.sun.com/webapps/bugreport/crash.jsp+
+# The crash happened outside the Java Virtual Machine in native code.+
+# See problematic frame for where to report the bug.+
+#+
--------------- T H R E A D ---------------
+Current thread (0x01da8c00): JavaThread "main" [_thread_in_native, id=2380, stack(0x02420000,0x02620000)]+
siginfo: ExceptionCode=0xc0000005, writing address 0x00000024
Registers:
EAX=0x00000024, EBX=0x33827b58, ECX=0x7c38b4e8, EDX=0x7efeff3d
ESP=0x02616090, EBP=0x026160a4, ESI=0x00000024, EDI=0x00000020
EIP=0x776677b2, EFLAGS=0x00250212
Top of Stack: (sp=0x02616090)
+0x02616090: 02616236 00000000 7c34214f 01da6bc8+
+0x026160a0: 026160e4 026160ec 7c34f639 00000020+
+0x026160b0: 7c36b73f 00000000 6d1db83c 02616236+
+0x026160c0: 00000000 33827b58 7c38b548 026160b8+
+0x026160d0: 0000000d 026160bc 02615b4c 026165e0+
+0x026160e0: 7c34240d 7c382198 ffffffff 02616454+
+0x026160f0: 6d1d3b45 6d1db83c 00000000 02616210+
+0x02616100: 6d1db84c 01da8c00 33827b58 00000000+
Instructions: (pc=0x776677b2)
+0x77667792: 33 c0 5e 5d c2 04 00 90 90 90 90 90 90 90 8b ff+
+0x776677a2: 55 8b ec 83 ec 0c 56 57 8b 7d 08 8d 77 04 8b c6+
+0x776677b2: f0 0f ba 30 00 0f 83 eb e2 00 00 64 a1 18 00 00+
+0x776677c2: 00 8b 48 24 89 4f 0c c7 47 08 01 00 00 00 5f 33+
Register to memory mapping:
EAX=0x00000024 is an unknown value
EBX=0x33827b58 is an oop
+{method}+
+- klass: {other class}+
ECX=0x7c38b4e8 is an unknown value
EDX=0x7efeff3d is an unknown value
ESP=0x02616090 is pointing into the stack for thread: 0x01da8c00
EBP=0x026160a4 is pointing into the stack for thread: 0x01da8c00
ESI=0x00000024 is an unknown value
EDI=0x00000020 is an unknown value
Stack: [0x02420000,0x02620000], sp=0x02616090, free space=2008k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
+C [ntdll.dll+0x477b2] RtlEnterCriticalSection+0x12+
+C [MSVCR71.dll+0xf639] _crtGetLocaleInfoW+0x2b1+
+C [deploy.dll+0x3b45] Java_com_sun_deploy_config_WinConfig_installShortcut+0x235+
j com.sun.deploy.config.Config.versionUpdateCheck()V392+
j com.sun.deploy.config.Config.initialize()Z256+
j com.sun.deploy.config.Config.<clinit>()V1933+
v ~StubRoutines::call_stub
+V [jvm.dll+0xfae4b]+
+V [jvm.dll+0x18c531]+
+V [jvm.dll+0xfaecd]+
+V [jvm.dll+0x7deb7]+
+V [jvm.dll+0x7ed1e]+
+V [jvm.dll+0x7f009]+
+V [jvm.dll+0x7f126]+
+V [jvm.dll+0x4d719]+
+V [jvm.dll+0x4de7f]+
+V [jvm.dll+0x4e050]+
+V [jvm.dll+0x4ac51]+
j sun.plugin2.main.server.JVMManager.processJREInfo()V32+
j sun.plugin2.main.server.JVMManager.<init>()V86+
j sun.plugin2.main.server.JVMManager.<clinit>()V72+
v ~StubRoutines::call_stub
+V [jvm.dll+0xfae4b]+
+V [jvm.dll+0x18c531]+
+V [jvm.dll+0xfaecd]+
+V [jvm.dll+0x7deb7]+
+V [jvm.dll+0x7ed1e]+
+V [jvm.dll+0x7f009]+
+V [jvm.dll+0x7f126]+
+V [jvm.dll+0x4d719]+
+V [jvm.dll+0x4de7f]+
+V [jvm.dll+0x4e050]+
+V [jvm.dll+0x4ac51]+
j sun.plugin2.main.server.IExplorerPlugin.<clinit>()V41+
v ~StubRoutines::call_stub
+V [jvm.dll+0xfae4b]+
+V [jvm.dll+0x18c531]+
+V [jvm.dll+0xfaecd]+
+V [jvm.dll+0x7deb7]+
+V [jvm.dll+0x7ed1e]+
+V [jvm.dll+0x7f009]+
+V [jvm.dll+0x7f126]+
+V [jvm.dll+0xb2ae9]+
+V [jvm.dll+0x94be8]+
+C [jp2iexp.dll+0x25b6] Java_sun_plugin2_main_server_WindowsHelper_uninstallHook+0xeaa+
+C [jp2iexp.dll+0x3b6b] Java_sun_plugin2_main_server_IExplorerPlugin_fillInExceptionInfo0+0x7ee+
+C [jp2iexp.dll+0xd2a4] DllGetClassObject+0x57c6+
+C [MSHTML.dll+0x156e41] RunHTMLApplication+0x1a9a+
+C [MSHTML.dll+0x156c95] RunHTMLApplication+0x18ee+
+C [MSHTML.dll+0x156cc3] RunHTMLApplication+0x191c+
+C [MSHTML.dll+0x156948] RunHTMLApplication+0x15a1+
+C [MSHTML.dll+0x15675f] RunHTMLApplication+0x13b8+
+C [MSHTML.dll+0x1563bf] RunHTMLApplication+0x1018+
+C [MSHTML.dll+0x15602e] RunHTMLApplication+0xc87+
+C [MSHTML.dll+0x99a35] MatchExactGetIDsOfNames+0x5eed7+
+C [MSHTML.dll+0x262624] CTravelLog_CreateInstance+0x1edcf+
+C [MSHTML.dll+0x29dc6f] DllGetClassObject+0x23eb1+
+C [MSHTML.dll+0x267e1c] CTravelLog_CreateInstance+0x245c7+
+C [MSHTML.dll+0x267d48] CTravelLog_CreateInstance+0x244f3+
+C [MSHTML.dll+0x267cad] CTravelLog_CreateInstance+0x24458+
+C [MSHTML.dll+0x267c0d] CTravelLog_CreateInstance+0x243b8+
+C [MSHTML.dll+0x24b83d] CTravelLog_CreateInstance+0x7fe8+
+C [MSHTML.dll+0x3ea169] DllGetClassObject+0x1703ab+
+C [MSHTML.dll+0x4095e0] DllGetClassObject+0x18f822+
+C [USER32.dll+0x1c4e7] gapfnScSendMessage+0x1cf+
+C [USER32.dll+0x1c5e7] gapfnScSendMessage+0x2cf+
+C [USER32.dll+0x1cc19] gapfnScSendMessage+0x901+
+C [USER32.dll+0x1cc70] DispatchMessageW+0xf+
+C [IEFRAME.dll+0xf1b83] Ordinal234+0x6520+
+C [IEFRAME.dll+0x111ac6] Ordinal224+0x17ff9+
+C [iertutil.dll+0x140150] Ordinal59+0x8b+
+C [IEFRAME.dll+0xffe03] Ordinal224+0x6336+
+C [kernel32.dll+0x53c45] BaseThreadInitThunk+0x12+
+C [ntdll.dll+0x637f5] RtlInitializeExceptionChain+0xef+
+C [ntdll.dll+0x637c8] RtlInitializeExceptionChain+0xc2+
Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
j com.sun.deploy.config.WinConfig.getBrowserPath()Ljava/lang/String;0+
j com.sun.deploy.config.Config.versionUpdateCheck()V392+
j com.sun.deploy.config.Config.initialize()Z256+
j com.sun.deploy.config.Config.<clinit>()V1933+
v ~StubRoutines::call_stub
j sun.plugin2.main.server.JVMManager.processJREInfo()V32+
j sun.plugin2.main.server.JVMManager.<init>()V86+
j sun.plugin2.main.server.JVMManager.<clinit>()V72+
v ~StubRoutines::call_stub
j sun.plugin2.main.server.IExplorerPlugin.<clinit>()V41+
v ~StubRoutines::call_stub
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
+0x03226400 JavaThread "traceMsgQueueThread" daemon [_thread_blocked, id=1796, stack(0x0a8c0000,0x0a9c0000)]+
+0x031e2c00 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=2144, stack(0x0a7b0000,0x0a8b0000)]+
+0x031d3800 JavaThread "C1 CompilerThread0" daemon [_thread_blocked, id=2036, stack(0x050d0000,0x051d0000)]+
+0x031d2800 JavaThread "Attach Listener" daemon [_thread_blocked, id=1268, stack(0x0a5b0000,0x0a6b0000)]+
+0x031d0800 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=1120, stack(0x0a4b0000,0x0a5b0000)]+
+0x031ca000 JavaThread "Finalizer" daemon [_thread_blocked, id=1140, stack(0x09fc0000,0x0a0c0000)]+
+0x031c8c00 JavaThread "Reference Handler" daemon [_thread_blocked, id=2500, stack(0x0a380000,0x0a480000)]+
+=>0x01da8c00 JavaThread "main" [_thread_in_native, id=2380, stack(0x02420000,0x02620000)]+
Other Threads:
+0x0318c800 VMThread [stack: 0x0a1c0000,0x0a2c0000] [id=2672]+
+0x031f2000 WatcherThread [stack: 0x0a9c0000,0x0aac0000] [id=2712]+
VM state:not at safepoint (normal execution)
VM Mutex/Monitor currently owned by a thread: None
Heap
def new generation   total 4928K, used 281K [0x317e0000, 0x31d30000, 0x32280000)
eden space 4416K,   6% used [0x317e0000, 0x31826480, 0x31c30000)
from space 512K,   0% used [0x31c30000, 0x31c30000, 0x31cb0000)
to   space 512K,   0% used [0x31cb0000, 0x31cb0000, 0x31d30000)
tenured generation   total 10944K, used 0K [0x32280000, 0x32d30000, 0x337e0000)
the space 10944K,   0% used [0x32280000, 0x32280000, 0x32280200, 0x32d30000)
compacting perm gen total 12288K, used 371K [0x337e0000, 0x343e0000, 0x377e0000)
the space 12288K,   3% used [0x337e0000, 0x3383cc08, 0x3383ce00, 0x343e0000)
ro space 10240K, 51% used [0x377e0000, 0x37d0dff8, 0x37d0e000, 0x381e0000)
rw space 12288K, 55% used [0x381e0000, 0x3887c208, 0x3887c400, 0x38de0000)
Code Cache [0x0c910000, 0x0c980000, 0x0e910000)
total_blobs=147 nmethods=5 adapters=79 free_code_cache=33098880 largest_free_block=0
Dynamic libraries:
+0x00a40000 - 0x00af8000      C:\Program Files\Internet Explorer\iexplore.exe+
+0x77620000 - 0x7775c000      C:\Windows\SYSTEM32\ntdll.dll+
+0x75f50000 - 0x76024000      C:\Windows\system32\kernel32.dll+
+0x75a70000 - 0x75aba000      C:\Windows\system32\KERNELBASE.dll+
+0x777a0000 - 0x77840000      C:\Windows\system32\ADVAPI32.dll+
+0x75d60000 - 0x75e0c000      C:\Windows\system32\msvcrt.dll+
+0x75ac0000 - 0x75ad9000      C:\Windows\SYSTEM32\sechost.dll+
+0x764a0000 - 0x76541000      C:\Windows\system32\RPCRT4.dll+
+0x77250000 - 0x77319000      C:\Windows\system32\USER32.dll+
+0x76450000 - 0x7649e000      C:\Windows\system32\GDI32.dll+
+0x77840000 - 0x7784a000      C:\Windows\system32\LPK.dll+
+0x76550000 - 0x765ed000      C:\Windows\system32\USP10.dll+
+0x75ee0000 - 0x75f37000      C:\Windows\system32\SHLWAPI.dll+
+0x765f0000 - 0x7723a000      C:\Windows\system32\SHELL32.dll+
+0x774c0000 - 0x7761c000      C:\Windows\system32\ole32.dll+
+0x75c20000 - 0x75d30000      C:\Windows\system32\urlmon.dll+
+0x76080000 - 0x7610f000      C:\Windows\system32\OLEAUT32.dll+
+0x76110000 - 0x762c6000      C:\Windows\system32\iertutil.dll+
+0x762d0000 - 0x763ea000      C:\Windows\system32\WININET.dll+
+0x75f40000 - 0x75f43000      C:\Windows\system32\Normaliz.dll+
+0x75d40000 - 0x75d5f000      C:\Windows\system32\IMM32.DLL+
+0x75e10000 - 0x75edc000      C:\Windows\system32\MSCTF.dll+
+0x66850000 - 0x67195000      C:\Windows\system32\IEFRAME.dll+
+0x77240000 - 0x77245000      C:\Windows\system32\PSAPI.DLL+
+0x73850000 - 0x7388c000      C:\Windows\system32\OLEACC.dll+
+0x743d0000 - 0x7456e000      C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_41e6975e2bd6f2b2\comctl32.dll+
+0x75b70000 - 0x75beb000      C:\Windows\system32\comdlg32.dll+
+0x73600000 - 0x73631000      C:\Program Files\Internet Explorer\IEShims.dll+
+0x75740000 - 0x7574c000      C:\Windows\system32\CRYPTBASE.dll+
+0x75590000 - 0x75598000      C:\Windows\system32\Secur32.dll+
+0x756d0000 - 0x756eb000      C:\Windows\system32\SSPICLI.DLL+
+0x757c0000 - 0x757cb000      C:\Windows\system32\profapi.dll+
+0x77760000 - 0x77795000      C:\Windows\system32\WS2_32.dll+
+0x75d30000 - 0x75d36000      C:\Windows\system32\NSI.dll+
+0x750a0000 - 0x750e4000      C:\Windows\system32\dnsapi.DLL+
+0x72fa0000 - 0x72fbc000      C:\Windows\system32\iphlpapi.DLL+
+0x72f90000 - 0x72f97000      C:\Windows\system32\WINNSI.DLL+
+0x757b0000 - 0x757be000      C:\Windows\system32\RpcRtRemote.dll+
+0x63ef0000 - 0x64aa8000      C:\Windows\system32\MSHTML.dll+
+0x74cb0000 - 0x74cb9000      C:\Windows\system32\VERSION.dll+
+0x6f5f0000 - 0x6f6aa000      C:\Windows\system32\d2d1.dll+
+0x6c8a0000 - 0x6c9aa000      C:\Windows\system32\DWrite.dll+
+0x6d3c0000 - 0x6d443000      C:\Windows\system32\dxgi.dll+
+0x739d0000 - 0x739e3000      C:\Windows\system32\dwmapi.dll+
+0x75300000 - 0x75316000      C:\Windows\system32\CRYPTSP.dll+
+0x758d0000 - 0x758fd000      C:\Windows\system32\WINTRUST.dll+
+0x75950000 - 0x75a6d000      C:\Windows\system32\CRYPT32.dll+
+0x75830000 - 0x7583c000      C:\Windows\system32\MSASN1.dll+
+0x74b70000 - 0x74b91000      C:\Windows\system32\ntmarta.dll+
+0x76030000 - 0x76075000      C:\Windows\system32\WLDAP32.dll+
+0x75000000 - 0x7503b000      C:\Windows\system32\rsaenh.dll+
+0x75ae0000 - 0x75b63000      C:\Windows\system32\CLBCatQ.DLL+
+0x69240000 - 0x69272000      C:\Program Files\Internet Explorer\ieproxy.dll+
+0x756f0000 - 0x7573c000      C:\Windows\system32\apphelp.dll+
+0x74130000 - 0x74263000      C:\Windows\System32\msxml3.dll+
+0x75750000 - 0x757af000      C:\Windows\system32\SXS.DLL+
+0x73d90000 - 0x73d9b000      C:\Windows\system32\msimtf.dll+
+0x6d390000 - 0x6d3bb000      C:\Windows\system32\msls31.dll+
+0x77320000 - 0x774bd000      C:\Windows\system32\setupapi.dll+
+0x75920000 - 0x75947000      C:\Windows\system32\CFGMGR32.dll+
+0x75900000 - 0x75912000      C:\Windows\system32\DEVOBJ.dll+
+0x73570000 - 0x7359c000      C:\Windows\system32\d3d10_1.dll+
+0x734b0000 - 0x734ea000      C:\Windows\system32\d3d10_1core.dll+
+0x6c770000 - 0x6c89c000      C:\Windows\system32\D3D10Warp.dll+
+0x69760000 - 0x6978e000      C:\Windows\system32\MLANG.dll+
+0x74970000 - 0x74a65000      C:\Windows\system32\PROPSYS.dll+
+0x6ab00000 - 0x6ac02000      C:\Windows\system32\d3d10.dll+
+0x73520000 - 0x73553000      C:\Windows\system32\d3d10core.dll+
+0x73d40000 - 0x73d80000      C:\Windows\system32\UxTheme.dll+
+0x73180000 - 0x731d2000      C:\Windows\system32\RASAPI32.dll+
+0x73160000 - 0x73175000      C:\Windows\system32\rasman.dll+
+0x73150000 - 0x7315d000      C:\Windows\system32\rtutils.dll+
+0x6f6b0000 - 0x6f6b6000      C:\Windows\system32\sensapi.dll+
+0x75190000 - 0x751cc000      C:\Windows\system32\mswsock.dll+
+0x74d40000 - 0x74d45000      C:\Windows\System32\wshtcpip.dll+
+0x747f0000 - 0x74815000      C:\Windows\system32\peerdist.dll+
+0x74e00000 - 0x74e17000      C:\Windows\system32\USERENV.dll+
+0x753f0000 - 0x7540b000      C:\Windows\system32\AUTHZ.dll+
+0x747e0000 - 0x747f0000      C:\Windows\system32\NLAapi.dll+
+0x72330000 - 0x72336000      C:\Windows\system32\rasadhlp.dll+
+0x75180000 - 0x75186000      C:\Windows\System32\wship6.dll+
+0x72b90000 - 0x72bc8000      C:\Windows\System32\fwpuclnt.dll+
+0x695a0000 - 0x6975b000      C:\Windows\System32\jscript9.dll+
+0x72de0000 - 0x72e1a000      C:\Windows\System32\Dxtrans.dll+
+0x74790000 - 0x747a4000      C:\Windows\System32\ATL.DLL+
+0x74330000 - 0x7433a000      C:\Windows\system32\ddrawex.dll+
+0x694b0000 - 0x69597000      C:\Windows\system32\DDRAW.dll+
+0x742d0000 - 0x742d6000      C:\Windows\system32\DCIMAN32.dll+
+0x6c710000 - 0x6c769000      C:\Windows\System32\Dxtmsft.dll+
+0x73a00000 - 0x73afb000      C:\Windows\system32\windowscodecs.dll+
+0x6cf70000 - 0x6cfa2000      C:\Windows\system32\WINMM.dll+
+0x739a0000 - 0x739cf000      C:\Windows\system32\XmlLite.dll+
+0x74310000 - 0x74317000      C:\Windows\system32\msiltcfg.dll+
+0x6c410000 - 0x6c650000      C:\Windows\system32\msi.dll+
+0x6ac70000 - 0x6acb7000      C:\Windows\system32\Adobe\Director\SwDir.dll+
+0x6c6d0000 - 0x6c703000      C:\Windows\system32\windowscodecsext.dll+
+0x69790000 - 0x69809000      C:\Windows\system32\mscms.dll+
+0x6ac30000 - 0x6ac68000      C:\Windows\system32\icm32.dll+
+0x69410000 - 0x694ad000      C:\Windows\system32\Adobe\Shockwave 11\Control.dll+
+0x6e810000 - 0x6e861000      C:\Windows\system32\winspool.drv+
+0x69390000 - 0x69402000      C:\Windows\system32\DSOUND.dll+
+0x74ac0000 - 0x74ae5000      C:\Windows\system32\POWRPROF.dll+
+0x74a70000 - 0x74aa9000      C:\Windows\System32\MMDevApi.dll+
+0x73960000 - 0x73996000      C:\Windows\system32\AUDIOSES.DLL+
+0x736e0000 - 0x736ec000      C:\Windows\system32\mssprxy.dll+
+0x69320000 - 0x6938a000      C:\Windows\system32\vbscript.dll+
+0x653b0000 - 0x659de000      C:\Windows\system32\Macromed\Flash\Flash10t.ocx+
+0x74f70000 - 0x74f78000      C:\Windows\system32\credssp.dll+
+0x74f20000 - 0x74f5a000      C:\Windows\system32\schannel.DLL+
+0x67430000 - 0x674f8000      C:\Windows\system32\OPENGL32.DLL+
+0x68ce0000 - 0x68d02000      C:\Windows\system32\GLU32.dll+
+0x10000000 - 0x10dc0000      C:\Windows\system32\ig4icd32.dll+
+0x68c70000 - 0x68cd4000      C:\Windows\system32\D3DIM.DLL+
+0x67360000 - 0x6742c000      C:\Windows\system32\D3DIM700.DLL+
+0x01d40000 - 0x01d5f000      C:\Program Files\Java\jre6\bin\jp2iexp.dll+
+0x7c340000 - 0x7c396000      C:\Program Files\Java\jre6\bin\MSVCR71.dll+
+0x72d30000 - 0x72d37000      C:\Windows\system32\wsock32.dll+
+0x71b10000 - 0x71b20000      C:\Windows\system32\napinsp.dll+
+0x71af0000 - 0x71b02000      C:\Windows\system32\pnrpnsp.dll+
+0x720d0000 - 0x720d8000      C:\Windows\System32\winrnr.dll+
+0x71ae0000 - 0x71aed000      C:\Windows\system32\wshbth.dll+
+0x6f8f0000 - 0x6f974000      C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_5.82.7601.17514_none_ec83dffa859149af\comctl32.dll+
+0x6d7f0000 - 0x6da9f000      C:\PROGRA~1\Java\jre6\bin\client\jvm.dll+
+0x6d7a0000 - 0x6d7ac000      C:\PROGRA~1\Java\jre6\bin\verify.dll+
+0x6d320000 - 0x6d33f000      C:\PROGRA~1\Java\jre6\bin\java.dll+
+0x6d7e0000 - 0x6d7ef000      C:\PROGRA~1\Java\jre6\bin\zip.dll+
+0x01dc0000 - 0x01dc6000      C:\Program Files\Java\jre6\bin\jp2native.dll+
+0x6d1d0000 - 0x6d1e3000      C:\Program Files\Java\jre6\bin\deploy.dll+
VM Arguments:
jvm_args: -Xbootclasspath/a:C:\PROGRA~1\Java\jre6\lib\deploy.jar;C:\PROGRA~1\Java\jre6\lib\javaws.jar;C:\PROGRA~1\Java\jre6\lib\plugin.jar -Xmx32m -Djava.awt.headless=true -Dkernel.background.download=false -Dkernel.download.dialog=false -XX:MaxDirectMemorySize=64m
java_command: <unknown>
Launcher Type: generic
Environment Variables:
PATH=C:\Program Files\Internet Explorer;;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Windows\system32\Empirum
USERNAME=%username%
OS=Windows_NT
PROCESSOR_IDENTIFIER=x86 Family 6 Model 42 Stepping 7, GenuineIntel
--------------- S Y S T E M ---------------
OS: Windows 7 Build 7601 Service Pack 1
CPU:total 4 (2 cores per cpu, 2 threads per core) family 6 model 42 stepping 7, cmov, cx8, fxsr, mmx, sse, sse2, sse3, ssse3, sse4.1, sse4.2, popcnt, ht
Memory: 4k page, physical 3063864k(2285416k free), swap 6125972k(5328168k free)
vm_info: Java HotSpot(TM) Client VM (20.1-b02) for windows-x86 JRE (1.6.0_26-b03), built on May 4 2011 00:50:59 by "java_re" with MS VC+ 7.1 (VS2003)+
time: Thu Jun 30 17:20:35 2011
elapsed time: 0 seconds

user11262844 wrote:
Since we're planning a corporate Windows 7 rollout (>800PCs) we cannot do this manually on every computer. Ther must be any solution for this problem.If you're doing a corporate rollout of that size then surely you're just making an image of the desired configuration and just duplicating it onto the 800 PCs? In which case you would just configure IE appropriately as part of the image.
Or alternatively you are manually configuring each of the 800 PCs, in which case this would be just one more thing in the checklist.

Amavisd not running, mails not delivered when spam filter is enabled

Hey everyone,
So I've got a slight problem here with a 10.4.11 server. Our spam filter was set to be too tolerant of spam, allowing a threshold 22.0 before bouncing it, so through the command line I edited /etc/amavisd.conf to $sa_kill_level_deflt = 6.0; tag2 is set to 3.0. Then I bounced amavisd via:
sudo /bin/launchctl unload /System/Library/LaunchDaemons/org.amavis.amavisd.plist
sudo /bin/launchctl load /System/Library/LaunchDaemons/org.amavis.amavisd.plist
Well that caused all sorts of whacky issues with the queue. The server couldn't connect to itself and wouldn't deliver any mail, only queue it up. So I went back in to amavisd.conf and changed the parameters back to default, then bounced amavisd again. To no avail. Then I restored from a backup file I had created and bounced amavisd again to no avail.
Finally I removed the junkmail and virus filters via SA, saved, then reenabled them to no avail. Then I just disabled them and mail is flowing again, but I still have 187 messages in my queue that wont get delivered no matter how many times I flush it.
After more research, I issued a ps -U clamav to see if amavisd is running, below are the only results I get:
PID TT STAT TIME COMMAND
1291 ?? Ss 0:00.01 freshclam -d -D -pfreshclam.pid -c 1
I would assume it is NOT running...? I next issued amavisd to see if it throws any errors, and get the following:
ERROR: MISSING REQUIRED BASIC MODULES:
MIME::Parser
BEGIN failed--compilation aborted at /usr/bin/amavisd line 139.
So my next question is how do I repair amavisd so I can get it to run so I can reenable the content filter. Here are the results of postconf in case you need them:
2bounce_notice_recipient = postmaster
access_map_reject_code = 554
address_verify_default_transport = $default_transport
address_verify_local_transport = $local_transport
address_verify_map =
address_verify_negative_cache = yes
address_verify_negative_expire_time = 3d
address_verify_negative_refresh_time = 3h
address_verify_poll_count = 3
address_verify_poll_delay = 3s
address_verify_positive_expire_time = 31d
address_verify_positive_refresh_time = 7d
address_verify_relay_transport = $relay_transport
address_verify_relayhost = $relayhost
address_verify_sender = postmaster
address_verify_service_name = verify
address_verify_transport_maps = $transport_maps
address_verify_virtual_transport = $virtual_transport
alias_database = hash:/etc/aliases
alias_maps = hash:/etc/aliases
allow_mail_to_commands = alias, forward
allow_mail_to_files = alias, forward
allow_min_user = no
allow_percent_hack = yes
allow_untrusted_routing = no
alternate_config_directories =
always_bcc =
append_at_myorigin = yes
append_dot_mydomain = yes
application_event_drain_time = 100s
backwards_bounce_logfile_compatibility = yes
berkeley_db_create_buffer_size = 16777216
berkeley_db_read_buffer_size = 131072
best_mx_transport =
biff = yes
body_checks =
body_checks_size_limit = 51200
bounce_notice_recipient = postmaster
bounce_queue_lifetime = 5d
bounce_service_name = bounce
bounce_size_limit = 50000
broken_sasl_auth_clients = no
canonical_maps =
cleanup_service_name = cleanup
command_directory = /usr/sbin
command_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
command_time_limit = 1000s
config_directory = /etc/postfix
content_filter =
daemon_directory = /usr/libexec/postfix
daemon_timeout = 18000s
debug_peer_level = 2
debug_peer_list =
default_database_type = hash
default_delivery_slot_cost = 5
default_delivery_slot_discount = 50
default_delivery_slot_loan = 3
default_destination_concurrency_limit = 20
default_destination_recipient_limit = 50
default_extra_recipient_limit = 1000
default_minimum_delivery_slots = 3
default_privs = nobody
default_process_limit = 100
default_rbl_reply = $rbl_code Service unavailable; $rbl_class [$rbl_what] blocked using $rbl_domain${rbl_reason?; $rbl_reason}
default_recipient_limit = 10000
default_transport = smtp
default_verp_delimiters = +=
defer_code = 450
defer_service_name = defer
defer_transports =
delay_notice_recipient = postmaster
delay_warning_time = 0h
deliver_lock_attempts = 20
deliver_lock_delay = 1s
disable_dns_lookups = no
disable_mime_input_processing = no
disable_mime_output_conversion = no
disable_verp_bounces = no
disable_vrfy_command = no
dont_remove = 0
double_bounce_sender = double-bounce
duplicate_filter_limit = 1000
empty_address_recipient = MAILER-DAEMON
enable_errors_to = no
enable_original_recipient = yes
enable_server_options = yes
error_notice_recipient = postmaster
error_service_name = error
expand_owner_alias = no
export_environment = TZ MAIL_CONFIG
fallback_relay =
fallback_transport =
fast_flush_domains = $relay_domains
fast_flush_purge_time = 7d
fast_flush_refresh_time = 12h
fault_injection_code = 0
flush_service_name = flush
fork_attempts = 5
fork_delay = 1s
forward_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
forward_path = $home/.forward${recipient_delimiter}${extension}, $home/.forward
hash_queue_depth = 1
hash_queue_names = incoming, active, deferred, bounce, defer, flush, hold, trace
header_address_token_limit = 10240
header_checks =
header_size_limit = 102400
helpful_warnings = yes
home_mailbox =
hopcount_limit = 50
html_directory = no
ignore_mx_lookup_error = no
import_environment = MAIL_CONFIG MAIL_DEBUG MAIL_LOGTAG TZ XAUTHORITY DISPLAY
in_flow_delay = 1s
inet_interfaces = all
initial_destination_concurrency = 5
invalid_hostname_reject_code = 501
ipc_idle = 100s
ipc_timeout = 3600s
ipc_ttl = 1000s
line_length_limit = 2048
lmtp_cache_connection = yes
lmtp_connect_timeout = 0s
lmtp_data_done_timeout = 600s
lmtp_data_init_timeout = 120s
lmtp_data_xfer_timeout = 180s
lmtp_destination_concurrency_limit = $default_destination_concurrency_limit
lmtp_destination_recipient_limit = $default_destination_recipient_limit
lmtp_lhlo_timeout = 300s
lmtp_mail_timeout = 300s
lmtp_quit_timeout = 300s
lmtp_rcpt_timeout = 300s
lmtp_rset_timeout = 120s
lmtp_sasl_auth_enable = no
lmtp_sasl_password_maps =
lmtp_sasl_security_options = noplaintext, noanonymous
lmtp_send_xforward_command = no
lmtp_skip_quit_response = no
lmtp_tcp_port = 24
lmtp_xforward_timeout = 300s
local_command_shell =
local_destination_concurrency_limit = 2
local_destination_recipient_limit = 1
local_recipient_maps =
local_transport = local:$myhostname
luser_relay = undeliverable
mail_name = Postfix
mail_owner = postfix
mail_release_date = 20040915
mail_spool_directory = /var/mail
mail_version = 2.1.5
mailbox_command =
mailbox_command_maps =
mailbox_delivery_lock = flock
mailbox_size_limit = 0
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
maps_rbl_domains =
maps_rbl_reject_code = 554
masquerade_classes = envelope_sender, header_sender, header_recipient
masquerade_domains =
masquerade_exceptions =
max_idle = 100s
max_use = 100
maximal_backoff_time = 4000s
maximal_queue_lifetime = 5d
message_size_limit = 0
mime_boundary_length_limit = 2048
mime_header_checks = $header_checks
mime_nesting_limit = 100
minimal_backoff_time = 1000s
multi_recipient_bounce_reject_code = 550
mydestination = $myhostname,localhost.$mydomain,localhost,mail.mnn.org,$mydomain,youthchannel.o rg,mnn.org
mydomain = mnn.org
mydomain_fallback = localhost
myhostname = mail.mnn.org
mynetworks = 127.0.0.0/8,192.168.0.0/16,216.164.83.160/27
mynetworks_style = host
myorigin = $myhostname
nested_header_checks = $header_checks
newaliases_path = /usr/bin/newaliases
non_fqdn_reject_code = 504
notify_classes = resource, software
owner_request_special = yes
parent_domain_matches_subdomains = debug_peer_list,fast_flush_domains,mynetworks,permit_mx_backup_networks,qmqpd_a uthorized_clients,relay_domains,smtpd_access_maps
permit_mx_backup_networks =
pickup_service_name = pickup
prepend_delivered_header = command, file, forward
process_id_directory = pid
propagate_unmatched_extensions = canonical, virtual
proxy_interfaces =
proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks
qmgr_clog_warn_time = 300s
qmgr_fudge_factor = 100
qmgr_message_active_limit = 20000
qmgr_message_recipient_limit = 20000
qmgr_message_recipient_minimum = 10
qmqpd_authorized_clients =
qmqpd_error_delay = 1s
qmqpd_timeout = 300s
queue_directory = /private/var/spool/postfix
queue_file_attribute_count_limit = 100
queue_minfree = 0
queue_run_delay = 1000s
queue_service_name = qmgr
rbl_reply_maps =
readme_directory = /usr/share/doc/postfix
receive_override_options =
recipient_bcc_maps =
recipient_canonical_maps =
recipient_delimiter =
reject_code = 554
relay_clientcerts =
relay_destination_concurrency_limit = $default_destination_concurrency_limit
relay_destination_recipient_limit = $default_destination_recipient_limit
relay_domains = $mydestination
relay_domains_reject_code = 554
relay_recipient_maps =
relay_transport = relay
relayhost =
relocated_maps =
require_home_directory = no
resolve_dequoted_address = yes
resolve_null_domain = no
rewrite_service_name = rewrite
sample_directory = /usr/share/doc/postfix/examples
sender_based_routing = no
sender_bcc_maps =
sender_canonical_maps =
sendmail_path = /usr/sbin/sendmail
service_throttle_time = 60s
setgid_group = postdrop
show_user_unknown_table_name = yes
showq_service_name = showq
smtp_always_send_ehlo = yes
smtp_bind_address =
smtp_connect_timeout = 30s
smtp_data_done_timeout = 600s
smtp_data_init_timeout = 120s
smtp_data_xfer_timeout = 180s
smtp_defer_if_no_mx_address_found = no
smtp_destination_concurrency_limit = $default_destination_concurrency_limit
smtp_destination_recipient_limit = $default_destination_recipient_limit
smtp_enforce_tls = no
smtp_helo_name = $myhostname
smtp_helo_timeout = 300s
smtp_host_lookup = dns
smtp_line_length_limit = 990
smtp_mail_timeout = 300s
smtp_mx_address_limit = 0
smtp_mx_session_limit = 2
smtp_never_send_ehlo = no
smtp_pix_workaround_delay_time = 10s
smtp_pix_workaround_threshold_time = 500s
smtp_quit_timeout = 300s
smtp_quote_rfc821_envelope = yes
smtp_randomize_addresses = yes
smtp_rcpt_timeout = 300s
smtp_rset_timeout = 120s
smtp_sasl_auth_enable = no
smtp_sasl_password_maps =
smtp_sasl_security_options = noplaintext, noanonymous
smtp_sasl_tls_security_options = $var_smtp_sasl_opts
smtp_sasl_tls_verified_security_options = $var_smtp_sasl_tls_opts
smtp_send_xforward_command = no
smtp_skip_5xx_greeting = yes
smtp_skip_quit_response = yes
smtp_starttls_timeout = 300s
smtp_tls_CAfile =
smtp_tls_CApath =
smtp_tls_cert_file =
smtp_tls_cipherlist =
smtp_tls_dcert_file =
smtp_tls_dkey_file = $smtp_tls_dcert_file
smtp_tls_enforce_peername = yes
smtp_tls_key_file = $smtp_tls_cert_file
smtp_tls_loglevel = 0
smtp_tls_note_starttls_offer = no
smtp_tls_per_site =
smtp_tls_scert_verifydepth = 5
smtp_tls_session_cache_database =
smtp_tls_session_cache_timeout = 3600s
smtp_use_tls = no
smtp_xforward_timeout = 300s
smtpd_authorized_verp_clients = $authorized_verp_clients
smtpd_authorized_xclient_hosts =
smtpd_authorized_xforward_hosts =
smtpd_banner = $myhostname ESMTP $mail_name
smtpd_client_connection_count_limit = 50
smtpd_client_connection_limit_exceptions = $mynetworks
smtpd_client_connection_rate_limit = 0
smtpd_client_restrictions = permit_mynetworks reject_rbl_client zen.spamhaus.org reject_rbl_client bl.spamcop.net permit
smtpd_data_restrictions =
smtpd_delay_reject = yes
smtpd_enforce_tls = no
smtpd_error_sleep_time = 1s
smtpd_etrn_restrictions =
smtpd_expansion_filter = \t\40!"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\\]^_`abcdefghi jklmnopqrstuvwxyz{|}~
smtpd_hard_error_limit = 20
smtpd_helo_required = no
smtpd_helo_restrictions =
smtpd_history_flush_threshold = 100
smtpd_junk_command_limit = 100
smtpd_noop_commands =
smtpd_null_access_lookup_key =
smtpd_policy_service_max_idle = 300s
smtpd_policy_service_max_ttl = 1000s
smtpd_policy_service_timeout = 100s
smtpd_proxy_ehlo = $myhostname
smtpd_proxy_filter =
smtpd_proxy_timeout = 100s
smtpd_pw_server_security_options = gssapi,cram-md5,login,plain
smtpd_recipient_limit = 1000
smtpd_recipient_overshoot_limit = 1000
smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination,permit
smtpd_reject_unlisted_recipient = yes
smtpd_reject_unlisted_sender = no
smtpd_restriction_classes =
smtpd_sasl_application_name = smtpd
smtpd_sasl_auth_enable = yes
smtpd_sasl_exceptions_networks =
smtpd_sasl_local_domain =
smtpd_sasl_security_options = noanonymous
smtpd_sasl_tls_security_options = $smtpd_sasl_security_options
smtpd_sender_login_maps =
smtpd_sender_restrictions =
smtpd_soft_error_limit = 10
smtpd_starttls_timeout = 300s
smtpd_timeout = 300s
smtpd_tls_CAfile =
smtpd_tls_CApath =
smtpd_tls_ask_ccert = no
smtpd_tls_auth_only = no
smtpd_tls_ccert_verifydepth = 5
smtpd_tls_cert_file =
smtpd_tls_cipherlist =
smtpd_tls_dcert_file =
smtpd_tls_dh1024_param_file =
smtpd_tls_dh512_param_file =
smtpd_tls_dkey_file = $smtpd_tls_dcert_file
smtpd_tls_key_file =
smtpd_tls_loglevel = 0
smtpd_tls_received_header = no
smtpd_tls_req_ccert = no
smtpd_tls_session_cache_database =
smtpd_tls_session_cache_timeout = 3600s
smtpd_tls_wrappermode = no
smtpd_use_pw_server = yes
smtpd_use_tls = no
soft_bounce = no
stale_lock_time = 500s
strict_7bit_headers = no
strict_8bitmime = no
strict_8bitmime_body = no
strict_mime_encoding_domain = no
strict_rfc821_envelopes = no
sun_mailtool_compatibility = no
swap_bangpath = yes
syslog_facility = mail
syslog_name = postfix
tls_daemon_random_bytes = 32
tls_daemon_random_source =
tls_random_bytes = 32
tls_random_exchange_name = ${config_directory}/prng_exch
tls_random_prng_update_period = 60s
tls_random_reseed_period = 3600s
tls_random_source =
trace_service_name = trace
transport_maps =
transport_retry_time = 60s
trigger_timeout = 10s
undisclosed_recipients_header = To: undisclosed-recipients:;
unknown_address_reject_code = 450
unknown_client_reject_code = 450
unknown_hostname_reject_code = 450
unknown_local_recipient_reject_code = 550
unknown_relay_recipient_reject_code = 550
unknown_virtual_alias_reject_code = 550
unknown_virtual_mailbox_reject_code = 550
unverified_recipient_reject_code = 450
unverified_sender_reject_code = 450
verp_delimiter_filter = -=+
virtual_alias_domains = $virtual_alias_maps
virtual_alias_expansion_limit = 1000
virtual_alias_maps = $virtual_maps
virtual_alias_recursion_limit = 1000
virtual_destination_concurrency_limit = $default_destination_concurrency_limit
virtual_destination_recipient_limit = $default_destination_recipient_limit
virtual_gid_maps =
virtual_mailbox_base =
virtual_mailbox_domains = $virtual_mailbox_maps
virtual_mailbox_limit = 51200000
virtual_mailbox_lock = fcntl
virtual_mailbox_maps =
virtual_minimum_uid = 100
virtual_transport = virtual
virtual_uid_maps =
TIA for an help!
Andrew

To get the queue going, issue:
sudo postsuper -r ALL
That said, I would think you initially introduced a typo in amavisd.conf. Next you probably restored amavisd and amavisd.conf files which were incompatible with each other and/or amavis incompatible with the updated perl modules of the latest security update.
To fix things, I would re-apply the latest combo updater and security updates (assuming you are running stock versions and have not installed your own versions of amavisd, etc).
If things still do not work, please post the output of:
amavisd -V

Service not running logged an alert?

Hello,
There is a service on a Linux machine I don't want it to run.
I am getting an alert from SCOM:
Alert: SUSE Linux Enterprise Server 11 Process Klog Monitor Alert
Resolution state: New
Source: SUSE Linux Enterprise Server 11 (x86_64)
Path: Server
Last modified by: System
Last modified time: 4/21/2014 6:54:58 AM
Alert description: The KLOGD - Kernel Message Logging daemon on server Server is not running.
I could disable the alert for this service on this server Server but anyway to prevent the server Server to send this information. I know in Windows if the startup type is set to "Automatic" SCOM is looking for a service running, if the Startup
type is set to manual no check.
Do we have the same type of check in Linux?
Thanks,
Dom
System Center Operations Manager 2007 / System Center Configuration Manager 2007 R2 / Forefront Client Security / Forefront Identity Manager

Dom,
Doesn't work the same as Windows. Just override the monitor in the MP and disable it from monitoring the klog daemon.
Regards,
-Steve

Cron jobs not running

Hi
I am using linux 5.x
uname -r
2.6.18-348.16.1.0.1.el5PAE
I have 2 crontab jobs set up as following .
cat backup_confluence.sh
#!/bin/bash
# bash shell script to backup confluence backups to bccpfr
# Schedule this script after the backups are performed that day
# Setup the environment for the bourne-again shell
. ./.bash_profile
# Copy the daily backups for confluence
find /usr/share/confluence/data/backups -mtime -1 \! -type d -exec ls {} \; -exec scp {} bccpfr:/usr/backup/confluence \;
second
cat backup_jira.sh
#!/bin/bash
# bash shell script to backup jira backups to bccpfr
# Schedule this script after the backups are performed that day
# Setup the environment for the bourne-again shell
. ./.bash_profile
# Copy the daily backups for jira
find /usr/share/jira/backups -mtime -1 \! -type d -exec ls {} \; -exec scp {} bccpfr:/usr/backup/jira \;
cron as following
$ crontab -l
13 06 * * * /home/lsg/backup_jira.sh
18 06 * * * /home/lsg/backup_confluence.sh
Issue
Both the above .sh are running properly when executed manually but they are not running automatically at the given time crontab job.
Kindly help me on this issue.
many thanks
J

Is your crontask not running at all or is the scheduled task failing?
Hey Tommy I sent you some replies yesterday; don't know what happened to them. Yes I can see that crond runs every ten minutes. Also when I created the crontab file using the command you sent here I could see that it was running every minute by looking at root mail in /var/log.
Do you have execute permission set on the scripts?
Yes
Any info in /var/log/messages or e-mail?
Output from mail-
From root@razorback Tue Feb 11 08:19:01 2014
Return-Path: <root@razorback>
Received: from razorback (localhost [127.0.0.1])
    by razorback (8.13.8/8.13.8) with ESMTP id s1BEJ154018231
    for <root@razorback>; Tue, 11 Feb 2014 08:19:01 -0600
Received: (from root@localhost)
    by razorback (8.13.8/8.13.8/Submit) id s1BEJ1rh018198;
    Tue, 11 Feb 2014 08:19:01 -0600
Date: Tue, 11 Feb 2014 08:19:01 -0600
Message-Id: <201402111419.s1BEJ1rh018198@razorback>
From: root@razorback (Cron Daemon)
To: root@razorback
Subject: Cron <root@razorback> $(date) >> /tmp/cronout
Content-Type: text/plain; charset=UTF-8
Auto-Submitted: auto-generated
X-Cron-Env: <SHELL=/bin/sh>
X-Cron-Env: <HOME=/root>
X-Cron-Env: <PATH=/usr/bin:/bin>
X-Cron-Env: <LOGNAME=root>
X-Cron-Env: <USER=root>
/bin/sh: Tue: command not found
From root@razorback Tue Feb 11 08:20:02 2014
Return-Path: <root@razorback>
Received: from razorback (localhost [127.0.0.1])
    by razorback (8.13.8/8.13.8) with ESMTP id s1BEK2BD018267
    for <root@razorback>; Tue, 11 Feb 2014 08:20:02 -0600
Received: (from root@localhost)
    by razorback (8.13.8/8.13.8/Submit) id s1BEK1mT018238;
    Tue, 11 Feb 2014 08:20:01 -0600
Date: Tue, 11 Feb 2014 08:20:01 -0600
Message-Id: <201402111420.s1BEK1mT018238@razorback>
From: root@razorback (Cron Daemon)
To: root@razorback
Subject: Cron <root@razorback> $(date) >> /tmp/cronout
Content-Type: text/plain; charset=UTF-8
Auto-Submitted: auto-generated
X-Cron-Env: <SHELL=/bin/sh>
X-Cron-Env: <HOME=/root>
X-Cron-Env: <PATH=/usr/bin:/bin>
X-Cron-Env: <LOGNAME=root>
X-Cron-Env: <USER=root>
/bin/sh: Tue: command not found

Launchd daemon not starting correctly on launch

Hi All,
I have a script that I like to have run anytime my wireless network changes. The script needs to be run under sudo, so I created a daemon inside of /Library/LaunchDaemons .
My plist file looks like this:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
          <key>Disabled</key>
               <false/>
          <key>Label</key>
               <string>my.plist.name</string>
          <key>ProgramArguments</key>
               <array>
                              <string>/path/to/script/to/run.sh</string>
               </array>
          <key>WatchPaths</key>
               <array>
                              <string>/Library/Preferences/SystemConfiguration/com.apple.airport.pr eferences.plist</string>
               </array>
</dict>
</plist>
So here's where the oddness starts happening. When I start up my computer, launchctl tells me that this daemon is loaded. (I run sudo launchctl list and it's there). However, the script does not run when it should.
However, if I manually unload and then load the plist using the launchctl command then everything works completely fine.
So the question is, why does it work when I load it manually, but not work when the system loads it on startup?
Thanks,
Q

No suspicious message in the console. When I sudo launchctl list it shows up with a 0 in the second field.
The only thing I can find in doing some google-ing is this:
https://managingosx.wordpress.com/2006/05/10/launchd-gotcha/
Which seems to imply that a launch daemon that is watching a file will fail to work if that file doesn't exist at all times. However, I would think that /Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist should always exist. So I'm still perplexed.
Right now I have a seomwhat convoluted system set up as the following:
My launch daemon (that needs to run as root) is set to watch a folder ~/random/
Then I have a launch agent which successfully watches for changes in /Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist and when it sees them touches a file in ~/random/.
The launch daemon then deletes that file and successfully runs the script I want it to run.
It seems weird/odd/annoying to have to set up a this double-headed process just to do something simple like this, so I'm open to suggestions as to what is going on.

Problem with OVM Server 3.2.6 - xend not running

Hi, just now I upgraded my server to OVM Server 3.2.6 version and server boots up, cluster is up but I have message that Hypervisor is running in UNDETERMINED bit mode (WARNING: XEND IS PROBABLY NOT RUNNING). While boot I saw message that xend failed to start because "mount point /proc/xen does not exist". Also when it tries to start xend, there is message "xencommons should be started first". Reinstalling OVMS did not help. Does anyone have this problem?
Thanks.

For me, it looks like the same.
1 - Yes
2 - B
3 - Not yet, I've tried to downgrade to 3.2.4, but it is not possible.
4.1 - service xend status:
xc: error: Could not obtain handle on privileged command interface (2 = No such file or directory): Internal error
Traceback (most recent call last):
File "/usr/sbin/xend", line 36, in ?
    from xen.xend.server import SrvDaemon
File "/usr/lib64/python2.4/site-packages/xen/xend/server/SrvDaemon.py", line 26, in ?
    import relocate
File "/usr/lib64/python2.4/site-packages/xen/xend/server/relocate.py", line 28, in ?
    from xen.xend import XendDomain
File "/usr/lib64/python2.4/site-packages/xen/xend/XendDomain.py", line 36, in ?
    from xen.xend import XendOptions, XendCheckpoint, XendDomainInfo
File "/usr/lib64/python2.4/site-packages/xen/xend/XendCheckpoint.py", line 20, in ?
    from xen.xend import balloon, sxp, image
File "/usr/lib64/python2.4/site-packages/xen/xend/image.py", line 46, in ?
    xc = xen.lowlevel.xc.xc()
xen.lowlevel.xc.Error: (1, 'Internal error', 'xc_interface_open failed: No such file or directory')
xend daemon is stopped
4.2 - service ovs-agent status:
log server (pid 4460) is running...
notification server (pid 4489) is running...
remaster server (pid 4492) is running...
monitor server (pid 4494) is running...
ha server (pid 4496) is running...
stats server (pid 4498) is running...
xmlrpc server (pid 4499) is running...

Apex Tomcat server is not running

oracle version :10g
apex Version :4.0
OS :unix
1.database server is working
2.apex server down
3.we increased tablespaces
4.checked locked account also.
every thing fine .
but we cannot able to access server we are receving message
unable to found server
tomcat is not running .
can you please help us to run tomcat .
regards
r

I'm assuming that whoever installed the Apex Listener installed it under the Apache Tomcat application server. This isn't officially supported by Oracle, but it does work. You start Tomcat by executing "startup.bat" in its bin directory on Windows or "startup.sh" on Linux or other Unix-like OSes. In Windows, it will keep running as long as the command window is open (but you can minimize it) or I believe there is a way to set it up as a service - I'm not a Windows guru. In *nix, you can add an ampersand to the command to keep it running in background, or set it up to run as a daemon.
Altogether, you probably need someone to learn more about how to run Tomcat if the person who set it up for you is no longer available. There is plenty of information on-line - just use Google or Bing.

Calendar utilities report that Calendar server is not running

Hi All,
When i try to use calendar server utilities e.g. uniwho, unistat, unicpoutu etc, I always get server is down or server is not running but while using other utilities e.g. uniical, uniuser, uniping works fine.
I have started/stopped server many times using unistart/unistop but result is same. Web portal and windows client works fine.
Can anybody guess, what can be the problem? Why some utilities can work and some can't?
Thanks and Regards

On other side opmnctl status shows that everything is alive ...
Processes in Instance: ocsapps.qalotus1.in.zimbra.com
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
HTTP_Server | HTTP_Server | 3192 | Alive
DSA | DSA | 3176 | Alive
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | N/A | Down
WebCache | WebCache | 4668 | Alive
WebCache | WebCacheAdmin | 3076 | Alive
OC4J | OC4J_OCSClient | 3708 | Alive
OC4J | OC4J_Mail | 3304 | Alive
email | email_housekeeper | 3560 | Alive
email | email_imap | 4792 | Alive
email | email_listserver | 4832 | Alive
email | email_nntp_in | 5496 | Alive
email | email_nntp_out | 2800 | Alive
email | email_pop | 2284 | Alive
email | email_smtp_in | 5848 | Alive
email | email_smtp_out | 5756 | Alive
email | email_virus_scrub~ | 4844 | Alive
CalendarServer | Calendar_CSM | 3704 | Alive
CalendarServer | Calendar_CWS | 4404 | Alive
CalendarServer | Calendar_DAS | 3976 | Alive
CalendarServer | Calendar_SNC | 1480 | Alive
CalendarServer | Calendar_ENG | 4276 | Alive
CalendarServer | Calendar_LCK | 4516 | Alive
how can be so contradictory status information? Or its me only who cant interpret it in correct way?

TcpInitiator is not running - java.lang.IllegalStateException

This is the first time we have seen this exception on our Extend-client side in the past 6 months. What is the reason we are getting this? How can this be fixed? Do we need to do some autostart some where?
java.lang.IllegalStateException: XYZ-tcpProxy:TcpInitiator is not running
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.peer.Initiator.ensureConnection(Initiator.CDB:5)
     at com.tangosol.coherence.component.net.extend.remoteService.RemoteCacheService.openChannel(RemoteCacheService.CDB:5)
     at com.tangosol.coherence.component.net.extend.RemoteService.ensureChannel(RemoteService.CDB:6)
     at com.tangosol.coherence.component.net.extend.remoteService.RemoteCacheService.createRemoteNamedCache(RemoteCacheService.CDB:12)
     at com.tangosol.coherence.component.net.extend.remoteService.RemoteCacheService.ensureCache(RemoteCacheService.CDB:39)
     at com.tangosol.coherence.component.util.safeService.SafeCacheService.ensureCache$Router(SafeCacheService.CDB:1)
     at com.tangosol.coherence.component.util.safeService.SafeCacheService.ensureCache(SafeCacheService.CDB:46)
     at com.barcap.edt.flow.core.impl.cache.CoherenceCacheFactory$1.doTry(CoherenceCacheFactory.java:87)
     at com.barcap.edt.flow.core.impl.cache.CoherenceCacheFactory$1.doTry(CoherenceCacheFactory.java:1)
     at com.barcap.edt.flow.core.util.retry.RetryUtil.tryIt(RetryUtil.java:65)
     ... 2 more
Edited by: A.G. on Mar 10, 2010 5:55 PM

Dave,
Thanks for looking at the issue we encountered. Our Extend client config is as follows. Unfortunately I do not have the full log from the extend client vm as in this case extend client runs on our client's desktop.
<?xml version='1.0'?>
<cache-config>
<caching-scheme-mapping>
<cache-mapping>
<cache-name>xyz</cache-name>
<scheme-name>xyz-tcpProxy</scheme-name>
</cache-mapping>
</caching-scheme-mapping>
<caching-schemes>
<remote-cache-scheme>
<scheme-name>xyz-tcpProxy</scheme-name>
<service-name>xyz-tcpProxy</service-name>
<initiator-config>
<tcp-initiator>
<remote-addresses>
<socket-address>
<address>proxy-host-address-01</address>
<port>22001</port>
</socket-address>
<socket-address>
<address>proxy-host-address-nn</address>
<port>22001</port>
</socket-address>
<connect-timeout>10000</connect-timeout>
</remote-addresses>
</tcp-initiator>
<outgoing-message-handler>
<request-timeout>30000</request-timeout>
</outgoing-message-handler>
</initiator-config>
</remote-cache-scheme>
<remote-invocation-scheme>
<scheme-name>xyz-remoteInvocation</scheme-name>
<service-name>xyz-remoteInvocation</service-name>
<initiator-config>
<tcp-initiator>
<remote-addresses>
<socket-address>
<address>proxy-host-address-01</address>
<port>22001</port>
</socket-address>
<socket-address>
<address>proxy-host-address-nn</address>
<port>22001</port>
</socket-address>
<connect-timeout>10000</connect-timeout>
</remote-addresses>
</tcp-initiator>
<outgoing-message-handler>
<request-timeout>30000</request-timeout>
</outgoing-message-handler>
</initiator-config>
</remote-invocation-scheme>
</caching-schemes>
</cache-config>
Regards
/A.G.

Daemon not running

Similar Messages

Maybe you are looking for