Daily edition (prs 900) touchscreen problem

Does anyone know what to do about this problem?
The touchscreen on my prs 900 daily edition has stopped working. It just doesn't respond. You touch or tap or swipe and nothing happens - no response. I cant use any screen icons that depend on the touchscreen.
Is there a firmware update or any other solution anyone knows of? Anything I can try?

Are you saying ONLY the touchscreen doesnt respond? So the hardware buttons are still working?
I suggest try a soft reset (push the reset button on bottom edge), if this doesnt resolve, try a factory reset (be aware, all data will be erased), using the reset button plus sliding the power button. Instruction for further steps are on the screen.
If that doesnt resolve the problem, service may be required.
sonymod_cb

Similar Messages

Daily Edition 950 - Image Zoom Could be Better

Daily Edition 950 - Zoom Could be Better
One of the best uses I can think of for the daily edition is to function as a navigation device on which to store maps.
I am pleased with my daily edition 950, but I have tested the zoom capabilities of images and they could be better.
It appears that the zoom amount is based on a predetermined variable (it looks like a maximum of 200% of the initial screen image size). It would be better if zoom amount was based on the size of the image rather than the arbitrary screen size. Since it is not, image resolution and image size do not matter at all which ends up limiting users to low resolution images.
Please include a map function or better zoom controls in the next software update!

it is a problem i am worry too. c# image zoomer shouldnot lower image quality or it will be absolutely absurb for us. thank you for paying attention to the situation.

Acrobat Pro 6 Average Daily Production and Math.round problem

Acrobat Pro 6 Average Daily Production and Math.round problem
(Production.0) (154) (whole units) . (Production.1) (90) (fractional) / (divided by) 31 (days) results in (Average.0) (4)(whole units) . (Average.1) (10) (fractional) using :Math.round.� Noticed that 154 (whole units) . 85 through 99 (fractional) also show 4.10. (without Math.round : 5.00)
Method:
�Production.0� (whole units) . �Production .1� (fractional) / Days = (Average Daily Production) (�Average.0� (whole units) . (Average.1) (fractional)
� Production.0 (value not calculated)�, � Production 1 (calculated) (event.value = util.printx("0099", (event.value)).substr(-2,2); � �Average.0 (value not calculate)�, and �Average.1 has following calculation:
var punits = this.getField("Production.0");
var pfrac = this.getField("Production.1");
var average = 0.0;
average = (punits.value + pfrac.value / 100) / this.getField("Days").value;
this.getField("Average.0").value = average - average % 1;
this.getField("Average.1").value = util.printx("0099", Math.round((average % 1 * 100))).substr(-2,2);
�Math.round� appears to be a problem. Also, could you explain the purpose of �0099� . Anyway, why would 154.85 through 154.90 divided by 31 give 4,10. Also, their must be a better way, to find the average daily production. All you have to do is divided the production (whole. fractional) by the days, and display the average daily production as (whole. fractional). Any suggestions??

There are a many loose ends in your question.
First, I have never seen before a variable type called 'var'. Is it a java primitive or a class?
Next, I cannot seem to find any class that has the printx method.
When it comes to substr(-2,2), I get confused. First, I thought that it was a method of the String class, but I only got as far as substring(beginIndex, endIndex).
If you really must break the production and average into pieces, try this:
float average = (punits + pfrac/100) / days;
int avg_units = (int)average;
int avg_frac = (int)( (average - avg_units) * 100 );My guess is that util.printx("0099", x) formats x having two optional digits and two mandatory digits, showing 0-99 as 00-99, but allows to show numbers with three and four digits.
154.85/31 = 4,9951612903225806451612903225806
154.99/31= 4,9996774193548387096774193548387
If you round the fraction of theese numbers multiplied by 100 ( = 99.51.. and 99.968...) you get 100, and this will be the output of printx. My guess for "4.10" is that substr(-2,2) returns the two first characters of the string, because the start index should not be zero. (According to java docs, substring throws an exception on a negative index, so what kind of class are you really using ??????)

Touchpad touchscreen problems (erratic behavior/not responding correctly/etc) temporary solution.

I bought a HP Touchpad about a month or two after it came out. It worked pretty much as you'd expect it to until some time ago. I started getting a problem where the screen would go crazy and not respond correctly to my touch inputs. Web pages would jump all over the place, cards would zoom out, etc, in other words, they would behave erratically. After some testing I noticed that certain areas of the touchscreen would NOT respond at all to inputs while others would make the screen go crazy like I mentioned previously. I looked for information on the web to see if other people where having the same problem and found reports of the same behavior. Unfortunately there where no solutions offered. At that point I tried turning on and off the Touchpad which did not resolve the problem. My next step was to try to reinstall the OS with WebOS Doctor, but I read a post where the user reported similar behavior and reinstalling with WebOS Doctor didn't fix the problem. Needless to say I was bummed out since I figured it was a hardware problem with the touchscreen. After more testing I found a temporary solution to the problem which seems to suggest that the probem could be software. The solution when you get the problem is to hold down the power button and the home button at the same time and keep them pressed until the screen shuts down and the touchpad restarts. Once the OS comes back up it works like it is supposed to until you get the next episode of screen epilepsy. At that point you need to do the procedure again and it will fix the problem temporarily. Usually the fix lasts for a few days in my case. The fix also solves other problems I have with the touchpad. Problems like, videos not playing fluidly or freezing every few seconds although the sound plays fine (youtube), sound gets messed up (sounds are played in a robot like pitch), and others. If anybody has questions or other suggestions let me know, I will answer the as best as I can.
Post relates to: HP TouchPad (WiFi)

I think the YouTube and sound problems are separate from the other erratic behaviour. Recently my touchpad won't play YouTube videos beyond certain points, starting a few seconds in possibly due to the advertising pop-ups - I can skip forwards, but that means I miss crucial parts. My sound also goes 'robot-like' until a reboot, which is incredibly annoying! Your touchscreen problems may be specific to your device - try going to Device Info / Diagnostics and see if that tells you anything.

Hello MacHeads: I downloaded Handbrake 0.9.1 for Tiger, so I can upload a homemade DVD for editing in imovie. Problem is I can't even access Handbrake Help book, because I think my firewall settings are preventing me. I tried turning off all my firewall

Hello MacHeads: I downloaded Handbrake 0.9.1 for Tiger, so I can upload a homemade DVD for editing in imovie. Problem is I can't even access Handbrake Help book, because I think my firewall settings are preventing me. I tried turning off all my firewall settings.? IDK if I'm even doing that right. Can anyone help out here?

You don't need Handbrake for that if it is your own DVD.
You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle.
a DVD is in a compresed format called mpeg2, which is standard across all DVDs. This is what is known as a 'final delivery format' and is not suitable for editing. Because is is compressed, a 4.7GB DVD can hold a two hour movie (dual layer DVDs twice that), whereas the DV stream from a video camera, which runs at about 13GB per hour, is not compressed and IS intended for editing.
In other words you have to 'reverse engineer' the DVD back to an uncompressed format in ordfer to edit it. There is a penalty for doing this in terms of slight quality loss, but it is one you can live with.
When you have your DVD as an icon on your desktop, double-click it, and it will open to reveal a TS-Folder containing a number of various files, some called VOB. These are the constituent parts of any video DVD.
When you have downloaded and installed mpegStreamclip, and purchased and installed the Apple mpeg2 plugin, open mpegStreamclip and drag the entire TS Folder into its window. Then using the various menus available to you (just explore them and you will get the hang of it) ask it to convert to DV.
That DV file, which will be many times larger than the original TS Folder, and which can a while to create (be patient - make coffee or prune the roses!) is what you can now import into iMovie for editing etc.
When you have finished doing that, you then have to turn the project back into a DVD.
mpegStreamclip can be downloaded from here:
http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
which is free, but you must also have the Apple mpeg2 plugin :
http://www.apple.com/quicktime/mpeg2/
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.

TouchSmart IQ506 Touchscreen Problems

Our company recently got a TouchSmart IQ506 with Windows Vista 64bit, and everything was working fine. We did a fresh reformat, got it in the network and ran all the updates and such. As you may, or may not, know, the IQ506 doesn't have a VGA port to setup a second monitor or connect to a projector, so in order to use the TouchSmart mirroring an image to the projector we purchased StarTech's USB 2.0 to VGA Display Adapter. I installed the drivers and got it working and mirroring the image properly, however, now I am having a problem with the touchscreen.
The touchscreen is responding when I touch it, but the pointer is flushed all the way to the right. The mouse follows my stylus up and down with me, but it doesn't come to the left. It is as if the screen is only reading the y-coordinates of where I am touching, and the x-coordinates are stuck all the way to the right.
The touchscreen was working perfectly fine before I installed the graphics card driver, and the software to get the VGA display adapter to work. The mouse and keyboard is working fine, everything is perfect except for this touchscreen problem. I am 99% sure it is a software issue, and I wanted to know if there is a known issue, or if anyone else has had this kind of problem. I'm assuming it is the software for the VGA display adapter, and was wondering if that is the case, what alternatives I can make so the TouchSmart can support a second display without having touchscreen, or any other, problems.
Sorry in advance if there is already a topic on this issue, I went thorugh the forums and didn't find anything about this.
This question was solved.
View Solution.

It sound like the calibration screen and the touch "focus" has been shifted to the "primary" display - which is the last added display adapter. I don't have the setup to test, but you might be able to fix by selecting the Touch panel as the primary display (maybe). You may be stuck because the USB adapter will always be enumerated as the last device.
Perhaps...
1) Plug in USB adapter to enable display.
2) Go into display options and select Touchscreen as Primary and make sure "extend desktop" is unchecked.
You may also be able to trick the system by going into DM and removing reinstalling the real primary display adapter.
If all fails, you should be able to unplug the USB device and use MS system restore to go back when it was working properly.
Of course, I am saying all this without having the hardware in front ofme. I've played around with mutiple displays enough to know that you get into some funny behaviour when you have two distinct video adapters installed in the system. The best multi-display solution are those driven from one adapter - one video card with an HDMI and a DVI for example.
If you figure this out, please reply back. I'd like to know if it is possible to keep touch while using another adapter.
... an HP employee expressing his own opinion.
Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

XPERIA Z1 touchscreen problems while getting hot

Hi guys, I'm the owner of the Xperia Z1 for 2 months, and if I play demanding games, phone is getting hot, I know it's normal, BUT, when the phone is really hot, touchscreen have some problems, when I drawing lines, something interrupts my drawing, and when I'm moving in games which need to hold the thumb on screen, sometimes it interrupts too, I read a lot of forums about Z1 touchscreen problem, but i dunno it is software problem or hardware O.o plz help.

one of my friends , today has bought a brand new xperia z1, tho i warned him, and he ignored me saying that mine was defective, and guess what, KA booom
it has the same problem as my unit hahaha, you guys should've seen his face
still the sony guys won't reply to me cause they know the problem and still shy about it, we wen't back to the sony shop, they told us that many users who have z1 compact and z ultra are coming for the same fault,
do you guys think it's a driver problem related to the snapdragon 800 ?
come on guys let this thread alive again, if you make it die, sony will live you with a defective phone as long as you still own one of their dragon 800 device.
this is very sad, as i find the xperia z1 much snappier than xperia z2 and z3

Touchscreen Probleme

Hallo liebe Apple Community,
vor einigen Tagen war ich mal wieder mit meinem iPod Touch 3g joggen, als es auf einmal zu regnen anfing.
Daraufhin schaltete ich den iPod aus um mögliche Schäden zu vermeiden. Als ich wieder zu Hause ankam konnte ich den iPod nicht mehr anschalten, also ließ ich ihn einige Tage lang einfach liegen. Danach ging er auch wieder bis auf einen kleinen Wackelkontakt des Standby-Schalters einwandfrei.
Ein paar Tage danach fing er dann immer wieder an, abzustürzen, also schloss ich ihn an meinen PC an und als dieser meldete er könne die Daten des iPods nicht lesen, stellte ich diesen wieder her.
Danach verweigerte der Touchscreen leider komplett den Dienst, was er vor der Wiederherstellung noch nie getan hatte.
Ich führte also eine erneute Wiederherstellung durch und probierte auch ein Hard-Reset - kein Erfolg.
Mittlerweile funktioniert der Touchscreen immer mal wieder kurz und dann auch wieder nicht mehr und ich muss ihn dann erneut 2-3 Male wiederherstellen bis der Touchscreen dann wieder für ein paar Minuten funktioniert.
Was glaubt ihr? Handelt es sich um einen Hardware Fehler? Oder kann es an der Software liegen? Und wie komme ich zu einer Lösung des Problems?
Über alle konstruktiven Antworten würde ich mich sehr freuen!

Also ich habe jetzt meine iPod 2 Tage lang in einer Schüssel voller Reis gelassen. Danach ging er erst mal gar nicht an. Als ich ihn dann ein paar Stunden ladend liegengelassen habe ging er dann auch wieder an allerdings besteht das Touchscreen Problem nach wie vor. Ich habe auch schon mehrmals eine Wiederherstellung probiert.
Der Anleitung kann ich leider nicht folgen, da ich meinen iPod nicht entriegelt bekomme und ich somit auch nicht an die Einstellungen herankomme.
Allerdings sind nach wie vor die Wassersensoren nicht aktiviert.
Was soll ich tun?

Lumia 900 digitizer problem

I have a lumia 900, I bought it like a month ago while still having wp7.5 installed, now I have like 2 weeks since I update it to wp7.8, so the problem relies with the touchscreen, because I didn't notice it before but since I have wp7.8 while I am using the phone with the screen turned on for a while, like watching movies or web browsing it gaming, the screen starts to detect random touch inputs, just like if i were touching repeatedly, but I'm not. So I was wondering if someone have the same issue because I doesn't happens always, is kind of erratic... Could it be hardware or software problem???

If you use the phone with headphones attached does the problem stop?
If so they your phone has a hardware issue that occurs when loud sounds are played through the loudspeaker. You should take it to the retailer or a Nokia care point.
www.nokia.com/repair

Edit box length size problem...at Detail Section.

hi.
Plz have a look on below image.
This is my problem.
in details section i put one edit box... like below..
the data is comming from data base..
Header 1
but the size of the filed is more than the size of the Edit box..
i all ready checked can grow option in format field common properties.
but horizontal line is not adjusting ....
what should i do...

Hi Srini,
You can't place another object directly below an object that 'grows'.
Create another section and move the line to this new section.
-Abhilash

I can't edit song information the problem is not in all the items

I can't edit the information of my songs like gnre, artist, etc... when I start to use itunes I had another computer, when I change of computer I decide to copy my library to a external hard disk, I don't know if this is creating the problem, will be great to receive help.

Right-click on your main iTunes folder and click Properties, then go to the Security tab and click Advanced. If necessary grant your account and SYSTEM full control of this folder, subfolders and files, then tick the option to replace permissions on child objects which will repair permissions throughout the library. This is the XP dialog but Windows Vista/7 shouldn't be too different.
If it won't let you change the permissions use the Owner tab to take ownership from an account with administrator privileges.
tt2

Oracle 10g Express Edition Beta 3 Install Problems

I made three install attempts for this software, and I'll detail them below.
This was a fresh install on a computer that previously had no other version running
ATTEMPT 1
The installation procedure ran, but even though the OracleServiceXE service started, the server wouldn't work and I couldn't connect to it.
c:\oraclexe\app\oracle\product\10.2.0\server\config\log\postDBCreation.log contained the following...
SQL> connect "SYS"/"&&sysPassword" as SYSDBA
ERROR:
ORA-01017: invalid username/password; logon denied
SQL> set echo on
SQL> //create or replace directory DB_BACKUPS as 'D:\utils\oraclexe\app\oracle\flash_recovery_area';
SP2-0640: Not connected
SQL> begin
2 dbms_xdb.sethttpport('8080');
3 dbms_xdb.setftpport('0');
4 end;
5 /
SP2-0640: Not connected
SQL> create spfile='D:\utils\oraclexe\app\oracle\product\10.2.0\server\dbs/spfileXE.ora' FROM pfile='D:\utils\oraclexe\app\oracle\product\10.2.0\server\config\scripts\init.ora';
SP2-0640: Not connected
SQL> shutdown immediate;
ORA-01012: not logged on
SQL> connect "SYS"/"&&sysPassword" as SYSDBA
ERROR:
ORA-01017: invalid username/password; logon denied
I proceeded to uninstall and then reinstall in attempt 2.
ATTEMPT 2
This time, the installation procedure ran but didn't finish. It got up to the point where it said "Creating and starting services for Oracle Database 10g Express Edition..." and it sat there for a long time doing nothing, but there was a process "IDriver.exe" using a large percentage of the CPU all that while.
I ended up having to kill the installation process with the task manager to stop it, and then since the installation wasn't successful had to manually delete everything in c:\oraclexe
ATTEMPT 3
This time the installation went a lot better and after the install, everything in c:\oraclexe\app\oracle\product\10.2.0\server\config\log\postDBCreation.log looks normal.
I am able to connect to the database with sqlplus now, but the OracleXETNSListener process won't start.
When starting, it says this, but the OracleXETNSListener doesn't stay running:
C:\oraclexe\app\oracle\product\10.2.0\server\BIN>net start OracleXETNSListener
The OracleXETNSListener service was started successfully.
C:\oraclexe\app\oracle\product\10.2.0\server\BIN>net start OracleServiceXE
The OracleServiceXE service is starting.
The OracleServiceXE service was started successfully.
If I start the service in the windows services application it says "The OracleXETNSListener service on Local Computer started and then stopped..."
However, if I explicitly run c:\oraclexe\app\oracle\product\10.2.0\server\bin\tnslsnr.exe from the commandline, it works.
Why won't it start as a service?

Hello
I have the same problem.
My config :
- XP SP 2
Other installed products :
- last version Oracle JDevelopper
- Oracle Client 9.2.0 (the service does not run)
By the way,
JDev needs ORACLE_HOME set (c:\oracle for me).
Should Oracle XE be installed in %ORACLE_HOME% too or in an new empty folder (like c:\oraclexe) as it is recommended by the installer
I checked if I already use the port 1521 using netstat /ab but it seems this port is not used.
On a second PC, it works well.
How can I access the DB on my secondary PC from jdev on my priomary PC?
--> how can I only install OracleXE client on my primary PC?
Rgds
Guillaume

Need to revert to previous non-icloud ical -- new Delete button in Edit window is a problem.

Does anyone know how to revert to a previous version of iCal?
The new 5.0.3 iCal update is giving me huge problems.
When editing events, sometimes a delete button appears in the bottom right corner of the Edit window. Reflexivly, I click the small button, which I don't realize until it's too late, had changed to a 'delete' button. The new event is gone; there is no undo available.
I lost several appointments until I realized what was happening. I have lost new appointment with all the details I'd entered since.
Realize that this is just an opinion, but it is unfathomable why the UI change after all this time. There seems to be no good reason for having a delete button sometimes appear on the edit window.
Another change that is driving me crazy is that the Edit window open and close shortcuts were both command-E. Now, the commands have changed.
Please help! This is driving me crazy. I use iCal dozens of times a day. The new changes are not making me happy.
Thanks.

Hi flamechaser,
Welcome to the HP Forums.
I see that you are having some issue's when attempting to scan to the computer.
I do have a few suggestions we can try in the attempt to troubleshoot this issue.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I have also located a document that deals with communication issues between the computer and printer. Please click on the following link for a Windows Error: 'No HP devices have been detected. HP Solution Center will now close.'
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Editable Regions and Templates -- Problem in IE

Hello,
I have a template that I use throughout my site. The template
includes
the Spry Menu Bar and three editable regions. The pages all
look great
in Firefox. But in IE6 and IE7, there is a problem--white
space
vanishes and the text is too close to the objects above it.
Specifically, The <h3>Page
Title</h3>appears to close underneath
<td>. It's fine in
Firefox, however.
Any help is greatly appreciated.
Thank you,
=====================
Here's the code.
<style type="text/css">

</style>
</head>
<body text="#333333"
vlink="#333333" alink="#333333"
leftmargin="0"
topmargin="0"
marginwidth="0"
marginheight="0">
<TABLE width="800" border=0
align="center" cellpadding=0 cellspacing=0
bgcolor="#FFFFFF">
<TBODY>
<tr>
<td
width="2%">&nbsp;</td>
<td width="96%"><img
src="../SpryAssets/mainnav_logo.jpg"
/></td>
<td
width="2%">&nbsp;</td>
</tr>
<tr>
<td>&nbsp;</td>
<td>
<h3>Page Title</h3>
</td>

TEST BED:
I shrinked my test site to just 1 photo page with only 3 pictures and I I published it to a folder:
Safari 3.1.1 has no problems
Mozilla Firefox 2.0.0.2 has no problems
Opera 9.5 has no problems
IE 7.0.5730.13 cannot render any picture !!!!
DEEP DIVE:
IE fails and if "notifications" are turned on complains about run time error "Error: Access Denied" on line 504 of a script. I went deeper and using the Microsoft Just in Time Debugging features apparently the offending javascript is "iWeb - iWebSite.js" with an ajaxRequest called "req.open('GET',url,true)"
iWEB on LEOPARD is no better
I booted with an external disk using Leopard and I used iWeb just 1 photos page
no way IE still complains (so far I am using Mac Tiger level)
HOW CAN YOU HELP
To those of you who succeeded with iWeb+IE (and have time to lend) I can send the zipped 2MB actual iWeb "package" named "Domain.site2" used by my iWeb to save the site under editing before any publishing.
you temporarily rename your "Domain.site2" + substitute it with my "Domain.site2" + start iWeb and see if you can publish/see it correctly.
Please send me a private mail if you think you can help.
Seriously thinking of dumping iWeb...
RAN

Nokia Lumia 520 touchscreen problem HELP

So i got a Nokia 520 in June this year and ive had no problems with it but a few days ago when i switched it on the touchscreen and front buttons werent responding to touch. I removed the battery , soft reset and hard reset the phone and it's still not working. I cant take it to my local store till after Christmas and im lost without it, has anyone else had this problem and know what i can do to fix it?
I appreciate any help!

hi mate, nothing you can do here except to take your phone to Nokia Care for inspection as you have tried all avenues of troubleshooting on your own accord.

Daily edition (prs 900) touchscreen problem

Similar Messages

Maybe you are looking for