Daniel or anyone else, Help on why I can't access certain jsp pages

I have installed the Web Service Portlet Wizard to build my portlets. In particular,
I have created a URL porlet jsp which receives its content from a URL.
This URL that I retrive is an application that I have running on my Weblogic 6.1
Server. I can access the login page, and can logon and do a few things but for
some reason I Can't access certain pages. The pages I can't access are also jsp
pages on the wlserver6.1 server(exactly the same as other ones I can access and
interact with).
The error I receive on the Portal Front end is attached in a word doc. I have
also included in there, a snapshot of the access log for those pages, but I can't
really make out what it is telling me (if anything!).
For one of the pages, that I can't successfully access I get java.lang.ArrayIndexOutOfBoundsException
This only happens with 1 of the pages. But trying to access the same page withouth
going thru the portal I get NO errors what so ever.
Please if anyone can give me any information on why I can't access certain pages
via my portal It would be very helpful.
Finally I have included the code of my Portlet which accesses the URL. This is
also included in the word doc.
Thanks
Ramy
[Portal.doc]

Ramy,
I don't know the Web Service Portlet Wizard too well, but I notice that
login.htm never seems to be found (404 in logs). I would think that the two
warnings below your JSP call (cookies, and portlet state) are your most
likely culprits. If the Web Service Portlet Wizard does not handle cookies
then the portal server will have to continiously reauthenticate. I will
forward your email however and see if I can dig up a better diagnosis. Also,
could you post the stack trace for the ArrayIndexOutOfBoundsException you
are seeing.
Sincerely,
Daniel Selman
"Ramy" <[email protected]> wrote in message
news:[email protected]..
>
I have installed the Web Service Portlet Wizard to build my portlets. Inparticular,
I have created a URL porlet jsp which receives its content from a URL.
This URL that I retrive is an application that I have running on myWeblogic 6.1
Server. I can access the login page, and can logon and do a few things butfor
some reason I Can't access certain pages. The pages I can't access arealso jsp
pages on the wlserver6.1 server(exactly the same as other ones I canaccess and
interact with).
The error I receive on the Portal Front end is attached in a word doc. Ihave
also included in there, a snapshot of the access log for those pages, butI can't
really make out what it is telling me (if anything!).
For one of the pages, that I can't successfully access I getjava.lang.ArrayIndexOutOfBoundsException
This only happens with 1 of the pages. But trying to access the same pagewithouth
going thru the portal I get NO errors what so ever.
Please if anyone can give me any information on why I can't access certainpages
via my portal It would be very helpful.
Finally I have included the code of my Portlet which accesses the URL.This is
also included in the word doc.
Thanks
Ramy

Similar Messages

  • TS3798 I get this error message"your operation could not be completed" I need help figuring out why I can not access the web page.

    I get this error message"your operation could not be completed" I need help figuring out why I can not access the web page.

    amarilysfl wrote:
    "Your disk could not be partitioned. An error occurred while partitioning the disk".
    https://www.apple.com/support/bootcamp/
    If you were using Apple's BootCamp and received this message, quit it and open Disk Uility in your Applicaitons/Utilities folder.
    Select the Macintosh HD partition on the left and select Erase and Erase Free Space > Zero option and let it complete (important) this will check the spare space for bad sectors that can cause issues formatting partitions.
    Once it's completed, try creating a partiton again in BootCamp.
    If that doesn't work, then hold command option r keys down while connected to a fast internet connection, Internet Recovery should load (spinning globe) and then in that Disk Utility, select your entire internal drive and click > First Aid > Repair Disk and Permissions.
    reboot and attempt Bootcamp again.
    If you still get a error, it might be that you have OS X data on the bottom area where BootCamp partition needs to go. This would occur if you had the drive or computer for a long time or wrote a large amount of files to the drive and nearly filling it up and then reduced some, but it left traces in the area BootCamp needs to go.
    To fix this
    BootCamp: "This disc can not be partitioned/impossible to move files."
    How to safely defrag a Mac's hard drive

  • Hi all,,,, I am using apple ipod classic 80 GB... can anyone please tell me why i can't see my device on itunes once i connect it to my pc through usb cable???CAn anyone please help me out .... thanks

    hi all,,,, I am using apple ipod classic 80 GB... can anyone please tell me why i can't see my device on itunes once i connect it to my pc through usb cable???

    Hey wajahat86!
    Here is an article that describes this issue and can help you resolve it:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Take care, and thanks for visiting the Apple Support Communities.
    Cheers,
    Braden

  • "We are currently experiencing some issues, please try again later. If the problem persists, contact customer support" - is anyone else experiencing this and how can I resolve this issue?

    I've been trying to download the photoshop free trial for the past three days but instead of installing a message saying "We are currently experiencing some issues, please try again later. If the problem persists, contact customer support" - is anyone else experiencing this and how can I resolve this issue?

    try some steps such as changing browsers and turning off your firewall for downloads
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • I have a 2008 imac with snow leopard.  i installed update 10.9.3 not realizing it's best for Maverick's users.  Now my Itunes 11.2.2 won't burn playlists to CD.   Anyone else with this problem?  CAn I uninstall the 10.9.3 update?

    i have a 2008 imac with snow leopard.  i installed update 10.9.3 not realizing it's best for Maverick's users.  Now my Itunes 11.2.2 won't burn playlists to CD.   Anyone else with this problem?  CAn I uninstall the 10.9.3 update?  Also my HP scannerwill not save the displayed scanned document since this update!  it just saves gray.

    If you have your old system backed up then erase the drive and restore your backup. If you don't have a backup then backup your entire Home folder. Erase the drive and install Snow Leopard after which you can restore your Home folder from the backup.
    Clean Install of Snow Leopard
    Be sure to make a backup first because the following procedure will erase
    the drive and everything on it.
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. Be sure you configure your initial admin account with the exact same
             username and password that you used on your old drive. After you finish Setup
             Assistant will complete the installation after which you will be running a fresh
             install of OS X.  You can now begin the update process by opening Software
             Update and installing all recommended updates to bring your installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    Or you can:
    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
         computer and after the chime press and hold down the OPTION key until the boot manager
         screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
         Reinstall the 10.9.3 update: OS X Mavericks 10.9.3 Update (Combo).
    4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Reinstall the 10.9.3 update: OS X Mavericks 10.9.3 Update (Combo).

  • The 'Swipe to Camera app icon' function is not working.  I swipe across but the camera app doesn't start up at all.  Does anyone else have this problem?  Can it be fixed?

    The 'Swipe to Camera app icon' function is not working.  I swipe across but the camera app doesn't start up at all.  Does anyone else have this problem?  Can it be fixed?

    You don't swipe but actually press, hold and push up.

  • Hi All , Pls Help ! Why icloud can't upload photo to iPad on Win 7 64bit ?

    Hi All , Pls Help ! Why icloud can't upload photo to iPad on Win 7 64bit ?

    This computer has two different versions of Flash Player for Internet Explorer and two different versions of Flash Player for other browsers.
    A clean install is recommended: 
    Windows
    Download the current 32 bit uninstaller    Uninstaller for 32 bit Operating Systems
    Close all browser windows and run the uninstaller 
    Restart Windows 
    Delete all remaining files and folders located in the following directories. (tip: copy and paste these paths into the path bar in an Explorer window) 
    C:\Windows\System32\Macromed\Flas 
    %appdata%\Adobe\Flash Player 
    %appdata%\Macromedia\Flash Player
    Verify that the file “FlashPlayerCPLApp.cpl” in C:\Window\system32\ for 32 bit systems has been deleted.
    Download the following installer files:
    32 bit Flash Player for ActiveX (Internet Explorer)
    32 bit Flash Player Plug-in (All other browsers)
    Physically disconnect from the Internet and run the installers.

  • Hi, I have just purchased a new Macbook Pro. Whenever I try and buy anything on the internet (via Safari) on any website it will not allow me to add products to checkout. Has anyone else experienced this problem or can suggest a fix? Many thanks!

    Hi, I have just purchased a new Macbook Pro. Whenever I try and buy anything on the internet (via Safari) on any website it will not allow me to add products to checkout. Has anyone else experienced this problem or can suggest a fix? Many thanks!

    On all shopping sites, or only some? What happens when you try?

  • How to find out who your administrator is and why I can't view certain things even on this web sight business account is what I have

    How do I find out who my administrator is and why I can't view certain things and get error 401 says i am an unauthorized user
    It is a small business which doesn't make sense why I shouldn't be able to access certain pages  on the Internet
    I believe my husband is the administrator actually
    Plus 404 and 403

    If you are referencing a specific web site, there is no way to determine who is set up as administrator. Contact the web site directly.
    Barry
    P.S. As a note, you already received an answer to your "401" question. Please do not rephrase a question and post it again. We are volunteers here and do not like to answer something that has already been addressed.
    Message was edited by: Barry Hemphill

  • Why you can't access my order I need them to me and my wife as gift..?

    why you can't access my order I need them to me and my wife as gift..?
    plz
    <Personal Information Edited by Host>

    We are itunes users just like you.
    You are not addressing Apple here.

  • Any ideas as to why i can't access radio feature?

    any ideas as to why i can't access radio feature?  error message pops up

    Vielen dank, léonie! 
    3 comments for Apple:
    1.  "Choose" is not linguistically clear.  How about "save" or "update."  "Choose" would seem to me to be related to selecting the particular music one would want to play, not to saving the un-check.
    2.  This is not interface-consistant with the Settings window right next door, where just closing the window works fine.
    3.  This doesn't explain why a cloned older slideshow with the checkbox off still played music, but with the problem solved I don't care to rabbit-hole after that issue.

  • Why i can't access firefox

    why i can't access firefox

    please try and reset the browser setting because due to few setting and secure features few sites gets blocked.

  • How can i access my docs (pages) in my iCloud from my iPad? I do no have pages in my iPad? help please

    How can i access my docs (pages) in my iCloud from my iPad? I do no have pages in my iPad? help please

    Why would you want to access your Pages documents on the iPad if you don't have Pages?
    If you wanted to email them to someone, you could have done that on the Mac. If you want to edit them on the iPad you need the app on the iPad.

  • Why i can`t see the featured page of itunes store?

    why i can`t see the featured page of itunes store?

    What are you trying to do exactly and how are you trying to do it?  You want to view artwork for tracks that on your iPod in iTunes? Why would you want to do that when you can just do that from your main iTunes Music library?
    B-rock

  • HT1338 Why I can not access to yahoo games from my Mackbook Air?

    Why I can not access to yahoo games from my Mackbook Air?. I am using Mac OS X 10.7. 4.

    http://jdk7.java.net/download.html
    u10 fixes yahoo game problem.

Maybe you are looking for

  • Office 2013 partialy virtualized breaks Outlook2013

    Hi, We tryed to virtualize Access Visio and Project 2013 in one package using the Click to Run method. For this method we made a xml file with the following content: <Configuration>     <Add SourcePath="C:\Temp\Project\Download" OfficeClientEdition="

  • Previewing clips in Prelude while in other applications (e.g. browsing the net)?

    Prelude is a great tool for quickly going through media, but sometimes clips require you to watch or listen to the whole thing to find the right moments. I'd love to be able to have clips playing in the background while surfing the net. Is there a wa

  • Video's become unsynced with audio track

    I have downloaded a few videos and used the conversion utility in iTunes, but still find that on longer videos, the video track becomes unsynced to the voice track. Is there a remedy?

  • Needing to run Mountain Lion with Yosemite OS

    I'm needing to run Mountain Lion and I've got a new Retina 15" MBP that shipped with Yosemite. I've been told you cannot run it on a partition with Yosemite. What is the best way to go about doing this? I'm needing to have access to Pro Tools 10 as s

  • How to create Data Template for creation of BI Pulisher Report

    Hi, I m having all the steps for creation of BI Pulisher report using Data Template, like 1st create Data Template, Add new Data Definition, upload Data Template, Create Concurrent Program and run the request, save o/p and create rtf layout, upload T