Danish character and Symbol are not displaying in crystal report 2008

I am developing a crystal report. The report displays data from database. The data is entered into database from a asp.net web form where a JavaScript Editor is used. Mainly data is saved in Danish character and also there are some emotion symbol. The web page is showing these data reading from database perfectly. But the Crystal Report is missing some Danish character as well as emotion symbol in some cases. The screen print both for web page and crystal report is shown bellow. The database field DataType is “CLOB” and using Crystal Report 2008.
Can anyone help me to get rid of this situation.
Thanks to you all.

Please have a look at the resolution in this thread:
CR 2008 - Oracle 11g - CLOB fields are blank when using command
-Abhilash

Similar Messages

Reg: 0COUNTRY and 0REGION are not displaying in the report

Dear SDNERS,
I am facing a problem in CRM Report " 0CRM_C04_Q003" I am not able to get the 0COUNTRY & 0REGION data in the reports it is showing # Not Assigned.
When I check the 0REGION & 0COUNTRY it is having data in it in the info objects.
I come to know that both the objects are navigational attributes of "0CRM_PROSPE" info object in the report and this info object does not have any data in it as it is having a referece char of 0BPARTNER.
0BPARTNER is not showing the data for 0COUNTRY AND 0REGION. pleaes advice how to get this in CRM report.
Points will be assigned for a quick response.
Regards,
Prasad.

Hi,
0COUNTRY and 0REGION as you said are Nav Att of 0CRM_PROSPE Master data.
If Master data object itself is not having data then it would not be possible for you to get data for these objects.
You can include these two objects in your InfoProvider and add in your Query as normal InfoObjects instead of Nav att.
Note: The two Infoobjects should be mapped with the appropriate source fields in the transformation and data load should be successful.
Hope this would resolve your issue.
Regards,
Geeta

Japanese characters are not displayed properly - Crystal Report XI

Hello,
We are upgrading reports from CR8 to CR11.
When I preview the CR8 report I can see the Japanese Characters (Coming from Database).
After saving the CR8 report as CR11 report, When I preview the report I cannot see the Japanese Character which I was able to see in CR8.
Why I am seeing unknown characters in CR11? When CR8 displays Japanese, then CR11 should display right?
Please help.
Thanks in advance.

These are simply community forums - not technical support as such. You may, or may not get an answer. If you do need to contact technical support, you may want to consider obtaining a one case phone support contract from here;
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
Ludek

BEx hierarchies not displayed in Crystal report parameters

Hi All,
I am trying to using a Bex query that has a cost center hierarchy with a variable that allows users to select specific nodes or even cost centers. In BEx reports, this query works fine and gives the users the view of the cost centres in a hierarchial manner. However, in Crystal reports, the query provides a drop down menu displaying a simple list of all the cost centres (not in a hierarchial manner). This confuses the user as to which element is a node and which is a cost centre
Kindly suggest how can we achieve the cost centre hierarchy to appear in the parameters in Crystal.
Thanks

Hi,
this is a duplicate to this entry:
key figures are not displayed in crystal report
Please do not post the same problem multiple times
regards
Ingo Hilgefort

Enabled UDF's are not displaying in XL Report Composer.

Hi,
I Enabled User Defined Fields (UDF) under manage user defined fields. But itu2019s displaying only Light dimensionu2018s fields. But Dimension attributeu2019s fields are not displaying in XL Report composer. How we can display Dimension attribute fields in XL Report.
Regds,
Sampath Kumar.

Hi,Danie Posthumus
First of all we are not able to see my User define filed in report composer except for light dimensions type. Only we are getting Light Dimension Data Item type only we are not getting Dimension Attribute Data item type.
Regds,
Sampath Kumar Devunuri.

Nodes and links are not displaying in IE10 browser - mapviewer ps6

Hi,
Node and link are not visible on the IE10 browser where as in IE9 they are displaying properly.
In IE10 browser ,
when we set compatibility settings - Display All websites in compatibility view --> node are displaying properly.
when we deselect this node are not displaying properly
Is there any existing bug on mapviewer?
Thanks in Advance
Aruna

DRK Montreal,
try opening Terminal, and running the following command in the Terminal window:
nslookup www.pinatize.me
If you still have access to some of those other Mac computers, try running the same command on them also for comparison.
Please include in your reply the full output from that command.

Pictures and texts are not displayed properly

Hello Apple users,
I've the 15 inch Macbook Pro with retina display, running Mountain Lion. I have noticed that when I chat with my friends in Facebook, the texts in the chat window are not displayed properly. This also happens when flipping through photos that were uploaded in Facebook. Also, pictures are not displayed properly in other websites. For example, today I was reading the news in the Guardian when I noticed that the top bar and a picture weren't displayed properly. The top bar should have showed News, Sports, Comment, Culture, Pensions, etc. all in the same line. Also look at the photo titiled "Should building socities do buy-to-let?" I took a screenshot from the guardian and you can see the photo here: https://docs.google.com/file/d/0ByQ7VP0wjFM-U0ZIOXlwMm13Vnc/edit?usp=sharing
Do you guys have any suggestions how can I fix these issues?
Thanks for reading and your help

From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
If any extensions are installed, disable them and test.

Street and Country are not displaying on the Form

Hi all,
Does anyone know why the STREET and COUNTRY is not displayed on form?
I have debugged into SAPscript, the value for REGUH-STRAS and LV_REGIO is there, but somehow it just cannot display on the form.
/ &REGUH-NAME1&</></>
/ &REGUH-STRAS&</></></></>
/ &REGUH-ORT01&</></></></></></>
/ &REGUH-PSTLZ&</></></></></></></></>
/ &LV_REGIO&</></></></></></></></></></>
Please advice and thanks in advance.

Hello,
Use Condence symbol 'C' in the respective fields.
&REGUH-STRAS(C)& / &REGUH-ORT01& / &REGUH-PSTLZ& / &LV_REGIO(C)&
Regards,

Column Heading are not displayed in ALV Report using CL_SALV_DISPLAY?

Hi,
 I am using CL_SALV_DISPLAY class to display data. I Created an Internal Table Dynamically based fieldcatalog which was prepared based data at run time. When i displayed data using CL_SALC_DISPALY data is display in output but column headings are not displayed.
can anyone suggest me how to display heading in ALV using CL_SALV_DISPLAY class, My code is
 CLASS lcl_report DEFINITION
CLASS lcl_report DEFINITION.
PUBLIC SECTION.
 METHODS:
 display IMPORTING l_table TYPE string
 l_fcat TYPE string.
ENDCLASS. "lcl_report DEFINITION
 CLASS lcl_report IMPLEMENTATION
CLASS lcl_report IMPLEMENTATION.
METHOD display.
 DATA: gr_table TYPE REF TO cl_salv_table.
 DATA: gr_columns TYPE REF TO cl_salv_columns_table,
 gr_column TYPE REF TO cl_salv_column_table,
 ls_fcat TYPE slis_fieldcat_alv.
 DATA: gr_display TYPE REF TO cl_salv_display_settings.
 DATA: l_o_functions TYPE REF TO cl_salv_functions_list,
 l_field TYPE string.
 FIELD-SYMBOLS : <fs_table> TYPE STANDARD TABLE,
 <ft_fcat> TYPE STANDARD TABLE.
Get the ALV object refering to the output table
 ASSIGN (l_table) TO <fs_table>.
 ASSIGN (l_fcat) TO <ft_fcat>.
 TRY.
 cl_salv_table=>factory(
 IMPORTING
 r_salv_table = gr_table
 CHANGING
 t_table = <fs_table> ).
 CATCH cx_salv_msg. "#EC NO_HANDLER
 ENDTRY.
Add basic default functionality in the ALV report
Functions
 l_o_functions = gr_table->get_functions( ).
 l_o_functions->set_all( abap_true ).
 gr_columns = gr_table->get_columns( ).
 gr_columns->set_headers_visible( abap_true ).
Display the list
 gr_table->display( ).
ENDMETHOD. "extract
ENDCLASS. "lcl_report IMPLEMENTATION
*& start-of-selection declaration
START-OF-SELECTION.
PERFORM :
get store codes
 get_storecodes USING p_stfile
 CHANGING it_t001w,
fetching mard data
 read_mard_data,
preparing fieldcatalog for Final Data
 create_filedcat USING it_t001w
 it_site
 CHANGING it_fieldcat,
preparing structure & internal table for Final Data
 create_final_table_structure USING it_fieldcat,
prepare output data
 prepare_final_data.
*& end-of-selection declaration
END-OF-SELECTION.
PERFORM :
display data
 display_data USING l_table
 l_fcat.
*& Form get_storecodes
FORM get_storecodes USING p_p_stfile
 CHANGING p_it_t001w LIKE it_t001w[].
DATA :
internal table for RAW
lt_raw TYPE truxs_t_text_data,
rs_site LIKE LINE OF rt_site,
l_index LIKE sy-tabix.
FIELD-SYMBOLS :
field symbol for it_t001w
<fs_t001w> LIKE LINE OF p_it_t001w.
calling function module to get Stores Data from File
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
 EXPORTING
 i_line_header = 'X'
 i_tab_raw_data = lt_raw
 i_filename = p_p_stfile
 TABLES
 i_tab_converted_data = p_it_t001w[]
 EXCEPTIONS
 conversion_failed = 1
 OTHERS = 2.
IF sy-subrc <> 0.
 EXIT.
ENDIF.
SORT p_it_t001w BY werks.
CLEAR rs_site.
rs_site-sign = 'I'.
rs_site-option = 'EQ'.
rs_site-low = p_dccode.
APPEND rs_site TO rt_site.
IF it_t001w[] IS NOT INITIAL.
 LOOP AT p_it_t001w ASSIGNING <fs_t001w>.
 l_index = sy-tabix.
 CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
 EXPORTING
 input = <fs_t001w>-werks
 IMPORTING
 output = <fs_t001w>-werks.
 MODIFY p_it_t001w FROM <fs_t001w> INDEX l_index.
 IF <fs_t001w>-werks GE s_site-low AND <fs_t001w>-werks LE s_site-high.
 append site to ranges
 CLEAR rs_site.
 rs_site-sign = 'I'.
 rs_site-option = 'EQ'.
 rs_site-low = <fs_t001w>-werks.
 APPEND rs_site TO rt_site.
 CONTINUE.
 ENDIF.
 ENDLOOP.
 SORT p_it_t001w BY werks.
 SORT rt_site.
ENDIF.
ENDFORM. " get_storecodes
*& Form create_final_table_structure
FORM create_filedcat USING p_it_t001w LIKE it_t001w[]
 p_it_site LIKE it_site[]
 CHANGING p_it_fieldcat LIKE it_fieldcat[].
FIELD-SYMBOLS :
field symbol for p_it_t001w
<fs_t001w> LIKE LINE OF p_it_t001w,
field symbol for p_it_site
<fs_site> LIKE LINE OF p_it_site.
DATA :
fieldname
l_fieldname TYPE slis_fieldname,
workarea for site ranges
rs_site LIKE LINE OF rt_site.
CLEAR : l_fieldname, rs_site.
l_fieldname = p_dccode.
PERFORM
prepare fieldcatalog
build_fieldcatalog USING : 'MTART' 'CHAR' '5' ,
 'MTBEZ' 'CHAR' '25' ,
 'MATKL' 'CHAR' '6' ,
 'WGBEZ' 'CHAR' '20' ,
 'MATNR' 'CHAR' '18' ,
 'MAKTX' 'CHAR' '30' ,
 l_fieldname 'CHAR' '17' .
create header for excel
PERFORM create_excel_header USING : 'Division',
 'Divsion Description',
 'MC Code',
 'MC Description',
 'Article',
 'Article Description',
 l_fieldname.
loop for creating fieldcatalog
LOOP AT it_site ASSIGNING <fs_site>.
 READ TABLE it_t001w ASSIGNING <fs_t001w> WITH KEY werks = <fs_site>-werks
 BINARY SEARCH.
 IF sy-subrc = 0 AND <fs_t001w> IS ASSIGNED AND
 <fs_site> IS ASSIGNED AND <fs_site>-stock GT 0.
 CLEAR : l_fieldname, rs_site.
 l_fieldname = <fs_site>-werks.
 prepare fieldcatalog
 PERFORM build_fieldcatalog USING : l_fieldname 'CHAR' '17'.
 create header for excel
 PERFORM create_excel_header USING l_fieldname .
 CONTINUE.
 ENDIF.
ENDLOOP.
l_fcat = 'it_fieldcat[]'.
ENDFORM. " create_final_table_structure
*& Form build_fieldcatalog
FORM build_fieldcatalog USING p_fieldname TYPE slis_fieldname
 p_datatype TYPE datatype_d
 p_length TYPE intlen.
DATA : ls_fieldcat LIKE LINE OF it_fieldcat.
CLEAR : ls_fieldcat.
ls_fieldcat-fieldname = p_fieldname.
ls_fieldcat-datatype = p_datatype.
ls_fieldcat-intlen = p_length.
APPEND ls_fieldcat TO it_fieldcat.
ENDFORM. " build_fieldcatalog
*& Form create_final_table_structure
FORM create_final_table_structure USING p_it_fieldcat.
Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
 EXPORTING
 it_fieldcatalog = it_fieldcat
 IMPORTING
 ep_table = t_table.
ASSIGN t_table->* TO <ft_final>.
ENDFORM. " create_final_table_structure
*& Form create_excel_header
FORM create_excel_header USING p_p_fieldname.
DATA : ls_header LIKE LINE OF it_header.
CLEAR ls_header.
ls_header-col_name = p_p_fieldname.
APPEND ls_header TO it_header.
ENDFORM. " create_excel_header
*& Form prepare_final_data
FORM prepare_final_data .
DATA : l_matnr LIKE g_matnr,
 l_werks LIKE g_werks,
 l_index LIKE sy-tabix.
FIELD-SYMBOLS : <fs_mard> LIKE LINE OF it_mard.
Getting No. of Lines in IT_MARD internal table
DESCRIBE TABLE it_mard LINES g_lines.
LOOP AT it_mard ASSIGNING <fs_mard>.
 l_index = sy-tabix.
 IF l_matnr IS INITIAL.
 l_matnr = <fs_mard>-matnr.
 CLEAR : l_werks.
 l_werks = <fs_mard>-werks.
 UNASSIGN : <fs_value>, <fs_final>.
 Create dynamic work area and assign to FS
 CREATE DATA t_line LIKE LINE OF <ft_final>.
 ASSIGN t_line->* TO <fs_final>.
 ASSIGN COMPONENT 'MATNR' OF STRUCTURE <fs_final> TO <fs_value>.
 <fs_value> = <fs_mard>-matnr.
 ASSIGN COMPONENT l_werks OF STRUCTURE <fs_final> TO <fs_value>.
 <fs_value> = <fs_value> + <fs_mard>-labst.
 getting Article Type,MC & its Descriptions
 PERFORM get_other_data USING l_matnr
 l_werks.
 ELSEIF l_matnr <> <fs_mard>-matnr.
 APPEND <fs_final> TO <ft_final>.
 CLEAR l_matnr.
 l_matnr = <fs_mard>-matnr.
 CLEAR : l_werks.
 l_werks = <fs_mard>-werks.
 UNASSIGN : <fs_value>, <fs_final>.
 Create dynamic work area and assign to FS
 CREATE DATA t_line LIKE LINE OF <ft_final>.
 ASSIGN t_line->* TO <fs_final>.
 ASSIGN COMPONENT 'MATNR' OF STRUCTURE <fs_final> TO <fs_value>.
 <fs_value> = <fs_mard>-matnr.
 ASSIGN COMPONENT l_werks OF STRUCTURE <fs_final> TO <fs_value>.
 <fs_value> = <fs_value> + <fs_mard>-labst.
 getting Article Type,MC & its Descriptions
 PERFORM get_other_data USING l_matnr
 l_werks.
 ELSE.
 CLEAR : l_werks.
 l_werks = <fs_mard>-werks.
 ASSIGN COMPONENT l_werks OF STRUCTURE <fs_final> TO <fs_value>.
 <fs_value> = <fs_value> + <fs_mard>-labst.
 ENDIF.
 IF l_index = g_lines.
 APPEND <fs_final> TO <ft_final>.
 ENDIF.
ENDLOOP.
l_table = '<ft_final>[]'.
ENDFORM. " prepare_final_data
*& Form get_other_data
FORM get_other_data USING p_l_matnr
 p_l_werks.
FIELD-SYMBOLS : <fs_mara> LIKE LINE OF it_mara,
 <fs_t023t> LIKE LINE OF it_t023t,
 <fs_t134t> LIKE LINE OF it_t134t,
 <fs_makt> LIKE LINE OF it_makt.
READ TABLE it_mara ASSIGNING <fs_mara> WITH KEY matnr = p_l_matnr. " BINARY SEARCH.
IF sy-subrc = 0 AND <fs_mara> IS ASSIGNED.
 ASSIGN COMPONENT 'MTART' OF STRUCTURE <fs_final> TO <fs_value>.
 <fs_value> = <fs_mara>-mtart.
 ASSIGN COMPONENT 'MATKL' OF STRUCTURE <fs_final> TO <fs_value>.
 <fs_value> = <fs_mara>-matkl.
 READ TABLE it_makt ASSIGNING <fs_makt> WITH KEY matnr = <fs_mara>-matnr BINARY SEARCH.
 IF sy-subrc = 0 AND <fs_makt> IS ASSIGNED.
 ASSIGN COMPONENT 'MAKTX' OF STRUCTURE <fs_final> TO <fs_value>.
 <fs_value> = <fs_makt>-maktx.
 ENDIF.
 READ TABLE it_t023t ASSIGNING <fs_t023t> WITH KEY matkl = <fs_mara>-matkl BINARY SEARCH.
 IF sy-subrc = 0 AND <fs_t023t> IS ASSIGNED.
 ASSIGN COMPONENT 'WGBEZ' OF STRUCTURE <fs_final> TO <fs_value>.
 <fs_value> = <fs_t023t>-wgbez.
 ENDIF.
 READ TABLE it_t134t ASSIGNING <fs_t134t> WITH KEY mtart = <fs_mara>-mtart BINARY SEARCH.
 IF sy-subrc = 0 AND <fs_t134t> IS ASSIGNED.
 ASSIGN COMPONENT 'MTBEZ' OF STRUCTURE <fs_final> TO <fs_value>.
 <fs_value> = <fs_t134t>-mtbez.
 ENDIF.
ENDIF.
ENDFORM. " get_other_data
*& Form display_data
 text
FORM display_data USING p_l_table
 p_l_fcat.
DATA:
Variable for Object Creation
o_report TYPE REF TO lcl_report.
CREATE OBJECT o_report.
o_report->display( EXPORTING l_table = p_l_table
 l_fcat = p_l_fcat ).
ENDFORM. " display_data

I don't know how to read the code you pasted or I would have checked this myself.
Do your fields in the internal table reference dictionary objects or elementary types? If not using dictionary types, the column names will be blank by default. If you can't change your fields to be dictionary types, you can try this to change the column names:
I made a method inside my local class to add the names:
 call method set_colname
 EXPORTING iv_tab = alv_tab
 iv_colid = 'xxxx' "fieldname from the table
 iv_stxt = text-t54
 iv_mtxt = text-t55
 iv_ltxt = text-t55.
METHOD set_colname .
data:
 alv_cols type REF TO cl_salv_columns_table,
 alv_col type REF TO cl_salv_column.
TRY .
*... Change fieldnames
 call METHOD iv_tab->get_columns RECEIVING value = alv_cols.
 call method alv_cols->get_column EXPORTING columnname = iv_colid RECEIVING value = alv_col.
 IF iv_stxt <> ''.
 CALL METHOD alv_col->set_short_text EXPORTING value = iv_stxt.
 ENDIF.
 IF iv_mtxt <> ''.
 CALL METHOD alv_col->set_medium_text EXPORTING value = iv_mtxt.
 ENDIF.
 IF iv_ltxt <> ''.
 CALL METHOD alv_col->set_long_text EXPORTING value = iv_ltxt.
 ENDIF.
 CATCH cx_salv_not_found.
ENDTRY.
ENDMETHOD. "set_colname

Detail sections not displayed with Crystal Reports 2010 Runtime (SP1 also)

I have migrated a VB app from RDC 9 to Crystal Reports 2010 and I'm experiencing a very strange issue.
In a report with 6 nested groups, the detail part is splitted in 7 section, and the whole detail has the "keep together" flag activated. At runtime, some detail sections are not displayed. There is no suppress condition on the detail section. The missed sections are those near bottom of the page. I suppose that when there is no room to print the section on the page and it should go on the next page, Crystal forget to display it.
I exported the report in Crystal format and reopened with Crystal Reports designer and the missed section are displayed.
The same report is displayed correctly using RDC 9.
If I show the group tree and select the missed section group, the section is correctly displayed on a separate preview page.
I've some screenshot to better demonstrate the problem.
I hoped SP1 will resolve the issue but unfortunately it didn't.
Pier Alberto Guidotti

This issue has been escalated for a fix. tracking number is TE5000325237. For anyone wanting to attach to this thread with a similar issue, please note the behavior as decribed in the TE below. If the description does not match your issue exactly, please create a new thread.
Description - Steps to Reproduce;
1) Run the report in the CR 2008 designer - note the second page
2) Run the report in VS2010 app using CRVS2010 SP1:
CrystalReportViewer1.ReportSource = <path to report>
3) Look at page 2 and compare to page 2 from the CR2008 designer (also, see attached compare.jpg file which is a screen shot of both views) - note missing group on page 2
4) Export to PDF, DO, RTF - same issue
5) Print to printer using the viewer print button - same issue
6) Same issue print to printer using code:
Dim crReportDocument As New CrystalDecisions.CrystalReports.Engine.ReportDocument()
crReportDocument.Load("C:\Crystal\Test\Forum tests\Alberto missing detail section\Crystal Issue\Distinta di Taglio CR 2010.rpt")
crReportDocument.PrintToPrinter(1, 1, 1, 2)
 MsgBox("Done")
7) Same issue print to printer using code:
Dim crReportDocument As New CrystalDecisions.CrystalReports.Engine.ReportDocument()
crReportDocument.Load("C:\Crystal\Test\Forum tests\Alberto missing detail section\Crystal Issue\Distinta di Taglio CR 2010.rpt")
Dim rcd As ISCDReportClientDocument
 rcd = crReportDocument.ReportClientDocument
 rcd.PrintOutputController.PrintReport()
 MsgBox("Done")
8) Export to RPT file format - view this export in the CR2008 Designer - report looks as it should
9) Add report to the .NET2010 project. trying to view the repor tin the .NET2010 IDE results in .NET crashing.
- Ludek

Chart are not supported in crystal report - on top of SAP R/3

Hi All,
I have made one crystal report on top of SAP R/3 system. I have included some graphs on it.
But when i uploaded that report on infoview portal, it shows blank page when i try to view it on portal. It works fine in Crystal Report 2008.
I have one other report without graphs, it works fine on infoview portal. This reports works fine with "Enterprise" authentication.
Products:
- Crystal Report 2008
- Business object Enterprise 3.0
- Authentication: Enterprise
Please help as soon as possible.
Regards,
Rishit

Hi..
Ya.. its strange!! Because when i have created a report without Chart.. it works fine on portal. But when i added a chart in same i get blank page.
And have you make that report on top of SAP R/3 (Or ECC).
Even when i have made report on top of SAP BI with chart.. it works fine on portal.
The issue is just with SAP R/3 (Or ECC).
Regards,
Rishit

Erro in Hierarchy Display in Crystal Report 2008

HI Experts,
I have connected MDX Query with Crystal Reports 2008. In my MDX Query, I took G/L Account as an Info-object Hierarchy in which there are more than 10 nodes and each nodes having G/L accounts range. When i tried to create a crystal report from MDX query, in G/L account field i am not getting hierarchy but all G/L accounts comes together.
How to get hierarchy of an infoobject in crystal report ?
Regards,
Rishit Kamdar

HI,
to get or find an answer/solution about your question/problem?
I planning also to use Hierarchy Display in CR. And it is very interessting for me to know if that is working.
Thanks
Andreas

Report and Field Explorer dont work in Crystal Reports 2008

Hi
I am using the following versions of Crystal Reports:
Crystal Reports 2008 (Service Pack 1)
CR Developer
Version 12.1.0.892
Product Type: Full
Target environment: .NET 3.5 windows forms and asp.net application
Since a couple of days, i can no longer access the field explorer nor the report exlorer. Anything else seems to be working fine. I first thought these windows were somewhere hidden behind another window but as much as i searched, i didnt succed in finding them :-(. Our product has a valid licence and is registered, by the way.
My question is now, what do i have to do to get my field/report explorer again. Maybe, installing the latest service pack had an influence, but i cannot tell for sure.
Any help is appreciated
Thanks in advance

Please note that this forum is dedicated to topics related to custom application development or deployment with Crystal Reports in .Net. This includes full versions of Crystal Reports as well as those versions of Crystal Reports bundled with Microsoft Visual Studio .Net.
Your query appears to concern the CR designer. As such, please post your query to the Crystal Reports Design Forum:
SAP Crystal Reports
Ludek

Sub Report not working in Crystal Report 2008 using JSP

I am having developer license of Crystal Report 2008. I am able to generate report using Java JDK 1.5 , JSP,Oracle10g , deployed on WebSphere Application Server 6.1.0.29. I am not able to generate Sub reports. Can you please help us with sample code to how to call and configure subreport and please send configuration CRConfig.xml.
The below Error is Occurred on generating report.
On condition when we link the main report to subreport through parameter.
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: java.lang.NullPointerException---- Error code:-2147467259 Error code name:failed
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(SourceFile:741)
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(SourceFile:167)
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.a(SourceFile:529)
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.call(SourceFile:527)
 at com.crystaldecisions.reports.common.ThreadGuard.syncExecute(SourceFile:102)
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.for(SourceFile:525)
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.int(SourceFile:424)
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(SourceFile:352)
 at com.businessobjects.sdk.erom.jrc.a.a(SourceFile:54)
 at com.businessobjects.sdk.erom.jrc.a.execute(SourceFile:67)
 at com.crystaldecisions.proxy.remoteagent.RemoteAgent$a.execute(SourceFile:716)
 at com.crystaldecisions.proxy.remoteagent.CommunicationChannel.a(SourceFile:125)
 at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(SourceFile:537)
 at com.crystaldecisions.sdk.occa.report.application.ds.a(SourceFile:186)
 at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(SourceFile:1558)
 at com.crystaldecisions.sdk.occa.report.application.ReportSource.getPage(SourceFile:767)
 at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.getPage(SourceFile:324)
 at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.getPage(SourceFile:149)
 at com.businessobjects.report.web.event.s.a(SourceFile:158)
 at com.businessobjects.report.web.event.s.a(SourceFile:127)
 at com.businessobjects.report.web.event.bt.a(SourceFile:47)
 at com.businessobjects.report.web.event.bw.broadcast(SourceFile:93)
 at com.businessobjects.report.web.event.am.a(SourceFile:53)
 at com.businessobjects.report.web.a.t.if(SourceFile:2104)
 at com.businessobjects.report.web.e.a(SourceFile:300)
 at com.businessobjects.report.web.e.a(SourceFile:202)
 at com.businessobjects.report.web.e.a(SourceFile:135)
 at com.crystaldecisions.report.web.ServerControl.a(SourceFile:607)
 at com.crystaldecisions.report.web.ServerControl.processHttpRequest(SourceFile:342)
 at com.ibm._jsp._CrystalReportViewer._jspService(_CrystalReportViewer.java:107)
 at com.ibm.ws.jsp.runtime.HttpJspBase.service(HttpJspBase.java:87)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
 at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1143)
 at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:591)
 at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:481)
 at com.ibm.wsspi.webcontainer.servlet.GenericServletWrapper.handleRequest(GenericServletWrapper.java:122)
 at com.ibm.ws.jsp.webcontainerext.AbstractJSPExtensionServletWrapper.handleRequest(AbstractJSPExtensionServletWrapper.java:226)
 at com.ibm.ws.jsp.webcontainerext.AbstractJSPExtensionProcessor.handleRequest(AbstractJSPExtensionProcessor.java:286)
 at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:3453)
 at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:267)
 at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:815)
 at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1466)
 at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:119)
 at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:458)
 at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:387)
 at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.java:102)
 at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:165)
 at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217)
 at com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161)
 at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:136)
 at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:196)
 at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:751)
 at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:881)
 at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1473)
Caused by: java.lang.NullPointerException
 at oracle.jdbc.driver.OracleResultSetMetaData.<init>(OracleResultSetMetaData.java:84)
 at oracle.jdbc.driver.ScrollableResultSet.getMetaData(ScrollableResultSet.java:1282)
 at com.crystaldecisions.reports.common.data.JdbcCrystalResultSet.getMetaData(Unknown Source)
 at com.businessobjects.reports.jdbinterface.common.ResultSetReader.bindToField(Unknown Source)
 at com.crystaldecisions.reports.queryengine.ResultSetRecordReader.a(SourceFile:80)
 at com.crystaldecisions.reports.queryengine.Rowset.a(SourceFile:1107)
 at com.crystaldecisions.reports.queryengine.Rowset.z9(SourceFile:1025)
 at com.crystaldecisions.reports.queryengine.Rowset.Aa(SourceFile:988)
 at com.crystaldecisions.reports.queryengine.Rowset.z3(SourceFile:967)
 at com.crystaldecisions.reports.queryengine.Rowset.bL(SourceFile:533)
 at com.crystaldecisions.reports.queryengine.Rowset.zM(SourceFile:245)
 at com.crystaldecisions.reports.queryengine.RowsetBase.zA(SourceFile:156)
 at com.crystaldecisions.reports.queryengine.QueryInfo.vE(SourceFile:261)
 at com.crystaldecisions.reports.datafoundation.DFQuery.for(SourceFile:628)
 at com.crystaldecisions.reports.datalayer.a.do(SourceFile:1621)
 at com.crystaldecisions.reports.datalayer.a.a(SourceFile:1404)
 at com.crystaldecisions.reports.dataengine.m.b(SourceFile:334)
 at com.crystaldecisions.reports.dataengine.j.b(SourceFile:515)
 at com.crystaldecisions.reports.dataengine.m.o(SourceFile:408)
 at com.crystaldecisions.reports.dataengine.m.a(SourceFile:173)
 at com.crystaldecisions.reports.dataengine.ContextNode.a(SourceFile:114)
 at com.crystaldecisions.reports.dataengine.ContextNode.a(SourceFile:95)
 at com.crystaldecisions.reports.dataengine.j.case(SourceFile:1080)
 at com.crystaldecisions.reports.dataengine.h.<init>(SourceFile:108)
 at com.crystaldecisions.reports.dataengine.DataContext.a(SourceFile:254)
 at com.crystaldecisions.reports.dataengine.DataProcessor2.a(SourceFile:4660)
 at com.crystaldecisions.reports.dataengine.DataProcessor2.a(SourceFile:4574)
 at com.crystaldecisions.reports.dataengine.DataProcessor2.new(SourceFile:2652)
 at com.crystaldecisions.reports.dataengine.DataProcessor2.byte(SourceFile:2610)
 at com.crystaldecisions.reports.dataengine.DataProcessor2.try(SourceFile:2282)
 at com.crystaldecisions.reports.dataengine.DataProcessor2.int(SourceFile:2442)
 at com.crystaldecisions.reports.dataengine.DataProcessor2.I(SourceFile:1013)
 at com.crystaldecisions.reports.dataengine.DataProcessor2.if(SourceFile:4816)
 at com.crystaldecisions.reports.dataengine.DataProcessor2.a(SourceFile:2020)
 at com.crystaldecisions.reports.formatter.formatter.objectformatter.ObjectFormatter.a(SourceFile:309)
 at com.crystaldecisions.reports.formatter.formatter.objectformatter.ObjectFormatter.a(SourceFile:250)
 at com.crystaldecisions.reports.formatter.formatter.objectformatter.u.a(SourceFile:922)
 at com.crystaldecisions.reports.formatter.formatter.objectformatter.u.e(SourceFile:784)
 at com.crystaldecisions.reports.formatter.formatter.objectformatter.u.for(SourceFile:242)
 at com.crystaldecisions.reports.formatter.formatter.objectformatter.aa.a(SourceFile:64)
 at com.crystaldecisions.reports.formatter.formatter.objectformatter.ObjectFormatter.a(SourceFile:243)
 at com.crystaldecisions.reports.formatter.formatter.objectformatter.ObjectFormatter.a(SourceFile:210)
 at com.crystaldecisions.reports.formatter.formatter.objectformatter.v.a(SourceFile:185)
 at com.crystaldecisions.reports.formatter.formatter.objectformatter.v.a(SourceFile:230)
 at com.crystaldecisions.reports.formatter.formatter.objectformatter.ai.for(SourceFile:359

I'm not sure I understand what you mean by tabbed reporting. Do you mean having multiple reports open at once within the Crystal Reports Designer?
If this is the case, the viewer is designed to only have one report open at a time.

Fields in Stored Procedure does not appear in Crystal reports 2008.

hi,
I am now using crystal reports 2008 evaluation copy for 30 days. I am trying to create a stored procedure with parameter, here is my sample Stored Procedure code;
DELIMITER $$
DROP PROCEDURE IF EXISTS `puerto`.`SP_FindEmployees`$$
CREATE DEFINER=`root`@`localhost` PROCEDURE `SP_FindEmployees`(SIDNo VARCHAR(10))
BEGIN
SELECT * FROM employees WHERE IDNo=SIDNo;
END$$
DELIMITER ;
when i try to call the procedure in sqlyog here is my sample code;
CALL sp_findemployees('0000000001')
it is successfull, but when i try to connect it with crystal reports 2008 I got no fields in my stored procedure andi got this error message ;
"Database Connector: 'HY00:[MySQL][ODBC 3.51 Driver][mysqld-5.1.33-community]incorect number of arguments for procedure puerto.sp_findemployees; expected 1, got 0 [Database vendor code: 1318]"
CR2008 was not asking a parameter values.
But when I try using stored procedure that i've made in MSSQL, CR2008 asking parameters and succefully created the reports needed.
My Objective is to make a stored procedure in MySQL by using select statement and filter it with parameter(s) that I will pass and CR2008 will use this stored procedure.
i also try the view with this code below and it was successfull in CR2008.
DELIMITER $$
DROP VIEW IF EXISTS `puerto`.`ep_employees`$$
CREATE ALGORITHM=UNDEFINED DEFINER=`root`@`localhost` SQL SECURITY DEFINER VIEW `ep_employees` AS (SELECT `employees`.`IDNo` AS `IDNo`,`employees`.`FullName` AS `FullName` FROM `employees`)$$
DELIMITER ;

hi,
Crystal Reports 2008 and MySQL 5 , ODBC driver 3.5 and ODBC driver 5.1.
I use ODBC connector 3.5 because I got errors in ODBC drivers in 5.1.
Do you have step by step procedure for creating add command dialog box?
I try creating the add command dialog box
here's my sample sql statement i don't know if its correct because no data appearing in my crystal report
Select * from employees where idno=@IDNo
in Command Parameter Dialog Box
Parameter Name = @IDNo
Prompting Text = @IDNo
Value Type = String
DefaultValue = 0
thanks!

Danish character and Symbol are not displaying in crystal report 2008

Similar Messages

Maybe you are looking for