Danny Richardson: Please read and reply if you can

Hello Danny
I am pretty much greatful with your help and assistance in resolving my issue. Of course your guidlines helped alot, no doubt. I followed your hints and made the changes as you directed, however, still the report is not reflecting the desired changes. What I find other than the DESNAME changes, the system parameters like DESTYPE, MODE and ORIENTATION have fixed width 80 which I can not change. I was thinking if we can change that, then probably it will reflect what we want, but I can not change them because they are fixed. How can I change it I don't know. Do you have any hints here? As it is fixed for all reports I have here. I dont even know if this could be set initially when they install the report designer or what.
Your help will again be appreciated.
Thanks so much for you help,
Zahir

If you want to change the system parameters width, you should first change the report width in the Layout section of the report. Go to the Main Section in the layout Model and open the property sheet. Then change the width of the report. This new width will now be reflected in the system parameters as well.
Good luck.
Hello Danny
I am pretty much greatful with your help and assistance in resolving my issue. Of course your guidlines helped alot, no doubt. I followed your hints and made the changes as you directed, however, still the report is not reflecting the desired changes. What I find other than the DESNAME changes, the system parameters like DESTYPE, MODE and ORIENTATION have fixed width 80 which I can not change. I was thinking if we can change that, then probably it will reflect what we want, but I can not change them because they are fixed. How can I change it I don't know. Do you have any hints here? As it is fixed for all reports I have here. I dont even know if this could be set initially when they install the report designer or what.
Your help will again be appreciated.
Thanks so much for you help,
Zahir

Similar Messages

  • Computer suddenly ridiculously slow. Please read, and help if you can.

    Problem description:
    I very recently did a clean install of Yosemite, and everything was going great, but all of a sudden, everything slowed down like crazy today. The cursor moves slow. Clicks take MINUTES to register, and Chrome, Firefox, and Safari lock up completely. If I don’t start Activity Monitor and have in running in the front pane to see what is happening, it becomes impossible to load it at all, and I end up having to do a hard reset.
    EtreCheck version: 2.0.10 (97)
    Report generated November 1, 2014 at 7:44:49 PM EDT
    Hardware Information: ℹ️
      MacBook Pro Intel Core i5, Intel Core i7 (Mid 2010)
      MacBook Pro - model: MacBookPro6,2
      1 2.66 GHz Intel Core i7 CPU: 2-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1067 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1067 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics - VRAM: 288 MB
      Color LCD 1680 x 1050
      NVIDIA GeForce GT 330M - VRAM: 512 MB
    System Software: ℹ️
      OS X 10.10 (14A389) - Uptime: 0:31:49
    Disk Information: ℹ️
      ST9500420ASG disk0 : (500.11 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      PPBE_BOOT (disk0s4) /Volumes/PPBE_BOOT : 36 MB (30 MB free)
      disk0s2 (disk1) /  [Startup]: 498.84 GB (483.82 GB free)
      Core Storage: disk0s2 499.21 GB Online
      MATSHITADVD-R   UJ-898 
    USB Information: ℹ️
      Apple Internal Memory Card Reader
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Built-in iSight
      Apple Computer, Inc. IR Receiver
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Library/Application Support/Avast/components/fileshield/unsigned
      [loaded] com.avast.AvastFileShield (2.1.0 - SDK 10.9) Support
      /Library/Application Support/Avast/components/proxy/unsigned
      [loaded] com.avast.PacketForwarder (1.4 - SDK 10.9) Support
    Problem System Launch Daemons: ℹ️
      [failed] com.apple.systemstatsd.plist
    Launch Agents: ℹ️
      [loaded] com.avast.userinit.plist Support
    Launch Daemons: ℹ️
      [loaded] com.avast.init.plist Support
      [loaded] com.avast.uninstall.plist Support
      [loaded] com.avast.update.plist Support
    User Launch Agents: ℹ️
      [invalid?] com.avast.home.userinit.plist Support
      [loaded] com.google.keystone.agent.plist Support
      [loaded] com.valvesoftware.steamclean.plist Support
    User Login Items: ℹ️
      iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      Steam Application (/Applications/Steam.app)
    Internet Plug-ins: ℹ️
      Default Browser: Version: 600 - SDK 10.10
      QuickTime Plugin: Version: 7.7.3
    Safari Extensions: ℹ️
      avast! Online Security
    3rd Party Preference Panes: ℹ️
      None
    Time Machine: ℹ️
      Time Machine not configured!
    Top Processes by CPU: ℹ️
          4% WindowServer
          1% sysmond
          0% Activity Monitor
          0% AppleSpell
          0% com.avast.daemon
    Top Processes by Memory: ℹ️
      125 MB com.avast.daemon
      103 MB mds_stores
      94 MB WindowServer
      77 MB Safari
      73 MB com.apple.WebKit.WebContent
    Virtual Memory Information: ℹ️
      1.03 GB Free RAM
      1.44 GB Active RAM
      982 MB Inactive RAM
      712 MB Wired RAM
      1.93 GB Page-ins
      4 KB Page-outs

    Launch Daemons-    [failed] com.apple.systemstatsd.plist                                  The systemstats process is used to retrieve information about system statistics and power usage, and though it usually runs unnoticed in the background, the systemstatsd and systemstats processes have been known to randomly go haywire in OS X, eating up 100%-300% or more CPU while slowing down a Mac. You Built in Search engine could be indexing Maybe

  • Kernel panic(s): please read and help if you can

    I've had a couple kernel panics in the past few days; I believe that two of them happened when I was away from the computer and the computer then (eventually) shut its display off, so that when I returned to the computer, it was completely unresponsive except to holding down the power button for a little while and then restarting. I've pasted the last few k.p. log files here; can anyone tell me if they are related, and what they are? (and perhaps also a quick k.p. log file primer, so I'll know what to look for in the future?)
    thanks!
    Wed Dec 26 20:31:24 2007
    panic(cpu 0 caller 0x0039CD77): "m_free: freeing an already freed mbuf"@/SourceCache/xnu/xnu-1228.0.2/bsd/kern/uipc_mbuf.c:2742
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x346cb838 : 0x12b0e1 (0x455670 0x346cb86c 0x133238 0x0)
    0x346cb888 : 0x39cd77 (0x48e03c 0x1 0x3453d01c 0xffff8863)
    0x346cb8c8 : 0x39d073 (0x304eaa00 0x8 0x346cb918 0x1)
    0x346cb8e8 : 0x9e3b87 (0x304eaa00 0x0 0x20 0x346cbee8)
    0x346cba58 : 0x9e3ec5 (0x23b782c8 0x23b7a150 0x0 0x0)
    0x346cbba8 : 0x9edfe9 (0x23c77004 0x0 0x202 0x0)
    0x346cbc08 : 0x9f1b0a (0x23b784c0 0x346cbdcc 0x346cbc38 0x2)
    0x346cbde8 : 0x9f2fb1 (0x23b782c8 0x202 0x346cbe18 0x3d9e57)
    0x346cbf18 : 0x41d149 (0x23b78000 0x42d6b80 0x1 0x19ccc1)
    0x346cbf68 : 0x41c2a6 (0x42d6b80 0x0 0x346cbfc8 0x13ea59)
    0x346cbf98 : 0x41bf88 (0x42d4f80 0x42d4f80 0xbfff7540 0x868c3c8)
    0x346cbfc8 : 0x19e2ec (0x42d4f80 0x0 0x1a10b5 0x4e123c8)
    Backtrace terminated-invalid frame pointer 0
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.driver.AirPort.Atheros(300.22)@0x9be000->0xa48fff
    dependency: com.apple.iokit.IO80211Family(200.7)@0x9a0000
    dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63c000
    dependency: com.apple.iokit.IONetworkingFamily(1.6.0)@0x64c000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    9B18
    Kernel version:
    Darwin Kernel Version 9.1.0: Wed Oct 31 17:46:22 PDT 2007; root:xnu-1228.0.2~1/RELEASE_I386
    System model name: MacBook2,1 (Mac-F4208CA9)
    Tue Dec 25 21:51:56 2007
    panic(cpu 1 caller 0x0039CD77): "m_free: freeing an already freed mbuf"@/SourceCache/xnu/xnu-1228.0.2/bsd/kern/uipc_mbuf.c:2742
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x412c3978 : 0x12b0e1 (0x455670 0x412c39ac 0x133238 0x0)
    0x412c39c8 : 0x39cd77 (0x48e03c 0x30280500 0x3456201c 0x9f01c6)
    0x412c3a08 : 0x39d073 (0x30260a00 0x8 0x412c3a58 0x1)
    0x412c3a28 : 0x9e3b87 (0x301fa400 0x0 0x20 0x2)
    0x412c3b98 : 0x9e3ec5 (0x23bfe2c8 0x23c00150 0xb0572 0x0)
    0x412c3ce8 : 0x9ef20b (0x23c7b004 0x0 0x3cdde3c 0x19ccc1)
    0x412c3e68 : 0x9bf84a (0x23bfe4c0 0x3c79254 0x412c3e88 0x1a136f)
    0x412c3eb8 : 0x9c0f3f (0xa47c80 0xa47c84 0xbfe00000 0x0)
    0x412c3f48 : 0x9bf4b7 (0x3ce5004 0x0 0x0 0x19ccc1)
    0x412c3f78 : 0x13e987 (0x3ce5494 0x3ce5004 0x0 0xbfff7540)
    0x412c3fc8 : 0x19e2ec (0x0 0x0 0x1a10b5 0x63fbca0)
    Backtrace terminated-invalid frame pointer 0
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.driver.AirPort.Atheros(300.22)@0x9be000->0xa48fff
    dependency: com.apple.iokit.IO80211Family(200.7)@0x9a0000
    dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63c000
    dependency: com.apple.iokit.IONetworkingFamily(1.6.0)@0x64c000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    9B18
    Kernel version:
    Darwin Kernel Version 9.1.0: Wed Oct 31 17:46:22 PDT 2007; root:xnu-1228.0.2~1/RELEASE_I386
    System model name: MacBook2,1 (Mac-F4208CA9)
    Tue Dec 25 14:17:19 2007
    panic(cpu 0 caller 0x0039CD77): "m_free: freeing an already freed mbuf"@/SourceCache/xnu/xnu-1228.0.2/bsd/kern/uipc_mbuf.c:2742
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x2e547978 : 0x12b0e1 (0x455670 0x2e5479ac 0x133238 0x0)
    0x2e5479c8 : 0x39cd77 (0x48e03c 0x3024aa00 0x3456901c 0x0)
    0x2e547a08 : 0x39d073 (0x302c5200 0x8 0x2e547a58 0x1)
    0x2e547a28 : 0x9e3b87 (0x30066500 0x0 0x20 0x2)
    0x2e547b98 : 0x9e3ec5 (0x23b892c8 0x23b8b150 0xe4387 0x0)
    0x2e547ce8 : 0x9ef20b (0x23c85004 0x0 0x3cf0c7c 0x19ccc1)
    0x2e547e68 : 0x9bf84a (0x23b894c0 0x3c89b80 0x2e547e88 0x1a136f)
    0x2e547eb8 : 0x9c0f3f (0xa47c80 0xa47c84 0xbfe00000 0x0)
    0x2e547f48 : 0x9bf4b7 (0x44c0804 0x0 0x0 0x19ccc1)
    0x2e547f78 : 0x13e987 (0x44c0c94 0x44c0804 0x0 0xb0000)
    0x2e547fc8 : 0x19e2ec (0x0 0x0 0x10 0x4a27ea0)
    Backtrace terminated-invalid frame pointer 0
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.driver.AirPort.Atheros(300.22)@0x9be000->0xa48fff
    dependency: com.apple.iokit.IO80211Family(200.7)@0x9a0000
    dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63c000
    dependency: com.apple.iokit.IONetworkingFamily(1.6.0)@0x64c000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    9B18
    Kernel version:
    Darwin Kernel Version 9.1.0: Wed Oct 31 17:46:22 PDT 2007; root:xnu-1228.0.2~1/RELEASE_I386
    System model name: MacBook2,1 (Mac-F4208CA9)
    Sat Dec 22 18:48:58 2007
    panic(cpu 0 caller 0x0039CD77): "m_free: freeing an already freed mbuf"@/SourceCache/xnu/xnu-1228.0.2/bsd/kern/uipc_mbuf.c:2742
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x367cb838 : 0x12b0e1 (0x455670 0x367cb86c 0x133238 0x0)
    0x367cb888 : 0x39cd77 (0x48e03c 0x1 0x373c201c 0x367cb898)
    0x367cb8c8 : 0x39d073 (0x305bb500 0x8 0x367cb918 0x1)
    0x367cb8e8 : 0x34ff7b87 (0x305bb500 0x0 0x20 0x367cbee8)
    0x367cba58 : 0x34ff7ec5 (0x2388c2c8 0x2388e150 0x367cbac8 0x1991a6)
    0x367cbba8 : 0x35001fe9 (0x2399a004 0x0 0x666e1f5c 0x5761)
    0x367cbc08 : 0x35005b0a (0x2388c4c0 0x367cbdcc 0x367cbc38 0x3d9e57)
    0x367cbde8 : 0x35006fb1 (0x2388c2c8 0x0 0x367cbf08 0x127206)
    0x367cbf18 : 0x41d149 (0x2388c000 0x49e1000 0x1 0x19ccc1)
    0x367cbf68 : 0x41c2a6 (0x49e1000 0x4bcc454 0x4bcc42c 0x0)
    0x367cbf98 : 0x41bf88 (0x4a7f1c0 0x0 0x367cbfc8 0x125f51)
    0x367cbfc8 : 0x19e2ec (0x4a7f1c0 0x0 0x1a10b5 0x4bcc410)
    Backtrace terminated-invalid frame pointer 0
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.driver.AirPort.Atheros(300.22)@0x34fd2000->0x3505cfff
    dependency: com.apple.iokit.IO80211Family(200.7)@0x347bd000
    dependency: com.apple.iokit.IOPCIFamily(2.4)@0x2e330000
    dependency: com.apple.iokit.IONetworkingFamily(1.6.0)@0x34641000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    9B18
    Kernel version:
    Darwin Kernel Version 9.1.0: Wed Oct 31 17:46:22 PDT 2007; root:xnu-1228.0.2~1/RELEASE_I386
    System model name: MacBook2,1 (Mac-F4208CA9)

    just had another one. looks very similar. I was running Azureus, iDVD, itunes, and other normal stuff.
    Thu Dec 27 00:15:29 2007
    panic(cpu 1 caller 0x0039CD77): "m_free: freeing an already freed mbuf"@/SourceCache/xnu/xnu-1228.0.2/bsd/kern/uipc_mbuf.c:2742
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x345ab838 : 0x12b0e1 (0x455670 0x345ab86c 0x133238 0x0)
    0x345ab888 : 0x39cd77 (0x48e03c 0x302e2500 0x3436a01c 0xffff8863)
    0x345ab8c8 : 0x39d073 (0x30318200 0x8 0x345ab918 0x1)
    0x345ab8e8 : 0x9edb87 (0x302e2500 0x0 0x20 0x52cf34bc)
    0x345aba58 : 0x9edec5 (0x23b882c8 0x23b8a150 0x345abac8 0x2)
    0x345abba8 : 0x9f7fe9 (0x23c8d004 0x0 0xc4a3c5c7 0xbcb)
    0x345abc08 : 0x9fbb0a (0x23b884c0 0x345abdcc 0x345abc38 0x3d9e57)
    0x345abde8 : 0x9fcfb1 (0x23b882c8 0x0 0x345abf08 0x127206)
    0x345abf18 : 0x41d149 (0x23b88000 0x43a9800 0x1 0x19ccc1)
    0x345abf68 : 0x41c2a6 (0x43a9800 0x0 0x0 0x0)
    0x345abf98 : 0x41bf88 (0x43ac940 0x0 0x345abfc8 0x125f51)
    0x345abfc8 : 0x19e2ec (0x43ac940 0x0 0x1a10b5 0x510b2e0)
    Backtrace terminated-invalid frame pointer 0
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.driver.AirPort.Atheros(300.22)@0x9c8000->0xa52fff
    dependency: com.apple.iokit.IO80211Family(200.7)@0x9aa000
    dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63c000
    dependency: com.apple.iokit.IONetworkingFamily(1.6.0)@0x64c000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    9B18
    Kernel version:
    Darwin Kernel Version 9.1.0: Wed Oct 31 17:46:22 PDT 2007; root:xnu-1228.0.2~1/RELEASE_I386
    System model name: MacBook2,1 (Mac-F4208CA9)

  • Please watch and see if you can tell me how to correct the aspect ratio

    http://www.youtube.com/watch?v=shiFprOnbK4
    This is an unfinished std. def video hence this issue I ran into which is just a fun video for my youth group kids I teach at my church. I am editing it in final cut pro 7 and if you see at about 35 seconds the aspect ratio changes whatever its doing with the picture there.
    I have never ran into this problem before so I don't know if its something I may have selected on the camera accidentally or done wrong in FCP but I shot all the video the same day of course for this event of ours and all the other video is fine an in 16:9 or what was called the "letterbox" option on my Panasonic DVX100B.
    Please help me correct it if you know how. Thank you very much in advance.

    I can't watch the video as well. Not quite sure what trouble your having
    Aspect ratios can be tricky and there are a few spots you can mess them up. First I would check to make sure that your sequence settings are the same aspect ratio as your original footage. I would also make sure your exporting with the correct aspect ratio as well. (If you’re using the quicktime conversion option. Sometimes depending on your settings options like 16:9 are not turned on by default and you need to check them before exporting.)
    Also if you can change the aspect ratio in FCP regardless of your sequence's aspect ratio is. Under your distort tab there is a aspect ratio option. +33 will make your footage 4:3 and -33 will make your footage anamorphic. However this will only stretch your footage. This method is only useful for when you can to place 4:3 footage into a 16:9 sequence without it appearing distorted and stretched

  • Future Things we want Rim to Fix on the Blackberry Playbook (RIM Please read and reply) Paying customers need some feedback.

    Since we all purchased this item for the Flash on the Go experience let make sure we have the following in the next OS update please
    Stereo Bluetooth (Can't sync with my Car Stereo) Ford Focus
    for those long road trips
    NetFlix App paying subscriber
    Hulu App paying subscriber
    Scapbook App that was premiered before the release of the BB playbook
    Android
    Please add to the list so Rim will read.  Paying $499.99 to 699.99 for something that is a paperweight because of the things we can't have and there are list of websites we can't even access why? 

    Also VERY IMPORTANT!!!!!!!
    We need a FILE MANAGER ASAP!
    this to me is crucial cause i cant manage anything in terms of files right now on my playbook and i have 64GB of data i could store but there is no point of filling it all up if i cant even manage any files as of right now. its to the point that i rather store stuff in my BB smartphone than in my PB! which makes no sense!
    Also,
    -auto correction would be nice
    -view pictures in portrait mode
    -themes on PB would be great
    -wi-fi music sync just like on my BB smartphone would be very good as well
    -a .rar and .zip file opener and extractor for downloaded files
    -BBM BBM BBM BBM! please BBM!
    -Social feed app! that ill be amazing! or bridging the one i have on my BB smartphone!
    -BB protect for PB is going to be necessary and mandatory over time! very important!
    for now that will be all...

  • Quick Question!!! Please Read and reply.

    I have the old iTunes, and every time I try to buy music from the music store, it tells me to update to iTunes 7. I have tried to update to iTunes 7, but either nothing comes up for a download or at the end of the long update, it says invalid and closes. I want to buy songs, but I don't know what to do. Please HELP!
      Windows XP  

    If your on dail up, download AND SAVE it with a download manager program
    For dail up or broadband, try downloading with a different browser and save it.
    After the download is done disable your antivirus and install it

  • HT4995 please read and help if you are able!!!!

    i just realized that i might have left my phone at the counter of  a store after a very looonngg week at work, something i have never done since i purchased my first iphone in 2007. the store is now closed, although in my town, my chances of recopvery are SLIM, plus it was low on batter, how do I use the gps thing????

    icloud.com
    log-in with your Apple ID to use the Find My iPhone application.

  • AAAAUURRRRRGGGH!HHH!!!! please read and help (if u can... )

    ok, i FINALLY got everything working fine. Then today, I go to plug my iPod in and it says, "iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used with iTunes." well, fine. I did. And i did again. And it still says that everytime I plug it in and try to update. It's no longer named Ian's iPod and its completely blank. I don't know why it might be in recovery mode but yea. I don't even know what it means to be in "recovery mode"....AURGH! please help me!

    Try this.
    Click on control panel/admin tools/computer management/disk management/right click on the iPod to re-assign the drive letter.
    Choose something lower down the alphabet, say 'M' or something similar.
    The iPod can be confused by any other storage devices assigned a similar drive letter even though they may not connected at the same time.

  • I want a new iPhone. Plz read and help if you can.

    I have a 4gb iPhone. I've done ALOT of damage to it. Not on purpose though. I've dropped it and the plastic black portion fell off and the silver part on the back 'ripped' and there is a crack in the bottom of it and one of the screws fell off. I have the apple care for it but I know they won't do anything because it was accedental. It works but not as hood as it used too. Also when the sdk comes out how much memory will the apps use? Its only a 4gig and it only has like 200mb left. If I was to buy a new 8gig iPhone
    1) will I be able to pop my sim inane sync and itbe ok?
    2) will I have to start a new new 2 year contract
    And 3) will I be able tooge the apple care to it?
    thanks in advance

    AppleCare will not cover the repair for this or in this case what needs to be replaced with a new iPhone but instead of paying full price for an 8GB iPhone, AppleCare may charge you "only" $249 instead for the replacement for the iPhone only - not a complete retail package with everything included when purchasing a new iPhone.
    You transfer the SIM card from the old iPhone to the new iPhone abd a two year contract with AT&T is not required. If replaced with an 8GB for $249, the existing warranty remains in effect.
    If you purchase a new 8GB iPhone paying full retail price, everything is the same except the warranty on the new iPhone begins on the purchase date.

  • IPod Touch that will not go back to lockscreen please read and help if u can. Help is much appreciated.

    So i jailbroke my ipod a few years ago and right now i have 5.1, i was booting it and it usually goes fine, right now (currently) it is on a pineapple screen and will not go to my home screen/ lockscreen, i went to DFU mode and then press the power button. now all it does is stay on the black background and white apple screen. it wont ever go back to my lock screen can somebody reply to me and help me ASAP. plzzz im very desperate thank you

    oh and my ipod IS jailbroken right now on ios 5.1

  • Hi,  I'm looking for a online private tutor for teaching me Adobe Premiere Elements 8 through  remote cessions and Skype.  Willing to pay a good price for good tuition!  Please contact me asap  if you can help.  Thanks,  J Sussholz

    Hi,
    I'm looking for a online private tutor for teaching me Adobe Premiere Elements 8 through  remote cessions and Skype.
    Willing to pay a good price for good tuition!
    Please contact me asap if you can help.
    Thanks,
    J Sussholz

    Jacqui,
    I stongly believe that Steve has given you the best advice. Actually, it's the same advice that I would have given you, if I had seen your post first!
    I can verify that his books will give you more info, and in a more usable form, than tutoring, or even in-class, hands-on schooling will. Almost anything that can be done with the program (he also has a companion book for Photoshop Elements, which is often bundled with PrE) is covered in easy to understand detail.
    After reading through, and working along, his second bit of advice, Muvipix, is also sound. Between this, and Muvipix fora (Community tab), there have been very few questions that could not be answered. Muvipix also is a great resource for additional articles on how things are done, plus tutorials.
    I also recommend that one take an hour and read through both the FAQ and Tips & Tricks articles, found to the right of the PrE forum main page. I would read Steve's book first, so terms, etc. would be most clear.
    There are two on-line training sites, that get great reviews: www.lynda.com and www.ltotaltraining.com. I have not subscribed to either, but have used the materials furnished from them with various Adobe programs. I also have several of the lynda.com books on various programs, and they are well-written. Now, they are NOT one-on-one tutoring, which is what you are looking for. They also probably do not cover PrElements, but that is just my guess. If they do, they would be another good source of training, though it's through tutorials, and not direct instruction.
    This is just my 02¢'s worth of thought.
    Good luck,
    Hunt

  • Hi I've a big problem with adobe acrobat reader XI pro and I hope you can help me. The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reade

    Hi
    I've a big problem with adobe acrobat reader XI pro and I hope you can help me.
    The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reader (adobe pdf reader, internet browsers, ...etc.).
    This problem started to happen since yesterday when I installed adobe acrobat reader XI pro to try it before I buy it, and before that when I was using the free adobe pdf reader I was totally able to copy any text from any pdf and past it anywhere with nothing wrong.
    What can I do?
    thank you a lot.

    There is no product called Adobe Acrobat Reader Pro. There is
    - Adobe Acrobat Pro ($$)
    - Adobe Reader (free)
    Which do you have? And are you a programmer?

  • I AM HAVIN MANY PROBLEMS WITH MY IPOD PLEASE READ AND HELP

    I can't import movies on my iPod or even get it to show up on iTunes please help and respond if you know how to fix this problem.

    you may need to convert the videos to a format appropriate for the ipod to see them .which are .mov or .mp4 video files. to do this you will ened to convert the videos using a 3rd party software that is not suported by apple. windows users have had either trouble or success using this software.
    To use Videora iPod Convertor to convert movies for use on your iPod, consult these helpful links:
    To get started: http://www.videora.com/en-us/Converter/iPod/
    If you have questions: http://www.videora.com/en-us/Converter/guides.html
    If you have more questions, post them here: http://www.pspvideo9.com/forums/index.php?c=8
    Note that Videora iPod Convertor is a 3rd party program. If you need help with it, post your question there.
    GFF

  • Downloaded new ios8, my name is on my husbands iPad with my email and Apple ID. I am the primary for cloud drive. I try to add him as a family member and it says you can't add yourself!

    I Am set up as primary for Apple cloud drive.  my apple I'd comes up in my husbands settings on his iPad. I try to add him in the family section and it says you can't add yourself!  How do I get his apple I'd back to his cloud settings?,
    i downloaded the new software on his iPad and may have put in my Apple id and password!  How do I chabeg this?   Yikes!
    thank you!

    I ran into the same issue.
    Go to "Settings", "iCloud", scroll to the bottom and "sign out"  It will delete everything iCloud related upon your approval (don't worry, everything will remain in the cloud.  Once signed out, in the same settings location (under "Settings", "iCloud") sign in using his Apple ID and Password.
    Hope this helps.

  • If I report a problem and get a "you can't get

    If I report a problem and get a "you can't get your money back", is that the end or has the matter been sent to support for a look?
    What I did:
    I have family share and I found Xcom there with the cloud download symbol, I tapped it and it said "you can't download this", about how specific it was. I tapped it again and it started downloading, never asked for password (to my memory). Later I get an email stating that I had been charged for the game. I submitted a problem and got a fast response, "you can't get your money back". Now, is that it? Or has the matter been forwarded to Apple? If I am not happy, and it hasn't been forwarded where do I turn?

    It's Apple who told you no. That's it unless you want to try calling Apple Care.

Maybe you are looking for