DAQ board + view sensor temp and pressure + labview, how to run all item with LV ?

hi all,
it seems my duty almost clear....i just make manual programe with labview. So I have a case at my campus. We have a spakr-ignition machine, we use it for know how much we consume fuel,torque. I have a some PCI card (DAQ) some interface to connect it to PC. And I'm confiused to organize all item. Could you guys give some explanation for connected them with labview ? I will post a DAQ pic and interface pic.
thx
maput

Hello maput,
Thank you for contacting National Instruments. Ssk's suggestion of a starting point is a good place to begin. Many of our DAQ cards can handle -10 to 10V analog signals, however you may also have digital signals as well. Some places to look for how connect everything together are listed below:
DAQ Getting Started Guide
Field Wiring and Noise Considerations for Analog Signals
Here are some other good links to help you get started with programming:
Getting Started with DAQmx
National Instruments Training
Getting Started with NI-DAQmx: Getting Started with NI-DAQmx Programming in LabVIEW
Learn 10 Functions in NI-DAQmx and Handle 80 Percent of Your Data Acquisition Applications
If you provide the model numbers for your DAQ card as well as any connector blocks or cables you have, it would help even more than pictures. I hope these links give you some place to start. Please post back with any other questions you have.
Neal M.
NIC AE
www.ni.com/support
Neal M.Applications Engineering National Instruments www.ni.com/support

Similar Messages

In iTunes 10, I could type "Sinatra" in the search file, and would get a list of all tracks with "Sinatra" in any field.   In iTunes 11 I get these clever little windows, with nice arrows, but no lists to view.   What am I missing?

In iTunes 10, I could type "Sinatra" in the search file, and would get a list of all tracks with "Sinatra" in any field.   In iTunes 11 I get these clever little windows, with nice arrows, but no lists to view.   What am I missing?

Thanks for chipping in.   I discovered something after trying what you suggested.   I have quite a few collections of hits by year from Time Life and Billboard. I've eliminated duplicate tracks that appear in both collections (or other CDs for that matter), but cross-reference the CD where I deleted the track and placed in in the comments section of the CD track I retained.   If I "search" by song name, only the remaining track appears.   But if I want to hear for example Classic Rock 1964, only those tracks remaining would be there when I pull up that CD.   So, I type "Classic Rock 1964," in the search field. First the boxes on the right of the screen open up showing album icons. Showing four tracks by album with a button to view 10 more, then four songs with an option to vies 18 more.   I finally noticed that at the top of the boxes is a blue band that reads, :Show Classic Rock 1964 in Music. When I double click on this blue band, all 24 tracks from the original CD appear in the song list format even though I had deleted two of them because they appeard in a Beach Boys CD.   On those tracks, I had referenced Classic Rock 1964 in the comments field.    So, bottom line, Search will also look in the comments field if you click "filter by all" in the magnifying glass to the left of the search field.   And you can move all tracks that if finds into a song list by double clicking on the blue band.

I dont have any icons except computers and settings. how do i find istore with all my previous purchased content?

i dont have any icons except computers and settings. how do i find istore with all my previous purchased content?

That is the result when the Apple TV has lost the Internet connection.

My iPhone is having problems and I have to send it into Apple to get a fixed but in the mean while I need a phone. Could my old env touch act as a temporary replacement with the data plan? And if so how to I activate it with going to Verizon and once I ge

My iPhone is having problems and I have to send it into Apple to get a fixed but in the mean while I need a phone. Could my old env touch act as a temporary replacement with the data plan? And if so how to I activate it with going to Verizon and once I get my IPhone back will I be able to activate it without going to the Verizon store?!? Thanks:)

Im sorry. Im on my ipad and i didnt read that.
Sorry again

I own iwork '09 for my Imac I and just bought a Macbook Air, can I have have the suite on both computers, and if so how do I do this with no CD drive on the MBAir

I own iwork '09 for my Imac I and just bought a Macbook Air, can I have have the suite on both computers, and if so how do I do this with no CD drive on the MBAir

Welcome to Apple Support Communities
https://discussions.apple.com/message/18269126#18269126

HT5622 I own three Apple devices, but my iPad remained associated with my old email address and password. How can I register it with the same new email and password?

I own three Apple devices, but my iPad remained associated with my old email address and password. How can I register it with the same new email and password?

If you updated your existing account then try logging out of it on the iPad by tapping on the id in Settings > Store and then log back in and see if that 'refreshes' the account on the iPad. If you created a new account then any content that you purchased/downloaded via the old account will remain tied to that old account, and only that old account can download updates to its apps.

[svn] 1433: adding 'console' security constraint to MBeanServerGateway remote object for MBean tests and ds-console , used when running on Websphere with administrative security enabled.

Revision: 1433
Author: [email protected]
Date: 2008-04-28 13:13:12 -0700 (Mon, 28 Apr 2008)
Log Message:
adding 'console' security constraint to MBeanServerGateway remote object for MBean tests and ds-console, used when running on Websphere with administrative security enabled. Should call setCredentials("bob","bob1") to use this RO.
Modified Paths:
blazeds/branches/3.0.x/qa/apps/qa-regress/WEB-INF/flex/remoting-config.mods.xml
blazeds/branches/3.0.x/qa/apps/qa-regress/WEB-INF/flex/services-config.mods.xml

Hi,
It seems that you were using Hyper-V Remote Management Configuration Utility from the link
http://code.msdn.microsoft.com/HVRemote, if so, you can refer to the following link.
Configure Hyper-V Remote Management in seconds
http://blogs.technet.com/jhoward/archive/2008/11/14/configure-hyper-v-remote-management-in-seconds.aspx
By the way, if you want to perform the further research about Hyper-V Remote Management Configuration Utility, it is recommend that you to get further
support in the corresponding community so that you can get the most qualified pool of respondents. Thanks for your understanding.
For your convenience, I have list the related link as followed.
Discussions for Hyper-V Remote Management Configuration Utility
http://code.msdn.microsoft.com/HVRemote/Thread/List.aspx
Best Regards,
Vincent Hu

I am using Toast 11 to burn dvd's. With FCP10.1.3 I could go into the FCP shared folder grab the encoded .m2v file and drag it into Toast 11 and author dvd and burn. How can you do this with FCP 10.1.4?

I am using Toast 11 to burn dvd's. With FCP10.1.3 I used to go into the FCP shared folder grab the encoded .m2v file and drag it into Toast 11 and author dvd and burn. How can you do this with FCP 10.1.4?

BenB it creates a disc image only and it's not in .m2v. I think it saved it as an Apple Pro Res 422 format instead. The disc image file format will not allow
Toast 11 to create menus etc. Thanks for your help.

How to run two programs with one PC and two monitors

Good Morning,
I have a requirement to run a parallel loop and update the progress in two monitors with one computer.
For ex: its a two test stage, the process and progress of the 1st stage needs to displayed in monitor1 and similarly for 2nd stage to monitor 2 with program running with one computer.Would it be possible to do that.
Thanks in advance

Hi Parker,
yes, it's possible. You also have properties to set windows to specific monitors...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Hello!!!how can I control an omron plc (sysmac cqm1)with an OPC server?I want to adquire a signal controlling its amplitude and frecuency.How can it be done with OPC server?I already have the NI CD of OPC drivers.Thank you

Hello!!!how can I control an omron plc (sysmac cqm1)with an OPC server?I want to adquire a signal controlling its amplitude and frecuency.How can it be done with OPC server?I already have the NI CD of OPC drivers.Thank you

Hola Jose David, que OPC estas utilizando?, Si tienes comunicación entre tu computadora y PLC pero falla la comunicación entre el OPC y el PLC? La configuración y direcciones entre los dos es correcta? La comunicación es por cable serial?
Espero tus respuestas
Saludos
Benjamin C
Senior Systems Engineer // CLA // CLED // CTD

How to merge notes in iphone and ipad? how to save all the notes as backup so that it does not take up space

How to merge all notes from iphone and ipad together?
How to save all the notes in folder in external drive so that it will not take up space in iphone and ipad?

Becuse when I delte it still takes up. My memory I delted GBA4IOS a app from a website and still it takes 10GB of my memory.

Is Labview 5.0 run-time compatible with windows XP?

A client has a Labview 5.0 application (in japanese) running on a Win98 computer, they need to run it on a WinXP computer,
is it enough to install the LabVIEW 5.0 run-time on the WinXP computer for the application to work?
Where can I get the LabVIEW 5.0 run-time engine?

See here.
Time for your client to upgrade.

How to run .exe files with DAQ on a target PC?

Hi,
I want to run LabVIEW executable files on a target PC, where there is no LabVIEW installed. These files are used to do measurement using DAQ devices.
In order to run these .exe file, I guess that I should install both LabVIEW Runtime Engine and NI-DAQmx on the target PC. Is it right?
I'm wondering if it is mantatory to install NI-DAQmx on the target PC. I tried running .exe files without NI-DAQmx installed, but there was an error: nilvaiu.dll couldn't be found. Shouldn't this file be included automatically when building the executable files?
Thanks,
Qifu

No, none of the hardware drivers are included in the LabVIEW exe that you build. You have to install DAQmx. With LabVIEW 8.x, you can include the DAQmx driver with the installer that you create. You also have the option to install different versions of DAQmx. These different versions are smaller than the full DAQmx install (i.e. you may choose to install documentation, MAX. etc.). When you create the installer, you also inclue the LabVIEW run-time and you should also choose to install the hardware configureation that is in MAX.

How to run Speedy 33 with labVIEW 8.5 core software, Please send procedure.

Dear Sir
Wish u Happy New year (2010). I need a technical support for Speedy33. We have purchased NI speedy 33 h/w setup on 5/11/2008 from Tridet Techlabs Pvt. Ltd. Now we have got new(virtual Instrumentation) lab. when we purchased NI speedy 33 we have got only installation guide with the h/w. we want to run speedy33 with core s/w(LabVIEW8.5.1). So we kindly request you send procedure for running & working with speedy 33 using core module.
Thanking you
S. Antony Jesudurai
Lecturer, ICE Dept,.
Dr. Mahalingam College of engineering & technology,
Pollachi.
TamilNadu
India.

Happy New Year to you as well Dr. Mahalingam!
This forum is a predominently user supported one, although National Instruments monitors it and supports questions when they can, but it isn't an "official" communications pathway to National Instruments. To assure a response I would suggest contacting your nearest National Instruments representative in India, they probably can get you the info you need.
That having been said, while I don't have the info, another user may be able to assist you. As this is the beginning of a long holiday weekend, with many people taking today off, if you haven't seen a reply by Monday the 4th post a simple query to this thread to pop it back up on the "new question" area. As new questions come in, the older ones scroll down, until they are on an previous page, where they tend to get missed.
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

The CC and Bcc address fields have disappeared, all blue with no option below the To:

I am unable to add CC or Bcc as the address space beneath the To: has disappeared, it is blue like the surrounding area. So I have FROM; then TO: beneath as usual......... then nothing till SUBJECT:
In the To: box when I start an email address and several predictions appear, if I select one nothing appears. I have to type until the address I require appears in the To: box then if I click on it, the address stays. Then I want to send to multiple addresses there is nowhere to add them. If I Return from the To: box the address disappears.
Sorry it sounds so woolly but it's so hard to explain/understand. Seems to have been lost around the time of an upgrade to T.
Grateful for any help.

Mananged to drag dividing bar down and after completing To; box the return does create another To: which I can change to Cc: etc When I go back in to write another message I'm back at square one thanks.''Toad-Hall [[#answer-683355|said]]''
<blockquote>
It would be helpful if you could provide a screen shot of what you see to help convey the issue.
At the moment, it sounds like you have only one TO field displaying.
then when you add the email address it scrolls up - out of view - and then presents a new empty TO field.
When a TO field scrolls up there should be a scroll bar allowing you to see previously entered email addresses.
However, if there is only one TO field, it is possible that the scroll bar is not displaying.
Try this:
In a new Write message
Drag the dividing bar downwards.
See image below.
Move the mouse so it hovers over the dividing bar shown as red in the image. The cursor should change to a double headed arrow, then left click and hold down to grab the line.
Drag the line downwards to reveal more TO fields.
</blockquote>

DAQ board + view sensor temp and pressure + labview, how to run all item with LV ?

Similar Messages

Maybe you are looking for