Das Update „Aktualisierung des Apple Software-Installationsprogramms" konnte nicht gesichert werden. Die digitale Signatur dieses Updates fehlt oder ist nicht korrekt. Dieses Update wurde möglicherweise verändert, nachdem es von Apple signiert wurde. Das

Hallo, wenn ich mithilfe der Softwareaktualisierung aktualisieren will, erscheint nach dem runterladen folgende Fehlermeldung:
Das Update „Aktualisierung des Apple Software-Installationsprogramms“ konnte nicht gesichert werden.
Die digitale Signatur dieses Updates fehlt oder ist nicht korrekt. Dieses Update wurde möglicherweise verändert, nachdem es von Apple signiert wurde. Das Update wird bei der nächsten Softwareaktualisierung erneut geladen und geprüft.
Was ist die Ursache dafür. Bitte nur in deutsch antworten.
Gruß und Danke aus Adlershof

Download the installer again from Apple.

Similar Messages

  • Beim Importieren von CD`s  werden die Lieder in mehreren identischen Alben abgelegt und nicht in einem einzigen Album zusammengefasst. Wie kann man das verhindern?

    Beim Importieren von CD`s  werden die Lieder in mehreren identischen Alben abgelegt und nicht in einem einzigen Album zusammengefasst. Wie kann man das verhindern?

    Hallo zusammen
    So, heute habe ich noch eine Erkenntnis dazugewonnen und kann nun meine Zweite Frage von gestern selbst beantworten.
    Ja, der TRIM-Befehl von Windows kommt auf der SSD an.
    Herausgefunden habe ich das mit einem kleinen Tool namens Trimcheck, was nicht überprüft ob Windows den TRIM-Befehl sendet, sondern direkt auf der SSD testet, ob TRIM funktioniert. Dazu werden ein paar Zufallsdaten auf die SSD geschrieben und Trimcheck merkt sich genau die Sektoren, wo es das tut. Diese Daten werden sofort wieder gelöscht.
    Dann soll man etwa 20 Sekunden abwarten und das Programm erneut starten. Es schaut nun die vorher beschriebenen und wieder gelöschten Sektoren an und wenn TRIM funktioniert, dürfen da nur noch Nullen drin stehen, keine Reste der Zufallsdaten.
    Ganz offensichtlich klappt das alles so wie es sein soll.
    Meine andere Frage von gestern habe ich heute mit einem Arbeitskollegen diskutiert, der auch ab und zu mal an seinem Rechner herumbastelt. Der wußte auch keine Antwort zu geben, hat aber eine äußerst kluge Frage gestellt.
    Ist es denn wirklich ein Risiko dem Betriebssystem das Leeren des Schreibcaches einer SSD zu verbieten? Hat eine SSD überhaupt einen Schreibcache?
    Möglicherweise ist jetzt also schon alles in bester Ordnung, aber ein letzter Zweifel bleibt. Ich hätte gern noch eine Meinung von jemandem, der sich mit dieser Thematik wirklich auskennt.
    Gruß
    Michael

  • HT1491 I just updated my iphone 5 software/firmware now my inapp purchase won't re install any one else have this problem never updating again

    Can anyone help to solve this ?

    Have you tried restarting or resetting your iPhone?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPhone shuts down, then press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off".

  • "Die Datei "iTunes Library" konnte nicht gesichert werden. Ein unbekannter Fehler ist aufgetreten (-54).

    does somebody knows what this means?
    Thx Marc

    Ich habe es gestern Abend auch cirka 7 Mal probiert, mit dem iPhone 3GS und iPad 2. Aber schon Mal gut zu hören, dass ich nicht der Einzige bin der das Problem hat. Ich hatte immer den selben Fehler wenn das iOS Update hätte geladen werden sollen:
    Hoffentlich habe ich heute Abend etwas mehr Glück.
    Gruss

  • Mit Update auf 13.1 funktioniert scrollen nach unten nur, wenn die Anzeige mind. 2 Bilder breit ist.

    Ich kann im Organizer nur noch nach unten scrollen, wenn der Zoomfaktor so eingestellt ist, dass mehr als 1 Bild in der Breite angezeigt wird.
    Der Maustreiber ist überprüft und aktualisiert  - keine Änderung.
    Was kann ich tun?

    Hallo Jochen, vielen Dank für Deinen Tipp!Habe den Patch installiert, allerdings ändert dieser scheinbar nur einen Wert in der Registry, welcher sich mit dem AHCI-Protokoll der SATA-Schnittstelle befasst und die Energiespareinstellungen.  Leider keinen Erfolg. Trotzdem vielen Dank! Gruß, Lucas

  • Fehlermeldung/Error Message: Das Programm kann nicht gestartet werden, ...

    Beim Klicken auf .jpg und .dmg Dateien erscheint neuerdings die Fehlermeldung
    'Das Programm kann nicht gestartet werden, da das System nicht kompatibel ist.'
    Was bedeutet das?
    Ich habe einen Software-Fehler vermutet und versucht, das Proramm SoftwareRestore.pkg von der CD zu benutzen, allerdings startet das Programm nicht (beim Doppelklicken erscheint der aufgehende Rahmen; es passiert aber nichts).
    Gute Ratschläge?
    Herzlichen Dank im Voraus
    Elmar Schrohe
    English Version: When trying to open files with extensions like .jpg or .dmg I get the error message:
    Das Programm kann nicht gestartet werden, da das System nicht kompatibel ist.
    (My translation: Program can not be started as the system is not compatible).
    What does that mean?
    I suspected a software problem and tried to use the SoftwareResore.pkg from the CD, but that does not start (although it pretends).
    Good advice?
    Many thanks in advance
    Elmar Schrohe

    Thanks, Tom!
    This got me one step ahead (worked fine on .jpg-file), but the basic problems remain.
    (1) When I drag the .dmg files to StuffIt, it gives the error message
    "An error has occured attempting to mount a disk image "1015"
    Error #1015"
    I looked that up in a forum where it said I should repair permissions. I did that, but it did not help; I keep getting the message.
    (2) Trying to start AppleWorks I also get an error message
    Das Programm konnte nicht gestartet
    werden, weil ein Fehler in einer
    Gemeinschaftsbibliothek aufgetreten ist "-
    <AppleWorks><MW_MSL.PPC.Shlb><InterfaceLib><
    <div class="jive-quote">"
    My translation: The program could not be started because an error occured in a shared library "-<AppleWorks><MW_MSL.PPC.Shlb><InterfaceLib>"
    (3) That's why I thought I might use the SoftwareRestore.pkg which, however, does not seem to open. Is there a way of starting it anyway?
    Elmar

  • Message the older version of apple software can not be removed

    Hi,
    I have bought a new iphone4s and when I tried to install in to my itunes it told me I needed an updated version of itunes. So I downloaded the latest and get a message " The older version of Apple Software Update cannot be removed" and then the installer closes.
    I then retried but first removed all apple software from the pc, but with the same result.....help

    So I downloaded the latest and get a message " The older version of Apple Software Update cannot be removed" and then the installer closes.
    Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    To install the utility, doubleclick the msicuu2.exe file you downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Apple Software Updateentries and click "Remove", as per the following screenshot:
    Quit out of CleanUp, restart the PC and try another iTunes install (using an iTunesSetup.exe downloaded from the Apple Website). Does it go through properly this time?

  • ITunes can not connect to the apple software server says I am not connected to the internet and I am :(

    Apple software server says I am not conneted to the internet and I am. I need to update software on my iTouch.

    1.Power Cycle
       Power off the router. Unplug it from the wall. Wait a while.
       Plug it back to the wall. Power the router on. Wait until all the lights are lit properly.
       It will take a while.
      Restart the computer.
      Start up in Safe Mode.
       http://support.apple.com/kb/PH11212?viewlocale=en_US
    2.  Turn off Extensions, if any.
         Safari > Preferences > Extensions
    3. Turn off proxies, if selected.
         System Preference > Network > Advanced  > Proxies Tab
         Under "Select Protocol", uncheck any box if selected.
         Click "OK" then  "Apply"
    4. Uninstall anti-virus software, if any.
    5. A new Mac comes with 90 days of free tech support from AppleCare.
        AppleCare: 1-800-275-2273

  • When install iTunes 11.1.4   It says Apple Mobile Device Service service will not start.  It was started when I began the installation.  Is this an Apple software bug?

    When install iTunes 11.1.4   It says Apple Mobile Device Service service will not start.  It was started when I began the installation.  Is this an Apple software bug?

    I have this issue. It isn't the MSVCR80 issue. No matter what I do nothing will let me even INSTALL Apple Moblie Device. Further details are in my thread:
    https://discussions.apple.com/thread/5831093

  • When I boot in safe or regular mode, I get this on my Macbook Pro with upgraded Mavrick System Unapproved caller. SecurityAgentmay only be invoked by Apple software.  I can't boot my computer.

    Unapproved caller. SecurityAgentmay only be invoked by Apple software. I just upgraded to Maverick and now I can't boot in regular or safe mode on my Macbook Pro.

    I suggest you call Apple Care. However, the following is the BEST I can remember what I did as intructed by Apple Tech Support. I have a Time Machine Backup external hard drive.
    Turn off computer
    Turn on and @ first sign of life, press and hold the Option button
    Follow the directions:
    Click: Repair disk
    Click: Repair Disk permissions
    Get out of the section then pick the reinstall
    Option reinstall
    If that did not work: it did not for mine:
    Do the same as above and click erase disk. If you have a Time Machine Back up, you can return you Mac back into working order w/your applications software, i.e. Word: mac 2008, Skype, etc.
    Unplug you external hard drive to eliminate any possible confusion.
    After an  erase disk when starting like above (hold option button down while booting) and doing a total install,
    Plug in your external drive with you Time Machine backups.
    Only check applications and only users. Uncheck other files… and computer …
    http://www.bing.com/search?q=macbook+migration&pc=MOZI&form=MOZSBR
    After I did this, my computer went back to normal. Takes about a day. Good luck. It isn't easy and there are no short cuts I know of but better than having to find an Apple Store or shipping your Mac in for a repair.

  • Since upgrading to OS 8.0.2 my ipad2 freezes, slows down, safari takes forever to open, the celluar network goes to No Service and the only way to fix it is to reboot it and this takes longer than before.  Has Microsoft taken over Apple software?

    SInce upgrading to OS 8.0.2 my ipad 2 freezes, slows down, safari takes forever to open pages, cellular network goes to No Service requiring a reboot (and this takes longer than before), in summary, I now have a fancy paperweight, i used to love my ipad.  I feel as if Microsoft has taken charge of the Apple Software Division.

    Sorry if someone sees this post in a different thread; Just want to get some additional exposure.. Who knows, maybe someone from Apple will take note..
    The glitchy, unresponsive, slow and outright crashes are something you would expect in a less superior product.  I paid what I consider a premium because of the perceived integrity of the company and quality of their products. I am not going to go as far to say Apple ***** and so do their products; but they have to to a better job of acknowledging problems and providing recourse.  Right now, it "feels" like they don't care about existing customers.  I am not sure of the exact #'s, but I believe products like the Ipad2 represent a significant population of their existing Ipad product base.
    So what is my specific rant; If Apple is going to take a long time, or worst, NOT fix the problems introduced in IOS 8 for IPAD  2, give us the option of going back to IOS 7.  I would say most everyone was extremely happy with their product running under that OS and would migrate back in a heartbeat.  By blocking this option, it feels like Apple is saying that the only recourse is to live with crappy performance, wait forever without any real news, or throw away your Ipad 2 and buy a newer model.  Right now this is 100% completely unacceptable, and I, as will thousands of others, will watch how this unfolds when we do buy new products.  Most technology products only have short, finite lifespan and I would think it is at very least very important to Apple to retain customer base in a highly competitive marketplace.  I'm done...

  • Fehlermeldung auf Client - Server: Ein DCOM-Server konnte nicht gestartet werden: (73C9DFA0-750D-11E

    Fehlermeldung auf Client - Server: Ein DCOM-Server konnte nicht gestartet werden: (73C9DFA0-750D-11E1-B0C4-0800200C9A66), Fehler: "2"
    Aufgetreten beim Start dieses Befehls:
    C:\Windows\system32\macromed\Flash\FlashUtil31_11_8_800_94_ActiveX.exe - Embedding

    Kennt jemand das Problem?
    Nicht wirklich, aber empfindliche Server mögen keine schlechte Grammatik. *lol* Kleiner Scherz am Rande... Einzige Möglichkeit, die ich da sehe, wäre mit Processexplorer die Dateizugriffe zu überwachen. Die entscheidende Frage ist wirklich, ob überhaupt der Versuch stattfindet, die FDFs etc. überhaupt zu erzeugen oder ob nicht der Server einfach was blockt....
    Mylenium

  • Ich hatte ein problem mit meinem iPhone wo mir bisslang niemand weiterhelfen konnte und zwar war plötzlich ohne das ich egentetwas getan habe wurde der display schwarz doch das gerät war noch an ich konnte musik hören und apps öffnen ich habe auch die...

    helligkeit verstellt doch es blieb schwarz nur nach einem reboot war alles wie gehabt was war da los und muss ich mir sorgen machen?

    Erstens, wir allen Nutzern hier sind, so dass wir überhaupt nicht egal, ob dies Ihre letzte Apple-Produkt. Bedrohungen wie das nur machen Sie dumm aussehen.
    Zweitens ist die Garantie auf das iphone, und immer war, nur gültig im Land des Kaufs (die Europäische Union ist ein Land für Gewährleistung genannt). Apple interessieren sich gerade erweitert die warrany, macht es nicht die Garantie international.
    Sie haben nur sich selbst die Schuld, wenn Sie Ihr Handy gekauft in einem Land, wo man nicht leben. Es ist nicht Apples Schuld. Das nächste Mal, tun Sie Ihre Forschung.

  • Ihr Computer kann jetzt nicht ausgeschaltet werden, da gerade Software installiert wird.  Remote Desktop Client-Update, Safari und iTunes werden gerade installiert. Das Unterbrechen der Installation kann Ihren Computer beschädigen. Sie können ausschalten,

    MacBook Pro (2009)
    Mein Updatevorgang läuft seit 3 Tagen und lässt sich nicht abbrechen, obwohl es nicht weiter geht!
    Aktueller Update-Stand:
    "Ihr Computer kann jetzt nicht ausgeschaltet werden, da gerade Software installiert wird.
    Remote Desktop Client-Update, Safari und iTunes werden gerade installiert. Das Unterbrechen der Installation kann Ihren Computer beschädigen. Sie können ausschalten, sobald die Installation beendet ist."

    Ich habe das gleiche problem....ich hoffe auf eine schnelle loesung...

  • Die Nachricht konnte nicht übermittelt werden, weil das Postfach des Empfängers voll ist

    Hallo liebe Communitie,
    ich habe ein Problem ich kann keine Mails in meiner Icloud empfangen.
    Ich bekomme immer wieder die Fehlermeldung.
    Die Nachricht konnte nicht übermittelt werden, weil das Postfach des Empfängers voll ist.
                <nk11p03mm-mail03532a.mac.com (ims-ms-daemon) #4.2.2>
    Ich habe schon alle Mails in der Icloud gelöscht. Die Meldung kommt nach wie vor.
    Was mache ich falsch.
    Kann mir jemand helfen.
    Danke schon mal im vorraus.

    Hallo liebe Communitie,
    ich habe ein Problem ich kann keine Mails in meiner Icloud empfangen.
    Ich bekomme immer wieder die Fehlermeldung.
    Die Nachricht konnte nicht übermittelt werden, weil das Postfach des Empfängers voll ist.
                <nk11p03mm-mail03532a.mac.com (ims-ms-daemon) #4.2.2>
    Ich habe schon alle Mails in der Icloud gelöscht. Die Meldung kommt nach wie vor.
    Was mache ich falsch.
    Kann mir jemand helfen.
    Danke schon mal im vorraus.

Maybe you are looking for

  • The expression is not being displayed in the alert inbox

    Hi, I have created an expression in 'Long and Short Text' tab present in the ALRTCATDEF transaction screen. The expression is "test Error in message &SXMS_MSG_GUID&". However if i goto alert inbox, this expression is not getting displayed. I tried pu

  • Application identity multi-colum PK problem

    Hello, I am having problem with application identity in case of multi-colum PK when componente of OID class are themselve percistent classes. OrgUnitTypeRole class identified by OrgUnitType and Role which are both persistent classes. Attached are Org

  • Changing font size in e-mail

    Somehow I managed to accidently change the font size in my e-mail account.  The display of any of my folders is now so small as to be difficult to read at best.  How can I enlarge the font to a more readable size?

  • How to change the textarea to html editer in knowledge maintenance page ?

    Hi, experts, When we maintain the knowledge, we typed infomation into the textarea. Now we want to use html tags to show the knowledge info, so that the text can be shown in html table. how to change the textarea to  html editer ? Thanks. Oliver.

  • Keyword search across multiple folders

    Is it possible to do keyword searches across multiple folders and drives in Bridge CS3? On disk I have organised my images by geographical location, but want to keyword them and search for them by theme. This will cut across several drives each with