Data Association Between BPM Process Objects and EO,VO

Hi
I have an ADF screen where I am displaying values from database through EOs and VOs. My problem is after the user selects a value on the screen,I dont know how to map these selected values to BPM Process Data Objects.
Is there not a better way to achieving the below requirement.
"I have a dropdown on the screen.The value for the dropdown is being retrieved from a database table.After users selects a particular value from the dropdown, I have to map the value selected(including the rowset) to a BPM Data Object defined as a collection."
Please help.It is very urgent
Regards...

There are a few moving pieces to get the value of a field on a form changed when another field's value changes.
Look at the my blog on this from July using-database-driven-list-values-populate-bpm-variable (http://www.avioconsulting.com/blog/datwood/2012/07/02/using-database-driven-list-values-populate-bpm-variable). This goes into how to bind the BPM data object variables to a data source different than the default human task, set the autosubmit property, set the partitial trigger property and create the action binding you will need. Because you are not going to initialize your form with values when it first comes up, you just need to skip the "Initialize the ADF Form With Values Read from the Database" section.
Where I have you dragging over the "FirstName" and "LastName" name elements from the ADFbc data control, if you needed to populate BPM data object variables - you'd also need to drag these over into the form from the human task in the data control tab. Make the FirstName field autosubmit and then make your human task field have a partial trigger pointed to the FirstName field, then you'd be populating the BPM data object's element.
Know this is a lot to throw at you, but try getting the autosubmit working with the "listener" partial triggers and you should be able to get it going.
Dan

Similar Messages

I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.

I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.

Hi,
Regarding the issue here, please take a look at the below links to see if they could help:
Slow data transfer speed in Windows 7 or in Windows Server 2008 R2
And a blog here:
Windows Server 2012 slow network/SMB/CIFS problem
Hope this may help
Best regards
Michael
If you have any feedback on our support, please click
here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

What is the different between Oracle Process Manuf and Oracle Discrete Manufatur in oracle?

Dear What is the different between Oracle Process Manufacturing and Oracle Descret Manufacturing in Oracle?

Hi Elad,
Depending on the requirement and the availability we go with implementing a particular database.
For xi point of view there is no difference between oracle and SQL database. However you need to intall the drivers of SQL.
Even there is no difference in the communication channel configuration.
Reward points if found helpful.
Thanks & Regards,
Bharath.

Relation between Inventory Process keys and movement types

Dear All,
Is there any way to find the relation between Inventory process keys (which is in SBIW-> Settings for Application specific data sources(PI) -->Logistics -->Settings for IBU Retail / CP --> Transaction key maintenance for SAP BW) and movement types .
Thanks in advance...
Regards,
Raju

Hi,
Please read the note below.
Note 353042 - Howto: Activate transaction key (PROCESSKEY)
It has something for you ....
The process key (0PROCESSKEY and 0BWAPPLNM) of the InfoSources has not been filled. As a result, no key figures are updated because of the update routine of the participating InfoCube and along with it no records are inserted into the InfoCube. In each update routine, the system checks the content of the PROCESSKEY. If this field has no contents, then no data is written into the InfoCube because of the IF condition in the update rules.
Solution
So that you can work in the above mentioned InfoSources, you MUST activate the determination of the process key. This is done with the help of Transaction MCB_ which you can find in the OLTP IMG for BW (Transaction SBIW) in your attached R/3 source system.
Here you can choose your industry sector. 'Standard' and 'Consumer products' are for R/3 standard customers, whereas 'Retail' is intended for customers with R/3 Retail only.
You can display the characteristics of the process key (R/3 field BWVORG, BW field 0PROCESSKEY) by using Transaction MCB0.
If you have already set up historical data (for example for testing purposes) by using the setup transactions (Statistical Setup Programs) (for example: Purchasing: Tx OLI3BW, material movements: OLI1BW) into the provided setup tables (for example: MC02M_0SCLSETUP, MC03BF0SETUP), you unfortunately have to delete this data (Tx LBWG). After you have chosen the industry sector by using MCB_, perform the setup again, so that the system fills a valid transaction key for each data record generated. Then load this data into your connected BW by using 'Full update' or 'Initialization of the delta process'. Check, whether the system updates data into the involved InfoCubes now.
If all this is not successful, please see Note 315880, and set the application indicator 'BW' to active using Transaction 'BF11'.
Hope this helps.
Raj

Data discrapancy between queries in SAP and BW

Hi All,
I have a problem in data discrapancy between the queries in SAP R/3 and BW Queries .can any one please tell me how to investigate this kind of problems and how to fetch this data ,
please help me ASAP this is an urgent issue
and how many ways we can investigate this kind of issues ,please send me some steps .......
Thanks
Tom

Hi Tom,
You can proceed in a step by step fashion when trying to match the BW query data with that in R/3 reports.
. Try to check the filters and calculations applied in the BW query. You can create a very basic query if required.
. If this does not work then try using transaction LISTCUBE so that you can directly see the data in the InfoCube as per your chosen selections.
. If this doesn't yield anything, then look at the way data is being processed: Any code in the Start routines, Update or Transfer rules. Check them for correctness.
. If you loaded through the PSA, you can also check data in the PSA. Or you can also check the data extracted using RSA3 in the R/3 system.
. Try to provide us some more specifics about the data that you are trying to match. Which module is it? Which is the datasource?
Hope this helps...

Send async message between bpm processes takes long time

Hi all,
We use XI 3.0 SP16.
We have 2 BPM Processes.
One of these Processes sends an asynchronous message, which is directed
to the other (by the receiver determination defined in the directory).
In SXMB_MONI, we see that the "End Time" of the asynchronous send step
is about 3 seconds after the "Start Time".
Furthermore, when the first process sends this message to several other
processes, this time is longer, and gets up to 10 seconds for the
last "send" step in SXMB_MONI.
What can be the cause for this?
How can we minimize this time?
Thanks ahead for any help,
Yoav.

Hi Sravya,
Thanks for your answer.
The main process is similar to the Multicast pattern.
The other process(es) is an Async/Sync Bridge.
We use A/S Bridge for every receiver so that we can first send all requests asynchronously,
and only then handle responses as they arrive.
(Otherwise, a request is sent only after the former response arrives).
However, paradoxically, using A/S bridge makes the whole process take longer (for few receivers) due to the problem described.
Yoav.

Using PHP Data Services to create an object and accessing that objects data in an unbound way in AS

Hello,
I've been able to use the php data services and bind the results of a function to a component. However I am having a hard time figuring out the syntax to use the data services to create an object out of the results, and then use that object as an array of filenames to provide the current index of the filename to a new sound object.
My problem is obviously in not being able to figure out the specific syntax, I have declared the service and and object of the services returned type and in the creationComplete() function I have assigned object.token = service.getData();
I've tried various ways of then pulling that data out of the object, with no success.
Can someone point me in the right direction?
This code probably looks horrible because it doesn't work yet.
- Joel
            import flash.media.Sound;
            import flash.media.SoundChannel;
            import mx.controls.Alert;
            var playing:Sound = new Sound();
            var channel:SoundChannel = new SoundChannel();
            var sndIndex:int=0;
            var skpTr:String;
            public function init():void{
             mp3Array.token = mp3service.getData();
             currentTrack(mp3Array.lastResult.filename);
                 trace(mp3Array.lastResult.filename[sndIndex]);
            public function currentTrack(t:String):void{
                playing = new Sound();
                playing.load(new URLRequest("mp3/" +t));
            public function skip():void{
                stop();
                if (sndIndex != mp3Array.lastResult.length-1){
                    sndIndex++;
                    var skipTr:String=mp3Array.lastResult.filename[sndIndex].data;
                    currentTrack(skipTr);
                    play();
                } else {
                    sndIndex=0;
                    skipTr=mp3Array.lastResult.filename[sndIndex].data;
                    currentTrack(skipTr);
                    play();
            public function stop():void{
                channel.stop();
            public function play():void{
                channel = playing.play();
    <fx:Declarations>
        <s:CallResponder id="mp3Array"/>
        <mp3services:Mp3Service id="mp3service" fault="Alert.show(event.fault.faultString + '\n' + event.fault.faultDetail)" showBusyCursor="true"/>
        
    </fx:Declarations>

Hello Joel;
In retrieving your data - what is your php returning to FB, an object, object array, an array? Either way, I have a brief example below that an object(s) is being returned. Pull the data from the lastResult in a ResultEvent. The object instantiated in the resultEvent will contain your data and you can do what you want from there.
Also, I always use Network Monitor to see what data (if any) is being returned from the server, you can also see how it is being sent back.
John
private function init():void
     mp3Array.token = mp3service.getData();
     mp3Array.addEventListener(FaultEvent.FAULT, faultHandler);
     mp3Array.addEventListener(ResultEvent.RESULT, mp3Array_resultHandler);
protected function faultHandler(event:FaultEvent):void
     Alert.show("There was a fault error!" + event.message, "Fault Error", Alert.OK);
protected function mp3Array_resultHandler(event:ResultEvent):void
     // Not sure if your service is sending back an object or an array or ?
    var info:Object = mp3Array.lastResult;
     doSomeFunction(info)
protected function doSomeFunction(data:Object):void
     trace(info.filename);

Diff. between business process masterlist and business process procedurelis

hello gurus,
pls tell me the main difference between business process master list and business process procedure list
so please help me in this matter.
regards,
muralidhar.t

hi,
Business process procdures ( normally called as BPP) are one which explain users how to perform a transaction or a series of transaction for carry out a business acitvity ( Like creating a PR, converting PR and releasing it).
Business procedure Master list ( called BPML ) is done in the begining of the project to define the scope and cover all the processes that the project will be covering . You will track all the deliverables on the project based on the BPML ( It will contain process and sub process descriptions )
Example : Order to cash --> Book order, Acknowledge order, Amend order, Ship , Bill, returns etc..)
Hope this should give you an idea. For details refer to implementation methodlogies ( like ASAP) .
cheers
Rav

Association between the compound document and individual assets

Hi
If I create a AI document in illustrator and in that document I have placed diffent type of files say one jpeg, one gif and one text file.
Now if we will see the links panel, we can see the links associated between the compund AI document with individual placed files.
How we can get the links through code.
In InDesign ILinkManager was there who was giving info abut all these.
How to acieve this in Illustrator. which suites we need to refer. Please help.
Thanks

the return value is 0.
will the below code work?
result = sAILayer->CountLayers(&count);
for (long i = 0; i < count /*&& iterBegin != iterEnd*/; i++/*, ++iterBegin*/)
AILayerHandle lyr = NULL;
result = sAILayer->GetNthLayer(i, &lyr);
if (lyr)
   result = sAIArtSet->LayerArtSet(layer, fArtSet);
result = sAIArtSet->CountArtSet(fArtSet,&artCount);
for (long j=0; j < artCount; j++)
    ai::UnicodeString name;
    AIUIDRef artUID;
    ASBoolean boolname;
    result = sAIArtSet->IndexArtSet(fArtSet, j, &artHandle);
    sAIArt->GetArtName(artHandle,name,&boolname);
    sAIUIDUtils->GetArtUID(artHandle,true,&artUID);
If there is some other way of achieving by using art set please help me.

Date - difference between JDK1.3.1 and 1.4.2 ???

I tried running this piece of code on JDK1.3.1_08 and JDK1.4.2 - and the output i different! Why???
import java.util.Date;
import java.util.TimeZone;
public class Test {
     public static void main(String[] args) {
          long longDate = Long.parseLong("-883620000000");
          Date date = new Date(longDate);
          TimeZone zone = TimeZone.getDefault();
          System.out.println("Zone : " + zone.getID());
          System.out.println("Date value : " + date.getTime());
          System.out.println("Date string: " + date.toString());
Output with JDK1.3.1_08:
Zone : Europe/Berlin
Date value : -883620000000
Date string: Wed Dec 31 23:00:00 CET 1941
Output with JDK1.4.2
Zone : Europe/Berlin
Date value : -883620000000
Date string: Thu Jan 01 00:00:00 CEST 1942
This is pretty troublesome while my Swing Client is running on 1.4+ and the appserver on 1.3.1.

It looks more like a timezone difference between the
two. SDK 1.4 supports a much larger set of timezones than earlier versions of the language, and it looks like they are more historically correct too. No doubt there were changes in the daylight saving rules in Germany between 1941 and 1970 (you'll recall there were a lot of things going on back then), and my guess is that 1.4 is more likely to be correct.
As limeybrit9 suggests, you may want to set a specific timezone to make your applications consistent.

Data transfer between OSX 10.9 and WIN 7 stops

Hello,
Unfortunately, I have a problem with the data sharing through SMB.
I can connect easily to my Mac and see shared folders or data. But in attempting to copy files from Mac to Win 7 PC there is an error. The data transfer is terminated after a while. The file used in the test is an MKV with the size of 1.34 GB.
The Mac is accessed from a Win 7 PC with administrator privileges. The systems are connected via Wi-Fi 802.11 n.
The exchange of data between OSX in use of SMB or AFP works without any problems.
Maybe someone has a solution or a tip for me.
regards

Hi ip0wn,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Please click on the link for more details and troubleshooting steps:
Mac OS X: How to connect to Windows File Sharing (SMB)
http://support.apple.com/kb/HT1568
Cheers,
- Judy

Changes between a RAC(Objects) and NON RAC

Hi all,
I want to findout what all the different things to be considered when an application is made to run on RAC env.
For eg: I found there is a difference between the way the Sequences are used in a RAC env from Non RAC.
Are there any guidelines for the Objects used in RAC?
Also can you point me to any doc related to tuning the interconnect as we are identifying wait events related to cluster "Cluster was consuming significant database time"
Thanks.

Hi hyddba,
Absolutely, at database level for application has no changes at objects.
At application code has changes to benefit aplications from failover TAF and FAN events.
http://www.oracle.com/pls/db102/to_toc?pathname=rac.102%2Fb28759%2Ftoc.htm&remark=portal+%28Getting+Started%29
Regards,
Rodrigo Mufalani
http://mufalani.blogspot.com

All data lost between 13/11/07 and 17/07/08

When i rebooted my iMac this morning, all my data (emails, received faxes in Pagesender,…) are gone !!
Is there a way to recover and what can be the reason ?
thanks,

Is there a way to recover and what can be the reason ?
You might be able to use a data recovery utility for any data which was stored on your machine. IMAP e-mail though is stored on the internet service provider. .Mac/MobileMe e-mail is also IMAP, so it too might be making a disappearing act due to the MobileMe migration:
http://www.apple.com/mobileme/status/
Otherwise if you aren't using .Mac/MobileMe, and are using IMAP, you can ask your internet service provider to attempt to recover e-mails from their tapes for the last several months.
Recovery utilities for the Mac can recover to an empty Firewire hard drive at least as big as the internal hard drive. They include Prosoft Data Rescue, Subrosasoft Filesalvage, and Boomerang's Boomerang. If none of these can recover that data, and it was on your machine, you may need to seek the services of a data recovery specialist such as http://www.drivesavers.com/
Hard drives fail, and you should always have a backup plan*:
http://www.macmaps.com/backup.html
Once backed up, and/or recovered to the best of your ability, you can explore one more reason for data being missing, and that's directory damage. But since hard drives failing can have the same symptoms we wouldn't want to make your damage worse by running a directory repair utility on your machine without your data backed up. Let us know once you are recovered? Then we can check and see if directory damage is to blame.
- * Links to my pages may give me compensation.

What is the difference between signal processing tooklit and the advanced signal processing tooklit

Hi
I am work on a project with Labview 7.1 now and want to calculate the FFT based on
the Welch method. In my full version Labview, there is a signal processing tooklit
I install it but did not found that welch.vi. Is it means that except for signal processing
tooklit, there is another advanced one and I should pay more money for it, Or,
Should I update my Labview version to 8.0 and the software will support the tooklit?
Thanks a lot!

Hi dec04009 ,
When you say "Signal Processing toolkit", do you mean the Signal Processing Palette, that is included in LabVIEW Full?
LabVIEW has signal processing VI's, those are supported in later versions, like 8.0 or 8.2. Since LabVIEW 8.0 there were added many new mathematical functions. Take a look at this:
http://zone.ni.com/devzone/conceptd.nsf/webmain/bf49f9b8951a89f3862571840057b2c7
The Advanced Signal Processing Toolkit, has advanced features, like wavelets analysis, JTFA
http://sine.ni.com/nips/cds/view/p/lang/es/nid/1395
I'm not familiar with the Welch Method, but I found this in the functions of the LabVIEW 8.2:
http://zone.ni.com/reference/en-XX/help/371361B-01/lvanls/welch/
Hope this help.
Tania Lozoya

Break association between original object and transformation copies?

Hi,
After I had created an array of duplicates for the original drawing object, I found that once the original object is modified, all its copies are changed automatically afterwards.
Is it possible to break the association between the original object and is transformation copies, so that subsequent editing can be made on each individual copy?
Bob

Modify>Separate Attributes. This will give you the objects as a group. The Transform Effect is no longer in effect.
Judy Arndt

Data Association Between BPM Process Objects and EO,VO

Similar Messages

Maybe you are looking for