Data Corrupted when using CREATE AS SELECT * FROM over DB LINK

Hi ,
I wonder if anyone has suffered a simillar issue as this:
I have a DB Link Between a 10gR1 (Base install not patched) database on Windows 2003, and a 10gR2 (with latest Patch Database ) on Sun Solaris. The 10.1 DB is the SOURCE 10.2 is TARGET
When using a statement like the following on the Target :
CREATE TABLE a AS SELECT * FROM TABLE a@SOURCE
The statement completes, however for some (not all) tables, the data content is seriously corrupted, I noticed this when trying to apply a UKey on the newly created table in TARGET. The data was completely messed up for around 600 out of 450000 rows, I could not easily tell which rows were messed up as it was the columns that build the UKey that were affected :-(
The same happens if I precreate the table and use INSERT /*+APPEND*/ INTO AS SELECT.... etc
I realise that using an unpatched 10.1 is not nessasarily advisable, however currently it is difficult for us to patch or upgrade the DB...
If anyone has seen this before an/or has any ideas what might be the cause , I would appreciate any help I can get.
Cheers
JAmes

The Problem Manifest itsself in that some fileds are created with incorrect Values, specificaly in easy to identify cases NULL where the original values where not NULL.
These field do not contain special chars like ä or ß , so it does not seem to indicate a charset issue.
JAmes

Similar Messages

Why select data from Function directly (SE37) got data , but when use funct

why select data from Function directly (SE37) got data , but when use function in program donot found data
i use function
CS_BOM_EXPL_MAT_V2
when i run function directly at SE37 .
i found data.
but when i use same function in program .
system not found.
please see my attachment.
help me please.
[http://www.quickfilepost.com/download.do?get=c974356a498b3a4d369aa0c50622e50b]
http://www.quickfilepost.com/download.do?get=c974356a498b3a4d369aa0c50622e50b

I know why U get empty data.
In Program U should follow the rules:
U'd better data a variant typed the function parameters's type.
for example:
in your program the parameter: stlal = '1'
U'd better like follow:
Data l_stlal type STKO-STLAL
l_stlal = '01'. *Attention: '1' <> '01'.
stlal = l_stlal.
in this way U may have less mistake
and the parameter MTNRV
U should use material convernt : "CONVERSION_EXIT_MATN1_INPUT" to change material into internal types before U put into function's parameter.
why se37 has no problem? because In se37, the data you filled was be processed before use

Why do i get 2 curves and not just 1 when i create a diagram from a row of data in a table ?

Why do I get 2 curves and not just i when I create a diagram from a row af data in a table ?

Erik,
Thank you for giving me the points. Generally you wait to award points until your problem is solved. It is totally your at your descretion.
OK.
This is still not clear. To post a screenshot get the "stuff" you want to show in view on your screen, then type the key combination <Command>+<Shift>+3. The cursor will change to a crosshair. Click and hold on the top-left corner, then drag to enclose what you want to show (to the bottom-right corner), then release. The screenshot will appear on your desktop and will be named something like "".
Now click the camera icon in the tool bar for this forum:
, click the text box to allow you to navigate to, and select your screenshot.
Here is what you sent me:
The graph does not seem to be associated with the table of data you are showing. Generally when you highlight a graph the corresponding table will highlight and show the source of each of the series in the graph (dark and light blue).
This is what I would expect to see when highlighting a graph:
Right now I think there is ANOTHER table arround that is the source for the graph and the table you show is "just another table". You can move your data into the table the graph refers to by copy and paste, or simply typing the values. You can change how many series there are by grabbing the little circle at the bottom right of the highlighted cells (when you have the graph highlighted) and dragging as shown:
The Numbers Users' Guide is a great resource you should utilize and can be found here:
http://support.apple.com/manuals#macosandsoftware
The chapter on graphing (or charting) is 7 and starts on page 134.

How to avoid data repetation when using select statements with innerjoin

how to avoid data repetation when using select statements with innerjoin.
thanks in advance,
satheesh

you can use a query like this...
SELECT DISTINCT
         frg~prc_group1                  "Product Group 1
         frg~prc_group2                  "Product Group 2
         frg~prc_group3                  "Product Group 3
         frg~prc_group4                  "Product Group 4
         frg~prc_group5                  "Product Group 5
         prc~product_id                  "Product ID
         txt~short_text                  "Product Description
UP TO 10 ROWS
INTO TABLE l_i_data
FROM
Joining CRMM_PR_SALESG and
COMM_PR_FRG_ROD
crmm_pr_salesg AS frg
INNER JOIN comm_pr_frg_rod AS prd
ON frgfrg_guid = prdfragment_guid
Joining COMM_PRODUCT and
COMM_PR_FRG_ROD
INNER JOIN comm_product AS prc
ON prdproduct_guid = prcproduct_guid
Joining COMM_PRSHTEXT and
COMM_PR_FRG_ROD
INNER JOIN comm_prshtext AS txt
ON prdproduct_guid = txtproduct_guid
WHERE frg~prc_group1 IN r_zprc_group1
   AND frg~prc_group2 IN r_zprc_group2
   AND frg~prc_group3 IN r_zprc_group3
   AND frg~prc_group4 IN r_zprc_group4
   AND frg~prc_group5 IN r_zprc_group5.
reward it it helps
Edited by: Apan Kumar Motilal on Jun 24, 2008 1:57 PM

It used to be that when I created a pdf from a word or publisher document, hyperlinks worked fine. Now I cannot get them to work unless the text displayed for the link is the complete address and it all appears on one line. Why?

it used to be that when I created a pdf from a word or publisher document, hyperlinks worked fine. Now I cannot get them to work unless the text displayed for the link is the complete address and it all appears on one line. Why?

You can print to the Adobe PDF printer, but that only creates links that Acrobat or Reader recognize as such. That is the reason for needing the entire URL on one line. It is not actually an embedded link, but one created by Acrobat on the fly. With OFFICE 2013 you have two choices: 1. create the PDF with the print to Adobe PDF and then add the links in Acrobat so that they are complete or 2. I think the WORD save as PDF or XPS will create the PDF with links, but not sure. If so, that would be the quickest solution for you, but be aware of potential problems with the MS plugin.
Of course, the third option is to upgrade to XI which can be done with AA 9. You will probably not be eligible for a for an upgrade to whatever the next version will be.

Display a message when an item is selected from a dropdownlist

Hi,
I need to display a message(kind of alert message) when certain items are selected from the dropdownlist.
Let me know what is a good way to do this in web elements?
Thanks

hello,
unfortunately there is no validation / alerting for select menus in webelements.
however...if you're feeling ambitious and or this is a definite requirement for your project...custom functions are open source so you could write an on change javascript function within the WESelect custom function that will find the new value and compare it against your certain items array of values.
out of curiosity, what is your project's particular need to have an alert for a select menu based on what the end user selects? if this comes up more often or there's a good use case perhaps this could be built into a future version.
jw

Adobe Acrobat V9 Professional crashes or causes PDFs to be corrupted when using Dragon software

Adobe Acrobat V9 Professional crashes or causes PDFs to be corrupted when using Dragon software. I use Nuance Dragon NaturallySpeaking 11.5 to assist me when I add comments to a PDF. I also use it when making additions or changes to text. When I use the two software programs together, Acrobat constantly crashes. If it doesn't crash, an error occurs trying to save the file. I entered 988 comments into a 158-pg PDF, only to find the file was corrupted and couldn't be printed. I also could not see the list of comments (click Show Comments).
These problems do not occur if I don't use both products simultaneously.

Never overwrite a clip that is used in Pr. Give the
modified/corrected/updated clip a new name and import that into your Pr
project. Then Alt+Drag the new clip on top of the old clip in the
timeline to replace the clip instance.
If import-then-drag isn't your style, then right-clicking the original
clip in the Project panel and selecting Replace Footage will accomplish
the same thing.
This important rule applies in Encore as well.
-Jeff

PL/SQL: ORA-22992: cannot use LOB locators selected from remote tables

Dear ALL,
My O/S is Redhatlinux 5.2 and i had Migrated my Oracle databse to 11g2. But after that while i am retrieving records through dblinks from one of my other Oracle 9.2.0.8 databse it's throwing the error : PL/SQL: ORA-22992: cannot use LOB locators selected from remote tables.* This error i am getting in TOAD as well as SQL Developer.
Can anybody tell me how to fix this error ? Because am not able to get the records.
Also am getting another error during retrieving data from some of my tables after migrating i.e the table which having CLOB data type while am accessing to retrieve the records using select query it's throwing the error :
+(The following error has occurred:+
A query with LOB's requires OCI8 mode, but OCI7 mode is used.)
If anyone having any idea kindly share.
Thanks and Regards
Biswa

Hi,
Ya what u sent that is fine. But already am using one procudure which is accessing LOB data from another databse through DBlink and working fine. But there Both the databse are 9.2.0.8.
But while am executing the same procedure in oracle 11g where the Dblink accessing the data from Oracle 9i , there am getting this error.
Kindly tell if u know any resolution.
Thanks

Errors (-50) occured when i was using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in my iTunes application on my computer.

errors (-50) occured when i was using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in my iTunes application on my computer.
what is it?

Quoted from the link I provided you with, in your other post.
These alerts occur due to timeouts or conflicts trying to write a file during download.
If you encounter this issue while accessing iTunes Store:
See iTunes 9: "One Moment Please" or "Error (-50)" message when accessing iTunes Store
If you encounter this issue while while downloading something from the iTunes Store:
Delete your iTunes Downloads folder, located in:
Mac OS X:  ~/Music/iTunes/iTunes Media/Downloads Note: "iTunes Media" may appear as "iTunes Music. Also, the tilde (~) refers to your Home directory.
Windows Vista:  \Users\username\Music\iTunes\iTunes Media\Downloads\
Windows 7:  \Users\username\My Music\iTunes\iTunes Media\Downloads\
Windows XP:  \Documents and Settings\username\My Documents\My Music\iTunes\iTunes Media\Downloads\
After locating your iTunes Downloads folder:
Quit iTunes.
Delete the Downloads folder on your computer.
Open iTunes.
Choose Store > Check for Available Downloads.
Enter your account name and password.
If you encounter this issue while while downloading Digital Copies using Windows:
Use MSCONFIG (directions for Windows XP and Windows Vista/Windows 7) to disable conflicting software.
If using MSCONFIG steps resolves the issue, you may want to use the System Configuration Utility to turn on the third-party System Services and Startup Items one at a time (restarting your computer after turning on the item or items) to identify which System Service or Startup Item is causing the conflict.
You can turn all of them back on by selecting the Normal Startup option under the General tab of the System Configuration Utility window, but please note that this may cause the issue to reoccur.
If you are able to isolate the issue to a particular third-party software, you may wish to contact them to let them know of the conflict.

How to totally turn off data traffic when using ma...

Nokia N8-00:
I only use the integrated gps and have turned off the assisted gps, net based gps and Wi-Fi/Network but when accessing maps it still generates data traffic.
Normally this is´nt a problem but when traveling abroad data traffic costs a small fortune.
In my old N95 when I downloaded offline maps and turned everything but integrated gps off there was no data traffic at all but even after the latest maps updates (i.e. yesterday) it appears that the maps still needs downloading when accessed...
Any suggestions how to completely avoid data traffic when using maps?

Set all destinations to always ask and select no whenever the phone gives you a request, set Maps to offline, and set location to just use intergrated GPS. By the way, just been to Portugal using Vodafone and data charges only about £5 for week, and they've just improved allowances, may be worth checking your service providers web site and see if it's necessary to bother about data roaming, they all tend to follow each other, and Data roaming charges in europe seem to be coming down !
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Can we set the dynamic data source when using getReportParameters() ?

Hello!
I have a report where one of its parameters refers to a list of values (LOVs). This list of values is an SQL Query type. When the data source used in the report is defined in the BI Publisher server, I'm able to get the report parameters using the getReportParameters() function in my application. However, if the data source is not defined the function throws an exception, which is understandable.
I decided to dynamically set the data source so that even if the data source used by the report is not defined in the BI Publisher server, it still will be able to get the LOVs for the parameter. I tried setting the JDBCDataSource of the dynamicDataSource for the ReportRequest object that I passed to the getReportParameters() function. Please see the sample code below:
reportRequest.dynamicDataSource = new BIP10.BIPDataSource();
reportRequest.dynamicDataSource.JDBCDataSource = new BIP10.JDBCDataSource();
setReportDataSource(reportRequest.dynamicDataSource.JDBCDataSource, connectstr, jdbc, dc); //function to set the values for JDBCDataSource object
reportParams = webrs.getReportParameters(reportRequest, uid, pwd); //call the getReportParameters
I was expecting this to work as this is what I did to dynamically set the data source before calling the runReport function. So, my question is -- can we set the dynamic data source when using getReportParameters() ? I tried this both in versions 10g and 11g. It does not seem to work on both versions.
Regards,
Stephanie

report_id column of apex_application_page_ir_rpt can help us uniquely identify each saved report.
We can assign this report_id value to a page item and this page item can be put in the Report ID Item text box of the Advanced section of the Report Attributes page of the IR.
This should load the saved report identified by report_id and you can get rid of javascript
Regards,
Vishal
http://obiee-oracledb.blogspot.com
http://www.packtpub.com/oracle-apex-4-2-reporting/book
Kindly mark the reply as helpful/correct if it solves your problem

How do you create bookmarks when you create a PDF from word?

Hi All, how do you create bookmarks when you create a PDF from word, rather than having to individually copy from a pdf and create bookmarks?
Adobe 8.1 full version.

Thanks for the reply, I'll give it a go and will let you know

Photoshop 12.1 corruption when using gaussian blur

Is there a fix for the Photoshop 12.1 corruption when using gaussian blur

It's not a crash per se... when using the gassian blur filer at some but not all times the file will becomse corrupted.. it comes up with large flat panels of color. After that point asnything done to the file is destroyed. You have to go back to the last saved versioin of the file. There are many notes on the web about this issue.. It has been occuring since I started with 12.1 about a year ago. Never occurred on other PS apps.
You have to quite the app and re-launch. Then it works. There is no crash report to make.

When I used to move my cursor over a link, it would display the address, that disappeared, how do I get it back on?

When I used to move the cursor over a link, it would display the address of the link in the lower left hand corner before I clicked on it. This has disappeared, how do I turn it back on?
== This happened ==
Not sure how often
== A few months ago

View > Statusbar

Table structure changes when using 'create table X as ( select * from X@remote_server )'

I need to create and copy data from a remote Oracle server to a local server. The command I use is
create table X as ( select * from X@remote_server )
with remote_server is the tns name of the remote Oracle server.
The local table is created and populated with data as expected but when I check the structure using 'desc X' it shows me all the CHAR fields of the local table are triple as large as of the remote table.
I guess the problem is the difference between the NLS_CHARACTERSET settings . The local charset is AL32UTF8 and the remote is WE8MSWIN1252.
How do I change the command to make the two tables have the same field sizes ?
Thanks,
Vu

Do you want to be able to store all the data from the remote table in the local table? Assuming you do, increasing the size of the column would be the correct behavior.
By default, a VARCHAR2(10) allocates up to 10 bytes of storage. In the Windows-1252 character set on the source, 1 character requires 1 byte of storage. So a VARCHAR2(10) has space for up to 10 characters. In the UTF-8 character set on the destination, however, 1 character can require up to 3 bytes of storage. So a VARCHAR2(10) may allow you to store as few as 3 characters. Since Oracle has no way of knowing what data you have (and will have) in the source system, it triples the size to ensure that all the data from the remote system will fit in the new table. If you want the columns to be the same size on the destination that they are on the source, it is highly probable that you'll get errors inserting the data because at least one value will be too large for the destination column.
Justin

Data Corrupted when using CREATE AS SELECT * FROM over DB LINK

Similar Messages

Maybe you are looking for