Data domain with auto-idle mode doesn't wake up

Hello,
I have a strange problem with my data domains. I have enabled auto-idle mode with a sleep time of 1 minute. After 1 minute my data domain goes to sleep but the strange thing is that it doesn't wake up when I run a graph. The data domain does start when I query the data domain in Studio.
Is there something that I have to configure in Integrator ETL?
Thanks!
Marco Snels

Hi Marco,
Please see "How idling affects data domain behavior".
Specifically, the info I quote below:
The following statements describe which operations activate (or do not activate) an idle data domain:
Queries from the Conversation Web Service, Configuration Web Service, and Data Ingest Web Service activate an idle data domain and restart the timeout timer.
Queries from Administration and Configuration URL commands also activate and restart the Dgraph processes for the idle data domain (and restart the timer), with the exception ofhttp://<host>:<port>/endeca-server/admin/<data_domain>?op=ping, which does not activate an idle data domain.
Bulk load interaction. The process of loading data through the Bulk Ingest interface starts with theallocateBulkLoadPortoperation from the Manage Web Service, which activates an idle data domain. If a bulk ingest operation is issued and is in progress for the data domain that is set to auto-idle, it is possible that bulk load may take longer than the idling timeout. If the timeout expires while bulk data load is in progress, the Endeca Server refreshes the idling timeout and the data domain does not shut down, so that bulk load can complete successfully.
Theendeca-cmdcommands do not activate an idle data domain with the exception ofendeca-cmd allocate-bulk-load-port, which activates an idle data domain.
When you run a graph, does it issue a Data Ingest Request? If yes, it should get activated.
antoher option is to play with resetting an idle timeout to 10 minutes or more -- if any of the queries (ingest or regular search queries), are longer-running, having an idle timeout that is 10 minutes stabilizes the idling behavior.
Julia

Similar Messages

How to delete multiple data domains with single step ?

how to delete multiple data domains with single step ?

You can go to your Endeca-Server domain home e.g.($WEBLOGIC-HOME$/user_projects/domains/endeca_server_domain/EndecaServer/bin)
run
[HOST]$ ./endeca-cmd.sh list-dd
default is enabled.
GettingStarted is enabled.
endeca is enabled.
BikeStoreTest is enabled.
create a new file from the output just with the domains that you want to delete and then create a loop
[HOST]$ vi delete-dd.list
default
GettingStarted
endeca
BikeStoreTest
[HOST]$ for i in $(cat delete-dd.list); do; ./endeca-cmd.sh delete-dd $i; done
Remember that this can not be undone, unless you have a backup.

Date picker with auto today's date

Hey,
I'm sure this has been asked and answered, but I couldn't find it in the search. I have a date/time field which is excellent for using the date picker to insert any date. But more often than not the form will use the current days date. Is it possible to have the Date/Time Field default to the date of the day the form was opened and STILL have the option of overwriting it with the picker?
Thanks.

Try placing the below line of code in either of the Initialize/ Form Ready/ Layout Ready events..
$.rawValue = Num2Date(Date(),"MM/DD/YYYY");
Language is FormCalc..
Thanks
Srini

Problem with auto sleep mode

My Mac Pro doesen't go anymore in the sleep mode. I made the settings in system preference about 10minutes altough the system don't go in the sleep mode anymore. In the past it worked well...
Does anybody know what could be the problem?

My Mac Pro and MacBook Pro have the same problem. You can read about it here:
http://discussions.apple.com/message.jspa?messageID=8552064#8552064
The problem hasn't been solved.

Resetting maxbytes in data files with auto extend on

my system datafile crossed max size
one temp file reached max size.
need to reset the maxbytes column i think i need to execute like below
alter database datafile X autoextend off;
alter database datafile X autoextend on maxbytes <new value>;
Am i correct ?

Raman wrote:
my system datafile crossed max sizeThis shows that your system datafile is with autoextend off?
one temp file reached max size.
need to reset the maxbytes column i think i need to execute like below
alter database datafile X autoextend off;
alter database datafile X autoextend on maxbytes <new value>;
You can just use the second command to change your maxbytes. No neet to make autoextend off for this.
Am i correct ?Regards
Anurag

HT4628 My iMac loses its connection with my home wi-fi network when it goes into "idle" mode. That is, if I don't use the Mac for a few minutes, it goes to idle, kind of like sleep. The wi-fi connection disappears and the clock upper right stops working.

I think it's a Lion problem. I had this problem with an old Dell True Mobile wireless router, and hoped it would go away with a new Airport Express router. Same problem. I checked online and saw a lot of message boards featuring questions from people that suffered the interruption of their wi-fi connection, some with Macbooks others with iMacs like me. The problem happens when I don't use the computer for a few minutes. It goes into the Idle mode, kind of like sleep. The connection is severed and the time clock upper right stops. It's weird. There was supposedly an Apple update that addressed this issue, so at the Genius bar two days ago I updated to 10.7.3, downloaded and installed the update. Didn't work. Is it Lion? Is it a wireless card issue? Very frustrating. I subitted a genius bar work authorization with another Apple Genius Bar support tech the next day. He ran some tests. Cryptically said he knew that Apple knew about this and was working on a solution but couldn't tell me what it was. Submitted my info and said I'd be contacted by an Apple tech within 48 hours and provided with a link to another download of another update that should "fix" the problem. I don't know what to do.

I FINALLY SOLVED THIS ISSUE!!!!
New routers have "mixed" modes for your network; this means that it will automatically choose the best option between wireless-B, wireless-G and wireless-N network modes. I used to experience this issue using the 2.4 GHz. mixed mode wireless network.
Thankfully, my router can create 2 networks: a 2.4 GHz. network and a 5 GHz. network.
When I randomly changed this value to "use only wireless-B and wireless-G" trying to fix an issue with a wi-fi expander, the iMac wi-fi issue dissapeared! I tried it with wireless-N only, but it didn't work.
So, finally, I have a 2.4 GHz network with only wireless-B and wireless-G modes which works PERFECT with the iMac, and a 5 GHz. network with a mixed* wireless mode for everything else mode.
*PD: by "mixed" mode it means that the router will automatically choose between B, G and N network modes as it fits better.

How to set wireless printer at ad Hoc mode in CP1025nw with auto-off is off?? ie never auto-off!!

How to set wireless printer at ad Hoc mode in CP1025nw with auto-off is off?? ie never auto-off!!
Thank you very much for your help if any!!
This question was solved.
View Solution.

Quite a few questions there, Sends, but I will do what I can to answer them.
I would first recommend buying a router, even if it is one that you won't connect to the internet and network this with your other PCs and the printer. This will give you the best functionality and results for what you are attempting to do.
Additionally, the Auto Off feature of the printer can be disabled, and is not affected by the connection type. You can usually go through the Setup Menu and select Tools to change the options there on the energy saving features.
Lastly, the auto off feature on your computer is a Windows question, but an easy one to answer. If you are on a laptop you can right-click on the battery in the service tray (bottom right hand corner) and change the energy conservation settings.
You might be better off installing the printer through the USB cord and alternating that based on when you are using it, but that would be optimal only if you are printing only a few documents on an irregular basis. A networked connection is the easiest to manage over several computers, honesty, but you do have some requirements for that connection and limitations as well.
I hope this information is useful!

CSD Load Data Full completing with Could not find server for data domain Error

Hi,
We have installed the Oracle Ebusiness suite extension with Endeca following the Oracle Support note : 1562372.1.
We found that the CSD Load Data Full completing with below error :
Element [ENDECA_MERGE_RECORDS0:Bulk Add/Replace Records]-Component pre-execute initialization failed.
        at org.jetel.graph.Node.run(Node.java:446)
        at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)
        at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
        at java.lang.Thread.run(Thread.java:722)
Caused by: Failed with the following exception:
        java.rmi.RemoteException: Could not find server for data domain Error connecting to the Endeca Server. If applicable, ensure your SSL settings are correct; nested exception is:
        org.apache.axis2.AxisFault: Could not find server for data domain
        at com.endeca.clover.adapters.BaseAdapter.preExecute(BaseAdapter.java:155)
        at org.jetel.graph.Node.run(Node.java:444)
        ... 3 more
Caused by: java.rmi.RemoteException: Could not find server for data domain Error connecting to the Endeca Server. If applicable, ensure your SSL settings are correct; nested exception is:
        org.apache.axis2.AxisFault: Could not find server for data domain
        at com.endeca.clover.adapters.DIWSConsumer.initIngestStub(DIWSConsumer.java:99)
        at com.endeca.clover.adapters.DIWSConsumer.<init>(DIWSConsumer.java:45)
        at com.endeca.clover.adapters.merge.MergeRecordsConsumer.<init>(MergeRecordsConsumer.java:51)
        at com.endeca.clover.adapters.merge.UpsertRecordsConsumer.<init>(UpsertRecordsConsumer.java:36)
        at com.endeca.clover.adapters.merge.MergeRecordsAdapter.getConsumer(MergeRecordsAdapter.java:110)
        at com.endeca.clover.adapters.DIWSAdapter.createConsumerThreads(DIWSAdapter.java:56)
        at com.endeca.clover.adapters.BaseAdapter.preExecute(BaseAdapter.java:146)
        ... 4 more
Caused by: org.apache.axis2.AxisFault: Could not find server for data domain
        at org.apache.axis2.util.Utils.getInboundFaultFromMessageContext(Utils.java:446)
        at org.apache.axis2.description.OutInAxisOperationClient.handleResponse(OutInAxisOperation.java:371)
        at org.apache.axis2.description.OutInAxisOperationClient.send(OutInAxisOperation.java:417)
        at org.apache.axis2.description.OutInAxisOperationClient.executeImpl(OutInAxisOperation.java:229)
        at org.apache.axis2.client.OperationClient.execute(OperationClient.java:165)
        at com.endeca.dataingest.axis2.ingest.IngestStub.ingestChanges(IngestStub.java:791)
        at com.endeca.clover.adapters.DIWSConsumer.initIngestStub(DIWSConsumer.java:88)
        ... 10 more
Kindly request your help in resolving this error.

Hi,
We have installed the Oracle Ebusiness suite extension with Endeca following the Oracle Support note : 1562372.1.
We found that the CSD Load Data Full completing with below error :
Element [ENDECA_MERGE_RECORDS0:Bulk Add/Replace Records]-Component pre-execute initialization failed.
        at org.jetel.graph.Node.run(Node.java:446)
        at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)
        at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
        at java.lang.Thread.run(Thread.java:722)
Caused by: Failed with the following exception:
        java.rmi.RemoteException: Could not find server for data domain Error connecting to the Endeca Server. If applicable, ensure your SSL settings are correct; nested exception is:
        org.apache.axis2.AxisFault: Could not find server for data domain
        at com.endeca.clover.adapters.BaseAdapter.preExecute(BaseAdapter.java:155)
        at org.jetel.graph.Node.run(Node.java:444)
        ... 3 more
Caused by: java.rmi.RemoteException: Could not find server for data domain Error connecting to the Endeca Server. If applicable, ensure your SSL settings are correct; nested exception is:
        org.apache.axis2.AxisFault: Could not find server for data domain
        at com.endeca.clover.adapters.DIWSConsumer.initIngestStub(DIWSConsumer.java:99)
        at com.endeca.clover.adapters.DIWSConsumer.<init>(DIWSConsumer.java:45)
        at com.endeca.clover.adapters.merge.MergeRecordsConsumer.<init>(MergeRecordsConsumer.java:51)
        at com.endeca.clover.adapters.merge.UpsertRecordsConsumer.<init>(UpsertRecordsConsumer.java:36)
        at com.endeca.clover.adapters.merge.MergeRecordsAdapter.getConsumer(MergeRecordsAdapter.java:110)
        at com.endeca.clover.adapters.DIWSAdapter.createConsumerThreads(DIWSAdapter.java:56)
        at com.endeca.clover.adapters.BaseAdapter.preExecute(BaseAdapter.java:146)
        ... 4 more
Caused by: org.apache.axis2.AxisFault: Could not find server for data domain
        at org.apache.axis2.util.Utils.getInboundFaultFromMessageContext(Utils.java:446)
        at org.apache.axis2.description.OutInAxisOperationClient.handleResponse(OutInAxisOperation.java:371)
        at org.apache.axis2.description.OutInAxisOperationClient.send(OutInAxisOperation.java:417)
        at org.apache.axis2.description.OutInAxisOperationClient.executeImpl(OutInAxisOperation.java:229)
        at org.apache.axis2.client.OperationClient.execute(OperationClient.java:165)
        at com.endeca.dataingest.axis2.ingest.IngestStub.ingestChanges(IngestStub.java:791)
        at com.endeca.clover.adapters.DIWSConsumer.initIngestStub(DIWSConsumer.java:88)
        ... 10 more
Kindly request your help in resolving this error.

Two soa domain with same name "TestSOADomain" sharing same SOA schema ?

I tried creating two soa domain with same name "TestSOADomain" (different path) sharing same SOA schema .However one domain came UP to Running mode and other domain going to AdminMode and "soa-infra" application of that domain is not active.
I do want to understand can this be possible with SOA ,ie. two soa domain sharing same SOA schema ?
If possible what are all the problems might come
1. While executing soa composites with asyncronous behaviour ?
2. How the polling services will work ?
3. will the XREF_DATA table ROW_NUMBER column inserted uniquely while inserting data from two different domain into same SOA schema ?
4. Other issues ?
Thanks

Each domain is expected to refer to its own unique database schema. Same SOA schema should not be shared by multiple SOA clusters/domains. It is technically possible though, I suppose, and still can run fine any one SOA environment at any given time with the other SOA environments/domains (sharing the same SOA schema) shutdown. It is not the general/recommended practice to share SOA schema across domains and there could be potential implications and unexpected behavior, particularly when the SOA environments pointing to the same schema are all running at a time.

File in IDLE mode

I am trying to clean up an old printer installation. I am down to one file that says it cannot be opened or emptied out of the trash because it is still open. When I drag it out of the trash and try to open it, it says I need to have an application to open it. I have no idea which application to pick.
I also went into my apple information for my computer and it claims the file is in idle mode. I need to close this file and remove it before I attempt to install my new printer software.
Help!

Welcome to Apple Discussions!
With that file in the trash, try holding the Option key (ALT on PC keyboards) while you select empty trash. That should remove it.
The likely reason it appears to be in use is that it is being used by MacOS, linked to the printer setup or queuing sub-system. Thus it doesn't need to be active in order to be 'locked' or 'in use'.

Chronic catastrophic data loss with Lion & servers

Auto-save and versions, when combined with multiple users and a server environment virtually guarantees catastrophic data loss.
Here's how you replicate it.
(1) Place a photo on a server.
For us, this is where we recommend people keep important files. Their desktop may be backed up with time machine, but the server is RAID 6 with hot spares, and on top of that is backed up every night. Much, much safer.
(2) Open that photo in preview. Crop it so that you can print it. Close preview. Notice it didn't ask you if you wanted to save?
(3) Open that file again. It's still cropped. The original? Gone. Choose "Revert to Saved" from the file menu. Notice the large number of empty windows on the right? Yup, you can't get back to the prior version, even though you never saved.
Now, as a network administrator, imagine the consequences of this for your network. Users accessing shared files and making changes they need, but not saving them because they don't need to be saved. Yup, their version is now THE definitive version for the entire network.
The ability to do non-destructive edits is something that computer users have been doing since, well, the dawn of computing more or less. Lion removes this. Now, add on top of that user mistakes in a network environment. User accidentally deletes all the text from a 24 page document. They don't know what to do so they close the app. Unless the backup has run since that 24 page document was created, it's gone. Forever. And ever. Amen.
Go to backups you say? What if the document isn't accessed for six months from when the user accidentally wiped it out. Hope your backup server is petabyte big, because otherwise that data is gone.
This is a huge, huge problem.
Joel

I am not an idiot. The very reason we are reporting this is that we are testing this and discovered it. It is not about "random people" changing things on the server. People with appropriate access can do catastrophic damage without even realizing it. Yes, I have also reported this via the Lion feedback.
Let me address some of the comments here:
> There is nothing to prevent someone on Snow Leopard from doing the same thing if anyone can save a document.
That's the problem. Nobody has to actually save to wipe data out with Lion. Versions _does not work_ on server volumes. I have tested this with Lion client and 10.6 server and 10.7 server. Same result. Massive data loss.
> Plus, any document over two weeks old would pop-up a big "locked" dialog if the user tried to modify it in Lion. You wouldn't get that before.
Great. Documents can only be inadvertently destroyed for two weeks. Not sure how this makes anything better.
>And why do you have Time Machine on the desktop instead of on the Server? It seems like it would more handy there.
The server is backed up, as are the clients. It's irrelevant to the problem being reported.
>You are the network administrator. Disable Preview and get your users a decent image editor.
Great idea! Until Photoshop supports versions. Microsoft has announced support for versions with office. I guess we'll have to disable that as well. Maybe we should try to fix the actual problem rather than just disabling software that used to work perfectly and moving on...
> The Versions feature is absolutely not appropriate for use in a multi-user context.
I agree. So do mac users stop using servers now? Doesn't seem like a good option.
> I find it hard to believe that any competent administrator would 1) upgrade clients to Lion this soon after release
I have no clients except my own on Lion at this point, for testing. This is exactly the kind of problem I need to trace down before I deal with huge issues from my users. Also, what happens when we buy new machines? Lion only...
> and 2) have versions enabled on shared disk.
We can turn off versions on a shared disk? I do not see any way to do this. Please enlighten me!
> 1) There is no evidence that the original poster has actully upgraded any client or is a network administrator.
I am a network administrator. This only happens with Lion and versions. I have tested this problem against both 10.6 server and 10.7 server. It exists on either.
> 2) Version is a feature of Lion, not the network. The scenario described by the original poster could occur on any non-HFS+ disk.
The problem is that versions _does not work_ on an AFP server, but acts as if it does. When you use "revert to save" you find that there are no versions. Not good...
Joel

Stamina Mode doesn't immediately take effect when screen is off.

This is what I observed after playing around with Stamina mode on the Z3C. My build version is: 23.0.1.A.5.79 and running Android Version 4.4.4.
When you manually lock the screen it doesn't immediately go into stamina mode, and I can still receive data from all apps and get all notifications. After about 5 mins of staying locked with no interruption from data received and notifications, Stamina mode will start working and only allow the allowed list of apps to receive data and display notifications. Another observation is that once Stamina mode is working as it should and one of the allowed apps wakes up the screen, Stamina mode will continue block any apps not listed as allowed to receive data and continue to work, which is PERFECT.
However, if any data is received between the time you lock the screen and the 5 min mark, notifications can keep coming from any app until the full 5 mins has gone through with no interruption from any apps data or notifications.
My question is why doesn't Stamina mode take effect immediately after you lock your phone and the screen is off? If it waits for 5 mins and data keeps coming every 1-4 mins, then Stamina mode will never be activated and the battery will drain as normal.

http://talk.sonymobile.com/t5/FAQ/Battery-time-and-enhancement-features/m-p/347874#U347874
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

MacBook Pro doesn't wake up from sleep mode

My MacBook Pro (late 2011) with OS Mavericks doesn't wake up from sleep mode anymore. Battery is fully charged and the cable is plugged in. I can still hear the ventilator running, but that's all. I never had any problems, but since about 2 weeks this problem occurs. It usually then woke up after 10-15min, but now nothing happened since 4 hours.
Is there anyone who could possible help me? Unfortunately there is no Apple Store in my area where I could go to.

Step 1
Take all the applicable steps in this support article. That's the starting point for any further efforts to solve the problem. Please read the whole article carefully (some of it is hidden by disclosure triangles) and don't skip any of the steps, including the ones under the heading "Additional troubleshooting." If you don't understand any of the steps, ask for guidance.
Step 2
If you're running OS X 10.8.5 or earlier, from the menu bar select
           ▹ System Preferences... ▹ Accessibility
If the checkbox at the bottom marked
          Enable access for assistive devices
is checked, uncheck it and test.
If you're running OS X 10.9 or later, select
           ▹ System Preferences... ▹ Security & Privacy ▹ Privacy ▹ Accessibility
If any applications are listed on the right and have a checked box next to them, uncheck all the boxes and test. You may first have to click the padlock icon in the lower left corner of the window and authenticate as an administrator to unlock the settings.
Step 3
In the Energy Saver pane of System Preferences, uncheck the box marked
          Put hard disks to sleep when possible
Step 4
This and the next step must be taken as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that heading, select
          View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You may see one or more reports with a name that begins with "Sleep Wake Failure" followed by a date. Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
Step 5
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ Diagnostic and Usage Messages
In the search box in the window's toolbar, enter "powerd" (without the quotes.)
You may see one or more lines like this:
com.apple.message.signature: Platform Failure
If you do see that, and you did everything in the preceeding steps, then you're dealing with an internal hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

What's best architecture for DAQmx app with two operational modes?

I have an architectural question. I am writing an application which takes measurements from a custom sensor which has two modes of operation: 1) idle mode where two voltages are sampled slowly, run through a transform, and then the result is plotted such that the user can see the idle state of the sensor; 2) a testing mode where the user defines a testing time of some number of seconds then hits 'Go' and records high-speed acquisition for the specified number of seconds (with some sort of simultaneous real-time plotting) and then writes the data out to a file. I am trying to use the 'Top Level Application using Events" VI template but have run into issues with the VI not responding to UI clicks when in an event case...I got around **some** of these issues but now I am stuck because I can't get the app to register an abort button click when in testing mode. I think I am missing something when it comes to events as LabVIEW defines them. (I'm a .NET programmer) My basic question is what is the best top-level VI architecture to use for something like this? I don't want to go down the wrong path and have to re-write the whole thing...
**I did come up with a seemingly neat way to get a tab control to switch tabs from inside an event case...I look at the X, Y coordinates of a mouse click and if it is within one of the tab selector zones at the top, left of the control I programmatically swith to the corresponding tab...seems like there should be an easier way but it works.

I think that the best would probably be a producer consumer type architecture with events. You can do a search in the example finder and find a good one. As for the events not responding, you probably just need to uncheck the check box for disabling the front panel until the event finishes. You will find this at the bottom of the dialog box for the event structure.
Joe.
"NOTHING IS EVER EASY"

What do you think of Auto-keyframe mode?

What do you think of Auto-keyframe mode?
Do you use it? If so, why? If not, why not?
John Dickinson covers this feature in this video tutorial and gives his opinion. I share John's opinion, but we want to know what others think.

I haven't upgraded to CS5 but looking at John Dickinson's video, it doesn't look particularly useful, even for beginners. I prefer the concept that I set keyframes when I choose, for the values I choose. I'd find it very frustrating to be playing around with an animation only to find keyframes have been set without my being aware of them if I'd turned on auto-keyframes. I don't see the practical difference of switching on auto-keyframes versus setting keyframes in the timeline (apart from the fact that auto-keyframes I guess would apply to any transformation regardless of whether or not you'd intended to keyframe them). So I doubt I'd be using the feature at all.

Data domain with auto-idle mode doesn't wake up

Similar Messages

Maybe you are looking for