DATA Export not success
Hi,
Below is the script I am using to export...the problem is that it is generating the log file but not generating the txt file in the same path.
I tried with the database->Rightclick->export->filename......it is showing succeeded but not generating file.
What I am missing here? Please help.
spool on to '\\Meta\CubeRef\data_EXPORT.log'
LOGIN testuser ****** ON testmach;
export database 'TEST_AP'.'TEST_CU' level0 data to data_file '\\Meta\CubeRef\data_EXP.txt';
Thanks in advance
You might want to try the following per the tech ref:
A file name or an absolute path to a file. If the string contains special characters, it must be enclosed in single or double quotation marks. Double quotation marks allows variable expansion; single quotation marks does not. If the file path contains a backslash ( \ ), it must be preceded with another backslash ( \\ ) to be interpreted correctly by the MaxL Shell.
Examples:
file01
'D:\\filename'
"$ARBORPATH/errors.txt"
"$ARBORPATH\\app\\sample\\basic\\calcdat.txt" (double quotation marks to expand the variable)
'/homes/fiona/scriptfile.msh' (UNIX file path)
Double back slashes....
You may find the export file "\\Meta\CubeRef\data_EXP.txt'" has been created in the app folder.
Similar Messages
-
Essbase Data Export not Overwriting existing data file
We have an ODI interface in our environment which is used to export the data from Essbase apps to text files using Data export calc scripts and then we load those text files in a relational database. Laetely we are seeing some issue where the Data Export calc script is not overwriting the file and is just appending the new data to the existing file.
The OverWriteFile option is set to ON.
SET DATAEXPORTOPTIONS {
DataExportLevel "Level0";
DataExportOverWriteFile ON;
DataExportDimHeader ON;
DataExportColHeader "Period";
DataExportDynamicCalc ON;
The "Scenario" variable is a substitution variable which is set during the runtime. We are trying to extract "Budget" but the calc script is not clearing the "Actual" scenario from the text file which was the scenario that was extracted earlier. Its like after the execution of the calc script, the file contains both "Actual" and "Budget" data. We are not able to find the root cause as in why this might be happening and why OVERWRITEFILE command is not being taken into account by the data export calc script.
We have also deleted the text data file to make sure there are no temporary files on the server or anything. But when we ran the data export directly from Essbase again, then again the file contained both "Actual" as well as "Budget" data which really strange. We have never encountered an issue like this before.
Any suggestions regarding this issue?Did some more testing and pretty much zoomed on the issue. Our Scenario is actually something like this "Q1FCST-Budget", "Q2FCST-Budget" etc
This is the reason why we need to use a member function because Calc Script reads "&ODI_SCENARIO" (which is set to Q2FCST-Budget) as a number and gives an error. To convert this value to a string we are using @member function. And, this seems the root cause of the issue. The ODI_Scenario variable is set to "Q2FCST-Budget", but when we run the script with this calculation function @member("&ODI_SCENARIO"), the data file brings back the values for "Q1FCST-Budget" out of nowhere in addition to "Q2FCST-Budget" data which we are trying to extract.
Successful Test Case 1:
1) Put Scenario "Q2FCST-Budget" in hard coded letters in Script and ran the script
e.g "Q2FCST-Phased"
2) Ran the Script
3) Result Ok.Script overwrote the file with Q2FCST-Budget data
Successful Case 2:
1) Put scenario in @member function
e.g. @member("Q2FCST-Budget")
2) Results again ok
Failed Case:
1) Deleted the file
2) Put scenario in a substitution variable and used the member function "@member("&ODI_Scenario") and Ran the script . *ODI_SCENARIO is set to Q@FCST-Budget in Essbase variables.
e.g. @member("&ODI_SCENARIO")
3) Result : Script contained both "Q1FCST-Budget" as well as "Q2FCST-Budget" data values in the text file.
We are still not close to the root cause and why is this issue happening. Putting the sub var in the member function changes the complete picture and gives us inaccurate results.
Any clues anyone? -
HFM Taskflow Email and Data Export Not Working
Hello all,
I am attempting to set up the HFM taskflow email and Data export functionality. Unfortunately, the email is not working. I completed the set up of my SMTP mail using the EPM Configurator, and tested the email funtiontionality for FR and it works well. Not the case for Taskflow.
Is there an addtional seetings that needs to be configured. I am also unable to extract data using the taskflow. The export path is specified in the textbox, but the file is not exporting to the server location. Is there any type of port or setting that needs to be configured.
I am on version 11.1.2.1. Please help
Edited by: 944327 on 17/09/2012 14:52I wanted to create a thread about this too. There is a big problem in Lightrooms email sending. Photos are sent inline but not as attachments. They need to be sent as attachments so that the email clients can save them easily.
This is actually important to some and responses by Adobe have not understood this.
--2510201414571280874==00004
content-id: <AEDF354435956231.560091>
content-description: L1120161.jpg
content-transfer-encoding: BASE64
content-disposition: inline; filename="L1120161.jpg"
content-type: image/jpg; name="L1120161.jpg"
As for your low res image. It is probably the setting you used, you might have it set to "email quality"
Ankur -
Hello,
I am facing following issue regarding web analytic service for specific date 2014-08-18:
Verified following services which are running and status was success on that specific date 2014-08-18 :
Web Analytics Service
Microsoft Usage Data Import
Microsoft SharePoint Foundation Usage Data Processing
Observed latest Web Analytics Setting as below :
LastAggregationDateId
20140817 - The date id of the last successfully completed data aggregation
LastAggregationTime
2014-08-18T00:00:13.210 - The time of the last successfully completed data aggregation
LastBestBetSuggestionAggregationDateId
20140818 - The date id of the last successfully completed best bet suggestion data aggregation. This date id should not be reset to an earlier date manually.
LastDataCopyTime
2014-08-17T23:59:09.693 - The last time the data were copied from the staging databases to this reporting database for aggregation
Above settings says that Data has not copied from Staging DB to Reporting DB on Date 2014-08-18
In order to verify the same I have checked as follow:
SELECT COUNT (*) FROM [dbo].[WATrafficAggregationByDate] WITH (NOLOCK)
WHERE [DateId] = 20140818
Above SQL Query has returned ZERO value.
Can anyone please let me know Why data has not been copied from staging DB to Reporting DB even timer job status is success ?
Your help will be much appreciated.
Thanks and Regards,
Dipti ChhatrapatiThe image itself has the answer
The user requests a page, and the action gets picked up by the Web Analytics service that runs on SharePoint.
The Web Analytics service logs this in the “.usage” files.
A Timer job called “Microsoft SharePoint Foundation Usage Data Import” by default runs every 30 minutes. It imports the logs into the staging database.
Each night the “Microsoft SharePoint Foundation Usage Data Processing” Timer job runs and transforms the data into the reporting database.
The last run time of the import from staging and the aggregation is logged in the Settings table in the Reporting database.
Usage and Health Data Collection Service Application collects Data about Usage and Health of your farm.
This information is used for Health Monitoring and this is also required for running the Web Analytics Service. If you do not have a Usage and Health Data Collection Service Application or your
Usage and Health Data Collection Proxy is stopped, you will not see any data in the Web Analytics Report
Regards Chen V [MCTS SharePoint 2010] -
Data is not exported by the FD : GUI_DOWNLOAD in background.
Hi all,
Data is not Exported by the program scheduled in background by the FD "GUI_DOWNLOAD"
its only exporting into the excel sheet and notepad in foreground.
Plase me out how should I follow the process.
Thanks & Regards,
RajeevYou can write data to Application server in background. For path of file on Application server see TCode AL11
e.g.
file = '/tmp'. "Path
concatenate file '/itab.txt' into file.
open dataset file for output in text mode.
if SY-SUBRC = 0.
write : / 'File opened on application server' .
else.
write : / 'Unable to open file on application server'.
endif.
loop at itab.
transfer itab to file.
endloop.
if SY-SUBRC = 0.
write : / 'Data transfer to file on application server complete.' .
else.
write : / 'Unable to transfer data to file on application server.'.
endif.
close dataset file.
if SY-SUBRC = 0.
write : / 'File closed on application server' .
else.
write : / 'Unable to close file on application server'.
endif. -
I used 30 day trial of Acrobat XI and all the functions work perfectly. But, when I buy the program (either download or disk) my PDF that export to Excel is not working. The excel columns and data are not properly aligned as they should be. The Trial version aligns everything perfectly. What is happening? I use a MAC 10.9.5. But this shouldn't matter because the trial version works perfectly. Can anyone help?
just found out that this is posted in the wrong section.
-
Database Export exporting data does not export time of date columns
Hi,
I'm trying to export some data using Database Export and for the date columns the resulting scripts truncates dates showing only the date part not the time one. If export from a query result the resulting script include all the information (date and time).
Does anyone has an idea on how to export all the date information using database export.
thanksYep, as Jim said, under Tools / Preferences / Database / NLS Parameters I changed Date Format to DD-MON-YYYY HH24:MI:SS
Seems to have done the trick. What's the significance of DD-MON-RR versus DD-MON-YY? -
Used Migration Assistant to successfully transfer PC files to Mini. However file creation or modified date does not transfer. Date of creation is listed as day of transfer. I would gratefully appreciate any help in solving this?
I have the same problem; used Migration Assistant to transfer all my pix from PC to MacbookPro, however dates of pix were not transferred. Date created as the date of transfer. Cannot sort my pix according to date.
Anybody has an answer? -
Hello,everyone.
I am using virtex6 FPGA and trying to download mcs file to PROM and have failed.
I download .bit file to FPGA and succeed.
When i try to download .mcs file to PROM XCF128X-FTG64C(BPI Flash) and choose Slave SelectMAP Mode
and the process is about 68% it fails.
The message below the IMapct is as belows:
done.
PROGRESS_END - End Operation.
Elapsed time = 0 sec.
// *** BATCH CMD : identifyMPM
// *** BATCH CMD : assignFile -p 1 -file "C:/Users/Administrator/Desktop/TEST/LED/led.bit"
'1': Loading file 'C:/Users/Administrator/Desktop/TEST/LED/led.bit' ...
done.
INFO:iMPACT:2257 - Startup Clock has been changed to 'JtagClk' in the bitstream stored in memory,
but the original bitstream file remains unchanged.
UserID read from the bitstream file = 0xFFFFFFFF.
INFO:iMPACT:501 - '1': Added Device xc6vlx240t successfully.
INFO:iMPACT - Current time: 2014/3/13 8:48:14
// *** BATCH CMD : Program -p 1
PROGRESS_START - Starting Operation.
Maximum TCK operating frequency for this device chain: 66000000.
Validating chain...
Boundary-scan chain validated successfully.
INFO:iMPACT - 1: Over-temperature condition detected! [ 230.52C > 120.00C]
1: Device Temperature: Current Reading: 230.52 C, Max. Reading: 230.52 C
1: VCCINT Supply: Current Reading: 2.997 V, Max. Reading: 2.997 V
1: VCCAUX Supply: Current Reading: 2.997 V, Max. Reading: 2.997 V
'1': Programming device...
Match_cycle = NoWait.
Match cycle: NoWait
LCK_cycle = NoWait.
LCK cycle: NoWait
done.
INFO:iMPACT:2219 - Status register values:
INFO:iMPACT - 0011 1111 0111 1110 0100 1011 1100 0000
INFO:iMPACT:579 - '1': Completed downloading bit file to device.
INFO:iMPACT:188 - '1': Programming completed successfully.
Match_cycle = NoWait.
Match cycle: NoWait
LCK_cycle = NoWait.
LCK cycle: NoWait
INFO:iMPACT - '1': Checking done pin....done.
'1': Programmed successfully.
PROGRESS_END - End Operation.
Elapsed time = 23 sec.
Selected part: XCF128X
// *** BATCH CMD : attachflash -position 1 -bpi "XCF128X"
// *** BATCH CMD : assignfiletoattachedflash -position 1 -file "C:/Users/Administrator/Desktop/TEST/LED/leda.mcs"
INFO:iMPACT - Current time: 2014/3/13 8:49:32
// *** BATCH CMD : Program -p 1 -dataWidth 16 -rs1 NONE -rs0 NONE -bpionly -e -v -loadfpga
PROGRESS_START - Starting Operation.
Maximum TCK operating frequency for this device chain: 66000000.
Validating chain...
Boundary-scan chain validated successfully.
INFO:iMPACT - 1: Over-temperature condition detected! [ 230.52C > 120.00C]
1: Device Temperature: Current Reading: 230.52 C, Max. Reading: 230.52 C
1: VCCINT Supply: Current Reading: 2.997 V, Max. Reading: 2.997 V
1: VCCAUX Supply: Current Reading: 2.997 V, Max. Reading: 2.997 V
'1': BPI access core not detected. BPI access core will be downloaded to the device to enable operations.
INFO:iMPACT - Downloading core file D:/Xilinx/14.3/ISE_DS/ISE/virtex6/data/xc6vlx240t_jbpi.cor.
'1': Downloading core...
Match_cycle = NoWait.
Match cycle: NoWait
LCK_cycle = NoWait.
LCK cycle: NoWait
done.
INFO:iMPACT:2219 - Status register values:
INFO:iMPACT - 0011 1111 0111 1110 0100 1011 1100 0000
INFO:iMPACT:2492 - '1': Completed downloading core to device.
Current cable speed is set to 6.000 Mhz.
Cable speed is default to 3Mhz or lower for BPI operations.
Current cable speed is set to 3.000 Mhz.
Setting Flash Control Pins ...
Setting Configuration Register ...
Populating BPI common flash interface ...
Common Flash Interface Information Query completed successfully.
INFO:iMPACT - Common Flash Interface Information from Device:
INFO:iMPACT - Verification string: 51 52 59
INFO:iMPACT - Manufacturer ID: 49
INFO:iMPACT - Vendor ID: 01
INFO:iMPACT - Device Code: 18
Setting Flash Control Pins ...
Using x16 mode ...
Setting Flash Control Pins ...
Setting Configuration Register ...
'1': Erasing device...
'1': Start address = 0x00000000, End address = 0x008CE03B.
done.
'1': Erasure completed successfully.
Setting Flash Control Pins ...
Using x16 mode ...
Setting Flash Control Pins ...
Setting Configuration Register ...
INFO:iMPACT - Using Word Programming.
'1': Programming Flash.
done.
Setting Flash Control Pins ...
'1': Flash Programming completed successfully.
Using x16 mode ...
Setting Flash Control Pins ...
Setting Configuration Register ...
'1': Reading device contents...
done.
'1': Verification completed.
Setting Flash Control Pins ...
Current cable speed is resumed to 6.000 Mhz.
'1': Configuration data download to FPGA was not successful. DONE did not go high, please check your configuration setup and mode settings.
`Elapsed time = 814 sec.
and i find many people have met the same thing. But they are spartan series FPGA and i try to low the Resistances of Mode pins,M0 M1 and M2, but the problem does not been solved.
I have read the status Registers and find there is an over-temperature state
and in Impact i could not readback the registers. It is strange.
I am anxious about this problem and have not solved it yet
What reasons may it be?
Hope for your answer, thank youHi~I want to know if you solve the configuration problem for virtex-6?
As I encounter the same configuration problem, I want to consult you with some question.
Can I have your email?
gszakacs wrote:
I have measured the VCCINT and find it is 1.0V, not 2.997V;
That is not at all surprising. I always assumed the problem is with reading the XADC (system monitor) block and not with the voltage or temperature.
my Reference board is ML605
That would have been nice to know at the beginning...
It seems that you have selected the correct mode, assuming your jumpers are set as required in the ML605 Hardware User's Guide. See table 1-27, table 1-33 and the note below it about switch S1.
I'm not that familiar with the details of this reference design, but it may be that the slave SelectMap circuitry requires a reset or power cycle to actually configure the FPGA. Have you tried power-cycling to see if the FPGA boots from the flash?
I'd also suggest that you select the V6 in the JTAG chain view, then go to the debug menu of Impact and select Read Device Status (this is from memory, but it's something like that). That will not only show the bits of the configuration status register, but also describe what each bit means. Among other things you can check the state of the FPGA's configuration logic and the Mode pins.
-
I have updated my iPhone to iOS6.1.3 today and lost all my photos and some data(messageies) I have tried iTunes back up but still not success, please help.
If your messages and photos weren't part of your backup, then they're gone.
Certainly you weren't foolish enough to update the iOS on your phone before importing your photos off your phone for safe keeping on your computer like you would do with any digital camera, were you? -
Configuration data download to FPGA was not successful.
I have designed a board with the Spartan 6 LX9 TQFP144 Package.
I am able to load a bitstream to the device with the digilent HS-2. However the fpga can not selfconfigure from
the attached SPI Flash.
Here is the console output from iMPACT:
GUI --- Auto connect to cable...
INFO:iMPACT - Digilent Plugin: Plugin Version: 2.4.4
INFO:iMPACT - Digilent Plugin: found 1 device(s).
INFO:iMPACT - Digilent Plugin: opening device: "JtagHs2", SN:210249983579
INFO:iMPACT - Digilent Plugin: User Name: JtagHs2
INFO:iMPACT - Digilent Plugin: Product Name: Digilent JTAG-HS2
INFO:iMPACT - Digilent Plugin: Serial Number: 210249983579
INFO:iMPACT - Digilent Plugin: Product ID: 30900152
INFO:iMPACT - Digilent Plugin: Firmware Version: 0109
INFO:iMPACT - Digilent Plugin: JTAG Port Number: 0
INFO:iMPACT - Digilent Plugin: JTAG Clock Frequency: 10000000 Hz
Attempting to identify devices in the boundary-scan chain configuration...
INFO:iMPACT - Current time: 27.07.2015 16:19:26
PROGRESS_START - Starting Operation.
Identifying chain contents...'0': : Manufacturer's ID = Xilinx xc6slx9, Version : 2
INFO:iMPACT:1777 -
Reading C:/Xilinx/ISE/14.7/ISE_DS/ISE/spartan6/data/xc6slx9.bsd...
INFO:iMPACT:501 - '1': Added Device xc6slx9 successfully.
done.
PROGRESS_END - End Operation.
Elapsed time = 0 sec.
Selected part: N25Q128
Unprotect sectors: FALSE
INFO:iMPACT - Current time: 27.07.2015 16:20:19
PROGRESS_START - Starting Operation.
Maximum TCK operating frequency for this device chain: 25000000.
Validating chain...
Boundary-scan chain validated successfully.
'1': SPI access core not detected. SPI access core will be downloaded to the device to enable operations.
INFO:iMPACT - Downloading core file C:/Xilinx/ISE/14.7/ISE_DS/ISE/spartan6/data/xc6slx9_spi.cor.
'1': Downloading core...
LCK_cycle = NoWait.
LCK cycle: NoWait
done.
'1': Reading status register contents...
INFO:iMPACT:2219 - Status register values:
INFO:iMPACT - 0011 1100 1110 1100
INFO:iMPACT:2492 - '1': Completed downloading core to device.
'1': IDCODE is '20ba18' (in hex).
'1': ID Check passed.
'1': IDCODE is '20ba18' (in hex).
'1': ID Check passed.
'1': Erasing Device.
'1': Using Sector Erase.
'1': Programming Flash.
'1': Reading device contents...
done.
'1': Verification completed.
'1':Programming in x4 mode.
'1': Configuration data download to FPGA was not successful. DONE did not go high, please check your configuration setup and mode settings.
INFO:iMPACT - '1': Flash was not programmed successfully.
PROGRESS_END - End Operation.
Elapsed time = 78 sec.
If i read that correctly Data was written to the Flash but the fpga was not able to configure from that data.
Done-pin is connected to 3.3V via a 470 Ohms Resisor.
The Flash is a N25Q128A13ESE40G, Datasheet here: http://www.farnell.com/datasheets/1674445.pdf
I can perform a readback, checksum and an erase.
If i do a read device status this is the console output:
INFO:iMPACT - Current time: 27.07.2015 16:36:27
Maximum TCK operating frequency for this device chain: 25000000.
Validating chain...
Boundary-scan chain validated successfully.
'1': IDCODE is '20ba18' (in hex).
'1': ID Check passed.
'1': IDCODE is '20ba18' (in hex).
'1': ID Check passed.
'1': IDCODE is '20ba18' (in hex).
'1': ID Check passed.
INFO:iMPACT - '1': Reloading FPGA configuration data stored in flash...
INFO:iMPACT:182 - done.
On the Flash side I have pulled s# and Hold up to 3.3V with 100k Resistors.
Can someone help me to find the problem?So does the FPGA try to read the SPI flash when it boots ?
out with scope, probe the clock and the data , see if you can see it streamig out when you boot.
If so, then one other thing I see wrong a few times is data path of the SPI, single bit or 4 bits of data.
you have to make certain the bit file was created in the same width as the fgpa is expecting,
In ISE I think its in Impact where you make the SPI flash file and specify this .
-
Hello,everyone.
I am using virtex5 XC5VLX155 FPGA and trying to download mcs file to BPI flash and have failed.
The flash is JS28F512P30E. The iMpact version is 14.7.
FPGA's VCCINT is 1.0V, VCCAUX is 2.5V. VCCO is 3.3V.
M[2:0] is 010 in Master BPI. Ican program FPGA through JTAG. The FPGA_DONE pin 's LED can always flash.
The error is shown as below. the full IMPACT console log and the SCHEMATIC_ FLASH are in the attachment.
Using x16 mode ...
Setting Flash Control Pins ...
'1': Erasing device...
'1': Start address = 0x00000000, End address = 0x004E4AFF.
done.
'1': Erasure completed successfully.
Using x16 mode ...
Setting Flash Control Pins ...
INFO:iMPACT - Using Word Programming.
'1': Programming Flash.
done.
'1': Flash Programming completed successfully.
'1': Configuration data download to FPGA was not successful. DONE did not go high, please check your configuration setup and mode settings.
PROGRESS_END - End Operation.
Elapsed time = 692 sec.
Hope everyone give more advices. Thank you.
Thank you very much!
I can read ack the mcs file, but the file is much bigger than the original mcs file.
The flash datasheet is in the attachment.
I want to use the Master BPI mode. In BPI_UP, the address starts at 0 and increments by 1 until the DONE pin is
asserted. I do not know the difference between the BPI_UP and BPI_DOWN.
ps: The R61,R62 and R63 are not weld on the board. The ADV pin is tie to VSS .
-
Regarding : Material document data and PO data do not match (Plant)
Hi Gurus,
Please go through this BAPI program.
While uploading it is giving an error ' Material document data and PO data do not match (Plant) '.
Please help regarding this issue.For all Other moment types it is working fine except this 351 moment type.
dATA: i_excel TYPE truxs_t_text_data. "work table for excel upload
DATA: BEGIN OF it_itab OCCURS 100,
docdate(10),
postdate(10),
mvt_type(3), "Movement Type
plant(4), "Plant
lgort(4),
pur_doc(10), "Purchase Document No
po_item(3), "Purchase Document Item No
material(18), "Material Number
delnote(16),
erfmg(13),
uom(3),
lfmng(13), "Quantity
batch(10) TYPE c,
vfdat TYPE vfdat,
END OF it_itab.
DATA: it_goodsmvt_head TYPE TABLE OF bapi2017_gm_head_01 INITIAL SIZE 100,
it_goodsmvt_code TYPE TABLE OF bapi2017_gm_code INITIAL SIZE 100,
it_goodsmvt_item TYPE TABLE OF bapi2017_gm_item_create INITIAL SIZE 100.
DATA: wa_goodsmvt_head LIKE LINE OF it_goodsmvt_head,
wa_goodsmvt_code LIKE LINE OF it_goodsmvt_code,
wa_goodsmvt_item LIKE LINE OF it_goodsmvt_item.
DATA: w_mat_doc TYPE bapi2017_gm_head_ret-mat_doc,
w_year TYPE bapi2017_gm_head_ret-doc_year.
DATA: BEGIN OF it_errmsg_goodsmvt OCCURS 10.
INCLUDE STRUCTURE bapiret2.
DATA: END OF it_errmsg_goodsmvt.
DATA : obj_type LIKE bapiache09-obj_type,
obj_key LIKE bapiache09-obj_key,
obj_sys LIKE bapiache09-obj_sys.
DATA: v_date1 TYPE sy-datum.
DATA: v_date2 TYPE sy-datum.
DATA: w_lines TYPE i.
DATA: errflag.
SELECTION-SCREEN BEGIN OF BLOCK bk1 WITH FRAME TITLE text-100.
PARAMETERS: p_file TYPE rlgrap-filename.
SELECTION-SCREEN END OF BLOCK bk1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
field_name = 'P_FILE'
IMPORTING
file_name = p_file.
Start-of-selection processing
START-OF-SELECTION.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
i_line_header = 'X'
i_tab_raw_data = i_excel
i_filename = p_file
TABLES
i_tab_converted_data = it_itab[]
EXCEPTIONS
conversion_failed = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
LOOP AT it_itab.
REFRESH it_goodsmvt_head.
REFRESH it_goodsmvt_item.
CONCATENATE it_itab-docdate6(4) it_itab-docdate3(2) it_itab-docdate+0(2) INTO v_date1.
CONCATENATE it_itab-postdate6(4) it_itab-postdate3(2) it_itab-postdate+0(2) INTO v_date2.
wa_goodsmvt_head-pstng_date = v_date2.
wa_goodsmvt_head-doc_date = v_date1.
wa_goodsmvt_head-ref_doc_no = it_itab-delnote.
wa_goodsmvt_head-pr_uname = sy-uname.
APPEND wa_goodsmvt_head TO it_goodsmvt_head.
Maintain it_goodsmvt_code
wa_goodsmvt_code-gm_code = '04'.
Maintain it_goodsmvt_item
*LOOP AT it_itab.
IF wa_goodsmvt_item-po_number IS INITIAL.
wa_goodsmvt_item-po_number = it_itab-pur_doc.
wa_goodsmvt_item-move_type = it_itab-mvt_type.
wa_goodsmvt_item-MOVE_PLANT = it_itab-plant.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = it_itab-material
IMPORTING
output = it_itab-material.
wa_goodsmvt_item-material = it_itab-material.
wa_goodsmvt_item-stge_loc = it_itab-lgort.
wa_goodsmvt_item-po_item = it_itab-po_item.
wa_goodsmvt_item-entry_qnt = it_itab-erfmg.
wa_goodsmvt_item-ENTRY_UOM_ISO = it_itab-uom.
wa_goodsmvt_item-po_pr_qnt = it_itab-lfmng.
wa_goodsmvt_item-batch = it_itab-batch.
wa_goodsmvt_item-expirydate = it_itab-vfdat.
wa_goodsmvt_item-NO_MORE_GR = 'X'.
wa_goodsmvt_item-mvt_ind = 'B'.
APPEND wa_goodsmvt_item TO it_goodsmvt_item.
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
EXPORTING
goodsmvt_header = wa_goodsmvt_head
goodsmvt_code = wa_goodsmvt_code
IMPORTING
materialdocument = w_mat_doc
TABLES
goodsmvt_item = it_goodsmvt_item
return = it_errmsg_goodsmvt.
Process of commit work
IF it_goodsmvt_head[] IS NOT INITIAL.
DESCRIBE TABLE it_goodsmvt_head LINES w_lines.
ENDIF.
IF it_goodsmvt_item[] IS NOT INITIAL.
DESCRIBE TABLE it_goodsmvt_item LINES w_lines.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'.
IMPORTING
RETURN =
CLEAR errflag.
READ TABLE it_errmsg_goodsmvt INDEX 1.
IF it_errmsg_goodsmvt-type EQ 'E'.
WRITE:/'Error in function', it_errmsg_goodsmvt-message.
errflag = 'X'.
ELSE.
WRITE:/ it_errmsg_goodsmvt-message.
ENDIF.
IF errflag IS INITIAL.
COMMIT WORK AND WAIT.
IF sy-subrc NE 0.
WRITE:/ 'Error in updating'.
EXIT.
ELSE.
WRITE:/ 'Material Document created successfully and the Document Number for the Material',
wa_goodsmvt_item-material,'is:', w_mat_doc, w_year.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP.Hey,
Just wanted to post that in my case this was the error of MVT_IND field in item table. When I made it from 'B' to blank then it worked.
Mine is solved....
Thanks -
Storage location Data is not saving in table MARD using BAPI method.
Hi Experts,
TABLES: T001L, "Storage Locations
MARA, "General Material Data
MAKT, "Material Descriptions
MBEW, "Material Valuation
MARC, "Plant Data for Material
MARD. "Storage Location Data for Mate
DATA: BAPI_HEAD LIKE BAPIMATHEAD, "MATERIAL
BAPI_MAKT LIKE BAPI_MAKT, "Material Description
BAPI_MARA1 LIKE BAPI_MARA, "Client Data
BAPI_MARAX LIKE BAPI_MARAX,
BAPI_MARC1 LIKE BAPI_MARC, "Plant View
BAPI_MARCX LIKE BAPI_MARCX,
BAPI_MBEW1 LIKE BAPI_MBEW, "Accounting View
BAPI_MBEWX LIKE BAPI_MBEWX,
BAPI_MARD1 LIKE BAPI_MARD, "Storage location
BAPI_MARDX LIKE BAPI_MARDX,
BAPI_RETURN LIKE BAPIRET2.
DATA: BEGIN OF INT_MAKT OCCURS 100.
INCLUDE STRUCTURE BAPI_MAKT.
DATA: END OF INT_MAKT.
DATA: BEGIN OF INT_MAT OCCURS 100,
WERKS(4), "Plant
LGORT(4), "Storage location
MTART(4), "Material type
MATNR(18), "Material number
MAKTX(40), "Material description
MATKL(9) , "Material group
MBRSH(1), "Industry sector
MEINS(3), "Base unit of measure
GEWEI(3), "Weight Unit
SPART(2), "Division
EKGRP(3), "Purchasing group
VPRSV(1), "Price control indicator
STPRS(12), "Standard price
PEINH(3), "Price unit
SPRAS(2), "Language key
BKLAS(4), "VALUATION CLASS
VERPR TYPE VERPR_BAPI, "MOVING PRICE
BWTTY(1), "Valuation Catogory
MLAST(1), "Price determination
MLMAA(1), "Material Ledger
EKLAS(4), "Valuation Class for sales order stock
QKLAS(4), "Valuation Class for Project Stock
ZKPRS TYPE DZKPRS, "Future price
ZKDAT TYPE DZKDAT, "Valid From Date
BWPRS TYPE BWPRS, "Tax price 1
BWPS1 TYPE BWPS1, "Tax price 2
VJBWS TYPE VJBWS, "Tax price 3
ABWKZ TYPE ABWKZ, "Devaluatin indicator
BWPRH TYPE BWPRH, "Commercial price 1
BWPH1 TYPE BWPH1, "Commercial price 2
VJBWH TYPE VJBWH, "Commercial Price 3
XLIFO(1), "LIFO/FIFO revelant
MYPOL(4), "Pool no for LIFO
MMSTA(2), "Plant specific material status
AUSME TYPE AUSME, "Unit of issue
QMATA(6), "Material Authorization group
RBNRM(9), "Catalog Profile
WEBAZ TYPE WEBAZ, "Goods reciept processing time in days
PRFRQ TYPE PRFRQ, "Recurring Insepction
SSQSS(8), "QM Control key
QZGTP(4), "Certificate Type
QSSYS(4), "Required QM system for vendor
END OF INT_MAT.
DATA: V_MATNR TYPE MARA-MATNR.
SELECT-OPTIONS:
PLANT FOR MARC-WERKS OBLIGATORY MEMORY ID PLT,
S_LGORT FOR MARD-LGORT MEMORY ID STL,
MATERIAL FOR MARA-MATNR MEMORY ID MAT,
MATLTYPE FOR MARA-MTART MEMORY ID MTY,
DIVISION FOR MARA-SPART MEMORY ID DIV.
PARAMETERS: F_FILE LIKE RLGRAP-FILENAME
DEFAULT 'C:\DATA\ZMATERIAL.XLS' MEMORY ID F_FILE,
GETDATA AS CHECKBOX, "Tick to download materials data to local harddisk
UPDDATA AS CHECKBOX. "Tick to update date to Materials Master
IF GETDATA = 'X'.
PERFORM DOWNLOAD_DATA.
PERFORM DOWNLOAD_FILE.
ENDIF.
IF UPDDATA = 'X'.
PERFORM UPLOAD_FILE.
PERFORM UPDATE_MM.
ENDIF.
FORM DOWNLOAD_DATA.
SELECT * FROM MARC WHERE LVORM EQ ' '
AND WERKS IN PLANT
AND MATNR IN MATERIAL.
CLEAR MARA.
SELECT SINGLE * FROM MARA WHERE MATNR = MARC-MATNR.
CHECK MATLTYPE.
CHECK DIVISION.
CLEAR MBEW.
SELECT SINGLE * FROM MBEW WHERE MATNR = MARC-MATNR
AND BWKEY = MARC-WERKS.
CLEAR MAKT.
SELECT SINGLE * FROM MAKT WHERE SPRAS = 'EN'
AND MATNR = MARC-MATNR.
CLEAR MARD.
SELECT SINGLE * FROM MARD WHERE WERKS IN PLANT
AND LGORT IN S_LGORT.
WRITE:/ MARC-WERKS, "Plant
MARD-LGORT, "Storage location
MARA-MTART, "Material type
MARA-MATNR, "Material number
MARA-MATKL, "Material group
MARA-MBRSH, "Industry sector
MARA-MEINS, "Base unit of measure
MARA-GEWEI, "Weight Unit
MARA-SPART, "Division
MARC-EKGRP, "Purchasing group
MBEW-VPRSV, "Price control indicator
MBEW-STPRS, "Standard price
MBEW-PEINH, "Price unit
MBEW-BKLAS, "VALUE CLASS
MAKT-SPRAS, "Language key
MBEW-BKLAS, "Valuation Class
MBEW-VERPR, "Moving price
MAKT-MAKTX, "Material description
MBEW-BWTTY, "Valutaion Catogorey
MBEW-MLAST, "Price Determination
MBEW-MLMAA, "Material Ledger
MBEW-EKLAS, "Valuation class for Sales order stock
MBEW-QKLAS, "Valutaion Class for Project Stock
MBEW-ZKPRS, "Future Price
MBEW-ZKDAT, "Valid From Date
MBEW-BWPRS, "Tax price 1
MBEW-BWPS1, "Tax price 2
MBEW-VJBWS, "Tax price 3
MBEW-ABWKZ, "Devaluatin indicator
MBEW-BWPRH, "Commercial price 1
MBEW-BWPH1, "Commercial price 2
MBEW-VJBWH, "Commercial Price 3
MBEW-XLIFO, "LIFO/FIFO revelant
MBEW-MYPOL, "Pool no for LIFO
MARC-MMSTA, "Plant specific material status
MARC-AUSME, "Unit of issue
MARC-QMATA, "Material Authorization group
MARA-RBNRM, "Catalog Profile
MARC-WEBAZ, "Goods reciept processing time in days
MARC-PRFRQ, "Recurring Insepction
MARC-SSQSS, "QM Control key
MARC-QZGTP, "Certificate Type
MARC-QSSYS. "Required QM system for vendor
INT_MAT-WERKS = MARC-WERKS. "Plant
INT_MAT-LGORT = MARD-LGORT. "Storage Location
INT_MAT-MTART = MARA-MTART. "Material type
INT_MAT-MATNR = MARA-MATNR. "Material number
INT_MAT-MAKTX = MAKT-MAKTX. "Material description
INT_MAT-MATKL = MARA-MATKL. "Material group
INT_MAT-MBRSH = MARA-MBRSH. "Industry sector
INT_MAT-MEINS = MARA-MEINS. "Base unit of measure
INT_MAT-GEWEI = MARA-GEWEI. "Weight Unit
INT_MAT-SPART = MARA-SPART. "Division
INT_MAT-EKGRP = MARC-EKGRP. "Purchasing group
INT_MAT-VPRSV = MBEW-VPRSV. "Price control indicator
INT_MAT-STPRS = MBEW-STPRS. "Standard price
INT_MAT-PEINH = MBEW-PEINH. "Price unit
INT_MAT-SPRAS = MAKT-SPRAS. "Language key
INT_MAT-BKLAS = MBEW-BKLAS. "VALVATION CLASS
INT_MAT-VERPR = MBEW-VERPR. "MOVING price
INT_MAT-BWTTY = MBEW-BWTTY. "Valutaion Catogorey
INT_MAT-MLAST = MBEW-MLAST. "Price Determination
INT_MAT-MLMAA = MBEW-MLMAA. "Material Ledger
INT_MAT-EKLAS = MBEW-EKLAS. "Valuation class forS.O Stock
INT_MAT-QKLAS = MBEW-QKLAS. "Valutaion Class for Project
INT_MAT-ZKPRS = MBEW-ZKPRS. "Future Price
INT_MAT-ZKDAT = MBEW-ZKDAT. "Valid From Date
INT_MAT-BWPRS = MBEW-BWPRS. "Tax price 1
INT_MAT-BWPS1 = MBEW-BWPS1. "Tax price 2
INT_MAT-VJBWS = MBEW-VJBWS. "Tax price 3
INT_MAT-ABWKZ = MBEW-ABWKZ. "Devaluatin indicator
INT_MAT-BWPRH = MBEW-BWPRH. "Commercial price 1
INT_MAT-BWPH1 = MBEW-BWPH1. "Commercial price 2
INT_MAT-VJBWH = MBEW-VJBWH. "Commercial Price 3
INT_MAT-XLIFO = MBEW-XLIFO. "LIFO/FIFO revelant
INT_MAT-MYPOL = MBEW-MYPOL. "Pool no for LIFO
INT_MAT-MMSTA = MARC-MMSTA. "Plant specific material
INT_MAT-AUSME = MARC-AUSME. "Unit of issue
INT_MAT-QMATA = MARC-QMATA. "Material Authorization group
INT_MAT-RBNRM = MARA-RBNRM. "Catalog Profile
INT_MAT-WEBAZ = MARC-WEBAZ. "Goods reciept processing
INT_MAT-PRFRQ = MARC-PRFRQ. "Recurring Insepction
INT_MAT-SSQSS = MARC-SSQSS. "QM Control key
INT_MAT-QZGTP = MARC-QZGTP. "Certificate Type
INT_MAT-QSSYS = MARC-QSSYS. "Required QM system for
APPEND INT_MAT.
CLEAR INT_MAT.
ENDSELECT.
ENDFORM.
FORM DOWNLOAD_FILE.
call function 'WS_DOWNLOAD'
EXPORTING
FILENAME = F_FILE
FILETYPE = 'DAT'
FILETYPE = 'WK1'
tables
data_tab = INT_MAT
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_WRITE_ERROR = 2
INVALID_FILESIZE = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
OTHERS = 10.
IF SY-SUBRC = 0.
FORMAT COLOR COL_GROUP.
WRITE:/ 'Data Download Successfully to your local harddisk'.
SKIP.
ENDIF.
ENDFORM.
FORM UPLOAD_FILE.
call function 'WS_UPLOAD'
EXPORTING
FILENAME = F_FILE
FILETYPE = 'DAT'
FILETYPE = 'WK1'
tables
data_tab = INT_MAT
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_WRITE_ERROR = 2
INVALID_FILESIZE = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
OTHERS = 10.
IF SY-SUBRC = 0.
FORMAT COLOR COL_GROUP.
WRITE:/ 'Data Upload Successfully from your local harddisk'.
SKIP.
ENDIF.
ENDFORM.
FORM UPDATE_MM.
LOOP AT INT_MAT.
CALL FUNCTION 'CONVERSION_EXIT_MATN1_INPUT'
EXPORTING
INPUT = INT_MAT-MATNR
IMPORTING
OUTPUT = INT_MAT-MATNR
EXCEPTIONS
LENGTH_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Header
BAPI_HEAD-MATERIAL = INT_MAT-MATNR.
BAPI_HEAD-IND_SECTOR = INT_MAT-MBRSH.
BAPI_HEAD-MATL_TYPE = INT_MAT-MTART.
BAPI_HEAD-BASIC_VIEW = 'X'.
BAPI_HEAD-PURCHASE_VIEW = 'X'.
BAPI_HEAD-ACCOUNT_VIEW = 'X'.
Material Description
REFRESH INT_MAKT.
INT_MAKT-LANGU = INT_MAT-SPRAS.
INT_MAKT-MATL_DESC = INT_MAT-MAKTX.
APPEND INT_MAKT.
Client Data - Basic
BAPI_MARA1-MATL_GROUP = INT_MAT-MATKL.
BAPI_MARA1-BASE_UOM = INT_MAT-MEINS.
BAPI_MARA1-UNIT_OF_WT = INT_MAT-GEWEI.
BAPI_MARA1-DIVISION = INT_MAT-SPART.
BAPI_MARAX-MATL_GROUP = 'X'.
BAPI_MARAX-BASE_UOM = 'X'.
BAPI_MARAX-UNIT_OF_WT = 'X'.
BAPI_MARAX-DIVISION = 'X'.
Plant - Purchasing
BAPI_MARC1-PLANT = INT_MAT-WERKS.
BAPI_MARC1-PUR_GROUP = INT_MAT-EKGRP.
BAPI_MARC1-PUR_STATUS = INT_MAT-MMSTA.
BAPI_MARC1-ISSUE_UNIT = INT_MAT-AUSME.
BAPI_MARC1-QM_AUTHGRP = INT_MAT-QMATA.
BAPI_MARC1-GR_PR_TIME = INT_MAT-WEBAZ.
BAPI_MARC1-INSP_INT = INT_MAT-PRFRQ.
BAPI_MARC1-CTRL_KEY = INT_MAT-SSQSS.
BAPI_MARC1-CERT_TYPE = INT_MAT-QZGTP.
BAPI_MARC1-QM_RGMTS = INT_MAT-QSSYS.
BAPI_MARCX-PLANT = INT_MAT-WERKS.
BAPI_MARCX-PUR_GROUP = 'X'.
BAPI_MARCX-PUR_STATUS = 'X'.
BAPI_MARCX-ISSUE_UNIT = 'X'.
BAPI_MARCX-QM_AUTHGRP = 'X'.
BAPI_MARCX-GR_PR_TIME = 'X'.
BAPI_MARCX-INSP_INT = 'X'.
BAPI_MARCX-CTRL_KEY = 'X'.
BAPI_MARCX-CERT_TYPE = 'X'.
BAPI_MARCX-QM_RGMTS = 'X'.
Accounting 1
BAPI_MBEW1-VAL_AREA = INT_MAT-WERKS.
BAPI_MBEW1-PRICE_CTRL = INT_MAT-VPRSV.
BAPI_MBEW1-STD_PRICE = INT_MAT-STPRS.
BAPI_MBEW1-PRICE_UNIT = INT_MAT-PEINH.
BAPI_MBEW1-MOVING_PR = INT_MAT-VERPR.
BAPI_MBEW1-VAL_CLASS = INT_MAT-BKLAS.
BAPI_MBEW1-VAL_CAT = INT_MAT-BWTTY.
BAPI_MBEW1-ML_SETTLE = INT_MAT-MLAST.
BAPI_MBEW1-ML_ACTIVE = INT_MAT-MLMAA.
BAPI_MBEW1-VM_SO_STK = INT_MAT-EKLAS.
BAPI_MBEW1-VM_P_STOCK = INT_MAT-QKLAS.
BAPI_MBEW1-FUTURE_PR = INT_MAT-ZKPRS.
BAPI_MBEW1-VALID_FROM = INT_MAT-ZKDAT.
*ACCOUNTING 2
BAPI_MBEW1-TAXPRICE_1 = INT_MAT-BWPRS.
BAPI_MBEW1-TAXPRICE_2 = INT_MAT-BWPS1.
BAPI_MBEW1-TAXPRICE_3 = INT_MAT-VJBWS.
BAPI_MBEW1-DEVAL_IND = INT_MAT-ABWKZ.
BAPI_MBEW1-COMMPRICE1 = INT_MAT-BWPRH.
BAPI_MBEW1-COMMPRICE2 = INT_MAT-BWPH1.
BAPI_MBEW1-COMMPRICE3 = INT_MAT-VJBWH.
BAPI_MBEW1-LIFO_FIFO = INT_MAT-XLIFO.
BAPI_MBEW1-POOLNUMBER = INT_MAT-MYPOL.
BAPI_MBEWX-VAL_AREA = INT_MAT-WERKS.
BAPI_MBEWX-PRICE_CTRL = 'X'.
BAPI_MBEWX-STD_PRICE = 'X'.
BAPI_MBEWX-PRICE_UNIT = 'X'.
BAPI_MBEWX-MOVING_PR = 'X'.
BAPI_MBEWX-VAL_CLASS = 'X'.
BAPI_MBEWX-VAL_CAT = 'x'.
BAPI_MBEWX-ML_SETTLE = 'X'.
BAPI_MBEWX-ML_ACTIVE = 'X'.
BAPI_MBEWX-VM_SO_STK = 'X'.
BAPI_MBEWX-VM_P_STOCK = 'X'.
BAPI_MBEWX-FUTURE_PR = 'X'.
BAPI_MBEWX-VALID_FROM = 'X'.
BAPI_MBEWX-TAXPRICE_1 = 'X'.
BAPI_MBEWX-TAXPRICE_2 = 'X'.
BAPI_MBEWX-TAXPRICE_3 = 'X'.
BAPI_MBEWX-DEVAL_IND = 'X'.
BAPI_MBEWX-COMMPRICE1 = 'X'.
BAPI_MBEWX-COMMPRICE2 = 'X'.
BAPI_MBEWX-COMMPRICE3 = 'X'.
BAPI_MBEWX-LIFO_FIFO = 'X'.
BAPI_MBEWX-POOLNUMBER = 'X'.
*Storage Locations
BAPI_MARD1-PLANT = INT_MAT-WERKS.
BAPI_MARD1-STGE_LOC = INT_MAT-LGORT.
BAPI_MARDX-PLANT = INT_MAT-WERKS.
BAPI_MARDX-STGE_LOC = INT_MAT-LGORT.
WRITE:/ BAPI_HEAD-MATERIAL, BAPI_MARC1-PLANT ,BAPI_MARD1-STGE_LOC.
call function 'BAPI_MATERIAL_SAVEDATA'
exporting
HEADDATA = BAPI_HEAD
CLIENTDATA = BAPI_MARA1
CLIENTDATAX = BAPI_MARAX
PLANTDATA = BAPI_MARC1
PLANTDATAX = BAPI_MARCX
FORECASTPARAMETERS =
FORECASTPARAMETERSX =
PLANNINGDATA =
PLANNINGDATAX =
<b> STORAGELOCATIONDATA = BAPI_MARD1
STORAGELOCATIONDATAX = BAPI_MARDX</b>
VALUATIONDATA = BAPI_MBEW1
VALUATIONDATAX = BAPI_MBEWX
WAREHOUSENUMBERDATA =
WAREHOUSENUMBERDATAX =
SALESDATA = BAPI_MVKE1
SALESDATAX = BAPI_MVKEX
STORAGETYPEDATA =
STORAGETYPEDATAX =
IMPORTING
RETURN = BAPI_RETURN
TABLES
MATERIALDESCRIPTION = INT_MAKT
UNITSOFMEASURE =
UNITSOFMEASUREX =
INTERNATIONALARTNOS =
MATERIALLONGTEXT =
TAXCLASSIFICATIONS =
RETURNMESSAGES =
PRTDATA =
PRTDATAX =
EXTENSIONIN =
EXTENSIONINX =
IF BAPI_RETURN-TYPE = 'E'.
WRITE:/ 'Error Message ', BAPI_RETURN-MESSAGE.
ENDIF.
ENDLOOP.
ENDFORM.
<b>i am using this bapi method to copy materials from one plant to another plant using storage location so here what happenig is everyting is going correct but only the storage location data is not saving in table mard so any body faced this kind of problem please tell me.... and one more dbt
bapi_marcx-pur_status = 'x' what is 'X' here??? is that mandatory field or required field ???
points wil be rewarded.
reagrds,
sunil k airam.In the HEADDATA structure, STORAGE_VIEW should also be set as 'X' , in order to update storage location data
for example
BAPI_HEAD-STORAGE_VIEW = 'X'.
Also, PUR_STATUS corresponds to field MARA-MSTAE whose domain has value table T141, therefore values in the field are checked against T141
Edited by: Harris Veziris on May 12, 2008 12:37 PM -
Hello,
Here is my problem:
Data was imported into the staging area. After resolving some errors and running the job, I got the data to move over to the next area. From there, data should be moving over into the DW. I have been troubleshooting for hours and cannot reslove this
issue. I have restarted the sql service services, I have ran a couple packages manually, and the job is running successfully.
What are some reasons why data is not getting into the data warehouse? Where should I be looking?
Your help is greatly appreciated!!Anything is possible.
So, just to reiterate, running the job manually works, running the scheduled job does not result in errors neither data arriving to the DW, right? And it used to, correct?
If so, the 1st step would be to examine the configuration(s). But not before you inspect the package. Do you have an ability to export it to a file system and open in BIDS?
Arthur My Blog
Maybe you are looking for
-
Fastest CPU for K7T Turbo Limited Edition
I would like to ask, which is the fastest processor (Athlon XP) which I can put into this motherboard?? The general information on this website say that up to Athlon XP 2000+, but then there is a link on CPU Support and there is only up to XP 1800+,
-
How to delete a data element? - error message
Error in the ABAP Application Program The current ABAP program "SAPLRSSG" had to be terminated because it has come across a statement that unfortunately cannot be executed. The following syntax error occurred in program "GP0GVENGV13S7QSCONTM4LCHNZG "
-
Why won't Numbers save my character styles shortcuts?
I like to keep all my character styles shortcuts thru all my projects yet Numbers won't save them thru restarts or quits but it used to. Any help appreciated
-
Acrobat 7 not included with Creative Suite 2 downloads?
Hey Jeff, thanks for your reply, but I told not the whole truth We have some CS2 Premium (for Mac) here and want to reinstall them, we've got no single Acrobat 7 here. If I want to reinstall the whole CS2 Premium or a part of it from our old installa
-
No render preview window??
Hi, Having started another project on LT, I find that after a "normal" render preview, the window no longer shows up. I haven't had this situation prior and wonder where I might find a reason for such. Thanks!