Data Flow is not working in Workflow
Hello!
I want to start my workflow with 'SAPI_WAPI_CREATE_EVENT'.
But the workflow is not starting because it has error in the data flow of its task. Goal of the workflow is that the event send an email to the employee.
what should i do in the data flow? what have I put in the data flow?
I created an ABAP-Class with the event 'create_wf' and the method 'create_workflow' .
This class includes the interfaces bi_object, bi_persistent and if_workflow.
My method 'create_workflow' call the FM 'SAP_WAPI_CREATE_EVENT'. But what are the exporting parameter 'object_type' and object_key' and 'event'? Is 'event' my own event 'create_wf'? And where I define the event? (My report calling the method 'create_workflow'. Is this the definition?)
In my workflow I have the task and I don't know which objects or parameters to put in in the data flow? In the task (flag 'basic data') I have the object category APAB class with the object type 'zsieb_startwf' (name of my class) and the method i explaind before 'create_wf' (which is my event in the class)'. in the flag event trigger I put the same data again.
Did I forget anything?
Where do I integrate my workflow in my class? Or is this unnecessary?
Hope, you understand now my problem better.
Hi Anna,
I think you may be confusing 'events' as they relate to Workflow and 'events' as they exist in classes.
There is a table which contains business object related events, SWETYPV. This provides the linkage between your business object (such as Invoice, BUS2081, or Purchase Order, BUS2012) and Event (Created, Changed, etc) and your workflow.
You need to know what object type and what event (in the workflow context) are required before you can proceed.
So if you are trying to start a workflow from SAP_WAPI_CREATE_EVENT, your import parameters might be:
call function 'SAP_WAPI_CREATE_EVENT'
exporting
object_type = 'BUS2081'
object_key = yourdocumentkey
event = 'CREATED'
commit_work = 'X'
event_language = sy-langu
importing
return_code = lv_retcode
event_id = lv_eventid.
Then, in transaction SWETYPV, you would have an entry linking the Object/Event pair to the 'receiver' - the Workflow Template, and use a Receiver Function Module such as SWW_WI_CREATE_VIA_EVENT_IBF to actually raise the event.
Regards,
Sue
Similar Messages
-
Hallo,
I have an issue with a bdc FM i created not working with workflow.
If I test the FM, it works ok.
If i Test the method calling the FM it works ok.
if i test the task calling the method it works ok.
If I run the workflow it doesn't work, and i get the following messages:
S DC 1 Unable to initialise ABAP Control Framework ...
S DC 1 Unable to initialise ABAP Control Framework ...
S DC 6 Control Framework: Fatal error - GUI cannot be reached
A SY 2 Exception condition "CNTL_ERROR" raised.
What is the meaning of this??
Bdc is calling Me54n to set to click on reject button during Purchase Requisition Release,
putting the PR processing state in status '08'
I checked all the binding which are fine. No container parameter are passed a part from the business object.
here is the FM coding:
FUNCTION ZME_N_WF_REJ_PR.
""Local interface:
*" IMPORTING
*" VALUE(CTU) LIKE APQI-PUTACTIVE DEFAULT 'X'
*" VALUE(MODE) LIKE APQI-PUTACTIVE DEFAULT 'N'
*" VALUE(UPDATE) LIKE APQI-PUTACTIVE DEFAULT 'L'
*" VALUE(GROUP) LIKE APQI-GROUPID OPTIONAL
*" VALUE(USER) LIKE APQI-USERID OPTIONAL
*" VALUE(KEEP) LIKE APQI-QERASE OPTIONAL
*" VALUE(HOLDDATE) LIKE APQI-STARTDATE OPTIONAL
*" VALUE(NODATA) LIKE APQI-PUTACTIVE DEFAULT '/'
*" VALUE(BANFN_003) LIKE BDCDATA-FVAL
*" EXPORTING
*" VALUE(SUBRC) LIKE SYST-SUBRC
*" TABLES
*" MESSTAB STRUCTURE BDCMSGCOLL OPTIONAL
subrc = 0.
perform bdc_nodata using NODATA.
perform open_group using GROUP USER KEEP HOLDDATE CTU.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=MECHOB'.
*perform bdc_field using 'DYN_6000-LIST'
LIST_001.
perform bdc_field using 'BDC_CURSOR'
'MEREQ3328-AFNAM'.
*perform bdc_field using 'MEREQ3328-EKGRP'
EKGRP_002.
perform bdc_dynpro using 'SAPLMEGUI' '0002'.
perform bdc_field using 'BDC_OKCODE'
'=MEOK'.
perform bdc_field using 'BDC_CURSOR'
'MEPO_SELECT-BANFN'.
perform bdc_field using 'MEPO_SELECT-BANFN'
BANFN_003.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=MEREJECT'.
perform bdc_field using 'BDC_CURSOR'
'DYN_6000-LIST'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=MESAVE'.
perform bdc_field using 'BDC_CURSOR'
'DYN_6000-LIST'.
perform bdc_transaction tables messtab
using 'ME54N'
CTU
MODE
UPDATE.
if sy-subrc <> 0.
subrc = sy-subrc.
exit.
endif.
perform close_group using CTU.
ENDFUNCTION.
INCLUDE BDCRECXY .
I tries the same approach on ML81N to block a service entry sheet.(pressing the lock icon),
I get exactly the same issue.
Anybody knows how to resolve?
Or how to do the same without using a bdc call?
regards,
marcoHi
this is the Method callind the FM
object is BUS2105 w delegation ZBUS2105.
BEGIN_METHOD ZRELEASEREJECTED CHANGING CONTAINER.
Data: CTU TYPE APQI-PUTACTIVE,
MODE TYPE APQI-PUTACTIVE,
UPDATE TYPE APQI-PUTACTIVE,
NODATA TYPE APQI-PUTACTIVE.
CTU = 'X'.
MODE = 'N'.
UPDATE = 'L'.
NODATA = '/'.
iobjectkey = object-key.
CALL FUNCTION 'ZME_N_WF_REJ_PR'
EXPORTING
BANFN_003 = iobjectkey
NODATA = NODATA
UPDATE = UPDATE
MODE = MODE
CTU = CTU
IMPORTING
SUBRC = SUBRC
TABLES
MESSTAB = MESSAGE
EXCEPTIONS
OTHERS = 01.
CASE SY-SUBRC.
WHEN 0. " OK
WHEN OTHERS. " to be implemented
ENDCASE.
SWC_SET_ELEMENT CONTAINER 'Subrc' SUBRC.
SWC_SET_TABLE CONTAINER 'MESSAGE' MESSAGE.
END_METHOD. -
My cover flow does not work on my 3rd gen 64 gb ipod touch
My cover flow does not work on my 3rd gen 64 gb ipod touch and neither does shake to shuffle.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Date parameter does not work in SharePoint 2010 report using SQL 2008 Server Reporting Service
Here is the settings:
SharePoint 2010 with SQL server 2008 reporting services configured
When create a report for a SP list using SQL server report builder (3.0) the date parameter does not work.
The data parameter is set as "date and time" type and field name equals the col name in the SP list
When run the report, the whatever dates I select, the result is always the same, so the parameters do not take any effect.
Is any step missing?
Thanks for any advice !Hi ,
How did you configure you "date and time" type parameter and field name equals the col name in the SP list?
Have you tested if other type parameter worked?
Have you tried typing the date format as 20140722 in your date parameter filed before run the report?
http://whitepages.unlimitedviz.com/2012/02/using-sharepoint-filters-with-reporting-services-parameters-for-personalized-reports/
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Daniel Yang
TechNet Community Support -
Pie chart with two measures and date dimension navigation not working
Hi Experts,
Pie chart with two measures and date dimension navigation not working. Any help is appreciated.
Thanks
VHi Deepak,
I had time dimension in the RPD.
I have stacked bar chart with same time dim like year & month in the report. when I go to legand and set navigation it is working fine. But not with pie chart.
I am not not sure what is the problem. When I click on Pie chart it is not navigating to the target report. Can it be any other issues..??? -
Webcenter Spaces: Task Flow is not working in page made from template
Hi, I have a task flow in which there is one .jsff page, which has 2 Panel Group Layouts. In first one, there is a button, which has an action to close or open second Panel Group Layout. When i add this task flow to my template and Preview it, it is working fine(i.e on clicking button, second panel group layout is getting opened up)) BUT when i make a page and set its template to the one i made. On that page, this task flow is not working(i.e. on clicking button, second panel Group Layout does not open up). Not even showing any error in logs. Please provide a solution..??
What do you mean by Open/Close a Panel Group Layout?
Are you Setting rendered/visible property for PGL?
Are you setting the property programmatically or declaratively?
Thanks,
Husain -
Oracle date parameter query not working?
http://stackoverflow.com/questions/14539489/oracle-date-parameter-query-not-working
Trying to run the below query, but always fails even though the parameter values matches. I'm thinking there is a precision issue for :xRowVersion_prev parameter. I want too keep as much precision as possible.
Delete
from CONCURRENCYTESTITEMS
where ITEMID = :xItemId
and ROWVERSION = :xRowVersion_prev
The Oracle Rowversion is a TimestampLTZ and so is the oracle parameter type.
The same code & query works in Sql Server, but not Oracle.
Public Function CreateConnection() As IDbConnection
Dim sl As New SettingsLoader
Dim cs As String = sl.ObtainConnectionString
Dim cn As OracleConnection = New OracleConnection(cs)
cn.Open()
Return cn
End Function
Public Function CreateCommand(connection As IDbConnection) As IDbCommand
Dim cmd As OracleCommand = DirectCast(connection.CreateCommand, OracleCommand)
cmd.BindByName = True
Return cmd
End Function
<TestMethod()>
<TestCategory("Oracle")> _
Public Sub Test_POC_Delete()
Dim connection As IDbConnection = CreateConnection()
Dim rowver As DateTime = DateTime.Now
Dim id As Decimal
Using cmd As IDbCommand = CreateCommand(connection)
cmd.CommandText = "insert into CONCURRENCYTESTITEMS values(SEQ_CONCURRENCYTESTITEMS.nextval,'bla bla bla',:xRowVersion) returning ITEMID into :myOutputParameter"
Dim p As OracleParameter = New OracleParameter
p.Direction = ParameterDirection.ReturnValue
p.DbType = DbType.Decimal
p.ParameterName = "myOutputParameter"
cmd.Parameters.Add(p)
Dim v As OracleParameter = New OracleParameter
v.Direction = ParameterDirection.Input
v.OracleDbType = OracleDbType.TimeStampLTZ
v.ParameterName = "xRowVersion"
v.Value = rowver
cmd.Parameters.Add(v)
cmd.ExecuteNonQuery()
id = CType(p.Value, Decimal)
End Using
Using cmd As IDbCommand = m_DBTypesFactory.CreateCommand(connection)
cmd.CommandText = " Delete from CONCURRENCYTESTITEMS where ITEMID = :xItemId and ROWVERSION = :xRowVersion_prev"
Dim p As OracleParameter = New OracleParameter
p.Direction = ParameterDirection.Input
p.DbType = DbType.Decimal
p.ParameterName = "xItemId"
p.Value = id
cmd.Parameters.Add(p)
Dim v As OracleParameter = New OracleParameter
v.Direction = ParameterDirection.Input
v.OracleDbType = OracleDbType.TimeStampLTZ
v.ParameterName = "xRowVersion_prev"
v.Value = rowver
v.Precision = 6 '????
cmd.Parameters.Add(v)
Dim cnt As Integer = cmd.ExecuteNonQuery()
If cnt = 0 Then Assert.Fail() 'should delete
End Using
connection.Close()
End Sub
Schema:
-- ****** Object: Table SYSTEM.CONCURRENCYTESTITEMS Script Date: 1/26/2013 11:56:50 AM ******
CREATE TABLE "CONCURRENCYTESTITEMS" (
"ITEMID" NUMBER(19,0) NOT NULL,
"NOTES" NCHAR(200) NOT NULL,
"ROWVERSION" TIMESTAMP(6) WITH LOCAL TIME ZONE NOT NULL)
STORAGE (
NEXT 1048576 )
Sequence:
-- ****** Object: Sequence SYSTEM.SEQ_CONCURRENCYTESTITEMS Script Date: 1/26/2013 12:12:48 PM ******
CREATE SEQUENCE "SEQ_CONCURRENCYTESTITEMS"
START WITH 1
CACHE 20
MAXVALUE 9999999999999999999999999999still not comming...
i have one table each entry is having only one fromdata and one todate only
i am running below in sql it is showing two rows. ok.
select t1.U_frmdate,t1.U_todate ,ISNULL(t2.firstName,'')+ ',' +ISNULL(t2.middleName ,'')+','+ISNULL(t2.lastName,'') AS NAME, T2.empID AS EMPID, T2.U_emp AS Empticket,t2.U_PFAcc,t0.U_pf
from [@PR_PRCSAL1] t0 inner join [@PR_OPRCSAL] t1
on t0.DocEntry = t1.DocEntry
inner join ohem t2
on t2.empID = t0.U_empid where t0.U_empid between '830' and '850' and t1.U_frmdate ='20160801' and t1.u_todate='20160830'
in commond promt
select t1.U_frmdate,t1.U_todate ,ISNULL(t2.firstName,'')+ ',' +ISNULL(t2.middleName ,'')+','+ISNULL(t2.lastName,'') AS NAME, T2.empID AS EMPID, T2.U_emp AS Empticket,t2.U_PFAcc,t0.U_pf
from [@PR_PRCSAL1] t0 inner join [@PR_OPRCSAL] t1
on t0.DocEntry = t1.DocEntry
inner join ohem t2
on t2.empID = t0.U_empid where t0.U_empid between {?FromEmid} and {?ToEmid} and t1.U_frmdate ={?FDate} and t1.u_todate={?TDate}
still not showing any results.. -
My international data roaming is not working in china, why?
I am currently traveling in mid-east china, but my data roaming is not working. it shows good single bar, but when I try to receive emails (from gmail or AOL account), it gives me error messages. it is very frustrating. it has been 3 days that I can't retrieve emails. I do have voice service though.
You might need to contact VZW for some trouble shooting help. Unless you are using a 3rd party simcard...then you might have to check with them to make sure their isn't an issue.
-
Use member on data form does not work
Hello,
"Use member on data" option does not work on composite Data Form. Business rule associated with composite form.
Who is resolve this problem?
Version hyperion: 11.1.2
ThanksI don't have a solution for you but more steps to solve the problem
You are ultimately on the right track in some ways but break it down into it's components.
The problem could like in the business rule, the form connection, the variables, even the order of operations could all be in play.
So I would strip this baby down to its bare bones then build it back up.
1) Run the business rule. Each one separately and only after the previous ones is complete without variables and without touching the form
Is it successful: go to 2
If it isn't successful: trouble shoot the calc and or try running in EAS natively to see if that gives you ideas
2) Run the calc outside the form but with variables included. Did it prompt you correctly.
Is it successful: go to 3
If it isn't. What is wrong with the variable
3) Now attach it to the form but don't hide the prompts
Still good go to 4
4) hide the prompts and run on save
And if it fails on step four then it's not picking up the right variables in the prompt. And you need to look at why it wouldn't grab the right item.
This will isolate your problem for you and give you steps to fix it. Ultimately 99% of the time something did change in the structure for example that is impacting the calc. And when you isolate the problem this will reveal itself quite quickly. -
Bdc not working with workflow - background task
Hallo,
I have an issue with a bdc FM i created not working with workflow.
If I test the FM, it works ok.
If i Test the method calling the FM it works ok.
if i test the task calling the method it works ok.
If I run the workflow it doesn't work, and i get the following messages:
S DC 1 Unable to initialise ABAP Control Framework ...
S DC 1 Unable to initialise ABAP Control Framework ...
S DC 6 Control Framework: Fatal error - GUI cannot be reached
A SY 2 Exception condition "CNTL_ERROR" raised.
What is the meaning of this??
Bdc is calling Me54n to set to click on reject button during Purchase Requisition Release,
putting the PR processing state in status '08'
I checked all the binding which are fine. No container parameter are passed a part from the business object.
here is the FM coding:
FUNCTION ZME_N_WF_REJ_PR.
""Local interface:
*" IMPORTING
*" VALUE(CTU) LIKE APQI-PUTACTIVE DEFAULT 'X'
*" VALUE(MODE) LIKE APQI-PUTACTIVE DEFAULT 'N'
*" VALUE(UPDATE) LIKE APQI-PUTACTIVE DEFAULT 'L'
*" VALUE(GROUP) LIKE APQI-GROUPID OPTIONAL
*" VALUE(USER) LIKE APQI-USERID OPTIONAL
*" VALUE(KEEP) LIKE APQI-QERASE OPTIONAL
*" VALUE(HOLDDATE) LIKE APQI-STARTDATE OPTIONAL
*" VALUE(NODATA) LIKE APQI-PUTACTIVE DEFAULT '/'
*" VALUE(BANFN_003) LIKE BDCDATA-FVAL
*" EXPORTING
*" VALUE(SUBRC) LIKE SYST-SUBRC
*" TABLES
*" MESSTAB STRUCTURE BDCMSGCOLL OPTIONAL
subrc = 0.
perform bdc_nodata using NODATA.
perform open_group using GROUP USER KEEP HOLDDATE CTU.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=MECHOB'.
*perform bdc_field using 'DYN_6000-LIST'
LIST_001.
perform bdc_field using 'BDC_CURSOR'
'MEREQ3328-AFNAM'.
*perform bdc_field using 'MEREQ3328-EKGRP'
EKGRP_002.
perform bdc_dynpro using 'SAPLMEGUI' '0002'.
perform bdc_field using 'BDC_OKCODE'
'=MEOK'.
perform bdc_field using 'BDC_CURSOR'
'MEPO_SELECT-BANFN'.
perform bdc_field using 'MEPO_SELECT-BANFN'
BANFN_003.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=MEREJECT'.
perform bdc_field using 'BDC_CURSOR'
'DYN_6000-LIST'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=MESAVE'.
perform bdc_field using 'BDC_CURSOR'
'DYN_6000-LIST'.
perform bdc_transaction tables messtab
using 'ME54N'
CTU
MODE
UPDATE.
if sy-subrc 0.
subrc = sy-subrc.
exit.
endif.
perform close_group using CTU.
ENDFUNCTION.
INCLUDE BDCRECXY .
I tries the same approach on ML81N to block a service entry sheet.(pressing the lock icon),
I get exactly the same issue.
Anybody knows how to resolve?
Or how to do the same without using a bdc call?
regards,
marcoHallo,
I have an issue with a bdc FM i created not working with workflow.
If I test the FM, it works ok.
If i Test the method calling the FM it works ok.
if i test the task calling the method it works ok.
If I run the workflow it doesn't work, and i get the following messages:
S DC 1 Unable to initialise ABAP Control Framework ...
S DC 1 Unable to initialise ABAP Control Framework ...
S DC 6 Control Framework: Fatal error - GUI cannot be reached
A SY 2 Exception condition "CNTL_ERROR" raised.
What is the meaning of this??
Bdc is calling Me54n to set to click on reject button during Purchase Requisition Release,
putting the PR processing state in status '08'
I checked all the binding which are fine. No container parameter are passed a part from the business object.
here is the FM coding:
FUNCTION ZME_N_WF_REJ_PR.
""Local interface:
*" IMPORTING
*" VALUE(CTU) LIKE APQI-PUTACTIVE DEFAULT 'X'
*" VALUE(MODE) LIKE APQI-PUTACTIVE DEFAULT 'N'
*" VALUE(UPDATE) LIKE APQI-PUTACTIVE DEFAULT 'L'
*" VALUE(GROUP) LIKE APQI-GROUPID OPTIONAL
*" VALUE(USER) LIKE APQI-USERID OPTIONAL
*" VALUE(KEEP) LIKE APQI-QERASE OPTIONAL
*" VALUE(HOLDDATE) LIKE APQI-STARTDATE OPTIONAL
*" VALUE(NODATA) LIKE APQI-PUTACTIVE DEFAULT '/'
*" VALUE(BANFN_003) LIKE BDCDATA-FVAL
*" EXPORTING
*" VALUE(SUBRC) LIKE SYST-SUBRC
*" TABLES
*" MESSTAB STRUCTURE BDCMSGCOLL OPTIONAL
subrc = 0.
perform bdc_nodata using NODATA.
perform open_group using GROUP USER KEEP HOLDDATE CTU.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=MECHOB'.
*perform bdc_field using 'DYN_6000-LIST'
LIST_001.
perform bdc_field using 'BDC_CURSOR'
'MEREQ3328-AFNAM'.
*perform bdc_field using 'MEREQ3328-EKGRP'
EKGRP_002.
perform bdc_dynpro using 'SAPLMEGUI' '0002'.
perform bdc_field using 'BDC_OKCODE'
'=MEOK'.
perform bdc_field using 'BDC_CURSOR'
'MEPO_SELECT-BANFN'.
perform bdc_field using 'MEPO_SELECT-BANFN'
BANFN_003.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=MEREJECT'.
perform bdc_field using 'BDC_CURSOR'
'DYN_6000-LIST'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=MESAVE'.
perform bdc_field using 'BDC_CURSOR'
'DYN_6000-LIST'.
perform bdc_transaction tables messtab
using 'ME54N'
CTU
MODE
UPDATE.
if sy-subrc 0.
subrc = sy-subrc.
exit.
endif.
perform close_group using CTU.
ENDFUNCTION.
INCLUDE BDCRECXY .
I tries the same approach on ML81N to block a service entry sheet.(pressing the lock icon),
I get exactly the same issue.
Anybody knows how to resolve?
Or how to do the same without using a bdc call?
regards,
marco -
I have iPhone 4 and I update it to iOS 7 and when I try to start the personal hotspot it crashed and for sometime my cellular data was also not working then allot a sudden the personal hotspot icon disappeared from my settings.
Has anyone faced a problem like this!!!No. If you go Settings App > General > Reset > "Erase All Content and Settings", you will have the same iOS that was on the iPhone when you tapped the Erase button. If you believe your iPhone is Jailbroken, then this will not work. If you use iTunes on computer, this will put iPhone to current iOS which is iOS 7.0.2
-
Since last week my date & time have not worked on my 5c. The date & time are constantly wrong. I've shut down, doesn't work. Set it automatically, doesn't work. I don't get texts or calls when it's sleeping. Any suggestions?
try a reset.
Hold the home & power buttons down simultaneously until you see the Apple logo appear.
Note: no data will be lost. -
Droid Razr Maxx HD Data & SMS does NOT work in South Korea
If you are going to South Korea this phone only operates as a "dumb phone" for phone calls ONLY. Data & SMS does not work at all. I contacted Global Support daily for one week with no resolution! I received conflicting information with 2 support folks telling me that the fix was to do a factory reset. So I reluctantly did this and it did not fix anything. It only wasted my time especially re-installing all my apps, etc. Then 4 support folks told me that you should never do this out of the country!! Anyway the last person i spoke to which was a network technician was very honest. He told me that I was "SOL" and he had no idea how to fix this problem. He said that he would have to get some teams together to try to fix the problem. And I was told that I would receive an email with an update. And of course I have not received any email of correspondence from Verizon. Very frustrating...
I found a solution. Okay so with the most recent update Verizon made the switch from sending text messages over their 1x network and moved them to their LTE (and possibly 3g) network, hence the reason they are sending so much faster. Today I was in a classroom that is underground and has terrible reception and noticed that I was getting delivery reports again but that my texts were sending slower, like they used to. I dug around in the phones programing menu and found a new option call "MO SMS over IMS" and it was enabled. Disabling it switches your texts back onto the old 1x network. So if you choose to make the switch, your delivery reports will come back but sending will go back to being a little slower. To get to this menu open up your dialer and type in ##7764726. Next hit send and when prompted with a password type in 000000 and hit verify. Scroll down to SMS/MMS settings and select it. Next scroll to the bottom, select "MO SMS over IMS", and disable it. Now your good delivery reports back!
-
Mail flow is not working Exchange 2010 to 2013 in coexistence mode
Hi ,
We are migrating Exchange 2010 sp3 to Exchange 2013.
mail flow is not working from 2010 to 2013, mails are qued up in smtp relay queueu.
already added 2010 ip address to 2013 receive connector and give anonymous permission.
but still mails are smtp relay queue.Hi Sujith,
As requested by
Nithyanandham please post the error from Queue Viewer.
Few things to check.
Please remove IP address from "Default Receive connector" first.
Ensure both servers can ping by FQDN and it returns correct IP. i.e. ping exch2013.contoso.com
Make sure both exchange server can communicate each other. if possible try to telnet port 25 by FQDN of the Exchange2013 server and try to send an email from exchange2010 using the URL below. if there is any error please post error.
http://exchange.mvps.org/smtp_frames.htm
Make sure "Exchange server Authentication" is ticked in your default receive connector properties. If not ticked tick it and restart Transport service and check mail flow again.
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. -
Process Data Creator ID not working
Hi All (and Paul)
I want to send an email to the process creator when a request has been approved. The best way to do this, it seems, is to use the "EmailService - Send with Document" activity. In the to field, I do not have the option of process creator, so I need to find that value and insert. I did the following:
1) used SetValue activity to assign /process_data/creator_id to a variable called strID
2) used UserManagerLookupService to query for user with strID in Universal ID filter box and assign result-User to a variable called creatorUser.
3) used SetValue activity to assign /process_data/creatorUser/object/@email to a variable called creatorEmail
4) used EmailService activity to send email to creatorEmail.
I recorded and played back my process after attempting and it successfully retrieves a universal ID from the creator_id variable, but the UserManagerLookupService returns null users. I have tried with a couple different end users submitting the form and it always comes up null. Is there something wrong wit creator_id?
ThanksHi Jasmin,
I do in fact do assign it to a variable (stringUserID) and then assign it to the "Find User" service operation Universal ID in the filter. It fails there too.
Paul, I have not checked the AWS_Assigned_ID in the data stream. I do see a valid GUID assigned to stringUserID from the creator_ID. So, I guess I need to amend the title of this topic to "UserManagerLookupService.Find User not working".
In fact, I use this same activity in another process, a custom render process, that works just fine. I looked at the GUID for both processes during playback and they are identical. It works fine in the custom render. In this other process, I see an error "Variable: null not found". When I expand the details, I see "com.adobe.workflow.template.document.VariabeNotFoundException: Variable: null not found".
Am I missing something?
Maybe you are looking for
-
How do I use For loop to check each node and import them to a new document?
In my function I would like to use a For loop to get all the statutes (xml) inside the object objXmlBcaResponseDoc. In my case there are 2 statutes. I would like the output to look like the one I have posted here below. I am not sure how to do the Fo
-
What I already suspect from searching around Adobe's support pages. Seems my MacBook Pro 15" 2.2 ghz (just over a year old) is not fully compatible with CS4. It the whole open GL thing. I have the NVIDEA 8600M card which is compatible, but the VRAM i
-
LSMW Handling multiple recordings
Hi Experts, I have a scenario in which i need to run PA40 and PA30 tcode back to back to upload data .I have done two recordings one for pa40 and another for pa30 .I have done this two recordings for one object.Now when i use this in LSMW to upload d
-
My nano ipod will not do anything but flash the apple logo. Help?
I have tried ever diagnostic tool available. Have reset it many times. Have even done every troubleshooting thing it suggests to no avail. I just got it for Xmas and am very frustrated having spent all day yesterday trying to fix it.
-
ERROR when using Integration Monitoring FOR XI
Hello every,after install xi and update the patch to last.when I open Integration Monitoring web page and use xisuper to login. as soon as i click the Component Monitoring or Message Monitoring the system tell me that Following error occurred while