Data in the cube/ ODS?

Hi all,
I would like to ask one simple question. Can someone tell me how to check if infocube/ ODS contains data (instead of checking it by runing reports in BW Analyzer). Thank you.
Best wishes,
John

Hi John,
In RSA1, find your cube or ODS > right click > Manage > Requests tab. Here you can see the data that has been loaded to the object.
You can also move to the contents tab and look at the contents from here, or at least click on Number of records to get an idea of the volume of data.
Or in SE16 > /BI/AYrODS00 for the ODS active data table and /BI/FYrCubefor the cube fact table.
Hope this helps...

Similar Messages

Could not see the data in the cube

Hi all,
Iam trying to load data from one cube to another. Everything is fine but Iam not able to see the data in the new cube.
I created 2 cubes--> Cube A new & cube B new which are copied from existing cubes cube A and Cube B. I need to load data from these new cubes cube Anew & cube B new to another cube (cube C new) which is also a copy of existing cube C. I created update rules and activated them.I tried to load the data into the cube C new. I can see the load to be green but I cannot see the data in the cube C new. it shows 0 records in cube C new. there are records in cube A new & cube B new.
Can anyone plz help me out.
Thanks in advance.
Thanks,
Preethi.

Hi Balu,
I dont know what exactly the problem was but even after the load was successful i could not see any records in the new cube. The source cubes had 60,446 and 7595 records. but the target cube had 0 records.
I ran the program SAP_FACTVIEWS_RECREATE as Bhanu suggested and deleted the data from the new cube(inspite of having 0 records I deleted them). I tried to load the data again which was successful and I could see the data in the new cube.
Hope its clear.
Thanks,
Preethi.

Input ready query is not showing loaded data in the cube

Dear Experts,
In Input ready query we have problem that it is not showing the values which was not entered by throught hat query. Is any settings in input ready query that we can do to populate the loaded data on the cube as well as data entered through Input ready query itself.
Thanks,
Gopi R

Hi,
input ready queries always should display most recent data (i.e. all green and the yellow request). So you can check the status of the requests in the real-time InfoCube. There should exist only green requests and maybe at most one yellow request.
In addition you can try to delete the OLAP cache for the plan buffer query: Use RSRCACHE to do this. The technical names of the plan buffer query can be found as follows:
1. InfoCube\!!1InfoCube, e.g. ZTSC0T003/!!1ZTSC0T003 if ZTSC0T003 is the technical name of the InfoCube
2. MPRO\!!1MPRO, e.g. ZTSC0M002/!!1ZTSC0M002 if ZTSC0M002 is the technical name of the multiprovider
If the input ready query is defined on an aggregation level using a real-time InfoCube, the first case is relevant; if the aggregation level is defined on a multiprovider the second case is relevant. If the input-ready query is defined on a multiprovider containing aggregation levels again the first case is relevant (find the real-time InfoCubes used in the aggregation level).
Regards,
Gregor

Can't view my Cube and Dimension Data with the Cube Viewer

I'm new in using OWB, i'm using Oracle 10g release1 with OWB R2 also Oracle WorkFlow 2.6.3.
When studying with the steps from the OTN pages (start01, flat-file02, relational-wh-03, etl-mappings, deployingobjects, loading-warehouse and bi-modeling)
the loading was success, i guess...
But when I want to see the data in the cube and dimension, an error occurs.
It says
" CubeDV_OLAPSchemaConnectionException_ENT_06952??
CubeDV_OLAPSchemaConnectionException_ENT_06952??
     at oracle.wh.ui.owbcommon.dataviewer.dimensional.DataViewerConnection.connect(DataViewerConnection.java:115)
     at oracle.wh.ui.owbcommon.dataviewer.dimensional.DimDataViewerMain.BIBeansConnect(DimDataViewerMain.java:433)
     at oracle.wh.ui.owbcommon.dataviewer.dimensional.DimDataViewerMain.init(DimDataViewerMain.java:202)
     at oracle.wh.ui.owbcommon.dataviewer.dimensional.DimDataViewerEditor._init(DimDataViewerEditor.java:68)
     at oracle.wh.ui.editor.Editor.init(Editor.java:1115)
     at oracle.wh.ui.editor.Editor.showEditor(Editor.java:1431)
     at oracle.wh.ui.owbcommon.IdeUtils._tryLaunchEditorByClass(IdeUtils.java:1431)
     at oracle.wh.ui.owbcommon.IdeUtils._doLaunchEditor(IdeUtils.java:1344)
     at oracle.wh.ui.owbcommon.IdeUtils._doLaunchEditor(IdeUtils.java:1362)
     at oracle.wh.ui.owbcommon.IdeUtils.showDataViewer(IdeUtils.java:864)
     at oracle.wh.ui.owbcommon.IdeUtils.showDataViewer(IdeUtils.java:851)
     at oracle.wh.ui.console.commands.DataViewerCmd.performAction(DataViewerCmd.java:19)
     at oracle.wh.ui.console.commands.TreeMenuHandler$1.run(TreeMenuHandler.java:188)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:178)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:454)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:100) "
Can somebody explain what is happening, I really don't understand, when the cube viewer window appears, there's no data in it....
I realy need help with this...

I'm new in using OWB, i'm using Oracle 10g release1 with OWB R2 also Oracle WorkFlow 2.6.3.
When studying with the steps from the OTN pages (start01, flat-file02, relational-wh-03, etl-mappings, deployingobjects, loading-warehouse and bi-modeling)
the loading was success, i guess...
But when I want to see the data in the cube and dimension, an error occurs.
It says
" CubeDV_OLAPSchemaConnectionException_ENT_06952??
CubeDV_OLAPSchemaConnectionException_ENT_06952??
at oracle.wh.ui.owbcommon.dataviewer.dimensional.DataViewerConnection.connect(DataViewerConnection.java:115)
at oracle.wh.ui.owbcommon.dataviewer.dimensional.DimDataViewerMain.BIBeansConnect(DimDataViewerMain.java:433)
at oracle.wh.ui.owbcommon.dataviewer.dimensional.DimDataViewerMain.init(DimDataViewerMain.java:202)
at oracle.wh.ui.owbcommon.dataviewer.dimensional.DimDataViewerEditor._init(DimDataViewerEditor.java:68)
at oracle.wh.ui.editor.Editor.init(Editor.java:1115)
at oracle.wh.ui.editor.Editor.showEditor(Editor.java:1431)
at oracle.wh.ui.owbcommon.IdeUtils._tryLaunchEditorByClass(IdeUtils.java:1431)
at oracle.wh.ui.owbcommon.IdeUtils._doLaunchEditor(IdeUtils.java:1344)
at oracle.wh.ui.owbcommon.IdeUtils._doLaunchEditor(IdeUtils.java:1362)
at oracle.wh.ui.owbcommon.IdeUtils.showDataViewer(IdeUtils.java:864)
at oracle.wh.ui.owbcommon.IdeUtils.showDataViewer(IdeUtils.java:851)
at oracle.wh.ui.console.commands.DataViewerCmd.performAction(DataViewerCmd.java:19)
at oracle.wh.ui.console.commands.TreeMenuHandler$1.run(TreeMenuHandler.java:188)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:178)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:454)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:100) "
Can somebody explain what is happening, I really don't understand, when the cube viewer window appears, there's no data in it....
I realy need help with this...

How to check data in the cube

for integration purpose, how can you go and check data in the cube and validate it against the query data ? i know we can go to corresponded infocube and right click "display data" but what's on the query is not available when i execute "display data"
Thanks

You can always use the similar set of Restrictions as used in RKF and get the value very close to what RKF is displaying.
But getting the same values in CKF is a bit tough..I can suggest may be you can take few/1-2 examples and do the calculations manually and compare the query result and Infocube data.

Error while loading data into the cube

Hi,
I loaded data on to PSA and when I am loading the data to the cube through DataTransferProcess, I get an error (red color).
Through "Manage", I could see teh request in red. How do I get to knoe the exact error? Also what could be the possibel reason for this?
Also can some one explain the Datatransfer process(not in process chain)?
Regards,
Sam

Hi Sam
after you load the data through DTP(after click on execute button..) > just go to monitor screen.. in that press the refresh button..> in that it self.. you can find the logs..
otherwise.. in the request screen also.. beside of the request number... you can see the logs icon.. you can click on this..
DTP means..
DTP-used for data transfer process from psa to data target..
check thi link..for DTP:
http://help.sap.com/saphelp_nw04s/helpdata/en/42/f98e07cc483255e10000000a1553f7/frameset.htm
to load data in to the datatargets or infoproviders like DSO, cube....
in your case.. the problem may be.. check the date formats.. special cherectrs... and
REGARDS
@JAY

How to reduce the run time of ABAP code (BADI) when it is reading huge data from BPC Cube and thus writing back huge data to the cube.

Hi All ,
In Case of reading huge amount of record from BPC Cube from BADI code , performing calculations and writing back huge amount of data into the cube , It takes lot of time . If there is any suggestion to read the data from Cube or writing data into the cube using some Parallel Processing methods , Then Please suggest .
Regards,
SHUBHAM

Hi Gersh ,
If we have a specific server say 10.10.10.10 (abc.co.in) on which we are working, Then under RZ12 we make the following entry as :
LOGON GROUP          INSTANCE
parallel_generators        abc.co.in_10         ( Lets assume : The instance number is 10 )
Now in SM59 under ABAP Connections , I am giving the following technical settings:
TARGET HOST          abc.co.in
IP address                  10.10.10.10
Instance number          10
Now if we have a scenario of load balancing servers with following server details (with all servers on different instance numbers ) :
10.10.10.11
10.10.10.13
10.1010.10
10.10.10.15
In this case how can we make the RZ12 settings and SM59 settings such that we don't have to hardcode any IP Address.
If the request is redirected to 10.10.10.11 and not to 10.10.10.10 , in that case how will the settings be.
I have raised this question on the below thread :
How to configure RZ12 and SM59 ABAP connection settings when we have work with Load Balancing servers rather than a specific server .
Regards,
SHUBHAM

Wish to keep always 2 years of data on the cube

Hi Experts,
we wish to keep always 2 years of data on the cube and archive the data after it is 2 years old.
Any thought on this is appreciated.
Thanks,
Varun.

hi Varun,
you can use tcode SARA and 0calyear as selection to archive the cube to flat file or another cube,
for more detail please follow this how to archive in bw doc
https://websmp108.sap-ag.de/~sapdownload/011000358700000085572002E/HowToArchiveinBW.doc
hope this helps.

Date when the cube was filled with data for the last time

Hi!
We are using a SAP BW System and on top of it BOBJ for reporting. Within BEx Web Application Designer, it's very simple to access the data, when the cube was filled with data for the last time. Is it possible to access this information within BOBJ, too?
Thanks for your help!
Greetings
Stefan

Hallo Ingo,
thanks for your answer. That was exactly what we were looking for.
We will have to think about a workaround now.
Greetings
Stefan

Infospke not pulling data from the cube

Hi,
Though there is data in the cube ,when I say start extraction the infospoke is pulling zero records .But I see a file created but I am not able to see the data.In the monitor it says 0 record extracted.
I have done this first time in the new upgrade system where I changed the server name.
Thanks

Hi,
Check out the layout definition(Data column) for the corresponding planning level and also you can check the planning area value whether it corresponds to your cube name ..
Also make a cross check with the listcube for your corresponding restriction which you have made in planning level..
Regards,
Siva.

Show only logged in User Data from the cube

Hi,
Suppose I have couple of customers' data in the cube. And these customers are some BW users. Now, i wish my query should display data only for the customer/user who has logged in. The query could be created by any user.
Is this possible in a web report?
regards,
Sam

Hi
Refer this thread
Re: query execution statistics
The query execution statistics can be fetched from the relevant table that acts as source for your query
Regards
N Ganesh

Deleting Data from the cube

Is there any function module which drops all the data from the cube?
Or is there a function module which deletes all the requests from the cube?
Thanks.

Hello,
Check one of the foll:
RSAPO_DELETE_CUBE
RSAPOADM_CLEANUP_CUBE
RSAR_DELETE_ICUBE
RSAU_INFOCUBE_CONTENT_DELETE
RSDG_CUBE_DELETE
RSDPC_DROP_CUBE
RSDPM_DB_CLEANUP_CUBE
RSDPTEST_MOLAP_CUBE_CLEANUP
RSDPW_INFOCUBE_DELETE_ALL_DATA
RSDPW_INFOCUBE_DELETE_DATA
RSDPW_INFOCUBE_DROP
RSDP_MDMETA_ICUBE_DROP
Regds,
Shashank

How to find the date when the cube was created

Hi gurus
I just want to find out the date when the cube was created,
Regards
Kumar

Kumar,
Go to table RSDCUBE, you can see date there.
Hope it helps,
Sam

Data in the cube is showing multiple entries when compared with ODS

Hello BW Gurus,
We have a waste report in production planning on Cube and ODS separately. The same info package loads both targets (which means same infosource) but when we run a report on Cube, the records are showing multiple entries (i.e. Key Figures are not matching when compared to ODS) where as the ODS records are showing correctly as it was in R/3. There are totally 6 key figures out of which 4 pulled from R/3 and 2 are populated in BW.
An Example:
Waste report in PP run for plant 1000 for 12/2005 and process order 123456. The operational scrap should be 2.46% and the component scrap should be 3.00% for material 10000000. The report is showing 7.87% for planned operational waste % and 9.6% for planned component waste %. These values are not correct. The ODS values for order 123456 matched the data in R/3 for component and operational scrap.
There is a Start routine to the ODS and also to the cube. I am not good at ABAP so requesting your Help.
Here is the ODS Code:
tables: /BI0/PPRODORDER.
loop at data_package.
select single COORD_TYPE
PRODVERS
into (/BI0/PPRODORDER-COORD_TYPE,
/BI0/PPRODORDER-PRODVERS)
from /BI0/PPRODORDER
where PRODORDER = data_package-PRODORDER
and OBJVERS = 'A'.
if sy-subrc = 0.
if /BI0/PPRODORDER-COORD_TYPE = 'XXXX'
or /BI0/PPRODORDER-COORD_TYPE = 'YYYY'.
data_package-PRODVERS = space.
else.
data_package-PRODVERS = /BI0/PPRODORDER-PRODVERS.
endif.
endif.
if data_package-calday = space
or data_package-calday = '00000000'.
if data_package-TGTCONSQTY NE 0.
data_package-calday = data_package-ACTRELDATE.
endif.
endif.
modify data_package.
endloop.
Here is Cube Code:
tables: /BI0/PPRODORDER,
/BIC/ODS.
TYPES:
BEGIN OF ys_mat_unit,
material TYPE /bi0/oimaterial,
mat_unit TYPE /bi0/oimat_unit,
numerator TYPE /bi0/oinumerator,
denomintr TYPE /bi0/oidenomintr,
END OF ys_mat_unit.
DATA:
l_s_mat_unit TYPE ys_mat_unit,
e_factor type p decimals 5.
loop at data_package.
select single COORD_TYPE
PRODVERS
into (/BI0/PPRODORDER-COORD_TYPE,
/BI0/PPRODORDER-PRODVERS)
from /BI0/PPRODORDER
where PRODORDER = data_package-PRODORDER
and OBJVERS = 'A'.
if sy-subrc = 0.
if /BI0/PPRODORDER-COORD_TYPE = 'XXX'
or /BI0/PPRODORDER-COORD_TYPE = 'YYY'.
data_package-PRODVERS = space.
else.
data_package-PRODVERS = /BI0/PPRODORDER-PRODVERS.
endif.
endif.
if data_package-calday = space
or data_package-calday = '00000000'.
if data_package-TGTCONSQTY NE 0.
data_package-calday = data_package-ACTRELDATE.
endif.
endif.
data_package-agsu = 'GSU'.
data_package-agsu_qty = 0.
select single gr_qty
base_uom
into (/BIC/ODS-gr_qty,
/BIC/ODS-base_uom)
from /BIC/ODS
where prodorder = data_package-prodorder
and material = data_package-material.
if sy-subrc = 0.
if /BIC/ODS-base_uom = 'GSU'.
data_package-agsu_qty = /BIC/ODS-gr_qty.
else.
SELECT SINGLE * FROM /bi0/pmat_unit
INTO CORRESPONDING FIELDS OF l_s_mat_unit
WHERE material = data_package-material
AND mat_unit = 'GSU'
AND objvers = 'A'.
IF sy-subrc = 0.
IF l_s_mat_unit-denomintr <> 0.
e_factor = l_s_mat_unit-denomintr /
l_s_mat_unit-numerator.
multiply /BIC/ODS-gr_qty by e_factor.
data_package-agsu_qty = /BIC/ODS-gr_qty.
ENDIF.
else.
CALL FUNCTION 'UNIT_CONVERSION_SIMPLE'
EXPORTING
INPUT = /BIC/ODS-gr_qty
NO_TYPE_CHECK = 'X'
ROUND_SIGN = ' '
UNIT_IN = /BIC/ODS-base_uom
UNIT_OUT = 'GSU'
IMPORTING
OUTPUT = DATA_PACKAGE-gsu_qty
EXCEPTIONS
CONVERSION_NOT_FOUND = 1
DIVISION_BY_ZERO = 2
INPUT_INVALID = 3
OUTPUT_INVALID = 4
OVERFLOW = 5
TYPE_INVALID = 6
UNITS_MISSING = 7
UNIT_IN_NOT_FOUND = 8
UNIT_OUT_NOT_FOUND = 9
OTHERS = 10.
endif.
endif.
endif.
modify data_package.
endloop.
some how the AGSU qyt is not populating in the cube and when I dbug the code, I could see a clean record in the internal table but not in the cube.
your suggestion and solutions would be highly appreciated.
thanks,
Swathi.

Hi Swathi
In ODs we have option of overwriting and addition however in Cube we have only adition.Thats why you are getting multiple enteries.
If you are running daily full load on the cube then please delete the earlier requests.
So at one point of time there should be only one full load request in cube. Hope this will solve your problem.
Regards,
Monika

Data in the cube is showing wrong when compared with ODS

Hello BW Gurus,
We have a waste report in production planning on Cube and ODS separately. The same info package loads both targets (which means same infosource) but when we run a report on Cube, the records are showing multiple entries (i.e. Key Figures are not matching when compared to ODS) where as the ODS records are showing correctly as it was in R/3. There are totally 6 key figures out of which 4 pulled from R/3 and 2 are populated in BW.
An Example:
Waste report in PP run for plant 1000 for 12/2005 and process order 123456. The operational scrap should be 2.46% and the component scrap should be 3.00% for material 10000000. The report is showing 7.87% for planned operational waste % and 9.6% for planned component waste %. These values are not correct. The ODS values for order 123456 matched the data in R/3 for component and operational scrap.
There is a Start routine to the ODS and also to the cube. I am not good at ABAP so requesting your Help.
Here is the ODS Code:
tables: /BI0/PPRODORDER.
loop at data_package.
 select single COORD_TYPE
 PRODVERS
 into (/BI0/PPRODORDER-COORD_TYPE,
 /BI0/PPRODORDER-PRODVERS)
 from /BI0/PPRODORDER
 where PRODORDER = data_package-PRODORDER
 and OBJVERS = 'A'.
 if sy-subrc = 0.
 if /BI0/PPRODORDER-COORD_TYPE = 'XXXX'
 or /BI0/PPRODORDER-COORD_TYPE = 'YYYY'.
 data_package-PRODVERS = space.
 else.
 data_package-PRODVERS = /BI0/PPRODORDER-PRODVERS.
 endif.
 endif.
 if data_package-calday = space
 or data_package-calday = '00000000'.
 if data_package-TGTCONSQTY NE 0.
 data_package-calday = data_package-ACTRELDATE.
 endif.
 endif.
 modify data_package.
endloop.
Here is Cube Code:
tables: /BI0/PPRODORDER,
 /BIC/ODS.
TYPES:
BEGIN OF ys_mat_unit,
 material TYPE /bi0/oimaterial,
 mat_unit TYPE /bi0/oimat_unit,
 numerator TYPE /bi0/oinumerator,
 denomintr TYPE /bi0/oidenomintr,
END OF ys_mat_unit.
DATA:
 l_s_mat_unit TYPE ys_mat_unit,
 e_factor type p decimals 5.
loop at data_package.
 select single COORD_TYPE
 PRODVERS
 into (/BI0/PPRODORDER-COORD_TYPE,
 /BI0/PPRODORDER-PRODVERS)
 from /BI0/PPRODORDER
 where PRODORDER = data_package-PRODORDER
 and OBJVERS = 'A'.
 if sy-subrc = 0.
 if /BI0/PPRODORDER-COORD_TYPE = 'XXX'
 or /BI0/PPRODORDER-COORD_TYPE = 'YYY'.
 data_package-PRODVERS = space.
 else.
 data_package-PRODVERS = /BI0/PPRODORDER-PRODVERS.
 endif.
 endif.
 if data_package-calday = space
 or data_package-calday = '00000000'.
 if data_package-TGTCONSQTY NE 0.
 data_package-calday = data_package-ACTRELDATE.
 endif.
 endif.
 data_package-agsu = 'GSU'.
 data_package-agsu_qty = 0.
 select single gr_qty
 base_uom
 into (/BIC/ODS-gr_qty,
 /BIC/ODS-base_uom)
 from /BIC/ODS
 where prodorder = data_package-prodorder
 and material = data_package-material.
 if sy-subrc = 0.
 if /BIC/ODS-base_uom = 'GSU'.
 data_package-agsu_qty = /BIC/ODS-gr_qty.
 else.
 SELECT SINGLE * FROM /bi0/pmat_unit
 INTO CORRESPONDING FIELDS OF l_s_mat_unit
 WHERE material = data_package-material
 AND mat_unit = 'GSU'
 AND objvers = 'A'.
 IF sy-subrc = 0.
 IF l_s_mat_unit-denomintr <> 0.
 e_factor = l_s_mat_unit-denomintr /
 l_s_mat_unit-numerator.
 multiply /BIC/ODS-gr_qty by e_factor.
 data_package-agsu_qty = /BIC/ODS-gr_qty.
 ENDIF.
 else.
 CALL FUNCTION 'UNIT_CONVERSION_SIMPLE'
 EXPORTING
 INPUT = /BIC/ODS-gr_qty
 NO_TYPE_CHECK = 'X'
 ROUND_SIGN = ' '
 UNIT_IN = /BIC/ODS-base_uom
 UNIT_OUT = 'GSU'
 IMPORTING
 OUTPUT = DATA_PACKAGE-gsu_qty
 EXCEPTIONS
 CONVERSION_NOT_FOUND = 1
 DIVISION_BY_ZERO = 2
 INPUT_INVALID = 3
 OUTPUT_INVALID = 4
 OVERFLOW = 5
 TYPE_INVALID = 6
 UNITS_MISSING = 7
 UNIT_IN_NOT_FOUND = 8
 UNIT_OUT_NOT_FOUND = 9
 OTHERS = 10.
 endif.
 endif.
 endif.
 modify data_package.
endloop.
some how the AGSU qyt is not populating in the cube and when I dbug the code, I could see a clean record in the internal table but not in the cube.
your suggestion and solutions would be highly appreciated.
thanks,
Swathi.

Hi Swathi,
May be you might want to look into the way the % is being calculated in the cube. If the formula involves counting the no. of records, then you will also be counting the -ve records that are posted in the cube unless you have had a compression on the cube. that might give you wrong numbers.
Doniv

Data in the cube/ ODS?

Similar Messages

Maybe you are looking for