Data inconsistency: Area 30 for value takeover is missing

Hi Experts,
I am trying to enter Asset Transaction: Asset Sale Without Customer (ABAON) but I am getting the error below:
Data inconsistency: Area 30 for value takeover is missing
Message no. AAPO105
Diagnosis
According to its formula, depreciation area 31 is defined for mandatory takeover of values from depreciation area 30. However, depreciation area 30 was not posted during the current transaction (chart of depreciation MY01). This is not allowed.
Procedure
Check the specifications for the current transaction type.
I have checked OAYZ configuration. Area 30 does not have a 'Deactivate' tick on it. What does the Deactivate tick mean? If I need to change and tick it, how do I so since it is grayed out?
I hope someone can help me out with this.
Thanks,
Josef

Hi Josef,
This might be due to new depreciation area addition recently, is it ?
For the message in AFBN,
Depreciation area  that you entered in chart of depreciation cannot be processed, as this program can only process real depreciation areas and not derived areas.
If it is a derived depreciation area then this program not works.
Based on initial error message it appears 31 is deriving values from 30. You might have run AFBN for area 30. Please check what the parameters in area 30. Some time dep.area defined as derived can be a real dep.area if it is the differences derived value from other dep.areas.
In that case please check the link back where exactly the values should come and flow.
Regards

Similar Messages

  • Error:Data inconsistency: Area 10 for value takeover is missing

    Hi,
    I am posting AUC settlement thro T code AIBU from one AUC asset to other asset and i am getting below error.
    Data inconsistency: Area 10 for value takeover is missing
    Message no. AAPO 105
    Diagnosis
    According to its formula, depreciation area 33 is defined for mandatory takeover of values from depreciation area 10. However, depreciation area 10 was not posted during the current transaction (chart of depreciation PE1). This is not allowed.
    Procedure
    Check the specifications for the current transaction type.
    I do not understand why this error message is appearing.
    When i checked both the asset master does not have Depreciation area 10. But it activated in configuration. Is it possible to add the dep area 10 in asset master now?
    regards
    Suri

    Hi,
    I tried executing AFBN for Dep area 10, system throwing pop up message as"Define depreciation area correctly". The detailed information in POP is as given below.
    Define depreciation area correctly
    Message no. AU008
    Diagnosis
    Depreciation area 10, which you want to create as a new depreciation area in chart of depreciation PE1, has no depreciation area defined for value takeover. This may be be correct for normal operation, however for the purposes of creating a new depreciation in the productive system, you have to enter a depreciation area whose values are used as base values for the new area.
    Procedure
    In FI-AA Customizing, please check the value takeover rules for the depreciation area you are creating.
    In config, there are totally 4 dep areas, 01,10,31 & 33 and which has defined as default dep areas in asset master, but when i try to create a new asset asset, in dep area tab, the default dep area are appearing only 01, 31 & 33. Dep area 10 is not showing,
    Please tell me what could be reason, for throwing error in AFBN and why dep area 10 is not appearing while creating new asset master.
    regards
    Suri

  • How are objects and values passed in rmi?

    how are objects and values passed in rmi?

    In java there are two mwthods of passing aruguments and returning results.
    1) by value
    2) by reference.
    While invoking local methods, java passes primitive types by value and objects by reference.
    However while invoking remote methods both these data types are passed by value. Except for the objects being exported. Reason being two different JVM's are involved and thus memory addresses references of one are meaningles for the other. However "pass by value" for values of type object are implemented as deep copy.

  • Value date is not maintained for payroll area 08

    Dear all,
    I am facing this error Value date is not maintained for payroll area 08 while executing Transaction
    PC00_M08_CALC.
    Please let me know how to rectify this error?
    Thanks
    Best regards,
    Smita

    Hi Shruti,
    Please find the attached screen shot of the error.
    Thanks
    Smita

  • The values for list items of other data blocks are not getting displayed when executed.

    Hi,
        I have a new problem again.
        I am doing a new form in which there are around 8 blocks. All the blocks have their tables in the oracle database.
        Each block has 18 columns with the same column & column names. But the values in those columns are different & the values do not match.
        The problem lies while i execute the form, it populates only the first block data. Other blocks do not display or populate the values.
        I cannot create a master relationship because all the column values are different.
        How do i display or populate the values of all the tables?
       Please help me. Thank You.

    hi
    if your form has truly disassociated tables, then you could simply use a key-exeqry trigger at forms level to travel to each block in turn and perform an execute-query built-in, eventually returning to the starting block.
    ie
    go_block('..');
    execute_query;
    go_block('..');
    execute_query;
    etc
    go_item(......);
    In this case you would use the block where clause to constrain each table to the appropriate set.
    If however, the database has no relationships between the tables but the data content has some corelation, then you could craft a forms relation manually.
    cheers
    Rod

  • What are the different values available for type attribute

    Hi,
        I am working with IDOC to Stored Procedure. For each field we need to give the values for 'isInput' and 'type' attributes. I need to pass values for 'datetime' and 'numeric' fields. What are the list of values availabIe for 'type' attribute. I know only about 'CHAR' attribute.
         Can anybody please tell me what all the values availabe for attribute 'type'. I am facing this problem while giving the value for type attribute.
    Thanks in Advance,
    Murthy.

    Does this help
    tring
        Data that contains a combination of letters, numbers, and special characters. String data types are listed below:
    CHARACTER: Fixed-length character strings. The common short name for this data type is CHAR.
    VARCHAR: Varying-length character strings.
    CLOB: Varying-length character large object strings, typically used when a character string might exceed the limits of the VARCHAR data type.
    GRAPHIC: Fixed-length graphic strings that contain double-byte characters.
    VARGRAPHIC: Varying-length graphic strings that contain double-byte characters.
    DBCLOB: Varying-length strings of double-byte characters in a large object.
    |BINARY: A sequence of bytes that is not associated with a |code page.
    |VARBINARY: Varying-length binary strings.
    BLOB: Varying-length binary strings in a large object.
    |XML: Varying-length string that is an internal representation |of XML.
    Numeric
        Data that contains digits. Numeric data types are listed below:
    SMALLINT: for small integers.
    |INTEGER: for large integers.
    |BIGINT: for bigger values.
    DECIMAL(p,s) or NUMERIC(p,s), where p is precision and s is scale: for packed decimal numbers with precision p and scale s. Precision is the total number of digits, and scale is the number of digits to the right of the decimal point.
    |DECFLOAT: for decimal floating-point numbers.
    REAL: for single-precision floating-point numbers.
    DOUBLE: for double-precision floating-point numbers.
    Datetime
        Data values that represent dates, times, or timestamps. Datetime data types are listed below:
    DATE: Dates with a three-part value that represents a year, month, and day.
    TIME: Times with a three-part value that represents a time of day in hours, minutes, and seconds.
    TIMESTAMP: Timestamps with a seven-part value that represents a date and time by year, month, day, hour, minute, second, and microsecond.
    Regards
    Ravi

  • Date fields are showing as  /  /   in DSO for blank dates or no dates

    We are loading flat file data to DSO and the date fields are showing as  /  /   in DSO for blank dates or no dates in the flat file source system.  We don't want to see this / /  and instead of this, we would want to this field in DSO to be in blank. Please help how to achieve this. Is there any way to do this transformation. If yes, then can you please provide  the sample coding.
    Advance Thanks,
    Christy

    I have added the code and data loading is successful. while DSO activation, it is failing. The error message is,
    Value '#' of characteristic 0DATE is not a number with 000008 spaces.
    It seems that we need to change the code. Can you provide me the corrected code please. Thanks.
    Christy

  • Using MISSING FIELD VALUES ARE NULL for external table

    I want to place a null for values missing in the sub_account field. Here is my external table:
    CREATE OR REPLACE DIRECTORY INCOMING_ORDERS_log_dir
    AS 'c:\starpubs\starpubs\dataformats\logs\INCOMING_ORDERS\log';
    CREATE OR REPLACE DIRECTORY INCOMING_ORDERS_bad_dir
    AS 'c:\starpubs\starpubs\dataformats\logs\INCOMING_ORDERS\bad';
    create table ext_INCOMING_ORDERS_table (
    Account varchar(5),
    Sub_Account varchar(1),
    Override_Code varchar(1),
    Nomenclature varchar(28),
    chg_nbr varchar(3),
    quantity integer,
    U_I varchar(5),
    zipcode varchar(5),
    type_reject varchar(2)
    organization external
    type oracle_loader
    default directory user_dir
    access parameters
    records delimited by newline
    missing field values are null
    badfile INCOMING_ORDERS_bad_dir:'INCOMING_ORDERS%a_%p.bad'
    logfile INCOMING_ORDERS_log_dir:'INCOMING_ORDERS%a_%p.log'
    fields
    Account(1:5) char(5),
    Sub_Account(7:7) char(1),
    Override_Code(10:10) char(1),
    Nomenclature(11:38) char(28),
    chg_nbr(40:42) char(3),
    quantity(44:48) integer external,
    U_I(50:54) char(5),
    zipcode(56:60) char(5),
    type_reject(61:62) char(2)
    location('PTCLICK.MANUAL.NOMEN.TXT','PTCLICK.ORDERS.TXT', 'EUR_RES.TXT', 'MQ.TXT', 'BPRO.TXT')
    reject limit unlimited;
    How can I place the MISSING FIELD VALUES ARE NULL for missing values for the sub_account?

    made the change I received this error:
    SQL> select * from ext_INCOMING_ORDERS_table;
    select * from ext_INCOMING_ORDERS_table
    ERROR at line 1:
    ORA-29913: error in executing ODCIEXTTABLEOPEN callout
    ORA-29400: data cartridge error
    KUP-00554: error encountered while parsing access parameters
    KUP-01005: syntax error: found "no": expecting one of: "comma, date_format,
    defaultif, enclosed, ltrim, lrtrim, ldrtrim, notrim, nullif, optionally, ),
    rtrim, terminated"
    KUP-01007: at line 7 column 26
    CREATE OR REPLACE DIRECTORY INCOMING_ORDERS_log_dir
    AS 'c:\starpubs\starpubs\dataformats\logs\INCOMING_ORDERS\log';
    CREATE OR REPLACE DIRECTORY INCOMING_ORDERS_bad_dir
    AS 'c:\starpubs\starpubs\dataformats\logs\INCOMING_ORDERS\bad';
    create table ext_INCOMING_ORDERS_table (
    Account varchar(5),
    Sub_Account varchar(1),
    Override_Code varchar(1),
    Nomenclature varchar(28),
    chg_nbr varchar(3),
    quantity integer,
    U_I varchar(5),
    zipcode varchar(5),
    type_reject varchar(2)
    organization external
    type oracle_loader
    default directory user_dir
    access parameters
    records delimited by newline
    badfile INCOMING_ORDERS_bad_dir:'INCOMING_ORDERS%a_%p.bad'
    logfile INCOMING_ORDERS_log_dir:'INCOMING_ORDERS%a_%p.log'
    fields
    Account(1:5) char(5),
    Sub_Account(7:7) char(1) NO PRESERVE BLANKS,
    Override_Code(10:10) char(1),
    Nomenclature(11:38) char(28),
    chg_nbr(40:42) char(3),
    quantity(44:48) integer external,
    U_I(50:54) char(5),
    zipcode(56:60) char(5),
    type_reject(61:62) char(2)
    location('PTCLICK.MANUAL.NOMEN.TXT','PTCLICK.ORDERS.TXT', 'EUR_RES.TXT', 'MQ.TXT', 'BPRO.TXT')
    reject limit unlimited;

  • Are Cube organized materialized view with Year to Date calculated measure eligible for Query Rewrite

    Hi,
    Will appreciate if someone can help me with a question regarding Cube organized MV (OLAP).
    Does cube organized materialized view with calculated measures based on time series  Year to date, inception to date  eg.
    SUM(FCT_POSITION.BASE_REALIZED_PNL) OVER (HIERARCHY DIM_CALENDAR.CALENDAR BETWEEN UNBOUNDED PRECEDING AND CURRENT MEMBER WITHIN ANCESTOR AT DIMENSION LEVEL DIM_CALENDAR."YEAR")
    are eligible for query rewrites or these are considered advanced for query rewrite purposes.
    I was hoping to find an example with YTD window function on physical fact dim tables  with optimizer rewriting it to Cube Org. MV but not much success.
    Thanks in advance

    I dont think this is possible.
    (My own reasoning)
    Part of the reason query rewrite works for base measures only (not calc measures in olap like ytd would be) is due to the fact that the data is staged in olap but its lineage is understandable via the olap cube mappings. That dependency/source identification is lost when we build calculated measures in olap and i think its almost impossible for optimizer to understand the finer points relating to an olap calculation defined via olap calculation (olap dml or olap expression) and also match it with the equivalent calculation using relational sql expression. The difficulty may be because both the olap ytd as well as relational ytd defined via sum() over (partition by ... order by ...) have many non-standard variations of the same calculation/definition. E.g: You can choose to use or choose not to use the option relating to IGNORE NULLs within the sql analytic function. OLAP defn may use NASKIP or NASKIP2.
    I tried to search for query rewrite solutions for Inventory stock based calculations (aggregation along time=last value along time) and see if olap cube with cube aggregation option set to "Last non-na hierarchical value" works as an alternative to relational calculation. My experience has been that its not possible. You can do it relationally or you can do it via olap but your application needs to be aware of each and make the appropriate backend sql/call. In such cases, you cannot make olap (aw/cubes/dimensions) appear magically behind the scenes to fulfill the query execution while appearing to work relationally.
    HTH
    Shankar

  • Data Source Level SRS (SSRS) Issue - Permissions granted to user... are insufficient for performing this operation. (rsAccessDenied)

    I've inherited a bit of a security issue and would appreciate any insight.  
    The bottom line is that I have a user than can run one report from folder "X", but not the report next to it.
    Here is the problem context.  The names are changed to protect the innocent.  Sharepoint is not involved.
    The SSRS Home Folder has Security "Group or User" of "DomainX\SSRS_Browsers"   with Role(s) "Browser"
    "SSRS_Browsers" is an AD group.  The user with the issue (DomainX\UnhappyUser) is a member of this group.
    The user is able to navigate to folder "X" (one level below Home) and run Report "A" successfully.  But, when they try to run report "B", they get: 
    "An error has occurred during report processing. (rsProcessingAborted)  The permissions granted to user "DomainX\UnhappyUser" are insufficient for performing this operation. (rsAccessDenied)
    The difference between report "A" that works, and report "B" that doesn't is that report "B" references a data set from a different data source.
    Both reports reference DataSource1.  The failing report additionally references DataSource2.   The SSRS logs confirm this is where the problem is:
    ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: , Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'DomainX\UnhappyUser' are insufficient for performing this operation.;
    processing!ReportServer_0-34!c58!07/16/2014-16:45:41:: e ERROR: An exception has occurred in data set 'DataSource2'. blah blah blah
    Both data sources have "stored" credentials with the same AD user: "DomainX\SSRS_Reports".  Both data sources reference the same instance of SQL Server.  They do have different "Initial Catalog" values.  (DatabaseA
    and DatabaseB).  I can run both reports successfully, but I more authority.
    "SSRS_Reports" is defined as a "Login" user under "Security" in SSMS at the instance level.  The Server Role is "public".
    DatabaseA (which is behind the data source that works) has Security->Users->DomainX\DataBaseA_Readers.   This is an AD group, that includes has "SSRS_Reports" as a member.
    DataBaseA_readers (in SQL Server, at the DatabaseA level) is a member of role db_datareader.
    DataBaseB (which is behind the data source that fails) has Security->Users->DomainX\DataBaseB_Readers.  This is also an AD group, that includes "SSRS_Reports" as a member.
    DataBaseA_readers (in SQL Server, at the DatabaseB level) is a member of role db_datareader.
    Does anyone have any insights as to where my problem may be?
    Thank you.  Sorry for the verbosity.  

    Hi Steve,
    After testing the issue in my local environment, I can reproduce it. The Home Folder has Security for "DomainX\SSRS_Browsers" group with "Browser" Role, the folder “X” and Report “A” security is inherited from its parent item, but the Report “B” Item security
    is not inherited from its parent item. In this way, the DomainX\UnhappyUser has insufficient permission to render the Report “B”.
    So, please try to check the Security page of Report “B” and compare it with Report “A” security settings. If possible, we can click “Revert to Parent Security” button to replace all the defined security settings with the security settings of its parent folder
    ”X”.
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Data inconsistency: Parallel depr. area is not posted

    Dear friends,
    When user posting depreciation
    Depreciation areas are not posted for asset class 2000 in conpany code AO01 its not updated, i am getting an error when posting a fixed asset on above class when using t.code ABZON
    ERROR IS  Data inconsistency: Parallel depr. area is not posted
    may i know what is the reasion?
    Please help me on this issue
    Thanks in advance

    Go to OAYZ, select the required Asset Class and deactivate the depreciation area.
    thanks
    G. Lakshmipathi

  • Data Inconsistency for 0EMPLOYEE between ECC and BI

    Hi,
    We do a full load to 0EMPLOYEE using 0EMPLOYEE_ATTR from ECC. There were records deleted for lot of employees (some action types) in ECC. This has caused data inconsistency for 0EMPLOYEE master data (time-dependent) between ECC and BI. In BI we have more records for these employees (Additional records have time-dependent range that were deleted from ECC but still exist in BI). These employee records are already being used in lot of InfoProviders. Is there an efficient way to fix this issue? One of the solution is to delete data from all InfoProviders and then delete from Master data for 0EMPLOYEE, but the deletion of employee records can happen quite often, so we don't want to take this route. Also, I tried to re-organize master data attributes for 0EMPLOYEE through process chain, but that didn't work either.
    Message was edited by:
            Ripel Desai

    Hi Ripel,
    I share your pain. This is one of the real pains of Time-Dependant master data in BW. I have been in your exact position and the only way round the issue for me was to clear out all the cubes that used 0EMPLOYEE and then delete and re-load 0EMPLOYEE data.
    I know this responce doesn't help you but at least you are not alone.
    Regards,
    Pete
    http://www.teklink.co.uk

  • Data inconsistency: Parallel depr. area is not posted  - while doing F-90

    Dear All,
    While doing F-90 with transaction type 100  i am getting below error kidly suggest me if any thing is missing.
    Error- Data inconsistency: Parallel depr. area is not posted
              Message no. AAPO104
    Diagnosis
    For chart of depreciation 1000, you defined this area (or these areas) as parallel depreciation areas for depreciation area 01. In the current transaction, however, not all of these areas are posted. This is not allowed.
    Procedure
    Check if the transaction type is limited to certain depreciation areas. If there is such a limitation, add the missing depreciation areas for the transaction type.
    Check if the asset that is being posted manages all these depreciation areas.
    Regards,
    Sahil

    Dear expert
        please read OSS note :Check note 67688
       210557 Mass retiremt w/ revenue in case of parallel crcies
      124231 AAPO104 w/o reason in intercompany asset transfer
       97388 Asset transfer: Problems with parallel areas
    Regards
       Ajeesh.s

  • Data Inconsistency: Parallel Dep area is not posted Message no. AAPO104

    Team
    Could you please help on this.
    We tried settling a PS to Asset for AUC T code CJ88 but recd error message Data Inconsistency: Parallel Dep area is not posted Message no. AAPO104.
    Dep area are maintained correctly, parallel currencies & Dep area setting for that are maintained correctly, in Customising conssistency check no error.
    but it is not settling, could you please let me know if I have missed something.
    Transaction type is also not limited to any Dep area.
    Regards
    Ajay

    what should be checked in TOBJ
    This table basically relates to User-defined (additional to SAP-defined) objects are documented.  So you need to check with your basis.  Otherwise, for the error message you indicated, only three notes are available which has already been indicated above.
    thanks
    G. Lakshmipathi

  • Basic / Scheduling dates are calculated for both main orders and Collective

    How the Basic / Scheduling dates are calculated for both main orders and Collective orders?
    when in master data we have given different value of in house production time for both the orders.

    Hi,
    The basic dates are calculated from the data mentioned in the Material Master - In-house production time days, either lot size dependent or lot size independent.
    The scheduled dates are calculated from the timings maintained in the routing.
    In the configuration for Scheduling parameters for the order type - Adjust scheduling - the dates can be adjusted.
    Kindly revert back if you need any further clarifications.
    Warm regards,
    Umesh Poojari

Maybe you are looking for