Error:Data inconsistency: Area 10 for value takeover is missing

Hi,
I am posting AUC settlement thro T code AIBU from one AUC asset to other asset and i am getting below error.
Data inconsistency: Area 10 for value takeover is missing
Message no. AAPO 105
Diagnosis
According to its formula, depreciation area 33 is defined for mandatory takeover of values from depreciation area 10. However, depreciation area 10 was not posted during the current transaction (chart of depreciation PE1). This is not allowed.
Procedure
Check the specifications for the current transaction type.
I do not understand why this error message is appearing.
When i checked both the asset master does not have Depreciation area 10. But it activated in configuration. Is it possible to add the dep area 10 in asset master now?
regards
Suri

Hi,
I tried executing AFBN for Dep area 10, system throwing pop up message as"Define depreciation area correctly". The detailed information in POP is as given below.
Define depreciation area correctly
Message no. AU008
Diagnosis
Depreciation area 10, which you want to create as a new depreciation area in chart of depreciation PE1, has no depreciation area defined for value takeover. This may be be correct for normal operation, however for the purposes of creating a new depreciation in the productive system, you have to enter a depreciation area whose values are used as base values for the new area.
Procedure
In FI-AA Customizing, please check the value takeover rules for the depreciation area you are creating.
In config, there are totally 4 dep areas, 01,10,31 & 33 and which has defined as default dep areas in asset master, but when i try to create a new asset asset, in dep area tab, the default dep area are appearing only 01, 31 & 33. Dep area 10 is not showing,
Please tell me what could be reason, for throwing error in AFBN and why dep area 10 is not appearing while creating new asset master.
regards
Suri

Similar Messages

  • Data inconsistency: Area 30 for value takeover is missing

    Hi Experts,
    I am trying to enter Asset Transaction: Asset Sale Without Customer (ABAON) but I am getting the error below:
    Data inconsistency: Area 30 for value takeover is missing
    Message no. AAPO105
    Diagnosis
    According to its formula, depreciation area 31 is defined for mandatory takeover of values from depreciation area 30. However, depreciation area 30 was not posted during the current transaction (chart of depreciation MY01). This is not allowed.
    Procedure
    Check the specifications for the current transaction type.
    I have checked OAYZ configuration. Area 30 does not have a 'Deactivate' tick on it. What does the Deactivate tick mean? If I need to change and tick it, how do I so since it is grayed out?
    I hope someone can help me out with this.
    Thanks,
    Josef

    Hi Josef,
    This might be due to new depreciation area addition recently, is it ?
    For the message in AFBN,
    Depreciation area  that you entered in chart of depreciation cannot be processed, as this program can only process real depreciation areas and not derived areas.
    If it is a derived depreciation area then this program not works.
    Based on initial error message it appears 31 is deriving values from 30. You might have run AFBN for area 30. Please check what the parameters in area 30. Some time dep.area defined as derived can be a real dep.area if it is the differences derived value from other dep.areas.
    In that case please check the link back where exactly the values should come and flow.
    Regards

  • ERROR OGG-01148 programming error, data type not supported for column

    I am getting following error when I put null in insert statement
    2011-03-31 18:30:45 ERROR OGG-01148 programming error, data type not supported for column TXID in table advoss.tblaudittrail.
    I am replicating MySQL 5.5.9 to Oracle 11g rel2 via goldengate 11

    I am able to diagnose what is cuasing the problem
    unsigned flag was the culprit of this error
    I am able to insert null after removing unsigned flag.
    thank you very much for your kind support

  • Error "Data packet not complete; for example, 000013" when reading from PSA

    Dear all,
    I have an issue with my data loading, when i execute my infopackage, i specify that it should be loaded into PSA before going to the data target. in my infopackage request i notice that i have got missing data package
    e.g.
    Data package 1 : everything OK
    Data package 2 : everything OK
    Data package 3 : everything OK
    Data package 8 : everything OK
    Data package 10 : everything OK
    Data package 12 : everything OK
    Data package 13 : everything OK
    what happen to data package inbetween e.g. DP4, DP5 etc etc?
    In my "step by step analysis" under the status tab everything is green and nothing seem to have went wrong, no short dump, no job cancelled, nothing.
    Since everything "seems" to be alright, when i try to update subsequently to the data target, i get the following errors below.
    Data packet not complete; for example, 000013
    Request has errors / is incomplete
    I got 2 questions here...
    1. why do i have missing data package and it still showes me a green idicator?
    2. how can i solve this and is this something i should be worried about?
    Thank you very very much!

    Hii SCHT,
    you encounter these type of errors rarely...
    but in RSMO screen, check for any TRFCs struck..
    also go to the JOB in Source System and analyze the JOBLOG,
    there you can find some information about what tht particular job did..!!!
    and after that check for the same in the BW system...
    perhaps while transferring?extracting the recordsthrough data packages, it might have missed ..
    Force the request RED and repeat the IP again...
    you dont need to worry about anything...simply force the request red and reload.. just let us know if the problem still persists after repeating the load...
    Regards
    Prince

  • When Printing Form16, Error "Device types are unsuitable for ADS Documents"

    When Priniting Form16 it displays a message in the taskbar "Device types are unsuitable for ADS Documents"
    Regards,
    Ranga

    You need a special device/printer for ADS. Try doing some research on that error.

  • Red error: No SID found for value 'BTL ' of characteristic 0BASE_UOM

    Loading 0FI_GL_4 data from R3, get some red erros, the 1st error is:
    No SID found for value 'BTL ' of characteristic 0BASE_UOM
    Check the above red error details:     
    Diagnosis
         Characteristic value BTL does not exist in the master data table of
         characteristic 0BASE_UOM . Therefore, this value could not be
         transformed into the internal SID.
    System response
    Procedure
         Check whether the value is correct or not. If it is correct, you need to
         generate the associated master data. Note: For characteristics
         0FISCVARNT , 0FISCPER and 0FISCYEAR, there must be a corresponding
         fiscal year variant (see table T009). In addition, there must be units
         in table The value for 0FISCPER must be valid according to the fiscal
         year variants. This means that only the periods 0 to (no. of normal
         periods + special periods) are allowed. If the fiscal year variant is
         year-dependent, then only the periods defined for the corresponding year
         are valid. You can make these settings in Customizing in the activity
         Maintain Fiscal Year Variant . T006 and currencies in table TCURC. Also
         note that the units must be of
         Units that refer to  0UNIT  must be available in table T006, and
         currencies that refer to  0CURRENCY  in table TCURC. Note that the units
         must be available in internal format. Owing to the presence of a
         conversion exit in field MSEHI of table T006, you are only able to see
         the internal format if you deactivate this exit. ( Settings > User
         Parameters > Tab  DataBrowser > Consider Conversion exit  must not be
         set). Also take a look at note no. 619987.
    Procedure for System Administration
    Any idea to resolve the loading problem?
    Thanks

    Kevin,
       what ever it may be the source system, if T006 Table contains BTL, that sloves your problem.
    try load data once again. please update the thread after loading.
    all the best.
    Regards,
    Nagesh Ganisetti.

  • Data inconsistency: Parallel depr. area is not posted  - while doing F-90

    Dear All,
    While doing F-90 with transaction type 100  i am getting below error kidly suggest me if any thing is missing.
    Error- Data inconsistency: Parallel depr. area is not posted
              Message no. AAPO104
    Diagnosis
    For chart of depreciation 1000, you defined this area (or these areas) as parallel depreciation areas for depreciation area 01. In the current transaction, however, not all of these areas are posted. This is not allowed.
    Procedure
    Check if the transaction type is limited to certain depreciation areas. If there is such a limitation, add the missing depreciation areas for the transaction type.
    Check if the asset that is being posted manages all these depreciation areas.
    Regards,
    Sahil

    Dear expert
        please read OSS note :Check note 67688
       210557 Mass retiremt w/ revenue in case of parallel crcies
      124231 AAPO104 w/o reason in intercompany asset transfer
       97388 Asset transfer: Problems with parallel areas
    Regards
       Ajeesh.s

  • No SID found for value '0CURR' of characteristic 0CURRENCY

    Hello dear friends
    I am getting this above error message 'No SID found for value '0CURR' of characteristic 0CURRENCY' when i am trying to load data in my cube from an ODS.
    For the Keyfigure that is using the currency  i had to write the following routine in the Update Rule fo rthe Keyfigure:
    DATA: l_MZPLP1 LIKE /BIC/PMMAT_PLNT-/BIC/MZPLP1,
    l_MZPLP2 LIKE /BIC/PMMAT_PLNT-/BIC/MZPLP2.
    SELECT SINGLE /BIC/MZPLP1
    INTO l_MZPLP1
    FROM /BIC/PMMAT_PLNT
    WHERE
    /BIC/Mplant = COMM_STRUCTURE-/bic/Mplant
    AND
    /bic/mmat_plnt = COMM_STRUCTURE-/BIC/MMATERIAL.
    IF sy-subrc = 0.
    RESULT = l_MZPLP1.
    ENDIF.
    result value of the unit
      UNIT = '0CURRENCY' .
    Also i checked the 'UNIT CALCULATION IN THE ROUTINE' box.
    And under UNIT it does show 'Target Unit' - 'Currency Key'.
    Please advise what should i do to resolve this.

    hi Krrish,
    the error message normally indicates the value is not exist in table currency/unit
    Note 619987 - No SID for the 0UNIT or 0CURRENCY characteristic
    you can try transfer unit and currency from r/3, rsa1-> source system->right click 'transfer global setting', mark 'currency' and 'unit of measurement' (fiscal year and factory calendar also) and option 'update tables' and execute.
    you need to schedule this update, better daily before the transaction data load, to do this, from same screen go to menu program and schedule in background.
    hope this helps.
    Solution
    If you do not find the value in the T006 or TCURC table, you must insert it. Note that the initial value is always allowed.
    If you nevertheless receive this error message for the initial value, this means that there is an inconsistency in the SID table for the 0UNIT or 0CURRENCY characteristic. You can eliminate this inconsistency by calling the RSDMD_INITIAL_LINE_INSERT function module with I_CHABASNM = 0UNIT or 0CURRENCY.
    If units are loaded in the external format, you must either convert these into the internal format in the transfer or update rules or change the extractor/file.The CONVERSION_EXIT_CUNIT_INPUT function module converts the external value of a unit into the internal value.

  • No SID found for value 'BOX ' of characteristic 0UNIT

    Fellow masters,
    I get a <b>BRAIN 70</b> error - "<b>No SID found for value 'BOX ' of characteristic 0UNIT</b> "
    <b>Diagnosis</b>
    Characteristic value BOX does not exist in the master data table of characteristic 0UNIT. Therefore, this value could not be transformed int othe internal SID.
      So, I made reference to SAP Note 619987.
      <i>If you do not find the value in the T006 or TCURC table, you must insert it. Note that the initial value is always allowed.
    If you nevertheless receive this error message for the initial value, this means that there is an inconsistency in the SID table for the 0UNIT or 0CURRENCY characteristic. You can eliminate this inconsistency by calling the RSDMD_INITIAL_LINE_INSERT function module with I_CHABASNM = 0UNIT or 0CURRENCY.
    If units are loaded in the external format, you must either convert these into the internal format in the transfer or update rules or change the extractor/file.The CONVERSION_EXIT_CUNIT_INPUT function module converts the external value of a unit into the internal value.</i>
       Could someone please explain to me how which option should I proceed with ?
       I did an <b>SE16</b> with table T006 but don`t seem to find 0UNIT

    Hi,
    As Aneesh said, first Check the table T006 for the record for 'BOX' unit. If it is not there you have to do Replcation of Units from source system.
    It does not affect the data existing in datatargets. It simply update the table T006.
    Then after also check the table T006 for this record.
    With rgds,
    Anil Kumar Sharma .P

  • Data inconsistency; Partition /BIC/B0000158000 not deleted

    Hi Gurus,
    windows 2003, sql 2005.
    during Deletion of PSA Requests on normal daily chain load i recive en error :
    Data inconsistency; Partition /BIC/B0000158000 not deleted
    Delete request REQU_D91K36PDHZ3SPN9CTO7RHF4UI from PSA 0RF_PRODUCT_ATTR_BA: Error! - subrc:  2
    in report  RSAR_PSA_CLEANUP_DIRECTORY_MS
    here check option "Only active PSA" and "persistent staging area" and all the options in "check options".
    i see :
    Fatal error occured, DO NOT USE correct option
    Errors wrongly stored in partition refer to NOTE 992248 / 1051664
    For inconsistent RSTSODSPART entries no auto correction available
    PSA: 0ACCOUNT_ATTR_BA 000 invalid PARTNO setting: 9999
    PSA: 0ACCOUNT_TEXT_BA 000 invalid PARTNO setting: 9999
    PSA: 0ARTICLE_ATTR_BA 000 invalid PARTNO setting: 9999
    PSA: 0ARTICLE_TEXT_BA 000 invalid PARTNO setting: 9999
    PSA: 0BILL_CAT_TEXT_BA 000 invalid PARTNO setting: 9999
    PSA: 0BILL_RULE_TEXT_BA 000 invalid PARTNO setting: 9999
    PSA: 0BPARTNER_ATTR_AA 000 invalid PARTNO setting: 9999
    PSA: 0BPARTNER_ATTR_BA 000 invalid PARTNO setting: 9999
    PSA: 0BPARTNER_TEXT_AA 000 invalid PARTNO setting: 9999
    PSA: 0BPARTNER_TEXT_BA 000 invalid PARTNO setting: 9999
    PSA: 0BP_BANK_ATTR_AA 000 invalid PARTNO setting: 9999
    PSA: 0BP_BANK_ATTR_BA 000 invalid PARTNO setting: 9999
    PSA: 0BP_DEF_ADDRESS_ATTR_AA 000 invalid PARTNO setting: 9999
    there is over 14000 errors like invalid PARTNO setting: 9999
    whay sould i do ? how can i fix this ?
    Best regards
    Lukasz

    Hi Lukasz:
    Did you check if SAP Notes 992248 and 1051664 are applicable to your system?
    Regards,
    Francisco Milán.

  • Data inconsistency: posting with restricted transaction type (FAA_POST047)

    Hi colleagues!
    I have the following error:
    Data inconsistency: posting with restricted transaction type
    Message no. FAA_POST047
    Diagnosis
    You are trying to post in company code 1000 with transaction type 130 in ledger group 0N. According to table TABWA, this transaction type is limited. Nonetheless, according to your entries, you want to post to area 11.
    System Response
    Using limited transaction types is obsolete and would lead to an inconsistent posting in this situation. The system rejects the posting.
    Procedure
    Use a transaction type that is not limited. And, if possible, choose the ledger group and/or depreciation area on the initial screen.
    According to specific accounting we shouldn't post to one of the depr. area, so most of the tr.types are restricted to post to all areas except this one.
    Because of this, posting from MM with acc.assignment 'A' is impossible - I have this error.
    Any ideas how to solve?
    Thanks in advance

    Hi Anton
    This looks like your transaction type -130 is limited to post only in ledger group-0N as per the transaction type configuration. Due to which system is unable to post all the ledgers and hence this lead to inconsistency.
    Please verify the transaction type 130- in configuration T code - OAYA and see if it is restricted by depreciation area (eventually allow to post only ledger group- 0N.
    Tcode - OAYA (Limit Transaction Types to Depreciation Areas)
    please verify and let us know the update. hope this helps
    Best Regards
    Jomon

  • 0UNIT - No SID value found for value 'FYR' of characteristic 0UNIT

    Dear All,
    Request your help for the following issue observed.
    Please find below the details of the issue observed:
    Scenario: A flat file upload in and ODS with field Alternate Unit of Measure (mapped to 0UNIT)
    Issue: While activating the data in the ODS (Transformation, RSDS transaction datasource), it gives an error stating 'No SID found for value 'FOZ' of characteristic 0UNIT'.
    Measures tried: Transferring Global Settings, Checking in the table 'T006', Checking the format of the flat file.
    May I please request your help for the above issue at the earliest.
    Thank you.
    Regards,
    Kunal Gandhi

    Hello,
    Same issue here.
    I've checked the entries in 0UNIT SID table: The unit "xxx" is not present.
    But this unit is present in T006 table, with no specific option.
    The update mode for Master Data on SPRO is : "Create master data if Not avalaible (Auto_sid)"
    The update mode in infopackage is "Always update data, even if no master data exist for the data"
    I've used the "Rebuild tables" mode for Units of measurement for my source system.
    The tried the simulate update for my datapackage.
    ==> No errors
    ==>deletion of package on the data target
    ==>manuel update of data from the package
    ==>change to green
    ==>check the 0UNIT SID table : The unit "xxx" is now present !
    Hope this helps

  • No SID found for value 'PC ' of characteristic 0UNIT

    HI,
    I am extracting Profit analysis data from R/3 to BW3.5.
    In this i am getting one error.
    No SID found for value 'PC ' of characteristic 0UNIT
    How can i resolve this.
    I already did the following step.
    rsa1->source system->r/3 source system, right click 'transfer global settings',
    in next screen, make sure 'unit...' checkbox is marked.
    and execute.
    But the status is same(error)
    Please help me..
    Thanks

    No SID found for value 'PC ' of characteristic 0UNIT
    Hi,
      I am not getting the right answer for this .The issue is very Urgent
    I am extracting PP data from R/3 to BW3.5.
    In this i am getting one error.
    No SID found for value 'PC ' of characteristic 0BASE_UOM
    How can i resolve this.
    I already did the following step.
    rsa1->source system->r/3 source system, right click 'transfer global settings',
    in next screen, make sure 'unit...' checkbox is marked.
    and execute.
    But the status is same(error)
    Please help me..
    Thanks,
    Chinna

  • No SID found for value

    I have loaded a DSO successfully, they when I am activating it, I receive the error message "No SID found for value 4125463633 ZGL_SIRID.  However, when I look at the SID table (/BIC/SZGL_SIRID) and search for the value indicated, I see that value in the SID table.  Then when I look up values before and after that number, I see those values and they look just like the one that is giving me an error.
    In the Monitor, under the Detail tab, in DataStore Activation (change log):Errors occurred
    No SID found for value '000000004125463633 ' of characteristic ZGL_SIRID
    Process 000065 returned with errors
    Activation of M records from DataStore object ZPC_O09 terminated
    Thanks,  Keith J

    Hi,
    Try to activate the packages in parallel.
    Go to the option "activate" in manage and then inside you have the option  "Activate in Parallel" at the right of process chain option.
    Go inside it select the option Dialog and give the option "Server Group for Parallel Dialog Processing"  as PARALLEL_GENERATORS.
    Let the number of process be 3.
    and now try to activate the request again.
    Once done then you should revert back the settings as the it was originally.
    If this is not working then try to activate the master data for ZGL_SIRID ..run an attribute change run and again try the activation of the DSO.
    Thanks
    Ajeet

  • Tp import fails with error "data files not transferred"

    Hi colleagues,
    I am working on transport requests. I had issued out the <i>tp addtobuffer SIDKxxxx <sid>  pf=TP_DOMAIN_SID.PFL </i> command for a number of transport requests at OS level; but when i then try to do <i>tp import SIDKxxxxx <sid> client= u18 pf=TP_DOMAIN_sid.PFL</i>, i get this error: "Data files are not transfered</b>" in the QAS system. Everything works fine in PROD though. What could be the reason for this. I can't get it done within the application either.
    Your responses appreciated.

    Hi,
    I guess you have individual transport directories. I f you have configured the Transport Domain and added the Other Two into the Domain and configured the Transport Route. You should be able to see the Some RFC Destinations in SM59.
    TMSADM@<SID>.<DOMAIN NAME>
    TMSSUP@<SID>.<DOMAIN NAME>
    Please check the Test connection. of all these RFC Destination. If these fail check if you have firewall issues between the system stopping the communication on Port 33<Instance No>.
    Thanks,
    Tanuj

Maybe you are looking for