Data Load Error: When loading Hierarchy through a flat file

Hi Bw experts,
I am getting the error message: Info object is not available: Message RSAR210, when trying to load the Hierarchy through flat file upload with IDOC processing.The info object is active. I am getting this error message only for one hierarchy, other hierarchies for the same inof object are loaded successfully.Can some one help me in this?
Thanks in Advance.
Regards,
Bala

Hi Bala,
Can you please share the solution asap..
As we are also facing the same issue.
Your quick response will be appreciated a lot
Regards,
Sai

Similar Messages

Numbering nodes when loading hierarchy from a flat file.

Hi All,
I want to load a hierarchy from a flat file. When we number the nodes, do they have to be in a sequence or can I give them any number I want? I want to make the GL account number as the node number since it makes it easy to generate the node number that way. The way I see it, the important thing is the parent node number; so this approach should be fine. Please correct me if I am wrong.
Thanks,
Uday

Hi Uday,
   You need to have a running sequence numbers for Node Id field in the flat file. The file structure is as
NODEID IOBJNM      NODENAME TLEVEL LINK PARENTID
00000001 0GLACC     GL233344             00000001
00000002 0GLACC     GL435556             00000001
00000003 0GLACC     GL545666             00000001
00000004 0costcenter cc433232            00000002
00000005 0costcenter cc433233            00000002
00000006 0costcenter CC555551            00000003
The Parentid will calculated by the system automatically.
when you prepare you file csv please ensure that you have 8 characters for the Node ID " 00000003" other wise you will get error.
And if you want to add GL Account number to your hierarchy then you need to add GL A/c Number as external characteristics in hierarchy and add it to your flat file .
Hope it helps.
Cheers,
Balaji

Object reference not set to an instance of an object error when generating a schema using flat file schema wizard.

I have a csv file that I need to generate a schema for. I am trying to generate a schema using flat file schema wizard but I keep getting "Object reference not set to an instance of an object." error when I am clicking on the Next button after
specifying properties of the child elements on the wizard. At the end I get schema file generated but it contains an empty root record with no child elements.
I thought may be this is because I didn't have my project checked out from the Visual SourceSafe db first but I tried again with the project checked out and got the same error.
I also tried creating a brand new project and generating a schema for it but got the same error.
I am not sure what is causing Null Reference exception to be thrown and there is nothing in the Windows event log that would tell me more about the problem.
I am using Visual Studio 2008 for my BizTalk development.
I would appreciate if some has any insides on this issue.

Hi,
To test your environment, create a new BizTalk project outside of source control.
Create a simple csv file on the file system.
Name,City,State
Bob,New York,NY
Use the Flat file schema Wizard to create the flat file schema from your simple csv instance.
Validate the schema.
Test the schema using your csv instance.
This will help you determine if everything is ok with you environment.
Thanks,
William

Load hierarchy through flat file

I am trying to load a hierarchy through a flat file and followed the SDN blog mentioned below.
Hierarchy Upload from Flat files
However, I get this runtime error while loading.
Runtime Error          ASSIGN_LENGTH_0
Information on where terminated
     The termination occurred in the ABAP program "SAPLRRSV" in
      "RRSV_INT_CHA_VAL_SPLIT".
     The main program was "RSABW_START_NEW ".
The termination occurred in line 42 of the source code of the (Include)
      program "LRRSVU10"
     of the source code of program "LRRSVU10" (when calling the editor 420).
                                                                                Source Code Extract
Line SourceCde
12 *"     VALUE(E_CHAVL_EXT) TYPE RSD_CHAVL_EXT
    13 *"     VALUE(E_T_DEP) TYPE RRSV_T_DEP
    14 *" EXCEPTIONS
    15 *"      UNKNOWN_CHANM
    16 *"      UNKNOWN_INFOCUBE
   17 *"----
   18
   19   DATA: l_s_cob_pro TYPE rsd_s_cob_pro.
   20   DATA: l_t_cob_pro_cmp TYPE rsd_t_cob_pro.
   21   DATA: l_subrc      LIKE sy-subrc.
   22   DATA: l_offset     TYPE i.
   23   DATA: l_s_dep      TYPE rrsv_s_dep.
   24
   25   FIELD-SYMBOLS: <chavl>.
   26
   27   IF i_very_internal = rs_c_true. "SB
   28     i_with_const = rs_c_true.     "SB
   29   ENDIF.                          "SB
   30
   31   PERFORM cob_pro_cmp_get USING i_infocube i_chanm
   32                        CHANGING l_t_cob_pro_cmp
   33                                 l_subrc.
   34   IF NOT l_subrc IS INITIAL.
   35     PERFORM raise USING rs_c_false l_subrc i_chanm space.
   36   ENDIF.
   37
   38   l_offset = 0.
   39
   40   LOOP AT l_t_cob_pro_cmp INTO l_s_cob_pro.
   41     IF i_with_const = rs_c_true OR l_s_cob_pro-chaconst IS INITIAL.
>>>>>       ASSIGN i_chavl_int+l_offset(l_s_cob_pro-intlen) TO <chavl>.
   43       IF l_s_cob_pro-iobjnm = i_chanm.
   44         IF     <chavl> IS INITIAL
   45             OR <chavl> EQ rsd_c_initial.
   46           IF i_very_internal = rs_c_true.

Hi,
This is Thilak. For loading Data To hierarchy from flat file u should follow the below steps.
1. Create info objects as per ur hierarchy structure. i.e., ZH_CNO( for cno), ZH_SRGN (for region) .
2. find the highest node level info object. i.e., ZH_CNO.
3. go to that info object (highest node level info object) and select "with hierarchy" chk box.
4. click on " MAINTAIN HIERARCHY" button and move the external characteristics info objects to rt. side pannel.i.e., ZH_SRGN.
(Hint : other than first and last node level characteristics)
5. Activate the info object.
6. Create the info source (ZH_IS) of " DIrect Update Type".
7. Assign Hierarchy Data source( ZH_CNO_HIER) to that info source.
8. Schedule the info package to load the hierachy data from flat file.
Note: If u have any doubts regarding flat file format and hierarchy structure plz call to +91 9600015640 or mail to thilak.oggn@gmail. bcz i am unable to draw that hier strtr ana table.
Edited by: thilak. neelam on Oct 24, 2008 1:44 PM
Edited by: thilak. neelam on Oct 24, 2008 1:52 PM

Syntax error while loading hierarchy from an external file

Dear Expert:
I am new to BW and I met a problem today while loading hierarchy from an external file. Actually I am following below article to load the hierarchy:
/people/prakash.bagali/blog/2006/02/07/hierarchy-upload-from-flat-files
When I schedule the infopackage, the error message says: "Syntax error in template RSTMPL9C, ROW 76". Actually there is only around 20 lines of records.
Since I am not familiar with hierarchy load, so:
1. while loading from external file, do I need to create one hierarchy in advance through "Maintain Hierarchies" in the infoobject? My understanding is since I can load that hierarchy from file, so I do not need to create one in advance, once the load completed, the hierarchy should automatically generated there. Is my understanding correct?
2. Before loading the hierarchy, do I need to load the master data of external characteristics in the hierarchy first? Here in my example, the sales hierarchy has 2 external characteritics (Country and region) in the hierarchy. Do I need to load some data first?
3. My 'Preview' function in the infopackage is gray so that I can not test the data loading. Why is it gray?
Information like file name, file dir, file type(csv), seperator should be correct there.
Can anybody help me take a look into that? Many thanks for your time in advance!
Tim

Hi ctsiszidane:
There are some other SAP Notes that can help you solve the problem. Depending on your Support Package level check which of them is applicable.
Note 659461 - RSAR 682: Syntax error in template RSTMPL9A, row 246
Note 605690 - Escape characters are not processed correctly
Note 620152 - Syntax error in RSTMPL9A during data loading from a file
Regards,
Francisco Milán.

Data Load Requirement through Process Chain

Hello All,
I have implemented an area through a custom data source and following is my data load requirement through Process Chain. Request you to kindly help me for the same.
1. The design is an InfoCube and updated using a Transformation through the custom data source.
2. For the entire year 2008 I want a single request to be loaded. So it gets loaded into the PSA and then into the Infocube through a (Delta) DTP.
3. Now, I have created an InfoPackage (Full Update) with year as 2009 in the selection. Tht is I want tht hencforth the data load should be for the year 2009.
4. Hence, the Infopackage will run to bring the 2009 data into PSA and I run the (Delta) DTP to update the same in the Cube.
5. Now, what i require is everyday the InfoPackage (Full Update) with 2009 should run and bring data into PSA. and the same should be updated in the InfoCube after deleting the 2009 request already present keeping 2008 request loaded previously intact.
I hope the above is nt confusing.
Please let me know if i can elaborate the same.
Thank you.
Regards,
Kunal Gandhi

Hi,
Please go through the links.
http://help.sap.com/saphelp_nw04/Helpdata/EN/21/15843b74f7be0fe10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/Helpdata/EN/f8/e5603801be792de10000009b38f842/frameset.htm
http://help.sap.com/saphelp_nw04/Helpdata/EN/b0/078f3b0e8d4762e10000000a11402f/frameset.htm
These may help you in designing the process chain as required.
Regards,
Sunil
Edited by: sunil kumar on Apr 17, 2009 6:20 PM

Error when transferring data; communication error when analyzing

Hi,
When I load the data from the SAP CRM source system. Iam getting the following error.
Error when transferring data; communication error when analyzing
Diagnosis
Data Packets or Info Packets are missing in BW, but there were - as far as can be seen - no processing errors in the source system. It is
therefore probable that an error arose in the data transfer.
With the analysis an attempt was made to read the ALE outbox of the source system, which lead to error .
It is possible that no connection exists to the source system.
Procedure
Check the TRFC overview in the source system.
Check the connection of the source system for errors and check the
authorizations and profiles of the remote user in both the BW and
source systems.
Check th ALE outbox of the source system for IDocs that have not been
Can anyone guide me on this.
Thanks in Advance
Varun

ok here's a development..when i logged in the source system to check the job...it says the job defn is incomplete. The description says:
Definition for job ARFC:SYSLOAD1C800CRMREMOTE is incomplete. Job cannot be released
Can anyone give an insight on it.
Any kind of input will be appreciated.
Regards
Varun

APEX bug:9879227 (ORA-01403: no data found error when using validations)

Hi,
We are getting the
ORA-01403: no data found error
when the APEX page has validations AND a tabular form is also present on the page.
I did see a couple of other forum links discussing the issue (bug id: 9879227 ?? ).
But what i want to get a confirmation on is, in which release was this bug really fixed ?
i see the release notes of 4.0.1.00.03 claiming that it is fixed
in the release.
we are on 4.0.1.00.03. is this bug really solved in release 4.0.1.00.03?
are there any known work-arounds ? i tried re-creating the report multiple times, but that did not help.
Any suggestions or work-arounds will greatly help us.
Regards,
Ramakrishnan

Ramakrishnan,
If you are talking about getting no data found when trying to save the report then take a look at the last message in this thread:
{message:id=9971445}
Cheers,
Tyson Jouglet

Error when executing DBMS_ERRLOG through Stored Procedures...

Hi,
We have TWO schemas like IDWH_ODS and IDWH_ERR running on Oracle 10g Rel.2.
The schema IDWH_ERR has direct SELECT privilege on all the base tables in IDWH_ODS schema. (As Pl/sql doesn't support ROLE, we have granted direct SELECT on each of the tables)
IDWH_ODS schema has tables like ACCOUNT & CUSTOMER, for which I need to create DML Error logging tables in IDWH_ERR schema.
I have one procedure 'Cr_Errlog_Tabs' in IDWH_ERR schema which gets all tables in IDWH_ODS and creates Error logging table in IDWH_ERR schema using DBMS_ERRLOG package. My problem starts here,
When I execute the DBMS_ERRLOG package in IDWH_ERR through SQL*Plus LIKE,
> exec DBMS_ERRLOG.CREATE_ERROR_LOG('idwh_ods.ACCOUNT','ERR$_ACCOUNT','idwh_err');
it's creating the error log table 'ERR$_ACCOUNT' in IDWH_ERR schema.
(...the same will be working when execute through Anonymous plsql block)
BUT, when i execute the DBMS_ERRLOG package with same parameters through the stored Procedure 'Cr_Errlog_Tabs', it throws the following error...
ORA-01031: insufficient privileges
Please let me know how the solution at the earliest.

WHY DO YOU FEEL YOU HAVE TO START A NEW THREAD FOR YOUR PROBLEM!?
Insufficient priv error when executing DBMS_ERRLOG through PLSQL

Error when charging hierarchy for infoObject hieracky for 0MATERIAL

Error when charging hierarchy for infoObject hieracky for 0MATERIAL from infosource 0MATERIAL_LKLS_HIER.
I have an issue when performing a charge of the material hierarchy for the 0MATERIAL InfoObject. The problem is that maybe there are some referential problem. I show you 2 images about that.
[http://bp1.blogger.com/_RnNmoD1OiLE/SE1AyQThUgI/AAAAAAAAAmU/PPp7Uwn22PI/s1600-h/ErrorCarga1.JPG]
[http://bp0.blogger.com/_RnNmoD1OiLE/SE1A6bGswnI/AAAAAAAAAmc/Gtvotn1nilI/s1600-h/ErrorCarga2.JPG]
Could please anyone give me a clue about what's my problem? All regs i'm trying to upload to my BW system give the same error. The datasource i'm using is 0MATERIAL_LKLS_HIER. As you can see, it has registers on it.
[http://bp2.blogger.com/_RnNmoD1OiLE/SE1BBvyBAOI/AAAAAAAAAmk/i2aXHvt8E7o/s1600-h/ErrorCarga3.JPG]
Any Idea? Thank-you!
Artur.
Edited by: Artur Rodriguez Coma on Jun 9, 2008 4:59 PM
Edited by: Artur Rodriguez Coma on Jun 9, 2008 5:00 PM

For this you can enter the screen of infoobject change and select the hierarchy tab at the bottom theres a button External Characteristic in Hierarchy ....there you can set other infoobjects that can be part of the hierarchy of your infoobject...
This is the procedure but you only can add infoobjects that attributes of the principal infoobject ....
I hope this helps
Regards

I get the following error when trying to open a pdf file... '*pdf.part could not be saved, because the source file could not be read"

I get the following error when trying to open a pdf file... '*pdf.part could not be saved, because the source file could not be read". I am able to open pdf files in IE and other programs.

I am encountering the same problem -- though with .qfx files from my bank. This worked fine in Firefox 31 ESR, but since upgrading to Firefox 33.0, I get the "<name>.qfx.part could not be saved, because the source file could not be read" when I attempt to download. (I should add that downloading PDF statements from the same site works fine, and that the qfx downloads work fine in IE and Chrome.)
I tried safe mode, it is still broken. Tried v34 beta, no luck. I reverted to version 31, it works again.
I guess I will stick with the older version until a solution is found...or just use an alternate browser to download my financial data.

Ssis issue - load recent added 5 flat files

HI
i have one query like i have 5 flat files in one folder today i loaded into sql server table,tomorrow again added 5 flat files in same folder.i want to load recent added 5 flat files,
can any one give me answer?

You need to have a loop and inside it have a step to check for file modified date for getting the recent files. Much better is if filename has timestamp part use that to determine the latest files
see example here
http://visakhm.blogspot.in/2012/05/package-to-implement-daily-processing.html
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

I/O Error when writing access Log buffer to file. error number: 28

Hi,
Oracle OracleAS Web Cache 10.1.2.3.0, Build 10.1.2.3.0 080201 is writing events like this:
[alert 13215] I/O Error when writing access Log buffer to file. error number: 28
I've looked for this alert and i've found this description:
WXE-13215 I/O Error when writing access Log buffer to file. error number: %d
Severity: alert
Cause: I/O error happened when OracleAS Web Cache tried to write to the access log file.
Action: Check the status of access log file. For example, see if the disk is full
Anybody knows what "error number: 28" stands for? The logs are sended to other server and it seems that the disk size is ok.
thanks!

I tested again...it seems LabVIEW doesn't like the way I wrote the measurement files. I attached a set of VIs (ZIP-file) to give you a clue how it was done. When I try to save and read a file containing just plain DBLs from a 1D-Array (see attached file generating VI) it works perfectly well for large file sizes.
So there might get something messed up by the way LabVIEW saved the measured data. You'll notice, that I (accidentally) left the "prepend array string size" input of "write to binary file" function unwired which means that the size information will be written as a type of header. Maybe this is the reason that it doesn't work as expected...
Attachments:
VibrationMeasurement.zip ‏76 KB
generate_test_bin_data.vi ‏12 KB

Error When Attempting to Create a Password File

hi all,
i recevied the following error when attempting to create a password file via the ORAPWD utility. can anyone offer any insight into what is causing this problem?
$ ./orapwd file=/appl/oracle/product/9.2.0-64bit/dbs/orapwLEAF password=XXXXXX
Unable to find error file.
Error code 5
thanks

Try to set env variable ORACLE_HOME
Best Regards
Krystian Zieja / mob

Extract hierarchy from a flat file

Hello,
Im trying to extract hierarchy from a flat file.
The hierarchy is built from 3 different infoObjects each infoObject represent different level in the hierarchy. I built the hierarchy in the last level of the hierarchy and put all the levels as external chars in the hierarchy.
(I used the blog: Hierarchy Upload from Flat files: /people/prakash.bagali/blog/2006/02/07/hierarchy-upload-from-flat-files )
When I extract the data into the PSA it looks fine but when I choose to update the PSA data into the infoObject the request stays yellow. Three is no dump and I cant find the job in SM50.
Please Advice,
David

Hi David,
Thats the problem with using PSA for flatfile hierarchy loads. If you can change the transfer method to "IDOC" then change and retry the load. The IDoc method gives you an advantrage when dealing with flatfiles as you can debug and notice which record # has errors.
Bye
Dinesh

Data Load Error: When loading Hierarchy through a flat file

Similar Messages

Maybe you are looking for