Data load failure - SPLIT PARTITION  FAILED

Hi ,
We are trying to load data into PSA from R/3. But its giving the error "SPLIT PARTITION  FAILED".
The basis has Confirmed that there are no space issues.
Has Anybody faced this error.
Regards,
Mayank

hi,
as a first thought, i suggest you look at the incoming data, is it that values coming in records cannot be stored in existing partitions something like out of range.
hope this helps
purvang

Similar Messages

  • Pager from Data Load Failure

    Everynight we are loading the data into BW Production system  using Process Chains.
    When there is data load failure, is there a way we get information on Pager for immediate action.
    Suggestions are welcome.

    Easiest way (at least the way I've always set it up)is if you have a text pager is have it e-mail the pager.  The BASIS team will need to set up the SMTP service in ICM and a job to schedule the e-mails to be sent.  You'll also need to set up the e-mail address in the user's SU01 info.  There are several notes on how to set this up.
    You can also set up a program that pages you but requires an exteral modem to dial up, etc.  SMTP service is already there and pretty easy to integrate into your company's e-mail.
    -bill
    Message was edited by: Bill Smallwood

  • Master data load failure. RSRV check resulted in inconsistencies.

    Hi...
    In our production system, master data load to 0EMPLOYEE is failing every alternate day. When I check the same in RSRV, following checks are red:
    1. Time intervals in Q table for a characteristic with time-dep. master data
    2. Compare sizes of P or Q and X or Y tables for characteristic 0EMPLOYEE
    3. SID values in X and Y table: Characteristic '0EMPLOYEE'
    If I repair it, it becomes green and the load is fine. Next day the load fails again. When I check in RSRV, I get the same 3 errors. So, again I need to repair it. Let me know the permanent solution for this.
    I ran the programs: RSDG_IOBJ_REORG and RSDMD_CHECKPRG_ALL but these fixes are also temporary. Moving a new version of the object from Dev to QA and then to Production is not preferable right now as this involves a high amount of visibility.
    I know the SID tables and all are corrupted from the logs I see. But is there any permanent solution for this without transports?
    Thanks,
    Srinivas

    Hi
    Chk this link will help you: Master data deletion
    Regards
    Ashwin.

  • Data load failure with datasource Infoset Query

    Dear Experts,
    I had a data load failure today,where i am getting data from the datasource which was built on Infoset Query.
    we had a source system upgrade and when i checked Infoset query in the development of Source sytem  im getting the below message :
    "Differences in field EKES-XBLNR
         Output Length in Dictionary : 035
         Output Length in Infoset : 020
    Message was saying Adjust the INFOSET,I dont have authorisation to create the transport in the source system.I requested the respective person to Adjust the Infoset and also to regenerate the same and move to production system.
    I think this will solve my problem,Please correct me if am wrong.
    Regards,
    Sunil Kumar.B

    Hi Suman,
    i am still facing the problem even after adjusting the Infoset.The problem is we are facing the short dump with length mismatch.
    when i checked the Infoset we are taking the field xblnr from table EKES and data element for teh field was XBLNR_LONG(char-35) but when i checked the datasource in RSA2 the dataelement for XBLNR was showing as BBXBL(char20).
    i think this was causing the problem and i checked in SQ02 we will take the field directly from the table and how there is chance to change the dataelement.
    Please help me to correct the same.
    Regards,
    Sunil Kumar.B

  • Master Data Load Failure- duplicate records

    Hi Gurus,
    I am a new member in SDN.
    Now,  work in BW 3.5 . I got a data load failure today. The error message saying that there is 5 duplicate records . The processing is in to PSA and then to infoobject. I checked the PSA and data available in PSA. How can I avoid these duplicate records.
    Please help me, I want to fix this issue immediately.
    regards
    Milu

    Hi Milu,
    If it is a direct update, you willn't have any request for that.
    The Data directly goes to Masterdata tables so don't have Manage Tab for that infoobject to see the request.
    Where as in the case of flexible update you will have update rules from your infosource to the infoobject so you can delete the request in this case.
    Check this link for flexible update of master data
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/37dda990-0201-0010-198f-9fdfefc02412

  • Data load failures in Essbase Clusters ( MSCS)

    Hi,
    If there is a failure on the Active Essbase Cluster Node (call this Node A) and the Cube has to be rebuilt on Cluster Node B, how will the Cube be re-built on Cluster Node B.
    what will orchestrate the required activities in the correct order to rebuild the Cube)? Both Essbase nodes are mounted on to Microsoft Clustered Services.
    In essential, I want to know
          A)  How to handle the metadata load that failed on Node1 onto Essbase Node2?
          B)  Does the session continues to perform the meta data/ data load on the Essbase Second Node when the Essbase First Node fails?
    Thanks for your help in advance.
    Regards,
    UB.

    It would be built the same way as you either use the Essbase clustername or the MSCS VIP used for the Essbase cluster configuration,  you would not ever be referencing a host name so it does not matter which node it is running on.
    The session will be lost on a failover as it is the same as an essbase restart.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Data load from semantic partition info-provider

    Hi,
    We are trying to load transaction data from a multiprovider which  is built on "Semantic Partitions" objects.  Now when i try to do it on semantic partitions objects then it is throwing error.  However, the same  works when i do it on individual cubes.
    Here is the log
    [Start validating transformation file]
    Validating transformation file format
    Validating options...
    Validation of options was successful.
    Validating mappings...
    Validation of mappings was successful.
    Validating conversions...
    Validation of the conversion was successful
    Creating the transformation xml file. Please wait...
    Transformation xml file has been saved successfully.
    Begin validate transformation file with data file...
    [Start test transformation file]
    Validate has successfully completed
    ValidateRecords = YES
    Error occurs when loading transaction data from other model
    Validation with data file failed
    I was wondering if anybody has implemented data load package with semantic partition infoprovider. 
    We are on
    BI- 730, SP 7,
    BPC 10.0, SP 13
    Thanks
    prat

    Hello,
    BPC provides its own process chains for loading both transaction and master data from BW InfoProviders.  As far as I know that is the only way to load data from other sources into BPC.
    Best Regards,
    Leila Lappin

  • Master data Load Failure

    Hi All,
    Could any body clearly explain the following options in the Info Package of master data Info Object with full update
    Update data
    1. PSA and then into Info Obejcts
    2  . Only PSA   ( Update Subsequently in data targets )
          Data source trasfers no duplicate records
         Igonore double data records
    While I am doing master data load with the 1 and 3 options I am getting same no of records updated in PSA but loadng is getting failured with the 1st option (Caller 01 02 .. 20 Messages ) .and request with 3rd option is success..
    Thanks in Advance...
    Regards,
    Nagamani

    Hi
    U r master data might have the Dublicate records
    select the PSA
    and select the option
    Ignore dublicate data records
    IF  you have the Deblicates
    EX
    CNO
    1010
    1020
    1010
    ITs not alowed the 1010 record
    Regards

  • Error in the hierarchy structure - Data Load Failure

    Hi
    We are having a regular Master data hierarchy Full load: 0WBS_ELMT. This data load is from the SAP R/3 source system. It was failed today with following message:
    Error in the hierarchy structure     
    Node ID 00016749 does not exist.
    Node ID 00005867 starts an endless loop
    Node ID 00001367 has not been included in the hierarchy
    Can any one help me out to solve this issue?
    Best Regards,
    Venkata.

    hi,
    refer to this thread.
    No hierarchy displaying in the Maintain Hierarchies

  • Initialisation data load failure

    Hi all,
    My initialisation data load for 0EC_PCA_3 failed with an error message "Selected No does not agree with transferred no." , the data processing is ok.
    I am pasting the shrot dump from the source system below.
    Error analysis                                                                               
    An error occurred when executing a REMOTE FUNCTION CALL.                    
    It was logged under the name " "                                            
    on the called page.                                                                               
    Last error logged in SAP kernel                                                                               
    Component............ "SAP-Gateway"                                         
    Place................ "SAP-Gateway on host hccr3prda1 / sapgw00"            
    Version.............. 2                                                     
    Error code........... 242                                                   
    Error text........... "timeout during allocate"                             
    Description.......... "no connect of TP opti1 from host hccr3prda1 after 22 
    sec"                                                                       
    System call.......... " "                                                   
    Module............... "gwr3cpic.c"                                          
    Line................. 5709                                                  
    Thanks

    Hi Roberto I have requested the data again twice , but this time the error message is different please could you help me with this.
    When attempting to access the data of table "ARFCSSTATE ", an internal error at
    the database interface occurred.                                               
    but when I check the D/B , it is accessible.
    may be I have to debug the flow , can u brief me how to debug the flow from R/3.
    Thanks

  • EDT Cat. 15 Data loaded to SAP but failed when updating

    Hi,
    I have an structure to load data into BP using KCLJ with Cat 15.
    Here it is.
    AKTYP
    TYPE
    PARTNER
    ROLE1
    KUNNR
    KUNNR_EXT
    BU_GROUP
    FIBUKRS
    CHIND_ADDR
    NAME_CO
    NAME_ORG1
    NAME_ORG2
    STREET
    STR_SUPPL1
    STR_SUPPL2
    STR_SUPPL3
    LOCATION
    HOUSE_NUM1
    POST_CODE1
    CITY1
    COUNTRY
    REGION
    LANGU
    CHIND_TEL
    TEL_NUMBER
    TEL_EXTENS
    We had the data loaded to SAP with ROLE 000000 and TR0100 but somehow when we tried to update the address thru ROLE TR0100, we had a dump and failed to update. However, the update is good when we use ROLE 000000 to update.
    Anyone would have a clue of this?
    Thanks

    I am new to EDT also. I know Cat 15 which can load BP. SAP has more categories which can load more using KCLJ. Here's my experience.
    Under Tcode SIMGH, find IMG structure External Data Transfer for SAP Banking. Under that structure, you can find Display Required and Optional Entry Fields for SEM Banking. When you enter 15 in the Category box, you'll see a whole list of fields about BP. You can use these fields to create your own structure.
    After you created your structure, use Define Sender Structure under External Data Transfer for SAP Banking to define your structure. After that, it is done. You can try use KCLJ to load your BP.
    If you still have other issues, mostly will be the configuration.
    Enjoy.

  • Data load failure with '#'

    Hi Experts,
    One of our data load is failing with special characteristic '#'.
    The exact error records is as follows: 390-166333#New, SUB, Fan 80x80x80mm, 12
    We have maintained '#' in RSKC, but still the load is failing.Any reason ?
    After editing '#' in PSA and reload fixed the issue.
    Can anyone suggest what should be done to fix this.
    Thanks & Regards,
    Naveen.

    Hi,
    try below field level routine.
    DATA: l_d_length like sy-index.
    DATA: l_d_offset LIKE sy-index.
    DATA: CharAllowedUpper(60) TYPE C.
    DATA: CharAllowedLower(60) TYPE C.
    DATA: CharAllowedNumbr(60) TYPE C.
    DATA: CharAllowedSondr(60) TYPE C.
    DATA: CharAllowedAll(240) TYPE C.
    CharAllowedUpper = 'ABCDEFGHIJKLMNOPQRSTUVWXYZÄÜÖ'.
    CharAllowedLower = 'abcdefghijklmnopqrstuvwxyzäüöß'.
    CharAllowedNumbr = '0123456789'.
    CharAllowedSondr = '!"§$%&/()=?{[]}\u00B4`*+~;:_,.-><|@'''.
    CONCATENATE CharAllowedUpper CharAllowedLower CharAllowedNumbr
    CharAllowedSondr INTO CharAllowedAll.
    RESULT = SOURCE_FIELDS-ENTITYNAME.
    l_d_length = strlen( RESULT )
    IF NOT RESULT CO CharAllowedAll.
    DO l_d_length TIMES.
    l_d_offset = sy-index - 1.
    IF NOT RESULT+l_d_offset(1) CO CharAllowedAll.
    RESULT+l_d_offset(1) = ''.
    CONDENSE RESULT NO-GAPS.
    ENDIF.
    ENDDO.
    endif.
    CONDENSE RESULT NO-GAPS.
    TRANSLATE RESULT TO UPPER CASE.
    Thanks,
    Phani.

  • Data Load process for 0FI_AR_4  failed

    Hi!
    I am aobut to implement SAP Best practices scenario "Accounts Receivable Analysis".
    When I schedule data load process in Dialog immediately for Transaction Data 0FI_AR_4 and check them in Monitor the the status is yellow:
    On the top I can see the following information:
    12:33:35  (194 from 0 records)
    Request still running
    Diagnosis
    No errors found. The current process has probably not finished yet.
    System Response
    The ALE inbox of BI is identical to the ALE outbox of the source system
    or
    the maximum wait time for this request has not yet been exceeded
    or
    the background job has not yet finished in the source system.
    Current status
    No Idocs arrived from the source system.
    Question:
    which acitons can  I do to run the loading process succesfully?

    Hi,
    The job is still in progress it seems.
    You could monitor the job that was created in R/3 (by copying the technical name in the monitor, appending "BI" to is as prefix, and searching for this in SM37 in R/3).
    Keep on eye on ST22 as well if this job is taking too long, as you may have gotten a short dump for it already, and this may not have been reported to the monitor yet.
    Regards,
    De Villiers

  • BW Data Load failure

    Hi,
       I created a BW Data Source in R/3 and checked in RSA3 (R/3) it is extracting the required record...
    But when i started data load in BW using that extractor i am geting error message
    <b>Request IDoc : Application document not posted</b>
    How can i proceed.
    Thanks

    Hi,
    Refer the link:
    https://forums.sdn.sap.com/click.jspa?searchID=937834&messageID=2379005
    With rgds,
    Anil Kumar Sharma .P

  • Data load - Failure Scenarios

    Can anyone please explain in detail on how to handle this DATALOAD issues. I would like to understand for following scenario in BI 7.0 and R/3 4.6c
    1) R/3 --> PSA --> DSO --> CUBE
    So, there are one infoPackage and 2 DTP's are involved.
    Let us take take a scenario, Please explain me in detail (Steps), on how to fix the LOAD, if the LOAD failed in R/3 --> PSA or PSA --> DSO or DSO --> CUBE.
    I would appreciate your help in advance and points will rewards, of course.
    BI Developer

    Hi.......
    1) Generally load fails in R/3 --> PSA due to RFC connection issue......You can check the RFC connection SM59.....
    If it fails........you can make the status red.....and delete the failed request from PSA........again load it........
    2) Load from PSA to DSO may fail due to many reasons....
    a) Lock issue...>> in this case you can check the lock in SM12........wait for the lock get released...........then make the QM status red......delete the request from the target..again repeat the load............
    Or may be due to locked by change run........in this case also after the completion of ACR....you have to repeat the load..
    b) load failed because last delta failed.........In this case first you have to rectify the last delta.........then repeat this load....
    3) DSO --> CUBE.........a)here also the load may fail due to lock issue...in this case also you have to delete the request from the target.after making the QM status red........then lock get released you have to repeat the load.......
    b)while loading data from DSO to infocube , the dtp run failed due to short dump.The error anlysis gives description as DBIF_RSQL_SQL_ERROR,
    This error is usually seen when the table behind ODS is getting updated from more than one source system simultaneously. Here the data packets from more than one request contain one or more common records. This gives rise to deadlock while updating inserting records into the ODS table and subsequently a short dump is encountered leading to the failure of one request. The solution is to cancel the loads and run them serially. A possible long term solution is to load the data up to the PSA in parallel and then load the ODS table from the PSA in serial. (Here change the InfoPackage to option ‘PSA only’ and tick ‘Update subsequent data targets’).
    Solution
    It may be possible that the job is set up in such a way that the activation of data in the ODS takes place only after data is received from all four regions. Thus, if the failing request is deleted the correct requests will also be deleted. Hence it is required to change the status of the failed job from red/yellow to green, activate the ODS data and then re-start the load from the (failing) source after correction of any possible errors.
    c) while loading the active data that is in the first ODS into a cube - it fails with the following error.
    err #1 )Data Package 1 : arrived in BW ; Processing : Error records written to application log
    err #2 ) Fiscal year variant C1 not expected
    Sol :   'GO to SPRO, SAP Customizing guide
    Open the tree:
    SAP Netweaver
    SAP Business Information Warehouse
    Maintain FIscal Year Variant
    Hope this helps you.....
    Regards,
    Debjani........
    Edited by: Debjani  Mukherjee on Sep 24, 2008 8:47 PM
    Edited by: Debjani  Mukherjee on Sep 24, 2008 8:53 PM
    Edited by: Debjani  Mukherjee on Sep 24, 2008 8:54 PM

Maybe you are looking for