Data load from DSO to cube fails

Hi Gurus,
The data loads have failed last night and when I try to dig inside the process chains I find out that the cube which should be loaded from DSO is not getting loaded.
The DSO has been loaded without errors from ECC.
Error Message say u201DThe unit/currency u2018source currency 0currencyu2019 with the value u2018spaceu2019 is assigned to the keyfigure u2018source keyfigure.ZARAMTu2019 u201D
I looked in the PSA has about 50, 000 records .
and all data packages have green light and all amounts have 0currency assigned
I went in to the DTP and looked at the error stack it has nothing in it then I changed the error handling option from u2018 no update,no reportingu2019 to u2018valid records update, no reporting (resquest red)u2019 and executed then the error stactk showed 101 records
The ZARAMT filed has 0currency blank for all these records
I tried to assign USD to them and the changes were saved and I tried to execute again but then the message says that the request ID should be repaired or deleted before the execution. I tried to repair it says can not be repaired so I deleted it and executed . it fails and the error stack still show 101 records.when I look at the records the changes made do not exist anymore.
If I delete the request ID before changing and try to save the changes then they donu2019t get saved.
What should I do to resolve the issue.
thanks
Prasad

Hi Prasad....
Error Stack is request specific.....Once you delete the request from the target the data in error stach will also get deleted....
Actually....in this case what you are suppose to do is :
1) Change the error handling option to u2018valid records update, no reporting (resquest red)u2019 (As you have already done....) and execute the DTP......all the erroneous records will get sccumulated in the error stack...
2) Then correct the erroneos records in the Error Stack..
3) Then in the DTP----in the "Update tab"....you will get the option "Error DTP".......if it is already not created you will get the option as "Create Error DT".............click there and execute the Error DTP..........The Error DTP will fetch the records from the Error Stack and will create a new request in the target....
4) Then manually change the status of the original request to Green....
But did you check why the value of this field is blank....if these records again come as apart of delta or full then your load will again fail.....chcek in the source system and fix it...for permanent solution..
Regards,
Debjani......

Similar Messages

Data load from DSO to Cube in BI7?

Hi All,
We just migrated a dataflow from 3.5 to 7 in development and moved to production. So till now in production, the dataloads happend using the infopackages.
a. Infopackage1 from datasource to ODS and
b. Infopackage2 from ODS to the CUBE.
Now after we transported the migrated dataflow to production, to load the same infoproviders I use
1. Infopackage to load PSA.
2. DTP1 to load from PSA to DSO.
3. DTP2 to load from DSO to CUBE.
step1 and step2 works fine but when I run the DTP2 it is getting terminated. But now when I tried the step b (above), it loads the CUBE fine using the infopackage. So I am unable to understand why the DTP failed and why the infopackage load is successful. In order to use the DTP do we need to do any cleanup when using it for first time? Please let me know if you have any suggestions.
Please note that the DSO already has data loaded using infopackage. (Is this causing the problem?)
Thanks,
Sirish.

Hi Naveen,
Thanks for the Reply. The creation of DTP is not possible without a transformation.
The transformation has been moved to production successfully.

Data loading from DSO to Cube

Hi,
I have a question,
In book TBW10 i read about the data load from DSO to InfoCube
" We feed the change log data to the InfoCube, 10, -10, and 30 add to the correct 30 value"
My question is cube already have 10 value, if we are sending 10, -10 and 30 Values(delta), the total should be 40 instead of 30.
Please some one explaine me.
Thanks

No, it will not be 40.
It ll be 30 only.
Since cube already has 10, so before image ll nullify it by sending -10 and then the correct value in after immage ll be added as 30.
so it ll be like this 10-10+30 = 30.
Thank-You.
Regards,
Vinod

Partial data loading from dso to cube

Dear All,
I am loading the data from dso to the cube through DTP. The problem is that some records are getting added through data
packet 1 to the cube around 50 crore records while through data packet2 records are not getting added.
It is full load from dso to cube.
I have tried deleting the request and executing DTP but again the same no of records get added to the cube through datapacket 1 and after that records are not added to the cube through datapacket 1 ;request remains in yellow state only.
Please suggest .

Nidhuk,
Data load transfers package by package. Your story sounds like it got stuck in second package or something. Suggest you check package size, try to increase to a higher number to see if anything changes ? 50 records per package kind of low, your load should not spread out into too many packages.
Regards. Jen
Edited by: Jen Yakimoto on Oct 8, 2010 1:45 AM

Data load from DSO to cube

Hi gurus
We have a typical problem, we have to combined 2 records into one when they reach to DSO.
One source is flat file and the other is R3. so few fields I am geting from flat file and few from R3 . They are creating one record when they loaded to DSO . Now I am getting one record in active data table but when I load the data to cube from that DSO ( Data is going from change log to cube ) to cube , I am getting 2 seperate records ( one which is loaded from flat file and one which is loaded from R3 ) in cube which I dont want. I want only one record in cube just like i have in my active data table in DSO.
I cant get the data from Active data table because I need delta load.
Would you please advise what can I do to get that one record in Cube?
Pl help

Ravi
I am sending the data thro DTP only but is there any solution to get one record bcos in other scenario I am getting data from 2 different ERP sources and getting one record in DSO and cube as well.
but that is not happening for this second scenario where i am getting data from FLAT file and ERP and traing to create one record.

Filter in DTP load from DSO to cube by Forecast version not working ?

Hi All
Can any help on the below code I did to filter data update from DSO to Cube in DTP - to filter by next period forecast version. This code is not working it is loading data pf present forecast version also Can any one help please
data: l_idx like sy-tabix.
data: L_date type sy-datum,
      t_gjahr type t009b-bdatj,
      t_buper type t009b-poper,
      1_period(6) type c.
          read table l_t_range with key
               fieldname = 'ZFCSTVERS'.
          l_idx = sy-tabix.
   clear: t_buper, t_gjahr.
    L_date = sy-datum.
    call function 'DATE_TO_PERIOD_CONVERT'
      EXPORTING
        i_date = L_date
        i_periv = 'Z1'
      IMPORTING
        e_buper = t_buper
        e_gjahr = t_gjahr.
*---> Check if the period is 012, then increase the year by 1 and set
*period to 001.
    if t_buper = '012'.
      t_gjahr = t_gjahr + 1.
      t_buper = '001'.
    else.
*---> Increase just the period by 1.
      t_buper = t_buper + 1.
    endif.
    concatenate t_gjahr t_buper+1(2) into 1_period.
    l_t_range-fieldname = 'ZFCSTVERS'.
    l_t_range-low = 1_period.
    l_t_range-sign = 'I'.
    l_t_range-option = 'EQ'.
       append l_t_range.
          p_subrc = 0.
sk
Edited by: SK Varma Penmatsa on Jan 23, 2012 2:30 PM

Hi Praveen/Raj,
Basically PCS_PER_PACK is a KF i have in the DSO, which i use to calculate the total number of pieces which i store in a KF in the cube. The transformation rule to calculate TOTAL_PCS is a routine.
within this routine i multiply PACKS * PCS_PER_PACK to calculate the figure. I do not store PCS_PER_PACK in the cube.
is it this rule that you want me to check whether aggregation is set to SUM or overwrite? Also this rule should add up the total pcs. if I say overwrite then it might not give me the desired result?
Thing which i cannot figure out is since the transformation rules go record by record why would it add up the PCS_PER_PACK figure before calculating?
I cannot access the system at the moment. as soon as i can i will check on it and get back to you.
thanks once again for you're quick response to my need.
regards
dilanke

Data problem from DSO to cube

hi
i am facing data from problem from dso to cube
i am getting daat into dso
plant   material doc_num itemno qty
p1      m1           1              1         10
p1      m1           1               2         20
dso i am uisng key fields
doc_no
item_no
doc_year
data fields
material
plant
qty
while loading data into cube
its showing only
p1 m1 1 2 20
item 1 is missing
there is no iten num filed in my target field?
ple let me know ur idea.

Hi,
The problem is in your ODS/DSO.
In your ODS you have 'Doc_num' as key field.
For both Items 1 & 2, you have same key field ( Doc_Num) Value.
So, the first record will be over written by the second one. So from your ODS you will get only the latest record to the Cube.
If you want to send both doc_nums to cube, you need to bring doc_num to the data fields area of ODS.
Hope this helps.
Cheers
Praveen

Delta load from ODS to cube failed - Data mismatch

Hi all
We have a scenario where the data flow is like
R/3 table - >dataSrc -- > pSA - >InfoSrc -> ODS ->Cube.
The cube has an additional field called "monthly version"
and since it is a history cube , it is supposed to hold data
snapshots of the all data in current cube for each month .
We are facing the problem that the Data for the current month
is there in the history ODS but not in the cube . In the ODS ->Manage->requests
tab i can see only 1 red request that too with 0 recs.
However ,In the cube -> manage-> reconstruction tab , i can see 2 Red request
with the current month date. Could these red requests be the reason for
data mismatch in ODS and cube .
Please guide as to how can i solve this problem .
thanks all
annie

Hi
Thanks for the reply.
Load to Cube is Delta and goes daily .
Load to ODS is a full on daily basis .
Can you help me how to sort this issue . I have to work directly in production env . so has to be safe and full proof .
Thanks
annie

Data loading from ODS to CUBE

Hi All,
I have loaded data from ODS to CUBE. now i have requirement to add some fields in the standard cube. so, for testing purpose i have created copy of the original and created transformation . now when i try to load data from ODS it shows me no more data available . while data is already there in ODS.
now what should i do ? i don't want to delete data from original cube. is there any other way to load data through transformation ?
Regards,
Komik Shah

Hi,
Check the DTP of old cube n see whether its Delta. If yes then check whether any one of the foll is check:
1) get delta only once
2) get data by request.
If 1 is checked then delta wont come for the second cube as it says to get delta once and delta is already in one of the cube.
Generally both should be unchecked but can vary as per requirements.
Now for your new DTP, i dont think it will aloow you to change to FULL.
If its allowing you to select FULL, then select it and select from acive table.
try to load and see.
regds,
Shashank

No data loaded from ODS to Cube

Hi,
I am trying to do init with data transfer from 0FIAP_O03 to 0FIAP_C03...
though there is data in the ODS, nothing is loaded to the cube. It just says
No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System Response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system.
Any suggestions?
Thanks
Shalini

Hi
"Info IDoc received with status 8" implies that there is no data in the source.
But as you say, that data is there in the source(ODS), then there is some inconsistency in the data source and you need to replicate the data source and reactivate that.
IDoc Status 8 signifies that there is no data in the source and its not any error.
For more info on idocs check the below link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0087780d-81b0-2a10-eb82-86e1062f1a2d
Also goto sm58 and clear the idoc there.
Hope this helps
Regards
Shilpa

Data loads from ODS TO CUBE

Hi,
   i have delta loads comming into the ODS. i do full update from ODS to the cube by date range for material moments no. last time when i loaded the data, it loaded few for the date range. rest did not load and sitting at ODS. this is full load and tried to load again. any suggestions...
sp

Hi Srinivas,
        check your update rules between ODS and cube whether they are mapped properly(check your date range for the cube load).
         Do a Init load and then do the delta load.
hope this will help.

We have some data loads from ODS to Cube (Deltas)

Dear Experts,
We can see request status green in DSO but in cube it is in yellow and not available for reporting (the request got compressed)
I want to make the status to green and available for reporting but i could'nt do it as i can see some popup message saying the request is already activated and change QM status not possible.
when i run the delta again that also becomes yellow status due to the previous request's was in yello status.
please suggest me how to change the status of compressed request and why it is happening.
Thank you in advance,
Kiran.

Hi,
Chk whether automatic request processing--->Set quality status Ok checked or not?
It might be in manage of cube, in the menu-->goto options somewhere
as I was not before the system ...I couln't guide u exactly...
rgds,
Edited by: Krishna Rao on Mar 30, 2010 3:47 PM

While loading data from DSO TO CUBE.(which Extraction option)

hi friends,
                 my questin is that when we load the data from one data target to another data target then we have four options to extract the data in DTP screen from (1.active data table (with archive) 2.active data table (without archive) 3.change log table. and fourth i dont remember.so my question is when we update data like from DSO TO CUBE. Then which option we should choose. 2nd or 3nd.?
<removed_by_moderator>
Edited by: Julius Bussche on Jan 4, 2012 9:26 AM

- If you want to do a full load always select 2nd option i.e. Active Data Table (without archive).
- If you wand to do a delta load, you can select either of 2 or 3
   Active Data Table (without archive) - first load will be full from active table and after that it will be delta from change log
   (ii) Changelog table - you will have to do a full load using a full DTP and then delta can be done using this DTP (but you will need to an init as well using this DTP)
- if you have done using a full DTP and now just want to run delta, select 3rd option and do an init before running delta
I hope it helps.
Regards,
Gaurav

Semantic Partitioning Delta issue while load data from DSO to Cube -BW 7.3

Hi All,
We have created the semantic partion with the help of BADI to perform Partitions. Everthing looks good,
first time i have loaded the data it is full update.
Second time i init the data load. I pulled the delta from DSO to Cube . DSO is standard where as Cube is partition with the help of semantic partition. What i can see is the records which are updated in Latest delta are shown into the report rest all are ignored by the system.
I tried compression but still it did not worked.
Can some has face this kind
Thanks

Yaseen & Soujanya,
It is very hard to guess the problem with the amount of information you have provided.
- What do you mean by cube is not being loaded? No records are extracted from DSO? Is the load completing with 0 records?
- How is data loaded from DSO to InfoCube? Full? Are you first loading to PSA or not?
- Is there data already in the InfoCube?
- Is there change log data for DSO or did someone delete all the PSA data?
Sincere there are so many reasons for the behavior you are witnessing, your best option is to approach your resident expert.
Good luck.
Sudhi Karkada
<a href="http://main.nationalmssociety.org/site/TR/Bike/TXHBikeEvents?px=5888378&pg=personal&fr_id=10222">Biking for MS Relief</a>

Issue while loading data from DSO to Cube

Gurus,
I'm facing a typical problem while loading Cube from a DSO. The load is based upon certain conditions.
Though the data in DSO satisfies those condition, but the Cube is still not being loaded.
All the loads are managed through Process Chains.
Would there be any reason in specific/particular for this type of problem?
Any pointers would be of greatest help !
Regards,
Yaseen & Soujanya

Yaseen & Soujanya,
It is very hard to guess the problem with the amount of information you have provided.
- What do you mean by cube is not being loaded? No records are extracted from DSO? Is the load completing with 0 records?
- How is data loaded from DSO to InfoCube? Full? Are you first loading to PSA or not?
- Is there data already in the InfoCube?
- Is there change log data for DSO or did someone delete all the PSA data?
Sincere there are so many reasons for the behavior you are witnessing, your best option is to approach your resident expert.
Good luck.
Sudhi Karkada
<a href="http://main.nationalmssociety.org/site/TR/Bike/TXHBikeEvents?px=5888378&pg=personal&fr_id=10222">Biking for MS Relief</a>

Data load from DSO to cube fails

Similar Messages

Maybe you are looking for