Data load Tuning

Hello All,
What are the Data Load Tuning ways from R/3 to BW we can possibly do, please help.
Thanks,
Suman

Hi,
To improve the data load performance
1. If they are full loads then try to see if you make them delta loads.
2. Check if there are complex routines/transformations being performed in any layer. In that case see if you can optimize those codes with the help of an abaper.
3. Ensure that you are following the standard procedures in the chain like deleting Indices/secondary Indices before loading etc.
For eg
1) Create Index
2) Delete Index
3) Aggregate Creation on Info Cube
4) Compressing Info Cube data
5) Rollup Data to Aggregates
6) Partitioning infoCube
7) Load Master data before loading Transactional Data
8) Adjusting Datapackage size
https://forums.sdn.sap.com/click.jspa?searchID=10049032&messageID=4373697
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3a699d90-0201-0010-bc99-d5c0e3a2c87b
4. Check whether the system processes are free when this load is running
5. Try making the load as parallel as possible if the load is happening serially. Remove PSA if not needed.
6. Goto manage ODS -> activate -> activate in parallel -> increase the number of processes from there.for direct access try TCode RSODSO_SETTINGS
7. Remove Bex Reporting check box in ODS if not required.
8. When the load is not getiing processed due to huge volume of data, or more number of records per data packet, Please try the below option.
1) Reduce the IDOC size to 8000 and number of data packets per IDOC as 10. This can be done in info package settings.
2) Run the load only to PSA.
3) Once the load is succesfull , then push the data to targets.
In this way you can overcome this issue.
Ensure the data packet sizing and also the number range buffering, PSA Partition size, upload sequence i.e, always load master data first, perform change run and then transaction data loads.
Use InfoPackages with disjoint selection criteria to parallelize the data export.
Complex database selections can be split to several less complex requests.
Number Range Buffering Performance
/thread/754694
Check this oss note : 130253.Review the oss note 857998 and 130253. The first note tells you how to find the dimensions and infoobjects that needs number range buffering.
Check this doc on BW data load perfomance optimization
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1955ba90-0201-0010-d3aa-8b2a4ef6bbb2
BI Performance Tuning
Business Intelligence Journal Improving Query Performance in Data Warehouses
http://www.tdwi.org/Publications/BIJournal/display.aspx?ID=7891
Achieving BI Query Performance Building Business Intelligence
http://www.dmreview.com/issues/20051001/1038109-1.html
SAP Business Intelligence Accelerator : A High - Performance Analytic Engine for SAP Ne tWeaver Business Intelligence
http://www.sap.com/platform/netweaver/pdf/BWP_AR_IDC_BI_Accelerator.pdf
BI Performance Audit
http://www.xtivia.com/downloads/Xtivia_BIT_Performance%20Audit.pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10564d5c-cf00-2a10-7b87-c94e38267742
https://websmp206.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000689436&
Thanks,
JituK

Similar Messages

Performance Tuning Data Load for ASO cube

Hi,
Anyone can help how to fine tune data load on ASO cube.
We have ASO cube which load around 110 million records from a total of 20 data files.
18 of the data files has 4 million records each and the last two has around 18 million records.
On average, to load 4 million records it took 130 seconds.
The data file has 157 data column representing period dimension.
With BSO cube, sorting the data file normally help. But with ASO, it does not seem to have
any impact. Any suggestion how to improve the data load performance for ASO cube?
Thanks,
Lian

Yes TimG it sure looks identical - except for the last BSO reference.
Well nevermind as long as those that count remember where the words come from.
To the Original Poster and to 960127 (come on create a profile already will you?):
The sort order WILL matter IF you are using a compression dimension. In this case the compression dimension acts just like a BSO Dense dimension. If you load part of it in one record then when the next record comes along it has to be added to the already existing part. The ASO "load buffer" is really a file named <dbname.dat> that is built in your temp tablespace.
The most recent x records that can fit in the ASO cache are still retained on the disk drive in the cache. So if the record is still there it will not have to be reread from the disk drive. So you could (instead of sorting) create an ASO cache as large as your final dat file. Then the record would already still be on the disk.
BUT WAIT BEFORE YOU GO RAISING YOUR ASO CACHE. All operating systems use memory mapped IO therefore even if it is not in the cache it will likely still be in on the disk in "Standby" memory (the dark blue memory as seen in Resource Monitor) this will continue until the system runs out of "Free" memory (light blue in resource monitor).
So in conclusion if your system still has Free memory there is no need (in a data load) to increase your ASO cache. And if you are out of Free memory then all you will do is slow down the other applications running on your system by increasing ASO Cache during a data load - so don't do it.
Finally, if you have enough memory so that the entire data file fits in StandBY + Free memory then don't bother to sort it first. But if you do not have enough then sort it.
Of course you have 20 data files so I hope that you do not have compression members spread out amongst these files!!!
Finally, you did not say if you were using parallel load threads. If you need to have 20 files read up on having parrallel load buffers and parallel load scripts. that will make it faster.
But if you do not really need 20 files and just broke them up to load parallel then create one single file and raise your DLTHREADSPREPARE and DLTHREADSWRITE settings. Heck these will help even if you do go parallel and really help if you don't but still keep 20 separate files.

Data Load Performance Tuning

Hi All,
My requirement is to extract the transaction data from the external MS SQL server to BI 7.0. UDC connection successfully established, datasources available, but I need to wait for long time to check preivew data in preview tab of datasource. Just to display the data in preview mode if datasource takes this much time than we are worried about the data load to DSO or Cube. Would anyone faced this problem, is there any performance settings am I missing. We are on BI 7.0 and on Unix OS, answers will be appreciated.
Thanks,
Eric.

Hi Sriee,
How can we restrict the data in BI datasource preview? I cannot see any filters button nor any option to restrict in preview tab? I also tried by restricting the no. of records in preview to 5 records. can you please mail me ([email protected]) the steps to improve data load performance in UDC.
Thanks,
Eric.

ERPI data load error

Hello,
We are loading one month data from peoplesoft to planning application using ERPI 11.1.2.1. It takes about 1 hrs to load one month data.Is it normal? When looking at ODI PS_GL_LOAD_BALANCES_DATA is always successful but COMM_LOAD_BALANCES fails at the end with this error.Did anyone have this error before. Message in HyS9aifWeb-sysout file is:
FROM AIF_HS_BALANCES
WHERE LOADID = 132
[EssbaseRuleFile] Locking rules file AIFData
[EssbaseRuleFile] Successfully locked rules file AIFData
[EssbaseRuleFile] Copying rules file OWBPLAND for data load as AIFData
[EssbaseRuleFile] Unlocking rules file AIFData
[EssbaseRuleFile] Successfully unlocked rules file AIFData
[EssbaseRuleFile] The data rules file has been created successfully.
[EssbaseRuleFile] Locking rules file AIFData
[EssbaseRuleFile] Successfully locked rules file AIFData
[EssbaseRuleFile] Load data into the cube by launching rules file...
<Mar 1, 2012 1:09:30 PM PST> <Error> <WebLogicServer> <BEA-000337> <[STUCK] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)' has been busy for "625" seconds working on the request "weblogic.servlet.internal.ServletRequestImpl@3bc2189[
POST /aif/services/HPLService HTTP/1.1
Content-type: text/xml;charset="utf-8"
Accept: text/xml, multipart/related, text/html, image/gif, image/jpeg, *; q=.2, */*; q=.2
Soapaction: "http://DEVAPPHPN001.indymacdev.biz:19000/aif/services/HPLServiceexecuteDataLoad"
User-Agent: JAX-WS RI 2.1.7-b01-
Content-Length: 638
Connection: Keep-Alive
Proxy-Client-IP: 10.205.101.108
X-Forwarded-For: 10.205.101.108
X-WebLogic-KeepAliveSecs: 30
X-WebLogic-Force-JVMID: 2124105652
]", which is more than the configured time (StuckThreadMaxTime) of "600" seconds. Stack trace:
Thread-176 "[STUCK] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'" <alive, suspended, priority=1, DAEMON> {
jrockit.net.SocketNativeIO.readBytesPinned(SocketNativeIO.java:???)
jrockit.net.SocketNativeIO.socketRead(SocketNativeIO.java:24)
java.net.SocketInputStream.socketRead0(SocketInputStream.java:???)
java.net.SocketInputStream.read(SocketInputStream.java:107)
com.essbase.services.olap.main.main_direct.EssNetClient.readFrom(Unknown Source)
com.essbase.services.olap.main.main_direct.EssNetClient.readPackage(Unknown Source)
com.essbase.services.olap.main.main_direct.EssNetClient.receiveResponse2(Unknown Source)
com.essbase.services.olap.main.main_direct.EssNetClient.adNetReceiveResponse(Unknown Source)
com.essbase.services.olap.main.main_direct.EssAPIData._adImport(Unknown Source)
com.essbase.services.olap.main.main_direct.EssAPIData.ImportToEssbaseASO(Unknown Source)
com.essbase.services.olap.main.main_direct.EssMAPIDir.BeginDataload(Unknown Source)
com.essbase.server.framework.EssOlapMainService.BeginDataload(Unknown Source)
com.essbase.server.framework.EssOrbPluginDirect.essMainBeginDataload(Unknown Source)
com.essbase.api.session.EssOrbPlugin._invokeMainMethod(Unknown Source)
com.essbase.api.session.EssOrbPlugin._invokeMethod2(Unknown Source)
com.essbase.api.session.EssOrbPlugin._invokeMethod(Unknown Source)
com.essbase.server.framework.EssOrbPluginDirect._invokeProtected(Unknown Source)
com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
com.essbase.api.session.EssOrbPluginEmbedded.invokeMethod(Unknown Source)
com.essbase.api.session.EssOrbPlugin.essMainBeginDataload(Unknown Source)
com.essbase.api.datasource.EssCube.beginDataload(Unknown Source)
com.hyperion.aif.essbase.EssbaseRuleFile.executeDataRuleFile(EssbaseRuleFile.java:314)
com.hyperion.aif.webservices.HPLService.executeDataLoad(HPLService.java:167)
sun.reflect.GeneratedMethodAccessor7310.invoke(Unknown Source)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:575)
org.apache.axis.providers.java.RPCProvider.invokeMethod(RPCProvider.java:397)
org.apache.axis.providers.java.RPCProvider.processMessage(RPCProvider.java:71)
org.apache.axis.providers.java.JavaProvider.invoke(JavaProvider.java:265)
org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:113)
org.apache.axis.SimpleChain.invoke(SimpleChain.java:78)
org.apache.axis.handlers.soap.SOAPService.invoke(SOAPService.java:435)
org.apache.axis.server.AxisServer.invoke(AxisServer.java:132)
org.apache.axis.transport.http.AxisServlet.doPost(AxisServlet.java:586)
javax.servlet.http.HttpServlet.service(HttpServlet.java:700)
org.apache.axis.transport.http.AxisServletBase.service(AxisServletBase.java:325)
javax.servlet.http.HttpServlet.service(HttpServlet.java:815)
weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:224)
weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:108)
weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:206)
weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:55)
oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:299)
oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:405)
oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:98)
oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:55)
oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:86)
weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:55)
weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:25)
weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:55)
weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3687)
weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:308)
weblogic.security.service.SecurityManager.runAs(SecurityManager.java:116)
weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2213)
weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2135)
weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1420)
weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
weblogic.work.ExecuteThread.run(ExecuteThread.java:168)
Any feedback is appreciated.Thank you for taking ime to read through.
Regards.

Hello,
Part of the message you are getting is because the WebLogic process is a bit intuitive. It knows when something is running and waits. It also assumes anything running for a certain period of time is considered "stalled/stuck" and reports it. The time it waits is dependant on the Weblogic configuration.
As for the time it takes to load data... that is very vague. Without knowing more about your environment that is very hard to state. We know nothing about the hardware, platform, dataset size, etc. You would need to review ODI to find out what is taking the long amount of time and try and replicate it outside of ERPi/ODI to see if you get the same results.
Thank you,

How to Handle Data Loads in BW

Hi friends,
we are almost on the verge of completing the development, and are planning to go live very soon, but before that we need to make sure the number of records getting loaded (from R/3 to BW)are in sync. If the user says that there are so many records for the Area currently, how do we handle this to happen in BW?? when the number of data packets keeps increasing how do we update the same to our targets,
If there are any steps or procedures to habdle the data loads , after and before GOLIVE , can someone please let me know(Data sizing, Loading, and archiving),
If the client tells that these many records are expected, how should we handle these situations??
Your input is really appreciated.
Thanks alot in advance,

Hi,
Best way to ensure that is after your data has been loaded to BW, run a report and verify the results. They should match per the logic or any filter criteria with the R3 area numbers.
In most cases the number of records might not match so doing a comparision of how many records were sent and how many got uploaded through the monitor will not be a good comparision.
For increasing data volumes go through the following thread on Performance tuning :
performance tuning
Data Reconciliation :
Reconciliation of a BW and R3 data
Re: Reg -- reconciliation process.
Cheers,
Kedar

Data loading doubts

Hi Gurus
Just trying to join the pieces to understand the system more accurately.Would you pl help m to clear my following doubts?
1.what is RSRV testing and where can we use it? How to do it?
2.From where an we schedule the process chain ? Can I have the path to schedule it? And if we are scheduling process chain then is there a need to schedle the info pkg?
3.What is time stamp and how it works ?
Thanks in advance
KK

Hi Krishna,
It is not reqd to do this after every data load. But lets say you want to see the number of records in the cube tables (for performance tuning) then you can use an RSRV test: RSRV > Elementary Tests > database > Database information about InfoProvider tables.
Or sometimes the SIDs of InfoObject values are corrupted and you can try to repair with the RSRV test for Master data.
If you open up eahc test in RSRV, you can click on the Help button (rightmost) and read a description.
Hope this helps...

Data Load - ALE inbox of SAP BW is identical to ALE outbox of the SS

Hello,
I am doing a init for a cube, and the load is still running without ending.
no errors given but when I look at the step by stpe analysis it gives the following message.
Diagnosis
    No errors could be found. The current process has probably not finished
    yet.
System response
    The ALE inbox of the SAP BW is identical to the ALE outbox of the source
    system
    and/or
    the maximum wait time for this request has not yet run out
    and/or
    the batch job in the source system has not yet ended.
Thanks,
VJ

Hi Vijay,
The message you are seeing is a standard message that is shown while the data load is in running state in the monitor.
Periodically refresh the monitor screen and check whether records are getting extracted.Example if records getting extracted really slow,you will see the figure 'XYZ(records) from XYZ' slowly increasing.
Also keep checking detail tab to see if steps are slowly turning GREEN or not.
If load still stuck in yellow,maybe u need to re-run it and look into performance tuning options.
cheers,
Vishvesh

Load balancing BW data loads

Hi all,
I have a BW 3.5 system running on Oracle 9.2.0.5.
What I would like to do is to set BW to pick a particular R/3 application server for my data loads.
Is it possible?
Best Regards
Mark

Hi Mark,
Load balancing can be done at BW side to pick any specific application server.
You have an SAP BW system with several (application) servers. You would like to distribute the workload of the data loads and other data warehouse management activities in a way that fits your needs best. This could mean that you would like to have all processes distributed across all available servers or that you would like to have one dedicated server for these processes.
Check: [Load Balancing|http://www.scribd.com/doc/7838988/KnowHow-to-SAP-BW-Data-Load-Performance-Analysis-and-Tuning]
[Load balancing 1|http://rapidshare.com/files/157988927/load_balancing_in_BW_data_loads.pdf]
Hope it Helps
Srini

Data load problem - BW and Source System on the same AS

Hi experts,
Im starting with BW (7.0) in a sandbox environment where BW and the source system are installed on the same server (same AS). The source system is the SRM (Supplier Relationship Management) 5.0.
BW is working on client 001 while SRM is on client 100 and I want to load data from the SRM into BW.
Ive configured the RFC connections and the BWREMOTE users with their corresponding profiles in both clients, added a SAP source system (named SRMCLNT100), installed SRM Business Content, replicated the data sources from this source system and everything worked fine.
Now I want to load data from SRM (client 100) into BW (client 001) using standard data sources and extractors. To do this, Ive created an InfoPackage in one standard metadata data source (with data, checked through RSA3 on client 100 source system). Ive started the data load process, but the monitor says that no Idocs arrived from the source system and keeps the status yellow forever.
Additional information:
BW Monitor Status:
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System Response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
BW Monitor Details:
0 from 0 records
but there are 2 records on RSA3 for this data source
Overall status: Missing messages or warnings
- Requests (messages): Everything OK
o Data request arranged
o Confirmed with: OK
- Extraction (messages): Missing messages
o Missing message: Request received
o Missing message: Number of sent records
o Missing message: Selection completed
- Transfer (IDocs and TRFC): Missing messages or warnings
o Request IDoc: sent, not arrived ; Data passed to port OK
- Processing (data packet): No data
Transactional RFC (sm58):
Function Module: IDOC_INBOUND_ASYNCHRONOUS
Target System: SRMCLNT100
Date Time: 08.03.2006 14:55:56
Status text: No service for system SAPSRM, client 001 in Integration Directory
Transaction ID: C8C415C718DC440F1AAC064E
Host: srm
Program: SAPMSSY1
Client: 001
Rpts: 0000
System Log (sm21):
14:55:56 DIA 000 100 BWREMOTE D0 1 Transaction Canceled IDOC_ADAPTER 601 ( SAPSRM 001 )
Documentation for system log message D0 1 :
The transaction has been terminated. This may be caused by a termination message from the application (MESSAGE Axxx) or by an error detected by the SAP System due to which it makes no sense to proceed with the transaction. The actual reason for the termination is indicated by the T100 message and the parameters.
Additional documentation for message IDOC_ADAPTER 601 No service for system &1, client &2 in Integration Directory No documentation exists for message ID601
RFC Destinations (sm59):
Both RFC destinations look fine, with connection and authorization tests successful.
RFC Users (su01):
BW: BWREMOTE with profile S_BI-WHM_RFC (plus SAP_ALL and SAP_NEW temporarily)
Source System: BWREMOTE with profile S_BI-WX_RFCA (plus SAP_ALL and SAP_NEW temporarily)
Someone could help ?
Thanks,
Guilherme

Guilherme
I didn't see any reason why it's not bringing. Are you doing full extraction or Delta. If delta extraction please check the extractor is delta enabled or not. Some times this may cause problems.
Also check this weblog on data Load errors basic checks. it may help
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Thanks
Sat

BI 7.0 data load issue: InfoPackage can only load data to PSA?

BI 7.0 backend extraction gurus,
We created a generic datasource on R3 and replicated it to our BI system, created an InfoSource, the Transformation from the datasource to the InfoSource, an ODS, the transformation from the InfoSource to the ODS.
After the transformation creation between the InfoSource and the ODS is done on this BI system, a new folder called "Data Transfer Process" is also created under this ODS in the InfoProvider view. In the Data Transfer Process, in the Extraction tab, picks 'Full' in the field Extraction Mode, in the Execute tab, there is a button 'Execute', click this button (note: so far we have not created InfoPackage yet) which sounds like to conduct the data load, but find there is no data available even if all the status show green (we do have a couple of records in the R3 table).
Then we tried to create an InfoPackage, in the Processing tab, find 'Only PSA' radio button is checked and all others like 'PSA and then into Data Targets (Package by Package)" are dimmed! In the Data Target tab, find the ODS as a target can't be selected! Also there are some new columns in this tab, 'Maintain Old Update Rule' is marked with red color 'X', under another column 'DTP(S) are active and load to this target', there is an inactive picture icon, that's weird since we have already activated the Data Transfer Process! Anyway, we started the data load in the InfoPackage, and the monitor shows the records are brought in, but since in the Process tab in the InfoPackage, 'Only PSA' radio button is checked with all others dimmed that there is no any data going to this ODS! Why in BI 7.0, 'Only PSA' radio button can be checked with others all dimmed?
Many new features with BI 7.0! Any one's idea/experience is greatly appreciate on how to load data in BI 7.0!

You dont have to select anything..
Once loaded to PSA in DTP you have the option of FULL or DELTA ,full loads all the data from PSA and DELTA loads only the last load of PSA.
Go through the links for Lucid explainations
Infopackage -
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/03808225cf5167e10000000a1553f6/content.htm
DTP
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/f98e07cc483255e10000000a1553f7/frameset.htm
Creating DTP
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/fa50e40f501a77e10000000a422035/content.htm
Pre-requisite-
You have used transformations to define the data flow between the source and target object.
Creating transformations-
http://help.sap.com/saphelp_nw2004s/helpdata/en/f8/7913426e48db2ce10000000a1550b0/content.htm
Hope it Helps
Chetan
@CP..

Open HUB ( SAP BW ) to SAP HANA through DB Connection data loading , Delete data from table option is not working Please help any one from this forum

Issue:
I have SAP BW system and SAP HANA System
SAP BW to SAP HANA connecting through a DB Connection (named HANA)
Whenever I created any Open Hub as Destination like DB Table with the help of DB Connection, table will be created at HANA Schema level ( L_F50800_D )
Executed the Open Hub service without checking DELETING Data from table option
Data loaded with 16 Records from BW to HANA same
Second time again executed from BW to HANA now 32 records came ( it is going to append )
Executed the Open Hub service with checking DELETING Data from table option
Now am getting short Dump DBIF_RSQL_TABLE_KNOWN getting
If checking in SAP BW system tio SAP BW system it is working fine ..
will this option supports through DB Connection or not ?
Please follow the attachemnet along with this discussion and help me to resolve how ?
From
Santhosh Kumar

Hi Ramanjaneyulu ,
First of all thanks for the reply ,
Here the issue is At OH level ( Definition Level - DESTINATION TAB and FIELD DEFINITION )
in that there is check box i have selected already that is what my issue even though selected also
not performing the deletion from target level .
SAP BW - to SAP HANA via DBC connection
1. first time from BW suppose 16 records - Dtp Executed -loaded up to HANA - 16 same
2. second time again executed from BW - now hana side appaended means 16+16 = 32
3. so that i used to select the check box at OH level like Deleting data from table
4. Now excuted the DTP it throws an Short Dump - DBIF_RSQL_TABLE_KNOWN
Now please tell me how to resolve this ? will this option is applicable for HANA mean to say like , deleting data from table option ...
Thanks
Santhosh Kumar

Data load times

Hi,
I have a question regarding data loads. We have a process cahin which includes 3 ods and cube.
Basically ODS A gets loaded from R/3 and the from ODS A it then loads into 2 other ODS B, ODS C and CUBE A.
So when I went to monitor screen of this load ODS A-> ODS B,ODS C,CUBE A. The total time shows as 24 minutes.
We have some other steps in process chain where ODS B-> ODS C, ODS C- CUBE 1.
When I go the monitor screen of these data loads the total time the tortal time for data loads show as 40 minutes.
I *am suprised because the total run time for the chain itself is 40 minutes where in the chain it incclude data extraction form R/3 and ODS's Activations...indexex....
*Can anybody throw me some light?
Thank you all
Edited by: amrutha pal on Sep 30, 2008 4:23 PM

Hi All,
I am not asking like which steps needed to be included in which chain.
My question is when look at the process chain run time it says the total time is equal to 40 minutes and when you go RSMO to check the time taken for data load from ODS----> 3 other data targets it is showing 40 minutes.
The process chain also includes ods activation buliding indexex,extracting data from R/3.
So what are times we see when you click on a step in process chain and displaying messages and what is time you see in RSMO.
Let's take a example:
In Process chain A- there is step LOAD DATA- from ODS A----> ODS B,ODS C,Cube A.
When I right click on the display messages for successful load it shows all the messages like
Job started.....
Job ended.....
The total time here it shows 15 minutes.
when I go to RSMO for same step it shows 30 mintues....
I am confused....
Please help me???

Master Data loading got failed: error "Update mode R is not supported by th

Hello Experts,
I use to load master data for 0Customer_Attr though daily process chain, it was running successfully.
For last 2 days master data loading for 0Customer_Attr got failed and it gives following error message:
"Update mode R is not supported by the extraction API"
Can anyone tell me what is that error for? how to resolve this issue?
Regards,
Nirav

Hi
Update mode R error will come in the below case
You are running a delta (for master data) which afils due to some error. to resolve that error, you make the load red and try to repeat the load.
This time the load will fail with update mode R.
As repeat delta is not supported.
So, now, the only thing you can do is to reinit the delta(as told in above posts) and then you can proceed. The earlier problem has nothing to do with update mode R.
example your fiorst delta failed with replication issue.
only replicating and repeaing will not solve the update mode R.
you will have to do both replication of the data source and re-int for the update mode R.
One more thing I would like to add is.
If the the delat which failed with error the first time(not update mode R), then
you have to do init with data transfer
if it failed without picking any records,
then do init without data transfer.
Hope this helps
Regards
Shilpa
Edited by: Shilpa Vinayak on Oct 14, 2008 12:48 PM

CALL_FUNCTION_CONFLICT_TYPE Standard Data loading

Hi,
I am facing a data loading problem using Business content on CPS_DATE infocube (0PS_DAT_MLS datasource).
The R/3 extraction processes without any error, but the problem occurs in the update rules while updating the milestone date. Please find hereunder the log from the ST22.
The real weird thing is that the process works perfectly in development environment and not in integration one (the patch levels are strongly the same: BW 3.5 Patch #16).
I apologise for the long message below... this is a part of the system log.
For information the routine_0004 is a standard one.
Thanks a lot in advanced!
Cheers.
 CALL_FUNCTION_CONFLICT_TYPE
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
Symptoms. Type conflict when calling a function module
Causes Error in ABAP application program.
 The current ABAP program "GP420EQ35FHFOCVEBCR6RWPVQBR" had to be terminated because one of the statements could not be executed.
 This is probably due to an error in the ABAP program.
 A function module was called incorrectly.
Errors analysis
 An exception occurred. This exception is dealt with in more detail below
 . The exception, which is assigned to the class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was neither caught nor passed along using a RAISING clause, in the procedure "ROUTINE_0004"
 "(FORM)" .
 Since the caller of the procedure could not have expected this exception
 to occur, the running program was terminated. The reason for the exception is:
 The call to the function module "RS_BCT_TIMCONV_PS_CONV" is incorrect:
The function module interface allows you to specify only fields of a particular type under "E_FISCPER".
 The field "RESULT" specified here is a different field type.
How to correct the error.
You may able to find an interim solution to the problem in the SAP note system. If you have access to the note system yourself, use the following search criteria:
 "CALL_FUNCTION_CONFLICT_TYPE" CX_SY_DYN_CALL_ILLEGAL_TYPEC
 "GP420EQ35FHFOCVEBCR6RWPVQBR" or "GP420EQ35FHFOCVEBCR6RWPVQBR"
 "ROUTINE_0004"
 If you cannot solve the problem yourself and you wish to send
 an error message to SAP, include the following documents:
 1. A printout of the problem description (short dump)
 To obtain this, select in the current display "System->List->
 Save->Local File (unconverted)". 2. A suitable printout of the system log To obtain this, call the system log through transaction SM21. Limit the time interval to 10 minutes before and 5 minutes after the short dump. In the display, then select the function
 "System->List->Save->Local File (unconverted)".
 3. If the programs are your own programs or modified SAP programs, supply the source code.
 To do this, select the Editor function "Further Utilities-> Upload/Download->Download".
 4. Details regarding the conditions under which the error occurred
 or which actions and input led to the error.
 The exception must either be prevented, caught within the procedure
 "ROUTINE_0004"
 "(FORM)", or declared in the procedure's RAISING clause.
 To prevent the exception, note the following:
Environment system SAP Release.............. "640"
Operating system......... "SunOS" Release.................. "5.9"
Hardware type............ "sun4u"
Character length......... 8 Bits
Pointer length........... 64 Bits
Work process number...... 2
Short dump setting....... "full"
Database type............ "ORACLE"
Database name............ "BWI"
Database owner........... "SAPTB1"
Character set............ "fr"
SAP kernel............... "640"
Created on............... "Jan 15 2006 21:42:36" Created in............... "SunOS 5.8 Generic_108528-16 sun4u"
Database version......... "OCI_920 "
Patch level.............. "109"
Patch text............... " "
Supported environment....
Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version..... "640"
Operating system......... "SunOS 5.8, SunOS 5.9, SunOS 5.10"
SAP Release.............. "640"
The termination occurred in the ABAP program "GP420EQ35FHFOCVEBCR6RWPVQBR" in
 "ROUTINE_0004".
 The main program was "RSMO1_RSM2 ".
The termination occurred in line 702 of the source code of the (Include)
 program "GP420EQ35FHFOCVEBCR6RWPVQBR"
 of the source code of program "GP420EQ35FHFOCVEBCR6RWPVQBR" (when calling the editor 7020).
 Processing was terminated because the exception "CX_SY_DYN_CALL_ILLEGAL_TYPE" occurred in the procedure "ROUTINE_0004" "(FORM)" but was not handled locally, not declared in the RAISING clause of the procedure.
 The procedure is in the program "GP420EQ35FHFOCVEBCR6RWPVQBR ". Its source code starts in line 685 of the (Include) program "GP420EQ35FHFOCVEBCR6RWPVQBR ".
672 'ROUTINE_0003' g_s_is-recno
673 rs_c_false rs_c_false g_s_is-recno
674 changing c_abort.
675 catch cx_foev_error_in_function.
676 perform error_message using 'RSAU' 'E' '510'
677 'ROUTINE_0003' g_s_is-recno
678 rs_c_false rs_c_false g_s_is-recno
679 changing c_abort.
680 endtry.
681 endform.
682 ************************************************************************
683 * routine no.: 0004
684 ************************************************************************
685 form routine_0004
686 changing
687 result type g_s_hashed_cube-FISCPER3
688 returncode like sy-subrc
689 c_t_idocstate type rsarr_t_idocstate
690 c_subrc like sy-subrc
691 c_abort like sy-subrc. "#EC *
692 data:
693 l_t_rsmondata like rsmonview occurs 0 with header line. "#EC *
694
695 try.
696 * init
variables
697 move-corresponding g_s_is to comm_structure.
698
699 * fill the internal table "MONITOR", to make monitor entries
700
701 * result value of the routine
>>>> CALL FUNCTION 'RS_BCT_TIMCONV_PS_CONV'
703 EXPORTING
704 I_TIMNM_FROM = '0CALDAY'
705 I_TIMNM_TO = '0FISCPER'
706 I_TIMVL = COMM_STRUCTURE-CALDAY
707 I_FISCVARNT = gd_fiscvarnt
708 IMPORTING
709 E_FISCPER = RESULT.
710 * if the returncode is not equal zero, the result will not be updated
711 RETURNCODE = 0.
712 * if abort is not equal zero, the update process will be canceled
713 ABORT = 0.
714
715 catch cx_sy_conversion_error
716 cx_sy_arithmetic_error.
717 perform error_message using 'RSAU' 'E' '507'
718 'ROUTINE_0004' g_s_is-recno
719 rs_c_false rs_c_false g_s_is-recno
720 changing c_abort.
721 catch cx_foev_error_in_function.
System zones content
Name Val.
SY-SUBRC 0
SY-INDEX 2
SY-TABIX 0
SY-DBCNT 0
SY-FDPOS 65
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY 0400
SY-UCOMM OK
SY-TITLE Moniteur - Atelier d'administration
SY-MSGTY E
SY-MSGID RSAU
SY-MSGNO 583
SY-MSGV1 BATVC 0000000000
SY-MSGV2 0PROJECT
SY-MSGV3
SY-MSGV4
Selected variables
Nº 23 Tpe FORM
Name ROUTINE_0004
GD_FISCVARNT
 22
 00 RS_C_INFO I
 4
 9
COMM_STRUCTURE-CALDAY
20060303
33333333
20060303
SYST-REPID GP420EQ35FHFOCVEBCR6RWPVQBR 4533345334444454445355555452222222222222 704205135686F365232627061220000000000000
RESULT
000
333
00

You have an update routine in which youar callin FM 'RS_BCT_TIMCONV_PS_CONV'. Parameter e_fiscper must be the same that type of the variable you use (you can see the data tyoe in FM definition, transaction se37). You should do somethin like the following.
DATA: var type <the same that e_fiscper in FM definition>
CALL FUNCTION 'RS_BCT_TIMCONV_PS_CONV'
EXPORTING
I_TIMNM_FROM = '0CALDAY'
I_TIMNM_TO = '0FISCPER'
I_TIMVL = COMM_STRUCTURE-CALDAY
I_FISCVARNT = gd_fiscvarnt
IMPORTING
E_FISCPER = var.
result = var.
--- ASSIGN POINTS IS USEFUL.

Data load stuck from DSO to Master data Infoobject

Hello Experts,
We have this issue where data load is stuck between a DSO and master data infoobject
Data uploads from DSO( std) to master data infoobject.
This Infoobject has display and nav attributes in it which are mapped from DSO to Infoobject.
Now we have added a new infoobject as attribute to the master data infoobject and made it as NAV attri.
Now when we are doing full load via DTP the load is stuck and is not processing.
Earlier it took only 5 mns of time to complete the full load.
Please advise what could be the reason and cause behind this.
Regards,
santhosh.

Hello guys,
Thanks for the quick response.
But its nothing proceeding further.
The request is still running.
earlier this same data is loaded in 5 mns.
Please find the screen shot.
master data for the infoobjects are loaded as well.
I can see in SM50 the process at P table of the infoobject the process is.
Please advise.
Please find the detials
Updating attributes for InfoObject YCVGUID
Start of Master Data Update
Check Duplicate Key Values
Check Data Values
Process time dependent attributes- green.
No Message: Process Time-Dependent Attributes- yellow
No Message: Generates Navigation Data- yellow
No Message: Update Master Data Attributes - yellow
No Message: End of Master Data Update - yellow
and nothing is going further in Sm37
Thanks,
Santhosh.

Data load Tuning

Similar Messages

Maybe you are looking for