Data Load using 0HR_PT_1 & 0HR_PT_2

Hi,
I am trying to load data using the following BC data sources
0HR_PT_1 -Times from Personal Work Schedule
0HR_PT_2-Actual Personnel Times
But the problem is i am getting a very very huge data say about 10000000000 recors...some thing
Go i need to use any filters...
Thanks

Hi,
Thanks for the info provided.
I am testing this data in developement,Before i proceed could you please advise me based on my report requirment can i use this data source or can you suggest that do i am looking at the wrong option
My BW Reoprt requirment
HRP1000 - OBJID, OTYPE, STEXTBEGDA
HRP1007-STATUS
HRP1011-SOBID, RELAT
HRP1005-TRFGL
PA0002 NACHN, VORNA
PA0007 - WOSTD ( Number of hours per week)
HRP1011 - MOVAG (Number of hours per month)
How can i acieve this

Similar Messages

Data load using 0HR_PA_OS_1 data source

Hi,
I am trying to load data (Full Load) using 0HR_PA_OS_1 (Staffing Assignments) data source, But it is extracting 0 records.
I checked in RSA3 (R/3) it is stilling showing 0 recordsbut there is significant amount of data already present in BW Cube (50000 Records)
Do I need to perform any pre requisites to perform data load using 0HR_PA_OS_1
Thanks

Refered SAP Note 429145

Unable to load CSV data using APEX Data Load using Firefox/Safari on a MAC

I have APEX installed on a Windows XP machine connected to an 11g database on the same Windows XP machine.
While on the windows XP, using IE 7, I am able to successfully load a CSV spreadsheet of data using the APEX Data Load utility.
However, if I switch to my MacBook Pro running OS X leopard, then login into same APEX machine using Firefox 2 or 3 or Safari 3, then try to upload CSV data, it fails on the "Table Properties" step when it asks you for the name of the new table and then asks you to set table properties, the table properties just never appear (they do appear in IE 7 on Windows XP) and if you try to hit the NEXT button, you get error message: "1 error has occurred. At least one column must be specified to include in new table." and of course, you can't specify the any of the columns because there is nothing under SET TABLE PROPERTIES in the interface.
I also tried to load data with Firefox 2, Firefox 3 (beta), and Safari 3.1, but get same failed result on all three. If I return to the Windows XP machine and use IE 7.0, Data Load works just fine. I work in an ALL MAC environment, it was difficult to get a windows machine into my workplace, and all my end users will be using MACs. There is no current version of IE for the MAC, so I have to use Firefox or Safari.
Is there some option in Firefox or Safari that I can turn on so this Data Load feature will work on the MAC?
Thanks for your help. Any assistance appreciated.
Tony

I managed to get this to work by saving the CSV file as Windows CSV (not DOS CSV), which allowed the CSV data to be read by Oracle running on Windows XP. I think the problem had to do with different character sets being used for CSV on MAC versus CSV on Windows. Maybe if I had created my windows XP Oracle database with Unicode as the default character set, I never would have experienced this problem.

Selective data load using DTP

Hi,
We have created a data flow from once cube to other cube using Transformations. Now we would like to do selective data load from source cube to target cube. The problem is that in DTP we are not able to give the selective weeks in the Filter area because we can give filter conditions in change mode only and in production system we canu2019t go to change mode for DTP. So we struck up there. Can any one of you tell me how to do selective data load in this scenario
Thanks in advance

Hi,
As a try, createe a new DTP and try to get in to change mode.It might accept that way.
otherway round,you can go the way as manisha explained in previous post.
Do the load and do a selective deletion. you can do selective deletion using a program.
Cheers,
Srinath.

Data load uses wrong character set, where to correct? APEX bug/omission?

Hi,
I created a set of Data Load pages in my application, so the users can upload a CSV file.
But unlike the Load spreadsheet data (under SQL Workshop\Utilities\Data Workshop), where you can set the 'File Character Set', I didn't see where to set the Character set for Data Load pages in my application.
Now there is a character set mismatch, "m³/h" and "°C" become "m�/h" and "�C"
Where to set?
Seems like an APEX bug or at least omission, IMHO the Data Load page should ask for the character set, as clients with different character sets could be uploading CSV.
Apex 4.1 (testing on the apex.oracle.com website)

Hello JP,
Please give us some more details about your database version and its character set, and the character set of the CSV file.
>> …But unlike the Load spreadsheet data (under SQL Workshop\Utilities\Data Workshop), where you can set the 'File Character Set', I didn't see where to set the Character set for Data Load pages in my application.
It seems that you are right. I was not able to find any reference to the (expected/default) character set of the uploaded file in the current APEX documentation.
>> If it's an APEX omission, where could I report that?
Usually, an entry on this forum is enough as some of the development team members are frequent participants. Just to be sure, I’ll draw the attention of one of them to the thread.
Regards,
Arie.
&diams; Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
&diams; Author of Oracle Application Express 3.2 – The Essentials and More

GL Data load using ODI to Essbase

Hi, I am trying to load GL actual data to essbase application using ODI. Source file is having 10 columns and the Target is having 11 columns. We are using rules file to load data into essbase. Rules file will split 9th column as two columns and will load the data into Essbase. When we test the rules file in essbase data is getting load into application. when we use the same rule file in ODI interface data is not getting load and giving error as "Unknown member" for the member which we are spliting in 9th column. Source file: HSP_RATES ACCOUNT PERIOD YEAR SCENARIO VERSION CURRENCY ENTITY SFUND PROGRAM DATA HSP_InputValue 611101 Jul FY13 ACTUAL Final Local 0000 SBNR AC0001PS0001 25000 AC0001PS0001 is the concatenated string from GL. we will split this as two columns using rules file to load into essbase application. Please suggest what might be the reason for the error. How to do the mapping between source and target. I have mapping one column(AC0001PS0001) to two dimensions (Program, Activity) in Essbase. Please suggest. Thanks Sri

In ODI, what you have to do is to split it in the ODI itself. While you are mapping, you can use SQL functions to map it to two different columns. Similar to the way you are doing it in Rule file.
Regards
Amarnath
ORACLE | Essbase

Data loading using ODI

Hi,
I am using ODI 10g for loading data into oracle 10g database from a flat file. The flat file is in fixed format, but the data is in a single row, so the data is not loaded correctly. For example, 1000 records are shown in 1 line.
Can someone please suggest, what customization should I make to the IKM to achieve this.
Please let me know the questions you may have.
Thanks a lot.

Hi John,
I reversed my Planning model and able to see those columns now. I tried executing my interface and got the below error
The source result set contains column [EMPLOYEE_ACCOUNT] which has no corresponding column on the planning side.
My source is an oracle table and i have seperate columns for each dimension member. What I did is, mapped the Data column (JobTitle) from source to the Target column(JobTitle) and rest all dimension member columns from source to Point of View column seperated by a comma. My Planning cube name is EMPLOYEE, so in th data cube name column i manually entered "EMPLOYEE" and tried executing it.
Please guide me as always
Thanks,
Sravan

Need faster data loading (using sql-loader)

i am trying to load approx. 230 million records (around 60-bytes per record) from a flat file into a single table. i have tried sql-loader (conventional load) and i'm seeing performance degrade as the file is being processed. i am avoiding direct path sql-loading because i need to maintain uniqueness using my primary key index during the load. so the degradation of the load performance doesn't shock me. the source data file contains duplicate records and may contain records that are duplicates of those that are already in the table (i am appending during sql-loader).
my other option is to unload the entire table to a flat file, concatenate the new file onto it, run it through a unique sort, and then direct-path load it.
has anyone had a similar experience? any cool solutions available that are quick?
thanks,
jeff

It would be faster to suck into a Oracle table, call it a temporary table and then make a final move into the final table.
This way you could direct load into an oracle table then you could
INSERT /*+ APPEND */ INTO Final_Table
    SELECT DISTINCT *
    FROM   Temp_Table
    ORDER BY ID;This would do a 'direct load' type move from your temp teable to the final table, which automatically merging the duplicate records;
So
1) Direct Load from SQL*Loader into temp table.
2) Place index (non-unique) on temp table column ID.
3) Direct load INSERT into the final table.
Step 2 may make this process faster or slower, only testing will tell.
Good Luck,
Eric Kamradt

Extraction problem - selection conditions for data load using abap program

Hi All,
I have a problem loading data over a selected period where the selection of date range is done using ABAP routine (type 6). Here though in the request header tab in monitor screen i'm able to see the selection date range populated correctly, no records are being extracted. But if i delete the abap filter and directly give the same date range for selection we are able to extract data. if any body has faced similar problem and have a solution for it please help me with yur suggestion.
Thanks,
nithin.

It seems the the data range is not properly set in the routine.
You can check the value of selection period generated by routine in the data selection tab-> execute button is there .
Click it to to test the selection values generated by the ABAP routine..
If the value here seems correct one then paste the code of the routine that u have written with brief logic details that u have applied.
Sonal.....

Data Load using only 1 data package

Hi,
I am moving data from one cube to another manually using an infopackage. This system has recently been upgraded from 3.0 to 3.5.
It is only using 1 datapackage (I am loading 19m records) and have done this successfully before and it used 4 datapackages.
Settings in SBIW show that MAXPROC for myself system is set to 4. Entries in ROOSPRMS show MAXPROC as being 1.
With these settings in the failover system (3.0B), it uses 3 datapackages. With these settings in teh production system (3.5), it uses 1 datapackage.
Does anyone have any ideas as to how to get it to use 4 datapackages ?
regards
Sue

Check Default Datasource data transefer in the scheduler menu item in the Infopacakge; here you can find max number of records and max size of datapackage.
Hope it helps.
Regards

Data Loading using Sql Loader

Hi
I have the following column in my data file
C1,C2,C3,C4,C5,C6
the columns in my table are
A1,A2,A5,A6
the datatype for the columns are varchar.
the value to be inserted is as follow
C1=A1
C2=A2
C5=A5
C6=A6
MY ctl file is as follows
OPTIONS(SKIP=1, ERRORS=99, ROWS=100)
LOAD DATA
APPEND
INTO TABLE xxx
FIELDS TERMINATED BY ','
OPTIONALLY ENCLOSED BY '"'
TRAILING NULLCOLS
A1 "C1",
A2 "C2",
A3 FILLER,
A4 FILLER,
A5 "C5",
A6 "C6"
I got the below error
SQL*Loader-350: Syntax error at line
Expecting "," or ")", found "FILLER".
Requirement is there is not need of the column C3,C4...
(Note i cannot delete the column )
Pls do help me out.
Regards
Yram

Something like the below probably could help you if you don’t want to use the keyword FILLER in the CTL file, take a look –
The idea is to use the FULL text to load and then extract the columns from the position required within the string –
Table –
SQL> desc test
Name                                      Null?    Type
COL1                                               VARCHAR2(10)
COL2                                               VARCHAR2(10)
COL3                                               VARCHAR2(10)
COL4                                               VARCHAR2(10)
COL5                                               VARCHAR2(10)
COL6                                               VARCHAR2(10)
COL7                                               VARCHAR2(10)
COL8                                               VARCHAR2(10)
COL9                                               VARCHAR2(10)
COL10                                              VARCHAR2(10)
Data File
Col1x,Col2x,Col3x,col4x,col5x,col6x,col7x,col8x,col9x,col10x
Mapping
Col1                : Collx
Col3                : Col3x
Col5                : Col8x
Col8                : Col10x
*** Rest all the columns not mapped to the Data file
The Control File
Load Data
INFILE '/temp/Shailender/test.dat'
Into TABLE Test
APPEND
TRAILING NULLCOLS
Col1   position(1:61)   "Substr(:Col1, 1, INSTR(:col1,',',1)-1)"
,Col3   position(1:61)   "Substr(:Col3, INSTR(:col3,',',1,2)+1, ( INSTR(:col3,',',1,3)-INSTR(:col3,',',1,2)-1 ))"
,Col5   position(1:61)   "Substr(:Col5, INSTR(:col5,',',1,7)+1, ( INSTR(:col3,',',1,8)-INSTR(:col3,',',1,7)-1 ))"
,Col8   position(1:61)   "Substr(:Col8, INSTR(:col8,',',-1)+1)"
SQL> select * from test
2 /
COL1       COL2       COL3       COL4       COL5       COL6       COL7
COL8       COL9       COL10
Col1x                 Col3x                 col8x
col10x
Shailender Mehta

Data Loading using SQL* Loader giving errors..

While loading the data using SQL* Loader, I came across the following errors:
- SQL*Loader-00604 Error occurred on an attempt to commit
- ORA-01041 internal error. hostdef extension doesn't exist
My Control and Data files have proper Carriage Returns i.e. the last line of both the files is blank.
So, if somebody know about this, plz help me.
Thanx

ORA-00604 error occurred at recursive SQL level string
Cause: An error occurred while processing a recursive SQL statement (a statement applying to internal dictionary tables).
Action: If the situation described in the next error on the stack can be corrected, do so; otherwise contact Oracle Support Services
This kind of error occurs when data dictionary is
query a lot.
Joel P�rez

Master Data loading using Ascential Data stage

Hi ,
We are loading master data using Ascential datastage.
I have created the infoobject ZMATNUM and when I am trying to create datasiurce using 3rd party source sytesm, I am getting then messsage
"DataSource ZMATNUM1(ASCENTLBI): Object type RSDS not supported in BAPI source system".
Please suggest anything how to make the infoobject ready in BW system ready to get loaded from datastage.
Regards.
Snigdha

Hi,
Check the source system connectivity and try to create the datasouce.
Regards,
Venkat

Data load using ODI 11.1.1.5 to hyperion.

Hi All,
I have installed ODI and we have already installed Hyperion.
After installation of ODI , I have created Master repository and Work repository.
Now i am planning to load data to hyperion planning applications dimensions(Eg. Entity).
1) In Topology section, i did right click on Hyperion planning and clicked on "New Data Server". Filled the required infomartion and saved it.
2) Then i right clicked on newly created Data server and opted "New physical schema", but after that it is not showing any application in Application(Catalog) and Application (Work Catalog) drop downs.
Before those steps we had created planing applications in Hyperion.
Please let me know what is wrong/missing in above steps or share the steps to load the data in hyperion.
-PM

Yes , i have entered the values in text boxes/drop downs . Afterward i tried to save it but it ask to fill "context".Then i seletected Context option, In that i have only one option global, I opted that.
And in second field logical schema , doesnt have any value. System doesnt allow to save without giving these values.
Can you please me further steps.
-PM

Automate the data load process using task scheduler

Hi,
I am doing Automated Process to load the data in Hyperion Planning application with the help of Task Scheduler.
I have created Data_Load.bat file but rest of the process i am unable complete.
So could you help me , how to automate the data load process using Data_load.bat file & task Scheduler.
Thanks

Thanks for your help.
I have done data loading using Data_load.batch file . the .bat file call to .msh file using this i have followed your steps & automatic data lload is possible.
If you need this then please let me know.
Thanks again.
Edited by: 949936 on Oct 26, 2012 5:46 AM

Data Load using 0HR_PT_1 & 0HR_PT_2

Similar Messages

Maybe you are looking for