Master Data loading using Ascential Data stage

Hi ,
We are loading master data using Ascential datastage.
I have created the infoobject ZMATNUM and when I am trying to create datasiurce using 3rd party source sytesm, I am getting then messsage
"DataSource ZMATNUM1(ASCENTLBI): Object type RSDS not supported in BAPI source system".
Please suggest anything how to make the infoobject ready in BW system ready to get loaded from datastage.
Regards.
Snigdha

Hi,
Check the source system connectivity and try to create the datasouce.
Regards,
Venkat

Similar Messages

Deleting master data after loading transactional data using flat file

Dear All,
I have loaded transaction data into an infocube using a flat file . While loading DTP i have checked the option "load transactional data with out master data exists" . So transactional data is loaded even if no master data is there in BW.
While loading the flat file, I made a mistake for DIVISION Characteristic where original master data value is '04000' , but i loaded the transactional data with value '4000' .Then i later realized after seeing the data from the infocube and deleted the request. then i reloaded data with value '04000'. Till now every thing is fine.
But when I see the master data for DIVISION , i can see a new entry with value '4000'.
My question is how to delete the entry value '4000' from DIVISION. I tried deleting manually this entry from 'maintaining masterdata' , but it is not allowing me to do so .
I have also checked if any transactional data exists for that value '4000' , as i said earlier I have deleted the transactional data with that values. even tried to delete the entries from the master data table, but i donot see a option to delete entries there.
Please suggest me on this.
Regards,
Veera

Hi,
Goto RSA1 right click on the Info object and select Delete Master data. This will delete the master data unused existing in the table.
If this master data is not used any where else just delete the master data completely with SID option.
If even this doesnt work you can delete the complete table entire in SE14. But this will wipe out the entire table. Be sure if you wanna do this.
Hope this helps
Akhan.

How to load master data from 2 source system without using 0logsys as compo

Hi Gurus,
I am working on a project which has 2 source systems.
Now I have to load master data from 2 source systems without making 0LOGSYS as compunding attribute. Because all the objects which i want to use compunding attribute are reference objects for lot of other info objects. So, i dont want to change the business content objects structure.
So, please help me out providing logic.
thanks in advance
Peter.

Hi Peter,
Can you brief me how did you resolved your issue?
Regards
Utpal

Hierarchy using a flat file for a master data load.

Can anyone please tell me the steps involved in creating a hierarchy in BI 7.0. and loading the data using a flat file into the created hierarchy? I have seen some posts and weblogs but they were not helpful and i have been getting some errors which i dont know how to resolve.
Can someone please give a clear steps and procedure for this?
Thanks a lot in advance.
Naveen

Hi,
The flat file is generated in application server by executing an ABAP program in SE38.
This ABAP program contains the logic to generate hierarchy.
In our case we used a DSO to store employee & supervisors.
This program generated a flat file in tmp folder in application server
In our case, To load this flat file we created an Infosource on our master data using direct update using RSA1old Tcode
after Infosource is created right click on the InfoSource and click on Assign DataSource.
Give the Source System name
When you open this Info source you can select data source as YHIEROBJ_HIER and then activate the InfoSource.
create an Info Package to load the Hierarchy. Right click on the PC Files (Source System) and click on u201CCreate InfoPackage".
Under Extraction tab give the flat file name which is generated by the ABAP program in AL11.
Select the hierarchy which you want to load. Also, you can rename the Hierarchy after loading it. The update method is selected as u201CFull Updateu201D.
Logic for Generation of flat file & ABAP Program:
Flat file structure:
Node ID     InfoObject     NodeName     Parent ID     Date To      Date From     Language
u2022     u201CNode IDu201D indicates the unique number which defines the Node.
u2022     u201CInfoObject u201Cgives the name of the InfoObject which is assigned to this Node ID.
u2022     u201CNodeNameu201D is the name you specify to that Node.
u2022     u201CParent IDu201D is the Node ID to which the Current Node ID reports to.
u2022     u201CDate Tou201D and u201CDate Fromu201D are taken for time references (You can set them constant).
u2022      u201CLanguageu201C is set to English (E).
The program Logic can be :
Declare the hierarchy structure
Get the data from DSO into internal table
Read all the EMP values into NodeName Field of the table
Build lookup table for Parent Node ID
Fill Parent Node ID field
Append this data to work area & then to another internal table
You need to declare the selection parameter as SSFILE1
& use following code to write back the file
OPEN DATASET SSFILE1 FOR OUTPUT IN TEXT MODE ENCODING DEFAULT
     MESSAGE MSG.
IF SY-SUBRC NE 0.
    MESSAGE E008(ZBW1) WITH MSG.
ENDIF
Populate the output from that internal table into final work area.
Transfer this final work area to the ssfile1 which is the desired output file.
and   CLOSE DATASET SSFILE1.
When this program is executed, selection screen asks for the name of file
Enter the desired file name & execute
flat file would be generated in the Application server now.
To view the File, Go to Transaction AL11. Search the directory /tmp. Double click on this directory.
This opens the list of flat files under this directory. Double click on the file name.
Hope this helps.
Thanks,
Rashmi.

Master data loads Request not updated to any data target using delta

When checking the PSA the request updated ICON has red triangle and the mouse over says
"Request not updated to any data target using delta".
I am doing full loads for text data and both full and delta's loads for Attributes. This is BI 7.0 system but the loads are still from 3.1. DTP has not been implemented yet. The system was just upgraded in July. I am unable to schedule deletes from the PSA for successful loads. However, I think the data is updating to the info objects. My Info package has the selection to PSA then in the InfoObject package by package.
How do I schedule the deletes from PSA and why does the Request updated show red but the monitor for the info package show green?
Edited by: Joe Mallorey on Jan 27, 2009 5:46 PM

Hi shikha,
The load has not failed but I am unable to delete the load from the PSA.
If you do a manage on the Data Source or go to PSA from RSA1 the first column has the green gear icon instead of a green check mark I have red triangle the mouse over says "request not updated to any data target using delta" The data has loaded to info object. I am trying to schedule deletes from the PSA and using the option to "delete only successfully booked/updated requests" So how do I get the request updated column to show a green check mark so my deletes will Process? This is for master data only. My transactions load fine and delete properly according to my settings.
Thanks for the reply.
Regards,
JoeM

Loading time-dependent master data using update rules/transformations

Hi
I am trying to load time-dependent master data to an infoobject. It seems that I get an error message on duplicate records if I use a transformation or update rule. Does this only work with direct update ?

In the DTP you have the option to ignore duplicate records....
Just select that and then load data...

Master data Load for Substance Creation : Using BAPI in LSMW ?

Hi ,
Had any one did a Master data load for creating a Substance in SAP RM. If so please let me know the best possible option. I am beeing trying to figure out the option to load Substances and its IDENTIFIER / MATERIAL ASSINGMNET from my legacy system. But I am not geeting a clue to use LSMW. ( Direct or BatchInput )
I am not seeing any BAPI for uploading it through the LSMW except the one BUS1077 ( method SAVEREPMUL ) and I guess this is used along with IDOC.
Appreciate your help and suggestion.
David

Thanks John.
I will try this option what you have suggested. Even I told by business team to look for CG33. But they were been telling me some format issue. Probably they would meant the same what you have said. But they were not aware of work around for this. your information is intresting.
The other option given to me was to create a recording for each and every Tab like Substance header / Identifier / Material assignment etc. seperately. Technically I don't feel good to create in that way. Do you think that is alernate approach.?
With Respect & Regards
David

Initial full load of Master data using process chain

Hi All,
Could you please help me regarding, initial master data load to characteristics with attributes and text. I need to load master data to 23 info objects, by using process chain can I do full load of master data to all info objects at a time. And one more doubt is, as per my knowledge we can't maintain more than one variant in an info package, is that right ? or we can ?
Means Start Variant -> Info Package (0Customer_Text, 0Customer_Attr,0BILL_TYPE_TEXT, BILL_CAT_TEXT) -> DTP ( ", ", ", ") -> ACR.
Your Help will be appreciated.
Thanks & Regards
Sunil

Hi,
"I need to load master data to 23 info objects, by using process chain can I do full load of master data to all info objects at a time."
if there is no dependency between attributes then you add you can create process chains and trigger them at a time. No issues.
we can't maintain more than one variant in an info package, is that right ? or we can ?
With one info pack you can't load data to all 23 psa. because each data source have own psa. you need to sue 23 info packs.
in general start variant--> info pack --> dtp (assuming as your bw 7.x)---> attribute change run.
like that you need to create 23 chains
Or create one two big chains.
one is for attribute and another for text.
In attribute
start varaint--> info pack(info bject 1)--DTP(infoobject 1))--> info pack(infoo bject 2)-->dtp(infoobject 2).
Like that way you can create in series and parallel chains to load attributes data into info objects. at end you add change run for 6 info objects each. SAme you can do for text loads also.
Thanks

Loading Master data using DTP's

Hi,
I have got a problem with loading master data,we use DTP's for loading it,but the requests were failing due to prior incorrect requests for that master data infoobject,inspite of the fact that Master data always overwrites and also the DTP's were full update enabled.
To load successfully we need to go and delete the previous requests all the time.
I think there must be some way of solving this problem,help from you all will be really appreciated.
Regards,
G.Monica Roja Flora.

yeah you would need to delete the incorrect requests before you can load again. Though the master data is overwrite, with the incorrect request the status can never be A.

Steps for master data loading by using process chain

Hi
I want to load the Master data by using the process chain . Can anyone tell me the step-by-step method for loading the master data .
I means what are the processes should i need to include in the process chain . Pls tell me in sequenece .
i ll assing the points
kumar

Hi,
The process os loading master data is similar to transaction data in terms of using the infopackages.
First you have to load Attr followed by texts and hierarchy.For master data you have to include the process type called as Attribute change run.This can be included as a separate process type or using the AND process.
Hope this helps.
Assign points if useful.
Regards,
Venkat

Regarding Master Data Loading by using Process Chain

hai
can anyone tell me 'step-by-step process and what are processes , process types' are used for loading the Master Data , Transaction into ODS and into Infocube.
i ll assing maximum points
bye
rizwan

HI Mohammand,
1. Master Data loading:
http://help.sap.com/saphelp_nw04/helpdata/en/3d/320e3d89195c59e10000000a114084/content.htm
2. Transactional data to ODS:
http://help.sap.com/saphelp_nw04/helpdata/en/ce/dc87c1d711f846b34e0e42ede5ebb7/content.htm
3. Transactional data to CUBE:
http://help.sap.com/saphelp_nw04/helpdata/en/d5/e80d3dbd82f72ce10000000a114084/content.htm
Hope it Helps
Srini

Master data loading by using process chain

hi
I want to load the master data by using the process chain in BI7.0 . How can i do this one .
Can anyone tell me the step-by-step method for loading the master data.
kumar

Hi Kumar,
check this link to load the master data by using the process chain
Re: Process Chain : Master Data
cheers
Sunil

Load Master Data InfoObject using Query as Datasource

I there a way to use a BW Query as a Datasource to load a Master Data InfoObject. I have a query that calculates DSO for a customer and would like to update a custom DSO attribute in 0Customer

As Bhanu mentions, Analysis Process Designer would be an option. I did not use it before 3.5, but I know it did not have all the capabilities it has with 3.5.
I don't think there is any need for transactional ODSs in the process however. You can specify your query as the DataSource, specify any filtering / transformations needed, and then specify the InfoObject that is the data target. I haven't used a query to create Master Data with it but I do use it to take Master Data as input, manipulate it, and then update that Master Data.
The APD is covered in BW380 along with Data Mining - which is a good class if anyone is interested.
Is it easy enough for someone to pickup without training on it? I don't know - I think it would be for someone that has experience with the BW Admin Wkbench and has time to experiment. I think the related Data Mining features would require training.
APD has a lot of powerful capabilities that could be used to solve a variety of challenges not readily solved with the Admin Wkbench tools. I'm not sure why SAP hasn't done more to promote it.

Load master data using input schedules

Hi all,
Does there exist a way to load and modify master data using input schedules?
Regards,
Nithya

Hi Nithyapriya,
Chiming in here to 2nd Joost's statement above. As of BPC 5.1 version, it is not possible to update master data from an Input schedule.
Whether that's possible in other products or with BPC 7.0 NW (currently in Ramp-up), is another story. For now, the general answer is that it's not possible.
This is a known area for improvement with BPC at this time, and we're sure to hear more about either integration with NetWeaver or some other methods of making things more dynamic, or with SSIS packages, etc.. in the future.
Edited by: garrett tedeman on Sep 2, 2008 7:20 PM

Loading customer master data using lsmw and bdc

Hi all..
Iam a beginner in sap world and my first project is to load the customer master data from mainframes into sap.
Can anyone guide me how to approach to this project and what are the best materials to go through. Also can any one send some sample programs related to these..
It would be a great help of you guys for a beginner like me..
Thanks,
mahi

Message type DEBMAS
Idoc type DEBMAS** where ** is highest number available in your system (check via WE30). e.g. DEBMAS06

Master Data loading using Ascential Data stage

Similar Messages

Maybe you are looking for