Data loss!!! HELP!!!!!!!!!!!!!!!!!

I think i might have lost all my photos!!! how can this be possible!!! All i did was rename the roll names in the pictures-iphoto folder...please i need urgent help!!! All my pictures are there!
Can you i do something?

marianabustillos
Welcome to the Apple Discussions.
1.If all your pictures are there, then by definition, you have not suffered any loss of data.
2. What you have done is break the cardinal rule of iPhoto: It is strongly advised that you do not move, change or in anyway alter things in the iPhoto Library Folder as this can cause the application to fail and even lead to data loss.
3. Your choices now are simple:
Return things to the way they were or create and populate a new library:
To create and populate a new library:
Note this will give you a working library with the same film rolls and pictures as before, however, you will lose your albums, keywords, books, calendars etc.
Move the iPhoto Library Folder to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library Folder on your desktop and find the Originals folder. From the Originals folder drag the individual rolls to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library Folder on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
Some notes: You can rename Roll Folder but you MUST do it via the iPhoto Window. Select the Roll, then use the info pane (click on the 'i' lower left) the name and date fields are editable.
If you're trying to find pics: There are three ways (at least) to get files from the iPhoto Window.
1. Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. Show File: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
Regards
TD

Similar Messages

Script that will help validate if there is any data loss after a DB restore

Hi,
I need to write a single script that will perform the following
operations:
1)return me the highy accessed tables across all databases.
2)List the count, Min and Max system date of the highy accessed tables returned from step 1.
The idea is to validate if there is any data loss to the highly transactional tables after a database restore operation has been performed.
Thanks.

Hello,
I would also like you to see nice blog by Aron,you can modify the script a bit to change according to your need
http://sqlblog.com/blogs/aaron_bertrand/archive/2008/05/06/when-was-my-database-table-last-accessed.aspx
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers
Hello Shanky,
The post would not be helpful too much for OP's requirement. The post was talking about when was the database last accessed. DMLs are not capturing in the script and also there will be many variant forms that can be applied for DML. Hence, I do not think,
the script would help too much.
Or Am I missing something?
Latheesh as i mentioed OP has to modify the script little bit may be add User_seek,user_update,user_scans.Still IMO there is no *perfect* way to actually analyze this.So I pointed out point in my original post.Also unless he has some timestamp he cannot
see min time when it was accessed ,max time can be taken from last user seek,scan,lookup time. Motive was to lethim know what he was trying to achieve cannot be axactly obtained by using sys.dm_index_usage_stats.Below query will give most accessed table
: Source (Query)
SELECT
t.name AS 'Table',
SUM(i.user_seeks + i.user_scans + i.user_lookups)
AS 'Total accesses',
SUM(i.user_seeks) AS 'Seeks',
SUM(i.user_scans) AS 'Scans',
SUM(i.user_lookups) AS 'Lookups'
FROM
sys.dm_db_index_usage_stats i RIGHT OUTER JOIN
sys.tables t ON (t.object_id = i.object_id)
GROUP BY
i.object_id,
t.name
ORDER BY [Total accesses] DESC
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

[DATA LOSS] I closed the Tab Groups and all my tabs dissapeared. How can I recover the tabs in Firefox 26? Would you please just delete this feature?

Thank-you in advance for reading all of this.
A slip of the mouse in trying to return to the left-most tab caused the tab groups feature to take over the window. I completely failed to comprehend what I was looking at and closed the thing by clicking the x because I damn sure didn't want what I was looking at. Undo close group? Of course not, I didn't want a group in the first place. Hey! My tabs are completely gone now! So in just a few steps all of which seemed innocent, I have lost all but ten of the tabs that were open, and those were only the most recent ten (and actually older tabs would have been more valueable than newer so insult on top of injury).
I don't think increasing the number of undoable tab closures is the answer. I think getting rid of the tab groups feature all together is the best way to go. I seem to have lost all the tabs I had open, irretrievably, and some of them had been open for WEEKS so they can't be reopened from history.
The tab groups feature is a data loss bug. Please remove it from the UX completely. If you have to figure out a way to grandfather people who actually have a tab group, fine but don't further vex me with it, please.
The reason this catastrophe has occurred is that your feature, was so discoverable that I activated it by mistake, and the UI after that had to be learned on the spot, yet was too complicated to learn. You really should withdraw it until you can figure out how to keep the UI for it from causing data loss such as I have experienced this morning.
Also, there may be other questions on this feature which are from a certain point of view the same as this one. It's hard for me to tell for sure. None of them had a true resolution so that's why I posted this one, also I'm seeking a specific fix, removal of the offending feature.
Why remove the feature? Because if I allow in my discussion the possibility of retaining it, it will stick around in its present and dangerous form until your team is done bikeshedding the new form it should take. Instead I want you to delete the feature and then require its champion to convince you that a new incarnation won't cause data loss before you allow it back in.
Fellow users, if you know of a way to recover all 50 lost tabs from an "undo close tab group incident", I would be grateful for that advice, but I would still believe the feature should be deleted. Some of the tabs have been retained for months so digging them out of the history is not practical.

I am not 100% certain but I am fairly sure development of this tab feature has ceased and it is likely to be deprecated. I am even less sure what the replacement will be.
Thus forum is not the place for discussing development issues or feature requests. (Developers do not use this site)
*You could comment using feedback <br /> https://input.mozilla.org/en-US/feedback
*Or try to find a developers forum or mailing list <br /> http://www.mozilla.org/about/forums/#general-development
I have not tried this and am not even using Windows at present but the tabs groups are stored as entries in the sessionstore.js files. Firefox has such a file plus sometimes numbered copies and a backup copy. Firefox will have re-writen these files but I suppose there is a posibility the Windows OS may have kept copies.
* see http://windows.microsoft.com/en-US/windows7/Previous-versions-of-files-frequently-asked-questions
* http://kb.mozillazine.org/Sessionstore.js Note the files are kept within the Firefox Profile
** Firefox Button -> Help -> Troubleshooting [open profile] (or some thing similar) is one method of locating the profile.
Find and backup any current sessionstore.js file. Consider also bookmark or otherwise recording anything you have open. Now find any previous versions and try putting them in Firefox's profile before restarting it.

My ipod touch is in DFU mode 5g I need help, do not want to lose my data, please help in Spanish

I need help, do not want to lose my data, PLEASE HELP IN SPANISH

Una vez que el dispositivo está pidiendo ser restaurado con iTunes ... ya es demasiado tarde para salvar nada ... y usted debe continuar con la recuperación de ...
Vea aquí> http://support.apple.com/kb/HT1808
Es posible que tenga que probar más de una vez ... Asegúrese de seguir todos los pasos ...
Tómese su tiempo ... Preste especial atención a los pasos 3 y 4.
Para minimizar la pérdida ...
Después de haber recuperado su dispositivo ...
Re-sincronizar su contenido o restauración de la última copia de seguridad ...
Restaurar desde copia de seguridad> http://support.apple.com/kb/ht1766
Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
To minimise loss...
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

Data loss Lacie 500GB external drive_ disk utility changed partition!

Details of problem. I have a 500GB Lacie mini hub HDD which is used with an iMac angle poise. Recently it has been playing up- unable to access folders/files etc. and since I know the PSU fails on these items (capacitors fail -5V and 12V go haywire- already fixed another one - I have a 320GB with a mac mini setup) I removed unit from the imac and connected in place of the 320GB lacie on the mac mini, using the known good PSU. The iMac is running latest 10.4 and mac mini is running latest snow leopard 10.6.1
The Lacie spun up and mounted OK and I was able to access all files folders with no issue, so since I was keen to make sure it was 'fixed' I ran disk utility. It ran and said it verified and then I realised I hadn't run repair so re-did this. Big mistake!
It did the same run and said no problems found, but it then said something like updating partition! Horrified I waited and it seemed to finish or had finished straight away. Not sure. I looked at folders and yes main 2 items in place, but nothing showing below this. ****. It got worse. I ejected and tried to reconnect and low and behold it says drive needs formatting now. Disk utility even shows this 500GB as having 2.2TB of space, which I see in other posts is another issue.
I have important data backed up elsewhere, but there are a large number of files I do not have copies of and suspect there is a way to recover these. I have since seen all the 'data loss' guest account issues and wonder if this is yet another bug in snow leopard.
Have tried running Techtool Pro 5.0.6 to see if it can see the data but its not seeing anything. Will try Diskwarrior and others, but may well shelve to see if apple gets an os update released for data loss issues.
Any thoughts on how to recover? Anyone with a similar issue? I am pretty certain this is not a failed hard drive as it sounds 100% normal. Thanks for any help or guidance.

Thanks for all the comments recieved. V.K. made me re-evaluate what I had proved or not. I was fairly certain (not 100%) that the drive mech was OK, because the psu had failed, but should have proved drive mech was actually OK. So I removed the mech (as USB abd firewire can't do SMART etc.) and hooked up to an old G4 Powermac. I then found that the SMART verified, but had forgotten the 128GB limitation on older macs. So removed and got a PC to hook it up and run latest IBM_Hitachi drive fitness and other diags. (its a Deskstar HD and I have had almost zero issue with these drives over the years.) It checks out fine, so I was correct in my initial thoughts, only the PSU was faulty.
So back to my initial suspicions that Snow Leopard or disk utility has screwed things up, maybe a bug, maybe not. And I did run verify first and it said it was OK, only when I re-ran the repair did it then do a "partition update" (or whatever it said - should have done a screen capture - searched apple but can't find listing of all mesgs avail. must be in developers site I expect). So I am back at looking at how to recover, if at all possible, but as Alsoft have said this is not something Diskwarrior can do directly. Files must still be there just partiton map is now in a ... needs to be initialised mode. Not that I will do that.
So I guess summary is possible bug/funny in 10.6 and/or disk utility.
sounds like I will be contacting Alsoft now
may read up on partition map damage first, so I get a better picture of whats involved.
Cheers and thanks for all the help/ideas.
BTW - been using macs_pcs for decades now and helping friends & family fix things as and when. This is first time needed to post on forum as always found answers to questions I had previously. Must remember the old adage of not jumping onto new technology until it has bedded down I bet if I had hooked up to the old G4 Powermac I wouldn't be in this position. Thanks again.

What can I do simply to keep all my previous contents, (own pics, videos, etc.) on my previously authorized iPad on PC, but get a new authorisation and a right syncronization, without data loss with a new iTunes on my new Mac?

Friends,
I already had an iPad(1) and its full contents (not only the purchased items, applications from Apple, but my all own pics, videos, songs etc.) is normally syncronized with an authorized PC (Windows) computer.
Now, I've bought a new MacBook Air computer, and want to sell my PC. But I don't know how to transfer (or syncronize) all of the contents from my previous iTunes on PC to the new one on the Mac.
When I connected my iPad to my new MacBook Air, I promted, if I want to change authorization of my iPad to the MacBook.
But also got a warning, that the new iTunes will delete from my iPad all my previously syncronized items, pics, videos and music, with the previously authorized iTunes on the previous computer, expect the saved pics from the net.
What can I do just like that, simply to keep all my previous contents on my iPad, but have a new authorisation and a right syncronization, without data loss with the new iTunes on my new Mac?
Thanks a lot for your answer.
([email protected])

Here are some instructions that I have posted several times that may be helpful to you as they have been to others. You can simply ignore anything that does not apply or that you have already done.
As Alan stated above - transferring the iTunes library is the best first step. If you can transfer the iTunes library to the Mac, most of this will be unecessary for you to do.
Very Important ....
1. Authorize the computer.
2. Turn off auto sync in iTunes
3. Transfer purchases
The text in italics is from the other thread - non italics are my words.
The following was copied from this thread. This is essentially what you want to accomplish.
https://discussions.apple.com/message/11527071#11527071
1) Without connecting your iPad to your new computer, start iTunes. Click on iTunes. Click on Preferences. Click on Devices. Check the box next to "Prevent your iPod etc. from automatically syncing." Click OK.
2) Now connect your iPad to your computer and start iTunes.
3) When iTunes starts, right click on your iPad under Devices in the left column. Select Transfer purchases etc.
4) After it finishes transferring all your apps to your computer, right click on your iPad and select Backup your iPad.
5) After it finishes backing up your iPad, right click on your iPad and select Restore etc.
6) After it finishes restoring, left click on your iPad , then click on the Apps tab on top, and check the box next to Sync Apps, then click on Apply below.
If everything on your iPad looks good after the sync, go back and click on iTunes / Preferences / Devices and UN-check the box next to Prevent your iPod etc. The only other thing you may want to check is if your contacts, bookmarks, etc. are syncing correctly now. If not, go to the Info tab after connecting and make sure you indicate which features you want to sync with what sources.
Read this thread and the support links as well. There are apps that you can purchase that will allow you to transfer photos from the iPad to your computer. Look at Photo Transfer App in the App store and you can search for others as well.
https://discussions.apple.com/message/13016026#13016026
This support site will help you with transferring iTunes music to your new computer.
http://support.apple.com/kb/HT4527
One final note - you may want to leave auto sync turned off - but that is totally up to you. I never did use auto sync.

Data loss in the secure file transfer using java

Hi,
My java Appllication uses the sftp(secure file transfer protocol) for file transferring. when the load is high like 150 GB , data loss occuring for some files especially last chunk of data is missing.
Core file transfer code
while (true)
int read = bis.read(buffer); //Reading bytes into the byte array (buffer) from network stream (bis).
if (read==-1) {
break; //Break the loop, if there are no more bytes available in the InputStream.
bos.write(buffer,0,read); //Writing the same number of bytes what we read into buffer byte array into OutputStream
complete.update(buffer,0,read); //Giving the same number of bytes what we read above to the checksum calculation.
bytesSoFar += read; //Incrementing the bytes that we have read from the source.
//if the bytes transferred are equal to the source file size
If (bytesSoFar == fileInfo.getFileSize().intValue())
// Calculate the file checksum.
// Update DbAuditLog with checksum and no. of bytes read
else
// Update DbAuditLog with no. of bytes read
bos.flush();
Please help , why the data loss is happening when the big size files transfer
Note:
1.150 gb not a single file multiple files.
2.SFTP no java specific API, So connection is happening through java .io.sockect connection

so, if you are not getting any exceptions, yet the data is incorrect, it sounds like you are having actual network issues. i'd start looking at things like the actual network cards in the computer as well other equipment involved in the transfer. since you are not getting exceptions, the network stack obviously thinks nothing was lost over the wire, so either the actual hardware has issues, or the network stack, or the issue is on the sending end. the last possibility is that the client is somehow munging the data it is sending. do you control the client code? if so, i'd start checking the client side code for bugs (and/or post it here).
also, i'm assuming that all of the variables included in your original code are thread local (you aren't sharing any of those buffers/streams/etc between multiple threads).

When is the Next update of IOS..? ****** of with Data Loss issue

I am using Iphone 4 for past 2 years in India on Dococmo Network, since after the update of IOS 5 and 5.0.1 I
am FAcing the frequent Data loss in Mobile...!!
Time beign i can over come it by turing off the cellular connetion to on and off mode where it resetting the data connection...!!!

Since you haven't bothered to describe what this mysterious "data connection issue" is, we have no way to confirm or deny your statement that the problem is widespread.
The fact remains, you're using it on an unsupported carrier.
If you'd like to try and describe WHAT THE PROBLEM IS instead of getting defensive about it, we might be able to help. Otherwise, your initial question has been answered. No one here can tell you when the next update to iOS will be released.

When export mode is full and userid is system, data loss happens.

Hi!
I'm running Oracle 7.3.4 On HP-UX. I have problem when I try to export full my DB.
I make a php program(a kind of ticket management program) and it use WEBDB's data in Oracle.
Now, I export my WEBDB's data through userid="WEBDB" and the result of log is
Connected to: Oracle7 Server Release 7.3.4.3.0 - Production
With the distributed and parallel query options
PL/SQL Release 2.3.4.3.0 - Production
Export done in KO16KSC5601 character set
. about to export WEBDB's tables via Conventional Path ...
. . exporting table IMSI
EXP-00008: ORACLE error 8103 encountered
ORA-08103: object no longer exists
. . exporting table TEMP 334 rows exported
I export full my DB through user="SYSTEM" and the result of log is
. about to export WEBDB's tables via Conventional Path ...
. . exporting table IMSI
EXP-00008: ORACLE error 604 encountered
ORA-00604: error occurred at recursive SQL level 1
ORA-08103: object no longer exists
. . exporting table TEMP 331 rows exported
The num of TEMP's row is 334 rows. I created "IMSI" table 2~3 days ago.
What a terrible row & table loss!
Please, what do I do? I need to do export full and no data loss...

If its anything like exporting in Rel 2, you will have to export using SYS, not another user.
Hope that helps ;)

Safest Way to Penetration Test an Oracle DB with Potential Data Loss

Hi,
I was wondering what the safest way to protect Oracle from data loss when running a web application scan. We currently have an external company about to perform a web application scan and they warned us of potential data loss. However, we can't afford much downtime and our storage doesn't support things such as Copy on Write. What would you recommend? Do you think that something like putting the database in read-only mode for the duration of the test (2 hours) and enabling audit on all actions would be sufficient (we could then review the audit to see if any unauthorized calls were made)? Thanks.

If not running live you might consider restoring your database to before the test. But you need to have confidence this would work.
I assume your running live for the duration of the test.
Going read only might invalid the test, and your application might not be able to run read only without generating errors.
Examine and be aware of the flashback technologies available to you at your database version and which ones might be useful. In this context increase undo space/retention target might be helpful but dont dash off doing something at last minute.
Ensure you have checked out how to use logminer.
Consider not continously updating and standby database you have until test is complete.
Ensure your more recent backup is successful and you have checked your restore procedures and have contingency places in place.
In practice the web peneration test may attempt to change a small amount of data in a small number of records, but the agreement probably means they are not liabable if they dropped schema in the database!
If you have to correct data following their test then do so carefully. Doing the wrong thing (especially in a panic) can make a sitation worse, especially if you are doing something you are not familiar with. Often it may be better the data loss through the application itself.
If you do turn on auditing be aware of what it gives you before you turn in on, and beware any space implications.
I notice your are recently registered on the site ... this may mean you dont have much experience with oracle, you may be more of a system administrator for instance. No disrespect in that whatsoever. However especially if this is the case then remember in my opinion dashing to change something last minute statisically often does more harm than good overall and may be harder to undo.
Hope this helps.
bigdelboy
Edited by: bigdelboy on 28-Mar-2009 01:18
Edited by: bigdelboy on 28-Mar-2009 01:22

Data loss -- managed photos mis-badged as missing referenced photos

I always import all photos as managed photos, and never use referenced photos. Yesterday, I noticed that the last 29 photos from a group of 96 photos imported Feb 18 were badged as "The referenced image’s master file has not been found."
Indeed, although I had worked on many of these images in Aperture shortly after importing them, I could now only view a large but low-res thumbnail.
Weirdly, when I right-click on one of these images and select "Manage Referenced Files..." I get a message that "The selection doesn't use any referenced files." I get the same message when I select "Manage Referenced Files..." from the File menu with the entire project selected.
Using the Finder, as well as the find and locate commands in the terminal, I have verified that the missing images are not on my main or backup hard drives (unfortunately, I use a simple rsync script for backup, and I didn't discover this problem until after the deletions had propagated to my backup).
The other 67 photos imported at the same time (same import group) seem fine, and, using the Finder, I can locate all of them in the Aperture library.
To test one user error scenario, I imported some test photos into the Aperture library and then relocated the masters to the desktop. I then quit Aperture, deleted the photos on the desktop, and relaunched Aperture. As expected, the test photos had the same "The referenced image’s master file has not been found" badge, but when I right clicked and selected "Manage Referenced Files..." I got the expected dialog, unlike when I select the same option for the missing 29 photos.
Any ideas what went wrong?
G5 iMac Mac OS X (10.4.8)

Thanks for responding...
It sounds pretty odd. First try to rebuild the
database...as was suggested (Option>CMD on launch of
Aperture).
I will try this eventually. But I want to get some insight first, in case this could create more problems than it solves. I am also holding off on updating to 10.4.9 for the same reason.
This might help. If not, try to make an
adjustment on one of the images. This will force the
thumbnail to redraw. If the adjustments aren't
available for that particular image, then the image
is really offline somewhere.
I am unable to make any adjustments on these images.
I assume you went into your Library "Show Package
Contents" to confirm they are missing. If not, try
that.
Yes, the images are not in the folder with the other images from that import. Further, I used the unix 'find' and 'locate' commands to search my entire hard drive and backup drive, and the images were not found.
Can you Export the image?
That was how I first stumbled on this problem -- I tried to export and got an error message that "Versions with unavailable master images cannot be exported."
The weird thing is that when I try and get the 'Managed referenced files...' dialog, Aperture claims that "The selection doesn't use any referenced files" -- that tells me this data loss might be the result of a bug and not user error.

Can I just close disk utility without risking data loss or drive problems?

I am using disk utility's restore to clone a hard drive to an external drive but it is taking forever (telling me 3 days) and the cancel button won't work. Can I just close disk utility without risking data loss or drive problems? Force quit? Anyone have experience with this?
- George

I spoke with a tech advisor through applecare. Theoretically the source drive should not be damaged if you quit the disk utility application while cloning your drive. More obviously, the destination volume will be unreadable and require a re-format, but in general no major damage will occur. I have quit the disk utility and restrarted, the source drive works as expected, while the desitination shows, "unreadable"
Hope this helps anyone else with a similar question.
- George

Convert Dynamic Disk to Basic Disk Witout Data Loss

I think I goofed somewhere and am in need of some advice.
This Windows 8.1 home server had two identical 160GB drives that at one point were mirrored. One of the drives failed but so I added a larger replacement hard drive (Disk 0 = 160GB, Disk 1 = 250GB) and was able to recover. However now, not only
is the mirror broken, but the configuration is crazy:
Disk 0 contains 1 100MB System Reserved Parttion (System)
Disk 1 contains 1 120GB partition where the OS is installed (Boot, Page File, Crash Dump)
Since its much quicker to move 100MB vs 120GB, I was thinking I'd copy the 'System Reserved' partition on Disk 0 to Disk 1 using a third-party utility, but because both disks are Dynamic Disks, this isn't possible.
So at this point I can only think of two options:
Recreate the 'System Reserved' partition on Disk 1 (Is it as easy as running bootrec /scanos or /rebuildbcd or /fixmbr or /fixboot?) > Wipe Disk 0 > Confirm Windows 8.1 boots > Then create a new mirrored volume on Disk 0
Mirror Partition 1 (120GB) on Disk 1 (where Windows is installed) to the available space (149GB) on Disk 0 > Break the mirror > Wipe Disk 0 > Confirm Windows 8.1 boots (maybe I'll need to run bootrec with some switch here?) > Then create a new
mirrored volume on Disk 1
Thoughts?

See:
How to Convert Dynamic Disk to Basic Disk without Data Loss?
Carey Frisch
Thanks for the reply.
I've seen that post, among others, and they all require buying an application. None of the product pages, like the one you linked indicate that a purchase is required. It wasn't until I downloaded the aplications, (and I've tried several) that
I discovered a purchase was required. Really disappointed they weren't upfront about that on the guides.
So maybe a different approach can be taken:
Disk 1 just contains the System Recovery partition - the rest of the disk is blank (not partitioned)
Create a new partition
Copy the OS data from Disk 2 to Disk 1
Update the System Recovery and/or the Boot Configuration Data file to point to the OS that's now on Disk 1
Once updated, reboot
The system should boot properly from Disk 1 and the OS should also be running from Disk 1
Convert Disk 2 to a basic disk
Once Disk 2 has been converted back to a basic disk, can I just do the opposite?
Create 2 partitions on Disk 2: one for System recovery and another for OS
Copy the System Recovery partition (partition on Disk 1) to partition 1 of Disk 2
Copy the OS partition (partition 2 on Disk 1) to partition 2 of Disk 2
Update the System Recovery and/or the Boot Configuration Data file to point to the OS that's now on Disk 2
Once updated, reboot, the system should boot properly from Disk 2 and the OS should also be running from Disk 2
Convert Disk 1 to a basic disk
This is bonkers, believe me, but I feel silly shelling out $40-$50 for a single feature of an application. If I were going to use it regularly, or even periodically, I would do it.
I'm not very comfortable with bcdedit and bootrec so I need a little help with steps 4 in both sections.

Complete data loss and can't hot sync to user - Zire 72

I had a complete data loss on my Zire 72s due to battery drain. I have the palm desktop back ups on a pc Windows vista and mac os 10. I reset the device and now cannot get it to identify the desktop user account to sync and can't seem to find a way to add the same user name to the handheld.
Any information, steps to help me out would be great so I can get the info back onto my zire.
p.s. I also lost my solitaire game and where I can download this app again would be welcome as well.
Thanks.

I had a complete data loss on my Zire 72s due to battery drain. I have the palm desktop back ups on a pc Windows vista and mac os 10. I reset the device and now cannot get it to identify the desktop user account to sync and can't seem to find a way to add the same user name to the handheld.
Any information, steps to help me out would be great so I can get the info back onto my zire.
p.s. I also lost my solitaire game and where I can download this app again would be welcome as well.
Thanks.

Data loss after routine synch with m515

I just did a hot synch and discovered that almost all of my datebook info has been wiped out from both my handheld & the desktop!! the synch log contains the following message: "-- Date Book
   - Some handheld records were not copied to your PC. Your computer may be full or you may have reached the maximum allowed records on the desktop."
Only about 5% of past calendar entries are still there, and about 10% of current/future entries.
I went to the datebook.bak file but it is the same as the data file inspite of the fact I only synched the one time.
Can someone please tell me there is hope for retrieving my data? Should I just throw the Palm pilot out the window and go back to good old fashioned pen & paper? This is not the first time I have suffered a complete data loss with these things - the last time was when I upgraded to a new palm & in spite of following the directions exactly, everything was lost.
Thanks much, Janette
Post relates to: Palm m515

Thanks a lot for responding, Aeisha. I did the search & found the largest datebook.bak file.   I opened the palm desktop & used the import option. I selected the exact location specified by the search results but the files don't match! For example, the file found by searching is a bak file & its size is 1311 kb, but when I get to the location(thru palm import) in the folder tree where it's supposed to be, the only datebook file there is labeled "unfiled.dba" and is only 640 kb. I tried importing that but didn't get back any lost data.
    Is there another way you were thinking I could "import"? Thank you for your help. Janette
Post relates to: Palm m515

Data loss!!! HELP!!!!!!!!!!!!!!!!!

Similar Messages

Maybe you are looking for