Data lost after activating DSO

Hello,
I have a Problem with Standard DSO. We load data in the standard DSO and in the transformation is an end routine to fill an specific field Bpartner with the Bpartner number from antoher DSO. After the load In the DSO table new data is everything okay (Bpartner filled from the other DSO) but when I'm activating that DSO in the table active data Bpartner is empty. Has anyone a solution/explanation for this problem?
Thanks for your answers.
Best regards,
Sebastian

In the Transformation, set the BPARTNER to a constant value and leave that value. This will then cause the activation to move the BPARTNER that's entered in the End Routne to populate on the Active table during activation.

Similar Messages

Data lost after several days running!

data lost after several days running
ENV:
Service Pack 1 for Crystal Reports for Eclipse 2.0
Tomcat5.5
Problem:
There is no problem to export the report as PDF files in the first few days after i upgraded the CR4E.
But after several days running,the problem appeared : the exported PDF file was incomplete!
It's supposed to 3 pages,but only 1 page(the first page) exported actually.
When i restarted the tomcat,the problem disappeared.In several days running,
the problem appeared again...
Code:
reportClientDoc = new ReportClientDocument();
reportClientDoc.open(Messages.getString("tmpltPath")+tmplt_name, OpenReportOptions._discardSavedData);
RptHelp rptHelp = new RptHelp();
rptHelp.setDatabaseCtrl(reportClientDoc);
rptHelp.addDiscreteParameterValue(reportClientDoc,"","userName","admin");
rptHelp.addDiscreteParameterValue(reportClientDoc,"","start_date",start_date);
rptHelp.addDiscreteParameterValue(reportClientDoc,"","end_date",end_date);
for(int i=0;i<6;i++){
     if(!p_name<i>.equals("")){
          rptHelp.addDiscreteParameterValue(reportClientDoc,"",p_name<i>,p_value<i>);
String exportPath = Messages.getString("reportExportPath");
String exportName = "test";
rptHelp.export(reportClientDoc, exportPath+exportName, file_extention);
File file = new File(exportPathexportName"."+file_extention);
FileInputStream in = new FileInputStream(file);
int len = (int)file.length();
byte[] data = new byte[len];
int read = 0;
while (read <len) {
    read += in.read(data, read, len-read);
in.close();
response.setContentType("application/x-msdownload");
response.setHeader("Content-Disposition", "attachment; filename="+ URLEncoder.encode(exportName"."file_extention,"ISO-8859-1"));
OutputStream ops = response.getOutputStream();
ops.write(data);
ops.flush();
ops.close();
out.clear();
out = pageContext.pushBody();

What is the data? What is displaying the data (graph or chart)? What does your code look like? Why did you post a 4M image to the forum?
NaN in the data will appear as gaps in plots.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Data Inconsistency when activating DSO in BI 7.0

Hi Guys,
We are using BI 7.0, We have an ODS object and 2 IOs in that A & B. When we load data to that DSO it is loaded propery and that 2 IOs data is seen in New Data Table.
The real strange thing when we activate that request that 2 IOs data is not seen ( 2 IOs show empty columns).
Its urgent, happening in Support..
Please help me out...
thanks in advance
Peter

We are using BI 7.0, We have an ODS object and 2 IOs in that A & B. When we load data to that DSO it is loaded propery and that 2 IOs data is seen in New Data Table.
So you have loaded data to the DSO.
The real strange thing when we activate that request that 2 IOs data is not seen ( 2 IOs show empty columns).
After activating the request where you are not able to see the data? at new table ? at active table?
can you check you active table of the DSO.

IPad Data Lost After OS 5 Upgrade

Hello,
I recently upgraded to OS 5 on my iPad. Everything went okay EXCEPT I lost data within apps on my iPad. I contacted the app vendor, and although they had some useful suggestions, I cannot locate the lost data.
When I go to restore from backup, it's the same data as AFTER the upgrade so that doesnt't help me. I use Time Machine on my iMac which I snych with this iPad, but I don't know what file to look for since everything is embedded in iTunes (the backups and files for the iPhone and iPad).
Any suggestions? I know the data has to be there, but I don't know where to look.
Thanks very much.

I am a bit unclear as to what you are saying. iCloud retains the last three backups per device. Are they not available in your case? Please see the attached link in its entirety. If you need more help please give a more detailed account of what has / is happening. http://support.apple.com/kb/HT4859

Sticky Brain data lost after upgrade to 10.4.4

Sticky Brain can't locate my data file after the upgrade to 10.4.4 and neither can I. Can someone tell me where it might be moved to during that process?

I can't tell you where it might have moved to but in my case, using 4.0.3 the default backup file is here- HD/Users/yourname/Library/Application Support/Chronos/Backups

Blue Screen and data lost after rescue n recovery during F11 operation

when I start my T61 Laptop, i get complete blue screen with no addition error window. Pl. suggest solution to this problem.
Moderator edit: problem added to subject line for clarity.
Message Edited by Agotthelf on 21-07-2009 10:40 AM

HI
Thanx for replying . Now the problem of immedietly solved when i booted my laptop with F8 . But the new problem arises. When I logged in, the system starts fine but when I run rescue n recovery option from thinkvantage button , the laptop restarts and then all errors shown. Like "c_1252.nls" file is missing or corrupted. This is the first messege I got while booting. Then I booted with F11 for rescue n recovery. I recovered file c_1252.nls from backup folder on harddrive. But when i restarted again the new c_0437.nls shown missing and this i got so many times after each n every rescue n recovery options. Then I again rescued all the files in system32 folder and restarted my laptop. Which restarts good uptill it asked for domain password . But when i clicked to enter the password the error messege shown " Diskeeper not present" and subsequently "SQL server is disturbed" like that . But the login successful and when the desktop arises the windows intstaller window shows but no further processing even i waited for 15 min. And above all I lost all my data saved in one n only drive that the LENEVO provided with OS. NO partiton. PL. suggest any solution this . Is it possible to recover my data since I didnt make any backup ?

Urgent: contacts and calender , data lost after update

i updated my iphone to ios4 last night , it took alot of time doing the backup of it i went to sleep and in the morning i found it without any data on it , the screen showed a message that the phone was activated . nothing more!!
i conect it to itunes and it asked if its new phone or restore it , i pushed new . then nothing..
any sugestions please help

Do a reset on the phone, what happens after that?
Can you sync? Can you restore from backup?

R12.2.4 Data lost after using Dialog Page and return back to calling page.(Help Please! )

Hi Team,
I am new to OAF and is working on a requirement to add some custom validations when the user clicks on a Button in a standard seeded page.
The approach I took was to Extend the seeded Controller object that handled this button press event and put my custom logic in the extended controller and override the standard controller via personalization.
The standard flow was that upon pressing the Complete Button in Page A ,user was taken to the next seeded page (Page B) to perform certain operations based on the records that were selected in Page A.
Part of the custom validation requirement was that if certain validations were not met then the user needs to be shown a Pop-up asking if they really wanted to proceed and if they selected Yes then continue with the standard seeded flow(move to page B) and if they selected NO then just stay on the current page.
I was able to use OADialogPage and do this partially , the issue I am running into is that once the user selects the one or more records using a check box from a multi-record (table) region and hits the Complete Button on page A and if the validation fails then a modal page is shown and the user makes a selection i.e.either Yes or No from the modal page and when they return to calling page (i.e. Page A) , All the Data (records ) that they selected previously is lost (Page is refreshed). Based on what I see on this forum I suspect that it is because after clicking on Yes on the modal page and while returning to the original page the processRequest fires again and VO data is queried again and all selections on the page A are lost. Since I am trying to alter the flow in seeded pages based on user intervention I am kind of lost as to how this issue can be fixed. i.e. either prevent the page refresh or preserve the selections that were made prior to navigating to the modal page. Any Help is truly appreciated !!
My Code :
public void processFormRequest(OAPageContext oapagecontext, OAWebBean oawebbean)
if (oapagecontext.getParameter("completeOps") != null) {
if (warnCount > 0) {
//OAException message = new OAException("Not in Sequence...", OAException.WARNING);
//oapagecontext.putDialogMessage(message);
OAException message = new OAException("Rule XYZ Violated .Do you want continue ?",OAException.WARNING);
OADialogPage dialogPage = new OADialogPage(OAException.WARNING, message, null, "","");
String yes = oapagecontext.getMessage("AK", "FWK_TBX_T_YES", null);
String no = oapagecontext.getMessage("AK", "FWK_TBX_T_NO", null);
dialogPage.setOkButtonItemName("ConYesButton");
dialogPage.setNoButtonItemName("ConNoButton");
dialogPage.setOkButtonToPost(true);
dialogPage.setNoButtonToPost(true);
dialogPage.setPostToCallingPage(true);
dialogPage.setOkButtonLabel(yes);
dialogPage.setNoButtonLabel(no);
oapagecontext.redirectToDialogPage(dialogPage);
if (oapagecontext.getParameter("ConYesButton") != null)   {
          // Write Action code for Yes Button
          oapagecontext.putParameter("completeOps", "Continue");
if (oapagecontext.getParameter("ConNoButton") != null){
            // Write Action code for No Button
            String errormsg = "Rule Violations have occured ";
            throw new OAException(errormsg);
   super.processFormRequest(oapagecontext, oawebbean);

I was able to work around this issue by adding a simple check in the processRequest method of my extended Controller to prevent the call to super.processRequest incase when the control returns to the page after the user has made a selection in the Dialog Page
if((oapagecontext.getParameter("ConYesButton") == null) && (oapagecontext.getParameter("ConNoButton") == null)) {
super.processRequest(oapagecontext, oawebbean);
Thanks !

A big deal of data lost after software update

Hello,
Hopefully someone will look into this problem. I have seen also here other reports of losing data after software update.
I have a Nokia N73 Music Edition. Before I updated the firmware, I used Nokia PC Suite to backup all data in the phone memory as well as the phone settings. After a successful update, I tried to restore the backup. No error occured during the restoration. However, I found out many things hadn't been brought back to my phone, such as messages, notes, as well as landmarks that I saved in Nokia Maps.
I want to know what is going on and if there is any hope to get back those lost pieces. Thank you!
Best regards,
Wei

Sorry if your husband didn't backup your phone either to iTunes or icloud prior to updating your phone, then those data is gone.

All data lost after upgrading

I lost all data after upgrading my iPhone 3G to iOS4. I was able to recover only the information that syncs with mobileme, everything else was gone, in all apps: bank accounts, passwords, notes, games, settings, etc -everything
I already restored and restarted, even used time machine, nothing seems to work. Any help?

I am trying to update to the newest software, and get a warning that i need to save/transfer new purchases to my library. I know the last time i did this update i went with continue, and as the others in the posting have indicated lost information. It didnt matter to me at that time, but now that I have more info to lose, i dont want to do it, so the other option on it is to do as it asks. But, I am having a hard time doing that. I have done what they have asked by going to file and transferring, but, it doesnt seem to be working. As i continue to get the same warning. I am not going to update this till i get the answer to do it properly this time. But, want to know why it doesnt want to transfer the info that it requires, for me to continue on. I think this is why the others in the thread are losing their info.

My iPod touch 5th generation data lost after downgrade from ios 8 to ios 7.1.2

I have just downgraded my iPod touch 5th generation from ios 8 to ios 7.1.2 . after downgrading, all my data (apps, music, document) in the iPod touch were lost, but photos were manage to recover. when I connect to the computer, it show that others in the capacity column used up almost 18 GB of memory. What is in others? Why it used up so much memory? How can I recover my lost data?

You may not be able to restore the data since when you downgrade from a backup made with a new iOS version data does not transfer.
An "other" larger than about 1 1/2 GB indicates corrupted files.
What is the Other on my iPhone and How to Remove It
What is "Other" and What Can I Do About It?
Next, usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
To restore from backup see:
iOS: How to back up
To restore to factory settings/new iPod see:
iTunes: Restoring iOS software

Data lost after using my external drive as backup drive

Hi
I've make a backup of all my files in my external hard drive, after that I formatted my Mac.
I connected my external hard drive the Mac asked if I want to use it as a backup drive I said Yes, now I cant see my files I've lost all my data.
Any one could help please?

See V.K.'s post in this thread: https://discussions.apple.com/message/11044944?messageID=11044944#11044944?messa geID=11044944

Data lost after reinstalling App

Hi, yesterday I deleted and reinstalled an App (it wasn't running perfectly so the technical support told me to do that), well, after the reinstallation all it's data were lost (magazines, newspapers, etc)
I tried a sync but the publications are still missing...
How can I recover it?
Many thanks in advance.

Ok..
after the reinstallation all it's data were lost (magazines, newspapers, etc)
Since they are the ones who advised you to delete then reinstall the app, then you need to contact them again regarding the magazines and newspapers.
http://quiosco.orbyt.es/

HT4623 Is there ANYWAY to retrieve data lost after updating to iOS 6? Backup failed.

I need to know if Apple can retrieve lost data after restoring mi IPhone 4. Backup failed.

I have it but didnt back up the iPhone 3GS when i updated the iPhone 4G it didnt erase anything off of that so i didnt think it would on the 3GS

ICal data lost after MobileMe to iCloud transfer

Completed the transfer from MobileMe to iCloud and set up all devices..no issues there.
Opened iCal and found that the entries had all been duplicated - after deleting the duplicates (1st mistake) then found that after a sync - all was lost.
Luckily I had backed up before the updates - so imported the data back into iCal - but as soon as it syncs, it reverts back - no imported data remains...
Seems that the iCloud is overwriting the restore iCal on the mac....
Anyone else having this issue, or have any suggestions?
DJ

The issue with the backup I had was that it was an "archived" export so I found that when I tried to import it back into iCal, it would bring the old MobileMe settings with it, which would then get overwritten by the iCloud settings and wipe the cal.
This is essentially what I did:
1. Disconnect from Internet (so iCloud cannot interfere)
2. Import archived backup into iCal (thus re-creating your diary as it was)
3. Export each calendar individually (file-export-export = .ics file for each calendar)
4. Re-connect to the Internet and on iCal app, ensure the account sync creates an iCloud ID within iCal settings (if not, delete the account and using your apple ID, create a "clean startup")
5. Ensure any iCloud calendars are deleted (minimum of 1 must remain so I created "temp").
6. Create new calendar names which match your previously used ones ("work", "personal" etc).
7. Check that the newly created calendars appear across all iCloud devices.
8. (Within iCal) Select file-import and choose your .ics file back up, it will ask you which calendar you want to use, pick the category ("work", "personal" etc) to which the back up applied.
9. Repeat step 8 for as many calendars as you have.
10. After syncing, all devices and the cloud should be showing sync'd calendars.
Good luck

Data lost after activating DSO

Similar Messages

Maybe you are looking for