Data Management Services with Cairngorm 2.1
Hello.
I have been using cairngorm 2.0 for a while, and I am now
trying to convert the 2.1 stuff over, including using cairngorm to
manage my DataServices. However I have some questions about it if
you have used it.
Using the command, and passing the command into the delegate,
and then firing the service from the delegate, there is a problem
trying to catch faults. Even though I have a fault method defined
on my command, and I am setting up the responder on the delegate as
the command which called it, the fault handler is not being fired.
I am generating a runtime exception on the java assembler just to
see what happens, and the delegate never fires the fault handler.
However if I remove the runtime excpetion from the java
assembler, and put a simple alert on the result, the delegate sends
to the commands result function, and the alert fires.
If you have any code examples, even if they dont have the
actual assembler behind them, I would really appreciate it. I dont
know if you are supposed to define commands which call DataServices
the same way you would declare a command that calls a RemoteObject.
If so how do you do that? What do you declare on the command to get
it to work?
If you have any ideas, please help.
Has this question already been answered on flexcoders? I
think the Cairngorm folks may be more plugged in there than here:
www.yahoogroups.com/group/flexcoders/
Seth
Similar Messages
-
ADS Data Manager Service problem
Hello,
I am trying to create a pdf document using ADS. While deploying it I am getting an error as follows:
ERROR LOG****************************
Failed to create a Data Manager. Please ensure that the Document Services Data Manager service is running:com.adobe.FailedCreationException
ERROR LOG ****************************
However I have checked my WAS, Data Manager service is running properly.Is there any setting on WAS which I am missing out?
Please guide...
Thanks and Regards,
Yashodhan MujumdarI have same problem. Did you find any solution?
-
When a PDF is created through the web portal BW gives the following error:
Log ID: 00505688424200660000001000001D940005122BD8D83308
Initial cause
Message: Processing exception during a "Render" operation.
Request start time: Thu Mar 26 08:20:15 CET 2015
com.adobe.ProcessingException: Failed to create a Data Manager. Please ensure that the Document Services Data Manager service is running
#1.5 #00505688424200690000001200001D940005122BD8D7D9B9#1427354415038#com.adobe.service.J2EEConnectionFactoryManagerPeerImpl#com.adobe/AdobeDocumentServices#com.adobe.service.J2EEConnectionFactoryManagerPeerImpl#ADSUSER#101#SAP J2EE Engine JTA Transaction : [03bffffffb7ffffffb2008ffffffe9]#P0VAPPSAPB1_BWP_3913650##5ebdcfeed38811e4ada90000003bb7b2#SAPEngine_Application_Thread[impl:3]_35##0#0#Fatal##Plain###Failed to allocate a connection due to an exception (the full stack trace is logged below): org.omg.CORBA.COMM_FAILURE: Could not connect to host and port localhost:3333, useSSL=false. There are not working dispatcher nodes. vmcid: SUN minor code: 2 completed: No#
#1.5 #00505688424200690000001300001D940005122BD8D7DC9A#1427354415039#com.adobe.service.J2EEConnectionFactoryManagerPeerImpl#com.adobe/AdobeDocumentServices#com.adobe.service.J2EEConnectionFactoryManagerPeerImpl#ADSUSER#101#SAP J2EE Engine JTA Transaction : [03bffffffb7ffffffb2008ffffffe9]#P0VAPPSAPB1_BWP_3913650##5ebdcfeed38811e4ada90000003bb7b2#SAPEngine_Application_Thread[impl:3]_35##0#0#Fatal##Plain###org.omg.CORBA.COMM_FAILURE: Could not connect to host and port localhost:3333, useSSL=false. There are not working dispatcher nodes. vmcid: SUN minor code: 2 completed: No
org.omg.CORBA.COMM_FAILURE: Could not connect to host and port localhost:3333, useSSL=false. There are not working dispatcher nodes. vmcid: SUN minor code: 2 completed: No
at com.sap.engine.services.iiop.server.CommunicationLayerImpl.retrieveDispAndConnID(CommunicationLayerImpl.java:544)
at com.sap.engine.services.iiop.server.CommunicationLayerImpl.getDelegate(CommunicationLayerImpl.java:608)
at com.sap.engine.services.iiop.internal.ClientORB.getDelegate(ClientORB.java:579)
at com.sap.engine.services.iiop.CORBA.CORBAObject.<init>(CORBAObject.java:49)
at com.sap.engine.services.iiop.CORBA.IOR.read_object(IOR.java:111)
at com.sap.engine.services.iiop.internal.ClientORB.string_to_object(ClientORB.java:536)
at com.sap.engine.system.ORBProxy.string_to_object(ORBProxy.java:290)
at com.adobe.service.J2EEConnectionFactoryManagerPeerImpl.getConnection(J2EEConnectionFactoryManagerPeerImpl.java:140)
at com.adobe.ads.remote.ServiceLocator.lookupDataManager(Unknown Source)
at com.adobe.ads.remote.ServiceLocator.getDataManager(Unknown Source)
at com.adobe.ads.remote.EJB_DataManager.getDataManager(Unknown Source)
at com.adobe.ads.remote.EJB_DataManager.<init>(Unknown Source)
at com.adobe.ads.request.Request.getDataManager(Unknown Source)
at com.adobe.ads.operation.Render.execute(Unknown Source)
at com.adobe.ads.operation.ADSOperation.doWork(Unknown Source)
at com.adobe.ads.request.Request.processOperations(Unknown Source)
at com.adobe.ads.request.Request.process(Unknown Source)
at com.adobe.AdobeDocumentServicesEJB.processRequest(Unknown Source)
at com.adobe.AdobeDocumentServicesEJB.rpData(Unknown Source)
at com.adobe.AdobeDocumentServicesLocalLocalObjectImpl0_0.rpData(AdobeDocumentServicesLocalLocalObjectImpl0_0.java:120)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:331)
at com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java:126)
at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:174)
at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:81)
at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:90)
at SoapServlet.doPost(SoapServlet.java:47)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1060)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
#1.5 #00505688424200690000001500001D940005122BD8D7DDF5#1427354415039#com.adobe.AdobeDocumentServices#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServices#ADSUSER#101#SAP J2EE Engine JTA Transaction : [03bffffffb7ffffffb2008ffffffe9]#P0VAPPSAPB1_BWP_3913650##5ebdcfeed38811e4ada90000003bb7b2#SAPEngine_Application_Thread[impl:3]_35##0#0#Error#1#/System/Server#Plain###Exception getting DataManager reference, trying again...#
#1.5 #00505688424200690000001700001D940005122BD8D7EF1B#1427354415044#com.adobe.service.J2EEConnectionFactoryManagerPeerImpl#com.adobe/AdobeDocumentServices#com.adobe.service.J2EEConnectionFactoryManagerPeerImpl#ADSUSER#101#SAP J2EE Engine JTA Transaction : [03bffffffb7ffffffb2008ffffffe9]#P0VAPPSAPB1_BWP_3913650##5ebdcfeed38811e4ada90000003bb7b2#SAPEngine_Application_Thread[impl:3]_35##0#0#Fatal##Plain###Failed to allocate a connection due to an exception (the full stack trace is logged below): org.omg.CORBA.COMM_FAILURE: Could not connect to host and port localhost:3333, useSSL=false. There are not working dispatcher nodes. vmcid: SUN minor code: 2 completed: No#
#1.5 #00505688424200690000001800001D940005122BD8D7F204#1427354415045#com.adobe.service.J2EEConnectionFactoryManagerPeerImpl#com.adobe/AdobeDocumentServices#com.adobe.service.J2EEConnectionFactoryManagerPeerImpl#ADSUSER#101#SAP J2EE Engine JTA Transaction : [03bffffffb7ffffffb2008ffffffe9]#P0VAPPSAPB1_BWP_3913650##5ebdcfeed38811e4ada90000003bb7b2#SAPEngine_Application_Thread[impl:3]_35##0#0#Fatal##Plain###org.omg.CORBA.COMM_FAILURE: Could not connect to host and port localhost:3333, useSSL=false. There are not working dispatcher nodes. vmcid: SUN minor code: 2 completed: No
org.omg.CORBA.COMM_FAILURE: Could not connect to host and port localhost:3333, useSSL=false. There are not working dispatcher nodes. vmcid: SUN minor code: 2 completed: No
at com.sap.engine.services.iiop.server.CommunicationLayerImpl.retrieveDispAndConnID(CommunicationLayerImpl.java:544)
at com.sap.engine.services.iiop.server.CommunicationLayerImpl.getDelegate(CommunicationLayerImpl.java:608)
at com.sap.engine.services.iiop.internal.ClientORB.getDelegate(ClientORB.java:579)
at com.sap.engine.services.iiop.CORBA.CORBAObject.<init>(CORBAObject.java:49)
at com.sap.engine.services.iiop.CORBA.IOR.read_object(IOR.java:111)
at com.sap.engine.services.iiop.internal.ClientORB.string_to_object(ClientORB.java:536)
at com.sap.engine.system.ORBProxy.string_to_object(ORBProxy.java:290)
at com.adobe.service.J2EEConnectionFactoryManagerPeerImpl.getConnection(J2EEConnectionFactoryManagerPeerImpl.java:140)
at com.adobe.ads.remote.ServiceLocator.lookupDataManager(Unknown Source)
at com.adobe.ads.remote.ServiceLocator.getDataManager(Unknown Source)
at com.adobe.ads.remote.EJB_DataManager.getDataManager(Unknown Source)
at com.adobe.ads.remote.EJB_DataManager.<init>(Unknown Source)
at com.adobe.ads.request.Request.getDataManager(Unknown Source)
at com.adobe.ads.operation.Render.execute(Unknown Source)
at com.adobe.ads.operation.ADSOperation.doWork(Unknown Source)
at com.adobe.ads.request.Request.processOperations(Unknown Source)
at com.adobe.ads.request.Request.process(Unknown Source)
at com.adobe.AdobeDocumentServicesEJB.processRequest(Unknown Source)
at com.adobe.AdobeDocumentServicesEJB.rpData(Unknown Source)
at com.adobe.AdobeDocumentServicesLocalLocalObjectImpl0_0.rpData(AdobeDocumentServicesLocalLocalObjectImpl0_0.java:120)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:331)
at com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java:126)
at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:174)
at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:81)
at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:90)
at SoapServlet.doPost(SoapServlet.java:47)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1060)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
#1.5 #00505688424200690000001900001D940005122BD8D7F530#1427354415045#com.adobe.AdobeDocumentServices#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServices#ADSUSER#101#SAP J2EE Engine JTA Transaction : [03bffffffb7ffffffb2008ffffffe9]#P0VAPPSAPB1_BWP_3913650##5ebdcfeed38811e4ada90000003bb7b2#SAPEngine_Application_Thread[impl:3]_35##0#0#Fatal##Plain###Fatal exception on second attempt at getting DataManager reference
com.adobe.ProcessingException: CORBA system exception instantiating a DataManager from the ConnectionFactory
at com.adobe.ads.remote.ServiceLocator.lookupDataManager(Unknown Source)
at com.adobe.ads.remote.ServiceLocator.getDataManager(Unknown Source)
at com.adobe.ads.remote.EJB_DataManager.getDataManager(Unknown Source)
at com.adobe.ads.remote.EJB_DataManager.<init>(Unknown Source)
at com.adobe.ads.request.Request.getDataManager(Unknown Source)
at com.adobe.ads.operation.Render.execute(Unknown Source)
at com.adobe.ads.operation.ADSOperation.doWork(Unknown Source)
at com.adobe.ads.request.Request.processOperations(Unknown Source)
at com.adobe.ads.request.Request.process(Unknown Source)
at com.adobe.AdobeDocumentServicesEJB.processRequest(Unknown Source)
at com.adobe.AdobeDocumentServicesEJB.rpData(Unknown Source)
at com.adobe.AdobeDocumentServicesLocalLocalObjectImpl0_0.rpData(AdobeDocumentServicesLocalLocalObjectImpl0_0.java:120)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:331)
at com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java:126)
at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:174)
at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:81)
at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:90)
at SoapServlet.doPost(SoapServlet.java:47)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1060)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Caused by: org.omg.CORBA.COMM_FAILURE: Could not connect to host and port localhost:3333, useSSL=false. There are not working dispatcher nodes. vmcid: SUN minor code: 2 completed: No
at com.sap.engine.services.iiop.server.CommunicationLayerImpl.retrieveDispAndConnID(CommunicationLayerImpl.java:544)
at com.sap.engine.services.iiop.server.CommunicationLayerImpl.getDelegate(CommunicationLayerImpl.java:608)
at com.sap.engine.services.iiop.internal.ClientORB.getDelegate(ClientORB.java:579)
at com.sap.engine.services.iiop.CORBA.CORBAObject.<init>(CORBAObject.java:49)
at com.sap.engine.services.iiop.CORBA.IOR.read_object(IOR.java:111)
at com.sap.engine.services.iiop.internal.ClientORB.string_to_object(ClientORB.java:536)
at com.sap.engine.system.ORBProxy.string_to_object(ORBProxy.java:290)
at com.adobe.service.J2EEConnectionFactoryManagerPeerImpl.getConnection(J2EEConnectionFactoryManagerPeerImpl.java:140)
... 37 more
#1.5 #00505688424200690000001B00001D940005122BD8D7F9BB#1427354415047#com.adobe.ads.request.Request#com.adobe/AdobeDocumentServices#com.adobe.ads.request.Request#ADSUSER#101#SAP J2EE Engine JTA Transaction : [03bffffffb7ffffffb2008ffffffe9]#P0VAPPSAPB1_BWP_3913650##5ebdcfeed38811e4ada90000003bb7b2#SAPEngine_Application_Thread[impl:3]_35##0#0#Error#1#/System/Server#Plain###Processing exception during a "Render" operation.
Request start time: Thu Mar 26 08:20:15 CET 2015
com.adobe.ProcessingException: Failed to create a Data Manager. Please ensure that the Document Services Data Manager service is running
Exception Stack Trace:
com.adobe.ProcessingException: Failed to create a Data Manager. Please ensure that the Document Services Data Manager service is running
at com.adobe.ads.operation.Render.execute(Unknown Source)
at com.adobe.ads.operation.ADSOperation.doWork(Unknown Source)
at com.adobe.ads.request.Request.processOperations(Unknown Source)
at com.adobe.ads.request.Request.process(Unknown Source)
at com.adobe.AdobeDocumentServicesEJB.processRequest(Unknown Source)
at com.adobe.AdobeDocumentServicesEJB.rpData(Unknown Source)
at com.adobe.AdobeDocumentServicesLocalLocalObjectImpl0_0.rpData(AdobeDocumentServicesLocalLocalObjectImpl0_0.java:120)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:331)
at com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java:126)
at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:174)
at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:81)
at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:90)
at SoapServlet.doPost(SoapServlet.java:47)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1060)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
#1.5 #00505688424200660000000700001D940005122BD8D80DDF#1427354415052#com.sap.tc.webdynpro.pdfobject.core.PDFObject#sap.com/irj#com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall#NGS_MM77#100##n/a##5ebdcfeed38811e4ada90000003bb7b2#SAPEngine_Application_Thread[impl:3]_2##0#0#Error#1#/System/UserInterface#Plain###Result(0): Error_Level is: 2#
#1.5 #00505688424200660000000900001D940005122BD8D80EA3#1427354415052#com.sap.tc.webdynpro.pdfobject.core.PDFObject#sap.com/irj#com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall#NGS_MM77#100##n/a##5ebdcfeed38811e4ada90000003bb7b2#SAPEngine_Application_Thread[impl:3]_2##0#0#Error#1#/System/UserInterface#Plain###Result(1): Results is: Processing exception during a "Render" operation.
Request start time: Thu Mar 26 08:20:15 CET 2015
com.adobe.ProcessingException: Failed to create a Data Manager. Please ensure that the Document Services Data Manager service is running
Exception Stack Trace:
com.adobe.ProcessingException: Failed to create a Data Manager. Please ensure that the Document Services Data Manager service is running
at com.adobe.ads.operation.Render.execute(Unknown Source)
at com.adobe.ads.operation.ADSOperation.doWork(Unknown Source)
at com.adobe.ads.request.Request.processOperations(Unknown Source)
at com.adobe.ads.request.Request.process(Unknown Source)
at com.adobe.AdobeDocumentServicesEJB.processRequest(Unknown Source)
at com.adobe.AdobeDocumentServicesEJB.rpData(Unknown Source)
at com.adobe.AdobeDocumentServicesLocalLocalObjectImpl0_0.rpData(AdobeDocumentServicesLocalLocalObjectImpl0_0.java:120)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:331)
at com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java:126)
at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:174)
at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:81)
at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:90)
at SoapServlet.doPost(SoapServlet.java:47)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1060)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
#1.5 #00505688424200660000000B00001D940005122BD8D80FBD#1427354415052#com.sap.tc.webdynpro.pdfobject.core.PDFObject#sap.com/irj#com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall#NGS_MM77#100##n/a##5ebdcfeed38811e4ada90000003bb7b2#SAPEngine_Application_Thread[impl:3]_2##0#0#Error#1#/System/UserInterface#Plain###Result(2): VersionInfo is: 800.20120718063822.876753#
#1.5 #00505688424200660000000D00001D940005122BD8D81033#1427354415052#com.sap.tc.webdynpro.pdfobject.core.PDFObject#sap.com/irj#com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall#NGS_MM77#100##n/a##5ebdcfeed38811e4ada90000003bb7b2#SAPEngine_Application_Thread[impl:3]_2##0#0#Error#1#/System/UserInterface#Plain###Result(3): TraceString is: Begin operation: Render, elapsed time = 7488 ms.
com.adobe.ProcessingException: Failed to create a Data Manager. Please ensure that the Document Services Data Manager service is running
End operation: Render, elapsed time = 7501 ms.
#1.5 #00505688424200660000000E00001D940005122BD8D81FB2#1427354415056#com.sap.ip.bi.export.xfa.impl.PDFConverter#sap.com/irj#com.sap.ip.bi.export.xfa.impl.PDFConverter#NGS_MM77#100##n/a##5ebdcfeed38811e4ada90000003bb7b2#SAPEngine_Application_Thread[impl:3]_2##0#0#Error##Plain###EXPORT XFA calcTemplate=Processing exception during a "Render" operation.
Request start time: Thu Mar 26 08:20:15 CET 2015
com.adobe.ProcessingException: Failed to create a Data Manager. Please ensure that the Document Services Data Manager service is running
Exception Stack Trace:
com.adobe.ProcessingException: Failed to create a Data Manager. Please ensure that the Document Services Data Manager service is running
at com.adobe.ads.operation.Render.execute(Unknown Source)
at com.adobe.ads.operation.ADSOperation.doWork(Unknown Source)
at com.adobe.ads.request.Request.processOperations(Unknown Source)
at com.adobe.ads.request.Request.process(Unknown Source)
at com.adobe.AdobeDocumentServicesEJB.processRequest(Unknown Source)
at com.adobe.AdobeDocumentServicesEJB.rpData(Unknown Source)
at com.adobe.AdobeDocumentServicesLocalLocalObjectImpl0_0.rpData(AdobeDocumentServicesLocalLocalObjectImpl0_0.java:120)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:331)
at com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java:126)
at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:174)
at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:81)
at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:90)
at SoapServlet.doPost(SoapServlet.java:47)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1060)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)Thanks Sandy,
I have already solved the problem , I have done the following actions:
1. Stop J2EE engine
2. rename folder
/usr/sap/<SID>/<Instance>/j2ee/os_libs/adssap
Please rename this adssap folder to adssap.old
3. Start J2EE engine
During starting J2EE engine, folder adssap will be re-generated.
4. Also make sure XMLform.exe is extracted under
/usr/sap/<SID>/<Instance>/j2ee/os_libs/adssap/XMLFormService/bin
I restarted the entire instance (ABAP and JAVA) and now all is running fine. -
Oracle Meter Data Management Integration with SAP ISU
Hello Everyone,
I am aware of the fact that Oracle has released a Media pack for the subject integration as discussed here and that media pack works only for SAP ERP 6.0 EHP 5 with ISU_AMI_2.
We have got OU MDM Release 2.1 Media Pack v4 and SAP ERP 6.0 EHP 4 with ISU_AMI_1 and hence Adapter in MDM won't help to achieve integration with SAP as our SAP EHP is lower than what is required for the MDM adapter. We have got SAP PI which would help the SAP End in the integration.
What are the possible work-around(s) to achieve the integration between Oracle MDM and SAP ISU without using the Media Pack/Adapter?
How does MDM exposes its services (inbound/outbound) to be consumed/triggered by External systems (i.e. SAP ISU)?
List of Services (inbound/outbound) exposed by Oracle MDM for integration?
Your time and help is much appreciated.
Regards,
Adil KhalilDid you find the document Oracle Utilities Customer Care and Billing - Meter Data Management Integration Implementation Guide?
I searched on eDelivery and Oracle Support, but cannot find the document. -
Data Manager logic with Java API
Hello, I have a pair questions:
1. I have 2 classificators (A and B) in SAP MDM repository, I would like to realize a filtration of a branch of classificator A, depending on the chosen branch of other classificator B.(Like In Data Manager)
2.I have a classificator in SAP MDM repository, I would like to realize a filtration of values of attributes, depending on the chosen branch of other classificator. (Like In Data Manager)
Edited by: Nikita Kravtsov on May 20, 2008 12:53 PMHi,
Your Question is bit confusion could you please give your exact requirement.
Thanks and Regards,
Ashok. -
How to use generated code from "Import Web Services" with Cairngorm Framework
I recently downloaded Flex Builder 3 beta 2 and tried out the
wizard that lets you import web services. The code that is
auto-generated makes if fairly straight forward to consume web
services using the object types defined in the WSDL. No longer does
the developer need to decode the XML payload! The only problem I am
having is how does you integrate the auto- generated code with the
Cairngorm framework? This seems like a huge question for anyone who
might want to leverage Cairngorm and the auto-generated proxy code
in the same project (like me).
Here are the problems that I see so far.
1) How do you configure the generated service class to work
with the Cairngorm service locator? The service constructor only
accepts a “LCDS destination string” which implies that
you must use Lifecycle data services. Unfortunately, the project I
am trying to retrofit currently uses a WebService and does not use
data services. All I really need to do is change the endpoint URL
(ie from local to a development server). This issue is noted in the
bug https://bugs.adobe.com/jira/browse/FB-8456. What I think is
needed is a way to set the endpointURI in the Services.mxml file.
2) Even if I come up with a hack around #1, I do not receive
a callback to my IResponder even though I register it immediately
after the method call. I can register and listener function within
my business delegate and receive the callback, but my Command
object, which implements IResponder, does not receive the call back
even though it is registered. From what I read in the ASDocs it
should but it doesn’t for me!
These are the issues I have observed in 3 hours of messing
with this. I hope this makes sense. I would love to integrate
auto-generated web service proxies into Cairngorm but I don’t
see a straight forward way without re-architecting Cairngorm. Has
any one else run across this issue? If so, do you have any insights
on how to proceed? Any help is appreciated.Since I posted this question, I have abandoned the notion of
auto-generated web services and embraced the good old FDS concept
where the RemoteObject meta-tag does all the conversion work for
me. We are now using the Granite DS package and it is working well
for us. I would love to consume web services, but it just isn't
worth the hassle when all you have to do with Granite (and FDS) is
cast your return objects to the proper object type.
BTW, since this posting, I have investigated competing Flex
app frameworks. After my research, I checked out the PureMVC
framework. Wow!! Cairngorm always left me with an uneasy feeling
and I guess I am not alone. Apparently, Cliff Hall felt the same
way. That is why he started the project. I like his approach alot
more than Cairngorm especially since it includes notifications
which allow me to broadcast my own app level events independent
from the AS Event framework. Check out PureMVC. For what it is
worth, it has my humble endorsement. Cliff was even gracious enough
to acknowledge the other Adobe Consulting guys for their work. Good
for you Cliff, I respect that. Check out a better way at
http://www.puremvc.org/ -
How to Customie Document Manager Service with a custom Java Application
Hi,
We have a requirement where we want to send customized emails to a group administrator whenever any document is uploaded using the Document Manager servie in Webcenter. For that we have written a java component for sending mails.
Could anyone tell me how do we make this java component work with the Document Manager upload action. how to modify it?
Any pointers would be appreciated.
Regards,
UShaThe FieldPoint Ethernet modules (as well as LabVIEW - DSC and Lookout) utilize a propietary National Instruments Ethernet protocol. The protocol is not published and is currently restricted to Windows based platforms. There are several interfaces that allow one to communicate using the proprietary protocol; including NI FieldPoint (which has interfaces for LabVIEW, OPC, LabWindows/CVI), Lookout, LabVIEW - DSC, DataSocket, and (I think) a ComponentWorks module). Even though several of these interfaces are multiplatform, the ethernet support will only work on Windows based platforms.
Whereas the FieldPoint ethernet protocol is proprietary and closed, the protocol for the serial modules is open and published in the FP-1000/1001 Programmers Reference Manual. You can build your own multi-platform solution that way. Alternatively, you can use the FP-20XX series of RT Controllers and embed a LabVIEW RT program that publishes the channel data in your own format that you can write a non-platform specific interface to.
Regards,
Aaron -
How to configure Rights Management Service with Exchange 2010
Dear All,
We need to configure RMS for file services and exchange 2010 server.
I have windows 2008 r2 as Active directory and exchange 2010 on 2008 r2 server.
please provide any documents or link for configure rms over file services and mail services.
is there require to purchase any license??
Sunil
SUNIL PATEL SYSTEM ADMINISTRATORAD RMS Microsoft Exchange Server 2010 Integration Guide
http://technet.microsoft.com/en-us/library/ee849857(v=WS.10).aspx
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter: LinkedIn:
Facebook:
XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose. -
Request management service issue with SSL Sites
Hi guys,
I've configured up the request management service, but after start the service on our wfe servers (even before to configure specific web applications), our ssl sites begin to fail and the event viewer start to alert several errors, by the other hand,
sites over 80 port with no SSL works as expected.
I've found some similiar scenarios without a happy ending. Below you can find some of the main errors in event viewer and ULS Logs. In
this post solved a very similar issue using ssl host headers with a unique ip but we are using fqdn certificates so it is not an option for us.
I've already checked the
good posts from Spencer Harbar and He says that is good idea to use host named site collection, but this is not an option for me because we need to use Self Service Creation and mixed authetnication, besides, None of the Technet literature that i've reviewed
says something about don't support path based site collection.
So far, the only way to avoid this errors is not using the service(discouraging finding), These are some errors we got on Event viewer and logs:
Machine 'MACHINENAME (AppPool(_LM_W3SVC_515444293_ROOT))' failed ping validation and has been unavailable since '3/28/2014 3:55:48 PM'. (Just starting the service Event viewer begis to have a bunch of this errors)
03/28/2014 13:34:01.96 w3wp.exe (0x1184)
0x154C SharePoint Foundation
Request Management ai2q3
High Reached maximum number of failed machines based on ping results for this routing group
53c2819c-8216-20f3-68c0-c0a3e55c92d5
03/28/2014 13:34:01.96 w3wp.exe (0x1184)
0x154C SharePoint Foundation
Request Management ai2q4
Medium Unavailable machines based on ping results: MACHINENAME
53c2819c-8216-20f3-68c0-c0a3e55c92d5
03/28/2014 13:34:01.97 w3wp.exe (0x1184)
0x1C2C SharePoint Foundation
Request Management adc7u
Medium Mapping URI from 'https://HOSTNAME:443/Style Library/somos-sura-css/inicio/inicio.css' to 'https://MACHINENAME/Style%20Library/somos-sura-css/inicio/inicio.css'
53c2819c-8217-20f3-68c0-cb2f392c388b
Seems like it tries to find a site with the machine name, not the host name registered in the Alter access mappings (like portal.acme.com) .
I would appreciate some feedback about this. Another posts with similar issues:
http://amolmeshe.blogspot.com/2013/05/sharepoint-2013-request-management.html
http://www.akspug.org/Blog/Post/4/Request-Management-and-Error-8316
Regards,Hi,
According to your post, my understanding is that you had an issue about the Request management service with SSL sites.
It’s a known issue that the request management service could not work with the SSL site.
We had already reported the issue to the product team, as a workaround, if you want to use the request management service, you can change the https site back to http.
What’s more, the SharePoint 2013 SP1 has been relased, you can install it to check whether it works.
http://support.microsoft.com/kb/2817429/en-us
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support -
Integration Oracle Utilities CC&B w/ non-Oracle bespoke Meter Data Management system
Hello all,
In your opinion, what's the best way to integrate a bespoke (non-Oracle) Meter Data Management system with Oracle CC&B 2.3.1 or 2.4?
I came up with a few possible scenarios and would love to hear your opinion:
1. Use CC&B Meter Read upload (MUP) batch process to upload reads from our bespoke Meter Data system.
2. The bespoke Meter Data Management system adds Meter Reads to CC&B using a CC&B Inbound Service.
3. At Billing time, CC&B invokes a Get Consumption Algorithm (invoked before the Bill Segment Creation Algorithm) which is responsible for requesting the reads from our bespoke Meter Data Management system.
This is the approach used by the Oracle CC&B-Oracle MDM integration when it comes to Usage requests/transactions.
4. Any other idea? Feel free to share.
ThanksHello all,
In your opinion, what's the best way to integrate a bespoke (non-Oracle) Meter Data Management system with Oracle CC&B 2.3.1 or 2.4?
I came up with a few possible scenarios and would love to hear your opinion:
1. Use CC&B Meter Read upload (MUP) batch process to upload reads from our bespoke Meter Data system.
2. The bespoke Meter Data Management system adds Meter Reads to CC&B using a CC&B Inbound Service.
3. At Billing time, CC&B invokes a Get Consumption Algorithm (invoked before the Bill Segment Creation Algorithm) which is responsible for requesting the reads from our bespoke Meter Data Management system.
This is the approach used by the Oracle CC&B-Oracle MDM integration when it comes to Usage requests/transactions.
4. Any other idea? Feel free to share.
Thanks -
Install OEM 12c fails on "start oracle management service". win2008
Windows Server 2008 R2 Enterprise SP1 x64
Oracle Database 11g release 11.2.0.3.0
I install OEM 12c(12.1.0.3) following this manual: Installing Enterprise Manager System
before start i've installed WebLogic Server 10.3.6 and aplied 2 patches specified in this manual
installation type is advanced, small, so i have created database from the appropriate template
i also installed cygwin and started ssh-service
the installation of OEM process fails on 73% "start oracle management service" with this message:
INFO: oracle.sysman.top.oms:Starting OMS ...
INFO: oracle.sysman.top.oms:Executing command: cmd /c set NEED_EXIT_CODE=1&&C:\Oracle\Middleware\oms\bin\emctl.bat start oms
INFO: oracle.sysman.top.oms:Oracle Enterprise Manager Cloud Control 12c Release 3
INFO: oracle.sysman.top.oms:Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
INFO: oracle.sysman.top.oms:Windows service OracleManagementServer_EMGC_OMS1_1 failed to be started
INFO: oracle.sysman.top.oms:Oracle Management Server is Down
INFO: oracle.sysman.top.oms:Please check C:/Oracle/gc_inst/em/EMGC_OMS1\sysman\log\emctl.log for error details
SEVERE: oracle.sysman.top.oms:Starting of OMS failed.
in C:/Oracle/gc_inst/em/EMGC_OMS1\sysman\log\emctl.log i got this:
2013-09-06 12:24:27,012 [main] ERROR commands.BaseCommand logAndPrint.620 - Oracle Management Server Could Not Be Started
Check EM Server log file for details: C:\Oracle\gc_inst\user_projects\domains\GCDomain\servers\EMGC_OMS1\logs\EMGC_OMS1.out
2013-09-06 12:24:27,012 [main] INFO commands.StartCommand startOMS.337 - startOMS finished with result: 1
2013-09-06 12:24:30,974 [main] INFO commands.StartCommand startOMS.371 - net start return code is 2
2013-09-06 12:24:30,974 [main] ERROR commands.BaseCommand logAndPrint.620 - Windows service OracleManagementServer_EMGC_OMS1_1 failed to be started
2013-09-06 12:24:34,094 [main] INFO commands.BaseCommand printMessage.404 - statusOMS finished with result: 8
2013-09-06 12:24:34,094 [main] ERROR commands.BaseCommand logAndPrint.620 - Please check C:/Oracle/gc_inst/em/EMGC_OMS1\sysman\log\emctl.log for error details
and in C:\Oracle\gc_inst\user_projects\domains\GCDomain\servers\EMGC_OMS1\logs\EMGC_OMS1.out this:
<06.09.2013 12:24:01 ICT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 23.25-b01 from Oracle Corporation>
<06.09.2013 12:24:01 ICT> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for 13349651 Thu May 24 10:18:28 IST 2012
WebLogic Server Temporary Patch for BUG14482558 Fri Jan 11 11:20:16 IST 2013
WebLogic Server 10.3.6.0 Tue Nov 15 08:52:36 PST 2011 1441050 >
<06.09.2013 12:24:03 ICT> <Info> <Security> <BEA-090065> <Getting boot identity from user.>
Enter username to boot WebLogic server:Error: Failed to get value from Standard Input
Enter password to boot WebLogic server:
<06.09.2013 12:24:04 ICT> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
There are 1 nested errors:
weblogic.management.ManagementException: Booting as admin server, but servername, EMGC_OMS1, does not match the admin server name, EMGC_ADMINSERVER
at weblogic.management.provider.internal.RuntimeAccessService.start(RuntimeAccessService.java:67)
at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:461)
at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:166)
at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:881)
at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:568)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:469)
at weblogic.Server.main(Server.java:71)
>
<06.09.2013 12:24:04 ICT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
wlst:
wls:/offline>
what I did wrong? how to start WLS server?Hi,
First of all with EM 12.1.0.x any version you are not required to install wls separately, we have single installer for em and wls. Is there any specific reason you installer wls separately?
Coming back to your issue: can you check
%OMS_HOME%\BIN>emctl istart oms completes successfully.
%OMS_HOME%\BIN>emctl istop oms completes successfully.
Also open an SR with Oracle support and share the number. We should debug such issue through SR so that we can share logs and come find a root cause. -
'Merge Data Values' on data manager package
Hi there
I have a query with the 'Copy' data manager package. We are currently selecting 'Merge Data Values' which appears to be finding anything where the key already exists and replacing it with the new data. That's fine.
However, our user is wanting to consolidate various different category members into a single category member. Therefore, we would like to run a package to SUM new values with what is already in the cube rather than first delete and replace with the latest value.
Is there a way to do this ?
Thanks
IanHi Ian,
Please read this: BPC 7.5/10.0 : MOVE Data manager Package with keyfigure additions on move
Or you can use script logic to add values like:
*REC(EXPRESSION=%VALUE%+[CATEGORY].[DESTINATION],CATEGORY=DESTINATION)
B.R. Vadim -
BPC 7.5 NW -- Data Manager Export: Fixed-Length Fields?
Hi Experts,
Client has a requirement that we export a batch of transaction data from BPC, which is generally no problem, but in this case they want to do it with Fixed-Length fields in the Export file.
I've done a lot of BPC Data Manager Imports with Fixed-Length fields, and that function really works well. But, has anyone tried to use the Export package with this option? It doesn't seem to be working in my case yet.
Any tips?
Thanks so much, as always,
Garrett
=======================
Update -- After going back to review documentation, it looks like the the *PAD() function is actually intended for export not really importing, which makes sense. ...The SAP online help library says that it's meant for import, but I now believe that is a typo.
Also, I've added the line "OUTPUTFORMAT = NORMAL" in my *OPTIONS section. Anyone else manage to get export working on BPC 7.5 NW
Edited by: Garrett Tedeman on Mar 3, 2011 1:37 PMUpdate -- This problem may now be resolved.
I have been able to conduct test IMPORTs of 48,000, then 96,000 and then 1.7 million records. All were fine.
It turns out that that difference is that the text files were sorted by amount in the ones that failed. They were sorted by GLAccount in column A for the ones that succeeded.
Edit: Yep, all files loaded normally when re-sorted by GLACCOUNT, etc. on the left-hand side. Apparently, when you're doing a lot of records that might confuse the system or something
Edited by: Garrett Tedeman on Nov 18, 2010 11:41 AM -
Exchange 2013 CU2 Hab trasnport and Microsoft Filtering management Services did not start
Did you were able to fix the issue I have the same problem after Access denied for Transport service and Microsoft Filtering Management Service with Error 0x8000405 unspecified error.
Hi,
From your description, I would like to verify if there is an event 2200 in Application log. If yes, please copy the ConfigurationServer.xml file from a normal Exchange server 2013 and add it to your Exchange server to check the result.
If there is no event 2200, please take your time to post your error event for my further research.
Here is a thread for your reference.
Unable to start Microsoft Exchange Transport and Microsoft Filtering Management Service
https://social.technet.microsoft.com/Forums/en-US/7473fa45-221d-4cfe-87d4-3dc697fc5c85/unable-to-start-microsoft-exchange-transport-and-microsoft-filtering-management-service-fms?forum=exchangesvrsecuremessaging
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support -
How can I use Data Source Explorer to connect soap service with my work manager project?
Hello,
I am new in Agentry and I want to Consume soap service in work manager project.For that I add my service in data source explorer but I dont have any Idea that how can I go further in that to use this service in my project.Are you consuming OData service or SOAP service ? Your heading says something but looking at screen it is OData service.
I have not worked on OData service in Agentry but hopefully you can figure out rest of the steps:-
Here are some high level steps you can follow depending on what your trying to do.
1. Open "Data Source Explorer" view->Eclipse, select "Window/Show View/Other->"Data Management/Data Source Explorer"
2. On "Data Source Explorer" view, ->"OData Connections"->right click and select "New...
3. Enter name of the connection profile.
4. Enter Service URI of in OData Connection Details
5. After "Test Connection", press "Finish" or click "Next" to view Summary.
6. Right click "Yourproject" node under "OData Connection", select connection. You will see "Entities"
7. Expand "ODataEntities", right click "Entityset", select "Agentry: Connector Studio\Object Wizard for OData".
8. Select a module to add odata connection, click "Next"; and click "Next"; and click "Next"
9. Check "Add", "Edit" and "Delete" on "Transaction Selection" screen.
10. Create your own screenset and platform as required.
11. Test the changes.
Thanks
Manju
Maybe you are looking for
-
Various 4G / 5G stability problems and now my iPod is USB 1.1 only!
Hi, I bought a brand new iPod a week or two ago and it worked fine for one sync. Then the battery was running low (because I'd been using it!) so I plugged it in and iTunes synced automatically and the battery charged. after the sync I hit "eject" in
-
Hyperion Planning - Link a web analysis report in a data form
Hi all, is actually possible to link a web analysis report in a planning data form? I tried from a custom menu but discovered that isn't possible. Any other way? I'm working with Planning 11.1.2.1 Thanks
-
Is there a way to tell why my mac keeps crashing?
Hi all, I hope someone can help me out. For the last month or so my Macbook Pro keeps crashing for no apparent reason. I have the sneaking suspicion that it all started after I bought a Razer Mamber and installed their driver, but I thought I had del
-
I am creating a project that will be projected onto a large screen, and I want to be sure it doesn't come up blurry. What size/settings are best for a project like this?
-
Hi Friends, I have a scenario....like...ECC to ECC using Asynchronous Proxies...... The scenario is......... When a user executes a report program in ECC1,he will get a selection screen to enter company code range and clicks on execute button..Then