Data missing in PDF output generated by RDF locally only for one time.

Hi All,
Could any one please help me in finding the reason of the below mentioned issue.
I have downloaded an RDF onto local machine and changed only sorting of few columns required.
After that I had generated PDf output on local machine for first few times PDF is generated with correct output.
Unfortunately when I again generated PDF output as final version, a few columns are missed in displaying in the PDF output. again I ran the RDF for next time and the PDF is generated correctly.
Now I want to know what may be the reason that for that time only PDF generated with missing data.
FYI, Problem occured in Report Builder *9.0.4.0.33*
This reason is really urgent and needfull for me.
Your help is very much appreciated.
Many Thanks in Advance.
Regards,
RRM

Hello,
What is the report orientation PORTRAIT/LANDSCAPE? What happens if you set the SYSTEM PARAMETER ORIENTATION to PORTRAIT/LANDSCAPE upon your report output and then generate again. While saving as PDF also see the page orientation.
-Ammad

Similar Messages

Calendar - when I want to edit a monthly recurring event but only for one month I am no longer given the box to update only that date.

Calenndar - when I want to edit a monthly recurring event but only for one month I am no longer given the box to update only that date month. How do I do this with the new operating system?

Adding to Alan's answer:
One of the problems that comes with these tricks for variable-rate acquisition is being able to match up sample data with the time that it was sampled.
If you weren't using either of E-series board's counters, there is a nifty solution to this! You'll be using 1 of the counters to generate the variable-rate sampling clock. You can then use the 2nd counter to perform a buffered period measurement on the output of the 1st counter. This gives you a hw-timed measurement of every sampling interval. You would need to keep track of a cumulative sum of these periods to generate a hw-accurate timestamp value for each sample.
Note: the very first buffered period measurement is the time from starting the 2nd counter until the first active edge from the 1st. For your app, you should ignore it.
-Kevin P.

How do I sync my new ipad mini with my old ipad 2, without losing any apps or data in notes? I need step by step instructions for first-time sync with ipad mini. Thanks.

How do I sync my new ipad mini with my old ipad 2, without losing any apps or data in notes? I need step by step instructions for first-time sync with ipad mini. Thanks.

If you synced it many times, you have to have a backup. It's just a question of how old that backup is now. When did you last sync?
First of all launch iTunes on your computer and go to Edit>Preferences>Devices. Do you see any backups for you iPad in that window? If so, how new is the newest backup? That will be the backup that you will want to use. But remember that if you use that backup and it is one month old, you can only restore from that date back in time. Anything that you did on the iPad in the past month will not be in that backup.
Turn on the new iPad Minin and start activating OTA via WiFi. You will get to a certain point in the process where you will be given the choice to Set up as new, Restore from iCloud - or Restore from iTunes. You will want to select Restore from iTunes.
That is the short and sweet version. There are step by step instructions in this article. This applies to the mini as well as the iPad 4 or the iPad 3 for that matter.
http://www.everythingicafe.com/how-to-set-up-new-ipad/2012/03/16/

Open dataset in binary mode-data missing in pdf file

Hi,
I am downloading a pdf file to the appl server using the below code.
open dataset filename for output in binary mode.
OPEN DATASET file_name FOR OUTPUT IN BINARY MODE.
     LOOP AT lines INTO ls_lines.
       TRANSFER ls_lines TO file_name.
     ENDLOOP.
     CLOSE DATASET file_name.
     MESSAGE 'File has been Transfered' TYPE 'S'.
pdf file is downloading to the appl server.
I am reading the file using CG3Y transaction, an found that some tax values are missing.
please advice on how to fix this issue ASAP.

Pls find the code..
In this case, the pdf file tax values are missing out as shown above screenshot..
i also tried with legacy binary mode and binary mode code page 1100.
* Convert OTF Data to pdf data
   CALL FUNCTION 'CONVERT_OTF'
     EXPORTING
       format                = 'PDF'
     IMPORTING
       bin_filesize          = pdf_size
     TABLES
       otf                   = ls_job_info-otfdata
       lines                 = lines
     EXCEPTIONS
       err_max_linewidth     = 1
       err_format            = 2
       err_conv_not_possible = 3
       err_bad_otf           = 4
       OTHERS                = 5.
   IF sy-subrc <> 0.
     MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
             WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
   ENDIF.
   LOOP AT lines INTO ls_lines.
     ASSIGN ls_lines TO <fs_x> CASTING.
     CONCATENATE lv_content <fs_x> INTO lv_content IN BYTE MODE.
   ENDLOOP.
* call SCREEN 9001.
   SHIFT wa_final1-vbeln LEFT DELETING LEADING '0'.
   SHIFT wa_final1-bstkd LEFT DELETING LEADING '0'.
   SHIFT wa_final1-kunnr LEFT DELETING LEADING '0'.
   IF sy-sysid = 'DEV' AND sy-mandt = '046'.   " Development Server or Client.
     CONCATENATE 'E:\OrdAckNotfctn\Acknowledgements\' wa_final1-erdat
        '_' wa_final1-bstkd '_' wa_final1-vbeln '_' wa_final1-kunnr '.Pdf'
        INTO file_name.
     OPEN DATASET file_name FOR OUTPUT IN BINARY MODE. "TEXT MODE ENCODING DEFAULT.
     LOOP AT lines INTO ls_lines.
       TRANSFER ls_lines TO file_name.
     ENDLOOP.
     CLOSE DATASET file_name.
     MESSAGE 'File has been Transfered' TYPE 'S'.
   ELSEIF sy-sysid = 'SBX' AND sy-mandt = '046'. " Testing Server or Client.
     CONCATENATE 'E:\OrdAckNotfctn\Acknowledgements\' wa_final1-erdat
          '_' wa_final1-bstkd '_' wa_final1-vbeln '_' wa_final1-kunnr '.Pdf'
          INTO file_name.
     OPEN DATASET file_name FOR OUTPUT IN LEGACY BINARY MODE. "TEXT MODE ENCODING DEFAULT.
     LOOP AT lines INTO ls_lines.
       TRANSFER ls_lines TO file_name.
     ENDLOOP.
     CLOSE DATASET file_name.
     MESSAGE 'File has been Transfered' TYPE 'S'.
   ELSEIF sy-sysid = 'PRD' AND sy-mandt = '046'. " Production Server or Client.
     CONCATENATE 'E:\OrdAckNotfctn\Acknowledgements\' wa_final1-erdat
       '_' wa_final1-bstkd '_' wa_final1-vbeln '_' wa_final1-kunnr '.Pdf'
       INTO file_name.
     OPEN DATASET file_name FOR OUTPUT IN BINARY MODE. "TEXT MODE ENCODING DEFAULT.
     LOOP AT lines INTO ls_lines.
       TRANSFER ls_lines TO file_name.
     ENDLOOP.
     CLOSE DATASET file_name.
     MESSAGE 'File has been Transfered' TYPE 'S'.
   ENDIF.

Data missing in PDF (external send - Medium 5)

We have an output condition record (ZSOR) that is configured for Medium types 1(print) & 5(email PDF).
When a sales order is saved ZSOR medium type 5 is automatically determine and the user who created the order (VBAK-ERNAM) receives an email with the output attached as a PDF.
When we open the PDF attached in the email, the form is missing all the data (all lines and constaints are there but the data from the variables is missing). If we repeat output via VA02 - the same thing happens ... but if we change the medium to 1 and print, everything is there - it prints fine.
Does any one know why the data would be missing in the PDF output?
Thanks.

Hi,
Send your o/p to spool and try converting it to PDF via RSTXPDFT4. If you get the o/p in PDF there, then we need check the details in your program closely.
Thanks
Seema

PDF Output generates invalid Thai output

PDF Output with English characters From Oracle Reports 6i is generated properly.
We are facing problems while generating PDF OutPut with Thai characters . The Reports builder shows proper Thai Character, but when we generate to PDF file the output shows invalid Thai Characters.
The environment variables set for this purpose are:
NLS_LANG was changed to THAI in Reports Server
THAI Fonts were installed in the Reports Server and also the machine hosting the Printer.
If anybodys knows the solution or can give a clue to sorting out this issue, it will be very helpful.
Best Regards,
Savitha.
null

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by SavithaG([email protected]):
PDF Output with English characters From Oracle Reports 6i is generated properly.
We are facing problems while generating PDF OutPut with Thai characters . The Reports builder shows proper Thai Character, but when we generate to PDF file the output shows invalid Thai Characters.
The environment variables set for this purpose are:
NLS_LANG was changed to THAI in Reports Server
THAI Fonts were installed in the Reports Server and also the machine hosting the Printer.
If anybodys knows the solution or can give a clue to sorting out this issue, it will be very helpful.
Best Regards,
Savitha.<HR></BLOCKQUOTE>
Now Report will not support multi-char while your DESTYPE='FILE' and DESFORMAT='PDF'. I got the same problem in Tradition Chinese.
So if you want to get a correct PDF file, you
can install a Acrobat Writer first and then
use the following setting: DESTYPE='Printer',
DESFORMAT='PDF',DESNAME='Acrobat PDFWriter'(<== your acrobat printer name).
After that, you can get a PDF file. But you have to key-in PDF file name as Acrobat printer dialog box will show up every time.I'll try to solve the problem to avoid user key-in every time. Now I still have no idea about it :(
null

Can't able to print Non English data properly in PDF Output

Can't able to print non english data properly
Example:
I want to print the germen data (Währung),But it printing like this (WÃ¤hrung) in PDF out put
What the changes i have to do to achive this
Thanks&regards
yamini

Hi Yamini,
I think this happens when you look at utf-8 in Windows wiith another character set. I've noticed that the XML file (and hence the PDF output) displays those characters when I preview reports on the BI desktop, but the output from the server is fine, so I don't worry about it.
Tore.

Why are dots missing from PDF output?

When I use the 'line' tool with dots, (in this case to draw a line-break,) AND export a .pdf, it often leaves out a single dot in the line. There are no objects intersecting the line, or even within a half-inch of its location. The missing dot is consistent across the document, nearly always the second or third dot in the line. And this happens with all forms of dots - normal, japanese, etc. The dot is present in the InDesign application, just not in the material it outputs.
Thanks a million for your help!
Screenshots below:

Hey Bob,
Looks like you're on to something with the program used to open it. While the PDF reader presents the problem, the web plugin does not. (It opens fine in both Chrome and Firefox.) And it renders just fine as imported into Illustrator.
So that really narrows the problem down to the renderer. I'll submit the bug report.
Thanks!!!

PDF output generated by XML Publisher is not printing in Dotmatrix Printer

Hi All,
We have designed a template for a particular concurrent program to print it's output format in PDF. The concurrent is running fine and it has produced the output in PDF format. But we are unable to take a printout of the output in our Dotmatrix printer (Epson FX2175). We configured PASTA driver as per the Metalink Note ID: 739186.1. By using this Configuration we are able to take printout in our hp LaserJet 1320 printer. But not able to take printout in Dotmatrix printer. If anybody faced the same problem and find a solution please share here. Any help would be appreciated.
Thanks in Advance,
Regards,
PLS
Edited by: user10088016 on Oct 31, 2008 9:41 PM

Hi,
I have a similar issue, where the output is coming with some junk characters while printing to the printer. I contacted my System Administrator regarding the PASTA driver being installed on the printer and it is already done, but I am still having the issue.
I am trying to print it from the Bursting control file, using following command : <xapi:print id="LOCALPRINT" printer="ipp://192.168.1.73:9100" copies="1" />
Can anyone help me out on this.
Thanks and Regards,
Sumanth

How do I find the creation date of a pdf file when the user did not enter one (doesn't show up in properties)?

I can't find the stamp in properties, etc.. does not show up. I do not know how to otherwise get the date. This is Version 1.4 (Acrobat 5.x) DPE build 5095

The data is not there at all. My mention of hidden metadata (perhaps confusing) is to emphasise that there IS NO hidden metadata, because that would be a Bad Thing.

Attempting to Save data from an access database file into a local variable for use.

Hello! i'm trying to develop a small text based game in Visual Basic 2013 and I've recently decided i need to use a more sophisticated data storage system then dozens of .txt files and stream-readers. i'm using Microsoft access and i completed my database
last night. it stores the stat and skill values of the player-character and the non-player characters. the problem is i cannot bring the data into visual basic in a usable way. using ado.net i can bring a single record into the system as a detail view and
then read the data in from the labels but i'd far prefer to have it done purely through code. the book i purchased only covers data grid views and detail view and I've spent several hours searching for a solution online.
for clarification. i need to read each value in a record into a variable so i can calculate the stats for the games combat system.

So, you want to select from MS Access?
Private Sub Form1_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Dim connectionString As String = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=C:\Users\Ryan\Desktop\Coding\Microsoft Access\Northwind_2012.mdb"
Dim selectCommand As String
Dim connection As New OleDbConnection(connectionString)
selectCommand = "Select * From MyExcelTable ORDER BY ID"
Me.dataAdapter = New OleDbDataAdapter(selectCommand, connection)
With DataGridView1
.AutoSizeRowsMode = DataGridViewAutoSizeRowsMode.AllCells
.AutoSizeColumnsMode = DataGridViewAutoSizeColumnsMode.ColumnHeader
.AutoSizeColumnsMode = DataGridViewAutoSizeColumnsMode.ColumnHeader
End With
Dim commandBuilder As New OleDbCommandBuilder(Me.dataAdapter)
Dim table As New DataTable()
table.Locale = System.Globalization.CultureInfo.InvariantCulture
Me.dataAdapter.Fill(table)
Me.bindingSource1.DataSource = table
Dim data As New DataSet()
data.Locale = System.Globalization.CultureInfo.InvariantCulture
DataGridView1.DataSource = Me.bindingSource1
Me.DataGridView1.AlternatingRowsDefaultCellStyle.BackColor = Color.Aqua
Me.DataGridView1.AutoResizeColumns( _
DataGridViewAutoSizeColumnsMode.AllCells)
End Sub
Then from DataGridView to a text file, right.
Private Sub button1_Click(ByVal sender As Object, ByVal e As EventArgs)
Dim dt As DataTable = New DataTable
Dim DBAdapter As OleDbDataAdapter = New OleDbDataAdapter
Dim connection As OleDbConnection = New OleDbConnection("Provider=Microsoft.Jet.OLEDB.4.0;Data Source=C:\\Users\\Excel\\Desktop\\Coding\\Microsoft Access\\Nor"& _
"thwind.mdb;Jet OLEDB:System Database=system.mdw")
Dim query As String = "SELECT * FROM Orders;"
connection.Open
Dim command As OleDbCommand = New OleDbCommand(query, connection)
Dim adapter As OleDbDataAdapter = New OleDbDataAdapter(command)
adapter.Fill(dt)
Dim writer As StreamWriter = New StreamWriter("C:\\Users\\Excel\\Desktop\\FromAccess.txt")
For Each Row As DataRow In dt.Rows
For Each values As Object In Row.ItemArray
writer.Write(values)
Next
Next
writer.Close
End Sub
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

Error displaying pdf (only for one user)

Hello,
A user is facing a problem when running a program that displays a pdf. He gets the error :
"Adobe could not open "xxx.pdf" because it*s either not a supported file type or because the file has been damaged..."
All other users can see correctly the pdf.
Any ideas why could this happen?
Thanks

Hi Lalmar,
You might be trying to download a pdf file and lock it with password using webservice. If there is a connection problem, the pdf would be corrupted.
But as you are saying its specific to a particular user ask him to check re-installing Adobe.
Regards,
P Gomatheeswaran

Generate different Supplier Number Sequence for One Operating unit!

R12.1.2
Dear Gurus,
We run multiple operating units under one Business Group and each of them are independent entities of their own with separate ledgers and currencies based on the territories.
We generate Supplier numbers automatically for all territories.
But, now we have a requirement from one of the territories that we need to generate supplier numbers in a different sequence (starting from 40000000000 onwards) just for that territory. We still would like to generate supplier numbers for the other operating units (territories) using the standard sequence.
Is this possible? If yes, please give details.
Thanks,
-Venkat

Hi Venkat,
Supplier Numbering configuration is not operating unit specific, hence the same numbering would continue to happen in the environment/application instance ...
The workaround would be turn off Automatic and switch to Manual numbering and check with the feasibility of having a customization and Personalization for meeting the requirement ....
Reference:
How is Supplier Number assigned in R12? [ID 1252934.1]
Regards,
Ivruksha

Load csv data error: ORA-01461: can bind a LONG value only for insert into

I am trying to upload a data file (from Access) and get the above error message. There is a comment field that is a memo type in Access. I have tried using VARCHAR2(4000) and CLOB as the data types but still get the same error. I searched for the forum for a workaround or fix but there doesn't seem to be any. Does anybody know of a working solution.
Thanks,

Anybody have any ideas?

Purchase order workflow generating mails to invalid peron for one plant

Hi,
I have a situation, where the user is receiving workitem mails to approve to outlook, even though he is not an approver. This is the case with only one plant. One more point is even in non-PO workflow, he is receiving the woritem mail execution mails, and plant is same as in PO workflow. Can anyone explain, where I can find the plant and this user relation and how it is happening.

Hi,
Check wrong user ID assigned release code in basis side in authorization(SU01 & PFCG) and also check wrong user ID assigned release code to following path:
SPRO ---> MM -> Purchasing- > Purchase Order- > Release Procedure for Purchase Orders- > Define Release Procedure for Purchase Orders--- > Workflow ---> Here against each release code assign OT as US and respective User ID's for Release
Regards,
Biju K

Data missing in PDF output generated by RDF locally only for one time.

Similar Messages

Maybe you are looking for