Data not able to fetch using RA_CUSTOMER_TRX_LINES_V in application site
Hi,
I am using RA_CUSTOMER_TRX_LINES_V view in few reports, this could able to returns data once I am running into the report builder, But when I am trying to run report request it does not do so..
Kindly suggest for solution
Thanks in advance,....
Your join is correct.
You should not get duplicates unless RA_CUSTOMER_TRX_LINES_V has multiple lines for the same trx_id.
select count(1) from .RA_CUSTOMER_TRX_LINES_V where customer_trx_id=754186
Hope this helps
Sandeep Gandhi
Omkar Technologies Inc.
Independent Techno-functional Consultant
Similar Messages
-
Not able to fetch the data by Virtual Cube
Hi Experts,
My requirement is I need to fetch the data from Source System (From Data base table) by using Virtual Cube.
What I have done is I have created Virtual Cube and created corresponding Function Module in Source System.
That Function MOdule is working fine, if Data base table is small in Source System.But If data base table contains huge amount of data (millions of record), I am not able to fetch the data.
Below is the code I have incorporated in my function module.
c_th_mapping TYPE CL_RSDRV_EXTERNAL_IPROV_SRV=>TN_TH_IOBJ_FLD_MAPPING.
DATA:
l_s_map TYPE CL_RSDRV_EXTERNAL_IPROV_SRV=>TN_S_IOBJ_FLD_MAPPING.
l_s_map-iobjnm = '0PARTNER'.
l_s_map-fldnm = 'PARTNER'.
insert l_s_map into table l_th_mapping.
create object l_r_srv
exporting
i_tablnm = '/SAPSLL/V_BLBP'
i_th_iobj_fld_mapping = l_th_mapping.
l_r_srv->open_cursor(
i_t_characteristics = characteristics[]
i_t_keyfigures = keyfigures[]
i_t_selection = selection[] ).
l_r_srv->fetch_pack_data(
importing
e_t_data = data[] ).
return-type = 'S'.
In the above function Module,Internal table L_TH_MAPPING contains Info Objects from Virtual Cube and corresponding field from Underlying data base table.
The problem where I am facing is, in the method FETCH_PACK_DATA, initially program is trying to fetch all the recordsfrom data base table to internal table.If Data base table so lagre, this logic is not working.
So would you please help me how to handle these kind of issues.Hi Experts,
My requirement is I need to fetch the data from Source System (From Data base table) by using Virtual Cube.
What I have done is I have created Virtual Cube and created corresponding Function Module in Source System.
That Function MOdule is working fine, if Data base table is small in Source System.But If data base table contains huge amount of data (millions of record), I am not able to fetch the data.
Below is the code I have incorporated in my function module.
c_th_mapping TYPE CL_RSDRV_EXTERNAL_IPROV_SRV=>TN_TH_IOBJ_FLD_MAPPING.
DATA:
l_s_map TYPE CL_RSDRV_EXTERNAL_IPROV_SRV=>TN_S_IOBJ_FLD_MAPPING.
l_s_map-iobjnm = '0PARTNER'.
l_s_map-fldnm = 'PARTNER'.
insert l_s_map into table l_th_mapping.
create object l_r_srv
exporting
i_tablnm = '/SAPSLL/V_BLBP'
i_th_iobj_fld_mapping = l_th_mapping.
l_r_srv->open_cursor(
i_t_characteristics = characteristics[]
i_t_keyfigures = keyfigures[]
i_t_selection = selection[] ).
l_r_srv->fetch_pack_data(
importing
e_t_data = data[] ).
return-type = 'S'.
In the above function Module,Internal table L_TH_MAPPING contains Info Objects from Virtual Cube and corresponding field from Underlying data base table.
The problem where I am facing is, in the method FETCH_PACK_DATA, initially program is trying to fetch all the recordsfrom data base table to internal table.If Data base table so lagre, this logic is not working.
So would you please help me how to handle these kind of issues. -
PCA query not able to fetch data
HI All, I have installed PCA Business content cube and all the queries available in the Business content relavant to the PCA cube. I have loaded one quarter worth of data. The Profit center - Balance sheet and Profit center - Income statement queries are not able to fetch any data. I am able to execute te query but the report has no data in it.
Can any one suggest me if there is any thingthat I can do or any ways to dedbug this query.
Has any one encountered similar poblemAre you executing this query "wide open" or you using Characteristic Restrictions and/or Variables that could be filtering out your data? Did you try executing the query using tcode RSRT via 'Execute + Debug'? That may help. Also, take a look at the source InfoProvider in LISTCUBE using the same criteria as the query to see if any data retrieve via that method.
-
my nightmare started when i upgraded my ipad to ios 7.0.2 i am not able access internet using cellular data, how can i revert to my old ios.wifi is ok , but cellular data is a big prob.can anybody help me ?
Can't downgrade on iOS ...
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If that doesn't help, tap Settings > General > Reset > Reset Network Settings -
Not able to fetch Roles for an user using HWF Identity XPath
Hi,
I am not able to fetch list of roles for a specific user using Human Workflow, Identity XPath. Using Script Activity when I am trying to call the menthod, the method doesn't return Role details. Any help will be appreciated...That's the rules of how it works. A request has 1 request form per resource for all users on the request. Those fields must all be marked as available in bulk as well to be viewed if you have more than 1 user on the request. If you need to provide different values based on the user, your best option is pre-populate adapters on the process form and use logic to populate the fields. You will not be able to manually provide different values during the request.
-Kevin -
Not able to fetch some network switches data in LMS 4.0
Hi Experts,
we have LMS 4.0 and we found one problem that some network switches data are not able to fetch with LMS.
what could be the reason to happen this type of problem?
please assist with best solution to resolve this issue..
Suhas B.Hi,
I am facing below problem
Config Archival Status
No. of Devices
Successful
48
Failed
1
Partially Successful
0
Total
1345
Configuration Never Collected
1338
So I look up a device in the Device Center, here is its Reachability Status:
SNMPv1 Read
Success
SNMPv2c Read
Success
SNMPv1 Write
Failed
SNMPv2c Write
Failed -
Not able to fetch serial number in MFBF
Hello,
We are doing production booking through MFBF transaction and the serial number has to be enterred for each backflush.
I want to check the serial number for validation, hence i am using user exit "ZXMRMU02" with customised code.
I need to fetch plant and posting date from input screen and compare the posting month with serial number letter(month) if both are matching then only I should be able to do MFBF otherwise system should through an errror message that " posting is not in current month.
The problem here is I am unable to fetch serial number from input screen (Program Name SAPLIPW1 & Screen Number 0200). however I am able to get Material , Posting dates, Plant.
Please suggest how can we fetch serial number from input screen.
when i go with field exit, I could fetch serial number but not able to fetch plant and posting dates which are in first screen.
Thanks,
KumarDear Kumar,
As per Std SAP behaviour, You can't use Serial Number Management for Goods Movement with Backflushing.When you are setting Backflush indicator as 1 always backflush in Material master system will not allow you to maintain serial number profile in work scheduling view.
Also go thr. SAP Note No. 317455 for more clarification about using serial numbers with backflushing.
Hope this helps.
Regards,
Tejas
Edited by: Tejas Pujara on Apr 10, 2009 7:12 AM -
11g R2(11.2.0.2)-Not able to connect using SID - Win 7 32 bit
Hi Experts,
I have installed 11gR2(11.2.0.2) on Win 7 32 bit OS.
I am able to start database and listener services without any problem. ORACLE_BASE and ORACLE_HOME variables are set.
I am even able to connect to database using "sqlplus user/pass". (With ORACLE_SID variable set)
However, sqlplus command hangs when I try to connect using SID "sqlplus user/pass@o11gr2".
(No error, after waiting for >20 minutes I have to kill the command.)
=================
Following in "C:\Oracle\product\11.2.0.2\dbhome_3\RDBMS\trace\o11gr2_ora_6352.trc"
- "2012-04-05 09:50:55.846: [ default]ut_read_reg:2:ocr registry key SOFTWARE\Oracle\ocr cannot be opened. error 2"
Following in "C:\Oracle\product\11.2.0.2\dbhome_3\log\machinename\client"
- 2012-04-26 14:35:18.781: [ default][1216]ut_read_reg:2:ocr registry key SOFTWARE\Oracle\olr cannot be opened. error 2
[ CLSE][1216]clse_get_crs_home: Error retrieving OLR configuration [0] [Error opening olr registry key. The system cannot find the file specified.
"tnsping" returns OK for "tnsping o11gr2", "tnsping localhost", "tnsping 127.0.0.1", "tnsping 192.168.0.1"
Output of LSNRCTL:
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 - Production
Start Date 26-APR-2012 14:35:17
Uptime 0 days 0 hr. 4 min. 6 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\Oracle\product\11.2.0.2\dbhome_3\network\admin\listener.ora
Listener Log File C:\Oracle\diag\tnslsnr\J1009615W7LT\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
Services Summary...
Service "O11GR2" has 2 instance(s).
Instance "O11GR2", status UNKNOWN, has 1 handler(s) for this service...
Instance "O11GR2", status READY, has 1 handler(s) for this service...
The command completed successfully
=================
This was working earlier. One day it stopped working all of a suddent and I am not able to connect using SID till now.
I tried re-installing in different home multiple times. But no luck even after disabling firewall completely.
Any suggest/help is greatly appreciated on this.------------------------------tnsping-------------------------
C:\>tnsping o11gr2
TNS Ping Utility for 32-bit Windows: Version 11.2.0.2.0 - Production on 26-APR-2012 14:54:32
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
C:\Oracle\product\11.2.0.2\dbhome_3\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = J1009615W7LT.jda.corp.local)(PORT = 1521
))) (CONNECT_DATA = (SERVICE_NAME = O11GR2)))
OK (30 msec)
C:\>
-----------------------------ping-------------------------------
C:\>ping J1009615W7LT.jda.corp.local
Pinging J1009615W7LT.jda.corp.local [fe80::20c9:b748:311a:95e4%14] with 32 bytes of data:
Reply from fe80::20c9:b748:311a:95e4%14: time<1ms
Reply from fe80::20c9:b748:311a:95e4%14: time<1ms
Reply from fe80::20c9:b748:311a:95e4%14: time<1ms
Reply from fe80::20c9:b748:311a:95e4%14: time<1ms
Ping statistics for fe80::20c9:b748:311a:95e4%14:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\>ping 10.60.200.221
Pinging 10.60.200.221 with 32 bytes of data:
Reply from 10.60.200.221: bytes=32 time<1ms TTL=64
Reply from 10.60.200.221: bytes=32 time<1ms TTL=64
Reply from 10.60.200.221: bytes=32 time<1ms TTL=64
Reply from 10.60.200.221: bytes=32 time<1ms TTL=64
Ping statistics for 10.60.200.221:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\>
-----------------------------C:\Oracle\diag\tnslsnr\J1009615W7LT\listener\alert\log.xml---------------------------------
</msg>
<msg time='2012-04-26T14:35:18.855-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
</txt>
</msg>
<msg time='2012-04-26T14:35:26.200-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:35:26 * ping * 0
</txt>
</msg>
<msg time='2012-04-26T14:35:43.204-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:35:43 * ping * 0
</txt>
</msg>
<msg time='2012-04-26T14:35:55.952-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Dynamic address is already listened on (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
</txt>
</msg>
<msg time='2012-04-26T14:35:55.953-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:35:55 * service_register * O11GR2 * 0
</txt>
</msg>
<msg time='2012-04-26T14:37:08.732-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:37:08 * ping * 0
</txt>
</msg>
<msg time='2012-04-26T14:38:34.943-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:38:34 * (CONNECT_DATA=(SERVICE_NAME=O11GR2)(CID=(PROGRAM=C:\oracle\product\11.2.0.2\dbhome_3\bin\sqlplus.exe)(HOST=J1009615W7LT)(USER=j1009615))) * (ADDRESS=(PROTOCOL=tcp)(HOST=fe80::20c9:b748:311a:95e4%14)(PORT=51907)) * establish * O11GR2 * 0
</txt>
</msg>
<msg time='2012-04-26T14:39:23.627-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>WARNING: Subscription for node down event still pending
</txt>
</msg>
<msg time='2012-04-26T14:39:23.628-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:39:23 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=j1009615))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=186647040)) * status * 0
</txt>
</msg>
<msg time='2012-04-26T14:54:25.550-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>System parameter file is C:\Oracle\product\11.2.0.2\dbhome_3\network\admin\listener.ora
</txt>
</msg>
<msg time='2012-04-26T14:54:25.551-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Log messages written to C:\Oracle\diag\tnslsnr\J1009615W7LT\listener\alert\log.xml
</txt>
</msg>
<msg time='2012-04-26T14:54:25.552-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Trace information written to C:\Oracle\diag\tnslsnr\J1009615W7LT\listener\trace\ora_11640_3776.trc
</txt>
</msg>
<msg time='2012-04-26T14:54:25.553-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Trace level is currently 0
</txt>
</msg>
<msg time='2012-04-26T14:54:25.553-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>
</txt>
</msg>
<msg time='2012-04-26T14:54:25.555-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Started with pid=11640
</txt>
</msg>
<msg time='2012-04-26T14:54:25.560-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
</txt>
</msg>
<msg time='2012-04-26T14:54:26.695-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Listener completed notification to CRS on start
</txt>
</msg>
<msg time='2012-04-26T14:54:26.712-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
</txt>
</msg>
<msg time='2012-04-26T14:54:29.880-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Dynamic address is already listened on (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
</txt>
</msg>
<msg time='2012-04-26T14:54:29.881-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:54:29 * service_register * O11GR2 * 0
</txt>
</msg>
<msg time='2012-04-26T14:54:32.090-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:54:32 * ping * 0
</txt>
</msg>
Edited by: 850920 on Apr 26, 2012 11:59 AM -
Error in Info Package - NOT able to be used as loading variant
Hii All
I develop a process chain where I extract data from ODS to Cube. Now I am getting an error. A info pkg for extracting data from ODS to Cube giving error message of InfoPackage ZPAK_XXX is generated; NOT able to be used as loading variant.
I am not able to understand why this error is coming ??
Plz tell me how to resolve it ??
I searched some documents but not cleared.
Thanks in advance
NehaHi
Create a new infopackage and try loading.
You can also refer to
[Full load ODS to ODS in a Process chain;
[Process chain; -
Not able to login using ORACLE USER in Linux
I am not able to login using OS user ORACLE in linux,
I am getting following error when trying to login
/etc/X!!/gdm/PreSession/Default : Registering your session with wtmp and utmp
/etc/X!!/gdm/PreSession/Default :running : /usr/bin/X11/sessreg -a -w /var/log/log/wtmp -u /var/run/utmp -x "/var/gdm/:0.Xservers" -h "" -1" : 0" "oracle"
/etc/profile: line 17 : syntax error near unexpected token 'then'
/etc/profile: line 17 ' if[ $USER = "oracle" ]; then'
Failed to execute message bus daemon : No such file or directory
EOF in dbus-launch reading address from bus daemon
I tried to edit /etc/profile file but not sucessfull. Please help me out . This installtion is on VM ware
Edited by: user12356407 on Dec 16, 2009 3:21 AMuser8896383 wrote:
I am not successful to login using Oracle User .
I tried to edit /etc/profile file on Line 17 , but of no use.
could you please be more precise about what exactly i should look in or edit in that file.
Thanks for your immediate response.My car doesn't start
I tried to fix it
It still doesn't start.
Can you be more precise in telling how to fix it. -
Does anyone know why I am not able to see images on some web sites using safari 5.1.7?
I have enabled the apperance tab to display images.Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found
-
How do I get an app that I paid for transferred over to my iPhone? I paid for it and its not able to be used on iPad!
Assuming you're using the same Apple ID, just download it onto your iPhone.
-
As of this morning I am not able to scroll using Magic Mouse in MS Word for Mac 2011 (V14.4.5) on a MacAir with Yosemite (V10.10). It seems to be isolated to MS Word. Any thoughts?
Have tried suggestions from here and elsewhere but scrolling not working for me (in Word only!) on magic mouse or trackpad.
MS Word for Mac 2011 (V14.4.6) with Yosemite (V10.10) -
I am not able to signin using apple ID in imassge and face book it says user name or password wrong plz help
I think there has been a change in the password requirements for apple ID's. I think it now needs to be eight characters long and have at least one capital letter and one number. Got to appleid.apple.com and then to manage your account and change your password to something that meets the requirements I mentioned and see if that helps
-
InfoPackage is generated; NOT able to be use as variant.
Hi Experts ,
when i am creating process chain itgives me an erro like
InfoPackage ZPAK_4JC3WU0BJTYAY158ED085A45W is generated; NOT able to be used as loading variant
1) Start variant
2) Delete index
3) load info packe
4) create index
when i am activate it gives me above error massage in the 3 rd step .
i tried to include any info package it gives me same error.
Any suggestion realy appriciated
thanks in advance
Regards,
ve.Hi Sudeep,
thanks for u suggestion , but i have tried manually it is loading good. but when i am include those infopackage in process chain it gives me error massage like Infopackage is generated not able to be use as variant.
Even i tried another infopacke and another start variants it gives same error.
any help really appriciated.
BR,
/ve.
Maybe you are looking for
-
DateNavigator in Safari Brower shows junk character
Dear All, In Safari browers (all versions), DateNavigator UI element is shows junk character. To reproduce this error, please follow the below steps. 1. Click on the date picker. 2. Try to change the month from u201CJuly to Augustu201D or
-
How to send an Email using SMTPSSLTranport of JavaMail
Hi, Provide me any sample code to send the mail using SMTPSSLTransport of JavaMail. Thanks,Sujata.
-
Firefox 4 issue with certain websites and mp3s
Downloaded Firefox 4 for my Mac 10.6.7. I'm no longer able to watch certain videos (like those at adultswim.com) or listen to mp3s. Know this has to do with plugins, but I can't figure out which ones are the issue.
-
Can somebody help me in getting some good material for Regular Expressions and IP Community list
can somebody help me in getting some good material for Regular Expressions and IP Community list
-
Lumia 920, screen rotation not working, loosen obj...
I have pre-ordered the lovely yellow 920 from Telstra Australia, in November, arrived around start of December. It is a fantastic phone to use, however there are several hardware and software issues influencing this experience in a bad way. Anyone ha