Data not refelecting in DB

Hi ,
Oracle 10.2.0.1.0
I am running a application from c# , and updating some rows in Oracle DB through a SP. procedure is running successfully but the data change (updation) is not appearing in DB . I have followed sane steps in oracle like commiting at application level ( completion of Transaction ) , handled exceptions ( no exceptions arised ) . please help

Hi,
The problem may be how u r calling the SQL Stored proc. in your C#.net code.
because while passing ORacle parameter to the SP's there may be problem of variable binding like in SQL Server we are using (@) operator and ORacle we are using (:).
Please check and execute SP's once from backend by passing same parameter, whether it's working or not...?
Thanks/Regards,
Bhavin Patel

Similar Messages

Data not received in PSA Table

hi guyz,
im facing the below issue while loading master data attr from source system to bi system.
im loading data from 0vendor_attr to ovendor object.
only half of the records are processed and gets hanged.
in monitor- administrator workbench its showing (60434 from 157912 records)
below are the details of the issue:
Data not received in PSA Table
Diagnosis
Data has not been updated in PSA Table . The request is probably still running or there was a short dump.
Procedure
In the short dump overview in BI, look for the short dump that belongs to your data request. Make sure the correct date and time are specified in the selection screen.
You can use the wizard to get to the short dump list, or follow the menu path "Environment -> Short dump -> In Data Warehouse".
Removing errors
Follow the instructions in the short dump.
please guide with your expertise.
cheerz,
raps.

Hi Rajeev,
Check the job in Background (SM37), you can analyze from here.
Check the short dump in ST22.and check system performance once.
If you are facing this problem first time, cancel the background job and make the request red.
Then repeat the IP again, it will get successful.
This should be due to performance issue or RFC problem of your system.
If the job is active in SM37, cancel the job and make the status IP red.
Re run the IP, it will get successful.
Regards,
Venkatesh
Edited by: Venky1903 on Aug 15, 2011 2:09 AM

Data not received in Data target

Hi,
I have got the following message on the monitor after I ran an infopackage. I am running an infopackage that loads data from ODS1(Datasource) to ODS2. While I ran the infopackage I have got this message.
"Data not received in InfoCube / PSA object / InfoObject
Diagnosis
Data has not been updated in InfoCube / PSA object / InfoObject . The request is probably still running or there was a short dump.
Procedure
In the short dump overview in BW, look for the short dump that belongs to your data request. Make sure the correct date and time are specified in the selection screen.
You can use the wizard to get to the short dump list, or follow the menu path "Environment -> Short dump -> In Data Warehouse".
Removing errors
Follow the instructions in the short dump."
The status is yellow. After the predifined time it turns into red. On the left hand side of the monitor it shows time and (0 records from 675). I have checked ST22 and there are no short dumps.
This is all happening at the processing step 'Service API'. Any thoughtfull idea are appreciated with points.

Hi,
I have created new infopackage and ran. Now the following message I have got on the monitor.
"Data not received in PSA Table
Diagnosis
Data has not been updated in PSA Table . The request is probably still running or there was a short dump.
Procedure
In the short dump overview in BW, look for the short dump that belongs to your data request. Make sure the correct date and time are specified in the selection screen.
You can use the wizard to get to the short dump list, or follow the menu path "Environment -> Short dump -> In Data Warehouse".
Removing errors
Follow the instructions in the short dump."
Any more thoughts?
Thanks,
Rao.

Data not received in InfoCube / PSA object / InfoObject

Hi Experts,
i written code against keyfigure to convert values in to same currency values and assigned constant USD for the reference characterstic.
Now i tried reload the data but it throws error as 'Data not received in InfoCube / PSA object / InfoObject'
i hope you all understand my problem. if so please advise.
Thanks,
RK
Edited by: RK on May 21, 2009 6:48 PM

Did you try looking into short dump about the problem ?
try these links :
Short Dump "Data not received in InfoCube / PSA object / InfoObject"
Short Dump "Data not received in InfoCube / PSA object / InfoObject"

Data not received in PSA Table(urgent)

hello,
While loading Master data full load
which is a load of 457070 on 2days back
where only 4lac records r received to PSA but remaining 57070 was missing
with error<b> Data not received in PSA Table
</b>
when the next day we loaded 5lac records and we got the same error<b> Data not received in PSA Table</b> where except 57070 records remaining all reached PSA
where we tried 2day with 550000 records, same error without 57070 records all other reached to PSA
I required ur help to solve this
i will thank by giving points
Regards
PSC

Hi,
check if there is a TRFC haging in SM58.
can that be that your DB cannot extend its space for this amount of data.
How do you perform the load?
package by package (in series or in parallel)? could that be that the next stage (into IObj) is failing thus stopping the load in the PSA?
Can you try to perform the same load with only to PSA and then enable the "susbsequent update in target"?
As already mentionned it could also be that an IDOC is haging...
please let us know
Olivier.

Data not received in PSA Table 0ORGUNIT

Hi,
We have an issue with a text load to 0ORGUNIT with around 35 lakhs of records. This particular load taking lot of time and resulting in short dump with the message 'Data not received in PSA Table'. But when iam making the request red and restarting it manulally it will get succeeed with in 15 minutes. The load is starting at 2:30 UK time and getting failed. I am restarting it at around 9 '0 clock and it got succed . The same thing happening from past 7 days. Can any one tell me what might be the reason and solution for this? Is this temporary memory issue? As the load is to an info object nothing to do with indices.
Thanks in advance
K

You can change the size of the Data Packet.
Open InfoPackge.
From Top Menu choose "Scheduler >> DataS. Default Data Transfer".
Default setting of the Source System will be shown.
Keeping that in mind, try to reduce the "Max Size" & "Number of Data Packages per Request". You might need to try this a couple of times with lesser values each time to ensure that the issue resolves.
Regards
Anujit Ghosh

Data not received in PSA Table - Data of request already deleted

Hi
I'm running a delta load on a BI 7.0 system and get this error Data not received in PSA Table.
And when I click on the PSA table it telling me that Data of request XXXXXX already deleted.
I have tried to do a consistency check in RSRV. See if there's any IDOCs in pb87.
And the short dump analysis just say:
A RAISE statement in the program "SAPLRSSM" raised the exception
condition "NOT_EXIST".
Since the exception was not intercepted by a superior
program, processing was terminated.
I've also tried to repeat the load but with no luck.
Anyone know how to fix this?
Thank you in advance

Hi,
Delete the bad requests in 3 targets and delete the data mart status in Source DSO.
Also delete the green request in the Source DSO and repeat it.
Once it loads successfully then load the data to other 3 targets.
Rgds,
Ram

Data not received in InfoCube / PSA

Hi Everybody,
Today all the loads are failed with the Error "Data not received in InfoCube / PSA object / InfoObject", Could you please help how to solve the problem.
Regards
BW

Hi
First check that your ODS is active
Then ensure it has data activated and for the selection you want to extract
What kind of load are you performing? A full or a delta?
In any case when you fire your InfoPackage from the ODS to the cube a job named BI_REQ* will be kicked. Check this job in SM37. If you can open an InfoPackage with your ODS as DataSource then the DataSource is fine and the transfer program is activated.
Monitor this job and see what happens.
If the job is cancelled for any reason, look if there is a dump (ST22), a system message in the log (SM21 on all appserv) and if there is a TRFC transaction with error in BW (SM58).
Please let me know
regards,
Olivier.

DroldF.dat not found

Hi,
I try to install the following code
CREATE INDEX IDF_FULL on ECOLORF.INDEXATION(FICHIER)
INDEXTYPE IS ctxsys.context
PARAMETERS
('datastore CTXSYS.FILE_DATASTORE
LANGUAGE COLUMN LANGUE
LEXER mylex
FORMAT COLUMN FORMAT
WORDLIST DEFAULT_WORDLIST
STOPLIST multistop
MEMORY 2M SYNC (EVERY "SYSDATE + 1/24/6")');
and I have the error :
DRG-11446: fichier de base de connaissances fourni C:\oracle\product\10.2.0\db_1\ctx\data\frlx\droldF.dat non installé
+(file droldF.dat not found)+
(Same thing with an Oracle 11g on another server)
When removing 'LEXER mylex' in the create index, it's OK, but I have some difficulties with the french accents.
The only file in the directory xxxxx\db_1\ctx\data\frlx\ is drfr.is
On [this forum|http://kb.dbatoolz.com/tp/2796.drg-11446_droldusdat_not_installed.html] , it is told that the missing files are on companion CD in stage/Components/oracle.cartridges.context.knowbase/10.1.0.2.0/1/DataFiles/data.jar, but only iin the R1 release (not the R2)
But I can't find this companion CD. Where are they in OTN ? How to download old versions ?
Or more simply : who have all these files droldF.dat, droldUS.dat and can furnish them ?
Best regards

Your lexer definition presumably includes INDEX_THEMES = YES.
If you change that it will work. Otherwise you need to download the database examples for 11g, which include the knowledge base.
Sometimes can be tricky to find - if you download the full set of files it should include the examples.

Data not populating after DS enhancement

HI pros,
i have made Data source enhancement.
i wrote the code in include program.
when '0FI_GL_40'.
CHECK NOT c_t_data[] IS INITIAL.
LOOP AT c_t_data ASSIGNING <fs_data5>.
SELECT SINGLE matnr FROM bseg INTO <fs_data5>-ZZMATNR
                         where BUKRS eq <fs_data5>-BUKRS and
                               BELNR eq <fs_data5>-BELNR and
                               GJAHR eq <fs_data5>-GJAHR and
                               BUZEI eq <fs_data5>-BUZEI.
endloop.
but the data not populating into the report, the Multi provider is real time
krish..

Hi,
Syntax
ASSIGN mem_area TO <fs> casting_spec range_spec.
Effect
This statement assigns the memory area specified using mem_area to the field symbol <fs>. You can assign a data object or a memory area calculated from the address of a data object. After the assignment, the field symbol refers to the assigned memory area and can be used in operand positions. When used in a statement, it behaves like a dereferenced data reference, meaning that the statement works with the content of the memory area.
The data type with which the assgigned memory area is treated, depends on the specifications in casting_spec. You can either execute an explicit casting or the field symbol takes on the data type of the data object specified in the assignment. A field symbol to which a memory area is assigned, has this data type after the assignment and behaves like a data object of this type.
The assigned memory area mem_area must be at least as long as the data type specified in casting_spec and must have the same alignment. If the data type determined in casting_spec is deep, the deep components with their type and position must appear in the assigned memory area exactly like this.
Use the specifications in range_spec to restrict the memory area that can be assigned to the field symbol.
You have to assign it back to internal table to modify the content.
Check in debug mode if you have still doubt.
regards,
Raju

Data not available in infocube

hi all,
I havae an Infocube for which data is coming from the ods.
yesterday i found the data is not available for an info object in ods for which data is there in source system.
then I manually enter the data in the ods and today morning when i check the data in the cube it is still displaying blank but data is there in ods.
thanks in advance
sridath
Edited by: sridath on Nov 19, 2008 7:31 AM

Hi,
There could be many reason for that data not coming to the cube.
are you able to see the the data in the DSO for this object??
Are there any routine written in the cube and the records getting deleted or changed in that?
If the value of this object is getting populated through some routine??
Are you checking the values in the report or in the cube??
The value for this object may be in the after image record in the cube....so check all the records in the cube for the same value of the key fields of the DSO which has values missing.
Delete the data from the cube through a selective deletion for this record which you want to get changed and then do a full repair from the DSO for same selections.
Indexes and compression will not affect this process in any way but once request is compressed it ccannot be deleted and you will have to delete the value from the cube through seletive deletion.
Thanks
Ajeet

Stock report with value and qauntity for given date not month wise

Hi gems,
can any body give me the standard report for Stock value and qauntity for given date not month wise at storage location level

Hi
check the report S_P00_07000139 with the option inventory and raw material report- detail and selection date (from, to date same). List will give opening & closing balances with goods movment and their values.
Thanks

Manual Layout data not saving to trx cube

Hello BPS Experts,
I am trying to load some data using manual planning. I open the layout and enter the values and press save. I do not find any requests / data in the cube.
case 1) No error / warning
I do not get any error during the save function in the layout. What could be the possible step I am missing. What could be the root cause..
case 2) message - No data to be saved
sometimes i get a message 'No data to be saved'. And that data is not getting saved. What could be the reason of this message.
Regards,
BWer
Message was edited by: BWer

Hello BWer,
One of the main reasons for data not saving from a layout into a Trx cube, is if there is no key figure being updated. The value of the key figure being posted should <> 0.
If you choose the option to display transaction data in your layout, then, only data with key figure values <> 0 will be displayed.
Sunil

GL Data not available on report

Hi All,
I have a report which has been working fine. The report was based on cost for controlling cube which is based of WBS elements(cost).
Now the report has been added with a column which gets its data from GL cube. I have added the 2 cubes in a multiprovider but cannot see the data for the column from GL.
This same GL cube is being used on multiple other queries and has no problem.
What could be the reason for the GL data not being displayed. I have also restricted to the respective infoproviders.
Appreciate all the help.
Kind Regards
James

hi,
first of all check in tcode LISTCUBE for MP if you are getting data for any of the columns from GL cube.
also check the characteristics from controlling cube and GL cube which are common and whether they have the same length , data types and values. The join at the MP level may not be working correctly which is why the data may be missing.
regards,
Arvind.

In VA01 In Schedule line Delivery date not getting populated

Hello,
We have developed enhancement for VA01 tcode.
Depending upon the quatity entered for a material it should show one more item as free good.
If quatity is 10 for a line item 10 then it should show item 20 by default same mateerial and quatilty as 1.We have done this it is working fine.
But if we select free good item in our case it is 20 and click on schedule line item buttom all quaitity fields getting populated.but delivery date not getting populated for only free good.for line item 10 it showing properly.
Can any one please suggest what i need to do in order to display delivery date for free good.
Thanks in advance.
Regards.

Thanks for your response.
Actually i have seen technical settings for that field.it is rv45a-etdat.this field has value till MV45AFZZ.seen in debugger.
Looks like it is clearing some where after the above include.Any suggisitions welcome.Thanks again.

Data not refelecting in DB

Similar Messages

Maybe you are looking for