Data Roll back When Java Server Down.

hi
When sending the data to DB using JDBC,the data is not effecting in Data base because of Java Server Down.
Is there any Procedure for Rollback the data.
Thanks in Adavnce

There isn't any rollback functionality in XI.
U can try resending the data from XI.
Regards,
Prateek

Similar Messages

HT202643 OK so I rolled back to Java 1.6 per the instructions but!!!

OK so I rolled back to Java 1.6 per the instructions but now the Java icon doesn't work in system pref's anymore. Not sure if that will cause a problem but it would be nice if that button worked again. Is there a fix for this?

Thanks for the heads up Kappy. Do you know how to remove the button from Sys Pref's? The newer version of Java was saved per the instructions so I guess the Icon will come back if necessary when I upgrade again. I rolled back for PhpStorm IDE which doesn't seem to like the most recent version of Java from Oracle.

How can I roll back a java update?

This morning we did our monthly take-down-the-server-run-all-the-software-updates, and it included "Java for Mac OS X 10.6 Update 16" Now our java software is totally hosed.
How do we roll back to the previous version of java?

We used Pacifist ( http://www.charlessoft.com/ ) to re-install the java Update14
This is shareware and he asks for $20. We are sending him $100!!!!
-- that's us doing the happy dance!!!
(We have Update15, but, a) apple has removed it from the support downloads site, and b) 16 came really fast after 15 -- so I suspect that 15 is broken somehow. The guessing game is a little annoying -- an article on the support page that would come up when you search for java for 10.6 update 15 saying that apple has removed the update and don't install it if you downloaded it would be, well, courteous!)
Note -- this seems to have worked just fine to clean up whatever update 16 broke for us, but I suspect that we could have used pacifist to install updates 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 and then 14 and been really really likely to undo whatever bad thing update 16 did.
Another note... Got into this mess because I was trying to minimize downtime. I've never had a problem with a java update before so I got greedy/sloppy. Sure plenty of OTHER people have had problems with java updates, but, well, what is that old saying?
Smart People learn from their mistakes. And Really Smart People learn from other people's mistakes!
So, if you can't be Really Smart, at least be Smart!

Roll back when trying to install iTunes with the version higher than 10.5

I insall successfully with the iTunes with the version under 10.5. But my iPhone is not supported with those version. So I tried the new versions that are higher than 10.5 but a problem occurred during the installation.
"An error occurred during the installation of assembly 'Microsoft.VC80.CRT,type="Win32",version=8.0.50727.6195",publicKeyToken="1fc8b3 b9a1e18e3b",processorArchitecture="x86"'
Please refer to Help ans Support for more information. HRESULT:0x800736FD."
When I click OK, it rolls back. Then it started to run the rest apps of iTunes.
Anyone can help me, please!
Thank in advance!

Maybe no one can help!

Transaction rolled back when system exception occurs.

Hello,
I understand that when a exception occurs that extends RuntimeException or RemoteException, the current transaction is rolled back. Is that also the case when the system exception is caught and dealt with?
Julien Martin.

Hi Julien,
It depends whether the system exception was ever propagated back to the container. E.g. If the container-managed transaction only spans a single EJB business method and the exception is both thrown AND caught within that business method, then no, the container will not mark the tx for rollback.
However, take the case where EJBs A and B both have container-managed transactions and tx attribute TX_REQUIRED. If EJB A calls business method foo() on EJB B and foo() throws a system exception, the tx will be marked for rollback by B's container as part of the post-processing of foo(). When control returns to EJB A, the same tx is still active, but it has been marked for rollback. Even if EJB A "eats" the system exception and returns normally, it won't change the disposition of the transaction, so the tx will be rolled back by A's container.
--ken
Kenneth Saks
J2EE SDK Engineering
SUN Microsystems

ITunes 10.5.1 won't install. Keeps "rolling back" when nearly complete...

I've emptied the temp folder, deleted the old version of iTunes, downloaded the installer to install from my desktop. It goes all the way through the installation process, then at the last minute "rolls back" and gives me an error message saying to try it again. I've tried several times. What's blocking the installation? Thanks for your suggestions.

unplug phone from computer.
Update computer ( apple menu)
DO NOT UPDATE ITUNES
After each update go back to apple menu and check for updates.
Only when you have completely updated computer ( only itunes comes up for updating) do you update itunes.
Follow all instructions.
Then restart computer.
Plug in phone.
Message appears... do you want to update..... follow instructions.
It actually took me the better part of sunday afternoon, but worth it.

Java server down

hi all,
currently i'm using 2 java server connect to one abap server, the issue i'm having not is my java server suddenly can't be bring up this morning after the offline backup was finish running, i try login to my abap server using sapjsf and is working, beside that i also try login using j2ee_admin user and it prompt me that i have to put a new password, i delete the user and recreate again using all the same role and profile also put back the old password, but the java server still not working, now i try to stop the 2nd java server and try to bring up, the same thing happen to my 2nd java server, is there anyway met this issue before?

Please post the logs of std_server .out for both the Java system .
I dont undestand that y did you delete the j2ee_admin you would have simply changed the password and updated the password in the configtool keystore.
Thanks
Rishi Abrol

How to roll back when procedure fails

Hi All,
In my process using procedures i am droping the temp tables and creating temp tables ,if any procedures fails how should roll back all the process
Procedure1(droping tables)----->procedure2(creating table1)--------->procedure3(creating table2)------->procedure4(Validaating accounts in table2 and creating seperate table)
Any suggestion please
Thanks in Advance

Let's say in your package you have your 4 procedures (Proc1, Proc2, Proc3, Proc4).
Also create 3 additional procedures:
RollBack1 -> Does the opposite to Proc1 (i.e. if Proc1 drops a table, then Rollback1 will create it)
RollBack2 -> Does the opposite to Proc2
RollBack3 -> Does the opposite to Proc3
Your logic will be:
If Proc1 is successful, then execute Proc2.
If Proc1 is unsuccessful, then end.
If Proc2 is successful, then execute Proc3.
If Proc2 is unsuccessful, then use an on failure path (red line) to execute RollBack1.
If Proc3 is successful, then execute Proc4.
If Proc3 is unsuccessful, then use an on failure path (red line) to execute RollBack2, followed by RollBack1.
If Proc4 is successful, then end.
If Proc4 is unsuccessful, then use an on failure path (red line) to execute RollBack3, followed by RollBack2, followed by RollBack1.
It mightn't be necessary to undo everything - but you'll know your own business needs to make a decision on that.

Photo Elements 11 fails to load and rolls back when it starts 'installing shared services'

Photoshop Elements 11 fails to load and rolls back as soon as it switches to 'installing shared services'. How can I overcome this? Premier Elements is already loaded and works fine including the Organiser. Photo Elements 10 is still on the system and also works fine.
System - Windows 7 OS1

Hello
I have tried that previously, it didn’t work then and it doesn’t now.
What I have just done is run the installation until it came up with the error message and killed the set-up file & windows installer. Photoshop elements seems to be almost installed. Organiser works for both Premier & Photoshop. What files etc would have been loaded from the point of the error message? The installation worked on a borrowed laptop (on 30 day trial). Hopefully all I need to do is copy the missing files across if you could advise what they are.
Regards
Bryan

Suffix data gets deleted when SunOne server is restarted

I manually created a new suffix for a program I'm installing. The program, during configuration, creates directory entries in this new suffix. Everything works great, but whenever you restart the SunOne server, the data entries underneath this suffix get deleted. the suffix is still there, but when you click on the Directory tab in the console, the directory entries have all disappeared for the suffix I created. Very bizarre. Any help would be appreciated!

I checked both the access and the error logs, nothing of significance shows up. The suffix was originally created from the console manually. This problem occured on a Solaris 9 server, but I have been able to re-create it very easily on a Windows 2000 Advanced server.
Using VMWare, I can easily keep going back and forth from the image with the data and the image with the data missing. I've also noticed that if I try to do an export of the data for this suffix, I get an error that says
"LDAP server is unwilling to perform". I'm wondering if these two errors are related. When I try to do an export with a different suffix on this server, it works great. Right before you do the export, it tells you that if the server does not have the proper access rights on this file, the export will not succeed. I'm not sure how to check that. I did create the suffix manually from the console logged in as cn=Directory Manager". Should I be using a different id? Thanks for your help!

HP Data Protector: Backing up deduplicated server

Hello,
I'm using HP Data Protector 6.21, and I'm trying to find out if it's possible to use this to back up a Windows Server 2012 R2 with deduplication enabled. I've seen on other forums that people are able to run the backups successfully, but they still have questions about whether or not the data is valid, or the amount of data backed up doesn't match the used space on the server, etc. Does anyone have any experience with this configuration?
- Scott

Ok I ran a consistency check and it completed successfully with the following message. However after a few minutes of it showing OK it now shows Replica is Inconsistent again.
Type: Consistency check
Status: Completed
Description: The job completed successfully with the following warning:
An unexpected error occurred while the job was running. (ID 104 Details: Cannot create a file when that file already exists (0x800700B7))
More information
End time: 2/3/2015 11:19:38 AM
Start time: 2/3/2015 10:34:35 AM
Time elapsed: 00:45:02
Data transferred: 220.74 MB
Cluster node -
Source details: G:\
Protection group members: 35
Details
Protection group: E*
Items scanned: 2017709
Items fixed: 653
There was a log for a failed synchronization job from yesterday here are the details of that.
Type: Synchronization
Status: Failed
Description: The replica of Volume G:\ on E*.net is not consistent with the protected data source. (ID 91)
More information
End time: 2/2/2015 10:04:01 PM
Start time: 2/2/2015 10:04:01 PM
Time elapsed: 00:00:00
Data transferred: 0 MB
Cluster node -
Source details: G:\
Protection group members: 35
Details
Protection group: E*

XMLConnector No.Data.Received only when on server

I've been making a simple RSS reader flash widget for my web
page. It works perfectly when I test it locally, but when I publish
it, I always get the No.Data.Received error. I've played with all
the parameters on the XMLConnector and all the publish settings,
but no dice.
The only thing that I can think of is that I'm loading RSS
from a different site, but it isn't restricted in any way.
Too see it not working:
http://www.kevingoldsmith.com/testing/rssreader5.html
I also posted the fla:
http://www.kevingoldsmith.com/testing/rssreader5.fla
this has been driving me insane, so anything that anyone can
help with would be awesome. I've searched the web, but I haven't
found anything...

thatÂ´s a security issue
search adobe.com for "crossdomain.xml"
only work around:
make a serverside script load the rss stuff and transfer it
to flashplayer.
perry
UCKevinG schrieb:
> I've been making a simple RSS reader flash widget for my
web page. It works
> perfectly when I test it locally, but when I publish it,
I always get the
> No.Data.Received error. I've played with all the
parameters on the XMLConnector
> and all the publish settings, but no dice.
>
> The only thing that I can think of is that I'm loading
RSS from a different
> site, but it isn't restricted in any way.
> Too see it not working:
http://www.kevingoldsmith.com/testing/rssreader5.html
>
> I also posted the fla:
http://www.kevingoldsmith.com/testing/rssreader5.fla
>
> this has been driving me insane, so anything that anyone
can help with would
> be awesome. I've searched the web, but I haven't found
anything...
>

Avoid transaction roll back using exception handler

Hi everybody!
I've created a proxy service in OSB using a DB adapter for polling from a database table. I've configured the service to be transactional with same transaction for reponse. The proxy has a route node that routes to a business service created from a db adapter for storing the polled data. Insert table has a db trigger associated wich raises a custom exception in certain cases. I need to catch that exception in the route exception handler to avoid the full transaction to be marked rolled back. For this, I've setup a response with failure action in the handler.
After testing the service I realized that it's not working as expected as transaction is being rolled back when the trigger raises the exception (so registry is not marked as polled in source table).
Could anyone explain me which action should be taken to avoid a rollback when handling exception?
Best regards,
Daniel.

Hi Athhek,
If I set reply with success then both route node and system error handlers are executed. I get following response metadata
<con:metadata      xmlns:con="http://www.bea.com/wli/sb/test/config">
<tran:response-code      xmlns:tran="http://www.bea.com/wli/sb/transports">1</tran:response-code>
</con:metadata>
and also following error reaches system handler:
<con:fault      xmlns:con="http://www.bea.com/wli/sb/context">
<con:errorCode>BEA-382050</con:errorCode>
<con:reason>
Expected active transaction, actual transaction status: Marked Rollback
</con:reason>
<con:location>
<con:path>response-pipeline</con:path>
</con:location>
</con:fault>
When I set reply with error only route node handler is executed but I still get
<con:metadata      xmlns:con="http://www.bea.com/wli/sb/test/config">
<tran:response-code      xmlns:tran="http://www.bea.com/wli/sb/transports">1</tran:response-code>
</con:metadata>
Thank you.

Report Action in JMS Proxy gets rolled back

I am using the report action to do auditing in my proxies. To date this has worked well for both successful and error transactions.
However when using a jms proy the report actions get rolled back. They actually didn't get rolled back when I was using the test console, but when the data comes from the queue they do.
Is there a way to change this behaviour so that the report is always separate from the main transaction?
Could this be a pointbase issue and will it have a differnt result using Oracle?
Thanks,
Ryan

You can always write your own implementation of a reporting provider, overriding teh default report action. I once made a post about this: http://forums.bea.com/thread.jspa?threadID=400001303
By using a custom implementation you can meet your own company's specific reporting requirements.
If you want to stick with out-of-box report action:
- Pointbase can be tricky, best to test with oracle.
- It depends on the jdbc driver used, ie XA or non-XA.
Find tips and tricks about ALSB at my blog: http://dev2dev.bea.com/blog/jordinho/

Photoshop Elements/Premiere 9 OEM Bundle not installing. Rolls back at end

I have a toshiba satellite T135 with AMD Turion Neo X2 Dual Core processor L625, 4 GB RAM, ATI Radeon HD 3200 graphics operating on Windows 7 64 bit Home Premium edition.
I am trying to install adobe photoshop elements 9 and adobe premiere elements 9. It gets to the end where it is almost done. Icon on desktop, and then it decides to rollback the installation. I tried many of the suggestions on this forum: copied disc info to folder on c drive. Started with a clean boot. That actually made it worse because it also caused the computer to blue screen.
Here are come windows errors that pop up at the end:
prior to clean boot installation:
Files that help describe the problem:
C:\Users\Sara\AppData\Local\Temp\WERDE2B.tmp.WERInternalMetadata.xml
C:\Users\Sara\AppData\Local\Temp\WERF841.tmp.appcompat.txt
C:\Users\Sara\AppData\Local\Temp\WERFB5D.tmp.WERDataCollectionFailure.txt
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\windows\system32\en-US\erofflps.txt
Post clean boot installation:
Problem signature:
Problem Event Name:                        BlueScreen
OS Version:                                          6.1.7600.2.0.0.768.3
Locale ID:                                             1033
Additional information about the problem:
BCCode:                                               1000007e
BCP1:                                                    FFFFFFFFC0000005
BCP2:                                                    FFFFF80002CD3670
BCP3:                                                    FFFFF88002FD37F8
BCP4:                                                    FFFFF88002FD3060
OS Version:                                          6_1_7600
Service Pack:                                       0_0
Product:                                               768_1
Files that help describe the problem:
C:\Windows\Minidump\031611-44912-01.dmp
C:\Users\Sara\AppData\Local\Temp\WER-103569-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\windows\system32\en-US\erofflps.txt
Please help me get this software installed. Frustrating that a legit well known piece of software has so many problems just getting installed.

I am trying to install a new purchased version of PSE 9 and havin the same issues. It simply rolls back when near the end of the installation process.   I am on hold with phone support now, but from the sounds of things here on this forum, Adobe is aware of the issue but has no suggestions to fix it.
This is the first time in my life that I have had issues with installing a new, purchased piece of software.
C'mon Adobe Support, time to answer us on this and get it solved, or perhaps you would offer us refunds?

Data Roll back When Java Server Down.

Similar Messages

Maybe you are looking for