Data source in R/3 for BW - 0UC_SALES_SIMU_01

I am using the Data source 0UC_SALES_SIMU_01 for extraction from R/3 to BW. The extractor of this data source is Function module named -ISU_BW_SIM_SALES_STATS_DUMMY.
There is no code under this FM. Do I need to write the code for extraction under this FM?
Because when I run the Extractor it is not fetching any data although I have created the data.
This data source is basically for Unbilled revenue reporting.

Hi,
You will have to run mas simulation billing in ISU to bring unbilled revenue and consumption.
Please carry out the below steps.
- Go to transaction EAMS20 to Define Simulation Periods for the Simulation run.
Initially for a unique Simulation Period ID, choose option Create Mass Simulation
Indexes
- From transaction EAMS10, execute creation of Mass Simulation Indexes.
- Once the above step is completed, go back to EAMS20 and change Simulation Run Status to Bill Mass Simulation Indexes
- From transaction EAMS00, execute the Mass Billing.
Based on this data is populated into BW Delta queue.
Data source 0UC_SALES_SIMU_01 uses dummy function module to extract the data into BW from delta queue. You do not have to write any code to bring the data. Delta is generated by mass simulation run.
I hope this resolve your problem.
Regards
Pushparaj.

Similar Messages

How to set JDBC Data Sources in Oracle MapViewer for Oracle database 12c Release 1 (12.1.0.1)

How to set JDBC Data Sources in Oracle MapViewer for Oracle database 12c Release 1 (12.1.0.1)?
The following is my configuration in the conf\mapViewerConfig.xml:
<map_data_source name="mvdemo12"
jdbc_host="127.0.0.1"
jdbc_sid="orcl12c1"
jdbc_port="1522"
jdbc_user="mvdemo"
jdbc_password="7OVl2rJ+hOYxG5T3vKJQb+hW4NPgy9EN"
jdbc_mode="thin"
number_of_mappers="3"
allow_jdbc_theme_based_foi="true"
editable="true"/>

But it does not work.
After use "sqlplus mvdemo/[email protected]:1522/pdborcl", it connected to the Oracle database 12c.
Does anyone know it?
Thanks,

For 11.1.1.7.1 use the syntax for jdbc_sid, i.e.
//mypdb1.foo.com as described in the README,
- MapViewer native (non-container) data sources can now use database service name in place of SID. To supply a db service name, you will use the same jdbc_sid attribute, but specify the service name with double slashes in front, such as follows:
<map_data_source name="myds"
    jdbc_host="foo.com"
    jdbc_sid="//mypdb1.foo.com"
    jdbc_port="1522"
/>
For 11.1.1.7.0 use a container_ds instead.
i.e. instead of using
<map_data_source name="my_12c_test"
                   jdbc_host="mydbinstance"
                   jdbc_sid="pdborcl12c"
                   jdbc_port="1522"
                   jdbc_user="mytestuser"
                   jdbc_password="m2E7T48U3LfRjKwR0YFETQcjNb4gCMLG8/X0KWjO00Q="
                   jdbc_mode="thin"
                   number_of_mappers="6"
                   allow_jdbc_theme_based_foi="false"
                   editable="false"
   />
use
<map_data_source name="my_12c_test"
                   container_ds="jdbc/db12c"
                   number_of_mappers="6"
                   allow_jdbc_theme_based_foi="false"
                   editable="false"
   />
In my case the Glassfish 3.1.2.2 JDBC connection pool definition was
Property
url jdbc:oracle:thin:@mydbinstance:1522/pdborcl12c.rest_of.service.name
Uncheck the Wrap JDBC Objects option in Advanced panel, i.e. the Edit JDBC Connection Pool Advanced properties page.
Add a JDBC resource for that newly created pool
Use that in mapviewerconfig.xml as above

Exception Message: The form cannot connect to the data source. Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'

When opening a form in SharePoint 12013 that was created from Infopath 2013, I get the following error.
You do not have permissions to access a database that contains data required for this form to function correctly.
An entry has been added to the Windows event log of the server.
Log ID:5566
When I go to the log files on the SharePoint server. I see the following error.
Exception Message: The form cannot connect to the data source. Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'
I am guessing this has something to do with the UDCX connection and the database.
Can anyone help me get this fixed?

Hi Jim,
Please check the following kb article when it occurs 5566errro with the UDCX conection file, try the method of using the Secure Store Service to store alternate credentials for the data connection method, or the method of stating the credentials
in the UDC file explicitly.
Also check if it could help with setting sql server as "SQL Server and Windows Authentication mode".
http://support.microsoft.com/kb/981684
Thanks
Daniel Yang
TechNet Community Support

Which Master data Source (Attr) is available for the field VBUK-GBSTK

Hi
Which Master data Source (Attr) is available for the field VBUK-GBSTK (Document Status).
Please help me.
Thanks
Mannev.

Hi Mannev.
I don't think that you will find GBSTK in any master data source. It is however available in 2LIS_11_VASTH.
Hope it helps.
BR
Stefan

Setting Up an ODBC Data Source in Windows XP for PostgreSQL Unicode

Can someone help me setup an ODBC data source for a PostgreSQL Unicode database?
1. Under which tab(s) should I setup the Data Source: User DSN, System DSN, File DSN?
2. The check boxes on Advanced Options Pages 1 and 2, which should be checked?
I have Crystal Report XI, Windows XP, and PostgreSQL Unicode Version 08.1.0100.
Thanks!
Glynn

Here it is, there is an issue with our Search functionality with the new SDN:
Symptom
When setting location on a Crystal Reports XI Report using the Progress OpenEdge ODBC Driver in Crystal Reports 2008 or Crystal Reports 2011 get “Some tables could not be replaced, as no match was found in the new data source. Please specify the table required for any unmodified tables.”
Environment
Crystal Reports 2008 or 2011
Progress OpenEdge ODBC Driver
Reproducing the Issue
Open a Crystal Report created in CR XI Report using the Progress OpenEdge ODBC Driver in Crystal Reports 2008 or 2011
Set location to a new ODBC Data Source
Get error "some tables could not be replaced, as no match was found in the new data source. Please specify the table required for any unmodified tables.”
Cause
Crystal Reports XI only creates aliases for tables with special characters or duplicate names.
Crystal Reports 2008 introduces a change which requires aliases for all tables.
Aliases are not created when doing a Set Location on the whole data source.
If a Customer has hundreds of reports they cannot set location of each table and fix the aliases.
Resolution
Upgrade to Crystal Reports 2011 Support Pack 02 or higher
Under registry key [HKEY_LOCAL_MACHINE\SOFTWARE\SAP BusinessObjects\Suite XI 4.0\Crystal Reports\Database\ODBC] create string UseTableNameAsAlias and set it to PGPRO1019.DLL, PGOE1022.DLL. Registry file is attached.
Keywords
Set Location
Progress ODBC
Crystal Reports 2008 2011

How to restrict "insert new data source" in Analysis, edition for Microsoft Office report

Hi Experts,
There is a requirement in my current project: when an end user access a Analysis, edition for Office Report from BI platform, they can view and refresh the report. But users should not be able to add new data source in that Analysis Report. As per my understanding, that means "insert data source" button should remain disable for the user.
I have check all available access levels from CMC, but cannot find any. It will be great if you let know correct access level in CMC for the same.
Any comments/recommendation will be appreciated.
I am using BOXI4.1 SP3 version with Microsoft Office 2013.
Thanks in advance.
Regards,
Animikh Chaudhury

The answer from our account manager is that there is only one license model for AO - which means every user is able to refresh, navigate, use planning functions and add source data (whith the standard license). Adding a DS is not really more then navigation because you can build a Query with all key figures and characteristics of a cube which gives you flexibility. That makes sense because there are no authority checks installed from SAP to avoid this (maybe this is different in combination with HANA and workspaces) .
Futhermore SAP has no possibility to measure how many users are doing which functions instead of recording every action of every user. But where should they do it? You could use it with BO or with Netweaver or in mixed Environments. The BO license check is done on BO platform and there you have no possibility to create new users which you need for connection (I'm not sure how this is monitored in a pure BW Environment without BO).
Furterhmore another possibility to add new data is using vba. You don't really need the buttons from the menu.

Getting BW and third party data source into SAP Cloud for customer

Hi Experts.
I have an architecture question and would like to know any guidance or pointers to help. We have a requirement to integrate 3rd party data sources to be brought into SAP cloud for sales so that reporting can be driven out of SAP cloud for sales. What is the best approach to do it.
Client doesn't want users to go to another site to look for reporting data.
Worst case scenario, is there a way to show BW or Third party reports in a separate tab where we can fetch the report data for user or may be a redirect link displays home page of reports under new tab without user leaving the cloud for sales application.
Thanks
Apoorva

Hi Vivek/Mithun,
I have brought in data from BW system to C4C using Webservice and stored it in C4C backend.
I am building a custom datasource from these variables, but I want to restrict access of this data based on user roles.
However, while creating the datasource "Enable Access Control" checkbox is not enabled. The help text says "To enable access control your BO must contain an association marked as relevant for access control".
Could you help me in understanding how can we enable this feature for our custom datasource?
I have also raised a separate thread also for this query Require more details on "Enable Access Control" feature of Data source
Thanks and Regards,
Manasi

Flat file data sources info pack executing for long time with yellow

I can see flat file all records 140 in above screen but i could not see data in PSA . when i am trying to see the PSA it show not data .
I have tries to make status to green but still request not process to Data target .

HI,
When you see message like there is no psa mean data source was not in active.
so activate your data source Thru by using SE38 - RSDS_DATASOURCE_ACTIVATE_ALL(bw 7.x).
After the activation you can try to load data.before that make your yellow request to red status and delete it.
later reload the same flat file.
Thanks

Which data sources Can i use for Vendor line items

Dear Experts,
I want to load the Vendor Line Items Data.In Rsa5 I found
0fi_ap_3: Vendors: Line Items
0fi_ap_4: Vendors: Line Items with Delta Extrcation
0fi_ap_30: Vendor Line Items
What is the differences of the 3 Datasources.
Which Datasource can i use.In my R/3 side they used EHP3.
Could you please guide me what is the use of EHP3. What Cude and Dso can I use.
Thanks in Advance.
Regards,
Srinivasan.

Dear Kulakarni,
I found few of my fields in 0FI_AP_4.I did n't find few fields can i enhance the Datasourse.
What is the respective Cube for that Datasourse.
I check 0AP_30,but in Business Content that cube is not available.
Could you please give me guidance.
Thanks in Advance,
Srinivasan.

No data source - OLE DB provider for ODBC is not shown in import and export wizard

Dear Sirs,
Would you please let me know how to activate the OLE DB provider for ODBC in import and export wizard?
Now I could use .NET framework for odbc only but it seems have problem in mapping table fields.
Please advise.
Thanks & Regards,
Clara

see this
http://msdn.microsoft.com/en-us/library/windows/desktop/ms712975(v=vs.85).aspx
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

ODBC Data source administrator hanging for 20 seconds

After installing 32 bit ODAC 11.2 Release 5 and Oracle Developer Tools for Visual Studio (11.2.0.3.20) our business is reporting slow Excel/VBA code using ODBC.
The business are querying using a ODBC System DSN. It works but hangs for 20 second when VBA releases the connection.
I can see that I get the same pause after testing the connection in the "ODBC Data Source administrator"
1. Open ODBC Data Source administrator
2. Edit the System DSN
3. Push "Test Conncetion". Says "Connection succesful". Push OK
4. Push "OK"
ODBC Data Source administrator now hangs for 20 seconds.
I did a clean installation on a Win7 x64 machine using 32 bit ODBC Data Source administrator
Nothing to find in the eventlog.
Does anyone know what could be wrong?

Udpate: I tracked it down to Microsoft ISA Firewall Client installation. If I uninstall the ISA Firewall the problem disappears.
Only disabling the ISA Firewall doesn't help!
Other have reported the same behaviour https://groups.google.com/forum/#!topic/microsoft.public.isa.clients/F14GNANHppA
Any help will be appreciated!
Thanks

An error occurred while loading the model for the item or data source 'EntityDataSource'.

Hi Team,
We are trying to configure the Power View in SharePoint 2013. We did the entire configuration by following below steps. When we open the excel workbook (2013) containing
Power View sheet (using excel web services) deployed in SharePoint Document library, we get the below error.
“An error occurred while loading the model for the item or data source
'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.”
Steps followed for configuring Power View in SharePoint Server 2013 (Single Machine setup):
Installed SharePoint Server 2013 Enterprise edition
Did not configure it at this time
Installed SQL Server 2012 with default instance installation (selected every features)
Later installed SP1 for SQL Server 2012
After that installed Analysis Server in SharePoint mode (SQL Server PowerPivot for SharePoint)
Again installed another Analysis Server and selected the tabular mode of data model
Then ran the configuration wizard of Share point 2013 for farm configuration (only for central admin creation)
Later we ran the PowerPivot for SharePoint 2013 (spPowerpivot.msi)
Then using the Power Pivot Configuration tool for 2013 and completed all the steps and configured the excel service and registered the above two analysis service instances.
Questions/Doubts are:
Is our steps followed as mentioned above is correct for configuring Power View in SharePoint Server 2013 Enterprise edition?
Is the SQL Server 2012 Enterprise edition with SP1 installed is sufficient to view Power View sheets in SharePoint 2013 or we need to use the SQL Server 2012 SP1
CTP3 software for Power View feature as mentioned in the below link.
http://technet.microsoft.com/en-us/library/jj219634.aspx
but we don’t have an option to download CTP3 software now from Microsoft site
Or do we need to install
Microsoft SQL Server 2012 With Power View For Multidimensional Models
CTP
http://www.microsoft.com/en-sg/download/details.aspx?id=35822
Few blogs says that SQL Server 2012 instance should have been installed with SP1 at one go (not seperately).
http://www.microsoft.com/en-in/download/details.aspx?id=35575
Error detail :
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message
xmlns="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access
the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3000.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access
the data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source>Microsoft.AnalysisServices.SPClient</Source><Message>We
cannot locate a server to load the workbook Data Model.</Message><MoreInformation><Source></Source><Message>We cannot locate a server to load the workbook Data Model.</Message><MoreInformation><Source>Microsoft.Office.Excel.Server.WebServices</Source><Message>We
cannot locate a server to load the workbook Data Model.</Message></MoreInformation></MoreInformation></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices"
/></detail>
Please help me in configuring Power View for SharePoint 2013.
Thanks in advance.
Pavan Kumar

I'll bet that I know the answer to this one - and you probably won't like it ;)
Here's the telling portion of that error: "We cannot locate a server to load the workbook Data Model."
This error is thrown in two scenarios; the first, when you haven't registered an analysis server. The second appears to be the issue you're having:
PowerPivot requires SQL Server 2012 SP1. Microsoft issued a release of SQL Server 2012 SP1 that really wasn't SP1...
Check the version of SQL that you are running. It should be version 11.0.3000 or greater. If it's not, you have the wrong "SP1" installed. The correct one is
here.
Here's the bad news- you can't simply redeploy the correct one... because the installer already thinks that SP1 is installed. You'll have to backup (or detach and copy) your databases, then re-install SQL with the correct SP1, then restore or reattach
the databases. Once you've done that, PowerPivot and PowerView will work properly.
I sincerely hope this resolves your issues - we wasted TWO WEEKS of our time with this problem!

Delta extraction for FI (AR & AP) data sources

I tried extracting the data from 2 standard SAP data sources under FI module for Accounts Receivable.
0FI_AR_10(Customer payment history via delta extraction)
0FI_AR_5 (customer payment history)
The data to be extracted into 0FIAR_C05(payment history) info cube.I assigned the 2 data sources to an info source and pumped the data into the cube via an ODS.Now the problem is with delta extraction.No records are picked in the delta extraction.So I checked in extractor checker RSA3 with delta update mode.I got the following error.
"Could not determine BW release of logical system"
Could some one resolve the issue?Thanks in advance.
Thanks & Regards
Vinay

Hi ,
Please go through 493422 note once . see if suits to your requirement follow it accordingly .
Thanks ,
Anil

Why is the Microsoft Office Access Database Engine data source looking for a workgroup information file?

While trying to import to MSSQL2012 from SSDT using the wizard from an Access 2013 DB (.accdb) which is password protected, I get the following error with the username blank and the password field correctly populated:
Cannot start your application. The workgroup information file is missing or opened exclusively by another user. (MicrosoftOffice Access Database Engine)
But according to this link:
http://office.microsoft.com/en-us/access-help/what-happened-to-user-level-security-HA010342116.aspx
MSA10 and beyond shouldn't need workgroup information files, although it's not clear to me if they are
created/used or not.
I can point the wizard to some local version of system.mdw at Advanced -> All -> Jet OLEDB:System Database, and then the error becomes:
Not a valid account name or password. (Microsoft Office Access Database Engine)
for any username I can think of.
Questions:
1. Why does this data source insist on looking for a workgroup information file even though user-level security should be disabled?
2. Why does the Open dialog box for the Microsoft Access Database Engine have *.mdb as the only selectable filetype?
3. How can I get around these errors for an .accdb that is password protected?
Thanks!

Hi JordanPG,
To connect to Access 2007 or later database, we need the Microsoft ACE 12.0 OLE DB driver. SQL Server only installs the Microsoft Jet 4.0 OLE DB driver which can be used to connect to Access 2003 or earlier database. Besides, the Microsoft Jet 4.0 OLE DB
driver only has 32-bit version, but the Microsoft ACE 12.0 OLE DB driver has both 32-bit and 64-bit version. However, the 32-bit and 64-bit Microsoft ACE 12.0 OLE DB drivers cannot be installed on a single server.
According to your description, you can use the 64-bit SQL Server Import and Export Wizard to load data from the Access database, so the 64-bit Microsoft ACE 12.0 OLE DB driver is installed on your computer. Since the BIDS/SSDT is a 32-bit application, the
64-bit Microsoft ACE 12.0 OLE DB Provider is not visible in BIDS/SSDT. So, when you said that you select “Microsoft Access (Microsoft Access Database Engine)" in the SQL Server Import and Export Wizard (it is actually the 32-bit version) started by the SSDT,
I think it should be “Microsoft Access (Microsoft Jet Database Engine)”. Because the Microsoft Jet 4.0 OLE DB driver only supports Access 2003 or earlier format, it threw the error “Test connection failed because of an error in initializing provider. Unrecognized
database format 'C:\myDB.accdb'”.
In this situation, you have two approaches to avoid this issue:
Launch the SQL Server Import and Export Wizard (64-bit), and select “Save SSIS Package” to “File System” on the “Save and Run Package” page. Then, the package will be saved to a specified directory. After that, you can add this existing package to a SSIS
project. The status of the corresponding OLE DB Connection Manager should be Work Offline, or the OLE DB Source will throw an error about 32-bit driver if the Connection Manager is not in Work Offline status, you can ignore that and the package can run successfully
in SSDT as long as the project is set to run in 64-bit runtime mode.
However, for the SSDT 2012 integrated with Visual Studio 2012, the 64-bit runtime mode is disabled. In this situation, to run the package in SSDT, you have to uninstall the 64-bit Microsoft ACE 12.0 OLE DB drivers and install the 32-bit one. Here is the
download link:
http://www.microsoft.com/en-in/download/details.aspx?id=13255
Regards,
Mike Yin
TechNet Community Support

Data source for ECMCT table

hi,
can some one tell me the data source we should use for extracting data from ECMCT table?
the potential data source we identified is 3EC_CS1A but there is no documentation available on this data source.
could you documentation provide us the supporting docs or note no?
thanks in advance!!!
NA

Hi Samir,
welcome on board !
Take a look here:
http://help.sap.com/saphelp_nw04/helpdata/en/6c/4d6637a04c2367e10000009b38f8cf/content.htm
Hope it helps!
(and please don't forget to reward the answers..it's a way to say thanks !)
Bye,
Roberto

Data source in R/3 for BW - 0UC_SALES_SIMU_01

Similar Messages

Maybe you are looking for