Data source not shown in active state after replicating from source system

Hi Gurus,
I have activated the datasou 0CO_PC_ACT_05 in R/3 system form RSA5 and replicated the same in BW system. After replication when i try to activate the datasource by instaling the business content.It is not getting installed.
The datasource is already present in the BW system in the modified version, do we need to install the business content to bring the datasource to active state.
Please help.

if its in 3.x then first you need to install business content info source(0CO_PC_ACT_05)
later you can assign your ecc data source to info source and source system. in this process transfer rules and communication structures will comes into picture.
you can use program to activate data source - RS_TRANSTRU_ACTIVATE_ALL
You want use in 3.x version only?
if you have 7.x version bw, better to go with 7.x data flow.

Similar Messages

Problem in activating datasource after replication from source system

Hi Experts,
After replication of data sources from source system ,I get all data sources inactive. I tried to make it active manually but every time I get
Syntax error in GP_ERR_RSAPTD1, row 27 (-> long text)
    Message no. RG102
Diagnosis
    Field "/BIC/CCZVBAK2031" is unknown. It is neither in one of the
    specified tables nor defi...
How do I go about solving this problem....Any advise please...

Hello,
You do not mention your source system release but can you execute the check report
described in the SAP note 493422 , if this does not resolve the problem can you goto
RSA1, right click on the relevant "source system" and choose the "restore" option,
then please try and replicate and activate the datasource again.
If you have BW release 7.0 please check that the note 929751is applied in your system
or that you are on a higher support package level.
If there is still a problem please le me know your BW Release and Support package level.
Best Regards,
Des

Vendor not found while creating SC after replicating from r/3 to srm

Hi all
I tried to replicate some vendors from r/3 to srm and when i used the t-code bbpgetvd i got a message that it has already been replicated but wheni am trying to create a Shopping Cart and assigning vendor to the cart it is giving me a message that no supplier is assign and no possible source of suply found in the system?PLS answer my question its urgent.

Hi Pooja,
I understand that you have moved your partner information from R/3 to SRM. In SRM, all the Partner(vendor) information is stored in BUT000 master table. The type of partner = 02.
Go to transaction BP in SRM and check for the partner data. If found, go to master table BUT000 and check there. If you dont find your data overthere track the msg flow.
Else you should be able to create the cart.
Regards,
Karthik Babu
Edited by: karthik babu pulluru on Jan 13, 2012 7:38 AM

All master data values not shown in query selections

Hi
I have created a query on a BasisCube containing the InfoObject 0FUNC_AREA. I loaded data to 0FUNC_AREA and the cube.
I then created a query on the cube, in which I want to filter on 0FUNC_AREA. However, when I get the list of available values for 0FUNC_AREA not all the values in the master data is shown. It only shows 25 values out of 105.
As a default, the data shown is only the cube data, so I removed the tick in the checkbox: Show only InfoCube data. Still the same.
Then I went to the InfoObject and set the 'Query Def. Filter Value Selection' and 'Query Execution Filter Val. Selectn' equal to 'Values in Master Data'. Still the same.
Then I deleted the contents of the InfoCube. It still shows the original 25 values.
The really strange thing is, that when I go into the selection screen for 0FUNC_AREA in the BEx and limit the shown values to one of the values available in the master data but not shown in the list, it shows the text of the functional area in the limit summary window. But still when executing the limitation, it cannot find the value!!!
The problem is the same in LISTCUBE
I hope some of you can help we with this.
Thanks
/Karsten

Hi Hari
1) Reactivated the master data, said it was already active.
2) Could see a difference between the data contained in cube and the remaining data. Otherwise not.
I deleted cube and master data and reloaded, the problem still persists. I am beginning to suspect a bug in BW.
I have to determine whether I am going to live with it (as it isn't critical, just a nuisance) or create an OSS on it.
Thanks for all the input guys.
/Karsten

Date is not shown in messages list

For many emails that I am receiving from different accounts, date is not shown in messages list, only time.
It looks like these messages were received today, in fact they are old.
Encountered this problem on 2 different PCs, 3 different mail accounts (gmail and own server).
What could be the reason and how to fix it?

The messages shown without date are not today's, they can be few days, months or even a year old...

No way to publish a workflow, I get this error: System.InvalidOperationException: Operation failed with error Microsoft.Workflow.Client.ScopeInactiveException: Scope ... is not in an active state. Its current state is 'Unregistering'

Hi,
I'm using Project Server 2013 and I'm not able to publish a workflow in SharePoint Designer 2013, I get this error:
System.InvalidOperationException: Operation failed with error Microsoft.Workflow.Client.ScopeInactiveException: Scope '/SharePoint/default/d7feb9ea-ccb2-4ec3-8f89-2a45b6cf3777' is not in an active state. Its current
state is 'Unregistering'. HTTP headers received from the server - ActivityId: c47ef567-8c54-4ae0-9a1a-1e4fb51320d8. NodeId: TestServer. Scope: /SharePoint/default/d7feb9ea-ccb2-4ec3-8f89-2a45b6cf3777. Client ActivityId : c6e5979c-20f8-e042-1f9d-2cb2a25d7f9e.
---> System.Net.WebExceptio
The thing is that I transferred the databases from a Prod.Env. to the Test Env. and from that moment on the Test Env. stopped working (only workflows), then I
was thinking that maybe the workflow is not working in the Test Environment because when I transferred the databases from Prod Env to Test Env I didn’t transfer the databases related to workflow, I only transferred:
WSS_Content
PWA_ServiceDB
But I didn’t transfer:
SBGatewayDatabase
SBManagementDB
SBMessageContainer01
WFInstanceManagementDB
WFManagementDB
WFResourceManagementDB
I didn’t transfer them because, before, when I transferred DB’s in version 2010, these DB’s were not needed, as the workflows were done using another method.
So, I tried to create a new workflow in the Test Env. but there is no way, I always get that error.
I've tried to Register again the workflow, and the result looks ok, but it doesn't solve the problem:
Register-SPWorkflowService
–SPSite "http://whatever/PWA"
–WorkflowHostUri "http://TestServer:12291"
–AllowOAuthHttp -Force
Do you know how to solve this issue or have an idea to give me some light?
Thank you for your help and regards,
José Espases

Looks like you haven't defined the WF scope or the site where you are trying to deploy the workflow to isn't included in the scope
Check this article
http://fangdahai.blogspot.in/2013/04/on-premise-windows-workflow-server.html
Thanks | epmXperts | http://epmxperts.wordpress.com

Camera app not shown on lock screen after iOS 5 upgrade

Camera app not shown on lock screen after ios 5 upgrade. Help!!

Push your home button twice at the lock screen.

Error while activating DSO after loading from another DSO..Production issue

Hello Gurus,
I got an error while activating DSO2 after loading from another DSO1.
DSO1 load and activation was sucessful but while loading from DSO1 to DSO2 load was fine but got error while activating...
>Error when assigning SID: Action VAL_SID_CONVERT table ZWEEK_NUM
>Value u201809u2019 of characteristic ZWEEK_NUM is not a number with 000004 spaces
this theard was posted after searching for related post in SDN.
and i tried Function Module RSODS_CHECK_RSODSACTUPDTYPE but it is not available .. but I used this in BW 3.10u2026..
is their any similar Function Module in BI 7.0 please advice.
We are using SAP NetWeaver BI 7.0
Release- 700 Service level- 017
Thanks in advance
Sandy

sloved the issue......
it was due to wrong data for the related field...
it must be "0009 "
Thanks for ur support. closing the ticket
Regards
Sandy

BUG: Sandisk USB flash drive in "half-mounted" state after wake from sleep

My Sandisk Cruzer Crossfire 4GB Flash Drive is left in a half-mounted state after wake from sleep. The Finder believes the drive is still mounted, the icon is on the Desktop. However opening a file on the drive, or trying to eject the drive, results in a long beach ball, followed by a message that I removed the drive without Ejecting it first. The same drive continues to work fine on my Tiger machine, and on PCs.
Bug Report:
Setup:
Macbook 1st Gen (2.0 Ghz)
Mac OS X Leopard 10.5 Clean Install
Sandisk Cruzer Crossfire 4GB USB Flash Drive (in either port)
Repro:
Plug in the drive.
Close the MacBook to put it to sleep
Reopen the MacBook
Result:
The lights on the flash drive never light back up after wake from sleep. Navigating the drive, or trying to eject it results in a "you removed the device without ejecting it first" message.
Expected:
Drive should still be mounted and accessible after waking back up.

It may be a design flaw in the device. Mac OS X does a lot more power management than most other OSes, including tearing devices down to little or no power during sleep. It is possible that the device simply misbehaves due to corrupted memory state or reports a substantially different GUID or something similarly bizarre upon wake. (Okay, that last one wouldn't technically be a power management issue....)
If it doesn't have any problems except when sleeping the system, I would just make sure I unmounted it before putting the machine to sleep and wouldn't worry about it. Maybe check with Sandisk to see if they have a firmware updater for the device.

How source data changing synchronize to destination after exp from source?

Stream creation, how the source data changing synchronize to the destination after exp data from source?
Time of Stream creation:
a. exp/imp
exp erpdev/erpdev owner=erpdevobject_consistent=y file=erpdev.dmp grants=y rows=y indexes=y statistics=none
imp erpdev/erpdev file=erpdev.dmp ignore=ycommit=y log=import.log streams_instantiation=y
b. confirming source and dest database SCN
BEGIN
DBMS_APPLY_ADM.SET_SCHEMA_INSTANTIATION_SCN(
SOURCE_SCHEMA_NAME=> 'erpdev',
source_database_name=> 'ERPDB',
instantiation_scn=> &iscn ,
recursive =>TRUE);
END;
c. 'START_APPLY' of dest database
EXEC DBMS_APPLY_ADM.START_APPLY('STRMADMIN_APPLY');
Question:
1.
Stream start to work at "c. START_APPLY of dest database", how the source data changing synchronize to the destination after exp data from source?
2.
What was "b. confirming source and dest database SCN" for？

You missed a step : the prepare table and its role. The prepare table for capture returns an SCN which will tells Streams at which SCN it must start capture any DML. At this stage the Apply may be configured or not, but if the source tables is modified, an LCR will be created when you start the capture and this LCR will be sent to the apply site when the apply site is finally up.
During the process of transfering the content of the Source site to target site there is always room for a desync to take place if the source site is active. Two cases exists and must be examined:
- Prepare table first, then export source --> any DML after the prepared SCN and before the start of the export will be sent as LCR while it is also into the export->> duplicate DML
- Export first then prepare table --> A DML occured AFTER the start of the export but before the SCN returned by the prepared SCN: this DML will be missing in the epxort (and at target site) and not yet captured neither since it occured before the prepare table.
So what is the best? The answer the first. You resolve the issue with the apply SCN which has into the export, for each table the SCN at the start of the export. In this scenario, you have prepared first, export next source, import in target and set the scn of each table i(at apply site) using the one found nto the export (hence the parameter STREAMS_INSTANTIATION ).
Now even all SCN captured on source after the prepared table but before the start of the export, will effectively be sent to apply site but will be IGNORED by the apply process has it would be a SCN aging before the start of the export. The SCN of the tables into the export file will become the SCN of the apply process. any SCN lower will be ignored by the apply process.
A last word in respect of a DML that started AFTER the start of the export and BEFORE the end of the export on source site (during the export). Since it is after the prepare table, it is captured and since it is after the start of the export, it is not into the export (we assume the export is consistent - which is not always true). So you need this LCR as the mutation it describes occured after the start of the export and is not in the export: everything is ok.
Having said that, still the best way to setup a target site is still to avoid any transction on source site during the setup.
I hope you understand this well for it is the way it works.

Ios 5.1: my calendar dates are not shown in the notification center

My calendar dates (from today and tomorrow) are not shown in the notification center. Under notifications I have activated the calendar app. What can Ido?

IOS / is no out for a couple of weeks and Apple seems to be reluctant to fix this problem. As a business device it becomes rediculous to be not able to see my calender entries anymore in the notification center. Is Apple now leaving the business arena and focusing on toys ?

Deactivation date is not updating in Asset Master after retirement (ABAON)

Dear Experts,
Asset Capitalized on: 28.02.2009 and depreciation key used as: LINK-Str.-line from acq.value to zero without interest. Asset Retirement done with revenue (210) on 31.05.2009. We do have depreciation like (01 book depreciation, 15 Tax depreciation, 30 Local GAAP book depreciation). Below is the asset and class:
Asset name: Maruti Baleno
Asset Class: Vehicles
Here my question is after retirement done with the transaction code: ABAON u201CDeactivation onu201D date is not updating automatically in the system, however when am trying to update manually the system showing error like u201CDeactivation not possible. Dep.area 15 has acquisition values.
When am trying to do same transaction with T code: u201CABAVNu201D, the system updating the deactivation date.
Can anybody explain me why the above error happening and why the deactivation date is not updating with t code: ABAON.
Thanks,
Francis.J

Dear Atif Farooq,
In the AO74 the transaction types (Deactivate fixed asset check box also ticked)
200 Retirement without revenue
210 Retirement with revenue
When am trying to update manually below error appearing in AS02
Deactivation not possible. Dep.area 15 has acquisition values
Message no. AA296
Diagnosis
You cannot deactivate, since acquisition values are still present in depreciation area 15.
Procedure
Deactivation can only be posted by a complete retirement/transfer. The deactivation date is then set automatically.
The above asset procured in the year of 2009 and same has been retired 2009.
Thanks,
Francis J

Horizontal Menus "corrupt" in active state after upgrade to V2

   Sorry to add to the grief, but I've got a problem with the horizontal menu bars too. The "Active" state renders the following in the "Active" state. The bar was created (and is 'live' from) version 1 and it worked perfectly in Muse's preview and in browsers. I haven't tried much to correct this myself (though I'll list what I have done below) but I'd like to get some suggestions before I dive in.
   This is what I've tried so far:
Made sure the bar was on the on the bottom in the 'Z' axis
Made sure the bar was on the top in the 'Z' axis
Checked that the bar wasn't over-lapped by or over-lapping any other object(s).
Checked each button to make sure all Active States looked right.
   I'm not exactly a 'webbie' so I'm extra cautious about proceeding, expecially since the site in question isn't mine and is pretty important to the person it belongs to. I think I might try to re-build the bar while I await an answer here.

Hi,
Could you send us your Muse file at [email protected] with a link to this post?
Thanks,
Abhishek

Most of the triggers in my composition are not showing there active state

I have a composition with 18 triggers.
Each trigger has a b/w image that should turn to a colour image when active or rolled over but only the two on the 3rd row work correctly.
The others do change when rolled over but when I roll off, even when still active they go back to their normal state.
Also when the composition plays through only the same two triggers will show the correct active state whilst active.
http://boastassociates08.businesscatalyst.com/projects.html
this happens in all methods of preview.
i have checked and all triggers have the correct images on each state.
Thanks

I figured it out. all trigger also have a link to another page on the site, all but two anyway.
so the triggers states are reacting as if it is just a link rather than it being a trigger in a composition.
does somebody know a way that will allow me to have the triggers states react the way i want and for the triggers to act as a link?

OPC Server Not going to active state

When we add a single virtual Analog input channel on a PXI 4351 card the opc sevrer cannot be started by the tag engine. The error message is that it cannot be set to the active state. Removing the single analog input channel solves the problem. We have 100 tags 6 of them are analog and the remainder digital i/o. Does anybody know how to get the opc server to accept the new channel?

When we add a single virtual Analog input channel on a PXI 4351 card the opc sevrer cannot be started by the tag engine. The error message is that it cannot be set to the active state. Removing the single analog input channel solves the problem. We have 100 tags 6 of them are analog and the remainder digital i/o. Does anybody know how to get the opc server to accept the new channel?

Data source not shown in active state after replicating from source system

Similar Messages

Maybe you are looking for