Data Transfer Port ranges in FTPS with SSL in File Adapter

Hi,
I would appreciate if you could give me pointers reagrding the below issue.
We are on XI 3.0.
For one interface, I have to configure the FTP File adapter to pick up the files from external server.
The connection is secure and should be FTPS with SSL.
I have the certificate from the 3rd party and have it installed on our XI development server.
The change has been made in our firewall to allow the connection to the host IP and port 21 which is configured at the target party as Explicit FTPS port and they have allowed access to our Server IP in their firewall.
I have configured other FTPS connections and they worked fine but this is the only one that has been giving me so much trouble.
The error i get today is:
Error occurred while connecting to the FTP server "60.234.48.106:21": java.net.SocketException: Connection reset
Yesterday, i got the below error:
Error occurred while connecting to the FTP server "60.234.48.106:21": iaik.security.ssl.SSLException: Server certificate rejected by ChainVerifier
The Vendor has suggested to get the firewall ports 21 and 28000:30000 (data transfer) to be opened.
He has also provided with the certificate passphrase additionally to the user name and password needed to make the connection.
When i tried the connection from the XI development to the vendor server, via the Telnet, it looked like it worked.
Please advice.
Regards,
Archana

>
Archana Singhai wrote:
> Hi,
> I would appreciate if you could give me pointers reagrding the below issue.
> We are on XI 3.0.
> For one interface, I have to configure the FTP File adapter to pick up the files from external server.
> The connection is secure and should be FTPS with SSL.
> I have the certificate from the 3rd party and have it installed on our XI development server.
> The change has been made in our firewall to allow the connection to the host IP and port 21 which is configured at the target party as Explicit FTPS port and they have allowed access to our Server IP in their firewall.
> I have configured other FTPS connections and they worked fine but this is the only one that has been giving me so much trouble.
> The error i get today is:
> Error occurred while connecting to the FTP server "60.234.48.106:21": java.net.SocketException: Connection reset
> Yesterday, i got the below error:
> Error occurred while connecting to the FTP server "60.234.48.106:21": iaik.security.ssl.SSLException: Server certificate rejected by ChainVerifier
> The Vendor has suggested to get the firewall ports 21 and 28000:30000 (data transfer) to be opened.
> He has also provided with the certificate passphrase additionally to the user name and password needed to make the connection.
> When i tried the connection from the XI development to the vendor server, via the Telnet, it looked like it worked.
> Please advice.
> Regards,
> Archana
1. Open the port ranges. FTPS usually requires you to open ports in the range of 65024 through 65535 for Passive FTP data
connections
2. Use the CA name in the certificate. it should be same as of the host name of the FTPS server

Similar Messages

  • The port range is overlapped with rule X message - SRP521W

    Hello,
    I am having trouble adding a NAT port forwarding rule on my SRP521W. I get the error
    The port range is overlapped with rule X, even though my port ranges are not overlapping.
    I have this rule created (rule 2):
    and am trying to create this rule:
    I get this error
    It seems to be related to the fact that both internal ports are 80, but this should not matter as the internal IP addresses are different. Can someone please explain how I should create rules to allow me to open ports to two different devices, with different IPs, using port 80?
    Many thanks

    Oh wow!  That is an extremely old release.
    I would certainly recommend upgrading straight away.
    Latest release is 1.1.27 and is available via www.cisco.com/go/srp500 - follow the download software link on the right hand side.
    When selecting code, follow the link for SRP520 Models (not SRP520-U)
    You should find that the latest code fixes your issue (and provides more functionality).
    Regards,
    Andy

  • I was just copying my data from stand by phone by using phone to phone data transfer but phone also locked with i cloud login of stand by phone what to do

    i was just copying my data from stand by phone by using phone to phone data transfer but phone also locked with i cloud login of stand by phone what to do

    If it's a hardware problem, then the phone will need to be replaced.
    There is no magic that can fix a hardware problem.

  • Data Transfer using LSMW IDOC processing with multiple segments

    we need to post the document data (Header structure, BP item structure, G/L item structure..etc) using LSMW IDOC processing.
    is it possible to transfer data for all these structures (Segments) in single file?

    Thanks for the reply.
    I am assuming when we are specifying the file in LSMW we are going to give the option to generate the file with include all structures.
    could you please elaborate further is there any thing specific we need to do while configuring LSMW to get the file for all segments in the IDOC with field names which we are going to populate with data, so that we can use it for data transfer.
    any help document will  be helpful.

  • Dynamic FTP Directory Address in File Adapter - is this possible?

    We have a customer who would like us to pick up a file via an FTP file adapter once per day. The problem is, they have a different directory each day containing the file. The directory name is of the form YYYY-MM-DD. The name of the file in the directory is always the same.
    Is it possible to dynamically calculate the Source Directory name in the FTP file adapter? If so, how?
    Kind Regards,
    Tony.

    >
    Dharamveer Gaur wrote:
    > Hi
    > Look this same thread:
    > Re: Dynamic folder name (when reading file in file adapter)
    Hi,
    All the examples I have seen are to configure the Receiver File Adapter, not the Sender File Adapter. I don't thinl I have seen one blog yet whereby the source directory of a Sender File Adapter has been dynamically configured. I wonder if it can be done because the sender file adapter does not have Variable Substitution possibilities for filenames and directories.
    So has anybody a link to a blog where this dynamic choice of a source directory has been done for a SENDER file adapter?
    BR,
    Tony.

  • Problem With Receiver Communication (File Adapter)

    Hi,
    My SAP XI Version is 3.0 with Service Pack 7,I have a strange problem,
    I have a flat file coming from Unix system,I need to convert this into  XML and put a copy in the Archive mode and send the XML file,getting it converted into flat file format send it to the receiver.Here I have to do the content Conversion,So,I have done content conversion while configuring Sender and Receiver Communication Channel.
    I am using NFS as Transport Proctocol.So, everthing was fine when i run the scenario,after activating.The Sender communication Channel is Archiving the files.But I am unable to see any file with receiver communication channel.
    So,for this I have checked up with Adapter monitoring in Runtime Workbench. In my File Adapter My Sender as well as Receiver Communication Channels are in Green.They are mentioning that Sender Communction is sucessful and
    RECEIVER COMMUNICATION IS Sucessful but no messages processed.
    Can any one suggest what to do now.Everything is fine with Content conversion and Unix System.But my receiver is not receiving any messages.
    Should any OSS notice or patch work needs to be applied.
    Thank You,
    KishoreJ.

    Hi Kishore,
    I Guess you should first see if the file is being picked......for that do the following.
    While configuring your Sender File Adapter, let the mode be DELETE. This way, we will know if the file is being picked by the File adapter. The file will be deleted and you can be sure that it has been picked up.
    Next, look into the RWB--> FILE ADAPTER and see the log of the file adapter
    and also, you can see the flow of your message in the integration engine in SXMB_MONI.
    Ans still if your message is not showing up in SXMB_MONI, please do as explained below.
    Increase logging and trace level in:
    SXMB_ADM -> Integration Engine Configuration -> Specific Configuration
    Also create entries as follows in it:
    LOGGING = 1
    LOGGING_SYNC = 1
    TRACE_LEVEL = 3
    TRACE_LEVEL_PROPAGATION = 1
    Also refer XI: I cannot see some of my messages in the SXMB_MONI
    Regards,
    Abhy

  • Can we process files with attachments using File Adapter

    Hi All,
    I want to process files which have attachments using File Adapter.
    Is it possible to process such files?
    May be using standard modules?
    Regards,
    CBKLP

    Assuming you are talking about sender FILE channel....you can make use of PayloadSwapbean provided by SAP (standard module)...to read data from attachment.
    Regards,
    Abhishek.

  • Problem with SP 15 (File-Adapter etc.)

    Hallo,
    has anybody face to problems with sp 15? It may be a problem with the file-adapter. Whats yours experiences with sp 15?
    Thanks in advance,
    Frank

    Hi Frank,
    I am not sure about the issues with SP15, but Michal's Frequently Asked Questions blog talks about what to do if your adapters are not shown after an upgrade to some SP. Just check it out,
    /people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
    Question 3 under Adapters,
    I can't see my adapters in the adater monitoring after the import of a new SP
    a) try reimporting "SAP Basis software component"
    b) take a look at the XI installation guide on how to do it: "Importing the XI Content for Software Component Version SAP Basis 6.40"
    Regards,
    Bhavesh

  • Excel data transfer into SAP internal table with GUI_UPLOAD

    hi all,
      i m using SRM4 system and i wanted to develop one report which will upload data from excel and convert it into IT.
    i know that many threads are posted on this topic.
    but my requirement is slight different. in the system only one function module is available that is "GUI_UPLOAD" and we want that user shd not save file as tab delimited before calling this fm. instead, program shd take care of all these things...
    please suggest something asap..
    helpful ans will be rewarded..
    thanks,
    jigs.

    Dear Jigs,
    Please go though the following lines of code:
    D A T A D E C L A R A T I O N *
    TABLES: ANEP,
    BKPF.
    TYPES: BEGIN OF TY_TABDATA,
    MANDT LIKE SY-MANDT, " Client
    ZSLNUM LIKE ZSHIFTDEPN-ZSLNUM, " Serial Number
    ZASSET LIKE ZSHIFTDEPN-ZASSET, " Original asset that was transferred
    ZYEAR LIKE ZSHIFTDEPN-ZYEAR, " Fiscal Year
    ZPERIOD LIKE ZSHIFTDEPN-ZPERIOD, " Fiscal Period
    ZSHIFT1 LIKE ZSHIFTDEPN-ZSHIFT1, " Shift No. 1
    ZSHIFT2 LIKE ZSHIFTDEPN-ZSHIFT1, " Shift No. 2
    ZSHIFT3 LIKE ZSHIFTDEPN-ZSHIFT1, " Shift No. 3
    END OF TY_TABDATA.
    Declaration of the Internal Table with Header Line comprising of the uploaded data.
    DATA: BEGIN OF IT_FILE_UPLOAD OCCURS 0.
    INCLUDE STRUCTURE ALSMEX_TABLINE. " Rows for Table with Excel Data
    DATA: END OF IT_FILE_UPLOAD.
    S E L E C T I O N - S C R E E N *
    SELECTION-SCREEN: BEGIN OF BLOCK B1 WITH FRAME,
    BEGIN OF BLOCK B2 WITH FRAME.
    PARAMETERS: P_FNAME LIKE RLGRAP-FILENAME OBLIGATORY.
    SELECTION-SCREEN: END OF BLOCK B2,
    END OF BLOCK B1.
    E V E N T : AT S E L E C T I O N - S C R E E N *
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FNAME.
    CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
    EXPORTING
    PROGRAM_NAME = SYST-REPID
    DYNPRO_NUMBER = SYST-DYNNR
    FIELD_NAME = ' '
    STATIC = 'X'
    MASK = '.'
    CHANGING
    FILE_NAME = P_FNAME
    EXCEPTIONS
    MASK_TOO_LONG = 1
    OTHERS = 2
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    E V E N T : S T A R T - O F - S E L E C T I O N *
    START-OF-SELECTION.
    Upload Excel file into Internal Table.
    PERFORM UPLOAD_EXCEL_FILE.
    Organize the uploaded data into another Internal Table.
    PERFORM ORGANIZE_UPLOADED_DATA.
    E V E N T : E N D - O F - S E L E C T I O N *
    END-OF-SELECTION.
    *& Form UPLOAD_EXCEL_FILE
    text
    --> p1 text
    <-- p2 text
    FORM UPLOAD_EXCEL_FILE .
    CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
    EXPORTING
    FILENAME = P_FNAME
    I_BEGIN_COL = 1
    I_BEGIN_ROW = 3
    I_END_COL = 7
    I_END_ROW = 32000
    TABLES
    INTERN = IT_FILE_UPLOAD
    EXCEPTIONS
    INCONSISTENT_PARAMETERS = 1
    UPLOAD_OLE = 2
    OTHERS = 3
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    ENDFORM. " UPLOAD_EXCEL_FILE
    *& Form ORGANIZE_UPLOADED_DATA
    text
    --> p1 text
    <-- p2 text
    FORM ORGANIZE_UPLOADED_DATA .
    SORT IT_FILE_UPLOAD BY ROW
    COL.
    LOOP AT IT_FILE_UPLOAD.
    CASE IT_FILE_UPLOAD-COL.
    WHEN 1.
    WA_TABDATA-ZSLNUM = IT_FILE_UPLOAD-VALUE.
    WHEN 2.
    WA_TABDATA-ZASSET = IT_FILE_UPLOAD-VALUE.
    WHEN 3.
    WA_TABDATA-ZYEAR = IT_FILE_UPLOAD-VALUE.
    WHEN 4.
    WA_TABDATA-ZPERIOD = IT_FILE_UPLOAD-VALUE.
    WHEN 5.
    WA_TABDATA-ZSHIFT1 = IT_FILE_UPLOAD-VALUE.
    WHEN 6.
    WA_TABDATA-ZSHIFT2 = IT_FILE_UPLOAD-VALUE.
    WHEN 7.
    WA_TABDATA-ZSHIFT3 = IT_FILE_UPLOAD-VALUE.
    ENDCASE.
    AT END OF ROW.
    WA_TABDATA-MANDT = SY-MANDT.
    APPEND WA_TABDATA TO IT_TABDATA.
    CLEAR: WA_TABDATA.
    ENDAT.
    ENDLOOP.
    ENDFORM. " ORGANIZE_UPLOADED_DATA
    In the subroutine --> ORGANIZE_UPLOADED_DATA, data are organized as per the structure declared above.
    Regards,
    Abir
    Don't forget to award points *

  • Data transfer to sap R/3 with no standard IDoc

    Hi all,
    I have a situation where i need to transfer data to and fro between SAP R/3 system and an Oracle database.
    The data getting transfered is HR data.
    For this transfer there is no suitable standard IDOC which can be used.
    In this situation what should be our approach?
    Pls guide as soon as possible, since its a bit urgent.
    Thanks in advance.
    Regards
    Neetu

    Hi Neetu,
    If  sap WAB AS is >= 6.20 then u can use Abap Proxies(SPROXY) in SAP instead of calling IDOC...
    Check this link
    D:\helpdata\EN\86\58cd3b11571962e10000000a11402f\content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/ab/585f3c482a7331e10000000a114084/content.htm
    and weblog..
    /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
    Regards,
    Sridhar
    Message was edited by: sridhar reddy kondam

  • Java Client FTP with ssl and fxp

    Hy, I make java ftp client that supports ssl and fxp. I found for ssl something but nothing for fxp. Do you have any information for me regarding java and fxp?
    Best regards

    is this going over the internet, a private connection. a vpn over the internet? are there any logs that show any ftp error codes? if there is a firewall in play, does it show any logs on this connection?

  • FTP with SSL cert on ACNS via WCCP

    I have a client using an SSL cert to connect to an ftp server. The user is being redirected to a CE-511 via WCCP v2 but the FTP connection does not work. If I bypass the user (in my wccp acl) it works fine - following a default route to my PIX.
    Any info, good or bad will be greatly appreciated.
    - Matt

    What is the software version running on the CE-511. Did you try upgrading to the latest version of the firmware. This should solve the issue.

  • Data transfer from SQLDB to SAP R/3 without JDBC adapter

    Hi Experts,
    Please suggest the possible methods of transferring data from SQLDB to SAP R/3 without using a JDBC adapter at sender side.
    Regards,
    Kalyan

    Hi KKC242 ,
    Please suggest the possible methods of transferring data from SQLDB to SAP R/3 without using a JDBC adapter at sender side.
    > Data links can work..but not recommended..and that too will be with out using PI.
    any way we hav eto connect to the database...even without adapter..by using a OLEDB/JDBC connector...in VB.. an dsend it across to PI
    Regards ,

  • Extracting Data from Essbase using ODI fails with: Cannot calculate file.

    I'm try to Extract Data from Essbase using ODI KM (LKM Hyperion Essbase DATA to SQL). I'm using
    CalcScript for EXRACTION_QUERY_TYPE. CalcScript in my case resides on Essbase App directory, so I
    just specify the name (i.e. FULLEXP) for EXTRACTION_QUERY_FILE. Before creating ODI interface
    I ran CalcScript successfully from EAS. Also, ODI and Essbase are on different servers. ODI Agent
    is not running on Essbase Server, but ODI Agent has access to file generated by CalcScript.
    EPM Fusion Version 11.1.2.2. Essbase running in LINUX and ODI 11g running on Windows Server.
    Created the ODI interface where source is my Planning Cube and target is a relational table using SYNOPSIS
    MEMORY Engine for staging area. I make it thru the following ODI interface steps OK:
    1 - Loading - SrcSet0 - Drop work table
    2 - Loading - SrcSet0 - Create work table
    3 - Loading - SrcSet0 - Begin Essbase Data Extract.
    I then fail at:
    4 - Loading - SrcSet0 - Extract Data
    I get the following Message in ODI Operators console.
    org.apache.bsf.BSFException: exception from Jython:
    Traceback (most recent call last):
    File "<string>", line 1, in <module>
         at com.hyperion.odi.essbase.ODIEssbaseDataReader.getAppData(Unknown Source)
         at com.hyperion.odi.essbase.AbstractEssbaseReader.extract(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
    com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1013131): Failed to start Asynchronous thread
         at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
         at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:346)
         at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2458)
         at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:48)
         at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
         at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
         at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
         at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
         at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
         at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:83)
         at java.lang.Thread.run(Thread.java:662)

    I'm try to Extract Data from Essbase using ODI KM (LKM Hyperion Essbase DATA to SQL). I'm using
    CalcScript for EXRACTION_QUERY_TYPE. CalcScript in my case resides on Essbase App directory, so I
    just specify the name (i.e. FULLEXP) for EXTRACTION_QUERY_FILE. Before creating ODI interface
    I ran CalcScript successfully from EAS. Also, ODI and Essbase are on different servers. ODI Agent
    is not running on Essbase Server, but ODI Agent has access to file generated by CalcScript.
    EPM Fusion Version 11.1.2.2. Essbase running in LINUX and ODI 11g running on Windows Server.
    Created the ODI interface where source is my Planning Cube and target is a relational table using SYNOPSIS
    MEMORY Engine for staging area. I make it thru the following ODI interface steps OK:
    1 - Loading - SrcSet0 - Drop work table
    2 - Loading - SrcSet0 - Create work table
    3 - Loading - SrcSet0 - Begin Essbase Data Extract.
    I then fail at:
    4 - Loading - SrcSet0 - Extract Data
    I get the following Message in ODI Operators console.
    org.apache.bsf.BSFException: exception from Jython:
    Traceback (most recent call last):
    File "<string>", line 1, in <module>
         at com.hyperion.odi.essbase.ODIEssbaseDataReader.getAppData(Unknown Source)
         at com.hyperion.odi.essbase.AbstractEssbaseReader.extract(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
    com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1013131): Failed to start Asynchronous thread
         at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
         at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:346)
         at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2458)
         at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:48)
         at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
         at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
         at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
         at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
         at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
         at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:83)
         at java.lang.Thread.run(Thread.java:662)

  • [SOLVED] Wince Exception 'Data Abort' (0x4) for gwes.dll with ROM based file system??

    Hello friends,
    Previously, I was using RAM and ROM based file system and my device was booting correctly. Now, I made only one change related to ROM based file system. When I selected this ROM based file system and try to boot the device.... I got the exception and the
    logs are ---- 
    3321 PID:400002 TID:410002 SetOpp: choosing AM335X_REV_ES2_1
    3321 PID:400002 TID:410002 SetOpp to 3
    3331 PID:400002 TID:590002 OALIoCtlHalInitRTC: Initializing RTC
    3331 PID:400002 TID:590002 RTC_SetTime() = 2006.01.01 12:00:00.000
    3480 PID:400002 TID:930006 ECC TYPE is BCH 8 bit
    3481 PID:400002 TID:930006 8Bit NAND device
    4835 PID:400002 TID:930006 CM3: input file [\windows\firmware.bin] is 9932 bytes long
    4837 PID:400002 TID:930006 CM3: firmware file read ok!
    5037 PID:400002 TID:930006 SDHC: CPU revision 0xffffffff
    5181 PID:400002 TID:930006 UCD_INIT: g_Dc.pUsb0Regs->MODE_R = 0x80
    5185 PID:400002 TID:930006 CAM3xxOTG::Init DEVCTL 80
    5391 PID:400002 TID:930006 UsbPowerModule: 2 DEVCTL = 0x00000081
    5664 PID:400002 TID:2df001e Exception 'Data Abort' (0x4): Thread-Id=02df001e(pth=9e451cc8), Proc-Id=00400002(pprc=8219f5e0) 'NK.EXE', VM-active=04510006(pprc=9e4658c0) 'GweUser.exe'
    5664 PID:400002 TID:2df001e PC=efd918b8(gwes.dll+0x000118b8) RA=efd918b8(gwes.dll+0x000118b8) SP=ab5ff960, BVA=00000024
    1529482 PID:400002 TID:2df001e Exception 'Data Abort' (0x4): Thread-Id=02df001e(pth=9e451cc8), Proc-Id=00400002(pprc=8219f5e0) 'NK.EXE', VM-active=04510006(pprc=9e4658c0) 'GweUser.exe'
    1529483 PID:400002 TID:2df001e PC=efd918b8(gwes.dll+0x000118b8) RA=efd918b8(gwes.dll+0x000118b8) SP=ab5ff960, BVA=00000024
    PB Debugger The Kernel Debugger has been disconnected successfully.
    After giving calibration inputs, I go the above exception and the LCD screen becomes white only... But i only changed the file system from RAM & ROM based file system to ROM based file system....
    As, I am trying to find the solution but up to now I am unable to find the solution. I request to provide the appropriate inputs???? 

    Hello Friends,
    After using the filter as an environment variable in the .bat file still the issue is not solved.. I can only see the Windows Embedded Compact 7 logo without any icon and toolbar??????
    My platform .reg files entries are as -
    ;; Load Device Manager to start storage driver
    #if (defined SYSGEN_FSROMONLY)
    [HKEY_LOCAL_MACHINE\init\BootVars]
    "Start DevMgr"=dword:1
    ;; Block driver settings to load at boot phase
    [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\]
    "Profile"="FlashDisk"
    "Flags"=dword:1000
    ;; How to use storage space
    [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\FlashDisk]
    "AutoMount"=dword:1
    "AutoPart"=dword:1
    "AutoFormat"=dword:1
    "PartitionDriver"="mspart.dll"
    "MountAsBootable"=dword:1
    "Name"="NANDFLASH"
    "Folder"="NANDFLASH"
    "DefaultFileSystem"="FATFS"
    ;; Making storage device as a root
    [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\FlashDisk\FATFS]
    "MountAsRoot"=dword:1
    "MountAsBootable"=dword:1
    "MountPermanent"=dword:1
    "AutoPart"=dword:1
    "AutoFormat"=dword:1
    [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\FlashDisk\FATFS\Filters\fsreplxfilt]
    "dll"="fsreplxfilt.dll"
    "order"=dword:1 ; must be loaded before other filters
    #endif
    ;===============================================================================
    and .bat file entries are as -
    set SYSGEN_FSREPLXFILT=1
    set PRJ_ENABLE_FSEXTREPL=1
    set PRJ_ENABLE_FSMOUNTASROOT=1
    Where I am missing some thing please tell me???????

Maybe you are looking for