[SOLVED] Wince Exception 'Data Abort' (0x4) for gwes.dll with ROM based file system??
Hello friends,
Previously, I was using RAM and ROM based file system and my device was booting correctly. Now, I made only one change related to ROM based file system. When I selected this ROM based file system and try to boot the device.... I got the exception and the
logs are ----
3321 PID:400002 TID:410002 SetOpp: choosing AM335X_REV_ES2_1
3321 PID:400002 TID:410002 SetOpp to 3
3331 PID:400002 TID:590002 OALIoCtlHalInitRTC: Initializing RTC
3331 PID:400002 TID:590002 RTC_SetTime() = 2006.01.01 12:00:00.000
3480 PID:400002 TID:930006 ECC TYPE is BCH 8 bit
3481 PID:400002 TID:930006 8Bit NAND device
4835 PID:400002 TID:930006 CM3: input file [\windows\firmware.bin] is 9932 bytes long
4837 PID:400002 TID:930006 CM3: firmware file read ok!
5037 PID:400002 TID:930006 SDHC: CPU revision 0xffffffff
5181 PID:400002 TID:930006 UCD_INIT: g_Dc.pUsb0Regs->MODE_R = 0x80
5185 PID:400002 TID:930006 CAM3xxOTG::Init DEVCTL 80
5391 PID:400002 TID:930006 UsbPowerModule: 2 DEVCTL = 0x00000081
5664 PID:400002 TID:2df001e Exception 'Data Abort' (0x4): Thread-Id=02df001e(pth=9e451cc8), Proc-Id=00400002(pprc=8219f5e0) 'NK.EXE', VM-active=04510006(pprc=9e4658c0) 'GweUser.exe'
5664 PID:400002 TID:2df001e PC=efd918b8(gwes.dll+0x000118b8) RA=efd918b8(gwes.dll+0x000118b8) SP=ab5ff960, BVA=00000024
1529482 PID:400002 TID:2df001e Exception 'Data Abort' (0x4): Thread-Id=02df001e(pth=9e451cc8), Proc-Id=00400002(pprc=8219f5e0) 'NK.EXE', VM-active=04510006(pprc=9e4658c0) 'GweUser.exe'
1529483 PID:400002 TID:2df001e PC=efd918b8(gwes.dll+0x000118b8) RA=efd918b8(gwes.dll+0x000118b8) SP=ab5ff960, BVA=00000024
PB Debugger The Kernel Debugger has been disconnected successfully.
After giving calibration inputs, I go the above exception and the LCD screen becomes white only... But i only changed the file system from RAM & ROM based file system to ROM based file system....
As, I am trying to find the solution but up to now I am unable to find the solution. I request to provide the appropriate inputs????
Hello Friends,
After using the filter as an environment variable in the .bat file still the issue is not solved.. I can only see the Windows Embedded Compact 7 logo without any icon and toolbar??????
My platform .reg files entries are as -
;; Load Device Manager to start storage driver
#if (defined SYSGEN_FSROMONLY)
[HKEY_LOCAL_MACHINE\init\BootVars]
"Start DevMgr"=dword:1
;; Block driver settings to load at boot phase
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\]
"Profile"="FlashDisk"
"Flags"=dword:1000
;; How to use storage space
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\FlashDisk]
"AutoMount"=dword:1
"AutoPart"=dword:1
"AutoFormat"=dword:1
"PartitionDriver"="mspart.dll"
"MountAsBootable"=dword:1
"Name"="NANDFLASH"
"Folder"="NANDFLASH"
"DefaultFileSystem"="FATFS"
;; Making storage device as a root
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\FlashDisk\FATFS]
"MountAsRoot"=dword:1
"MountAsBootable"=dword:1
"MountPermanent"=dword:1
"AutoPart"=dword:1
"AutoFormat"=dword:1
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\FlashDisk\FATFS\Filters\fsreplxfilt]
"dll"="fsreplxfilt.dll"
"order"=dword:1 ; must be loaded before other filters
#endif
;===============================================================================
and .bat file entries are as -
set SYSGEN_FSREPLXFILT=1
set PRJ_ENABLE_FSEXTREPL=1
set PRJ_ENABLE_FSMOUNTASROOT=1
Where I am missing some thing please tell me???????
Similar Messages
-
Years of data gone, backup DMG won't mount "No mountable file systems"
Could someone help me here, I have this problem.
The reason for this was that I ran into some complications with my boot camp windows install and wanted to start over. After returning the boot camp FAT partition space to Mac OS X it froze while attempting to create a new boot camp partition. "Boot Camp Assistant" suggested I backup my "Macintosh HD" and re-partition my HD because "some files could not be moved." Ok so, I backed-up my "Macintosh HD" volume to a DMG using Disk Utility selecting the volume and clicking new image icon, it is compressed, it is Leopard. I then booted with Leopard install DVD and began the restore process. Everything was working smoothly until the progress bar stopped animating, waited awhile and forced restart. When I restarted my internal HD had only an "Applications" folder which ended its contents with a half copied iDVD.app preceded by 73 other apps successfully restored. Now worst of all my Backup DMG produces the "No mountable file systems" error. Help, oh please help!
hdiutil imageinfo produces this:
Format: UDRW
Backing Store Information:
Name: Macintosh HD.dmg
URL: file://localhost/Volumes/Macintosh%20HD/Macintosh%20HD.dmg
Class Name: CBSDBackingStore
Format Description: raw read/write
Checksum Type: none
partitions:
appendable: false
partition-scheme: none
block-size: 512
burnable: false
partitions:
0:
partition-length: 92073985
partition-synthesized: true
partition-hint: unknown partition
partition-name: whole disk
partition-start: 0
Properties:
Partitioned: false
Software License Agreement: false
Compressed: no
Kernel Compatible: true
Encrypted: false
Checksummed: false
Checksum Value:
Size Information:
Total Bytes: 47141880320
Compressed Bytes: 47141880320
Total Non-Empty Bytes: 47141880320
Sector Count: 92073985
Total Empty Bytes: 0
Compressed Ratio: 1
Class Name: CRawDiskImage
Segments:
0: /Volumes/Macintosh HD/Macintosh HD.dmg
Resize limits (per hdiutil resize -limits):
92073985 92073985 92073985
Message was edited by: Marcus SOk, here is the output. It shows there is a problem with the resource fork XML, just like yours Shad Guy. If only their were some specs available I could try to fix it myself. An Apple engineer could most likely fix this in 20 min.
Also, thanks for your help man, having people tell me to give up is the worst.
hdiutil udifxmldet
"Macintosh HD.dmg" has 1365301792551680312 bytes of embedded XML data.
hdiutil: udifxmldet: unable to read XML data at offset 2841561349885781055 from "Macintosh HD.dmg": 29 (Illegal seek).
hdiutil: udifxmldet failed - Illegal seek
hdiutil udifderez
hdiutil: udifderez: could not get resource fork of "Macintosh HD.dmg": Function not implemented (78)
hdiutil: udifderez failed - Function not implemented
------------------------ -
Best Practice for Distributed TREX NFS vs cluster file systems
Hi,
We are planning to implement a distributed TREX, using RedHat on X64, but we are wondering which could be the best practice or approach to configure the "file server" used on the TREX distributed environment. The guides mention file server, that seems to be another server connected to a SAN exporting or sharing the file systems required to be mounted in all the TREX systems (Master, Backup and Slaves), but we know that the BI accelerator uses OCFS2 (cluster file systems) to access the storage, in the case of RedHat we have GFS or even OCFS.
Basically we would like to know which is the best practice and how other companies are doing it, for a TREX distributed environment using either network file systems or cluster file systems.
Thanks in advance,
ZarehI would like to add one more thing, in my previous comment I assumed that it is possible to use cluster file system on TREX because BI accelerator, but maybe that is not supported, it does not seem to be clear on the TREX guides.
That should be the initial question:
Aare cluster file system solutions supported on plain TREX implementation?
Thanks again,
Zareh -
Convert Raw Device to file system based file systems for datafiles [HP-UX]
Hello experts,
Once again in seek of guidance..
I am in the process of migrating my database (Oracle 7.2.3 on HP-UX 10.20 to Oracle 8.1.7 64-bits on HP-UX 11).
Amongst one of our steps is to convert our RAW Device datafiles to File System based files within the same server and version - Oracle 7.2.3 on HP-UX 10.20.
E.g. /dev/vg00/rlvol1 to become /d01/oradata/cmtdb/tbs1.dbf
Is this something possible?
Can i just do the following:
a. Shutdown database (normal)
b. dd if=/dev/vg00/rlvol1 of=/d01/oradata/cmtdb/tbs1.dbf bs=20k
c. chown oracle7:dba /d01/oradata/cmtdb/tbs1.dbf
d. svrmgrl> startup mount
e. alter database rename file '/dev/vg00/rlvol1' to '/d01/oradata/cmtdb/tbs1.dbf'
f. alter database open.
Thanks very much for your replies.
Please tell me about possible problems that i can anticipate.
Best Regards
YogeerajHello experts,
Once again in seek of guidance..
I am in the process of migrating my database (Oracle 7.2.3 on HP-UX 10.20 to Oracle 8.1.7 64-bits on HP-UX 11).
Amongst one of our steps is to convert our RAW Device datafiles to File System based files within the same server and version - Oracle 7.2.3 on HP-UX 10.20.
E.g. /dev/vg00/rlvol1 to become /d01/oradata/cmtdb/tbs1.dbf
Is this something possible?
Can i just do the following:
a. Shutdown database (normal)
b. dd if=/dev/vg00/rlvol1 of=/d01/oradata/cmtdb/tbs1.dbf bs=20k
c. chown oracle7:dba /d01/oradata/cmtdb/tbs1.dbf
d. svrmgrl> startup mount
e. alter database rename file '/dev/vg00/rlvol1' to '/d01/oradata/cmtdb/tbs1.dbf'
f. alter database open.
Thanks very much for your replies.
Please tell me about possible problems that i can anticipate.
Best Regards
Yogeeraj -
Is Elements 6 for Mac compatible with new Lion operating system?
I'm planning to buy a new iMac with OS X Lion. Will the Photoshop Elements 6 for Mac program that I am currently using be compatible with the Lion operating system?
Adobe's official response about any software and any major operating system update is that since the software wasn't tested on the new OS, they don't consider it compatible. Just as they never update the system requirements to show updated versions of the compatible OS. They just don't go there at all. If you called them they would say no, but not based on experience or experiment, merely on policy.
I don't think there's anything especially complicated--based on what I hear in real life, people who don't have Open in Rosetta turned on when they upgrade to lion are mostly okay, while there's no way to make it go if you did have it set for Rosetta. I would guess a new install would be fine, but I haven't had a chance to try it out myself yet. Scanning and such are likely to have problems, and of course older ppc plug-ins won't work anymore. -
We have the following devices
*9411
*9215
We
are trying to Trigger an acquisation on 9215 on every Rising and
Falling edge picked up by 9411.The 9411 Picks up pulses from an
encoder which works at 180PPR.So when we have rising and falling edges
per channel we will have 180*2 that is 360 count.Can this be achieved
if so How can this be done in VB6 or C.
All the best
Message Edited by Parikshit on 02-21-2008 11:01 PMHi,
Please do not cross-post the same question in different forums: a lot people consider that rude Internet etiquette. We'll continue in this thread:
Solve this it's a challenge
http://forums.ni.com/ni/board/message?board.id=70&message.id=8224
Joe Friedchicken
NI VirtualBench Application Software
Get with your fellow hardware users :: [ NI's VirtualBench User Group ]
Get with your fellow OS users :: [ NI's Linux User Group ] [ NI's OS X User Group ]
Get with your fellow developers :: [ NI's DAQmx Base User Group ] [ NI's DDK User Group ]
Senior Software Engineer :: Multifunction Instruments Applications Group
Software Engineer :: Measurements RLP Group (until Mar 2014)
Applications Engineer :: High Speed Product Group (until Sep 2008) -
Using two separate Chase Visas, Apple Oay is working fine but the transaction list is very generic. It lists time, date, city, state and two dashes where amount should be. Shouldn't it at least show the name of the store and the amount?
Hi. I don't know if this will help, but I had this problem too. Mine quit working after I used earbuds. I was told that there is a switch inside the earbud port that tells the device to divert sound to earbuds. This can get "stuck" and the device keeps thinking the earbuds are plugged in. After reinserting the earbuds a few times, the switch was released and my speakers started working again.
I'm not a techie.... this is just what I found to work after my iPhone 4S speakers quit. -
Extracting Data from Essbase using ODI fails with: Cannot calculate file.
I'm try to Extract Data from Essbase using ODI KM (LKM Hyperion Essbase DATA to SQL). I'm using
CalcScript for EXRACTION_QUERY_TYPE. CalcScript in my case resides on Essbase App directory, so I
just specify the name (i.e. FULLEXP) for EXTRACTION_QUERY_FILE. Before creating ODI interface
I ran CalcScript successfully from EAS. Also, ODI and Essbase are on different servers. ODI Agent
is not running on Essbase Server, but ODI Agent has access to file generated by CalcScript.
EPM Fusion Version 11.1.2.2. Essbase running in LINUX and ODI 11g running on Windows Server.
Created the ODI interface where source is my Planning Cube and target is a relational table using SYNOPSIS
MEMORY Engine for staging area. I make it thru the following ODI interface steps OK:
1 - Loading - SrcSet0 - Drop work table
2 - Loading - SrcSet0 - Create work table
3 - Loading - SrcSet0 - Begin Essbase Data Extract.
I then fail at:
4 - Loading - SrcSet0 - Extract Data
I get the following Message in ODI Operators console.
org.apache.bsf.BSFException: exception from Jython:
Traceback (most recent call last):
File "<string>", line 1, in <module>
at com.hyperion.odi.essbase.ODIEssbaseDataReader.getAppData(Unknown Source)
at com.hyperion.odi.essbase.AbstractEssbaseReader.extract(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1013131): Failed to start Asynchronous thread
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:346)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2458)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:48)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:83)
at java.lang.Thread.run(Thread.java:662)I'm try to Extract Data from Essbase using ODI KM (LKM Hyperion Essbase DATA to SQL). I'm using
CalcScript for EXRACTION_QUERY_TYPE. CalcScript in my case resides on Essbase App directory, so I
just specify the name (i.e. FULLEXP) for EXTRACTION_QUERY_FILE. Before creating ODI interface
I ran CalcScript successfully from EAS. Also, ODI and Essbase are on different servers. ODI Agent
is not running on Essbase Server, but ODI Agent has access to file generated by CalcScript.
EPM Fusion Version 11.1.2.2. Essbase running in LINUX and ODI 11g running on Windows Server.
Created the ODI interface where source is my Planning Cube and target is a relational table using SYNOPSIS
MEMORY Engine for staging area. I make it thru the following ODI interface steps OK:
1 - Loading - SrcSet0 - Drop work table
2 - Loading - SrcSet0 - Create work table
3 - Loading - SrcSet0 - Begin Essbase Data Extract.
I then fail at:
4 - Loading - SrcSet0 - Extract Data
I get the following Message in ODI Operators console.
org.apache.bsf.BSFException: exception from Jython:
Traceback (most recent call last):
File "<string>", line 1, in <module>
at com.hyperion.odi.essbase.ODIEssbaseDataReader.getAppData(Unknown Source)
at com.hyperion.odi.essbase.AbstractEssbaseReader.extract(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Cannot calculate file. Essbase Error(1013131): Failed to start Asynchronous thread
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:346)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2458)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:48)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:83)
at java.lang.Thread.run(Thread.java:662) -
Step-by-Step Guide for connecting CRM with SAP R/3 system Server
Hi Experts,
For my ongoing project , I am in the need of connecting the CRM server with
SD server.
Can u share any Step- By Step guide for doing that.
I know that the RFC connection has to be established between the system.
Logical system must be create and all such stuffs.
It is definitly helpful, If u can help me out.
I would to thank, appreciate and reward for your help
Best Regards,
ManiprabuHi Mani,
Follow the following steps :
1. Create RFC destination for both the systems on CRM and R/3 in SM59.
2. Create the logical systems and assign clients to logical system in SALE transaction both on CRM and R/3.
3. Create a user in the R/3 table CRMCONSUM with the name CRM.
4. Maintain the Middlware Parameter tables on CRM : Table SMOFPARSFA:
Create an entry for following parameter entry:
Key - R3A_COMMON
Para name - CRM_DEFAULT_DESTINATION
Value - R/3 logical system
5. Maintain the parameter tables on R/3 system : CRMRFCPAR, CRMPAROLTP
CRMRFCPAR :
Create new entry with following data:
User - CRM
Object name - *
RFC Destination - RFC destination for CRM
Load types - All Load Types
In Queue flag - X
Send XML No XML
CRMPAROLTP :
Create the following parameter entry:
Para name - CRM_DEFAULT_DESTINATION
User - CRM
Value - Name of the CRM logical system
6. Create Sites and attach subscriptions in Admin Console : Tcode SMOEAC
Create a Site as CRM and another as R/3. Attach the required subscriptions to the R/3 site.
7. Register the queues in SMQR and SMQS transactions.
PS : For detailed steps refer the Middlware Base Customizings(CR500 and CR100)
<b>Reward points if it helps.</b> -
Data Transfer Port ranges in FTPS with SSL in File Adapter
Hi,
I would appreciate if you could give me pointers reagrding the below issue.
We are on XI 3.0.
For one interface, I have to configure the FTP File adapter to pick up the files from external server.
The connection is secure and should be FTPS with SSL.
I have the certificate from the 3rd party and have it installed on our XI development server.
The change has been made in our firewall to allow the connection to the host IP and port 21 which is configured at the target party as Explicit FTPS port and they have allowed access to our Server IP in their firewall.
I have configured other FTPS connections and they worked fine but this is the only one that has been giving me so much trouble.
The error i get today is:
Error occurred while connecting to the FTP server "60.234.48.106:21": java.net.SocketException: Connection reset
Yesterday, i got the below error:
Error occurred while connecting to the FTP server "60.234.48.106:21": iaik.security.ssl.SSLException: Server certificate rejected by ChainVerifier
The Vendor has suggested to get the firewall ports 21 and 28000:30000 (data transfer) to be opened.
He has also provided with the certificate passphrase additionally to the user name and password needed to make the connection.
When i tried the connection from the XI development to the vendor server, via the Telnet, it looked like it worked.
Please advice.
Regards,
Archana>
Archana Singhai wrote:
> Hi,
> I would appreciate if you could give me pointers reagrding the below issue.
> We are on XI 3.0.
> For one interface, I have to configure the FTP File adapter to pick up the files from external server.
> The connection is secure and should be FTPS with SSL.
> I have the certificate from the 3rd party and have it installed on our XI development server.
> The change has been made in our firewall to allow the connection to the host IP and port 21 which is configured at the target party as Explicit FTPS port and they have allowed access to our Server IP in their firewall.
> I have configured other FTPS connections and they worked fine but this is the only one that has been giving me so much trouble.
> The error i get today is:
> Error occurred while connecting to the FTP server "60.234.48.106:21": java.net.SocketException: Connection reset
> Yesterday, i got the below error:
> Error occurred while connecting to the FTP server "60.234.48.106:21": iaik.security.ssl.SSLException: Server certificate rejected by ChainVerifier
> The Vendor has suggested to get the firewall ports 21 and 28000:30000 (data transfer) to be opened.
> He has also provided with the certificate passphrase additionally to the user name and password needed to make the connection.
> When i tried the connection from the XI development to the vendor server, via the Telnet, it looked like it worked.
> Please advice.
> Regards,
> Archana
1. Open the port ranges. FTPS usually requires you to open ports in the range of 65024 through 65535 for Passive FTP data
connections
2. Use the CA name in the certificate. it should be same as of the host name of the FTPS server -
Help with partitions and file systems [SOLVED]
Hi, i have been using Ubuntu for a while, and now i want to move to Arch. I've probed it in a PC and i like so i want to make que change.
But, before installing Arch, I have 2 doubts. I red the beginners guide and also the instalation guide. There it says that if better to have diferents partitions for /, /boot/, /home, /usr, /var, y /tmp
Usually, i alwayes used something like this:
* /boot (32megas)
* /swap (512 megas)
* /root (6 a 8 gigas)
* /home (80 gigas aprox)
It's really better to also have partitions for /var, /usr y /tmp? o some of them? and, in that case, wich size should i give them? because i don't want to make them too small, but i don't want to waste disk space neither.
Adn that takes me to my second question, wich filesystem is better for each partitionn? in many places, i read taht JFS its good for /var or that XFS if better for /home and big files
I thinked to use something like this:
* /boot (ext2)
* / (JFS)
* swap
* /home (XFS)
Is a good design? or should i use other filesystem like reiserfs, etc... and for /var, /usr and /tmp partition, wich one should i use?
Thank you
Ps: This Pc is gonna be a desktop pc
Ps2: sorry for my bad english. it is not my real lenguage
Reason of edit: added the swap partition. I forgot it
Last edited by Thalskarth (2008-12-21 20:11:00)thanks everybody for the help,
kaola_linux wrote:@Thalskarth - it's better to have /var especially if you're using ext3 or other filesystems which was designed for larger files as your partition for /home and /. Having a seperate partition for /var would be nice (backup purposes and reinstalling without downloading the entire package whole over again). 5gb would be sufficient for your /var, anyway you can always resize it to your needs.
so, a 5gb partition in reiserfs would be OK for a /var
Inxsible wrote:
Lot of people also use XFS which is known to have better performance with huge files. I think EXT3 offers a good balance...because I am never sure whether my home partition will have all huge files or not..same with my external drive...so i just use EXT3
If you have a specific partition for movies or some video/audio editing that you do..you may wanna consider XFS too. I don't do all that...so I have never used XFS. I wouldn't know the exact performance difference between ext3 and XFS.
Yes, in many places i red that XFS is better for big files. But i couldn't fine wich is the meaning of "big file". Does it mean a 200 mg file? or a 4.4gb one??
the same applies to reiserFs, what is a small file? a 1mg one or a 4kb one?
I have alwayes used ext3, i thinked in XFS and JFS just to give them a try.
amranu wrote:I have no idea about better filesystems, all my partitions are ext3 (soon to be ext4)
Inxsible wrote:One thing that makes me wanna keep EXT3 is that EXT4 is coming out (soon?) and you can upgrade from 3 to 4 without having to reformat and having to make backups of your current data.
really is cominf soon? i didn't think in ext4 beacuse many places said that was in development for many years... meybe they were a bit out-of-date
Edit: i search in the wiki and it says that since 11 october 2008, ext4 is "stable" and is been included since kernel 2.6.28 as stable realase, is to early to prove it? or it better to wait a while??
thanks.
and, does anyone try the JFS one?
Last edited by Thalskarth (2008-12-03 00:14:56) -
I need an Internet driver for Yoga 13 with Windows 7 operating system
I downgrade my yoga 13 operating system from Windows 8 to Windows 7 because it has a confliction with my software that I need to use. After that, I cannot connect it to Internet. Does anyone know the driver that I can use for this circumstance please? I also have some unknow devices listed on the Device Manager such as SM Bus Controller, PCI Data Acquisition and Signal Proceussing Controller, USB Controller, etc.
Hello,
From looking at the Yoga 13 Hardware Maintenance Manual and downloading the driver package from the Realtek Wireless LAN & Bluetooth Driver for Microsoft Windows 8 (64-bit) - IdeaPad Yoga 13 page and extracting (but not running) it to look at the contents, it appears the Yoga 13 uses a wireless LAN card based on Realtek RTL8732 chipset.
I would suggest that you try downloading the drivers, expanding, but not installing them on to a USB flash drive or SD card, then plugging that into the Yoga 13, running the Device Manager (filename: DEVMGMT.MSC), clicking on the appropriate entry for the wireless network adapter, selecting update, and then choosing the Browse my computer for driver software option, pointing that to the location of the unpacked drivers. Perhaps Device Manager will find the correct drivers to install that way.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество -
Documentation for tab.user_data with event based jobs
Hi,
Are all the atributes for tab.user_data when used as part of an event based job documented somewhere?
I have been looking but all I can find are examples rather than explicit documentation.
Thanks
PeteHi Pete,
The type of the object tab.user_data is the type used to create the AQ queue with. So it varies depending on the type you used to create the queue with.
If you are consuming messages from the scheduler event queue, the type is sys.scheduler$_event_info and to figure out what fields it has you can use
desc sys.scheduler$_event_info
Hope this helps,
Ravi. -
Hi,
I have implemented NDIS_SetGPRSContextActivated function in the RIL but when i start the radiometric test, there is an error. please analyze the log and see if you can help me in anyway. Thanks
99542 PID:400002 TID:3ba0006 RILProxy : R : GETEQUIPMENTSTATE - ID: 16, Result: OK
99542 PID:400002 TID:3ba0006 RILProxy : r : GETEQUIPMENTSTATE - To \Windows\nk.exe - Info Pointer = 0xcd78fd28, Param = 0xc4873bc0
99543 PID:400002 TID:3ba0006 RILProxy : R : GETEQUIPMENTSTATE - RADIOSUPPORT_ON, EQSTATE_FULL, Ready State = INITIALIZED | SIM | SIM_PB | SMS | UNLOCKED
99548 PID:400002 TID:4080002 RILDrv: chnl=[0] Accumulated response: +CSMS: 1,1,1,1<cr><lf>
99552 PID:400002 TID:4080002 RILDrv: chnl=[0] Accumulated response: +CSMS: 1,1,1,1<cr><lf>+CPMS: "SM",2,50,"SM",2,50,"SM",2,50<cr><lf>
99552 PID:400002 TID:4080002 RILDrv: chnl=[0] Accumulated response: +CSMS: 1,1,1,1<cr><lf>+CPMS: "SM",2,50,"SM",2,50,"SM",2,50<cr><lf>0<cr>
99553 PID:400002 TID:4060002 RILDrv: chnl=[0] Sending cmd: AT+CSCA?<cr>
99553 PID:400002 TID:57a00e2 IN function RIL_IOControl : API : [3000014]
99554 PID:150001a TID:57a00e2 RILProxy : R : GETMSGSERVICEOPTIONS - ID: 17, Result: OK
99554 PID:150001a TID:57a00e2 RILProxy : r : GETMSGSERVICEOPTIONS - To \Windows\udevice.exe - Info Pointer = 0x0028fd20, Param = 0x00250de4
99555 PID:150001a TID:57a00e2 RILProxy : R : GETMSGSERVICEOPTIONS - MSGSVCTYPE_PHASE2PLUS, Message Classes = BROADCAST | INCOMING | OUTGOING, ReadLocation = 2, ReadUsed = 2, ReadTotal = 50, WriteLocation = 2, WriteUsed = 2, Write
99555 PID:150001a TID:57a00e2 RILProxy : R : GETMSGSERVICEOPTIONS - StoreTotal = 50
99555 PID:150001a TID:55100de RILProxy : c : SETMSGSERVICEOPTIONS - From \Windows\udevice.exe
99555 PID:400002 TID:55100de IN function RIL_IOControl : API : [30000f8]
99556 PID:150001a TID:55100de RILProxy : C : SETMSGSERVICEOPTIONS - ID: 20, ReadLocation = 2, WriteLocation = 2
99563 PID:400002 TID:4080002 RILDrv: chnl=[0] Accumulated response: +CSCA: "+923189244444",145<cr><lf>
99563 PID:400002 TID:4080002 RILDrv: chnl=[0] Accumulated response: +CSCA: "+923189244444",145<cr><lf>0<cr>
99564 PID:400002 TID:4060002 RILDrv: chnl=[0] Sending cmd: AT+CGACT=1,1<cr>
99564 PID:400002 TID:580052 IN function RIL_IOControl : API : [3000014]
99565 PID:400002 TID:580052 IN function RIL_IOControl : API : [3000014]
99565 PID:150001a TID:580052 RILProxy : R : GETMSGCONFIG - ID: 18, Result: OK
99565 PID:150001a TID:580052 RILProxy : r : GETMSGCONFIG - To \Windows\udevice.exe - Info Pointer = 0x002522c0, Param = 0x00036af0
99566 PID:150001a TID:580052 RILProxy : R : GETMSGCONFIG - ADDRESS: ADDRTYPE_INTERNATIONAL, NUMPLAN_TELEPHONE, "923189244444"
99566 PID:150001a TID:8d0052 RILProxy : c : GETCELLBROADCASTMSGCONFIG - From \Windows\udevice.exe
99566 PID:400002 TID:8d0052 IN function RIL_IOControl : API : [3000228]
99566 PID:150001a TID:8d0052 RILProxy : C : GETCBMSGCONFIG - ID: 21
102236 PID:400002 TID:4080002 RILDrv: chnl=[0] Accumulated response: 0<cr>
102236 PID:400002 TID:4080002 RILDrv: chnl=[0] Accumulated response: +CGEV: ME PDN ACT 1<cr><lf>
102236 PID:400002 TID:4060002 RILDrv: chnl=[0] Sending cmd: AT+CRSM=178,28613,1,4,14<cr>
102237 PID:400002 TID:3ba0006 IN function RIL_IOControl : API : [3000014]
102237 PID:400002 TID:3ba0006 RILProxy : R : NDIS_SETGPRSCONTEXTACTIVATED - ID: 19, Result: OK
102237 PID:400002 TID:3ba0006 RILProxy : r : NDIS_SETGPRSCONTEXTACTIVATED - To \Windows\nk.exe - Info Pointer = 0x00000000, Param = 0xc4873bc0
102237 PID:400002 TID:3ba0006 Exception 'Data Abort' (0x4): Thread-Id=03ba0006(pth=c085b560), Proc-Id=00400002(pprc=8425e5e0) 'NK.EXE', VM-active=007e0006(pprc=c080ee44) 'shell.exe'
102237 PID:400002 TID:3ba0006 PC=ef1264fc(wwan.dll+0x000064fc) RA=00000000(???+0x00000000) SP=cd78fc64, BVA=00000004
113243 PID:400002 TID:4080002 RILDrv: chnl=[0] Accumulated response: +CGEV: ME PDN ACT 1<cr><lf>+CRSM: 144,0,"FFFFFFFFFFFFFFFFFFFFFFFFFFFF"<cr><lf>
113247 PID:400002 TID:4080002 RILDrv: chnl=[0] Accumulated response: +CGEV: ME PDN ACT 1<cr><lf>+CRSM: 144,0,"FFFFFFFFFFFFFFFFFFFFFFFFFFFF"<cr><lf>0<cr>
119084 PID:400002 TID:4080002 RILDrv: chnl=[0] Accumulated response: +CIEV: 2,4<cr><lf>
127121 PID:400002 TID:f80006 kernel PVRSRV_IOCTL_POWER_SET setting state 1
133248 PID:400002 TID:4060002 RILDrv: chnl=[0] Sending cmd: <cr>AT<cr>
133256 PID:400002 TID:4080002 RILDrv: chnl=[0] Accumulated response: 0<cr>
133256 PID:400002 TID:4060002 RILDrv: chnl=[0] Sending cmd: AT+CPMS="SM","SM","SM"<cr>
133278 PID:400002 TID:4080002 RILDrv: chnl=[0] Accumulated response: +CPMS: 2,50,2,50,2,50<cr><lf>
133279 PID:400002 TID:4080002 RILDrv: chnl=[0] Accumulated response: +CPMS: 2,50,2,50,2,50<cr><lf>0<cr>
133279 PID:400002 TID:d7002a IN function RIL_IOControl : API : [3000014]
133279 PID:400002 TID:4060002 RILDrv: chnl=[0] Sending cmd: AT+CSCB?<cr>
133279 PID:400002 TID:580052 IN function RIL_IOControl : API : [3000014]
133279 PID:150001a TID:580052 RILProxy : n : MSGSTORAGECHANGED - To \Windows\udevice.exe - Info Pointer = 0x0012fd20, Param = 0x00036af0
133280 PID:150001a TID:580052 RILProxy : N : MSGSTORAGECHANGED - MSGLOC_SIM, MSGLOC_SIM, MSGLOC_SIM
133280 PID:400002 TID:57a00e2 IN function RIL_IOControl : API : [3000014]
133280 PID:150001a TID:57a00e2 RILProxy : n : MSGSTORAGECHANGED - To \Windows\udevice.exe - Info Pointer = 0x0028fd20, Param = 0x00250de4
133280 PID:150001a TID:57a00e2 RILProxy : N : MSGSTORAGECHANGED - MSGLOC_SIM, MSGLOC_SIM, MSGLOC_SIM1. There are generators around that claim to generate suitable wrappers, given some dll input. I suggest you search google. Try JACE, jni, wrapper, generator, .... Also, serach back through this forum, where there have been suggestions made.
2. In general, you will need to supply wrappers, and if you want to use data from the "C side" in java, then you will need java objects that hold the data. -
Data Recovery Software for MBP
Apparently I have trashed the directory on my FW 160GB Maxtor External drive. "Unable to read disk". (It is a drag since it happened just as I was getting my brand new MBP system up! Oh well!)
My research has not uncovered a suitable disk repair/data recovery solution for the new iMac (Intel-based). Does anybody know of one? The best one?Other than Disk Utility (Utilities folder) there are two commercial products: TechTool Pro 4.5.2 (www.micromat.com) and Drive Genius 1.5.1 (www.prosofteng.com.)
Try DU, it's pretty good unless the directory is too badly trashed to be repaired.
For data recovery there's Data Rescue II (www.prosofteng.com) and File Salvage (www.subrosasoft.com.)
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.
Maybe you are looking for
-
How can i airplay from my mac connected through ethernet to an aple tv 2 on wifi
Hi everyone.. im having troubles using Airplay on my mac.. i connect my mac to the internet and home network using an ethernet connection to my router (non apple branded router) .. my apple tv 2 is connected to my home wifi network from the same rou
-
Iphone 3gs powers off/shuts off automatically/randomly when using various apps.
Did update recently (about 2-3 weeks ago) and have been experiencing problems with phone automatically shutting down/off in the middle of various apps. I-phone says operating system is Version 4.3.5 (8L1). This random power-off has happened in Safa
-
Sccm 2012 r2 error setup cannot compile mof file tasksequenceprovider.mof
Am getting this error during SCCM 2012 R2 installation on the same server which has SQL 2012 with SP1. "setup cannot compile mof file tasksequenceprovider.mof". Any help?
-
Contacts will not import vcard/.vcf file
I upgraded to Mountain Lion when it first came out. I am now trying to import a .vcf file into Contacts and it keeps telling me "no importable cards found." However, if I go to iCloud and try to import that same card, it imports just fine. Seems that
-
Infopackage insert in process chain does not work
Hi, We upgrade a system in support package 13 (we are in veresion 7) and since this upgrade i can not add an infopackage in process chains. When i try to insert an "execute infopackage" process, i click on the list of infopackage available and the sy