Java Client FTP with ssl and fxp

Hy, I make java ftp client that supports ssl and fxp. I found for ssl something but nothing for fxp. Do you have any information for me regarding java and fxp?
Best regards

is this going over the internet, a private connection. a vpn over the internet? are there any logs that show any ftp error codes? if there is a firewall in play, does it show any logs on this connection?

Similar Messages

JDBC Thin Connections with SSL and client certificates

Hi ,
we are going have a look at JDBC Thin Connections with SSL and client certificates.
I have two questions:
1. Is it possible to use SSL connections from JDBC Thin Driver and which release of the driver introduced it
2. Is it possible to use client certificates with JDBC Thin Driver and which release of the driver introduced it
Thanks for your help
regards
Markus Reichert

I could not reproduce the error after appending the SSL certificate to the certdb.txt file available under $Jinitiator_Home/lib/security folder.
Steps to add the SSL Certificate:
1. Run the form with the https mode in the IE Browser.
2. Security Alert is raised.
3. Click on the View Certificate button.
4. In the Certificate Window, click on the Details tab.
5. Click on the Copy to File button to copy the certificate.
6. Copy the certificate and append to the certdb.txt file.

Data Transfer Port ranges in FTPS with SSL in File Adapter

Hi,
I would appreciate if you could give me pointers reagrding the below issue.
We are on XI 3.0.
For one interface, I have to configure the FTP File adapter to pick up the files from external server.
The connection is secure and should be FTPS with SSL.
I have the certificate from the 3rd party and have it installed on our XI development server.
The change has been made in our firewall to allow the connection to the host IP and port 21 which is configured at the target party as Explicit FTPS port and they have allowed access to our Server IP in their firewall.
I have configured other FTPS connections and they worked fine but this is the only one that has been giving me so much trouble.
The error i get today is:
Error occurred while connecting to the FTP server "60.234.48.106:21": java.net.SocketException: Connection reset
Yesterday, i got the below error:
Error occurred while connecting to the FTP server "60.234.48.106:21": iaik.security.ssl.SSLException: Server certificate rejected by ChainVerifier
The Vendor has suggested to get the firewall ports 21 and 28000:30000 (data transfer) to be opened.
He has also provided with the certificate passphrase additionally to the user name and password needed to make the connection.
When i tried the connection from the XI development to the vendor server, via the Telnet, it looked like it worked.
Please advice.
Regards,
Archana

>
Archana Singhai wrote:
> Hi,
> I would appreciate if you could give me pointers reagrding the below issue.
> We are on XI 3.0.
> For one interface, I have to configure the FTP File adapter to pick up the files from external server.
> The connection is secure and should be FTPS with SSL.
> I have the certificate from the 3rd party and have it installed on our XI development server.
> The change has been made in our firewall to allow the connection to the host IP and port 21 which is configured at the target party as Explicit FTPS port and they have allowed access to our Server IP in their firewall.
> I have configured other FTPS connections and they worked fine but this is the only one that has been giving me so much trouble.
> The error i get today is:
> Error occurred while connecting to the FTP server "60.234.48.106:21": java.net.SocketException: Connection reset
> Yesterday, i got the below error:
> Error occurred while connecting to the FTP server "60.234.48.106:21": iaik.security.ssl.SSLException: Server certificate rejected by ChainVerifier
> The Vendor has suggested to get the firewall ports 21 and 28000:30000 (data transfer) to be opened.
> He has also provided with the certificate passphrase additionally to the user name and password needed to make the connection.
> When i tried the connection from the XI development to the vendor server, via the Telnet, it looked like it worked.
> Please advice.
> Regards,
> Archana
1. Open the port ranges. FTPS usually requires you to open ports in the range of 65024 through 65535 for Passive FTP data
connections
2. Use the CA name in the certificate. it should be same as of the host name of the FTPS server

I can't set up gmail in my iPad 2. Keep on saying ' can't connect with SSL and ask me whether to connect without using SSL, then I press 'yes' and it said again IMAP is not working and tell me to see network connection and incoming mail server.

I can't set up gmail in my iPad 2. Keep on saying ' can't connect with SSL and ask me whether to connect without using SSL, then I press 'yes' and it said again IMAP is not working and tell me to see network connection and incoming mail server. No idea how to do anymore. Already tried to figure out. But not work. Can anyone pls help me?

Nope, doesn't pass verification. I get the spinner for a minute or so, then the alert about setting it up without SSL. Are you suggesting I disable Fetch and Push BEFORE I enter the account details? Because I never get past the account details screen, unless I choose "Set up without SSL" after the warning.

Differences between client copy with sap_all and database copy

What's the difference between client copy with sap_all and doing a database copy.
I know if I do a database copy from Production to our Quality system.
I need to install the license key
restore the production library to the quality library
Initialize TMS and so on.
I know if I want to copy to our Development system. I would need to run either a remote client copy or and export/import since I cannot do a database copy because I would loose all my other clients in Development.
My question is, if the quality systems and the production systems are on the same support packs, same kernel.
What does a database copy give you (besides being faser) that a remote client copy or export/import of a client copy does.
Any differences
Thanks
Joe

Hello Joe,
If there is inconsistent Z tables between QAS and PRD, remote client copy could fail, especially when the table on PRD has longer length or more fields than the one on QAS.
Also the source client should has no-activity during the client copy, otherwise the application data could be inconsistent. For example, some material documents are copied, but not the corresponding financial documents. (For PRD client, it could be hours between the times those tables are copied.) For database restore, it is rarely an issue.
Best regards,
Victor

Business Connector problem with SSL and Web Services

Hi,
I have generated a Web Connector Service and tested this in our DEV and QA environment with http and no credentials.
All is fine.
I now switched to SSL and was provided with an https WSDL by our Web Server developers. The Web Connector service generates fine however as soon as I execute the service I get a NumberFormatException. Exact error is:
java.io.IOException:java.lang.NumberFormatException: null
The error occurs in pub.client:http
I traced through the working (in QA) and non-workinfg versions and checked the pipeline prior to the call and can see no different apart from the difference in protocol.
Does anyone have any idea what the cause is? I cannot determine what value is null.
Thanks
Brian

Hi,
I have generated a Web Connector Service and tested this in our DEV and QA environment with http and no credentials.
All is fine.
I now switched to SSL and was provided with an https WSDL by our Web Server developers. The Web Connector service generates fine however as soon as I execute the service I get a NumberFormatException. Exact error is:
java.io.IOException:java.lang.NumberFormatException: null
The error occurs in pub.client:http
I traced through the working (in QA) and non-workinfg versions and checked the pipeline prior to the call and can see no different apart from the difference in protocol.
Does anyone have any idea what the cause is? I cannot determine what value is null.
Thanks
Brian

How do I bind to directory server with SSL and authentication?

I'm running Lion Server 10.7.3, Open Directory master. In Open Directory/Settings/LDAP, I've checked the box to Enable SSL and selected a (self-signed) certificate. In Policies/Binding, I've checked the box to Enable Authenticated Directory Binding.
Testing with a client computer on which Snow Leopard has been freshly installed and fully updated, I went to System Prefs/Accounts to bind to the new directory server. The good news is, the binding was successful, and when the client initiates an AFP connection with the server, it uses Kerberos, creating a ticket as expected. (Which doesn't work with Lion clients, alas, but that's a seperate matter.)
Here are the problems:
1) It looks like the binding did not use SSL. By which I mean that when I opened Directory Utility and examined the LDAPv3 entry, the SSL checkbox was not checked. (If I then check the box, everything looks fine until I restart the client, after which I have a red dot. So I'm guessing that checking the box does nothing until after restart, and that it breaks the binding.)
2) I was never prompted to authenticate for the directory binding.
So I get that literally I'm *enabling* SSL and Authenticated Directory Binding, but it seems like the defaults are to bind without SSL or authentication, and there's no obvious-to-me way to force the binding to use those things. How do I do that?
What I'd really like to do is *require* SSL and Authenticated Directory Binding. I want this because my belief (correct me if I'm wrong) is that if authentication is required to bind to the server, no one will be able to bind to my server without my permission, and that SSL offers a more secure connection to my server than not-SSL. How do I require these things, or do I not really want to?
Thank you.

You cannot connect to databases via Muse at the moment. Please refer: http://forums.adobe.com/message/5090145#5090145
Cheers,
Vikas

OEL ldap client setup with SSL against OID using either ldaps or starttls

Hi, I've got OID 11.1.1.1.0 running with SSL enabled on port 3132. It's running in mode 2, SSL Server Authentication mode (orclsslauthentication is set to 32). I'd like to setup my OEL 5.3 and Solaris 10 ldap clients to connect to OID using SSL for user authentication. I have everything already working on the non-SSL port (3060), but I need to switch over to SSL. So far I can't get it to work on either OEL or Solaris. Does anyone out there know how to configure the client to use SSL?
Here's my /etc/ldap.conf file on OEL 5.3.
timelimit 120
bind_timelimit 120
idle_timelimit 3600
nss_initgroups_ignoreusers root,ldap,named,avahi,haldaemon,dbus,radvd,tomcat,radiusd,news,mailman,nscd,gdm
URI ldaps://FQDN:3132/
port 3132
ssl yes
host FQDN
base dc=DOMAIN,dc=com
pam_password clear
tls_cacertdir /etc/oracle-certs
tls_cacertfile /etc/oracle-certs/oid-test-ca.pem
tls_ciphers SSLv3
# filter to AND with uid=%s
pam_filter objectclass=posixaccount
#The search scope
scope sub
I have /etc/nsswitch.conf set to check for files first, then ldap
passwd: files ldap
shadow: files ldap
group: files ldap
Here's my /etc/openldap/ldap.conf file
URI ldaps://FQDN:3132/
BASE dc=DOMAIN,dc=com
TLS_CACERT /etc/openldap/cacerts/oid-test-ca.pem
TLS_CACERTDIR /etc/openldap/cacerts
TLS_REQCERT allow
TLS_CIPHERS SSLv3
The oid-test-ca.pem is a self-signed cert from the OID server. I also have the hash file configured.
4224de9f.0 -> oid-test-ca.pem
I can run ldapsearch using ldaps and it works fine.
ldapsearch -v -d 1 -x -H ldaps://FQDN:3132 -b "dc=DOMAIN,dc=com" -D "cn=user,cn=users,dc=DOMAIN,dc=com" -w somepass -s sub objectclass=* | more
But when I run the 'getent passwd' command, it only shows me my local user accounts and none of my ldap accounts. I also can't SSH in using a ldap account.
Solaris 10 is actually a whole other beast...I'm using the native Solaris ldap client (not PADL based) and I don't think it even works with SSL unless you're using the default ports (389/636).
Does anyone out there know how to setup the client-side for ldap authentication using SSL? Any tips, howto docs, or advice are appreciated. Thanks!

Hello again...
after some research and work together with Oracle Support I found out how to get it to work:
1. You have to create your own ConfigSet in OID using
SSL-Server-Authentication
(OpenSSL seems not to support SSL-encryption-only).
The following link shows on how to do that:
http://otn.oracle.com/products/oid/oidhtml/oidqs/html_masters/a_port01.htm
2. Add the following lines to your $HOME/ldaprc
TLS_CACERT /home/frank/oid-caroot.pem
TLS_REQCERT allow
TLS_CIPHERS SSLv3
ssl on
tls_checkpeer no
oid-caroot.pem is the CA-Root Certificate you got
during step 1
3. you should now be able to use ldapsearch using SSL
If you still can't connect using SSL you may have run into another issue with OpenSSL which affects systems using OpenSSL version 0.9.6d and above. The problem seems to be caused by an security fix which may not be compliant with the SSL implementation of Oracle.
I opened an Bug for that problem with RedHat. This Bug Description also includes an proposal for an Patch which solves the problem (but may introduce some security risks). See the Bug at RedHat:
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=123849
Bye
Frank Berger

FTP with SSL cert on ACNS via WCCP

I have a client using an SSL cert to connect to an ftp server. The user is being redirected to a CE-511 via WCCP v2 but the FTP connection does not work. If I bypass the user (in my wccp acl) it works fine - following a default route to my PIX.
Any info, good or bad will be greatly appreciated.
- Matt

What is the software version running on the CE-511. Did you try upgrading to the latest version of the firmware. This should solve the issue.

[solved]partially working network, problems with ssl and irc

Hi,
for a weird reason I can't access any websites with https anymore nor can i connect to any irc servers with irssi and connection attempts with ssh time out. The system is up2date and I am using kdemod as DE.
My rc.conf looks like this:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="de_DE.utf8"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Berlin"
KEYMAP="de"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(!b44 !mii !ipw2200 !libipw !ac97_bus !snd-mixer-oss !snd-pcm-oss !snd-page-alloc !snd-pcm !snd-timer !snd !snd-ac97-codec !snd-intel8x0 !snd-intel8x0m !soundcore b44 mii ipw2200 libipw ac97_bus snd-mixer-oss snd-pcm-oss snd-page-alloc snd-pcm snd-timer snd snd-ac97-codec snd-intel8x0 snd-intel8x0m soundcore)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="horst-lp"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
eth0="dhcp"
# Wireless: See network profiles below
#Static IP example
#eth0="dhcp"
eth0="dhcp"
INTERFACES=(!eth0 !eth1 !wlan0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng hal !network networkmanager avahi-daemon avahi-dnsconfd alsa cdemud kdm samba mpd lighttpd)
Earlier I had some problems with not resolving addresses, which I somehow got rid of. At the time I blamed my isp.
Perhaps something broke when I had a program running in wine to play with a car too and I had to switch the laptop off bc it didn't want to react anymore.
thx for reading
e: I don't know why, but it worked when I started Arch this morning.. while it didn't yesterday although everything worked correctly on my other PCs.
Last edited by dt (2009-11-07 09:02:46)

Hi,
for a weird reason I can't access any websites with https anymore nor can i connect to any irc servers with irssi and connection attempts with ssh time out. The system is up2date and I am using kdemod as DE.
My rc.conf looks like this:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="de_DE.utf8"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Berlin"
KEYMAP="de"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(!b44 !mii !ipw2200 !libipw !ac97_bus !snd-mixer-oss !snd-pcm-oss !snd-page-alloc !snd-pcm !snd-timer !snd !snd-ac97-codec !snd-intel8x0 !snd-intel8x0m !soundcore b44 mii ipw2200 libipw ac97_bus snd-mixer-oss snd-pcm-oss snd-page-alloc snd-pcm snd-timer snd snd-ac97-codec snd-intel8x0 snd-intel8x0m soundcore)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="horst-lp"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
eth0="dhcp"
# Wireless: See network profiles below
#Static IP example
#eth0="dhcp"
eth0="dhcp"
INTERFACES=(!eth0 !eth1 !wlan0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng hal !network networkmanager avahi-daemon avahi-dnsconfd alsa cdemud kdm samba mpd lighttpd)
Earlier I had some problems with not resolving addresses, which I somehow got rid of. At the time I blamed my isp.
Perhaps something broke when I had a program running in wine to play with a car too and I had to switch the laptop off bc it didn't want to react anymore.
thx for reading
e: I don't know why, but it worked when I started Arch this morning.. while it didn't yesterday although everything worked correctly on my other PCs.
Last edited by dt (2009-11-07 09:02:46)

2-java clients communicate with java based web-service

I'm new 2 web-services.
I need to create 2-java clients(a game like chess) & communicate them through a java based web-service.
I can create the web service.(using Netbeans getting started tutorial.only the basic stuff)
when we create the 2-clients are those should be web-clients or are they should be normal java
applications.
(clients should be GUI based)
??

I'm new 2 web-services.
I need to create 2-java clients(a game like chess) & communicate them through a java based web-service.
I can create the web service.(using Netbeans getting started tutorial.only the basic stuff)
when we create the 2-clients are those should be web-clients or are they should be normal java
applications.
(clients should be GUI based)
??

Problem with SSL and IAS 9.0.4.3.0

Hi,
I want to use SSL for my own webservice, but when I enabled SSL for my AS then I can't use my Forms-Applikation.
I use a new installed Applikation Server Version 9.0.4.3.0 (Forms/Reports) on SLES 9 and the webservice is in a new OC4J-Container.
Without SSL is everything fine.
But when I made the changes to use SSL then I can use my Webservice with or without SSL, but I can't start the Test-Form-Mask (test.fmx) from the AS.
In the Java-Console I see the following:
oracle.forms.net.ConnectionException: 500
     at oracle.forms.net.ConnectionException.createConnectionException(Unknown Source)
     at oracle.forms.net.HTTPNStream.getResponse(Unknown Source)
     at oracle.forms.net.HTTPNStream.doFlush(Unknown Source)
     at oracle.forms.net.HTTPNStream.flush(Unknown Source)
     at java.io.DataOutputStream.flush(Unknown Source)
     at oracle.forms.net.HTTPConnection.connect(Unknown Source)
     at oracle.forms.engine.FormsDispatcher.initConnection(Unknown Source)
     at oracle.forms.engine.FormsDispatcher.init(Unknown Source)
     at oracle.forms.engine.Runform.initConnection(Unknown Source)
     at oracle.forms.engine.Runform.startRunform(Unknown Source)
     at oracle.forms.engine.Main.createRunform(Unknown Source)
     at oracle.forms.engine.Main.start(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
And in the error log from the Apache I see the following:
[Mon Nov 5 17:45:47 2007] [error] [client 127.0.0.2] [ecid: 84777561304,1] File does not exist: /opt/oracle/product/ias904/forms90/java/oracle/forms/registry/default.dat
[Mon Nov 5 17:45:47 2007] [error] [client 127.0.0.2] [ecid: 84777561477,1] File does not exist: /opt/oracle/product/ias904/forms90/java/oracle/forms/engine/RunformBundle_de_DE.class
[Mon Nov 5 17:45:47 2007] [error] [client 127.0.0.2] [ecid: 84777561497,1] File does not exist: /opt/oracle/product/ias904/forms90/java/oracle/forms/engine/RunformBundle_de_DE.properties
[Mon Nov 5 17:45:52 2007] [error] [client 127.0.0.2] [ecid: 76187632590,1] File does not exist: /opt/oracle/product/ias904/forms90/java/oracle/ewt/alert/resource/AlertBundle_de_DE.class
[Mon Nov 5 17:45:53 2007] [error] [client 127.0.0.2] [ecid: 76187632640,1] File does not exist: /opt/oracle/product/ias904/forms90/java/oracle/ewt/alert/resource/AlertBundle_de_DE.properties
[Mon Nov 5 17:46:39 2007] [error] [client 127.0.0.2] [ecid: 1194281199:127.0.0.2:31638:0:36,0] MOD_OC4J_0095: mod_oc4j's SSL is enabled for communication with oc4j, but the oc4j process it gets has a non-SSL port. Possibly a configuration problem.
[Mon Nov 5 17:46:39 2007] [error] [client 127.0.0.2] [ecid: 1194281199:127.0.0.2:31638:0:36,0] MOD_OC4J_0119: Failed to get an oc4j process for destination: home
[Mon Nov 5 17:46:39 2007] [error] [client 127.0.0.2] [ecid: 1194281199:127.0.0.2:31638:0:36,0] MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
I think the first 5 messages are not so important, but I don't know what the last 3 messages mean.
I can't find any mistakes in my configuration. I have tested it with the SUN-Java Plug-In and with the JIinitator, but is the same result.
Have someone a hint for me or better idea to use SSL with a webservice?
Thanks in advance.
Knut

I configured the HTTP-Server and the OC4J-Containers for Forms and my webservice for SSL.
But for Forms I don't need SSL, only for the webservices.
In the meantime I tested SSL with IAS 10.1.2.0.2 and there is the same problem.
I think the last 3 messages come from Web Cache, because everytime when I try to test whether the Web Cache is working these messages shown in the error log from Apache.
Sometimes are the following messages in the error log of the Apache:
[Tue Nov 6 16:07:58 2007] [warn] [client 127.0.0.2] [ecid: 89154992130,1] MOD_OC4J_0184: Failed to find an oc4j process for destination: OC4J_BI_Forms
[Tue Nov 6 16:07:58 2007] [error] [client 127.0.0.2] [ecid: 89154992130,1] MOD_OC4J_0145: There is no oc4j process (for destination: OC4J_BI_Forms) available to service request.
[Tue Nov 6 16:07:58 2007] [error] [client 127.0.0.2] [ecid: 89154992130,1] MOD_OC4J_0119: Failed to get an oc4j process for destination: OC4J_BI_Forms
[Tue Nov 6 16:07:58 2007] [error] [client 127.0.0.2] [ecid: 89154992130,1] MOD_OC4J_0013: Failed to call destination: OC4J_BI_Forms's service() to service the request.
But I can not figure out when these messages are written
Message was edited by:
Melman

Nodemanager configuration with SSL and Subject Alternative Names.

We want to configure serveral nodemanagers in serveral machines using SSL. Is possible to use only one certificate with one CN and several subject alternative names (one per machine)?
We cannot configure the nodemanager, we always get an SSLHandShake exception.
Thanks.

Hi,
Hope you found out resolution to your issue.
incase you havent , presuming the CN used in your certificate is not the host name and all the host servers can resolved/ identify that CN. Dont see major problem in the way you explained.
However handshake exception only points at certain specific case
- where the certs are not imported into keystores ( client or server side) or
- certs mismatching at clent & server
- too many certs with the same CN in the same keystore or CN resolving to more than 1 cert ( if its possible).
Let me know if you need help in reolving this and also paste the error trace of 'handshake' exception you see.
Sri

Java.lang.UnsupportedClassVersionError with ADF and Websphere

I'm trying to get an app running with ADF/Tomahawk/MyFaces/Facelets going on Websphere 6.0. However Websphere is running with a 1.4.2 JVM instead of 1.5 so I get an error when it comes to the ADF NavigationHandlerImpl which has been built with Java 1.5. Is there a Java 1.4 version of ADF faces I should have downloaded somewhere?
Hints appreciated.
Regards, Murray
==<logs below >=================================
[5/4/06 13:15:47:816 GMT] 00000011 FacesConfigur I Reading config /WEB-INF/faces-config.xml
[5/4/06 13:15:48:236 GMT] 00000011 WebApp E LinkageError while defining class: oracle.adfinternal.view.faces.application.NavigationHandlerImpl
Could not be defined due to: oracle/adfinternal/view/faces/application/NavigationHandlerImpl (Unsupported major.minor version 49.0)
This is often caused by having a class defined at multiple
locations within the classloader hierarchy. Other potential causes
include compiling against an older or newer version of the class
that has an incompatible method signature.
Dumping the current context classloader hierarchy:
==> indicates defining classloader
==>[0]
com.ibm.ws.classloader.CompoundClassLoader@7d4e3ab9
Local ClassPath: C:\apps\WebSphere60\profiles\default\installedApps\localhostNode01Cell\aui_war.ear\aui.war\WEB-INF\classes;C:\apps\WebSphere60\profiles\default\installedApps\localhostNode01Cell\aui_war.ear\aui.war\WEB-INF\lib\activation-1.0.2.jar;C:\apps\WebSphere60\profiles\default\installedApps\localhostNode01Cell\aui_war.ear\aui.war\WEB-INF\lib\adf-facelets.jar;C:\apps\WebSphere60\profiles\default\installedApps\localhostNode01Cell\aui_war.ear\aui.war\WEB-INF\lib\adf-faces-api-ea20-SNAPSHOT.jar;C:\apps\WebSphere60\profiles\default\installedApps\localhostNode01Cell\aui_war.ear\aui.war\WEB-INF\lib\adf-faces-impl-ea20-SNAPSHOT.jar;C:\apps\WebSphere60\profiles\default\installedApps\localhostNode01Cell\aui_war.ear\aui.war\WEB-INF\lib\aui.jar;C:\apps\WebSphere60\profiles\default\installedApps\localhostNode01Cell\aui_war.ear\aui.war\WEB-INF\lib\common-annotations.jar;C:\apps\WebSphere60\profiles\default\installedApps\localhostNode01Cell\aui_war.ear\aui.war\WEB-INF\lib\commons-beanutils-1.7.0.jar;C:\apps\WebSphere60\profiles\default\installedApps\localhostNode01Cell\aui_war.ear\aui.war\WEB-INF\lib\commons-codec-1.3.jar;C:\apps\WebSphere60\profiles\default\installedApps\localhostNode01Cell\aui_war.ear\aui.war\WEB-INF\lib\commons-collections-3.1.jar;C:\apps\WebSphere60\profiles\default\installedApps\localhostNode01Cell\aui_war.ear\aui.war\WEB-INF\lib\commons-digester-1.6.jar;C:\apps\WebSphere60\profiles\default\installedApps\localhostNode01Cell\aui_war.ear\aui.war\WEB-INF\lib\commons-el-1.0.jar;C:\apps\WebSphere60\profiles\default\installedApps\localhostNode01Cell\aui_war.ear\aui.war\WEB-INF\lib\commons-fileupload-1.1.jar;C:\apps\WebSphere60\profiles\default\installedApps\localhostNode01Cell\aui_war.ear\aui.war\WEB-INF\lib\commons-io-1.2.jar;C:\apps\WebSphere60\profiles\default\installedApps\localhostNode01Cell\aui_war.ear\aui.war\WEB-INF\lib\commons-lang-2.1.jar;C:\apps\WebSphere60\profiles\default\installedApps\localhostNode01Cell\aui_war.ear\aui.war\WEB-INF\lib\commons-logging-1.0.4.jar;C:\apps\WebSphere60\profiles\default\installedApps\localhostNode01Cell\aui_war.ear\aui.war\WEB-INF\lib\el-api.jar;C:\apps\WebSphere60\profiles\default\installedApps\localhostNode01Cell\aui_war.ear\aui.war\WEB-INF\lib\el-ri.jar;C:\apps\WebSphere60\profiles\default\installedApps\localhostNode01Cell\aui_war.ear\aui.war\WEB-INF\lib\jsf-facelets1014.jar;C:\apps\WebSphere60\profiles\default\installedApps\localhostNode01Cell\aui_war.ear\aui.war\WEB-INF\lib\jsp-api.jar;C:\apps\WebSphere60\profiles\default\installedApps\localhostNode01Cell\aui_war.ear\aui.war\WEB-INF\lib\jstl-1.1.0.jar;C:\apps\WebSphere60\profiles\default\installedApps\localhostNode01Cell\aui_war.ear\aui.war\WEB-INF\lib\log4j-1.2.13.jar;C:\apps\WebSphere60\profiles\default\installedApps\localhostNode01Cell\aui_war.ear\aui.war\WEB-INF\lib\mob-impl-files.jar;C:\apps\WebSphere60\profiles\default\installedApps\localhostNode01Cell\aui_war.ear\aui.war\WEB-INF\lib\mob-layer-interfaces.jar;C:\apps\WebSphere60\profiles\default\installedApps\localhostNode01Cell\aui_war.ear\aui.war\WEB-INF\lib\mob-layer-standalone.jar;C:\apps\WebSphere60\profiles\default\installedApps\localhostNode01Cell\aui_war.ear\aui.war\WEB-INF\lib\myfaces-api-1.1.3-SNAPSHOT.jar;C:\apps\WebSphere60\profiles\default\installedApps\localhostNode01Cell\aui_war.ear\aui.war\WEB-INF\lib\myfaces-impl-1.1.3-SNAPSHOT.jar;C:\apps\WebSphere60\profiles\default\installedApps\localhostNode01Cell\aui_war.ear\aui.war\WEB-INF\lib\portlet.jar;C:\apps\WebSphere60\profiles\default\installedApps\localhostNode01Cell\aui_war.ear\aui.war\WEB-INF\lib\serializer.jar;C:\apps\WebSphere60\profiles\default\installedApps\localhostNode01Cell\aui_war.ear\aui.war\WEB-INF\lib\tomahawk-1.1.2-SNAPSHOT.jar;C:\apps\WebSphere60\profiles\default\installedApps\localhostNode01Cell\aui_war.ear\aui.war\WEB-INF\lib\xalan.jar;C:\apps\WebSphere60\profiles\default\installedApps\localhostNode01Cell\aui_war.ear\aui.war\WEB-INF\lib\xercesImpl.jar;C:\apps\WebSphere60\profiles\default\installedApps\localhostNode01Cell\aui_war.ear\aui.war\WEB-INF\lib\xml-apis.jar;C:\apps\WebSphere60\profiles\default\installedApps\localhostNode01Cell\aui_war.ear\aui.war\WEB-INF\lib\xpp3_min-1.1.3.4.O.jar;C:\apps\WebSphere60\profiles\default\installedApps\localhostNode01Cell\aui_war.ear\aui.war\WEB-INF\lib\xstream-1.1.3.jar;C:\apps\WebSphere60\profiles\default\installedApps\localhostNode01Cell\aui_war.ear\aui.war\WEB-INF\lib\xstream-with-attributes.jar;C:\apps\WebSphere60\profiles\default\installedApps\localhostNode01Cell\aui_war.ear\aui.war;
Delegation Mode: PARENT_FIRST
[1] com.ibm.ws.classloader.JarClassLoader@630356666 Local Classpath: Delegation mode: PARENT_FIRST
[2] com.ibm.ws.classloader.ProtectionClassLoader@2333faba
[3] com.ibm.ws.bootstrap.ExtClassLoader@7f427ab8
[4] sun.misc.Launcher$AppClassLoader@7f4cbab8
[5] sun.misc.Launcher$ExtClassLoader@7f30bab8
---Original exception---
java.lang.UnsupportedClassVersionError: oracle/adfinternal/view/faces/application/NavigationHandlerImpl (Unsupported major.minor version 49.0)
     at java.lang.ClassLoader.defineClass0(Native Method)
     at java.lang.ClassLoader.defineClass(ClassLoader.java(Compiled Code))
     at java.security.SecureClassLoader.defineClass(SecureClassLoader.java(Compiled Code))
     at com.ibm.ws.classloader.CompoundClassLoader._defineClass(CompoundClassLoader.java:576)
     at com.ibm.ws.classloader.CompoundClassLoader.findClass(CompoundClassLoader.java(Compiled Code))
     at com.ibm.ws.classloader.CompoundClassLoader.loadClass(CompoundClassLoader.java:414)
     at java.lang.ClassLoader.loadClass(ClassLoader.java(Compiled Code))
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Class.java:260)
     at org.apache.myfaces.shared_impl.util.ClassUtils.classForName(ClassUtils.java:131)
     at org.apache.myfaces.shared_impl.util.ClassUtils.simpleClassForName(ClassUtils.java:157)
     at org.apache.myfaces.config.FacesConfigurator.getApplicationObject(FacesConfigurator.java:521)
     at org.apache.myfaces.config.FacesConfigurator.configureApplication(FacesConfigurator.java:448)
     at org.apache.myfaces.config.FacesConfigurator.configure(FacesConfigurator.java:131)
     at org.apache.myfaces.webapp.StartupServletContextListener.initFaces(StartupServletContextListener.java:66)
     at org.apache.myfaces.webapp.StartupServletContextListener.contextInitialized(StartupServletContextListener.java:49)
     at com.ibm.ws.webcontainer.webapp.WebApp.notifyServletContextCreated(WebApp.java:1355)
     at com.ibm.ws.webcontainer.webapp.WebApp.initialize(WebApp.java:371)
     at com.ibm.ws.webcontainer.webapp.WebGroup.addWebApplication(WebGroup.java:114)
     at com.ibm.ws.webcontainer.VirtualHost.addWebApplication(VirtualHost.java:127)
     at com.ibm.ws.webcontainer.WebContainer.addWebApp(WebContainer.java:776)
     at com.ibm.ws.webcontainer.WebContainer.addWebApplication(WebContainer.java:729)
     at com.ibm.ws.runtime.component.WebContainerImpl.install(WebContainerImpl.java:140)
     at com.ibm.ws.runtime.component.WebContainerImpl.start(WebContainerImpl.java:360)
     at com.ibm.ws.runtime.component.ApplicationMgrImpl.start(ApplicationMgrImpl.java:1019)
     at com.ibm.ws.runtime.component.DeployedApplicationImpl.fireDeployedObjectStart(DeployedApplicationImpl.java:1028)
     at com.ibm.ws.runtime.component.DeployedModuleImpl.start(DeployedModuleImpl.java:538)
     at com.ibm.ws.runtime.component.DeployedApplicationImpl.start(DeployedApplicationImpl.java:724)
     at com.ibm.ws.runtime.component.ApplicationMgrImpl.startApplication(ApplicationMgrImpl.java:683)
     at com.ibm.ws.runtime.component.ApplicationMgrImpl$AppInitializer.run(ApplicationMgrImpl.java:1678)
     at com.ibm.ws.runtime.component.ComponentImpl$_AsynchInitializer.run(ComponentImpl.java:304)
     at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1332)

Hi,
you will have to compile the application with JDK 1.4 in this case. This should work for JSF and ADF Faces.
Frank

How can one get java to work with SnowLeopard and FF13

SInce the install of the most recent Java update (9) for SnowLeopard (10.6.8) Firefox 13 simply advises that there is no plugin installed. The behavior the update indicates will take place (where the web page provides the option to enable the plugin) simply has never presented itself. At this point, java is simply no longer available on a Mac running SNowLeopard and using Firefox. Is there a solution to this other than upgrading to Lion?

Yes. However, do note that FF is only on the machine for testing, I don't use it, preferring Safari. Any further issues with FF are best answered at http://support.mozilla.org/

Java Client FTP with ssl and fxp

Similar Messages

Maybe you are looking for