Data transfer position for candidate

Hi Experts,
We are implementing ECC 6, E Recruiting. When we do data transfer activity for a candidate then we want to pull the position on which data transfer activity was done for candidate in a Z Report.
Can any one tell me in which info type position is stored for a candidate at which data transfer activity is done or it is not stored at all any where in data base.
Regards
Puneet

data is always stored anywhere, how would the system know what to show otherwise?
http://www.nicx.co.uk/attachments/File/Data%20Model%20&%20Infotypes.pdf

Similar Messages

The standard SAP data transfer program for vendors

Hi Experts,
Could u please tell me that wt is the program which is <b>"the standard SAP data transfer program for vendors"</b>?
could you plz tell me what exactly is it?
and itz tcode..
is it the "XK01" only or anything other?
thnx
Message was edited by: sey ni

Hi,
Pl use RFBIKR00 for Vendor Matser upload. Th eProgram documentation is very useful too.
Regards,
Suresh Datti

Data transfer files for Sales Invoices (A/R Invoices)

Hi,
I want Data Transfer Sheets for A/R Invoices in Sales module, Can you provide me?
Thanks,
Surendra.

Hi Fidel,
I have checked that path.
The below mension templetes are available in that path
C:\Program Files\SAP\SAP Business One\Data Transfer Workbench\Templates\Templates\
oSalesForecast, oSalesOpportunities, oSalesPersons, oSalesStages, oSalesTaxAuthorities, oSalesTaxAuthoritiesTypes, oSalesTaxCodes, oSalesTaxInvoice, & etc
No templates for Sales Invoice. I saw oInvoices template, it will usefull for Sales invoices, can you check it & confirm me please?
Path: C:\Documents and Settings\Noni SAP4\Desktop\ZSL\Templates\Templates\oInvoices
Thanks,
Surendra.

Problems when creating data transfer process for 0EC_CPLAN (Compensation )

Hi experts,
I have the infoobject 0EC_CPLAN (Compensation Plan) Active in my BW sistem.
I tri to create data transfer process for text and atributtes for it, but when i do this i get a "Target 0EC_CPLAN (Type IOBJA) is not active" error message.
When i double-click on the texts or attributes i recive an "Administration function is not possible for this InfoObject" information message and i can not active or edit it.
What could this be? I am breaking my brain.
Thank you all!

Debugging i have seen this:
15         CALL FUNCTION 'RSD_IOBJ_GET'
16           EXPORTING
17             i_iobjnm         = l_iobjnm
18             i_objvers        = rs_c_objvers-active
19             i_bypass_buffer = rs_c_false
20           IMPORTING
21             e_s_vcha         = l_s_vcha
22           EXCEPTIONS
23             iobj_not_found   = 1
24             illegal_input    = 2
25             bct_comp_invalid = 3
26             OTHERS           = 4.
27         IF sy-subrc <> 0 OR l_s_vcha-infoarea IS INITIAL.
28           MESSAGE i025(rsawbn).
l_s_vcha-infoarea is Initial.
Dues this mean that the object has no-infoarea??? In infoprovider i is under "enterprise compensation management" Does it give you a clue?
Thanks!

Data Transfer Toolbox for ECC 6.0

I am on ECC 6.0 and I am trying to install the data transfer toolbox (DTT) for HCM. I installed the ERP05V4.SAR file (which is in the 600-ERP-DATA folder), but there are no DTT tcodes. A colleague of mine told me he has used this in earlier versions of SAP (ECC 5.0) and he installed BPERPVD.SAR (which is in the 500-ERP-DATA folder) and the DTT was installed. So it seems that this does not exist for ECC 6.0, but we need it so I am looking for help!
I downloaded all of these files from OSS-downloads-SAP installations and upgrades-Enter by application group-SAP best practices-Best practices for my SAP all in one-SAP BP for HCM-HCM V1.500-installation.
Thanks
Mike

Hi Michael,
Were you able to get DTT installed for ECC 6.0? We are also, in the similar situation, trying to get DTT loaded in ECC 6.0.
Thanks.

Hi Data transfer methods for ABAP Dataflow

HI
Good Day !!!!
Can any one Explain about What are Data tansfer mothods in ABAP Dataflow Explain Each one which is the best one can you explain with example .
Regards
Chandu

Data Transfer
Definition
Synchronous Data Transfer
Data is transferred directly (simultaneously, synchronously) from program to program via CPI-C communication.
Both communications partners must be available at the same time. Because the central SAP system in a typical SAP installation does not run round the clock, but the linked systems are frequently in operation 24 hours a day, asynchronous data transfer is necessary.
Synchronous data transfer has the following disadvantages:
Transfer is not possible is the partner system or the line is not available.
A data backlog in the reciever system causes a data backlog in the sender system. Processing in the application is delayed.
If a connection is broken, it may be necessary to perform a recovery in both systems.
Asynchronous Data Transfer
With asynchronous, or buffered, data transfer, data is temporarily stored in a sequential queue.
Asynchronous transfer has the following advantages:
Wait times in the sender system are avoided.
A recovery is automatically performed in the sender system.
Transfer need not be performed during online time. This avoids placing unnecessary load on the system and thus helps to reduce costs.
The Queue Application Programming Interface (Q-API) is an SAP interface for asynchronous data transfer.
Data is buffered sequentially and processed immediately or later by an asynchronously running process.
One possible processing method is to send data to an external partner system via CPI-C. Data units that belong together can be stored in accordance with transaction and sent to a communications partner.
Data is buffered in queues before it is transferred to the target system.
In an R/3 System, the queues are stored in a relational database. All R/3 database systems are supported.

Data transfer software for Samsung cell phones

hi,
does anyone know where i could buy data transfer software + usb cable for a samsung a650? i have been able to find the software for windows pcs but not for mac os x.
thanks,
vince

I have found two possibilities for iSync with a Samsung A650:
Data Pilot: http://www.susteen.com/phonesupport/en_US/13/7/410
OnSync: http://www.onmadesoft.com/pgs/mobiles_samsung.html
OnSync is shareware, so you can try it out, but you'll have to find a cable first. It's not clear from their web site whether it works with the A650 specifically.
I have an A650 also, and am interested in hearing from anyone who's actually succeeded in using it with iSync.

How to enable delta without data transfer option for Collections - Extracts

Hi All,
My question is basically related to FSCM - Collections related data sources and Init and Delta loads of the same.
Once the Init is completed, I wanted to do delta without data transfer and option is graded out - means can not really select the option for Collections Data Sources ..
For Example I have OCLM_INVOICE as my data source which has lot of data to extract - and in the Init stage itself, its either giving errors or keeps running for longer time (Records to be extracted is ONLY 400000) and finally shows in the monitor as 400000 of 0 Records..
And also Is there any place where I can find that all of Collection data sources are TIME STAMP based or other options.
I appreciate your quick an ddetails reply and points will be awarded for sure.
Thanks
AK.

As far as I remember there some datasources which wont support init w/o data transfer. I guess COPA is one of them. I havent worked on datasource 0CLM_INVOICE but it is possible that even this could be same case. When I seached on help.sap.com for this datasource, I found this info -
(I am pasting content because strangely the webpage doesnt give html link for this search result window)
DataSource Transactional Data: 0CLM_INVOICE
This DataSource is used to extract the transaction data of an invoice from Accounts Receivable Accounting (FI-AR). The system determines the key figures from the amounts of the line items belonging to the invoice. The date fields each contain the respective date of an action that refers to a line item. The extractor provides the data in optimized form for SAP Collections Management.
Technical Data
Application Components Collections Management (0FSCM-CLM)
Available as of Release mySAP ERP Value Pack 2005.1
Shipment SAP NetWeaver 2004s BI Content Add-On 3 SP02
Content Versions There are no content versions.
RemoteCube-Capable No
Delta-Capable Yes
Extraction from Archives No
Verifiable Yes
Data Modeling
Delta Update
The DataSource permits delta update with generic delta processing using the time stamp. The system determines the invoice reference for a document in Business Transaction Event (BTE) 5010 and saves it with a time stamp. In the case of a delta upload, it determines the amounts of the line items based on these document numbers.
Extractor Logic
Verification of Key Figures
If necessary, you can check the key figures of the individual customers as follows:
In the source system, from the SAP Easy Access screen, choose the following function: Accounting u2192 Financial Supply Chain Management u2192 Collections Management u2192 Integration with Accounts Receivable Accounting u2192 Process Receivables (Old).
Enter the required customer.
The Customer Account - Process Receivables screen appears. Here you see a list of all invoices for which there are open receivables.
Using this list, you can compare the following key figures:
Original Amount of Invoice or Credit Memo (INVOICE_AMOUNT)
Amount Paid (PAID_AMOUNT)
Open Amount (OPEN_AMOUNT)
Total of All Credit Memos for Selected Invoice (CREDITED_AMOUNT)
Amount Arranged for Payment (PAYMENT_ARRANGED)
Unsychronized Backup Recovery in BW System
If you import backup copies asynchronously, you have to initialize the delta procedure for the DataSource again.
Abhijit
Edited by: ABHIJIT TEMBHEKAR on Nov 18, 2008 5:00 PM

External Data Transfer KCLJ for Loans- Incorrect receiver Records

I am doing some test migration for FS-CML Loans area. I am using the delivered sender program TR_DARL, and transfer structure JBIUDA1.
I have created the source file according to the receiver structure, and when uploaded using transaction KCLJ, the whole file is going to error, with :
Number of receiver records: 5
Number of correct receiver records:
Number of incorrect receiver records: 5
Output file for incorrect sender records is:
C:\Documents and Settings\specified_folder
I do not know which of the fields or records is incorrect. Can someone please help.
Also in the selection screen for KCLJ, I am running the loading from the presentation layer. Can someone please explain where the output file is stored, as I cant see any output file in the path I specified.
Regards
Fisayo.

Hi
When you execute the KCLJ transaction, you have options to the Log. You can see it at the end of screen.
The button is "Expert mode". You have this options:
- Log level
- Information
- Warnings
- Formatting
After upload the file, you can see the button "+" in the screen. If you click it, the system open the details.
Furthermore, you can use the transaction KCLP to see the log. When you execute this transaction, the signal "+" is avaiable to.
Take care with the log size. There is a limitation.
Regards
Lucciano

Data Transfer Tool for ECC 6.0

Hi All,
Good Morning. I would like to know if anybody has had the opportunity to use this tool in ECC 6.0. If so, where did you obtain the software related to this tool?
Please Advise.
Kind Regards,
Daniel A. La Mendola

I am actually looking for where the program resides and if it exists for ECC 6.0. I have found tons of documentation, but nothing on how to obtain the tool itself.
If anybody can assist me in the endeavor it would be greatly appreciated.
Thanks again for you help

How can I check the data transfer rate of my FW800 port

I have an iMac 2.4 20 inch (MB323LL/A) with a Lacie external rugged hard drive (320 GB). I have attached it using my FW800 port with the cable supplied with the drive.
It seems slow to me so I was wondering if there is any way to see what the current data transfer is for a backup in progress. Of course it should be 800Mbps but is it really moving at that speed ? How can I tell what speed it is transferring at ? Can I use the same method for USB ports too ?

When you move a large file, you are more likely to see a sustained transfer rate than a small file. Small files have to be individually read/write back and forth, thus slows the actual transfer rate down. If you are moving any file up to 4 GB and probably over 1 MB you'll see more realistic transfer rates. Furthermore your hard drive access time, and RPM figures into the equation too, as well as how much RAM you have. 800Mbps works out to 100 Megabytes per second under ideal conditions.

Rp-pppoe connected but no data transfer

hi,
i installed arch on 27th . Post installation i setup internet connection using rp-pppoe, which was a straight forward setup. I also got connected to net and downloaded data upon a system upgrade. Except this one instance, thereafter last two days if connected i am getting no data transfer after a connection is established.
Upon ping of 8.8.8.8 i am getting this error of destination net unreachable & if you ping google.com i get the error unknown host.
when i checked the pppoe status i get this message:
link is up and running on interface ppp0 and no packet errors both RX and TX.
The system upgrade did not happen on 27th due to the TZselec tconflicting files error.
It is a fresh system.
i am pasting below the lines from the messages.log of 27th when i got the data transfer happened for the first time and next of 29th with the same system but nothing happening except i am connected.
27th:
Jun 27 12:46:03 localhost kernel: [ 117.794497] r8169 0000:02:00.0: eth0: link up
Jun 27 12:46:06 localhost kernel: [ 120.763326] eth0: no IPv6 routers present
Jun 27 12:58:01 localhost kernel: [ 835.641169] PPP generic driver version 2.4.2
Jun 27 12:58:01 localhost pppd[888]: pppd 2.4.5 started by root, uid 0
Jun 27 12:58:01 localhost pppd[888]: Using interface ppp0
Jun 27 12:58:01 localhost pppd[888]: Connect: ppp0 <--> /dev/pts/0
Jun 27 12:58:02 localhost pppoe[889]: PADS: Service-Name: ''
Jun 27 12:58:02 localhost pppoe[889]: PPP session is 14295 (0x37d7)
Jun 27 12:58:02 localhost pppd[888]: CHAP authentication succeeded: CHAP authentication success, unit 7436
Jun 27 12:58:02 localhost pppd[888]: CHAP authentication succeeded
Jun 27 12:58:02 localhost kernel: [ 837.068606] PPP BSD Compression module registered
Jun 27 12:58:03 localhost pppd[888]: Cannot determine ethernet address for proxy ARP
Jun 27 12:58:03 localhost pppd[888]: local IP address 117.204.173.123
Jun 27 12:58:03 localhost pppd[888]: remote IP address 117.204.160.1
Jun 27 12:58:03 localhost pppd[888]: primary DNS address 218.248.255.212
Jun 27 12:58:03 localhost pppd[888]: secondary DNS address 218.248.241.2
Jun 27 13:01:01 localhost /USR/SBIN/CROND[934]: (root) CMD (run-parts /etc/cron.hourly)
Jun 27 13:01:01 localhost anacron[938]: Anacron started on 2012-06-27
Jun 27 13:01:01 localhost anacron[938]: Will run job `cron.daily' in 28 min.
Jun 27 13:01:01 localhost anacron[938]: Will run job `cron.weekly' in 48 min.
Jun 27 13:01:01 localhost anacron[938]: Will run job `cron.monthly' in 68 min.
Jun 27 13:01:01 localhost anacron[938]: Jobs will be executed sequentially
Jun 27 13:04:10 localhost -- MARK --
Jun 27 13:16:48 localhost pppoe-stop: Killing pppd
Jun 27 13:16:48 localhost pppd[888]: Terminating on signal 15
Jun 27 13:16:48 localhost pppd[888]: Connect time 18.8 minutes.
Jun 27 13:16:48 localhost pppd[888]: Sent 411268 bytes, received 16885685 bytes.
29th :
Jun 29 17:54:13 localhost kernel: [ 5.019108] r8169 0000:02:00.0: eth0: link down
Jun 29 17:54:14 localhost dhcpcd[675]: eth0: carrier acquired
Jun 29 17:54:14 localhost kernel: [ 6.632983] r8169 0000:02:00.0: eth0: link up
Jun 29 17:54:14 localhost dhcpcd[675]: eth0: broadcasting for a lease
Jun 29 17:54:15 localhost dhcpcd[675]: eth0: offered 192.168.1.2 from 192.168.1.1
Jun 29 17:54:15 localhost dhcpcd[675]: eth0: acknowledged 192.168.1.2 from 192.168.1.1
Jun 29 17:54:15 localhost dhcpcd[675]: eth0: checking for 192.168.1.2
Jun 29 17:54:21 localhost dhcpcd[675]: eth0: leased 192.168.1.2 for 10080 seconds
Jun 29 17:54:21 localhost dhcpcd[675]: forked to background, child pid 702
Jun 29 17:54:21 localhost /usr/sbin/crond[751]: (CRON) STARTUP (1.4.8)
Jun 29 17:54:21 localhost /usr/sbin/crond[751]: (CRON) INFO (Syslog will be used instead of sendmail.): No such file or directory
Jun 29 17:54:21 localhost /usr/sbin/crond[751]: (CRON) INFO (running with inotify support)
Jun 29 17:54:47 localhost kernel: [ 39.424170] NET: Registered protocol family 10
Jun 29 17:54:47 localhost kernel: [ 39.441086] NET: Registered protocol family 4
Jun 29 17:54:47 localhost kernel: [ 39.458946] NET: Registered protocol family 5
Jun 29 17:54:47 localhost kernel: [ 39.480053] PPP generic driver version 2.4.2
Jun 29 17:54:47 localhost pppd[811]: pppd 2.4.5 started by root, uid 0
Jun 29 17:54:47 localhost pppd[811]: Using interface ppp0
Jun 29 17:54:47 localhost pppd[811]: Connect: ppp0 <--> /dev/pts/0
Jun 29 17:54:48 localhost pppoe[812]: PADS: Service-Name: ''
Jun 29 17:54:48 localhost pppoe[812]: PPP session is 2021 (0x7e5)
Jun 29 17:54:48 localhost pppd[811]: CHAP authentication succeeded: CHAP authentication success, unit 4257
Jun 29 17:54:48 localhost pppd[811]: CHAP authentication succeeded
Jun 29 17:54:48 localhost kernel: [ 40.866233] PPP BSD Compression module registered
Jun 29 17:54:48 localhost pppd[811]: not replacing existing default route via 192.168.1.1
Jun 29 17:54:48 localhost pppd[811]: Cannot determine ethernet address for proxy ARP
Jun 29 17:54:48 localhost pppd[811]: local IP address 117.204.161.173
Jun 29 17:54:48 localhost pppd[811]: remote IP address 117.204.160.1
Jun 29 17:54:48 localhost pppd[811]: primary DNS address 218.248.255.212
Jun 29 17:54:48 localhost pppd[811]: secondary DNS address 218.248.241.2
Jun 29 17:54:57 localhost kernel: [ 49.523342] eth0: no IPv6 routers present
Jun 29 18:01:01 localhost /USR/SBIN/CROND[876]: (root) CMD (run-parts /etc/cron.hourly)
Jun 29 18:01:01 localhost anacron[881]: Anacron started on 2012-06-29
Jun 29 18:01:01 localhost anacron[881]: Will run job `cron.daily' in 29 min.
Jun 29 18:01:01 localhost anacron[881]: Will run job `cron.weekly' in 49 min.
Jun 29 18:01:01 localhost anacron[881]: Will run job `cron.monthly' in 69 min.
Jun 29 18:01:01 localhost anacron[881]: Jobs will be executed sequentially
Jun 29 18:04:04 localhost pppoe-stop: Killing pppd
Jun 29 18:04:04 localhost pppd[811]: Terminating on signal 15
Jun 29 18:04:04 localhost pppd[811]: Connect time 9.3 minutes.
Jun 29 18:04:04 localhost pppd[811]: Sent 0 bytes, received 926 bytes.
Now in both the cases i got connected but as i said before except twice on 27th i am not able to have data transfer of any type either through ping or pacman upgrade.
Upon the same time i cross checked on my other systems, ubuntu and windows and i had no problems with the same, to confirm any issue with my isp. As of now i am typing one of those systems only.
I have googled a lot, read the other options of pppd,etc, but upon similar queries by other users found no viable solution to this problem.
My hostname is also proper in the config files. I also once used static ip for a change to see if things go working
but nothing is sucessful so far.
The only viable solution i read so far upon google search where there was a success was a fresh installation of arch by an user and he got the same working. But definitely i wont go with that. As i said above i got connected twice on the day of the installation and post that also i am now getting connected but with no data transfer.
Pls suggest what to do to get the connection working.
regards

Upon a search on the forums yesterday
i read one user query on this forums who was advised the same and he had the same problem like me and it did not got solved with either methodds.
Last his query was still open. I did not save that link.
So i did not give that method a try so far, waiting for a solution for this method without going for new developments thinking a search for a day or two might get some viable results.
i guess you are mentioning the topic of this link
https://wiki.archlinux.org/index.php/Pppd [This article explains how to set up a point-ti-point connections using pppd and the kernel PPPoE driver. ]
Further in my case the connection is happening and also getting disconnected. You can very well see the same in the log file which i pasted.
Jun 27 13:16:48 localhost pppd[888]: Connect time 18.8 minutes.
Jun 27 13:16:48 localhost pppd[888]: Sent 411268 bytes, received 16885685 bytes.
Jun 29 18:04:04 localhost pppd[811]: Connect time 9.3 minutes.
Jun 29 18:04:04 localhost pppd[811]: Sent 0 bytes, received 926 bytes.
So same thing but different results on 2 different days. So what the problem really is i dont understand. Infact what the problem is the system is also not giving out, except that a connection happens, no data transfer takes place and the connection is cut and the stats are also show. Just diving to implement some new method or a reinstall, without resolving this which looks sensible yet senseless too, simply does not appeal here. If really there is some bug or issue with that rp-pppoe package then there is some point to jump to another method.
This must be solvable some way or other.
Last edited by beopen (2012-06-29 17:30:16)

Issues in Data Transfer Process

Hello All,
After creating transformation from Infosource to InfoCube, now i am trying to data transfer process.
In DTP Type it displays "DTP for direct process", but i need DTP type as Standard(Can be scheduled).
Its giving me an error as "Source does not support direct access"
Could any one help me to solve this error.
Thanks in advance
Regards,
Nithin

Hi,
You can only use the type DTP for Direct Access as the target of the data transfer process for a VirtualProvider.
Check the below links
http://help.sap.com/saphelp_nw04s/helpdata/en/42/fa50e40f501a77e10000000a422035/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/42/fb8ed8481e1a61e10000000a422035/frameset.htm
Regards
KP
Edited by: prashanthk on Jan 19, 2011 5:15 PM

HR data transfer toolkit_ SAP Best practice

Hi All,
I got to know the New toolkit for HR Data Transfer in which SAP has provided the Built in Excel sheets for the certain Infotypes..I got the document through online. But am not able to use the transactions ..can any one help me out ..from where do i download the HR Data transfer toolkit and if any patches which i have install in the system.
Can you please help me out in giving me the Links.or steps from where do i donwload the toolkit.
Advance thanks for the help.
Regards
Rajeshwar

Rajesh,
You have to request basis to apply the sar file that is specified in best business practise documentation.
Also note that data transfer tool for ECC 6.0 is different from ECC 5.0 or R/3.
The data transfer tool is now (in ECC 6) shifted to LSMW.
regards
Sridhar

Error 7 occurred when generating the data transfer program

Hello All ,
In Master Data Load Process Chain , we get error like
1. System Response
Caller 09 contains an error message.
Diagnosis
Error 7 occurred when generating the data transfer program for the requested InfoSource.
System Response
The data transfer is terminated.
Procedure
Check the SAP Support Portal for the appropriate Notes and create a customer message if necessary.
Note : We faced this issue for two days now . Just repeating the load make it success .
If any one faced and fixed this issue . Please let me know .
Thanks in advance .

Hi,
. Initially goto transaction SE38, Run the program RSDS_DATASOURCE_ACTIVATE_ALL. Give your Datasource name, and source system and check the check box for "Only Inactive objects".
This will actiavate the given datasource.
2. Replicate the datasource in RSA1.
3. Try to schedule the infopackage for the datasource which you have activated now.
4. IF infopackage runs through, Repeat the process for all datasources ie uncheck the check box, which means it will activate all datasources for the source system.
Also make sure that there will be enough Back Ground Processor available....
Reduce the parallel process
Thanks
BVR

Data transfer position for candidate

Similar Messages

Maybe you are looking for