Database accidently started with lower version binary.
We recently upgraded and patched a version 9206 database to 9208. However, after this was done the database was bounced and accidently started with the 9206 binary and it has been running this way for a couple of weeks. My fix is to shut the database down as 9206, reset the environment to 9208 and restart. Is that all I need to do? Any feedback would be appreciated. Thanks
Thanks Mike. Just to clarify. The database was a 9208 database at the end of the upgrade. The upgrade to 9208 completed successfully and then I applied the AprCPU2008 patch.
When we upgrade databases we install a brand new binary patched to the level we want to upgrade to. Then we open the database, in migrate mode, using the new binary and run the catpatch and utlrp. So for a short time I have both the 9208 and 9206 binaries available.
What happened is that the server the database was on, in a Veritas cluster, was patched the next day. The Veritas resource setting for startup had not yet been changed to use 9208, so when the database came back up after the server patching Veritas used the 9206 OracleHome and binary to start the database.
So is my fix. "Just shutdown the database using the 9206 binary change the database environment to use the 9208 binary and restart and be done with it." valid. So I really have a 9208 database that was started with a 9206 OracleHome. Hopefully that makes sense.
Jon P
Similar Messages
-
Can I open psd files created in Photoshop CC with lower version? Actually CS5.
Can I open psd files created in Photoshop CC with lower version? Actually CS5.
My home and office have different version each.Yes, PROVIDED that the file has not been saved with any layers containing any of the specific new features introduced starting with Photoshop CC and higher.
If the file has been flattened or if it was flat to begin with there will be no problems. -
Creating Database view starting with m_z
Hi,
How to create a database view starting with m_z without using access key. Please help in this.Hi,
You cannot create the Database view with namespace M_Z any custom objects should be created with Y/Z/ if you want to create the Objects using other than these namespace..you need have access key from SAP.
You need to buy the Namespace from SAP to create the custom object M_Z* -
Higher version of Oracle client version is compatible with lower version
Higher version of Oracle client version is compatible with lower version Oracle DB
Oracle 10.2.0.5 client version should be compatible with 10.2.0.4 DB ?H wrote:
Higher version of Oracle client version is compatible with lower version Oracle DB
Oracle 10.2.0.5 client version should be compatible with 10.2.0.4 DB ?yes, compatible -
In Pages capitalization doesn't work as described. One can start with lower case and change to upper, but changing from upper case to any of the other options doesn't work. Is there a way around this or is this just a glitch that needs fixing?
I think it does work as described, but the description is not very complete. Capitalization does not change any of the characters that you type; what it does is allow some of the lower case characters to display as capitals. If you copy the result and paste it as plain text, you'll see that the lower case characters are still there. It doesn't actually say anywhere that it can make capitals display as lower case, and it can't.
The obvious way around this is to actually type what you want.
The more powerful way is to install WordService from Devon Technologies which adds the functionality of Pages' capitalization menu as well a lot of other ones. WordService actually changes the character to the one displayed, and it works in most of the applications on your Mac. -
Knwoing the database was started with which pfile/spfile
hello to everyone,
Actually, a question that crossed my mind and I wondered if it's possible in Oracle.
For an already started database, is there a way to know the database was started with which pfile/spfile? Is there a view that tells this for example.
Many thnx.
H HiruyaIf spfile parameter is null, then you can look for a
pfile with the name convention of
init<ORACLE_SID>.ora.Yes, you can, but that won't tell you anything about which pfile was used to start the instance. I can just as easily type:
startup pfile=/my/pfile/that/does/not/conform/to/any/naming/standard
There's no way to definitively determine which pfile was used to start an instance.
-Mark -
Database not start with srvctl command in rac 10g
hi
when i change parameter in sqlnet file
SQLNET.AUTHENTICATION_SERVICES= (NTS) to SQLNET.AUTHENTICATION_SERVICES= (NONE)
then database is not started with srvctl utillity but started with sqlplus enviroment.
please help in this issueuser521214 wrote:
hi,
we are implementing security policy for our client. our databas is on RAC . As per the security, we need to revoke sys dba priviliges. when i used SQLNET.AUTHENTICATION_SERVICES=(NTS) in sqlnet.ora or SQLNET.AUTHENTICATION_SERVICES=(NONE). the instance not start with the following command in rac 10g.
$srvctl start database -d abc
$ crs_stat -t
Name Type Target State Host
ora.db.db application OFFLINE OFFLINE
ora....b1.inst application ONLINE OFFLINE hosttest01
Edited by: user521214 on Apr 21, 2011 4:08 AMIs this the only parameter you changed? What happens when you undo this modification?
What do you see on log files? -
Application Basics
Name
Firefox
Version
20.0.1
User Agent
Mozilla/5.0 (Windows NT 6.0; rv:20.0) Gecko/20100101 Firefox/20.0
Build Configuration
about:buildconfig
Extensions
Name
Version
Enabled
ID
Ask Toolbar
3.14.0.100013
true
[email protected]
avast! WebRep
8.0.1483
true
[email protected]
Babylon
1.1.9
true
[email protected]
DivX Plus Web Player HTML5 <video>
2.1.2.145
true
{23fcfd51-4958-4f00-80a3-ae97e717ed8b}
FireFTP
2.0.13
true
{a7c6cf7f-112c-4500-a7ea-39801a327e5f}
I Want This
0.91.137
true
[email protected]
Java Console
6.0.35
true
{CAFEEFAC-0016-0000-0035-ABCDEFFEDCBA}
Internet Video Downloader
2.0.0.8
false
{B728AB94-9BC7-49b7-B76A-422BB31B2FD0}
Microsoft .NET Framework Assistant
1.2.1
false
{20a82645-c095-46ed-80e3-08825760534b}
Important Modified Preferences
Name
Value
accessibility.typeaheadfind.flashBar
0
browser.cache.disk.capacity
358400
browser.cache.disk.smart_size.first_run
false
browser.cache.disk.smart_size.use_old_max
false
browser.cache.disk.smart_size_cached_value
358400
browser.display.background_color
#C0C0C0
browser.display.use_system_colors
true
browser.history_expire_days.mirror
180
browser.places.importBookmarksHTML
false
browser.places.importDefaults
false
browser.places.leftPaneFolderId
-1
browser.places.migratePostDataAnnotations
false
browser.places.smartBookmarksVersion
4
browser.places.updateRecentTagsUri
false
browser.search.useDBForOrder
true
browser.startup.homepage
http://search.babylon.com/?affID=109935&tt=060612_7_&babsrc=HP_ss&mntrId=74662df50000000000000016446981f7
browser.startup.homepage_override.buildID
20130409194949
browser.startup.homepage_override.mstone
20.0.1
browser.tabs.warnOnClose
false
dom.w3c_touch_events.expose
false
extensions.lastAppVersion
20.0.1
general.useragent.extra.microsoftdotnet
( .NET CLR 3.5.30729; .NET4.0C)
gfx.blacklist.suggested-driver-version
10.6
keyword.URL
http://websearch.ask.com/redirect?client=ff&src=kw&tb=WBR&o=13993&locale=en_US&apn_uid=C12BDB56-7F51-458B-92C3-D4C6999AF
network.cookie.prefsMigrated
true
places.database.lastMaintenance
1365598414
places.history.expiration.transient_current_max_pages
77105
places.last_vacuum
1296624145
plugin.disable_full_page_plugin_for_types
application/pdf
print.print_printer
Lexmark Z2300 Series
print.printer_Lexmark_Z2300_Series.print_bgcolor
false
print.printer_Lexmark_Z2300_Series.print_bgimages
false
print.printer_Lexmark_Z2300_Series.print_command
print.printer_Lexmark_Z2300_Series.print_downloadfonts
false
print.printer_Lexmark_Z2300_Series.print_edge_bottom
0
print.printer_Lexmark_Z2300_Series.print_edge_left
0
print.printer_Lexmark_Z2300_Series.print_edge_right
0
print.printer_Lexmark_Z2300_Series.print_edge_top
0
print.printer_Lexmark_Z2300_Series.print_evenpages
true
print.printer_Lexmark_Z2300_Series.print_footercenter
print.printer_Lexmark_Z2300_Series.print_footerleft
&PT
print.printer_Lexmark_Z2300_Series.print_footerright
&D
print.printer_Lexmark_Z2300_Series.print_headercenter
print.printer_Lexmark_Z2300_Series.print_headerleft
&T
print.printer_Lexmark_Z2300_Series.print_headerright
&U
print.printer_Lexmark_Z2300_Series.print_in_color
true
print.printer_Lexmark_Z2300_Series.print_margin_bottom
0.5
print.printer_Lexmark_Z2300_Series.print_margin_left
0.5
print.printer_Lexmark_Z2300_Series.print_margin_right
0.5
print.printer_Lexmark_Z2300_Series.print_margin_top
0.5
print.printer_Lexmark_Z2300_Series.print_oddpages
true
print.printer_Lexmark_Z2300_Series.print_orientation
0
print.printer_Lexmark_Z2300_Series.print_page_delay
50
print.printer_Lexmark_Z2300_Series.print_pagedelay
500
print.printer_Lexmark_Z2300_Series.print_paper_data
1
print.printer_Lexmark_Z2300_Series.print_paper_height
11.00
print.printer_Lexmark_Z2300_Series.print_paper_size_type
0
print.printer_Lexmark_Z2300_Series.print_paper_size_unit
0
print.printer_Lexmark_Z2300_Series.print_paper_width
8.50
print.printer_Lexmark_Z2300_Series.print_reversed
false
print.printer_Lexmark_Z2300_Series.print_scaling
1.00
print.printer_Lexmark_Z2300_Series.print_shrink_to_fit
true
print.printer_Lexmark_Z2300_Series.print_to_file
false
print.printer_Lexmark_Z2300_Series.print_unwriteable_margin_bottom
0
print.printer_Lexmark_Z2300_Series.print_unwriteable_margin_left
0
print.printer_Lexmark_Z2300_Series.print_unwriteable_margin_right
0
print.printer_Lexmark_Z2300_Series.print_unwriteable_margin_top
0
privacy.sanitize.migrateFx3Prefs
true
security.warn_viewing_mixed
false
user.js Preferences
Your profile folder contains a
user.js file, which includes preferences that were not created by Firefox.
Graphics
Adapter Description
ATI Radeon X1200 Series
Adapter Drivers
atiumdag atiumdva atitmmxx
Adapter RAM
Unknown
Device ID
0x791f
Direct2D Enabled
Blocked for your graphics driver version. Try updating your graphics driver to version 10.6 or newer.
DirectWrite Enabled
false (7.0.6002.18592)
Driver Date
2-10-2010
Driver Version
8.593.100.0
GPU #2 Active
false
GPU Accelerated Windows
0/1 Basic Blocked for your graphics driver version. Try updating your graphics driver to version 10.6 or newer.
Vendor ID
0x1002
WebGL Renderer
Blocked for your graphics driver version. Try updating your graphics driver to version 10.6 or newer.
AzureCanvasBackend
cairo
AzureContentBackend
none
AzureFallbackCanvasBackend
none
JavaScript
Incremental GC
true
Accessibility
Activated
true
Prevent Accessibility
0
Library Versions
Expected minimum version
Version in use
NSPR
4.9.5
4.9.5
NSS
3.14.3.0 Basic ECC
3.14.3.0 Basic ECC
NSSSMIME
3.14.3.0 Basic ECC
3.14.3.0 Basic ECC
NSSSSL
3.14.3.0 Basic ECC
3.14.3.0 Basic ECC
NSSUTIL
3.14.3.0
3.14.3.0Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you. -
Clients upgraded with CU3 still shown with lower version from SCCM console
Hello,
A couple of months ago, I upgraded all my clients with CU3.
As I still have about 2% of clients not shown as upgraded to CU3 when I look in the console, I started to investigate on client side. It appears those clients properly got the upgrade. From control panel, I can see the CU3 version is displayed.
Any idea why the version is not correctly reported from the console ?
Regards.The client should provide that information after a heartbeat discovery. Could it be that those clients missed a few heartbeats? If so, trigger them and the information should update.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude -
Database auto start with machine on and shutdown with machine shutdown
i have installed oracle 10g release 2 on linux 5.1. now i want to start my database with machine on and shut down when the machine is shutdown.
for this i have do the following steps but i does not works.
Log in as the root user
vi /etc/oratab
$ORACLE_SID are not allowed.
orcl:/u01/app/oracle/product/10.2.0/db_1:Y
change the directory to /etc/init.d
Create a file called dbora, and copy the following lines into this file:
vi dbora
#! /bin/sh -x
# Change the value of ORACLE_HOME to specify the correct Oracle home
# directory for your installation.
ORACLE_HOME=/u01/app/oracle/product/10.2.0/db_1
# Change the value of ORACLE to the login name of the
# oracle owner at your site.
ORACLE=oracle
PATH=${PATH}:$ORACLE_HOME/bin
HOST=`hostname`
PLATFORM=`uname`
export ORACLE_HOME PATH
if [ ! "$2" = "ORA_DB" ] ; then
if [ "$PLATFORM" = "HP-UX" ] ; then
remsh $HOST -l $ORACLE -n "$0 $1 ORA_DB"
exit
else
rsh $HOST -l $ORACLE $0 $1 ORA_DB
exit
fi
fi
case $1 in
'start')
if [ "$PLATFORM" = "Linux" ] ; then
touch /var/lock/subsys/dbora
fi
$ORACLE_HOME/bin/dbstart $ORACLE_HOME &
'stop')
$ORACLE_HOME/bin/dbshut $ORACLE_HOME &
echo "usage: $0 {start|stop}"
exit
esac
Change the group of the dbora file to the OSDBA group (typically dba), and set the permissions to 750:
# chgrp dba dbora
# chmod 750 dbora
Create symbolic links to the dbora script in the appropriate run-level script directories as follows.
# ln -s /etc/init.d/dbora /etc/rc.d/rc0.d/K01dbora
# ln -s /etc/init.d/dbora /etc/rc.d/rc3.d/S99dbora
# ln -s /etc/init.d/dbora /etc/rc.d/rc5.d/S99dbora
after done these changes i restarted my system but the database is not started automatically.....
please help where i am doing wrong...and correct me..Re: Oracle 10g on linux 5.1 issue
DUPLICATE! -
'Downgrade' iTunes - Library does not open with lower version
I am working with Vector Works 11.5 which requires Quicktime 6.5.1 (it also works with 7.4.3.1). I upgraded my iTunes to the latest version and Vector Works couldn't deal with it. I had to remove Quicktime and reinstall an older version to comply with my Vector Works.
The new version of iTunes obviously couldn't work with the older Quicktime and I installed an older iTunes as well.
My problem now is that I am not able to open iTunes, because the file iTunes Library.itl, which I assume to be the music library can not be read. Is there a way to 'downgrade' the whole setup or to reset the library? I've tried older libraries in the music folder, but that did not solve the problem.
Thanks for any help,
jessieRename the current library, open iTunes, and drag the folder containing the old library into the open iTunes window. This will not preserve ratings, playcounts, and other metadata.
(30320) -
Saving for Other Users with lower versions of Adobe
I have created a form using Adobe Designer 7 that I am sending to other users. These other users have a mix of older versions of Adobe (5 & 6) and less powerful versions (Reader and Standard). They have not been able to open the form, much less use it. How can I save my file so that they are able to open the form and use it?
Forms designed with Acrobat 6 and below are called "Acro Forms". Forms designed with Form Designer 6 and Acrobat Professional 7 's Form designer are "XFA forms".
Acro Forms will still be supported for some time, but the reality is that XFA forms will be what is used in all future releases. XFA forms do have advantages, such as XML, and data packages. Just take a look at the Designer. Much more simple than Acrobat. -
TS3276 how do i rebuild the database when starting up Mail version 5.2?
Having real problems with Mail. Sent a large attachment earlier today which is now in a 'Recovered Message' folder. Since then I can't send or receive any emails from any account, ie BT Yahoo, via Mail, although I can do this from the internet at BT Yahoo. A friend suggested 'rebuilding the database' by holding down certain keys at launch of Mail. Will this work and if so what are the keys to hold down?
Many thanksYou can rebuild your mailbox by selecting the mailbox and then selecting the menu item "Mailbox >> Rebuild".
You can optimize your mailbox by "vacuuming" the databases too (huge improvement). Open Termina.app and use:
*/usr/bin/sqlite3 ~/Library/Mail/Envelope\ Index vacuum*
Personally, I do it with AppleScript:
*tell application "System Events"*
*set mailIsRunning to (name of processes) contains "Mail"*
*end tell*
*if mailIsRunning then tell application "Mail" to quit*
*do shell script "/usr/bin/sqlite3 ~/Library/Mail/'Envelope Index' vacuum"*
*if mailIsRunning then tell application "Mail" to activate*
Message was edited by: J D McIninch -
Getting started with trial version of Adobe XI
I downloaded the trial version of Adobe XI. Once installed I attempted to convert a PDF document into a Word document by clicking on the "tools" as instructed in the tutorial. I then chose convert to "Microsoft Work" and clicked on "convert". A box then popped up asking me to purchase a year long subscription to be unlimited downloads. I don't want to make that purchase and the pop up box asking that I purchase the subscription will not go away nor and when I click on "convert" again, it does nothing.
What do you mean by "Adobe XI"?
You seem to be mixing up two entirely different ways to go from PDF to Word, because you have elements of both of them in your question. -
Import Error - while trying higher to lower version
When I try to import dump from -
Version 10.2.0.1.0 to Version 10.1.0.2.0 ; i'm getting error as
==>
IMP-00058: ORACLE error 6550 encountered
ORA-06550: line 1, column 33:
PLS-00302: component 'SET_NO_OUTLINES' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
IMP-00000: Import terminated unsuccessfully
==>
pls suggest me how import the dumpt.
Subir...then import with lower version againThe official way should be export with the lowest version of export utility, but import with the import utility in the same version of the target database (where you are importing).
Metalink note 132904.1
Nicolas.
Maybe you are looking for
-
Hi all, Please advise if there is a table that will only show the TOTAL BALANCE of the vendor? without the vendor line items. Many thanks in advance =)
-
Sql loder external_table=generate_only
Hi, In Oracle 11g SQLLDR has the following command line option EXTERNAL_TABLE = GENERATE_ONLY which, when you give it an old-fashioned SQLLDR control file, will spit out the External Table equivalent in the log file. sqlldr lodusr@proddb control=co
-
CS4 Design Standard doesn't qualify
Hello, I am trying to upgrade from CS4 to CC for a special offer 36,89 euro per month. When I type in my SN the browser says that I don't qualify for the special membership plan. Could you help please? I don't have student version, or anything like t
-
Incompatibility acrobat 6 and windows 8
any suggestions please on how to solve the incompatibility between acrobat 6 and windows 8. thanks
-
Checking for cancel in a JOptionPane
Hey, I've been learning Java for about 2 months or so now, know quite a lot of the basics but i'va ran into a problem. Im doing a program which takes in some user input using: double d = Double.parseDouble(JOptionPane.showInputDialog("Enter a number"